CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CyanogenMod 10.1
Sauce: https://github.com/CyanogenMod
Downloads
ROM: http://goo.im/devs/cdesai/cm/
Google Apps: 1 2
Installation
Note: this ROM uses the same partition layout as recent CM10 builds.
Do a Nandroid Backup!
Install the ROM using ClockworkMod Recovery
Optionally install the Google Addon
Known Issues
Bootanimation looks weird for the first few seconds.
Change Log
20121206
Initial release
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
EDIT: Builds for all 4 variants up.
Manly tears, My Tab is ALIVE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
huge thanks to all the developers working on this.
Photosphere works?
Will be testing this out right now on mine Thanks for all the hard work!
12-6 11:52 AM CST: Thanks! Downloading now!
12-6 1:10 PM CST: Attached 1st+2nd run FULL+Warning+Error filtered versions. (no crash's or issues, attached for due diligence of first run browsing)
12-6 1:15 PM CST: Attached 3rd run FULL+Error filtered logcat. (no crash's or issues, attached for due diligence)
12-6 3:25 PM CST: First random reboot, had logcat attached the entire time, didnt catch anything, attempting to get dmsg
12-6 3:35 PM CST: dmesg attached, but dont know if it will be helpful*...
12-6 4:15 PM CST: another dmesg after crash, was just hitting the back button out of YouTube...
12-7 11:15 AM CST: Added note about rotation issue
12-12 2:10 AM CST: Added logcat/dmesg's in relation to the Google Now/Sound Recorder**
BACON!
So far:
Not working:
-Bluetooth | Known 12-6-2012
-Automatic Backlight | Known since CM9
-Torch aka flashlight | Works, Extreme enable delay, 3-10 sec
-Camera/Video | Auto Flash broken, no resolution/advanced options
-Manual Rotation/Orientation reverse | landscape rotation is reversed/wrong, 270 instead of 90
Working:
+Auto Rotation | another poster said it didn't work, but it works for me
+Clock | another poster said it didnt work, but it works for me
+Market+Google Stuff | download and install of an App was successful + run
+Camera/Video | Front+Back regular pictures + manual flash
Notes:
~Boot Animation is Landscape only | Known 12-6-2012
~Everything I was able to test in 20min aside from the above, worked fine
~Its been a minor irritant since CM9, but the Galaxy Tab settings always has TV out as PAL***
~While I do not have service currently, It does show signal strength, and does show carrier info
*first post should be updated to note if doing the dmesg command on the device it should be dmesg > sdcard/dmesg.txt
**It doesnt always happen using Sound Recorder, but so far, each time I have launched Google Search (aka Google Now) moments after launch when it seems like its initiating, it locks up the tablet, there was one time I was able to use it, but I havent been able to replicate that good luck all day/night last night attached is the error's from logcat (I didnt see anything) and the 3 dmesg's I tried to capture after the device rebooted from the crash/shutdown
***I have the P1C or the CDMA variant, the Verizon Galaxy Tab, AFAIK, its a US device, always NTSC never PAL, am curious to know if the default can be changed PER device/model, if not, I understand seeing as the forums at least seem to be devoid of many other CDMA users vs GSM users.
So far
WORKING:
-WiFi: WPA2 seems to be not supported or my channel has been setted up wrong! (i cant contect to my wlan )
-Auto Rotation
-GPS
-Mobile Data (RIL)
-Display Rendering
-3D (played GTA III on it, works very well)
-Clock works fine
-Camera (no flashlight -.-)
-Gollum
-Clock works
Thats all so far
Some Screenies
Hammerfest said:
lack of normal advanced options
Click to expand...
Click to collapse
On devices running Android 4.2, developer options are hidden by default, helping to create a better experience for users. You can reveal the developer options at any time by tapping 7 times on Settings > About phone > Build number on any compatible Android device.
sbradymobile said:
On devices running Android 4.2, developer options are hidden by default, helping to create a better experience for users. You can reveal the developer options at any time by tapping 7 times on Settings > About phone > Build number on any compatible Android device.
Click to expand...
Click to collapse
Thanks...
also, never thought id have a split feeling about something, but as much as i personally hate this change, its... interesting!
changes made, going to play with it for a bit, will update my post again if need arises
EDIT: where can I disable lock screen rotation? lots of changes from 4.1 /~
Awesome!! Thanks to the devs for keeping are tabs alive ! Will test it :good:
about to download CM10.1 now, Ive been patiently waiting for 4.2 for a few weeks now, BIG UP to C.M TEAM & all DEVS that made this possible for our BELOVED P1000. Nuff RESPECT...!!!!!!!
[email protected] said:
about to download CM10.1 now, Ive been patiently waiting for 4.2 for a few weeks now, BIG UP to C.M TEAM & all DEVS that made this possible for our BELOVED P1000. Nuff RESPECT...!!!!!!!
Click to expand...
Click to collapse
I downloaded the rom and gapps about an hour and a half already and must say it responds great and its quick with no lags at all, however i cant figure out where to find the connection to tap when I plug my USB into the computer, usually a notification pops up up top and I would then pull down the notification page but its not being recognized when i connect, and ideas why, i re wiped and flashed cause i had a lil problem with the google page being upside down but that got fixed when I re flashed my device. any help will be appreciated, and thanks again to every involved with the rom for keeping the hope alive...
How can I change landscape to portrait layout?
maihuuquan said:
How can I change landscape to portrait layout?
Click to expand...
Click to collapse
I have not found rotation controls anywhere I looked, only Auto rotate and locked (toggle)... HOWEVER, that doesn't meant they aren't there, it also doesn't mean they are... I didnt know the new trick to get the Developer/Performance options in settings, so I will wait for the official word!
Speaking of rotation, with CM10.1, it seems that the rotation option in many programs flips portrait in the reverse direction! In CM10 (last I used was CM10 nightly 12-2-2012, and its a default setting I change upon each fresh wipe), when I set my launcher to portrait only, it was fine and the portrait direction was level to where my home/back/search/menu buttons where on the right, which is right as it should be (har har?), now when I set the option for Portrait mode in my launcher its flipped upside down with my controls on the left hand side (might be good for the lefty's)!
Ill add that to my earlier post as well, but Ill do it in the morning when I lookup what the orientation degrees are so as not to make an even further fool out of myself!
okay, so anyone know how to open recent apps? because i tried to press home button, but it doesn't show anything expect my tab keep buzzing.
thanks!
Some applications turn bottoms up after starting.
Great great job!!!!
I'm now downloading it. You guys really ROCK! You are keeping P1000 so alive.
---------- Post added at 03:49 PM ---------- Previous post was at 02:56 PM ----------
So thankful to CDESAI. However, hopefully in the next build or so we can now enable soft buttons navbar.
Nice ROM!!
Cdesai,
The ROM is excellent for a experimental release..
There are just small adjust to do...
List of Bugs:
- Bluetooth, as you informed before.
- Panorama photo show revert (mirror) image.
- I didn't found the Recent apps buttons option.
- Rotation option in many programs flips portrait in the reverse direction (as informed for @Hammerfest)
- Here doesn't mount USB automatic (i use a app and its works, normally)
- I cannot set a grid apps correctly.
All the rest works fine!!
It is very smooth..
Congratulations for all devs.:good:
any one can give me screenshot please...?
:fingers-crossed::fingers-crossed:
rheen said:
any one can give me screenshot please...?
:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Screenshot for this build? I think nothing visually change. Mostly are the same. Except the status bar pull down and the toogles.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://forum.xda-developers.com/showthread.php?t=641021
Code:
* Touchscreen:
* Vibration:
* Capacitive Buttons and Navigation wheel
* Radio
* GPRS
* Microphone works
* Charging
* Market
* Sound
* Gsensor:
* ramzswap
* Android system wide Mic support. Eg: Voice dialer works. Note: You must make a phone call first or play sound before it works for programs. (phhusson)
* Wifi
* Did I forget something ? Flashplayer 10.1 of course !! it works but not smooth enough to watch movies !
* Bluetooth : turn ON/OFF pairs and A2DP works!
Code:
* Sense Widgets are a bit big, though nothing you can't live with.
* Camera/videorecord
* GPS
http://www.sendspace.com/file/qmkfbq
http://www.sendspace.com/file/40t0rr
http://xda.duttonbiz.com/package_hero_rosie_07042010/system0704.sqsh 07.04.10
RAPH800 package, Contains zImage, Rootfs and Modules.
http://66.49.195.61/xda/Raph800.zip
http://glemsom.anapnea.net/android/htc-msm-android/
http://xdandroid.southcape.org/rootfs/
Code:
Backup your previous android files if you have any.
Unzip the archive package sense heroxxxx.rar on the root of your sdcard.
Garb the latest zImage and add it to the root of sdcard.
If you use an other phone (RAPHAEL/TOPAZ/RHODIUM) change the startup.txt with one already working on eclair
Run Haret
First boot takes about 10 min to boot so be patient
the OS will be smooth after that
Enjoy
Thx to all developers that did the whole work and give us the chance to use android as a main OS on non supported HTC devices especialy phhusson, enatefox, dzo, zenulator, Chamonix, Stinebd, Makkonen, MrPippy, cr2, Markinus, Babijoe and anyone else who contribute to get this so far
Thx to chkms, davidebeatrice, elroy944, kstephens98, Reefermattness, DracoLX for helping Klinux correct bugs.
This is from XDA and for XDA so fell free to mod it, or ask for help.
As I'm not a developer I did what I could to have a daily usable OS, so be indulgent
Cheers
Screenshots!
Video of it running on a Touch Pro. Thanks to fastrat350! http://www.youtube.com/v/C3kBzSMkX5Y&hl=en_US&fs=1&
Screens: Thanks DanBergundy!
Changelog!
05.03.10 changelog:
- as many of you was confused to what file to use under which folder,
I packed all the neccessary files on one archive see link above
- WIFI supported now
- boot sound removed (I reboot so much so it get me realy ignoyed )
- some mod on system files to support BT in the future
- disable HW3D as the new zImages causes problem booting the system on blackstone
08.03.10 changelog:
-added package with rosie (HTC Sense)
-moded the boot animation
-updated rootfs this should correct other devices keymaps
-added files to support bluetooth on future releases
09.03.10 changelog:
-moded the boot animation it's centered now
-added files to enable bluetooth
-rosie package will be updated later
15.03.10 changelog:
- phhusson corrected the bug with rhod it was a conflict with wifi I added two rootfs one is latest git (rootfs.img) and the second is rootfs with calibration.
- system is more ripped.
- rosie package from htc eris thx to ACL for the link it seems faster than mine, I test it apart some rosie reboots and market everything is fine I will decide which one I will use by default after your feedback
- I added a new file named custom.tar.gz; this file contains the first boot optimization of time so if u can compare how many time it take with and without it will be cool (if u use it with existant data.img it will erase your customizations so be aware )
- don't use custom.tar.gz with rosie package the system will not boot !
-added some apps from xandroid package thx to babijoee
16.03.10 changelog:
- added sms fix from rootfs git all credits to phhusson
- added some mods to fix wifi problem on rootfs git (diam/raph/blac/topaz) rhod owners should wait
I uploded two rootfs: rootfs3Denabled and rootfs3Ddiasbled
- use 3Denabled on diam/raph
- use 3Ddisabled on blackstone
- on tapaz/rhod u can try both and give feedback, cause I don't know if 3D is supported or no
19.03.10 changelog:
- merged rootfs with all fixes
- add auto 3D enable/disable by device
- 3G should be fine for all providers
20.03.10 changelog:
- rootfs for all devices rootfs.img 3D desactivated roll back to the newer ril=phone driver
- rootfs_3G_pbs for those who have problem with their provider (VODAPHONE) with old ril
21.03.10 changelog:
- 1st try to fix britghness
28.03.10 changelog:
- fix for britghness
- new system.sqsh from HERO thread it's more stable and as responsive as on my HERO, I test it during 7h no force close at all !! thx to nprussell for this jewel !!
- market fixed
- google sync fixed
- 2G / 3G switch works thx to phh it force close the phone but works after
- teeter works partialy give it a try it's slugish but as responsive as winmo's one
- 3D gallery works partially but slow
- hexagon home tabs works by tape power button on the main home tab but undersized
29.03.10 changelog:
- 1st htc sense package with sized htc apps thx to [ACL] for the hint to use htc desire apk and thx to paul for the htc desire rom
- it's an alpha version so your feedback will help to fix it
30.03.10 changelog:
- fix for setting
30.03.10 changelog:
- fix of all htc apps FC
- settings could not accessed now
04.04.10 changelog:
- fix of settings Force close
05.04.10 changelog:
- fix of 3G connexion
07.04.10 changelog:
- fix of 3G connexion
- fix of market issue
- fix of loop on boot screen
-wifi still don't work for me test please and post feedback
i dont see any point on copying another thread
I have the espresso build linked on my thread and reading so far its exactly the same as the original
Just dont want to waste xda precious bandwidth and space
But if this is then made to focus on raph/diam then awesome
It's a thread for VGA devices, since the Sense and so on doesn't work on 240DPI by some unknown reason, so this is a 240DPI support thread
I'd rather just read the original thread and get all the updates and comments straight from the source.
However, discussing raph/diam issues without poluting the original thread has its uses
With the latest setup I do not have WIFI/keyboard backlight. Anyone else have them working/not working?
It's working for me
Though I have a RAPH100..
But changing the backlight should work, It's in "Settings->Sound And Display->Screen brightness/backlight" then uncheck auto adjust backlight
hmm, the keyboard is only quarter of screen on my touchpro? is there any answer for this?
Yea.. This is the problem I'm mentioning with the Sense UI..
Though there should be a better keyboard in the AndroidApps folder
Really like this build, but still have some issues:
1. Backlight keeps dimming, even after disabling Auto in settings.
2. Unable to use market place or sync with Google Contacts.
3. Some screens do not layout correctly (night clock/clock/ and on screen keyboard)
4. On screen keyboard apears sluggish at times, but physical keyboard works good
Thanx for the feedback!
That Market and Google contacts issue is beeing worked on
And that not layout correctly is because the HTC apps and Widgets are lower resolution (We're looking for a solution on getting the High resolution apps working )
TheDeadCpu said:
Thanx for the feedback!
That Market and Google contacts issue is beeing worked on
And that not layout correctly is because the HTC apps and Widgets are lower resolution (We're looking for a solution on getting the High resolution apps working )
Click to expand...
Click to collapse
Thanks for the update. You guys are doing great work.
exchange feature set was increased from eclair.. i like! i also concur the issues with the lowres..
seems there is a latency issue from boot to working data connection. i think i waited about 5 minutes before it was able to establish one. this existed on eclair as well.
on a side note i need to get myself a raphael for dev, and then dig in to getting the kernel to work with all features supported.. been a while since i have done some kernel development, but definitely worth the cause.
anyone know where to get a cheap gsm raphael?
I can't access the settings.
every times I want to change the setting, it always tells me error and to force close android setting.
is it know issue?
AFAIK HTC Tatoo have 2.8 VGA screen so i think we need to use some senseui files from tatoo
TheDeadCpu said:
It's working for me
Though I have a RAPH100..
But changing the backlight should work, It's in "Settings->Sound And Display->Screen brightness/backlight" then uncheck auto adjust backlight
Click to expand...
Click to collapse
Not talking about screen light, slide out keyboard light.
can we change the panel resolution to lower so things fit until it is fixed?
Santehnik said:
AFAIK HTC Tatoo have 2.8 VGA screen so i think we need to use some senseui files from tatoo
Click to expand...
Click to collapse
http://www.htc.com/www/product/tattoo/specification.html
2.8-inch TFT-LCD touch-sensitive screen with 240x320 QVGA resolution
Too bad
Santehnik said:
AFAIK HTC Tatoo have 2.8 VGA screen so i think we need to use some senseui files from tatoo
Click to expand...
Click to collapse
Well, we have tried to use the widgets from the Desire, but that makes Android unbootable
ParanoidAndroid for AOSP 4.2.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Work in Progress
Please make sure you have backups for anything you don't want to lose.
Caution is advised. No promises this will not eat your device and take over your home.
Google apps are not official, this is a community hack, we have tested all apps but you could still encounter issues.
This is a preview of what is to come. we are working hard to tame 4.2, which brought significant changes and bugs.
Do not ask about CyanogenMod features. We will add more features as we develop version 3.x, and we have a 100% stable base.
If you have an issue please make sure it is repeatable, capture logcat/dmesg, etc and post to pastebin or similar.
Installation
Update your recovery to the latest version. Pre 4.2 recoveries can mess up your sd card/storage. We recommend TWRP.
Download pa google apps: http://d-h.st/Do8 Updated 15-JUL-2013
Download rom: http://d-h.st/7GF Updated 19-JUL-2013
Follow PA on Google+ for changes and other info
Perform a factory reset in recovery, unless you are already on PA 2.99+
Flash ROM first, then gapps
Wipe dalvik & cache
Reboot and wait, first bootup can take a little time
Enter your Google account info, press home when you encounter the black screen
Please do not restore system apps, system data and Google apps. This can cause bootloops and other problems due to mismatches coming from CM to AOSP and moving from Android version 4.1.2 to 4.2
Features
Hybrid engine ported, Per App DPI and Per App Layout
Tablet UI back from the dead
Per app color
Quicksettings -> Quicktoggles (first draft, more to follow)
New recents implementation
We fixed the aosp lag in the recents view, well, most of it
New SystemUI Icons that can cope with transparent bars, thanks go to John Xionidis
See through Lockscreen is back
Transparent bars + Launcher2 modified to cope with it
4.2 Walls and Sounds
Google stock apps
Extended Desktop
PER-APP-DPI/LAYOUT
This is not tablet mode! Hybrid engine allows you to target apps individually. You get to pick their actual layouts which can tranform content drastically. Keep in mind, this has nothing to do with build.prop hacks or DPI changes. We list all layouts an app brings, you choose one, its as easy as that. It does not matter if your device runs itself in Phone-, Phablet or Tablet-UI, your apps will always look as you like. On top of that you can scale apps, to fit your screen, that way you can even bring full fledged tablet apps and make them run perfectly. Nothing will break, nothing will shrink, your market will be fine. Additionally we have rewritten many parts of the android framework and fixed countless of AOSP bugs to make way for these modifications - our "tablet mode" runs better on a phone than on a real tablet, that is guaranteed.
PER-APP-COLOR
ParanoidAndroid's newest invention. Define apps in your regular hybrid panel. See your phone fade into the color definition of your current app, press home or go elsewhere and it fades back. Create as many combinations you like, you can even dabble with opacity. This feature is made possible by our hybrid engine, which is unique to this rom.
Donations to jaybob413, to D4rKn3sSyS, to molesarecoming, to aaronpoweruser
Click to expand...
Click to collapse
Hints
Our webpage: http://www.paranoid-rom.com/
PA Google+ (Changes, Updates) https://plus.google.com/107979589566958860409/posts
Complete guide to ParanoidPreferences: http://forum.xda-developers.com/showthread.php?t=1927208
Get PA synced to your dropbox folder automatically, apply here (Mention version): http://forum.xda-developers.com/showthread.php?t=1820276
Themes and other goodies you can find here: http://forum.xda-developers.com/showthread.php?t=1646034
ParanoidAndroid Sources found on github here
kernel source
Click to expand...
Click to collapse
Reserved 1
Reserved 2
I don't have time to help tonight, but I would love to test for you tomorrow.
Nice, will test this in a few and will report back.
Flashed w/ twrp booted fine..will report ..HUGE tks!!! :thumbup:
Sent from my NeXuS 10
Smooth as butter will report back with any bugs' but as of now amazing.. Thanks!
Update: keyboard gets cut off on almost every setting, and there is a line on top op every screen.
Tomorrow I will give it a whirl. I am currently running PA on my GS2 (Epic 4G Touch) so I'm familiar with your teams work
Downloading now, will report back with results and bugs.
*edit
-TabletUI (small and medium) is not working for me.
-Changing DPI through interface and then choosing default theme through Launch doesn't change the DPI to what it's supposed to be (listed in different workspace modes)
custom DPI (what you choose through the slider) remains to what you set it even after applying and rebooting a default launch workspace (phablet, tabletui, tabletuiMedium) N10
-Can't change size of font/dpi in System UI so everything is extremely tiny
-Changing workspace made my dock move to the right hand side of the screen (Using Nova Launcher Prime) and changing workspace back doesn't bring it back so dock is now permanently moved to the right side and can't get it back to the bottom.
That's about all I can report back for now. Going back to stock ROM for now.
Ill be downloading this in the morning
Drop downs are miniscule. Can't fix it in settings either.
Sent from my Nexus 10 using Tapatalk 2
Giving to give this a try now. I have PA on my Nexus 7 and Galaxy Nexus so nice to see it for the N10.
Sounds like i still need to do a little work on the configuration for the N10, due to some of the sizing issues being reported.
I will try and get an update out tomorrow with better values. Sorry for the inconvenience, it's a bit of a challenge without having the device.
In the meantime, you can try swapping out the configuration file attached below.
Extract the files from preferences.zip into /system/etc/paranoid/preferences/
Extract the files from config.zip into /system/etc/paranoid/
This should provide more reasonable settings based on the N10 300dpi screen.
great stuff here. I'll definitely be stalking this thread for awhile.
jaybob413 said:
Sounds like i still need to do a little work on the configuration for the N10, due to some of the sizing issues being reported.
I will try and get an update out tomorrow with better values. Sorry for the inconvenience, it's a bit of a challenge without having the device.
In the meantime, you can try swapping out the configuration file attached below.
Extract the files from preferences.zip into /system/etc/paranoid/preferences/
Extract the files from config.zip into /system/etc/paranoid/
This should provide more reasonable settings based on the N10 300dpi screen.
Click to expand...
Click to collapse
Will try this as soon as I get home and give another update.
jaybob413 said:
Sounds like i still need to do a little work on the configuration for the N10, due to some of the sizing issues being reported.
I will try and get an update out tomorrow with better values. Sorry for the inconvenience, it's a bit of a challenge without having the device.
In the meantime, you can try swapping out the configuration file attached below.
Extract the files from preferences.zip into /system/etc/paranoid/preferences/
Extract the files from config.zip into /system/etc/paranoid/
This should provide more reasonable settings based on the N10 300dpi screen.
Click to expand...
Click to collapse
Did the above and the sizing issue is MUCH better. I have all my apps installed and setup and will be giving it a good test. So far seems satble. I got one random reboot after I downloaded all my applications from the PlayStore but been fine since.
Here is one minor issue I noticed. I was in the notification light settings and adding applications and some of the application sizes are very different. Here is some I'm seeing...
jaybob413 said:
Sounds like i still need to do a little work on the configuration for the N10, due to some of the sizing issues being reported.
I will try and get an update out tomorrow with better values. Sorry for the inconvenience, it's a bit of a challenge without having the device.
In the meantime, you can try swapping out the configuration file attached below.
Extract the files from preferences.zip into /system/etc/paranoid/preferences/
Extract the files from config.zip into /system/etc/paranoid/
This should provide more reasonable settings based on the N10 300dpi screen.
Click to expand...
Click to collapse
That worked.
Sent from my Nexus 10 using Tapatalk 2
Thank god for paranoidandroid! If I had to use "phablet" mode much longer and I think I would have gone nuts!
Thank you for making this available, it is working great so far. I only wish that the app drawer button wasn't in the middle of the screen, but great work so far. Please keep going!
Sent from my Nexus 10 using Tapatalk 2
2.99.2 Update Posted
Link to 2.99.2 Update has been posted to OP.
This includes the screen size configuration mods I posted earlier, along with some additional ParanoidAndroid updates.
[ROM]HellFire™Jelly~for~Samsung Galaxys S3~2.9-release(android 4.4.2 )2/16/14
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome To A Team HellFire Creation this is based of CM11 with loads of tweaks and mods all types of bacon for you. This thread will be for stable and weekly releases.
If you have issues with the weeklies, don't bother mentioning it. We know they have issues. I don't want any complaints of such in here.
Now For the stuff that we all been waiting for
.:Features:.
Code:
[B] *4.4 KitKat Rooted
*Based on the latest CM11.0 source
*incorporated latest Cm11.0 updates
*Build.prop tweaks
*HellFire Catapult Launcher
*HellTweaker Menu
*HellFire Halo [COLOR="Red"]Active[/COLOR]
*Theme Chooser
*Nexus Live wallpaper
*RomTool Box
*Dropbox
*Adobe Flash Player
*Auto Focus Video record
*Zipalign Apks for Smother performance
*Updated APN list
*Colorized settings icons
*Default volume control media
*Custom carrier label(In Work
*HellFire Battery bar(In Works)
*Hellpapers
*HellFire Equilizer
*Hellfire Boot Animation
*List View
[/B]
.:Rom Downloads:
All future releases will also be hosted on clockworkmod under my name and in goo manager under x0xhellx0x or linked here.
Current Release Stable:
HellFire™KitKat 2.9 2/16 Stable
Current Release Weeklies:
HellFire™KitKat 2.9 weekly
Want more butter??? Have Dev options enabled and scroll down to window, transition, & animator scale. Change it to '.5x'
.:HellFire™Gapps:. 4.4.2Current CM11.0 Gapps modded
AS USUAL, ALL RELEASES REQUIRE A CLEAN FLASH
-WIPE WIPE WIPE (this includes both /data & /system)
-install rom
-Install gapps
-fix permissions
-Reboot
Wait ten min
enjoy
if you do not follow the rules it will be buggy
Code:
#include
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
**************************************************
Here is the team
**************************************************Devs: x0xhellx0x, da-pharoah
Thread Maintainer: x0xhellx0x, D2Tmo (SGS3 T-mobile) & Otter (Kindle fire)
Thread Maintainer: da-pharoah, M7Att (HTC One ATT)
Thread Maintainer & Team Constructor: M1batt1, D2Att (SGS3 ATT)
Thread Maintainer: bthorne79, D2Spr (SGS3 Sprint) & P311x (Galaxy Tab 2 7")
Thread Maintainer & web designer: jposton, Mako (Google Nexus 4)
Thread Maintainer: krazie1, D2vzw (SGS3 Verizon)
Team HellFire Gitgub
This is our Rom if you brick your phone its not my fault. You flash this at your own risk
.:Thank yous:.CyanogenMod
Faux123
Ktoonsez
ParanoidAndroid
Ayysir
Any others I've missed please say so and I'll add you, no worries.
If you Enjoyed this buy me a beer or a coffee or a red bull here
XDA:DevDB Information
HellFire™ KitKat, a ROM for the T-Mobile Samsung Galaxy S III
Contributors
x0xhellx0x
ROM OS Version: 4.4.x KitKat
Version Information
Status: Testing
Created 2013-08-31
Last Updated 2014-02-16
Guest I'm the first.I will give this Rom a try and report back later.
i did not know the new dev database would work like this i like it im guessing ill have to close my old thread?
x0xhellx0x said:
i did not know the new dev database would work like this i like it im guessing ill have to close my old thread?
Click to expand...
Click to collapse
Finally...tabs for threads!
Excited to try this. Will check back with any bugs I find.
Thanks for sharing dev.
Edit. So far seems pretty stable for me.
Will keep you posted.
Thank you, good job so far everything is working fine (Т999)
Can we flash this on AT&T S3 after changing the build.prop?
x0xhellx0x said:
i did not know the new dev database would work like this i like it im guessing ill have to close my old thread?
Click to expand...
Click to collapse
You can have multiple threads, that is what is followed mostly in xda.. Slim have 3 threads 4.1.2, 4.2.2 and 4.3.. Sometimes people prefer old version and want to share experience with others..
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Just loaded this on my daily driver... So far have not found any issues... I do love how smooth this is running....
Sent from my SGH-T999 using xda premium
excited to try this thanks
not sure if this issue was answered already, if so im sorry but when trying to play music on a bluetooth speaker it connects but says no media.. can anyone help me with this problem??? Thank you in advance
Phaze01 said:
not sure if this issue was answered already, if so im sorry but when trying to play music on a bluetooth speaker it connects but says no media.. can anyone help me with this problem??? Thank you in advance
Click to expand...
Click to collapse
I had the same problem. I fixed it by.
1 connect as usual enter your 0000 let it try to connect.
[Make sure both options are selected]
2 now go to Bluetooth settings and forget network.
3 turn off Bluetooth receiver.
4 restart receiver.
5 go back to setting and choose the receiver.
Hope this helps.
I did find Bluetooth to skip now and again.
May take a bit to connect on a2dp
Edit.
May have to restart device also...
homerwasa said:
I had the same problem. I fixed it by.
1 connect as usual enter your 0000 let it try to connect.
[Make sure both options are selected]
2 now go to Bluetooth settings and forget network.
3 turn off Bluetooth receiver.
4 restart receiver.
5 go back to setting and choose the receiver.
Hope this helps.
I did find Bluetooth to skip now and again.
May take a bit to connect on a2dp
Edit.
May have to restart device also...
Click to expand...
Click to collapse
still didnt work... have had my beats pill connected before but not now so i guess i will just aux cable it until i can figure it out... but thanks anyways homerwasa for the help...
Phaze01 said:
still didnt work... have had my beats pill connected before but not now so i guess i will just aux cable it until i can figure it out... but thanks anyways homerwasa for the help...
Click to expand...
Click to collapse
Yep. Sucks it didn't work.
Found a couple things myself.
Halo functions for me are buggy.
I'm assuming its paranoid android related.
Not a big fan anyway.
Pie is working
Duel pane works text is cut but not a big deal
For some strange reason my custom theme seems to revert back to system.
4.3 will only get better
As far as the calls' WiFi' and general setting ROM is stable.
Battery life has been around 8 to 10 hrs with moderate use.
Couple questions:
how do you make screenshot?
Also, I fully charged battery before going to sleep and disconnected the charger. After 8.5 hours I got only 76% of charge left. Google services took 65% of all charges, cpu total 15min, keep awake 8.5 hours. So looks like it never went to sleep mode.
Any suggestions?
Sent from my SGH-T999 using xda app-developers app
any hard core candy crushers out there wana test a beta for me and i mean hard core candy crusher someone who can make this beta break i want you to try and make candy crush force close pm me im only accepting one person thank you
Been using this for a few days with no issues! I think this is the best release I've ran so far on this device. I love the 4.3 buttery feel and really like the HellFire Interface settings layout, Thanks! Only thing i would change; The app menu button on the homescreen was replaced with the hellfire logo, but looks low resolution. I use Buzz launcher anyway but thought I would give my personal purely aesthetic opinion. Great work!
Thanks for the great rom! I was just wondering if anyone else experienced a similar problem where it says that my wifi is running the whole day (as noted in my battery settings), even though it's not? I'm not sure if this affects battery life either since my wifi is actually not on...
---------- Post added at 04:56 AM ---------- Previous post was at 04:27 AM ----------
alex_mib said:
Couple questions:
how do you make screenshot?
Also, I fully charged battery before going to sleep and disconnected the charger. After 8.5 hours I got only 76% of charge left. Google services took 65% of all charges, cpu total 15min, keep awake 8.5 hours. So looks like it never went to sleep mode.
Any suggestions?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
In regards to your screenshot inquiry. Press volume down + the power button at the same time and that should do the trick
Wired Headset issue....
When using the factory stock wired headset with the phone the button on the headset that would normally allow me to hang up the phone does not seem to function in a call. I have to resort to opening up the calling screen and hanging up from there...
Has anyone else seen this issue??
will not finish loading
My Phone boots and I get the HellFire with a spinning wheel and it never ends. I waited for 30 mins. Anyone else have this issue?
UPDATE: I was able to get past it.
DO NOT post in this thread until you have read the first three posts and last two pages of this thread in their entirety!
"Me Too" posts for known issues with no useful debugging information WILL BE REPORTED.
This is the thread for Omni nightlies for the Oppo Find 7a and 7s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://dl.omnirom.org/find7/
Also, the nightlies support LVM for partition remapping, which allows the two internal data partitions (/sdcard and /data) to be merged into one that uses emulated storage for /sdcard (Android's standard method for ICS and later). Details can be found at http://forum.xda-developers.com/showpost.php?p=55081626&postcount=546 . LVM is significantly safer than other partition remapping solutions as it does not actually alter the underlying partition table. As a result, switching layouts is MUCH faster than methods which remap the partition table, and switching layouts is more reliable and doesn't fail in strange and difficult-to-repair ways (such as the frequent failures of another solution that can be seen in the ColorOS 2.0.2i beta thread). There's a good chance Oppo will be switching over to this method with a future ColorOS release, especially after their experiences with 2.0.2
For historical reference, I will leave the pre-nightly test builds in the Downloads section of this thread. However, these are now obsolete.
Gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
(this isn't a nexus, use the modular releases, not full)
Omni only supports TWRP recovery, use any alternate recovery at your own risk. Official TWRP for this device is:
http://forum.xda-developers.com/showthread.php?t=2717916
Anyone flashing this should know the usual installation drill... Flash in recovery, flash gapps, wipe data/factory reset. If you don't know how to do these things, this package is not yet ready for users like you.
Thanks go to the following people for their help during bringup:
Jake Whatley and Kristof Petho (Omni)
Max Weninger for polishing the device up and getting it up to nightly readiness after I kind of burned out
Andre Saddler and Hieu Nguyen of the Paranoid Android team
XDA:DevDB Information
Omni for Find 7a/7s, ROM for the Oppo Find 7
Contributors
Entropy512, maxwen, xplodwild, jerdog, jakew02
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Nightly
Created 2014-05-21
Last Updated 2014-09-02
Reserved
Kernel source:
https://github.com/omnirom/android_kernel_oppo_msm8974/ plus the following Gerrit items:
https://gerrit.omnirom.org/#/c/7373/
https://gerrit.omnirom.org/#/c/7374/
https://gerrit.omnirom.org/#/c/7423/
https://gerrit.omnirom.org/#/c/7651/
https://gerrit.omnirom.org/#/c/7649/
https://gerrit.omnirom.org/#/c/7650/
https://gerrit.omnirom.org/#/c/7648/
Device tree:
https://github.com/omnirom/android_device_oppo_find7a/ plus:
https://gerrit.omnirom.org/#/c/7336/
https://gerrit.omnirom.org/#/c/7645/
https://gerrit.omnirom.org/#/c/7434/
Other Gerrit items:
https://gerrit.omnirom.org/#/c/7652/
https://gerrit.omnirom.org/#/c/7460/
https://gerrit.omnirom.org/#/c/7465/
https://gerrit.omnirom.org/#/c/7103/
Also there are misc patches to increase debug logging in a number of places (the basic setting NDEBUG to 0)
Blobs: donkeycoyote
Reserved
Current status as of 05/20/2014:
GPS works
Wifi works
Cellular radio works (data and voice calls)
Basic camera/camcorder functions work
Bluetooth works (tested with Google Glass and an OBDKey)
Sensors work (except for Google Camera Photosphere - see below)
Audio is flaky - Mic does not work in speakerphone calls (earpiece only) and headsets with microphones cause the audio HAL to barf. There are probably a number of other use cases where audio doesn't work well. Confirmed working are Google Play Music, Google Maps, earpiece calls, Bluetooth calls via Google Glass (Mic in speakerphone/headphones may be fixed in the 5/30 build - won't test until tomorrow.)
Not yet implemented (need to get the basics done first, these shouldn't be too hard since maxwen did them all on N1)
Screen-off gestures for music
"Hey, Snapdragon" voice wakeup - gotta talk to xplodwild about this
Superzoom mode (I'm about halfway there, it's in the 5/30 build but crashes when you take a shot, so effectively isn't really there...)
Known issues:
Rare spontaneous reboots due to the WCNSS firmware crashing (1-2 times/week for me)
Magnetometer (compass) gets "Stuck" if you use Google Camera
LPM (charging when device is off) is broken - device may charge but screen gets stuck on at the Oppo logo. (may sometimes happen when rebooting on charger)
Woot!
Here we go!
Sent from my OnePlus 7a
Finally a good vanilla build
My camera lenses produce a clicking noise everytime a camera app is closed. It didn't happen with color OS before. ¿is there any issue with it?
If you want to have a OP more attractive, i know content is attractive but picture too, here it is a simply prez from me...
You can use it freely... or trash it quickly !
Does VOCC Charging works now?
Also, 3-ring headsets do not work (ie like the headset that came in the box).
Great work guys... Running super for an alpha.
There's a typo, it's build in may, not april :good:
lesscro said:
If you want to have a OP more attractive, i know content is attractive but picture too, here it is a simply prez from me...
You can use it freely... or trash it quickly !
Click to expand...
Click to collapse
I'm not a big fan of flashy posts with lots of graphics. Means more data for my browser to load.
hulicow said:
Does VOCC Charging works now?
Click to expand...
Click to collapse
It's in-kernel, it's pretty much impossible to get a device with working charging without VOOC.
kristofpetho said:
Also, 3-ring headsets do not work (ie like the headset that came in the box).
Click to expand...
Click to collapse
That's what I meant by headsets with mics barf. (although headsets with media controls might be in the same boat...)
xabierd said:
There's a typo, it's build in may, not april :good:
Click to expand...
Click to collapse
WHAT? It's not 4/20???
No problem... then trash it as i say...
cheers
It's begun. Glad to see you got it through entropy.
Once the initial hiccups are ironed out this phone can finally take it's place as the stylish and capable smartphone it should have had from the very start.
Gesendet von meinem One mit Tapatalk
Fix for 3-ring jack not working incoming.
Entropy512 said:
Not yet implemented (need to get the basics done first, these shouldn't be too hard since maxwen did them all on N1)
Doubletap to wake
Screen-off gestures
Click to expand...
Click to collapse
Since 7a also use F3 for double tap it should be as easy as adding
<bool name="config_offscreenGestureSupport">true</bool>
to framework overlay
whats also the same is circle -> F4
the rest (F5 - F9) is different to the other oppos - actually we might need to filter them
out at the moment until we add support in the framework for them
maxwen said:
Since 7a also use F3 for double tap it should be as easy as adding
<bool name="config_offscreenGestureSupport">true</bool>
to framework overlay
whats also the same is circle -> F4
the rest (F5 - F9) is different to the other oppos - actually we might need to filter them
out at the moment until we add support in the framework for them
Click to expand...
Click to collapse
Thanks!
BTW, what was the story behind https://github.com/omnirom/android_...mmit/0f6126a18e85e254d15421751abe78939beab1fd - were you getting a bunch of input event spam waking up the device during suspend? That's a problem I'm periodically seeing on this device.
Entropy512 said:
Thanks!
BTW, what was the story behind https://github.com/omnirom/android_...mmit/0f6126a18e85e254d15421751abe78939beab1fd - were you getting a bunch of input event spam waking up the device during suspend? That's a problem I'm periodically seeing on this device.
Click to expand...
Click to collapse
Thats a little help to the "ear opening notification bar on call problem"
on the F5 it can take up to 500ms from screen off because of proxy
sensor until TS suspend is done - this filters out events during that time.
Its kinda hacky and doesnt solve the issue all the time but
better then before and little effort and risk.
We dont have the issue on the N1
maxwen said:
Thats a little help to the "ear opening notification bar on call problem"
on the F5 it can take up to 500ms from screen off because of proxy
sensor until TS suspend is done - this filters out events during that time.
Its kinda hacky and doesnt solve the issue all the time but
better then before and little effort and risk.
We dont have the issue on the N1
Click to expand...
Click to collapse
Wasn't that a different patch?
I'm seeing a problem where the device gets stuck wakelocked processing lots of input event spam from somewhere, or it's not properly flushing the key event queue. It's intermittent - sometimes it's absolutely fine, other times it just goes nuts.
maxwen said:
Thats a little help to the "ear opening notification bar on call problem"
on the F5 it can take up to 500ms from screen off because of proxy
sensor until TS suspend is done - this filters out events during that time.
Its kinda hacky and doesnt solve the issue all the time but
better then before and little effort and risk.
We dont have the issue on the N1
Click to expand...
Click to collapse
ah - no
LOL I was to much ahead and imagined another change you might
also find at some point
This one is actually obsolete AFAIKS since there is a check
for is_tp_suspended on top of the function. Think this is a "leftover"
for our properitary S2W impl that has been obsoleted
TEAM GUMMY NIGHLY's
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*
Team Gummy is proud to introduce the Team Gummy Nightlys.. Here you will find an overview of new options offered in the latest release. While there is more features than we could ever go over in here, we thought you might like a walkthrough some of the most popular
*
*
FEATURES: See our Google Doc Feature overview
*
Dark Gummy
Theme Chooser
Advanced Options
Hardware key rebinding
Navigation bar mods
Pie
Power menu customization
Device specific advanced settings
Blacklist phone call/messaging options
Performance Settings
Wakelock blocker
App ops
Sound Settings
Quiet Hours
Ascending ringtones
Live volume steps
Camera shutter sound controls
Display Settings
LCD Density
Notification Light Controls
Volume Rocker Wake
Status Bar Mods
Clock and Date alignment/customization
Custom battery icon options
Battery bar
Signal style tweaks
Breathing notifications
Notification count
Notification Drawer Mods
Custom carrier label options
Show connected Wifi network name
Clock click actions
Notification drawer custom background and transparency
QuickSettings Mods
Toggles per row
Fast toggle
Favorite contact toggle
Custom toggle
Lockscreen Mods
Active display
Lockscreen notifications
Slider targets and shortcuts
Custom handle options and colors
Lockscreen background customization
Lockscreen widget options
Slider torch
Language and Input Settings
Force Auto Rotate when keyboard is shown
Disable full screen keyboard in landscape mode
Show IME selector in notification area
Enter key instead of emoticon
Volume key cursor controls
*
Issues:
* Known so far!
*
Instructions for installations:
*
1. Download ROM
2. Download Gapps
3. Push to sdcard
4. Reboot Recovery
5. Wipe Data and Cache
6. Install ROM
7. Install Gapps
8. Reboot System
* Source github.com/TEAM-Gummy
* Kernel Source https://github.com/TEAM-Gummy/android_kernel_oppo_find7a
Contributions:
*
* Thank you to Cyanogenmod for device and hardware repositories. Without this, porting Gummy to QCOM devices would have been nearly impossible.
* Thank you to Google for the best source code.
* A HUGE THANK YOU FOR DHACKER FOR TAKING THIS PROJECT ON! HE IS THE MAN!
Link in first post
Is gps issue already solved?
Thanks for the great effort!
What GPS issue
Sent from my One M8 using Tapatalk
I'm going to try this baking.
Which custom recovery to use for flashing?
Sent from my X9006 using xda premium
I use twrp
Sent from my One M8 using Tapatalk
It seems that the only issue so far is the double tap to wake not working.
Ya that's ROM wide and will be fixed
Sent from my One M8 using Tapatalk
Are the updates OTA due to your own recovery being required?
Sent from my X9006 using Tapatalk
Well I guess TWRP would back my system up if my SD card wasn't in NTFS..noob..after I format it back to fa32 and put everything back on it I'll flash this rom and try it out. Thanks guys!
Hard to believe the initial post of no known issues with the first build but if it's true then that's gorgeous.
Well it's gorgeous either way.
Will give this and omni a test run later today.
Can't wait actually... Given the mediocre setup we have been presented with coloros.
Gesendet von meinem One mit Tapatalk
It works pretty well so far! Just played around with it for half an hour.
Two things I noticed: The camera does not go into landscape mode. And the Storage is still divided into two partitions (like ColorOS) Is it possible to unite them into one?
Awesome work so far!
The only issue i noticed in short test time, double tap to wake doenst work as wrote here before, double tap to sleep work
And one important question for me: Does the modem use Band 20 for LTE? I cant test it at that moment.
And it seems to be that fast charging works too. But iam not sure, because i charge at 36%, after 20 min. it was at 42% and 30 min later it was at 96%. There was a big jump in charging in 30 min.
betold said:
It works pretty well so far! Just played around with it for half an hour.
Two things I noticed: The camera does not go into landscape mode. And the Storage is still divided into two partitions (like ColorOS) Is it possible to unite them into one?
Awesome work so far!
Click to expand...
Click to collapse
will reply to this how I did over at oppo forums..
This is the way it is in colorOS as well I believe. We could have asked everyone to re-partition their internal sdcard but that's retarded. for one.. you would lose your pictures etc etc that you have taken using COS..
kejar31 said:
will reply to this how I did over at oppo forums..
This is the way it is in colorOS as well I believe. We could have asked everyone to re-partition their internal sdcard but that's retarded. for one.. you would lose your pictures etc etc that you have taken using COS..
Click to expand...
Click to collapse
You have been on ColorOS haven't you...?
Then you probably know the issues it has...
And now we got source-baked roms...
FOR CHRISTS SAKE DO YOU REALLY THINK ANYONES GOING BACK TO THAT HELLHOLE?! :silly:
But no, seriously. ColorOS is in the past for me one way or another, I gave it a chance, it failed. Hell even the CM11s port does a way better job at handling this device than ColorOS does.
So if I leave the old system behind, why not get the most of the "new" system anyway?
Part of that would be unified partition layout if you ask me.
MrColdbird said:
You have been on ColorOS haven't you...?
Then you probably know the issues it has...
And now we got source-baked roms...
FOR CHRISTS SAKE DO YOU REALLY THINK ANYONES GOING BACK TO THAT HELLHOLE?! :silly:
But no, seriously. ColorOS is in the past for me one way or another, I gave it a chance, it failed. Hell even the CM11s port does a way better job at handling this device than ColorOS does.
So if I leave the old system behind, why not get the most of the "new" system anyway?
Part of that would be unified partition layout if you ask me.
Click to expand...
Click to collapse
This is the way it is and will be for compatibility... I guarantee that all respectable AOSP ROM's will do the same.. In the meantime I am sure someone will release an aftermarket hack for people who want this..
kejar31 said:
This is the way it is and will be for comparability... I guarantee that all respectable AOSP ROM's will do the same.. In the meantime I am sure someone will release an aftermarket hack for people who want this..
Click to expand...
Click to collapse
I see no reason why it can't be done as a optional x-plattform feature.
LVM2 works via loopfiles just as much as it does via physical devices, make your script format /data and /internal_sd if you want and place 2 LVM loopfiles into both folders, taking up the device space there.
Then on bootup simply check whether the loopfiles exist or not, if they do bring up the volumegroup and mount the unified storage, if not go with the convential setup.
MrColdbird said:
I see no reason why it can't be done as a optional x-plattform feature.
LVM2 works via loopfiles just as much as it does via physical devices, make your script format /data and /internal_sd if you want and place 2 LVM loopfiles into both folders, taking up the device space there.
Then on bootup simply check whether the loopfiles exist or not, if they do bring up the volumegroup and mount the unified storage, if not go with the convential setup.
Click to expand...
Click to collapse
https://github.com/TEAM-Gummy
there is the source.. start with that, make it yourself
kejar31 said:
https://github.com/TEAM-Gummy
there is the source.. start with that, make it yourself
Click to expand...
Click to collapse
I might just do that when I find the time to invest into it. :fingers-crossed: