Related
Greetings,
I want to be able to seamlessly switch from CM7 to MIUI to Sense, etc., keeping all of my settings, apps, etc for each setup. I assumed that I can do this by simply configuring each and doing Nandroid backups. But, when I try to restore my Myn's backup, I get an error.
Anyone know the proper procedure rom-hopping like this?
Thanks!
mike
1. Backup current apps and data in titanium backup
2. In recovery, backup current rom
3. Full wipe [factory/data, cache, dalvik]
4. Flash rom, reboot.
5. When booted into new rom, restore apps and data, NOT system settings.
6.
And if you want to switch back, go to recovery, backup current rom, then restore the backup you want; no need to wipe.
Also you'll get restore errors if you renamed the folder using invalid characters, or its corrupted.
Yes, you can just keep nandroid backups of each ROM you like after you get them set up and running how you want. Then you can restore whatever setup you feel like that day.
You can also back up your apps w/ titanium, that way if you install any new apps, when you restore another ROM, you can use ti to restore any missing apps that you've installed since the backup was made.
To the OP, your post is incomplete without the error message
Your steps seem like the proper way to go between roms. What you need to be aware of is, some apps store their data on the sdcard. Depending what is stored, you may get issues. Beautiful wigets comes to mind. It stores the skins on the sd card.
Are you getting error messages restoring from the backup image itself? What error. Are your image files intact?
Might be your version of recovery. I had a problem going from CM7 to anything else. I switched the recovery version in Rom Manager and fixed it
Sorry, I overlooked that. What error are you getting?
1. What % was your battery at? If it's below 30-40%, it won't restore or backup.
2. Have you renamed the backup? You can only use certain punctuation in the names or it won't work.
teh roxxorz said:
1. Backup current apps and data in titanium backup
2. In recovery, backup current rom
3. Full wipe [factory/data, cache, dalvik]
4. Flash rom, reboot.
5. When booted into new rom, restore apps and data, NOT system settings.
6.
And if you want to switch back, go to recovery, backup current rom, then restore the backup you want; no need to wipe.
Also you'll get restore errors if you renamed the folder using invalid characters, or its corrupted.
Click to expand...
Click to collapse
Good advice. One thing I'm curious about though. When you do a rom backup, it saves your apps/data etc. anyway, right? When you "restore" a ROM everything is exactly like you had it. So why is it necessary to do a Titanium Backup of all your apps/data (other than prudent good practice obviously) when your ROM backup will have the same. Is there another reason I'm missing?
Second, when you say backup "apps + data" but NOT system settings, what exactly do you mean? When you do a batch backup w/ Titanium Backup you can choose to do Apps or Apps + all system data. How can you quickly and easily backup apps + app data without all system settings? Manually go in and select certain (green) system data?
I do it in case I download any new apps while on one ROM that may not be included in my nand backup.
I don't restore app data, but theoretically you could restore the newer app data as well.
Alpine- said:
Good advice. One thing I'm curious about though. When you do a rom backup, it saves your apps/data etc. anyway, right? When you "restore" a ROM everything is exactly like you had it. So why is it necessary to do a Titanium Backup of all your apps/data (other than prudent good practice obviously) when your ROM backup will have the same. Is there another reason I'm missing?
Second, when you say backup "apps + data" but NOT system settings, what exactly do you mean? When you do a batch backup w/ Titanium Backup you can choose to do Apps or Apps + all system data. How can you quickly and easily backup apps + app data without all system settings? Manually go in and select certain (green) system data?
Click to expand...
Click to collapse
The reason for backing up your apps and data is because when you install a new rom, like going from CM7 > MIUI, you should always do a full wipe, which will erase your user apps; erases all phone content. When you boot into the new rom, the titanium backup data is on the sdcard, and can be restored from there; that's why. And doing a full wipe when flashing a new rom kills off a lot of problems, like random fcs, ect.
No, you do the batch operation for backup user apps + system data, just to be safe that you get the data for the apps. That makes it easiest. When you RESTORE, you go into batch, there's an option for restore only user apps and data, right above apps + system data.
What are you guys using to back up your phones when switching Roms? I want to back up contacts, wifi settings, APPs etc.
If I'm switching ROMs I set them up from scratch again, after doing a Nandroid of the current one
Titanium Backup works really well. It's on the market. Probably on here somewhere also.
Will Titanium restore your screens? Its a bit tiring getting them alls setup and then starting from scratch on my droid incredible I never really set up the phone because I switched Roms so often.
veli69 said:
What are you guys using to back up your phones when switching Roms? I want to back up contacts, wifi settings, APPs etc.
Click to expand...
Click to collapse
Use google for contacts and wifi settings, apps Titanium Backup
Sent from my Galaxy Nexus using XDA App
veli69 said:
Will Titanium restore your screens? Its a bit tiring getting them alls setup and then starting from scratch on my droid incredible I never really set up the phone because I switched Roms so often.
Click to expand...
Click to collapse
Alright, so for backing up your system you're going to want to use CWM and make a NANDROID backup. After you're done with that you will probably want to back up your apps. To back up app as well as data (such as angry birds scores) you will want to use Titanium Backup. Just remember not to restore system data, just apps/app data after flashing your ROM/Kernel.
For contacts (assuming you are on verizon) you had the option to chose where you store your contacts. Those options were either in your Gmail account or in "Backup manger" if you cant figure out where they are you can always make a file with all your contacts and place it on your SD card by going to the People App>menu>import/export>Export to storage.
As far as wifi settings go i am not aware of a way to do so.
And if you wanted to keep the launcher as it is (like where your apps are, folder, widgets, etc.) you will have to be on a custom launcher such as ADW or GoLauncher. This happens because the launcher is an app and when the app data is restored (from titanium backup) the placement of things are exactly how they were when you made the backup!
1) Nandroid. Always nanroid just to be safe - if something breaks, you need to have a working build to fall back on .
2) Contacts - I don't worry about it - they should all be synced with your Google account anyhoo.
3) Wifi settings - should also be synced with your Google account, and will be automatically restored when you set up the new ROM (assuming you tick the "restore data to my device" option in the google account setup screen).
4) Apps - TitaniumBackup for apps and data - not for system data though.
5) Launcher - some launchers will have an option built-in for backing up and restoring your screen layouts, folders, etc. Widgets will rarely be able to be restored no matter what method you use. You can also use Titanium to explicitly back up and restore your launcher's data - if you're still on the stock launcher, filter for System apps and look for an entry that starts out "[DESKTOP] Launcher ..." (it'll be in green) and backup/restore the data for that.
When you boot after first wipe it asks you for Google account details, then it will pull down your contacts, wifi settings etc. which we want.
But it also starts re-downloading all your Market apps, which we don't want because we've got them in Titanium Backup and we want to restore them with data (save games) and be linked to the Market for updates.
What's the correct way to handle this?
I've created issues before where some apps don't list in 'My apps' in the Market, and don't auto-update unless I search for them at which point it says 'Installed'.
I usually enable airplane mode immediately after the Google account setup, reboot, restore from titanium, reboot, and then turn the radios back on.
ClockworkMod Rom Manager. Its the best tool there is. yu can flash roms by pressing a simple button.
make sure you understand the difference between clockworkmod and titanium backup before you start modding your device. CWM will restore your phone exactly to how it was when you made the backup, everything from your screens, apps, setting, contacts, call and text logs. When you restore with CWM it will erase everything that was done after the backup point. Another thing to keep in mind is that you cant choose to restore specific things in CWM like you can with TB, you have to restore it all in one shot.
TB will restore apps, system apps and data associated with those apps. TB can also be used to backup settings, wifi access points and bluetooth pairings.
So if you get a bootloop or softbrick you have to use CWM. You need to do a factory reset/wipe before you flash a new rom, this is when you would use TB. Use TB to restore the apps, data and settings.
SMSbackup and calllogbackup in the market is also good for backing up or texts and call logs if you want to keep them. google will backup your contacts if you allow google to do this but you can always just save your contacts on your sim card
never ever restore system apps and data.
Especially if it was meant to be a full wipe.
Even then, clean start is always best so wipe and stop reporting bugs if you didn't do a wipe.
s2d4 said:
never ever restore system apps and data.
Especially if it was meant to be a full wipe.
Even then, clean start is always best so wipe and stop reporting bugs if you didn't do a wipe.
Click to expand...
Click to collapse
On that note, some data for system apps can be safely restored - just never do it as a batch process. If I'm going to try restoring any system data, I do another full nandroid first (just in case) and then restore data one at a time.
I'm shocked no one has mentioned this app yet. Appextractor let's you restore things from your nandroid, Obviously some things shouldn't be restored, but many things can be safely restored.
EKnofsky said:
I'm shocked no one has mentioned this app yet. Appextractor let's you restore things from your nandroid, Obviously some things shouldn't be restored, but many things can be safely restored.
Click to expand...
Click to collapse
The only problem I had with app extractor is the amount of SD storage space it uses - and doesn't automatically clean up. My nandroids are already ~2.7GB - I don't really want the whole thing also stored uncompressed. I quickly run out of storage space that way.
Oh, and it's painfully slow.
AppExtractor is useful if there's an important app you forgot to back up in Titanium, but doesn't really make sense to me as your primary restore method.
Isn't the Titanium data wiped when a new ROM is flashed? I assume that before flashing anything, copy the /sdcard directory to another computer?
And after flashing a new ROM, I assume that Ti has to be downloaded first in order to restore the other apps
thereddog said:
Isn't the Titanium data wiped when a new ROM is flashed? I assume that before flashing anything, copy the /sdcard directory to another computer?
And after flashing a new ROM, I assume that Ti has to be downloaded first in order to restore the other apps
Click to expand...
Click to collapse
Unless you're using the factory recovery, the Titanium data will remain intact. You will have to reinstall Titanium from the market - or use the tool built-in to Titanium to create a flashable *.zip. Just flash that *.zip before you boot your ROM the first time and you'll have Titanium pre-loaded.
use adb! works without root
adb backup [-f ] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosystem] []
- write an archive of the device's data to .
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
( is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore - restore device contents from the backup archive
example: adb backup -all -system -shared -apk
nitramz said:
use adb! works without root
Click to expand...
Click to collapse
Thanks for this. I had seen adb backup alluded to elsewhere but not a concise post detailing the usage. I'd rather not have to use my computer to handle backups, but it sounds like a pretty cool option.
Try MyBackup PRO. It does exactly what you need. I have used it before and it is good.
Can you nandroid restore for apps & settings on new ROM or new version of same ROM?
Many people (myself included) are "flash-happy" and install new ROMs or ROM updates very frequently. While I love flashing new stuff, I hate the process of getting my phone set up all over again. Titanium Backup is currently my go-to app for backing up apps and restoring them after a flash. Nova Launcher has been super-helpful in keeping my widgets. However, many apps don't work until you open them after a restore (1Weather, Adfree, LightFlow, Lux, etc). So generally, the following is my tedious process for flashing:
1. Assign labels in TiBU to the apps I want to restore and run "backup all apps + data"
2. Wipe Data, Cache, Dalvik, Battery Stats
3. Flash ROM, GApps, Kernel, etc. Fix permissions
4. Install TiBU and then painstakingly restore apps (only non-system), then restore data for those apps.
5. Open each app and configure where necessary
6. Go through all the ROM settings and set them the way I like (nav bar icon size, clock posiiton, battery icon, etc etc etc).
Just the thought of going through this whole process makes me hold off on flashing too often, and I usually end up saving flashes for when I have a big chunk of time. Some people, I've noticed, flash new ROMs like they've got nothing better to do. It makes me wonder... do they have some trick for quickly restoring their phones after each flash? Is there some way to condense or streamline steps 4-6 in my process?
A Nandroid backup saves the System and Data partitions. What info does each partition contain? I realize that each ROM is different and it might be problematic to restore settings of one ROM to another, but what if you're simply upgrading to a newer version of the same ROM? I'm wondering if I can make a nandroid backup of CNA 3.6.6 and then restore only the Data partition after flashing CNA 3.8.0 so that the new ROM is in place but all the apps and settings are restored from the previous setup. If this does work, is it stable and smooth?
Or if I'm completely off about using Nandroid for this purpose, does anyone have any methods for getting back up to speed quickly after flashing new ROMs?
In titanium backup you can go to settings > create update.zip so next time you flash a new rom gapps etc you can install the update.zip as well and have TiBu off the back. If you have the pro key it will be more beneficial to you. You do have to log into you google account if you have the pro key before opening TiBu. I use Paranoid Android and I can backup my rom settings idk how CNA does it. That one you might have to manually do.
Between ROM updates you don't have to wipe data. Just Cache and dalvik.
I have recovered my data partition between wipes before but stopped because everytime I update or flash a new rom I usually go for a new look.
Here is my process between flashing new roms
1. Backup everything in TiBu (I already have the update.zip so I skip that. You only need to do it once or if the app gets updated)
2. Go into recovery wipe data, system, cache, dalvik
3. Install rom, gapps, kernel, TiBu
4. Restart
5. Load up sign into google account
6. Open TiBu and restore everything
Some apps naturally won't restore everything like Adfree for example will put the hosts file in your system for you, when you back that app up your only backing up the settings. When you back it up it only backs up the settings. Dropbox and Skydrive I have to manually sign back in. I never had lightflow so I don't know how that works. Its a little tedious but I usually give a rom a few hours before I actually go through all that.
Hope it helps
If you don't want to have to log in to your Google account before using the full version of Titanium Backup, just use App2Zip to make a flashable zip of TiBu and its Pro key. Then just flash it last, boot, and batch restore the rest of your apps and data.
Subscribed
I want to hop to a new ROM, but it is a real pain to restore everything. Is there a quick way?
I am on Wompasaurus. Before was LJ1 stock rooted then MA7 DeOdexed then Womp. I want to try some more but hours and hours it takes to get everything running is ridiculous.
I have Titanium Backup, TWRP(GooManager), ROM Manager, ROM Toolbox and SManager. If I need something else, I get it.
SIDE NOTE: I was able to backup the 4.2 Gallery. But Titanium backup cannot find the 4.2 Camera.
Lord Sekhmet said:
I want to hop to a new ROM, but it is a real pain to restore everything. Is there a quick way?
I am on Wompasaurus. Before was LJ1 stock rooted then MA7 DeOdexed then Womp. I want to try some more but hours and hours it takes to get everything running is ridiculous.
I have Titanium Backup, TWRP(GooManager), ROM Manager, ROM Toolbox and SManager. If I need something else, I get it.
SIDE NOTE: I was able to backup the 4.2 Gallery. But Titanium backup cannot find the 4.2 Camera.
Click to expand...
Click to collapse
I use Titanium Backup and Backup Your Mobile. Titanuim backup for apps and data. Backup Your Mobile for call logs, sms, mms, user data dictionary and wifi networks. I believe ROM Toolbox will do all of that and more. However just make sure that you save your backups to external sd and not internal sd as you will lose them if you do a full wipe of internal memory when you switch ROMs.
Sent from my SPH-L900 using xda app-developers app
Small problem. I use extsd2internalsd2.
Where should I put the backup?. Currently I transfer all my backups to my desktop.
EDIT : I installed Backup Your Mobile and ran it. THANKS!!
Lord Sekhmet said:
Small problem. I use extsd2internalsd2.
Where should I put the backup?. Currently I transfer all my backups to my desktop.
EDIT : I installed Backup Your Mobile and ran it. THANKS!!
Click to expand...
Click to collapse
Extsd is your external sd which is where you want to keep your backups as well as always keeping a copy some where else like a desktop.
Sent from my SPH-L900 using xda app-developers app
In case anyone is reading my thread for help / ideas, I figured out a shortcut.
When every app is working, use TB Batch Action -user apps. Save this to some place safe. Before doing a full wipe re-backup apps with changing data . i,e. games
After you get your ROM setup exactly like you want it go into twrp go to backup and make a nandroid backup. Backup your data, boot, and system I believe they are. (The first three options) choose the option to compress the backup as it will save it the exact same way just save space by compressing it and shaving 40-50% off the size.
Then after it says backup wad successful. Reboot system. Use ROM toolbox and backup all your user apps+data. Then go to your contacts choose export to sd.. Make a"V card" export all your contacts to your sd. Then download sms backup&restore app.. backup all your texts. Then after these steps are done reboot to recovery (TWRP) go to wipe and wipe (assuming you already have other ROM zips on your sd or external sd saved and ready to flash) wipe cache, Dalvik cache, system, factory reset, system, factory reset.. In that order. Back out to main TWRP menu. .
Choose Install and install your ROM zip of your choice. After it installs successfully and reboots setup your phone and get to home screen. Go to market install rom toolbox again. After that is installed open and scroll to backups. Restore all Apps+data that you want. While that's restoring open contacts choose import from sd.. choose vcard files... choose the one you just made and restore...
Once your apps restore open sms backup&restore them restore your texts... setup any thing else you want/need widgets settings options etc..
After the new ROM is setup to your liking. Scroll back to the top and repeat till you have solid Nandroid backups (Twrp backups) of all the ROM'S you want.
Then anytime you want to change between then you reboot to recovery (twrp) wipe with above said method then hit restore choose the ROM you want to restore to and voila you'll literally be where you left off to a T even the same messages and websites still open... Only thing you might want to do between nandroid flashes is backup any NEW apps you downloaded recently. Our make a new backups of text messages with sms backup&restore if you want your texts always up to date...
If this helped which I hope it did cause its laid out, then hit the Thanks button:good:
Have a great afternoon
-Tw1steD
Hello, I have CWM for long time but that's second time when I used it to restore my stock firmware with apps from a backup made before changing a ROM.
I was using Cyanogenmod 12.1 and before it I did backup of my stock firmware by CWM.
The problem is, when I did restore from a backup, It restored system well, but ... not exactly data.
System booted well, but I don't see any of my apps. Hovewer, when I check in App Manager, I see many apps that i HAD installed but they are shown as 0,00 B weight and have "android" icon.
Memory of my phone is filled as same as when I did backup but apps don't show.
How should I use restore from backup to restore entire system well?
Go to recovery and wipe data,cache and dalvik. Then use advance restore option to restore data and cache.
Now data should work but I recommend using folder mount or sd fix to modify the sdcard restrictions on stock kitkat.