im using ncx 099a kernel and since i flash these kernel, the screen sometimes flicker like hell......this is happen when im palying game and then it continue to shake the display...when im trying a force reboot to bootloader, the screen died only vibrate...but when im push longer it go to bootloader mode ok...try to restore nandroid but still the same..
and some other times, there are strange pixel color showing up....
i try to fix this by OV my phone a little...and now everythings fine...
my question is, is UV or maybe any other setting to kernel or rom will have this massive effect on our phone...
No
No not until u underclock it to extreme levels.
aman360elite said:
No not until u underclock it to extreme levels.
Click to expand...
Click to collapse
underclock...mine is lowest to 51mhz max to 1300mhz....this is the setting from the kernel
undervolt...i think not that extreme...i have been using the same setting even when in my evo 3d...just -50mv from original mv..
Related
Hi
I have permroot and s/off my phone using gfree method and i flashed a kernal
that i downloaded (Cyanogen Kernel v1.3) the kernal allows overclocking upto over 1400 mhz ,at 1094 mhz everything is fine and my phone is stable but as soon as i set the frequency over that using setCPU my phone freezes ,i dont know what i am doing wrong this is the first time i tried overclocking a phone ,i hope i am wrong but i am thinking since every cpu is unique maybe thats the max mine can handle ??? i apprentice any tips, advise , help ,suggestions
Thanks.
i have also tried EZDZ_Godspeed_update03 but using this kernal my phone doesnt even boot up it crashes immediately when i turn my phone on.
bahmanxda said:
Hi
I have permroot and s/off my phone using gfree method and i flashed a kernal
that i downloaded (Cyanogen Kernel v1.3) the kernal allows overclocking upto over 1400 mhz ,at 1094 mhz everything is fine and my phone is stable but as soon as i set the frequency over that using setCPU my phone freezes ,i dont know what i am doing wrong this is the first time i tried overclocking a phone ,i hope i am wrong but i am thinking since every cpu is unique maybe thats the max mine can handle ??? i apprentice any tips, advise , help ,suggestions
Thanks.
i have also tried EZDZ_Godspeed_update03 but using this kernal my phone doesnt even boot up it crashes immediately when i turn my phone on.
Click to expand...
Click to collapse
You might be right. Not every CPU is created equal and since the phone is only supposed to run 800Mhz you can't exactly complain that it "only" does ~1.1ghz
On the other hand a little more juice can make a reluctant CPU run a little faster. I'm not sure how the voltage tables work out for different Kernels but you might want to look in to that. The higher the voltage, the better the chance your OC will work, typically.
That's true, every cpu is unique. But for now, since the kernels are still going through development, I would assume it's perfectly fine that overclocked speeds are still quite unstable
Thanks for the replys i am not really complaining i just wanna make sure that i havnt messed up somewhere i thought the crashing might be happening because i messed something up or maybe it happend to others and its a common problem or there is a fix for it .
Also i would appreciate it if someone could put me in the right direction in regard to changing the voltage.
Sent from my HTC Vision using XDA App
just wipe my original stock sense rom and flashed it with virtuous-vision_froyo_rom-v0.8.0 and applied all the patches but still the same problem
my phone freezes instantly as soon as i change it to just over 1100 mhz
its so strange its very very stable at 1094 mhz hasnt crashed even once.
any ideas?
The current overclock kernel that Flippy has over in Development (1.4) causes my phone to freeze when I'm trying to play Angry Birds. CyanogenMod's kernel runs it at 1.4Ghz, and I'm using an older, more stable version of Flippy's kernel.
bahmanxda said:
just wipe my original stock sense rom and flashed it with virtuous-vision_froyo_rom-v0.8.0 and applied all the patches but still the same problem
my phone freezes instantly as soon as i change it to just over 1100 mhz
its so strange its very very stable at 1094 mhz hasnt crashed even once.
any ideas?
Click to expand...
Click to collapse
It could be simply that your CPU isn't capable of over-clocking that high. Its hard to say as the kernels are still being developed but the ability to overclock a processor can vary greatly from unit to unit...
I have CM 6.1 and the last few days I have been running my phone at 1017 to compare the performance difference against the 1497 and thus far, I haven't really seen a drastic difference... That may change as the Gingerbread based ROMS start to trickle out but for now 1ghz seems like plenty of power.
You could always try a different kernel and see if it yields different results.
bahmanxda said:
Hi
I have permroot and s/off my phone using gfree method and i flashed a kernal
that i downloaded (Cyanogen Kernel v1.3) the kernal allows overclocking upto over 1400 mhz ,at 1094 mhz everything is fine and my phone is stable but as soon as i set the frequency over that using setCPU my phone freezes ,i dont know what i am doing wrong this is the first time i tried overclocking a phone ,i hope i am wrong but i am thinking since every cpu is unique maybe thats the max mine can handle ??? i apprentice any tips, advise , help ,suggestions
Thanks.
i have also tried EZDZ_Godspeed_update03 but using this kernal my phone doesnt even boot up it crashes immediately when i turn my phone on.
Click to expand...
Click to collapse
you should check/edit the overclock scripts..
I found wrong configuration script (650 Mhz using Androidiani OR)
So i just swiched from virtouos ROM (sense) to CM6.1 and i am having a problem.
when i first flashed virtouos, sometimes my phone screen wouldnt turn on with
first attempt but after setting profiles on setCPU it was fixed and didnt happen anymore now with CM6.1 i am having a slightly different problem the screen doesnt turn on when i am receiving a call (it rings though) and i have to press the power button couple of times to get the screen on. i have already set some profiles on setCPU ,i am just wondering if there is any fix for it ?
Thanks
Only thing anyone can probably suggest is turning up your min clock speed. What are your profiles set to?
My screen off is 245/368 just to give it that bit extra to guarantee no wakeup issues, not that I had any to begin with, better safe than wanting to throw her up the wall (I get annoyed easy).
bahmanxda said:
So i just swiched from virtouos ROM (sense) to CM6.1 and i am having a problem.
when i first flashed virtouos, sometimes my phone screen wouldnt turn on with
first attempt but after setting profiles on setCPU it was fixed and didnt happen anymore now with CM6.1 i am having a slightly different problem the screen doesnt turn on when i am receiving a call (it rings though) and i have to press the power button couple of times to get the screen on. i have already set some profiles on setCPU ,i am just wondering if there is any fix for it ?
Thanks
Click to expand...
Click to collapse
Doesn't sound normal... did you make ANY customizations at all? Or did you install CM straight up and just use it like that? Any adjustment to "performance settings" or CPU clocking? What SPL and radio do you have installed?
Possible explination posted here by rmk40:
http://forum.xda-developers.com/showthread.php?t=884237
dhkr123 said:
Doesn't sound normal... did you make ANY customizations at all? Or did you install CM straight up and just use it like that? Any adjustment to "performance settings" or CPU clocking? What SPL and radio do you have installed?
Click to expand...
Click to collapse
Thanks
no i didnt make any customization its just CM6.1 although my max clock speed is at 1497 mhz
setCPU
Screen off max 368
min 245
and profiles for temp and battery as well
the wierd thing is it doesnt happen at all when im just waking the phone up it only happens when its ringing i am thinking its my CPU issue ,i dont think it handles overclocking well ,i couldnt go over 1.1ghz (it would freeze instantly) with virouos that was the main reason i switched im gonna play with with cpu profiles for a while and see if i can get it fixed.
btw i have never flashed any radio so im guessing its the stock one
wow this is very intreasting its actually fine without any setCPU profiles
i had something totally different in my mind.
bahmanxda said:
wow this is very intreasting its actually fine without any setCPU profiles
i had something totally different in my mind.
Click to expand...
Click to collapse
With my experience I've noticed the phone runs better, and lasts longer on a single charge WITHOUT setCPU profiles. Just my opinion
bahmanxda said:
although my max clock speed is at 1497 mhz
setCPU
Click to expand...
Click to collapse
And there you have it. Overclocking can do weird things.
dhkr123 said:
And there you have it. Overclocking can do weird things.
Click to expand...
Click to collapse
Fair enough
Sent from my HTC Vision using XDA App
I flashed cm 6.1.2 and the wimax light flashes periodically, why? And why does the battery light turn green when the battery is Only charged to 90%?
Sent From Tapatalk.
Don't know about the battery.
But the wimax light is used for notifications in CM
The wimax light is used as your notification light in place of the normal notification light. This is beneficial because you can see if you have a message if your phone is charging.
The light turns green at 90% because the battery is basically charged at this point. HTC's own charging cycle will go to 100% then back to 90% and back to 100% etc. so they obviously think 90% is fully charged as well.
Oh.. i see.. i see. Thanks for your input guys! I appreciate it. Also, can i use set cpu with cm 6.1.2? Because whenever i overclock to 1031mhz or something higher, it keeps restarting.
Sent From Tapatalk.
You can use setcpu, but it appears that frequency is a little too high for your phone.
I wonder why it was restarting before. Its not doing it anymore.
Sent From Tapatalk.
Last question. Does anyone know of collin ph is compactible with cm 6.1.2?
Sent From Tapatalk.
Jason Black said:
Oh.. i see.. i see. Thanks for your input guys! I appreciate it. Also, can i use set cpu with cm 6.1.2? Because whenever i overclock to 1031mhz or something higher, it keeps restarting.
Sent From Tapatalk.
Click to expand...
Click to collapse
What kernel are you using? The stock kernel does not support overclocking, and is probably causing your problem. I use the snap kernel with CFS, and have my phone overclocked with setcpu to 1190 mhz on CM6.1.2
Muellersirch said:
What kernel are you using? The stock kernel does not support overclocking, and is probably causing your problem. I use the snap kernel with CFS, and have my phone overclocked with setcpu to 1190 mhz on CM6.1.2
Click to expand...
Click to collapse
The stock kernel supports overclocking just fine. Some phones are just a little picky on overclocking. When I first discovered phone overclocking I was up on 1113MHz performance while screen on, 245MHz powersave while screen off. I got pretty good battery life actually, but I change to 998MHz Conservative while screen on and it's so much better battery and I don't notice any difference.
I'll crank it up to benchmark kernels, but there really isn't much of a need for it (maybe for playing games) and it can cause these random reboots that get irritating.
Muellersirch said:
What kernel are you using? The stock kernel does not support overclocking, and is probably causing your problem. I use the snap kernel with CFS, and have my phone overclocked with setcpu to 1190 mhz on CM6.1.2
Click to expand...
Click to collapse
Im using the default kernel that came with 6.1.2.
Also, how do you check system sleep and uptime on cm 612?
Anyone trying collin ph? If so, what kernel do you have?
And to contribute. I think its an issue with the rom because i was running 1190mhz on myn just fine.
Sent From Tapatalk.
Sometimes when I lock my phone, the screen is unable to comeback up again when i try to unlock it. It just faintly appears when i press the power button but then dissapears back to a black screen. I am able to control (unlock etc, can feel the vibrations and stuff) but there is nothing on the screen. only after about 15-30 mins will the screen recover. Is there anyway to fix this?
This is generally related to governor of your CPU. At least I've fixed that problem by setting greater minimum MHz value in my tablet and experimenting governors.
Are you using any custom roms / kernels ?
could be due to undervolting as well
Djabolic said:
This is generally related to governor of your CPU. At least I've fixed that problem by setting greater minimum MHz value in my tablet and experimenting governors.
Are you using any custom roms / kernels ?
Click to expand...
Click to collapse
Yep currently on BAMF but happened on androidme too. My setcpu sleep profile is at lowest mhz and ondemand. Using franco latest nightly.
crixley said:
could be due to undervolting as well
Click to expand...
Click to collapse
I dont do any under volting.
I am running Pac Rom 10/8 and every few hours I'll get a black screen when trying to turn the screen on and I am forced to hard reboot the phone. Anyone else having this problem? I want to know if it is a common problem with 4.3 roms since I never had this happen when I was running ZVC. I even clean installed 10/8 and didn't dirty flash to update it.
ever mess with kernel settings? thats called sleep of death
javskies said:
ever mess with kernel settings? thats called sleep of death
Click to expand...
Click to collapse
Yes I have it set to 384/1026 intellidemand, eco mode on, intelli plug on, temperature throttle on, gpu 320 ondemand