So I recently checked sammobile to see if they had wind version of the firmware, before when i would search i would only see a MCT version which i found out was mobilicity.
However, now there are many versions and I dont know which ones are which
heres a link http://www.sammobile.com/firmware/?page=8&view=9161 let me know if any of these belong to Wind mobile.
MCRHAZ said:
So I recently checked sammobile to see if they had wind version of the firmware, before when i would search i would only see a MCT version which i found out was mobilicity.
However, now there are many versions and I dont know which ones are which
heres a link http://www.sammobile.com/firmware/?page=8&view=9161 let me know if any of these belong to Wind mobile.
Click to expand...
Click to collapse
The one that says GLW is the WindMobile one!
One of them (the one you posted) is the one that actually points to the file.
Related
Hi, I unrooted my note 8 GT-N5110 because it was acting all wacky. In searching for instructions on how to unroot (not that many) I wasn't too sure of which was the right official firmware to flash via odin. Though some of the few sites I found on official firmware, they somewhat always pointed me to http://samsung-updates.com/device/?id=GT-N5110 Now here is where I get confused. They have regions listed (sammobile does as well) but none of them say anything about USA or North America for that matter.
Can someone please tell me what region we are supposed to be using for this tablet (N5110). I ended up flashing the one from region FWD (Morocco) seemed to be the latest and everything is working fine. I did notice that there are two new Samsung apps that weren't on it out of the box ie: Learners Hub and Readers Hub.
My concern is that maybe I'm screwing with my future updates. Again can someone please help me with which is our region (USA).
Thanks in advance.
Try looking on http://www.sammobile.com/
You should be able to find the correct firmware. I flashed back to 4.1.2 for UK region (from 4.2.2)
PUNCHYS said:
Hi, I unrooted my note 8 GT-N5110 because it was acting all wacky. In searching for instructions on how to unroot (not that many) I wasn't too sure of which was the right official firmware to flash via odin. Though some of the few sites I found on official firmware, they somewhat always pointed me to http://samsung-updates.com/device/?id=GT-N5110 Now here is where I get confused. They have regions listed (sammobile does as well) but none of them say anything about USA or North America for that matter.
Can someone please tell me what region we are supposed to be using for this tablet (N5110). I ended up flashing the one from region FWD (Morocco) seemed to be the latest and everything is working fine. I did notice that there are two new Samsung apps that weren't on it out of the box ie: Learners Hub and Readers Hub.
My concern is that maybe I'm screwing with my future updates. Again can someone please help me with which is our region (USA).
Thanks in advance.
Click to expand...
Click to collapse
Check out mskip's All In One Tool. You should be able to easily do what you want with that.
You. Obviously didn't go to my thread in android development....
Sent from my SGH-T889 using Tapatalk 4 Beta
Hi,
I am not sure if this question has been asked before as I could not find anything similar here. If it has already been asked, then I would request the moderators to please point me there.
I have an AT&T Optimus G Pro (E980). It was running the stock rom (AT&T E980AT V10g). I then flashed the value pack from AT&T (AT&T E980AT V10k) which I downloaded by following the download link provided in thread http://forum.xda-developers.com/showthread.php?t=2438088
The flashing tool I used is the one that required the .tot file and the .dll file. Flashing was a success.
I found the value pack 10k to be laggy compared to the stock 10g. So, I wanted to try out a new rom and flashed a Korean one (SKT/SK TELECOM(KOREA) F240S V10w). I did that using the flash tool and the kdz file given in the same thread as stated above. Flashing was a success.
Now, I want to return again to the AT&T stock (AT&T E980AT V10g). But, when I am using the .tot file and the .dll file, the flashing tool is showing an error something about the device model being different and that I should check the .tot and .dll file. I cannot paste the exact error message right now as I am not at my desk but I can paste it later, if required.
Do I need to have a kdz file of the stock to carry out the flashing ? If yes, then where to find it as the stock firmware thread in this forum lists only the zipped up .tot for the AT&T stock rom.
Else, do I need a .dll for the F240S model and then use it along with the stock E980AT firmware to flash ? If yes, then where can I find the .dll file ?
Thanks for taking the time to read this post and thanks for helping out This can serve as a reference to someone who is looking for the same answer.
Regards.
sandyiscool said:
Hi,
I am not sure if this question has been asked before as I could not find anything similar here. If it has already been asked, then I would request the moderators to please point me there.
I have an AT&T Optimus G Pro (E980). It was running the stock rom (AT&T E980AT V10g). I then flashed the value pack from AT&T (AT&T E980AT V10k) which I downloaded by following the download link provided in thread http://forum.xda-developers.com/showthread.php?t=2438088
The flashing tool I used is the one that required the .tot file and the .dll file. Flashing was a success.
I found the value pack 10k to be laggy compared to the stock 10g. So, I wanted to try out a new rom and flashed a Korean one (SKT/SK TELECOM(KOREA) F240S V10w). I did that using the flash tool and the kdz file given in the same thread as stated above. Flashing was a success.
Now, I want to return again to the AT&T stock (AT&T E980AT V10g). But, when I am using the .tot file and the .dll file, the flashing tool is showing an error something about the device model being different and that I should check the .tot and .dll file. I cannot paste the exact error message right now as I am not at my desk but I can paste it later, if required.
Do I need to have a kdz file of the stock to carry out the flashing ? If yes, then where to find it as the stock firmware thread in this forum lists only the zipped up .tot for the AT&T stock rom.
Else, do I need a .dll for the F240S model and then use it along with the stock E980AT firmware to flash ? If yes, then where can I find the .dll file ?
Thanks for taking the time to read this post and thanks for helping out This can serve as a reference to someone who is looking for the same answer.
Regards.
Click to expand...
Click to collapse
Okay, I know exactly what your talking about!!, You have TWO Options!
1. (Easist) Change your Build Prop to be an E980 on your current rom and then try it
2. Flash the Telcel or Panama KDZ on your phone using LG Flashtools , and THEN flash the AT&T Version. That`s what I have had to do.
Heres a Guide in case you did not know http://forum.xda-developers.com/showthread.php?t=2420219 for flashing the Panama or Telcel rom.
hyelton said:
Okay, I know exactly what your talking about!!, You have TWO Options!
1. (Easist) Change your Build Prop to be an E980 on your current rom and then try it
2. Flash the Telcel or Panama KDZ on your phone using LG Flashtools , and THEN flash the AT&T Version. That`s what I have had to do.
Heres a Guide in case you did not know http://forum.xda-developers.com/showthread.php?t=2420219 for flashing the Panama or Telcel rom.
Click to expand...
Click to collapse
Hi,
Thanks for showing the way. I am currently on the Telcel rom and everything is working perfect, though I dislike the bloatware in this rom, be it as less as it is
I wonder if you can help with the following questions :
1) What is the difference between the Panama and Telcel (Mexico) Roms ? I assume both are based on E980H but Telcel should have more bloatware, as it is from a carrier. How much bloated is the Panama Rom ?
EDIT : Got the exact answer for the above question in thread http://forum.xda-developers.com/showthread.php?p=45722192&postcount=1
Panama rom is almost the same as Telcel's, but without the extra bloatware. I am definitely going to flash this one
2) I am from India. So I tried out flashing the India Rom (E988). Though the flashing was successful, there was no mobile operator network. Is this because of some baseband/modem mismatch issue ?
3) Would you happen to know which all roms are fully working on AT&T E980 devices that will work in India. I have tried out the Korean F240S and Telcel roms and both do work.
sandyiscool said:
Hi,
I am not sure if this question has been asked before as I could not find anything similar here. If it has already been asked, then I would request the moderators to please point me there.
I have an AT&T Optimus G Pro (E980). It was running the stock rom (AT&T E980AT V10g). I then flashed the value pack from AT&T (AT&T E980AT V10k) which I downloaded by following the download link provided in thread http://forum.xda-developers.com/showthread.php?t=2438088
The flashing tool I used is the one that required the .tot file and the .dll file. Flashing was a success.
I found the value pack 10k to be laggy compared to the stock 10g. So, I wanted to try out a new rom and flashed a Korean one (SKT/SK TELECOM(KOREA) F240S V10w). I did that using the flash tool and the kdz file given in the same thread as stated above. Flashing was a success.
Now, I want to return again to the AT&T stock (AT&T E980AT V10g). But, when I am using the .tot file and the .dll file, the flashing tool is showing an error something about the device model being different and that I should check the .tot and .dll file. I cannot paste the exact error message right now as I am not at my desk but I can paste it later, if required.
Do I need to have a kdz file of the stock to carry out the flashing ? If yes, then where to find it as the stock firmware thread in this forum lists only the zipped up .tot for the AT&T stock rom.
Else, do I need a .dll for the F240S model and then use it along with the stock E980AT firmware to flash ? If yes, then where can I find the .dll file ?
Thanks for taking the time to read this post and thanks for helping out This can serve as a reference to someone who is looking for the same answer.
Regards.
Click to expand...
Click to collapse
sandyiscool said:
Hi,
Thanks for showing the way. I am currently on the Telcel rom and everything is working perfect, though I dislike the bloatware in this rom, be it as less as it is
I wonder if you can help with the following questions :
1) What is the difference between the Panama and Telcel (Mexico) Roms ? I assume both are based on E980H but Telcel should have more bloatware, as it is from a carrier. How much bloated is the Panama Rom ?
EDIT : Got the exact answer for the above question in thread http://forum.xda-developers.com/showthread.php?p=45722192&postcount=1
Panama rom is almost the same as Telcel's, but without the extra bloatware. I am definitely going to flash this one
2) I am from India. So I tried out flashing the India Rom (E988). Though the flashing was successful, there was no mobile operator network. Is this because of some baseband/modem mismatch issue ?
3) Would you happen to know which all roms are fully working on AT&T E980 devices that will work in India. I have tried out the Korean F240S and Telcel roms and both do work.
Click to expand...
Click to collapse
Well as for Living in India Flashing a local rom does not always mean it will be better. As the device you have is meant to be in America meaning the India rom is pretty much gonna have its issue. I only recomend the Telcel or panama roms for the E980
Hi all,
I have a Galaxy S3 already and have been following this forum for a while, but I have never had problems with it as with this one. It's about my Galaxy S4 mini DUOS (i9192). I've bough the phone from an unofficial seller because i9192 was never supposed to be imported in Croatia (EU). The phone came with I9192XXUAMF7 build and modem. Today I've expereinced that the phone was running fine but I couldn't make any calls and nobody could call me untill I've taken out the battery and SIM. It was runnign on one SIM only. Network was OK and signal was full. I' would like to change the modem to see if that's the problem.
My question is - has anyone experienced anything similar or has changed the XXUAMF7 modem? I'm located in Croatia (Europe) and the closest country modem localisation is Ukraine. Should I change it to Ukraine modem?
|Vyp| said:
Hi all,
I have a Galaxy S3 already and have been following this forum for a while, but I have never had problems with it as with this one. It's about my Galaxy S4 mini DUOS (i9192). I've bough the phone from an unofficial seller because i9192 was never supposed to be imported in Croatia (EU). The phone came with I9192XXUAMF7 build and modem. Today I've expereinced that the phone was running fine but I couldn't make any calls and nobody could call me untill I've taken out the battery and SIM. It was runnign on one SIM only. Network was OK and signal was full. I' would like to change the modem to see if that's the problem.
My question is - has anyone experienced anything similar or has changed the XXUAMF7 modem? I'm located in Croatia (Europe) and the closest country modem localisation is Ukraine. Should I change it to Ukraine modem?
Click to expand...
Click to collapse
I find Ukraine/Russia/Afghanistan/Uzbekistan Modem/Rom combo best in my region ( Romania )
Take care tho latest roms contain Knox bootloader Either flash one that have bootloader removed that i posted on this forum, or u can try the rom i use
SilviuMik said:
I find Ukraine/Russia/Afghanistan/Uzbekistan Modem/Rom combo best in my region ( Romania )
Take care tho latest roms contain Knox bootloader Either flash one that have bootloader removed that i posted on this forum, or u can try the rom i use
Click to expand...
Click to collapse
Thanks for the notice! I have SGS 3 and it has no Knox bootloaders so I'm not familiar with it but from what I've read it's a no no. My original bootloader is stock Samsung. No Knox icons in download mode. I just might try your ROM. Have been reading about it just a few minutes ago.
I've been listing sammobile FWs and it gives me Russian and Ukrainian ROMs. You're suggesting I give one of them "a spin"?
|Vyp| said:
Thanks for the notice! I have SGS 3 and it has no Knox bootloaders so I'm not familiar with it but from what I've read it's a no no. My original bootloader is stock Samsung. No Knox icons in download mode. I just might try your ROM. Have been reading about it just a few minutes ago.
I've been listing sammobile FWs and it gives me Russian and Ukrainian ROMs. You're suggesting I give one of them "a spin"?
Click to expand...
Click to collapse
Yes BUT ! Do not download any firmware that have MK4 MK5 ML1 ML2 ML4 NA2 in name They contain Knox bootloader
I've looked on their site and sammobile.com and can't find one. Just want to install the stock and root it. Since it's wifi anyway, can I just install the Canadian or UK version?
ETA: 8.0 SM T310 version, forgot this forum isn't specific
Hello.
I found this thread, maybe it answers your question: http://forum.xda-developers.com/showthread.php?t=2435929
It says that "XAR is Cellular South which is a USA one", then from Sammobile: http://www.sammobile.com/firmwares/database/SM-T310/XAR/
And also I think you can install Canadian / UK version, there should not be problems.
3857 said:
Hello.
I found this thread, maybe it answers your question: http://forum.xda-developers.com/showthread.php?t=2435929
It says that "XAR is Cellular South which is a USA one", then from Sammobile: http://www.sammobile.com/firmwares/database/SM-T310/XAR/
And also I think you can install Canadian / UK version, there should not be problems.
Click to expand...
Click to collapse
You can easily install 4.4.2 from other countries, if you have SM-T310.
Hi Guys,
can someone please tell me where to find tmobile csc file for international version
thanks
pnjboyzz said:
Hi Guys,
can someone please tell me where to find tmobile csc file for international version
thanks
Click to expand...
Click to collapse
I don't think the US firmware T-mobile CSC will work in this case, I have not seen anything suggesting it's use is possible for this scenario..
Also if you search SamMobile for the firmware for your device and don't see T-Mobile firmware you will probably need to use custom firmware (with the features added) and root the device (required for custom firmware).
big thanks dude
is it possible to push tmobile CSC file into international version phone ?
pnjboyzz said:
big thanks dude
is it possible to push tmobile CSC file into international version phone ?
Click to expand...
Click to collapse
You could probably flash it if the files were released for the model of phone you are using (of which you have not said). At that rate your best off just flashing the carrier firmware itself to ensure full compatibility.
Looking at SamMobile I can find T-Mobile carrier firmware for the N975F, N9750, N975W and N9760