[Q]One X cid 11 not updating - HTC One X

HTC One X cid e11 Holland.
First got the small update, installed fine.. now jb, it doesn't work it shows the install progress with the robot and then it stops goes into clockwork and says something about the SD and reboots itself?
Unlocked, rooted and google now for ics
Anyone has the stock recovery?
Here's a pic , maybe this helps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Send from my HTC One X using TapTalk

Install the stock recovery. Then retry installing the ota update.

Do you have a link for me, please? And how to install it?
Send from my HTC One X using TapTalk

What is your stock base version ? (you can extract it from your RUU's, rom.zip)
and you install it from fastboot : fastboot flash recovery C:/....recovery.img

Vcek said:
What is your stock base version ? (you can extract it from your RUU's, rom.zip)
and you install it from fastboot : fastboot flash recovery C:/....recovery.img
Click to expand...
Click to collapse
Thanks for your help, to be honest I have no idea how to do that, I just installed the little update before jellybean, that went fine.. I don't know how to ?
Send from my HTC One X using TapTalk

ok, download this zip and extract it,
hold volume down and powerbutton until in bootloader
select fastboot with power button
connect usb
open the check_versions.bat file in the extracted folder
tell me what the check_versions told you

Vcek said:
ok, download this zip and extract it,
hold volume down and powerbutton until in bootloader
select fastboot with power button
connect usb
open the check_versions.bat file in the extracted folder
tell me what the check_versions told you
Click to expand...
Click to collapse
I hope this is correctly done :

Yes, hold on.
EDIT:
Download these 4 files: 1 2 3 4, and put them in the same Vtools folder.
get back to fastboot mode
run stock_recovery.bat
Try to install the OTA.
If it worked, restore CWM with cwm.bat
if it didn't work, also restore cwm until you find the stock recovery for your phone.

JB update needs a pure stock ROM with all stock apps and files intact.
It is best to revert to stock then only update to JB.
You need 2.17.401.2 RUU to revert.

ckpv5 said:
JB update needs a pure stock ROM with all stock apps and files intact.
It is best to revert to stock then only update to JB.
You need 2.17.401.2 RUU to revert.
Click to expand...
Click to collapse
So that I have google now for ICS I can't update whatever I try?
Doubt that

Vcek said:
Yes, hold on.
EDIT:
Download these 4 files: 1 2 3 4, and put them in the same Vtools folder.
get back to fastboot mode
run stock_recovery.bat
Try to install the OTA.
If it worked, restore CWM with cwm.bat
if it didn't work, also restore cwm until you find the stock recovery for your phone.
Click to expand...
Click to collapse
Thank you, doing it now

siemz said:
So that I have google now for ICS I can't update whatever I try?
Doubt that
Click to expand...
Click to collapse
The OTA will look for the original Google Search apk to patch, if it can't find it, the OTA will fails. Same for other apks.
Anyway, you can try the OTA update first and see how it goes. If it fails, your only option is RUU to revert to stock.

ckpv5 said:
The OTA will look for the original Google Search apk to patch, if it can't find it, the OTA will fails. Same for other apks.
Anyway, you can try the OTA update first and see how it goes. If it fails, your only option is RUU to revert to stock.
Click to expand...
Click to collapse
it indeed shows a red error sign now next to the phone
And can't I just restore an original copy of the google APK?
or delete it ?
And where could I find one?
The red error sign is right above when it's half done installing then stops, rebooted my phone now

siemz said:
it indeed shows a red error sign now next to the phone
And can't I just restore an original copy of the google APK?
or delete it ?
Click to expand...
Click to collapse
You need to restore the original apk, not delete it... same thing for other apks that you may have already removed or disabled (you need to re-enable them).
Also root must be removed, but not too sure whether OTA updating will be successful with an unlocked bootloader as this is a major update.
As I said earlier, it is best to revert to stock first with a RUU for a hassle free JB update, but you lose all the settings and customization.

ckpv5 said:
You need to restore the original apk, not delete it... same thing for other apks that you may have already removed or disabled (you need to re-enable them).
Also root must be removed, but not too sure whether OTA updating will be successful with an unlocked bootloader as this is a major update.
As I said earlier, it is best to revert to stock first with a RUU for a hassle free JB update, but you lose all the settings and customization.
Click to expand...
Click to collapse
Where could I find the original google search APK? That's the only thing I really used when was rooted,
And I heard bout successful updates when unlocked + Rooted
please, anyone provide the official google search apk

siemz said:
Where could I find the original google search APK? That's the only thing I really used when was rooted,
And I heard bout successful updates when unlocked + Rooted
please, anyone provide the official google search apk
Click to expand...
Click to collapse
Here are the GoogleQuickSearchBox.apk and GoogleQuickSearchBox.odex from 2.17.401.2

Thanks!
trying it now

ckpv5 said:
Here are the GoogleQuickSearchBox.apk and GoogleQuickSearchBox.odex from 2.17.401.2
Click to expand...
Click to collapse
What is the odex for
moved both into /system/app rebooting now then trying to update

siemz said:
What is the odex for
Click to expand...
Click to collapse
I just put there in case you removed the odex file too. If it is still there, then it is ok. Hmm... stock ROM comprise of apk + odex files.

ckpv5 said:
I just put there in case you removed the odex file too. If it is still there, then it is ok. Hmm... stock ROM comprise of apk + odex files.
Click to expand...
Click to collapse
Update is redownloading now, thanks for your help
Hope this works :angel:

Related

[URL]Official OTA 4.0.4 GSM Only (How to manually update it)

Official OTA 4.0.4 GSM Only (from 4.0.2)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update from ICL53F (4.0.2) to IMM76D (4.0.4)
http://android.clients.google.com/p....signed-yakju-IMM76D-from-ICL53F.7f97fbc1.zip (37.4 MiB)
How to update !!Works fine!!
The prerequisites:
You need a GSM Galaxy Nexus with the product codename 'yakju'. NOT the Verizon Galaxy Nexus, or 'yakjuxw', or 'yakjusc' or any of the other variants we've heard about. Check your product name before you begin using this app.
You need to be running stock Android 4.0.2 (ICL53F) rather than any custom ROM.
You need the Android SDK installed. Note the path.
You need fastboot. (Windows or Mac)
You need to unlock your bootloader. If you haven't done that (and you really should), here's how. (Note that if you haven't already completed this step, unlocking your bootloader will wipe all data on your phone.)
Download the Android 4.0.2 to 4.0.4 update from Google here.
Download the latest ClockWorkmod recovery image from here.
Now, the instructions:
Copy the OTA package above to the /sdcard folder on your Galaxy Nexus
Drop the ClockworkMod file in the same folder you have fastboot in on your computer in the SDK folder (either /tools or /platform-tools). Rename it to cwm.img to make things easy.
Reboot your Galaxy Nexus to bootloader mode (hold volume-up and volume-down, then press power).
Plug your phone into your computer, and open a command prompt or terminal. Navigate to the folder with fastboot and the cwm.img inside it.
At the command line, type the following: fastboot-windows.exe boot cwm.img (or just fastboot.exe if that's what you've got)
Use the ClockWorkMod recovery menu to flash a zip file from the SD card, and choose the OTA zip file you downloaded earlier.
Let things run their course.
Source
from that, i can install android 4.0.4 in my italian yakju gsm nexus? *____*
Abufinzio said:
from that, i can install android 4.0.4 in my italian yakju gsm nexus? *____*
Click to expand...
Click to collapse
If you have root and/or clockwork mod recovery.
Sent from my Galaxy Nexus using XDA
there is a way to have the 4.0.4 with a stock nexus? :v
Abufinzio said:
there is a way to have the 4.0.4 with a stock nexus? :v
Click to expand...
Click to collapse
Wait for OTA.
awwwwww ok
I'm on stock rom. How do I install this?
Thanks in advance.
marcomsousa said:
Oficial OTA 4.0.4 URL GSM ONLY
yakju-IMM76D-from-ICL53F
http://android.clients.google.com/p....signed-yakju-IMM76D-from-ICL53F.7f97fbc1.zip
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
yakju...unlocked..rooted..stock rom...cwm recovery...
so, drop it in sdcard, reboot in recovery, install zip from sd card, flash the zip, then flash su.zip, then restart....right?
Nikos_s3 said:
yakju...unlocked..rooted..stock rom...cwm recovery...
so, drop it in sdcard, reboot in recovery, install zip from sd card, flash the zip, then flash su.zip, then restart....right?
Click to expand...
Click to collapse
Yes, but for those not on CWM:
OTA has to go into /cache if on stock recovery.
Do I need to be rooted to install this?
bryant_16 said:
Do I need to be rooted to install this?
Click to expand...
Click to collapse
Rooted or a custom recovery.
new radio?
I just got it from android central and now see the thread up here.....
adrynalyne said:
Rooted or a custom recovery.
Click to expand...
Click to collapse
How do I do a custom recovery?
I'm on stock 4.0.2.
Can i just apply this?
Tks
the ota is FROM 4.0.2
there is no 4.0.3 update
wisefreakz said:
I'm on stock 4.0.2.
Can i just apply this?
Tks
Click to expand...
Click to collapse
you need a custom recovery to apply this, use this http://forum.xda-developers.com/showthread.php?t=1392310 to install CWM
andQlimax said:
the ota is FROM 4.0.2
there is no 4.0.3 update
Click to expand...
Click to collapse
So thread title is wrong!!
ICL53F is GSM 4.0.2 not 4.0.3 right? please change your Topic title!
I have a locked bootloader but root with the xploit trick.
can I move this Zip to /cache and isntall?
i Have ICL53F 4.0.2
adrynalyne said:
Rooted or a custom recovery.
Click to expand...
Click to collapse
Back when I had my N1 I could copy the zip to update.zip, put it on the sd card, boot into recovery and apply it. Everything stock and no root. So that's not the case anymore? If not, why not?
I'd like to keep it as stock as possible. I could do that with the N1 and still not have to wait for the OTA.

Please help me to update for Jelly Bean

Hi guys:
I am new for HTC , i was updating the Sony phones using Flashtool program by downloading ftf rom file.
With Samsung i was downloading stock roms and flash it using Odin.
On the HTC where to download stock roms? and what is the last roms name have to be? (Like ftf in sony roms)​
The $niper said:
Hi guys:
I am new for HTC , i was updating the Sony phones using Flashtool program by downloading ftf rom file.
With Samsung i was downloading stock roms and flash it using Odin.
On the HTC where to download stock roms? and what is the last roms name have to be? (Like ftf in sony roms)​
Click to expand...
Click to collapse
you need first to update your HBOOT according to your CID and then you can install whatever rom you want look in the development section, there you can find everything you need
matt95 said:
you need first to update your HBOOT according to your CID and then you can install whatever rom you want look in the development section, there you can find everything you need
Click to expand...
Click to collapse
Lol i didn't understand any thing!!
Am i have to update that what called HBOOT to flash a stock roms? Where can i find stock roms files with the lastest JB update and with All languages?​
The $niper said:
Lol i didn't understand any thing!!
Am i have to update that what called HBOOT to flash a stock roms? Where can i find stock roms files with the lastest JB update and with All languages?​
Click to expand...
Click to collapse
Check your bootloader.
Go to bootloader by holding power+volume down button continuosly until you can see some info about your device.
Sent from Viperized HTC One X using XDA Premium.
The $niper said:
Lol i didn't understand any thing!!​
Click to expand...
Click to collapse
OK. I think you need to read up a little on how things work with the HTC One X. It's really good that you have experience with Odin, but with the HTC One X there are a few complicated issues that people have worked hard to get around.
I would direct you to look at the following guide. it's very well written and easy to follow. With your previous experience I'm sure you'll be enjoying stock or custom roms soon.
http://forum.xda-developers.com/showthread.php?t=2069904
For a more detailed explanation look at this
http://www.flow-wolf.net/2012/10/htc-one-x-perfect-guide-for-beginners.html
For a list of available ROMS, tools, and modifications, check the last link in my signature block
requiem11 said:
OK. I think you need to read up a little on how things work with the HTC One X. It's really good that you have experience with Odin, but with the HTC One X there are a few complicated issues that people have worked hard to get around.
I would direct you to look at the following guide. it's very well written and easy to follow. With your previous experience I'm sure you'll be enjoying stock or custom roms soon.
http://forum.xda-developers.com/showthread.php?t=2069904
For a more detailed explanation look at this
http://www.flow-wolf.net/2012/10/htc-one-x-perfect-guide-for-beginners.html
For a list of available ROMS, tools, and modifications, check the last link in my signature block
Click to expand...
Click to collapse
Thanks for that , i red some of it , and i understanded some and i didn't understanded the others.
Im i have to update the Hboot to flash new stock roms or downgrade stock rome,root,recoverys?
For now i didn't understand how to flash stock roms.
Where can i download the stock roms by lastest versions? Can i flash it by Odin?​
The $niper said:
Thanks for that , i red some of it , and i understanded some and i didn't understanded the others.
Im i have to update the Hboot to flash new stock roms or downgrade stock rome,root,recoverys?
For now i didn't understand how to flash stock roms.
Where can i download the stock roms by lastest versions? Can i flash it by Odin?​
Click to expand...
Click to collapse
NO, you can't flash using ODIN. That app only for samsung afaik.
If you want help, 1st you need to provide us with your device info.
Are you on a custom rom now and do you know how the recovery and fastboot commands work ?
DevilRedJack said:
NO, you can't flash using ODIN. That app only for samsung afaik.
If you want help, 1st you need to provide us with your device info.
Are you on a custom rom now and do you know how the recovery and fastboot commands work ?
Click to expand...
Click to collapse
I think the phone have a stock ICS rom , i just know hot to open fastboot mode and recovery , nothing else ​
And are there any famous program for HTC that can flash stock roms easy like Odin?​
The $niper said:
And are there any famous program for HTC that can flash stock roms easy like Odin?​
Click to expand...
Click to collapse
What recovery do you have?
Edit: AFAIK, there is no app that can flash like Odin for hox. This because of HTC S-ON.
And please tell me your android version. Go to Setting>About>Software Information.
DevilRedJack said:
What recovery do you have?
Edit: AFAIK, there is no app that can flash like Odin for hox. This because of HTC S-ON.
And please tell me your android version. Go to Setting>About>Software Information.
Click to expand...
Click to collapse
IDK what is the recovery , but i open it by Bootloader mode then choosing recovery , it show the name "ClockWorkMod v5------" sorry i forgot all name.
Android version is ICS 4.0.4.
So if i want to update to the official Jelly Bean , i have to download it a rootable zip then flash it by recovery?
Is there any need to update the HBoot?​
The $niper said:
IDK what is the recovery , but i open it by Bootloader mode then choosing recovery , it show the name "ClockWorkMod v5------" sorry i forgot all name.
Android version is ICS 4.0.4.
So if i want to update to the official Jelly Bean , i have to download it a rootable zip then flash it by recovery?
Is there any need to update the HBoot?​
Click to expand...
Click to collapse
Go to your FASTBOOT and flash THIS
Then run this command, fastboot getvar all
Please tell what you have.
Edit: Get to fastboot by choosing FASTBOOT in bootloader. Then connect your hox to pc using usb cable.
Then extract This in your pc and run CMD from that folder.
If you see the recovery as clockworkmod recovery, then you have to revert to stock recovery so that you can do ota updates on your phone. If you have stock rom at present, then flash your recovery to stock recovery. Ota updates work only when you are on stock rom and stock recovery.
Sent from my HTC One X using xda app-developers app
DevilRedJack said:
Go to your FASTBOOT and flash THIS
Then run this command, fastboot getvar all
Please tell what you have.
Edit: Get to fastboot by choosing FASTBOOT in bootloader. Then connect your hox to pc using usb cable.
Then extract This in your pc and run CMD from that folder.
Click to expand...
Click to collapse
Thanks for help , i will try to flash this zip by ClockWorkMod , then type that command and i will give you screenshot about what i got.​
sekhar546 said:
If you see the recovery as clockworkmod recovery, then you have to revert to stock recovery so that you can do ota updates on your phone. If you have stock rom at present, then flash your recovery to stock recovery. Ota updates work only when you are on stock rom and stock recovery.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Aha , so OTA updates are stock update files? Is it flashable by stock recovery?
How to get back the stock recovery?​
Upppppp
Help me guys , i didn't understand any thing , i want to know how to download stock roms files and how to flash it to my phone.
EX: I want to download 2 stock offesial roms , Jelly Bean and ICS , and i want to know how to flash every one of them.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

			
				
Download this ruu
http://androidfiles.org/ruu/securek...Radio_1.1204.105.14_release_260491_signed.exe
Put the phone in the bootloader/fastboot usb mode and lock the bootloader
Fastboot oem lock
Then execute the ruu WITH admin rights (right click it)
Reboot and start updating to android 4.0.4 and then to android 4.1 JB. Just follow all updates !
Mr Hofs said:
Download this ruu
http://androidfiles.org/ruu/securek...Radio_1.1204.105.14_release_260491_signed.exe
Put the phone in the bootloader/fastboot usb mode and lock the bootloader
Fastboot oem lock
Then execute the ruu WITH admin rights (right click it)
Reboot and start updating to android 4.0.4 and then to android 4.1 JB. Just follow all updates !
Click to expand...
Click to collapse
You mean to connect my phone then type "Fastboot oem lock" in the CMD to lock the bootloader? I know that if we want to unlock the bootloader so we have to be on stock rom with stock kernel , what will happen if i wan't on stock?
If i clicked on RUU file what will happen? will it install a rom into my phone? WHat is the number of it?​
The ruu will flash the phone back to 100% stock android 4.0.3 after that you can start updating the phone to android 4.0.4 and then to 4.1 JB. Backup everything including the sdcard to be sure.
So if you flash the ruu you get stock Rom,kernel,recovery
After you are done updating to JB you can unlock the bootloader and flash a ustom recovery back and start using custom JB roms again
Mr Hofs said:
The ruu will flash the phone back to 100% stock android 4.0.3 after that you can start updating the phone to android 4.0.4 and then to 4.1 JB. Backup everything including the sdcard to be sure.
So if you flash the ruu you get stock Rom,kernel,recovery
After you are done updating to JB you can unlock the bootloader and flash a ustom recovery back and start using custom JB roms again
Click to expand...
Click to collapse
Ahaaaa thanks i understanded it well now,
But i want to know that i have to relock the bootloader first or run the ruu first?
Where can i find more RUU files for new softwares like 4.0.4 or 4.1? Is it include arabic language?​

{NOOB}[Root]Lollipop D5322 LB/UB

Hi Friends
Here is another Simple and noob friendly guide for rooting 5.0 on t2 ultra dual
Pre Requirements
1. Patient
2. 4.4.3 and 5.0 FTF
3. Flash tool
4. PRFCreator : http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
5. dual recovery http://nut.xperia-files.com/
6. chainfire root zip http://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
Now lets Do This.
1. Make complete Back up
2. download PRFCreator and extract zip, and double click on PRFCreator.exe
3. now locate FTF root zip and reovery zip and check all the options as per below screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Now hit Create and let it stay minimized as it will take approx 10 mins depending on your pc's speed
5. Now open flash tool and flash 4.4.3 firmware
6. Now root and install dual recovery http://forum.xda-developers.com/t2-ultra/general/root-t2882924
7. as soon as that is done your PRFCreator should have completed creating zip
8. take that zip and place on you sd card
9. Boot into recovery and flash that zip no need to wipe or do anything just flash
10. now go to reboot and power down system in short turn off your phone after flashing
11. now open flash tool and locate 5.0 ftf and uncheck all but system option check screen shot for batter understanding
12. Flash it and as soon as you done disconnect your phone leave it alone for about 5 to 7 mins
13. TADAAAAA YOUR PHONE IS ROOOOTEDDDDD :good:
NOTE: RECOVERY ON 5.0 WILL NOT WORK AS ITS DUE FOR UPDATE FROM NUT
HAVE FUN
If you root LP like this, did you still have sony xperia splash screen on booting or not? i root mine via flashing boot.img with recovery and than flashing su.zip and lolipop kernel back.. But now i have boot animation but i do not have splash screen before animation?
Sent from my D5322 using XDA Premium 4 mobile app
miki89 said:
If you root LP like this, did you still have sony xperia splash screen on booting or not? i root mine via flashing boot.img with recovery and than flashing su.zip and lolipop kernel back.. But now i have boot animation but i do not have splash screen before animation?
Sent from my D5322 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, the splash screen works this way. Everything else is the same, including the system R/W issue.
hello
thanks for your informative threads
I'm trying to root a t2 ultra single sim.
starting from scratch, I find your threads very helpful.
can you explain how to extract a kernel tft from an entire tft bundle created with flashtool / decrypt / create?
I can't use the ones you posted as I need the ones for the single sim version.
I created the tft files from experifilm (except the 4.4.2 wich is not on the server anymore, got it off the web)
thanks!
Bro if we flash again the system means we will lost root man....
dubmehard said:
hello
thanks for your informative threads
I'm trying to root a t2 ultra single sim.
starting from scratch, I find your threads very helpful.
can you explain how to extract a kernel tft from an entire tft bundle created with flashtool / decrypt / create?
I can't use the ones you posted as I need the ones for the single sim version.
I created the tft files from experifilm (except the 4.4.2 wich is not on the server anymore, got it off the web)
thanks!
Click to expand...
Click to collapse
open ftf using rar and u will find kernel.sin
that is your kernel
Renmazuo said:
Yes, the splash screen works this way. Everything else is the same, including the system R/W issue.
Click to expand...
Click to collapse
my friend follow guide u will have R/RW rights
chauhanjayc said:
open ftf using rar and u will find kernel.sin
that is your kernel
Click to expand...
Click to collapse
thanks, great.
I'm asking because I'm following your previous guide for 4.4.3
from the guide, point 4
4. now open flash tool and hit flash button and select 4.4.2.ftf press ok and wait for notification which says connect phone
is ok if I select the whole tft file and in the "EXCLUDE" section of flashtool I exclude ALL except the kernel?
is the same than flashing the single kernel.sin?
because I can't flash the single kernel.sin from flashtool... maybe I just don't know how to do it, yet..
thanks again for your reply, very helpful!
dubmehard said:
thanks, great.
I'm asking because I'm following your previous guide for 4.4.3
from the guide, point 4
4. now open flash tool and hit flash button and select 4.4.2.ftf press ok and wait for notification which says connect phone
is ok if I select the whole tft file and in the "EXCLUDE" section of flashtool I exclude ALL except the kernel?
is the same than flashing the single kernel.sin?
because I can't flash the single kernel.sin from flashtool... maybe I just don't know how to do it, yet..
thanks again for your reply, very helpful!
Click to expand...
Click to collapse
yes you can use both the way
full ftf and kernel.sin
to flash kernel.sin just select sin instead img at bottom check screen shot
pvnsai73 said:
Bro if we flash again the system means we will lost root man....
Click to expand...
Click to collapse
thats why i am asking to exclude system in flash tool
check screenshot
you made my day
all clear, now I have all the infos needed
just need to finish setting up the tft and then try...
if I'll be stuck somewhere I'll disturb you again, you were so helpful
many thanks for your time!
dubmehard said:
you made my day
all clear, now I have all the infos needed
just need to finish setting up the tft and then try...
if I'll be stuck somewhere I'll disturb you again, you were so helpful
many thanks for your time!
Click to expand...
Click to collapse
have fun
Could not sign Zip
need help
getting Could not sign zip Error
Very nice and clean guide, thanks bro.
lostfurby said:
need help
getting Could not sign zip Error
Click to expand...
Click to collapse
you can use unsigned zip no problem
also if i am not wrong either name of your supersu zip is changed or you are using very old version
so use newer one that might be an issue
works
Thanks a lot (Y)
It works without any issue.
chauhanjayc said:
thats why i am asking to exclude system in flash tool
check screenshot
Click to expand...
Click to collapse
Lol ? in the screenshot u didn't exclude the system u included the system u told reverse... We need to tick all and need to exclude system
5.0.2 ftf needed !!!!
Pl help me.... I cant update my device.. By phone if I start to install, it downloads, and finally reboot and says could not install.. I have downloaded all 5.0.2 FTF's currently uploaded.. All are waste. They are not getting installed. I am running stock 4.4.3 without root. I have also tried to install using PC companion .. It gets hold in 99% ..... I am Fed up..!! So pls help me .. Can you upload the 5.0.2 Firmware. A good one .. WHICH CAN BE INSTALLED.
Thanks. But I only do step 1-9, after dirty flash 5.0, the phone start normally, everything's fine. The R/W is ok now
Rahul1608 said:
Pl help me.... I cant update my device.. By phone if I start to install, it downloads, and finally reboot and says could not install.. I have downloaded all 5.0.2 FTF's currently uploaded.. All are waste. They are not getting installed. I am running stock 4.4.3 without root. I have also tried to install using PC companion .. It gets hold in 99% ..... I am Fed up..!! So pls help me .. Can you upload the 5.0.2 Firmware. A good one .. WHICH CAN BE INSTALLED.
Click to expand...
Click to collapse
USE this tool to download files and create ftf using flash tool
http://forum.xda-developers.com/crossdevice-dev/sony/pc-xperifirm-xperia-firmware-downloader-t2834142
download from here
http://forum.xda-developers.com/t2-ultra/general/ftf-d5322-19-3-0-470-customized-t3093092

Unroot and OTA htc one m8

Me again!! Sorry for spamming but i need little help here
I have an M8x unlocked version (CID no. HTC__621), S-ON, Rooted. Yesterday pop-up OTA update (number 4.24.709.3). My phone running Lollipop 5.0.2 (4.24.709.2). The phone must be "stock" to do an OTA, so i install the stock recovery (i understand the stock recovery this and is here). Once i do that i try to install OTA and the desaster come, my phone run into bootloop (stucked in htc logo) then i remember the backup i do before, so phone is now operating. the thing, i know, with root i can't install any update, so i want to go back into pure stock sense, with stock recovery to do the update, or at least come back to one version that allow make the OTA's (Android M is coming!!!) i'm a little dumb haha, i need some good soul to teach me exactly what to do to finally leave my phone alone and you guys, thank you so much 4 help me out!! (sorry for my bad english)
HTC One M8x
CID No. HTC__621
Firmware No. 4.24.709.2
Bootloader Unlocked
Factory Unlocked
Rooted
Custom Recovery TWRP
Meliragazza2571 said:
Me again!! Sorry for spamming but i need little help here
I have an M8x unlocked version (CID no. HTC__621), S-ON, Rooted. Yesterday pop-up OTA update (number 4.24.709.3). My phone running Lollipop 5.0.2 (4.24.709.2). The phone must be "stock" to do an OTA, so i install the stock recovery (i understand the stock recovery this and is here). Once i do that i try to install OTA and the desaster come, my phone run into bootloop (stucked in htc logo) then i remember the backup i do before, so phone is now operating. the thing, i know, with root i can't install any update, so i want to go back into pure stock sense, with stock recovery to do the update, or at least come back to one version that allow make the OTA's (Android M is coming!!!) i'm a little dumb haha, i need some good soul to teach me exactly what to do to finally leave my phone alone and you guys, thank you so much 4 help me out!! (sorry for my bad english)
HTC One M8x
CID No. HTC__621
Firmware No. 4.24.709.2
Bootloader Unlocked
Factory Unlocked
Rooted
Custom Recovery TWRP
Click to expand...
Click to collapse
You cannot take an OTA if you are rooted, have custom recovery. You MUST be absolutely stock ROM with stock recovery to take and install correctly OTA updates.
similar problem.. i flashed stock recovery but still getting installation aborted..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mushfiq20 said:
similar problem.. i flashed stock recovery but still getting installation aborted..
Click to expand...
Click to collapse
You can't even update if you "unrooted" your rom.
You must have NEVER rooted stock rom + recovery !
mushfiq20 said:
similar problem.. i flashed stock recovery but still getting installation aborted..
Click to expand...
Click to collapse
It's clearly shown in the log you have a rooted device or a unrooted previously rooted device, your binary is not stock
ckpv5 said:
It's clearly shown in the log you have a rooted device or a unrooted previously rooted device, your binary is not stock
Click to expand...
Click to collapse
so now what can i do if i want to update??
mushfiq20 said:
so now what can i do if i want to update??
Click to expand...
Click to collapse
Like i said, you need a never rooted stock backup. You should have made one after you flashed twrp to begin with.
But go to the backup threads and find the one that corresponds with your software build number. Restore it and flash the stock recovery. Then you can do ota
Had the same problem
I just wanted to share my experience. I had the same problem.
So I downloaded a twrp-backup of my version, since I failed to do proper backups myself. Then I unpacked it. The system.ext4.win### can be unpacked with tar.
Then I did a: (on my linux, but should work with cygwin for windows. It gives a list of the checksum of all files under the current directory)
find . -type f -exec md5sum {} \; > stock.md5
Uploaded the stock.m5 and compared to my phones files. md5sum -c stock.md5 works if you have it installed, if not, can make a script that uses the md5-command.
What I found in this OTA for me, was that my /system/bin/app_process32 was softlinked to /system/xbin/daemonsu, and thus had the wrong md5sum.
The original was saved, so I booted twrp and adb in to restore the file.
After that the OTA would run, and all looked good, until it rebooted, and got stuck at the boot-screen. Did the hold volume-up and power to reboot into bootloader. (Did it a few times before I read online that you must unplug the usb for it to work)
My OS was the new version (6.12.709.4), so it seemed as the important parts were updated right. I searched for a backup in the recovery-thread, but there was none yet.
After that fastboot boot twrp.img, to start it without flashing. And then did a full backup of phone again, and now unpacked my backup. Just looking through to see if any other softlink was wrong, I found that /system/bin/app_process had changed to also softlink to /system/xbin/daemonsu. (It was softlinked to app_process32 before...)
So I cd /system/xbin/ && rm app_process && ln -s app_process32 app_process
Then I rebooted, and now my phone is working great with android version 6.0.
Im not saying anyone should do like this. I just telling this for those who want to look around before flashing a binary downloaded from somewhere. So as per usual, dont blame me.
Mr Hofs said:
Like i said, you need a never rooted stock backup. You should have made one after you flashed twrp to begin with.
But go to the backup threads and find the one that corresponds with your software build number. Restore it and flash the stock recovery. Then you can do ota
Click to expand...
Click to collapse
I did as u said. from the backup thread i downloaded twrp backup of matching CID, restored it and flashed stock recovery and thn tried updating via OTA. but still no luck. is it happening because i career unlocked my phone?
mushfiq20 said:
I did as u said. from the backup thread i downloaded twrp backup of matching CID, restored it and flashed stock recovery and thn tried updating via OTA. but still no luck. is it happening because i career unlocked my phone?
Click to expand...
Click to collapse
Carrier unlocking has nothing to do with the OTA. As long as the firmware, ROM and stock recovery all match, there's no reason why you cannot take OTA updates. If you are rooted, however, you cannot take the updates, they will fail to install.
Einwod said:
Carrier unlocking has nothing to do with the OTA. As long as the firmware, ROM and stock recovery all match, there's no reason why you cannot take OTA updates. If you are rooted, however, you cannot take the updates, they will fail to install.
Click to expand...
Click to collapse
all the roms of the backup thread are non-rooted stock roms right? so it should have worked i guess.. but it didn't. is there any way to directly flash marshmallow sense stock rom? i found thread for GPE edition but didnt find any for sense edition. my CID is BM____001 btw...
Meliragazza2571 said:
Me again!! Sorry for spamming but i need little help here
I have an M8x unlocked version (CID no. HTC__621), S-ON, Rooted. Yesterday pop-up OTA update (number 4.24.709.3). My phone running Lollipop 5.0.2 (4.24.709.2). The phone must be "stock" to do an OTA, so i install the stock recovery (i understand the stock recovery this and is here). Once i do that i try to install OTA and the desaster come, my phone run into bootloop (stucked in htc logo) then i remember the backup i do before, so phone is now operating. the thing, i know, with root i can't install any update, so i want to go back into pure stock sense, with stock recovery to do the update, or at least come back to one version that allow make the OTA's (Android M is coming!!!) i'm a little dumb haha, i need some good soul to teach me exactly what to do to finally leave my phone alone and you guys, thank you so much 4 help me out!! (sorry for my bad english)
HTC One M8x
CID No. HTC__621
Firmware No. 4.24.709.2
Bootloader Unlocked
Factory Unlocked
Rooted
Custom Recovery TWRP
Click to expand...
Click to collapse
Have you solved your problem ? If not yet ... you can ask in my thread - http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
I'll help you because all your needed files are there.
I just checked all your 9 posts, seems like you not yet solve your problem
---------- Post added at 12:24 AM ---------- Previous post was at 12:21 AM ----------
mushfiq20 said:
all the roms of the backup thread are non-rooted stock roms right? so it should have worked i guess.. but it didn't. is there any way to directly flash marshmallow sense stock rom? i found thread for GPE edition but didnt find any for sense edition. my CID is BM____001 btw...
Click to expand...
Click to collapse
Which backup that you restored ? You need 4.20.666.2 and I don't see anywhere that backup is posted.
ckpv5 said:
Have you solved your problem ? If not yet ... you can ask in my thread - http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
I'll help you because all your needed files are there.
I just checked all your 9 posts, seems like you not yet solve your problem
---------- Post added at 12:24 AM ---------- Previous post was at 12:21 AM ----------
Which backup that you restored ? You need 4.20.666.2 and I don't see anywhere that backup is posted.
Click to expand...
Click to collapse
i restored this one.. https://www.androidfilehost.com/?fid=23578570567722629
i know this is not 4.20.666.2. but i thought if i could climb my way up to marshmallow from 1.55.666.4 by updating again and again.
mushfiq20 said:
i restored this one.. https://www.androidfilehost.com/?fid=23578570567722629
i know this is not 4.20.666.2. but i thought if i could climb my way up to marshmallow from 1.55.666.4 by updating again and again.
Click to expand...
Click to collapse
You can try. But I think the OTA will detect that the ROM number doesn't match your firmware number, and fail.
mushfiq20 said:
i restored this one.. https://www.androidfilehost.com/?fid=23578570567722629
i know this is not 4.20.666.2. but i thought if i could climb my way up to marshmallow from 1.55.666.4 by updating again and again.
Click to expand...
Click to collapse
That's too low version.
Have a look the thread linked in my signature. There's a non-rooted backup 3.34.666.4. Give me 5 minutes, I put up link for 4.20.666.1 so you do only 2 OTAs to Marshmallow - 4.20.666.1 --> 4.20.666.2 --> 6.13.666.7
If you're willing to wait, I can upload 4.20.666.2 tomorrow night as it is already late here and I need to go to bed soon. Make request in my thread so I don't forget (if this is needed)
Edit : Link for 4.20.666.1 updated
ckpv5 said:
That's too low version.
Have a look the thread linked in my signature. There's a non-rooted backup 3.34.666.4. Give me 5 minutes, I put up link for 4.20.666.1 so you do only 2 OTAs to Marshmallow - 4.20.666.1 --> 4.20.666.2 --> 6.13.666.7
If you're willing to wait, I can upload 4.20.666.2 tomorrow night as it is already late here and I need to go to bed soon. Make request in my thread so I don't forget (if this is needed)
Edit : Link for 4.20.666.1 updated
Click to expand...
Click to collapse
thank you so much. . i will have to flash it tomorrow anyway. but i guess 4.20.666.1 will be good enough. i dont have a problem with doing 2 OTA's
mushfiq20 said:
thank you so much. . i will have to flash it tomorrow anyway. so it would be great if you can upload 4.20.666.2 tomorrow. but 4.20.666.1 will do too.
Click to expand...
Click to collapse
Sure can .. but will be late night here after I come home from work (also my internet is not fast enough .. to upload a nandroid takes about 2-3 hrs)
ckpv5 said:
Sure can .. but will be late night here after I come home from work (also my internet is not fast enough .. to upload a nandroid takes about 2-3 hrs)
Click to expand...
Click to collapse
you dont have to go through the hassle. this version will do.. i just hope it works.
now this is weird.. i flashed 4.20.666.1 .. and when i check for software updates i get "There are no updates available for your phone." :/
mushfiq20 said:
now this is weird.. i flashed 4.20.666.1 .. and when i check for software updates i get "There are no updates available for your phone." :/
Click to expand...
Click to collapse
Keep your hair on and wait a while. It takes time sometimes for the updates to come through. You did flash the stock recovery as well?

4.19.161.2 RUU for Vodafone UK (VODAP001) ?

Hi Guys,
I am looking for the 4.19.161.2 RUU for Vodafone UK (VODAP001) , I downloaded one from here but it doesn't launch.
Can anyone help? I have reverted my phone with the 4.19.161.2 nandroid and restored the 4.19.161.2 recovery, i went to do an OTA update and it fails so if someone could help that would be great.
Kind regards
Jamie
Here is an image of what happens when i look at the ota update log
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
montythebrave said:
Here is an image of what happens when i look at the ota update log
Click to expand...
Click to collapse
That usually means you have the wrong stock nandroid, or the wrong stock recovery.
What does it say for OS number on your bootloader screen?
redpoint73 said:
That usually means you have the wrong stock nandroid, or the wrong stock recovery.
What does it say for OS number on your bootloader screen?
Click to expand...
Click to collapse
Oh shoot! really?
Does this image help?
montythebrave said:
Oh shoot! really?
Click to expand...
Click to collapse
That is usually what the "fingerprint" error message means, yes.
But in your case, it looks like you properly matched the stock nandroid and stock recovery to your OS (main version) number. I know that probably seemed like a stupid question (that you properly matched those). But you never know, sometimes it pays to check the seemingly obvious stuff first.
So this is the OTA update that was automatically downloaded to your phone when you checked for an update in Settings? Or did you load it manually?
redpoint73 said:
That is usually what the "fingerprint" error message means, yes.
But in your case, it looks like you properly matched the stock nandroid and stock recovery to your OS (main version) number. I know that probably seemed like a stupid question (that you properly matched those). But you never know, sometimes it pays to check the seemingly obvious stuff first.
So this is the OTA update that was automatically downloaded to your phone when you checked for an update in Settings? Or did you load it manually?
Click to expand...
Click to collapse
Yeah I was 100% sure everything matched, thi is just the OTA update it automatically downloaded and tried to install through the settings menu.
montythebrave said:
Yeah I was 100% sure everything matched, thi is just the OTA update it automatically downloaded and tried to install through the settings menu.
Click to expand...
Click to collapse
That's odd, I don't see why the OTA is failing then. Software says "Official" on the bootloader screen?
You might also try the stock nandroid and stock recovery files for 4.19.161.3. Again, you properly matched the OS number (and .3 actually doesn't match). But I don't think it hurts anything to try.
redpoint73 said:
That's odd, I don't see why the OTA is failing then. Software says "Official" on the bootloader screen?
You might also try the stock nandroid and stock recovery files for 4.19.161.3. Again, you properly matched the OS number (and .3 actually doesn't match). But I don't think it hurts anything to try.
Click to expand...
Click to collapse
But if it doesnt match isint this a waste of time?
I was really looking for the RUU file so I can 100% put it back to stock.
montythebrave said:
But if it doesnt match isint this a waste of time?
Click to expand...
Click to collapse
Not necessarily. Sometimes the files will work, when the numbers are that close together.
I don't know of or have access to the RUU for your version number, so I'm trying to think out of the box here.
montythebrave said:
Here is an image of what happens when i look at the ota update log
View attachment 3668710
Click to expand...
Click to collapse
redpoint73 said:
Not necessarily. Sometimes the files will work, when the numbers are that close together.
I don't know of or have access to the RUU for your version number, so I'm trying to think out of the box here.
Click to expand...
Click to collapse
His mistake is wrong recovery version. He is using the old KitKat recovery 2.22.161.6 to update 4.19.161.2 to 4.19.161.3
The error clearly stated "this device has htc/vodafone_uk/htc_m8:4.4.3/KTUL84L" recovery image
but the expected recovery is htc/vodafone_uk/htc_m8:5.0.1/LRX22C
ckpv5 said:
His mistake is wrong recovery version. He is using the old KitKat recovery 2.22.161.6 to update 4.19.161.2 to 4.19.161.3
The error clearly stated "this device has htc/vodafone_uk/htc_m8:4.4.3/KTUL84L" recovery image
but the expected recovery is htc/vodafone_uk/htc_m8:5.0.1/LRX22C
Click to expand...
Click to collapse
Aaaah ok so which recovery should i install? I appreciate your help
montythebrave said:
Aaaah ok so which recovery should i install? I appreciate your help
Click to expand...
Click to collapse
As written above, you need to install either 4.19.161.2 or 4.19.161.3 stock recovery image as you're updating from 4.19.161.2 to 4.19.161.3
ckpv5 said:
As written above, you need to install either 4.19.161.2 or 4.19.161.3 stock recovery image as you're updating from 4.19.161.2 to 4.19.161.3
Click to expand...
Click to collapse
I downloaded a link on this forum which said it was the 4.19.161.2 stock recovery but it must of been incorrect, do you have a link for it?
Kind Regards
Jamie
ckpv5 said:
As written above, you need to install either 4.19.161.2 or 4.19.161.3 stock recovery image as you're updating from 4.19.161.2 to 4.19.161.3
Click to expand...
Click to collapse
I just found this - http://forum.xda-developers.com/showthread.php?p=62516597#post62516597 and downloaded and flashed 4.19.161.3 recovery: https://mega.nz/#!3U8hmQBT!nxY_ZG-5P...Sy8VZ7VtazWFzw
It all seemed to update fine now, thank you so much for your help!
I have 1 last problem, i have the supersu installer on my phone and i want to remove it, how do I go about doing that?
Infact, the update hasnt went very well....
it boots up the htc splash screen then it goes to a black screen and nothing... its went from bad to worse , any suggestions?
I managed to get into the the recovery log, here is what it reports (i took the sd card out to see if it would boot without it in case this was causing it to fail to load)
You can't use a rooted ROM to OTA.
You need a non-rooted ROM for that.
Read and everything that you need is linked in my signature.
Restore 4.19.161.2 backup and its stock recovery then try again.
I can't always reply because I'm on holiday in Krabi, Thailand.
I have only 50mb free data daily.
ckpv5 said:
You can't use a rooted ROM to OTA.
You need a non-rooted ROM for that.
Read and everything that you need is linked in my signature.
Restore 4.19.161.2 backup and its stock recovery then try again.
I can't always reply because I'm on holiday in Krabi, Thailand.
I have only 50mb free data daily.
Click to expand...
Click to collapse
When I create a backup with the latest TWRP it says successful, i then reboot into recovery again and mount data and i see the twrp folder but when i go into it, it is blank.

Categories

Resources