This is the complete original T-Mobile ROM running perfectly and beautifully on the AT&T I317... (NEW MULTI WINDOW UPDATE T889UVALK8 NOW AVAILABLE!)
-> Wifi-Calling perfecly working with T-Mobile Sim Card... (you need to have your AT&T I317 Sim Unlocked...)
-> If you are coming from stock AT&T or N7105 ROM, you don't even need to format/wipe data... just flash and all your data and apps will be there when it boots! but with T-Mobile ROM! (Some cases may require Full Wipe)
HOW TO ROOT AT&T I317
1. Make sure your phone is recognized by your computer by downloading the necessary Samsung Kies Drivers,
then... Download this file:
Galaxy Note 2 Root Kit
2. Unrar the downloaded file and you should have a folder called "Galaxy Note 2 Root Kit". Inside that folder, there is a file called "CWM-SuperSU-v0.97.zip", copy that file to your phone's internal memory. (you can also copy it to the external memory, but it is not recommended)
3. Put your phone into "Download Mode" by Turning it off, then press Power Button + Volume Down + Home Button (all 3 at the same time) and you will get into "Download Mode"... Ones you get there, Press Volume Up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. RECOVERY PART -> Now plug your phone into your computer, and run Odin 3 (Inside the Galaxy Note Root Kit folder you will see a sub folder called Odin3_vx.xx, and there you will see the Odin EXE file)
5. No make sure your Odin app looks like the image below: (Make sure the PDA option is set and click on the PDA button an look for the file called cwm6-recovery-i317.tar.md5 (inside the "Galaxy Note 2 Root Kit" folder. Also make sure it says "Added" on the message box on the left!)
6. Then click "Start"
7. Your phone will restart after flashing... When it boots up into android... Turn it off again.
8. Turn your phone on by pressing POWER + VOLUME UP + HOME BUTTON (at the same time) and as soon as you see the "Galaxy Note 2" splash, release the power button and keep pressing VOLUME UP + HOME BUTTON. You should get to the recovery you just flashed on the previous step.
9. SUPERUSER PART-> Now choose "Install zip from sdcard" and browse for CWM-SuperSU-v0.97.zip that you previously copied to the phone on Step 2.
10. After choosing the file, click YES (in order to install superuser on your phone... in other words, rooting android)
11. After flashing just go back on the menu and reboot device...
D O N E - > You are now rooted!
- - - AT THIS POINT YOU ***SHOULD*** BACKUP YOUR ROM (NANDROID) USING THE RECOVERY - - -
FLASHING THE T-MOBILE ROM:
You can use CWM Recovery or a more robust Recovery like TWRP in order to flash the T-Mobile ROM. Basically just copy the downloaded ROM into your phone and Flash It. You might not even need to wipe data or anything, just flash the rom and see how it goes... If for some reason your phone did not like the transition from one ROM to another without wiping data, then wipe data / cache and perform a clean install.
AT&T - T-Mobile APN's
VERSIONS...
Version 1 - STOCK T-MOBILE ORIGINAL RELEASE WITH WIFI CALLING Rooted, Deodexed, Busybox...
Version 2 - STOCK T-MOBILE NEW UPDATE WITH MULTI WINDOW + WIFI CALLING T889UVALK8 Rooted, Deodexed, Busybox...
- - - D O W N L O A D S - - -
VERSION 1
M I R R O R - 1
M I R R O R - 2
VERSION 2
M I R R O R - 1
Mirror 2 -> Uploading...
another...
and another...
4th
Sent from my SAMSUNG-SGH-I317 using xda premium
Nice!! Going to load this up on my friends phone for him.
Sent from my SAMSUNG-SGH-I317 using xda premium
Bajanman said:
Nice!! Going to load this up on my friends phone for him.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Link is Ready!
This is probably a dumb question, but how do you go about getting your ATT SIM CARD Unlocked?
I was with T Mobile for about 3 days before cancelling my contract and going to ATT and the only thing I liked about their service was the WI FI Calling their phones could do - I would love to be able to do this while on ATT - but didn't know if there was some way to retain ATT Service while unlocking the sim card?
like I said - probably a dumb question .. ?
mocsab said:
This is probably a dumb question, but how do you go about getting your ATT SIM CARD Unlocked?
I was with T Mobile for about 3 days before cancelling my contract and going to ATT and the only thing I liked about their service was the WI FI Calling their phones could do - I would love to be able to do this while on ATT - but didn't know if there was some way to retain ATT Service while unlocking the sim card?
like I said - probably a dumb question .. ?
Click to expand...
Click to collapse
You need to have your AT&T phone unlocked (is not the actual sim card) and you need to use an actual T-Mobile sim card, so you can use wifi calling... (since wifi calling is just for T-Mobile and can't be used on any other carrier) With this rom, you can use the AT&T sim card without any problem, just like any other rom, but if you own a T-Mobile sim card, then you can use the Wifi Calling feature without owning the T-Mobile's Note 2 (T889) Because this is the exact ROM loaded on the T889... (but now on the AT&T I317)
Very good job, thank you.
Warren87 said:
Very good job, thank you.
Click to expand...
Click to collapse
Thank you! creating some simple guides right now... so everyone can have some simple step by steps...
Sweet!!
Flashing T889 modem on i317
Hello
I flashed this T-Mobile Rom onto my ATT Note 2 i317, but not getting 4g speed, only edge, was wondering if the T-Mobile Modem/Baseband can be flash on this ATT Note 2 i317?
Please advise
the screen shots you are showing for the APN Settings for ATT do not have anyhting Entered for MMS Port and it should say 80.
That is what my APN settings say - and it is what all previous instructions I have seen for ATT APN have said - I don't know if it is absoutley necessary but I would thnk that it might be important -
Just thought I would let you know
kofusionz03 said:
Hello
I flashed this T-Mobile Rom onto my ATT Note 2 i317, but not getting 4g speed, only edge, was wondering if the T-Mobile Modem/Baseband can be flash on this ATT Note 2 i317?
Please advise
Click to expand...
Click to collapse
Yes you will get Edge on T-Mobile (currently) But soon there will be a flashable modem that should support T-Mo... Will post updates as they arrive.
mocsab said:
the screen shots you are showing for the APN Settings for ATT do not have anyhting Entered for MMS Port and it should say 80.
That is what my APN settings say - and it is what all previous instructions I have seen for ATT APN have said - I don't know if it is absoutley necessary but I would thnk that it might be important -
Just thought I would let you know
Click to expand...
Click to collapse
Thank you a lot for mentioning this... (for some reason mine came without the 80, and works fine) Will certainly look into this... Thank you!
TEKHD said:
Thank you a lot for mentioning this... (for some reason mine came without the 80, and works fine) Will certainly look into this... Thank you!
Click to expand...
Click to collapse
No Problem - I honestly don't' know how important it is - I have always had 80 in that field - and I have seen it in other instructions from other ROMS that needed to have the APN Manually entered - but I don't know that it absolutely must be there - I had noticed that someone else posted that they couldn't get LTE - so maybe it has something to do with that?
Anyway - I hope it helped.
any new tmobile radio updates for 3/4g on the note 2 for att?
Any chance you could post another mirror? I've tried to download this 7 times and it always stops on me at different points.
JarkMackson said:
Any chance you could post another mirror? I've tried to download this 7 times and it always stops on me at different points.
Click to expand...
Click to collapse
Downloaded already?
Sent from my SGH-T889 using XDA Premium HD app
kdm212 said:
any new tmobile radio updates for 3/4g on the note 2 for att?
Click to expand...
Click to collapse
This is how you enable 4g on your att note 2 on tmobile network, i have 4g on my att note 2 on tmobile network:
http://forum.xda-developers.com/showthread.php?t=2068041
---------- Post added at 09:38 AM ---------- Previous post was at 09:36 AM ----------
First off, let me say i love this rom! i have a at&t note 2 running on t-mobile network with 4g, 42 mbps. my only problem is that the camera pics are come out in a different rotation than i originally took them in. any ideas?
Related
Another EDIT as of 7/12/13. go here for additional info/How to do it.
LINKY
EDIT: GO HERE FOR WORKING GOOGLE WALLET. DO NOT DOWNLOAD CWM.ZIP INFORMATION BELOW IS FOR INFORMATIVE PURPOSES ONLY
http://forum.xda-developers.com/showthread.php?t=2031127
If you've been trying to run Google Wallet on your USA variant Note II you've probably ran into some problems. like this one..
"Insufficient secure element privileges for this system image (release-keys)."
why is this happening? check HERE for more detail.
But for the sake of keeping everything together in this thread..
Ok, first a little background
basically what you are seeing if you try to install google wallet on at&t, tmo, etc, is you get stuck on "activating device"
If you dig a little further and ran a logcat, you will see that there it no "SMX detected"
What this means, when compiling the rom you need to enable SmartMX in the config headers located in the external/libnfc-nxp library. (thats why it works on CM9, they do this)
this is impossible for us because there is no source for samsung's TouchWiz. We got a break on the international sgs3 as the latest update has the secure element enabled...so does the sprint sgs3
Click to expand...
Click to collapse
So, All i did was rip a handful of lib files and whatnot out of a International SGS3 (I-9300) and push them onto my Note II. and viola! you get all the ways to the point where you actually try and add the card. then things go downhill.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you can find information on people having the same problem we're now stuck at HERE
all you need is a rooted Galaxy Note II to flash the zip. must be running Touchwiz. should work on all US and International variants (providing it has an Exynos4412 in it)
Should go without saying, but this is my first CWM zip. it's been working fine for me the multiple times I've tested it. but you're on your own if you have problems. And i'm not responsible for damage.
NOTE: in my experience it doesn't matter where you get the Google Wallet APK from. I modified my build.prop to match the Galaxy Nexus and got it from the market. also tried the modified Modaco one from HERE with no change.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Nice work!
Sent from my SGH-T889 using xda premium
Thank you !
crazy talk said:
If you've been trying to run Google Wallet on your USA variant Note II you've probably ran into some problems. like this one..
"Insufficient secure element privileges for this system image (release-keys)."
why is this happening? check HERE for more detail.
But for the sake of keeping everything together in this thread..
So, All i did was rip a handful of lib files and whatnot out of a International SGS3 (I-9300) and push them onto my Note II. and viola! you get all the ways to the point where you actually try and add the card. then things go downhill.
you can find information on people having the same problem we're now stuck at HERE
all you need is a rooted Galaxy Note II to flash the zip. must be running Touchwiz. should work on all US and International variants (providing it has an Exynos4412 in it)
Should go without saying, but this is my first CWM zip. it's been working fine for me the multiple times I've tested it. but you're on your own if you have problems. And i'm not responsible for damage.
NOTE: in my experience it doesn't matter where you get the Google Wallet APK from. I modified my build.prop to match the Galaxy Nexus and got it from the market. also tried the modified Modaco one from HERE with no change.
Click to expand...
Click to collapse
Did you by chance change your build prop?
crazy talk said:
If you've been trying to run Google Wallet on your USA variant Note II you've probably ran into some problems. like this one..
"Insufficient secure element privileges for this system image (release-keys)."
why is this happening? check HERE for more detail.
But for the sake of keeping everything together in this thread..
So, All i did was rip a handful of lib files and whatnot out of a International SGS3 (I-9300) and push them onto my Note II. and viola! you get all the ways to the point where you actually try and add the card. then things go downhill.
you can find information on people having the same problem we're now stuck at HERE
all you need is a rooted Galaxy Note II to flash the zip. must be running Touchwiz. should work on all US and International variants (providing it has an Exynos4412 in it)
Should go without saying, but this is my first CWM zip. it's been working fine for me the multiple times I've tested it. but you're on your own if you have problems. And i'm not responsible for damage.
NOTE: in my experience it doesn't matter where you get the Google Wallet APK from. I modified my build.prop to match the Galaxy Nexus and got it from the market. also tried the modified Modaco one from HERE with no change.
Click to expand...
Click to collapse
Im not even able to get past anything it just says my device is not supported
xso0j1nx said:
Im not even able to get past anything it just says my device is not supported
Click to expand...
Click to collapse
did you edit the Build.Prop to this?
Code:
ro.product.model=Galaxy Nexus
ro.product.name=yakju
ro.product.device=maguro
i had zero success editing the build.prop using the free stuff from the market. either make the changes from Root Explorer, or use ADB to pull it off the device, edit it and push it back on.
Well, I got Wallet to launch successfully, haven't used it yet but will do so tomorrow. Thanks for the help!
How did u add a card
farfromovin said:
Well, I got Wallet to launch successfully, haven't used it yet but will do so tomorrow. Thanks for the help!
Click to expand...
Click to collapse
And then I couldnt add a card...
Sent from my Galaxy Note 2
farfromovin said:
And then I couldnt add a card...
Sent from my Galaxy Note 2
Click to expand...
Click to collapse
this is where we're all getting stuck at. not sure what to do after that point. or what's causing the error in the first place...
I have used Google wallet and I already have cards added to my wallet account. Besides adding the card, has anyone tried just activating their current cards?
Esteef said:
I have used Google wallet and I already have cards added to my wallet account. Besides adding the card, has anyone tried just activating their current cards?
Click to expand...
Click to collapse
Yes tried activating current card , new cards, diffrent gmail. Maybe it has something to do with the nfc.apk if u try and change it. u wull lose nfc I think tmobile learned from the s3 not to make it so easy to get wallet working. If u open the apk w winrar you can see a lib file inside. Maybe thats key because wallet isnt seeing something from are phone that will get it to work like the s3 thread if u go into about in gwallet. Ull see controller applet version is empty thats what we need to figure out how to fix.esteef go into gwallet, about see if u have a controller applet version.thanks
b3ltazar said:
Yes tried activating current card , new cards, diffrent gmail. Maybe it has something to do with the nfc.apk if u try and change it. u wull lose nfc I think tmobile learned from the s3 not to make it so easy to get wallet working. If u open the apk w winrar you can see a lib file inside. Maybe thats key because wallet isnt seeing something from are phone that will get it to work like the s3 thread if u go into about in gwallet. Ull see controller applet version is empty thats what we need to figure out how to fix.esteef go into gwallet, about see if u have a controller applet version.thanks
Click to expand...
Click to collapse
If you were using GW on your last phone you have to either reset GW on the old device or login to GW in a browser and disable it. then you should be able to add the card. thats what i did at least. i also do it every time i flash a rom.
Ghuslez28 said:
If you were using GW on your last phone you have to either reset GW on the old device or login to GW in a browser and disable it. then you should be able to add the card. thats what i did at least. i also do it every time i flash a rom.
Click to expand...
Click to collapse
and that's letting you add the card on the Note II?
google wallet not working no matter what I try
so i get an error about root
ive installed the zip
changed the build.prop. with no luck
im on frosty v1
Has anyone tried using the older version?
1.5-R79-V5 -?-
http://forum.xda-developers.com/showthread.php?t=1881914
This works for others who get the same error message--
They say you have to push the .apk to /system/app, though--
(I'm not rooted yet, so I can't try it-- might root tonight and give it a shot.)
prepaidguy9081 said:
so i get an error about root
ive installed the zip
changed the build.prop. with no luck
im on frosty v1
Click to expand...
Click to collapse
it would still work when you get the unsupported device message the problem we are having is when adding cards we get unexpected error.
Going to try pulling more of the NFC based stuff from the international variants and pushing them onto ours to see if that makes an improvement. Right now all that zip does it update the libs down in /system/lib and /system/etc.
so, next test= NFC.apk and NFCtest.apk from the N7100. using the apk's from the I9300 cause bootloops.
EDIT: successfully pushed in the NFC apks from the N7100. but no change in Google Wallet when using the Modaco version.
crazy talk said:
Going to try pulling more of the NFC based stuff from the international variants and pushing them onto ours to see if that makes an improvement. Right now all that zip does it update the libs down in /system/lib and /system/etc.
so, next test= NFC.apk and NFCtest.apk from the N7100. using the apk's from the I9300 cause bootloops.
EDIT: successfully pushed in the NFC apks from the N7100. but no change in Google Wallet when using the Modaco version.
Click to expand...
Click to collapse
even the sprint and international note 2 users are having the same problems as us when adding cards. we need to find a note 2 that has gwallet enabled sucessfully. maybe the note 2 is lacking hardware?? this is frustrating
RANT
WTF!!! isnt this illegal for the to block since they are trying to "monopolize" so that we have to use their sh!t(ISIS) they are not allowing competition so that they can implement their own payment system whenever they get it ready????
sorry this has bugged me since i got my first note. and i know its been covered... i feel much better now.
Since im on 4.1.2 ota update fully stock with only root
my friend seanzscreams modded the apk for us so all credits go to him
So here is the secphone.apk without the increasing ringtone + now with call recording
i have only tested it on ATTK7 4.1.2 BASE ROM so dont know if it will work on others
how to install must be rooted
download your favorite root explorer
you can put your phone in airplane mode if you like
nav. to system/app
copy paste SecPhone.apk
set permission to rw-r--r--
then you must delete the "SecPhone.odex" in /system/app after installing
REBOOT
Use at your own risk. I am not responsible for any damage this mod causes to your phone.
here is seanzscreams Thread go hit the thanks button on him
DOWNLOAD HERE
Vrtheme install for your themed phone.apk cwm thanks to sling
http://www.mediafire.com/?ej2r8dqkigb6grn
working on
CleanRom 4.5
JEDI XP11
CleanRom 1.2
i317m, Canadian version, Running Stock Rooted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tested it on cleanrom 4.0.5 with Rogers and this works flawlessly. Thanks!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
No problem glad to hear that it works on other roms
Sent from my SAMSUNG-SGH-I317 using xda premium
carlospr21 said:
No problem glad to hear that it works on other roms
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Try to load this on Jedi xp9 without any success.. I didn't see the sec phone.odex
Current Devices: At&t Samsung Galaxy Note, Verizon Samsung Galaxy Nexus, Asus Google Nexus 7 Super Tablet
Current Roms: Jedi XP 9 (Note 2), AOKP (Galaxy Nexus), Nexus 7 Stock
Bsmith0731 said:
Try to load this on Jedi xp9 without any success.. I didn't see the sec phone.odex
Current Devices: At&t Samsung Galaxy Note, Verizon Samsung Galaxy Nexus, Asus Google Nexus 7 Super Tablet
Current Roms: Jedi XP 9 (Note 2), AOKP (Galaxy Nexus), Nexus 7 Stock
Click to expand...
Click to collapse
Wierd it work on clean rom 4.0.5 and its the same base of jedi xp9 did u set permission right ??
Sent from my SAMSUNG-SGH-I317 using xda premium
Why doesn't it work with the headset?
highlanderx said:
Why doesn't it work with the headset?
Click to expand...
Click to collapse
I use the iph0ne5 earbuds and i can talk perfectly
Sent from my SAMSUNG-SGH-I317 using xda premium
Work perfect with CleanRom 4.5 on Rogers. Thanks!
Sent from my SGH-I317M using xda premium
Thank you so much! Working without a hitch on CleanRom 1.2!
Sent from my SAMSUNG-SGH-I317 using xda premium
Successful Run
Thanks SEANZSCREAMS!!!! I just installed this on a Note 2, i317m, Canadian version, Running Stock Rooted 4.1.2 from MrAnderson.
The US ATT version is the i317 (no "M"). The last three digits of my build are MA3 so I was a little apprehensive about loading something for a K7 build.
TIP: (1) Before doing anything, run a full backup of Titanium Pro all Apps and System Data, just to be safe, yeah NANDS are great but there are work arounds so the counter doesnt get tripped-HA!!
(2) Copy the apk file to your SD card in your phone and using your favorite root explorer, also move the existing system file (SecPhone.apk) you are replacing to a new folder on your SD card, that way you still have it in case you need to, you can delete the MOD and put it back. clever huh?
(3) Now that the stock SecPhone.apk file has been MOVED (not deleted) to a special place of its own ON YOUR SD CARD (NOT internal), go ahead and move the new SecPhone.apk into the System/app folder and change its permissions, guess what, you wont need to install it, because
MOVING it to the folder will do that for you, set your permissions (play with the little check boxes until you get "rw-r-r").
(4) Now DONT delete the SecPhone.odex file, but instead MOVE it to the special folder on your SD card you created just for this exercise.
(5) You did it. Reboot and enjoy Call Recording!!
NOTE: Anytime instructions tell you to delete a file, DONT EVER DO THAT!!!!! MOVE it to an external, non-booting folder in case you have to put it back. Makes Sense doesn't it?
No Ascending Ringer + Call Reccord
Steve.99 said:
Work perfect with CleanRom 4.5 on Rogers. Thanks!
Sent from my SGH-I317M using xda premium
Click to expand...
Click to collapse
Hi I can not find SecPhone.odex file to delete. I know CleanRom 4.5 is de-odex Rom. But you have it work? Please Tell me how?
I did copy the SecPhone.apk file in System/app then I got stuck?
Carrier Rogers
SGH-I317M
CleanRom 4.2.5
BaseBand: J2
jimaginet said:
Hi I can not find SecPhone.odex file to delete. I know CleanRom 4.5 is de-odex Rom. But you have it work? Please Tell me how?
I did copy the SecPhone.apk file in System/app then I got stuck?
Carrier Rogers
SGH-I317M
CleanRom 4.2.5
BaseBand: J2
Click to expand...
Click to collapse
Since CleanROM is already de-odexed, you don't have to delete the odex file...You need to copy the file to \system\app (which you said you did already - did you back up the original file?) and set the permissions correctly... reboot and that's it.
No Ascending Ringer + Call Recording
royalh said:
Since CleanROM is already de-odexed, you don't have to delete the odex file...You need to copy the file to \system\app (which you said you did already - did you back up the original file?) and set the permissions correctly... reboot and that's it.
Click to expand...
Click to collapse
Thank you for quick reply
Yes I did. I moved the original to sd card and copy the new one in. after that my phone lock up. I did not even have a change to set permission. And honestly
I have no idea how to set permissions. Check all box? I saw there are 3 rolls of check box. what should I do? Please let me know
Thanks
jimaginet said:
Thank you for quick reply
Yes I did. I moved the original to sd card and copy the new one in. after that my phone lock up. I did not even have a change to set permission. And honestly
I have no idea how to set permissions. Check all box? I saw there are 3 rolls of check box. what should I do? Please let me know
Thanks
Click to expand...
Click to collapse
I'm guessing you have a custom recovery set? CWM or TWRP? If so, try going into recovery and setting the proper permissions (User: rw Group: r Other: r) or you have TWRP, you can choose the "Set Permissions" option and see if that fixes it...
royalh said:
I'm guessing you have a custom recovery set? CWM or TWRP? If so, try going into recovery and setting the proper permissions (User: rw Group: r Other: r) or you have TWRP, you can choose the "Set Permissions" option and see if that fixes it...
Click to expand...
Click to collapse
I do have TWRP. I did not know if I can set permission using TWRP?. Anyway I just went back to System/app and checked out the permission setting of the original SecPhone.apk file. I saw only 4 checks box. So again I copied the new SecPhone.apk back and set permission exactly to original file. and reboot. It works....Cool!!!
Thanks
Anyone tried this on a 4.2.2 build, like Jedi?
Sent from my SGH-I317M using xda premium
Works great on stock 4.1.2
Anyone know how to change where they get stored? I want to be able to store recordings on my micro sd card.
Anyway how to make it always record automatically?
Phone: Galaxy Note II - SGH-i317M* Provider: Telus Rom: Stock - rooted (JB 4.1.2) Kernel: Stock Recovery: Stock
--------------
Thanks to the Devs hard work and the power of sharing!
There is no way to save it to sd card. Hope the developer who creates this mod will change it in the near future. I also wish that I can record the ringing sound too.
Love this mod
Sent from my SGH-I317M
has this beeen proven to work with BT headest as well?? last i heard, no solution has been found whereby calls can be recorded while using a BT headset????
I've searched this thread and can't seem to find out where the call recordings are saved. Can anyone help me?
Btw, I'm running JEDI XP11 and installation seemed to go well.
This is a work in progress. All that is needed is now are the correct libs or a lib fix. Tap and Pay will not even attempt to set up with the stock build.prop. What you have to do is change the build.prop to the Galaxy Nexus and then it will have you turn NFC on and attempt to set up the phone but we will need a lib fix much like for the S4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMPORTANT INFO AND LINKS - PLEASE READ - ESPECIALLY AOSP USERS
Note II - I got Working Google Wallet from here - Refer to Crazy Talk OP ----> Click Here
For Galaxy S4-----> joemagistro thread - Click Here
Click to expand...
Click to collapse
Recommended build.prop Editor - Jrummy Build Prop Editor
Click to expand...
Click to collapse
AOSP USERS - FOR OLDER METHODS ONLY - Method 1 was an attempted way to reduce steps, if this does not work, do not worry, uninstall Google Wallet and clear the app data and cache, reboot to recovery and do a wipe cache and dalvick cache, reboot and move to Method 2, you should have no issues
Click to expand...
Click to collapse
ALWAYS! ALWAYS! ALWAYS! RESET GOOGLE WALLET BEFORE YOU FLASH A NEW ROM OR YOU COULD LOSE IT FOREVER
Click to expand...
Click to collapse
BEWARE - BEFORE YOU BEGIN - 1st Picture provided by fireishott - 2nd Picture by firstflyer
After seeing people struggle and research, this appears to still block Google Wallet from completely setting up and initializing. The regular SIM cards do not do it, but the ISIS or NFC appears to be doing the damage. I am not sure if it is possible to switch to a non NFC SIM, but you are more than likely OUT OF LUCK with this SIM Card...Remember this does not guarantee success, but if you hit a wall and just can't get any luck it is a last ditch effort and probable cause to your issues
Refer to Troubleshooting Step 4 in post #2 to possibly solve the issue
Click to expand...
Click to collapse
Work in Progress - Method 1 - Preferred - This will be what it looks like - Universal for TW/AOSP/Deodex/Odex ROMS
1. Make sure you don't have the wallet apk installed and if you do, wipe the data and cache of the app, then uninstall or if you have it in the system, delete it.
2. Make sure you turn off "auto-update" in the play store for the wallet app.
3. Download
TouchWiz Only----> DO NOT DOWNLOAD YET!! Patched Wallet & NFC Lib Fix
AOSP Only----> DO NOT DOWNLOAD YET!! AOSP Wallet
4. Change build.prop to Galaxy Nexus - Use Jrummy Build.prop Editor (Changes did not stick with reboot) or Root Exolorer - (DO NOT RESTART UNTIL ALL 3 PARTS ARE CHANGED)
Galaxy Nexus
ro.product.device=maguro
ro.product.model=Galaxy Nexus
ro.product.name=yakju
5. Reboot into Recovery
6. Flash Note 3 Libs You downloaded in Step 2 - (ALWAYS WIPE CACHE AND DALVICK BEFORE FLASHING ZIPs)
7. Reboot Phone
8. Open the wallet app and start the setup. Wallet should already be installed from when you flashed the zip in recovery! It might take some time, so be a bit patient. (Make Sure NFC is ON)
10. Set Up Tap and Play so it's 100% and ready to make purchases (you should see the credit card you have on file - if not Add One).
11. Reboot again, just so you can test
12. Change Your build.prop back to stock once you verify Wallet Opens with no issues
T-Mobile Galaxy Note 3
ro.product.device=hltetmo
ro.product.model=SM-N900T
ro.product.name=hltetmo
MORE INFO
Originally Posted by siraltus View Post
OK, here's some technical info.
The Play Store installs two different versions of the Wallet 2.0 app, depending on whether you present yourself as an NFC-pay supported phone (via build.prop values) or not.
If you change your build.prop to be, say, the Sprint Note 2 (SPH-L900 t0ltespr) and then install Wallet from the Play Store, you will get the NFC-pay enabled version. All other phones get the "castrated" version.
Now, on Note 3, even if you do that, there a few things Sucksung/T-Mobile did in the stock ROM (completely reversible) to make NFC-pay on Wallet not work.
First, they removed the Wallet signature keys from /etc/nfcee_access.xml, so Wallet will complain it doesn't have sufficient privileges to the secure element. That's fine - you just add the keys back (get them from any AOSP ROM), and boom, Wallet has access to the secure element again.
Then, there are a few other bits and pieces of system software (libraries and kernel modules) that I'm trying to figure out that need to be in place for Wallet to work, as right now it just FCs. If not me, then someone will probably beat me to putting together a "fix" ZIP package that will re-enable Wallet on the stock ROM.
This problem, of course, will not be present on any AOSP ROM as all the required bits are included in those by default.
Also, remember Wallet 2.0 no longer includes a root, region, or carrier check, so "Wallet Patcher" plugins for XPosed or anything like that are not required.
The way to set up NFC-pay enabled Wallet 2.0 on an unsupported device (with a ROM that hasn't been carrier-castrated to disable NFC-pay):
1. Change your build.prop to masquerade as a supported device (e.g., SPH-L900 t0ltespr) and reboot.
2. Go to Play Store, install Wallet.
3. Launch Wallet and set it up as usual. Once it finishes and you see "Ready to Tap and Pay" undearneath your Wallet balance, you're good.
4. Restore your build.prop to its original values and reboot. Wallet NFC-pay will remain working.
Click to expand...
Click to collapse
Give Thanks To:
Hopefully Can Fill This In Soon!
If you were left out its not by intention just PM Me
CLICK RED LETTERS....... IT IS A LINK ON WRITE UP TO MODIFY NfcNci.apk to use secure element
Based on this read, all I think we need is the nfcee_access.xml with the google Keys which I already have.....and then we need to modify the NfcNci.apk
As far as the libs go, they might be extra, however they don't cause harm being in the system at all....I want to try with and without...I will if I can learn how to decompile the apk like in the write up. Pretty close to an answer at this point
Got the Release Keys from AOSP ROM and got past the error above but Wallet is foreclosing......I have tried pulling the libs from sprint but im sure there is some framework edits minor if at all. Giving it a rest tonight...Reaching out from help and keeping a look out on progress
Op I don't know if this will help you any but it worked well on my old s3 alot of people claim it works on the s4 you might want to check it out.
http://forum.xda-developers.com/showthread.php?t=2457569
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Just to warn everyone, as it says in the OP, do not flash that package at all. Especially since TWRP restoring doesn't work.
Glad you are taking this project on!I'll I can't wait until you get it figured out! Keep up the Good work!
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Anyone try ISIS?
It's ****. They disable amazing gwallet for this stupid proprietary ****.
Doesn't work on root, only supports 3 card companies.
Note 3 came with isis card and bloatware, yet they forgot this app. Avoid this trash. They are cowards.
Let's get gwallet working
wing_addict_usa said:
Anyone try ISIS?
It's ****. They disable amazing gwallet for this stupid proprietary ****.
Doesn't work on root, only supports 3 card companies.
Note 3 came with isis card and bloatware, yet they forgot this app. Avoid this trash. They are cowards.
Let's get gwallet working
Click to expand...
Click to collapse
It works on root if you install the ISIS Root Bypass mod for Xposed.
That said, it is utter garbage. Slow, clunky, poorly laid out, and generally trash. Good it uses the secure element in the ISIS SIM card and not in the phone so you can use Google Wallet concurrently.
firefreak664 said:
Op I don't know if this will help you any but it worked well on my old s3 alot of people claim it works on the s4 you might want to check it out.
http://forum.xda-developers.com/showthread.php?t=2457569
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Def am looking at that, thanks for that info, I am trying to pull from the international version as well as any CM bases
@bdorr1105 I see something in the zip that may be causing an issue....
system > lib > hw > nfc_nciMSM8960.so
MSM8960 is for dual core qualcomm not quad core. For Note 3 it's nfc.MSM8974.so
If you're going to add a nfc_nci patched file, it'd still have to be MSM8974 I believe...
itsmikeramsay said:
@bdorr1105 I see something in the zip that may be causing an issue....
system > lib > hw > nfc_nciMSM8960.so
MSM8960 is for dual core qualcomm not quad core. For Note 3 it's nfc.MSM8974.so
If you're going to add a nfc_nci patched file, it'd still have to be MSM8974 I believe...
Click to expand...
Click to collapse
Yea thanks I have the MSM8974.so from the sprint Note 3, thats what I am pulling from as well as from the international and seeing what works. Those zips are for the Note 2, its just an example, I didn't remove the links from my other OP, I am just giving a preview of what the OP will look like
bdorr1105 said:
Yea thanks I have the MSM8974.so from the sprint Note 3, thats what I am pulling from as well as from the international and seeing what works. Those zips are for the Note 2, its just an example, I didn't remove the links from my other OP, I am just giving a preview of what the OP will look like
Click to expand...
Click to collapse
AH I see ok gotcha. Great, if anything comes to mind I'll let you know bro...
darkjedi said:
Just to warn everyone, as it says in the OP, do not flash that package at all. Especially since TWRP restoring doesn't work.
Click to expand...
Click to collapse
huh?
Restore worked for me....
itsmikeramsay said:
AH I see ok gotcha. Great, if anything comes to mind I'll let you know bro...
Click to expand...
Click to collapse
Thanks appreciate it
thinkjoey said:
huh?
Restore worked for me....
Click to expand...
Click to collapse
Which version are you using?
So I tried everything so far, libs, etc, I noticed that NFC will turn on with the NFC apks, but when you swap back to the originals NFC turns on, I am still stock and I think ODEX has something to do with it, I will experiment now on the Deodexed ROM and see what happens.
itsmikeramsay said:
Which version are you using?
Click to expand...
Click to collapse
I am trying to find it. I guess i can go into recovery
i have v2.6.3.1
I had to restore yesterday when something did not install alright...restored fine
bdorr1105 said:
So I tried everything so far, libs, etc, I noticed that NFC will turn on with the NFC apks, but when you swap back to the originals NFC turns on, I am still stock and I think ODEX has something to do with it, I will experiment now on the Deodexed ROM and see what happens.
Click to expand...
Click to collapse
Yeah I'd recommend using a deodexed ROM... Try stock deodexed....
thinkjoey said:
I am trying to find it. I guess i can go into recovery
i have v2.6.3.1
I had to restore yesterday when something did not install alright...restored fine
Click to expand...
Click to collapse
Ok cool, seems the most stable is 2.6.3.1, users can't restore with x.x.x.0 or x.x.x.2
itsmikeramsay said:
Yeah I'd recommend using a deodexed ROM... Try stock deodexed....
Ok cool, seems the most stable is 2.6.3.1, users can't restore with x.x.x.0 or x.x.x.2
Click to expand...
Click to collapse
Def trying stock deodexed, the libs are not named the same either....
I can give examples from the lib folder....changing any of the names of the Sprint libs to match TMO Stock don't work, but I think i was on to something, I think the can coexist together, and it will use depending on the nfc.apk, but ODEX cause me issues, I redolved the Google RSA Keys issue, thats bypassed, if I can get NFC to turn on after the lib swap then hopefully will be good. the NFC Access is good to go. I know it didnt force close NFC until I went back to the stock NFC apk
No luck still....wallet force closes, not exactly sure what is causing it. I switched the NfcNci.apk and NfcTest.apk with Sprint and it broke NFC....went back to stock and NFC turns on. I can only fix Insufficient RSA Keys.
Sent from my SM-N900T using XDA Premium 4 mobile app
So here are the steps I follow to use the Sprint LG G2 (ls980) with any rom on Tmobile or AT&T in the US
*This thread is specifically for the LS980. Some of the information might apply to other phones, but I can't say for sure.
***Caveats of using this phone Tmobile or AT&T:
-LTE doesn't work. Missing lte bands. Highest we get is hspa+.
-Haven't tested Custom Kernels
-instead of 4g or LTE logo, it says gsm all of the time (paid app that will safely change icons without system crashes linked below)
-Had to use 3rd party app to change radio and apn settings (see below)
-Wifi on stock 4.4.2 didn't turn on twice in the last 2 weeks when coming from a wakeup. Had to reboot to fix.
Again, I did not do any work. I have only compiled this information from various forums. Most of this work comes from cloudyfa, the find from pvinodnayak, the unlock from ysabxe and countless members in the sprint unlock forum and the old sprint build prop forum before the unlock was released. I have just compiled information. Thank op's for their work.
There are multiple ways to use the Sprint LS980 on Tmobile or AT&T. Before we get into them, please do the following:
- root phone with ioroot http://forum.xda-developers.com/showthread.php?t=2522346
- use autorec to install TWRP
http://forum.xda-developers.com/showthread.php?t=2715496
*If you notice now that when you screen goes to sleep, and when you try to activate the screen it shows a whole bunch of white lines, boot into recovery and install the G2PanelSwap. [/url]http://forum.xda-developers.com/showthread.php?t=2792844[/url]
There are 2 ways to accomplish using our phone. (be sure to scroll down to the bottom to see the 2nd way. You might want to to this instead of the first way.)
1st Way - Use your phone on Stock Sprint Software
***If you are already on the ZVC firmware, people have noted problems using the following instructions..There are constant system crashes. It is recommended to restore back to an earlier version, make the changes below, then take the ota upgrade. You can go back to stock by following this guide.
LG G2 Stock Firmware (Go Back to Stock) - xda-developers
http://forum.xda-developers.com/showthread.php?t=2432476
If you prefer to stay on ZVC, please follow jsergio123's guide found here:
http://forum.xda-developers.com/showpost.php?p=52915223&postcount=814
1-setup phone and Download root browser
https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree
and a rar extractor.
https://play.google.com/store/apps/details?id=com.rarlab.rar
2-Download the ls980simfinalunlock.rar
http://forum.xda-developers.com/showthread.php?t=2655133
3-extract the rar and copy the carrier contents and use root.explorer to over write the files in the root carrier folder.
4- Download Rom toolbox lite
https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox
and use it to Update the build.prop (reboot between each. You can turn on airplane mode in the meantime to stop the system ui from crashing)
ro.carrier=spr
ro.build.target_operator=spr
persist.service.crash.enable=1
Found from this post.
http://forum.xda-developers.com/showthread.php?p=49945052
*After trying numerous build.prop edits, I have found that they all cause system crashes. Please only use the ones listed above. If you hate the GSM icon, I have found a way to change it. https://play.google.com/store/apps/details?id=it.ptoti.g2_tweaksbox . Install it, and then buy the premium pack for $1. (cmon its only a buck.) After you unlock all features, Click on Theme Tweaks -> and make sure Enable Theme MOD is selected. Then click on Status bar. Then make sure Enable Status Bar Mod is On. Then scroll down "Change status bar's icon set" You can choose through different icons from different carriers. I prefer the Tmobile one. They will take affect after reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5-Use Radio Switcher to check and set what radio to use. I use LTE\GSM\WCDMA
https://play.google.com/store/apps/details?id=com.snclabs.radioswitcher
6-Use Tweakker MMS APN app to set APN
https://play.google.com/store/apps/details?id=com.tweakker
*Note - Some users get force closes when trying to make a phone call. For some reason, you need to add a number 1 to your contact before you call
If you want to fix this manually, Follow the following fix found by jsergio123)
*To fix the issue of the com.android.phone process crashing when you don't dial a 1 in front of the number edit the /data/data/com.android.providers.settings/databases/settings.db file with a SQLlite editor and change in the "system" table "assist_dial" and "assist_dial_init_db_check" to "0". If you don't see those 2 rows then you can add them. Fix permissions, wipe cache and reboot.
Another workaround is that I have found an app that will automatically add 1's to every one of your contacts.
https://play.google.com/store/apps/details?id=com.maplekeycompany.apps.numberfixer
Install it and open it -> click Add area/country code -> change the dropdown to 10 and hit ok -> and in the area code, erase the area code part leaving just the number 1 -> Fix all. It will prompt you for how many numbers it will add the number 1 to all contacts.
2nd Way - Flash a rom
After you have Rooted and Flashed and possibly the G2Panelswap , you may want to consider installing a rom that works out of the box. It is much easier.
Here is a list of roms that work out of the box that I have personally tested. I know there are more.
***Update***
In all of cloudyfa's latest rom builds they do not work out of the box. I had to install the rom without my sim card in. Then download and install rom toolbox lite (see step 4 above) and change ro.carrier to spr (make sure its lowercase.)
I then turned off my phone, put in my sim card, installed radio switcher (link in step 5 above) and chose WCDMA preferred. Everything worked after that.
Cloudystock =stock http://forum.xda-developers.com/showthread.php?t=2661866
Cloudyflex =LG flex port http://forum.xda-developers.com/showthread.php?t=2618864
Cloudy pro II = Optimus pro port http://forum.xda-developers.com/showthread.php?t=2680745
CloudyG3 =G3 port http://forum.xda-developers.com/showthread.php?t=2783192
Let me know in the forum what other roms you find that work out of the box and I will link them here. Please remember that unless a rom specifically states it works for AT&T or Tmobile, or is a general rom that is 1 rom made for different versions of the phone, than it most likely won't work. There are lots of roms to look through in the G2 development section as well. http://forum.xda-developers.com/lg-g2/development
Very interesting. . I struggle to do many of these and after reading thru your I find it so easy. . Thanks for your post. .
I have two queries
1. Can we flash any T-Mobile Rom or it has to be a Sprint one
2. Do we need to change the modem or stock zvc modem would work
3. Does WiFi hotspot work.fine.with the stock Rom
Thanks
Sent from my LG-D801 using Tapatalk
lipak said:
1. Can we flash any T-Mobile Rom or it has to be a Sprint one
2. Do we need to change the modem or stock zvc modem would work
3. Does WiFi hotspot work.fine.with the stock Rom
Click to expand...
Click to collapse
1. Sprint roms only.
2. Don't change the modem.
3. Not tested, but go here and get the file. http://forum.xda-developers.com/showthread.php?t=2584775
Use the files listed above to boot into twrp. Flash it. Flash the file to fix things listed above and reboot.
Sent from my LG-LS980 using Tapatalk
9-Use Radio Switcher to check and set what radio to use. I use LTE\GSM\WCDMA
https://play.google.com/store/apps/details?id=com.snclabs.radioswitcher
10-Use Tweakker MMS APN app to set APN
https://play.google.com/store/apps/details?id=com.tweakker
Sent from my LG-LS980 using Tapatalk[/QUOTE]
I try downloading the Radio Switcher app, but it doesn't work, it gives me a message that is not compatible with my phone!
gatolsf said:
9-Use Radio Switcher to check and set what radio to use. I use LTE\GSM\WCDMA
https://play.google.com/store/apps/details?id=com.snclabs.radioswitcher
10-Use Tweakker MMS APN app to set APN
https://play.google.com/store/apps/details?id=com.tweakker
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
I try downloading the Radio Switcher app, but it doesn't work, it gives me a message that is not compatible with my phone![/QUOTE]
There are lots of apps to get you to these settings. Here is another one. https://play.google.com/store/apps/details?id=de.mangelow.network
Sent from my LG-LS980 using Tapatalk
I've try different apps this is the message i get every time
Sent from my LG-LS980 using Tapatalk
brandonbarlow said:
1. Sprint roms only.
2. Don't change the modem.
3. Not tested, but go here and get the file. http://forum.xda-developers.com/showthread.php?t=2584775
Use the files listed above to boot into twrp. Flash it. Flash the file to fix things listed above and reboot.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Flashed thru TWRP but No wifi Hotspot
Update : followed step 8, edited build prop and now the teethering option is available..
Sent from my LG-LS980 using Tapatalk
thanks!
Thanks!!!
Haven't tried yet. But this is the first post I saw that can unlock LS980 with AT&T/Tmobile.
I tried the following thread, but it only unlocks internationally and doesn't work with AT&T/Tmobile..
Permanent SIM Unlock for LS980 (OTA, APN) JB 4.2.2, KK 4.4.2
http://forum.xda-developers.com/showthread.php?t=2655133&page=46
---------- Post added at 02:52 PM ---------- Previous post was at 02:42 PM ----------
Should I just start from Step 8?
I already followed the "Permanent SI Unlock for LS980 (OTA, APN) JB 4.2.2, KK 4.4.2" thread, so I did the following extra steps "To make APNs stick automatically:", is this fine?
To make APNs stick automatically:
1. Replace apns-conf.xml in Folder /etc/
2. Delete File telephony.db in Folder /data/data/com.android.providers.telephony/databases
-------------------------------------------
brandonbarlow said:
6-setup phone and Download root browser
https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree
and a rar extractor.
https://play.google.com/store/apps/details?id=com.rarlab.rar
Download the ls980simfinalunlock.rar
http://forum.xda-developers.com/showthread.php?t=2655133
7-extract the rar and copy the carrier contents and use root.explorer to over write the files in the root carrier folder.
8- Download Rom toolbox lite
https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolbox
and use it to Update the build.prop (reboot between each. You can turn on airplane mode in the meantime to stop the system ui from crashing)
ro.carrier=spr
ro.build.target_operator=spr
persist.service.crash.enable=1
Things to try if you are still having system crashes.
Set
ro.build.target_country=US
Try this to change icon from gsm to "H"
ro.build.target_operator=OPEN (might cause system ui error)
Delete lteconfigs.apk in system/app and reboot.
9-Use Radio Switcher to check and set what radio to use. I use LTE\GSM\WCDMA
https://play.google.com/store/apps/details?id=com.snclabs.radioswitcher
10-Use Tweakker MMS APN app to set APN
https://play.google.com/store/apps/details?id=com.tweakker
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
brandonbarlow said:
I try downloading the Radio Switcher app, but it doesn't work, it gives me a message that is not compatible with my phone!
Click to expand...
Click to collapse
There are lots of apps to get you to these settings. Here is another one. https://play.google.com/store/apps/details?id=de.mangelow.network
Sent from my LG-LS980 using Tapatalk[/QUOTE]
Do you have to go through the whole unlocking process for those apps to work? It says its incompatible with my phone but I haven't tried unlocking yet so just want to be sure. Also is this just for GSM usage or would I be able to switch back and forth? I want to test it out before I decide to actually cancel with sprint and go with tmobile. My friend is letting me hold on to an extra tmobile sim so planning to try it with that.
Sprint blocks gsm in the US. You have to do steps 6 and 7 to have gsm unlocked. That is why it is failing for you. Once it's unlocked, you can still use sprint
Sent from my LG-LS980 using Tapatalk
I'm trying to do this with Omnirom, and there is no carrier folder that I can paste the folders into. Any suggestions?
razgriz8426 said:
I'm trying to do this with Omnirom, and there is no carrier folder that I can paste the folders into. Any suggestions?
Click to expand...
Click to collapse
Are you using root explorer, and backing out all the way to the top directory?
Also, this thread isn't meant for troubleshooting per say, it's just a list of steps that I did. If you are having problems with a certain step, go to the linked thread and troubleshoot there, as they are the real developers who did the fix.
Sent from my LG-LS980 using Tapatalk
staplestaples said:
Thanks!!!
Haven't tried yet. But this is the first post I saw that can unlock LS980 with AT&T/Tmobile.
I tried the following thread, but it only unlocks internationally and doesn't work with AT&T/Tmobile..
Permanent SIM Unlock for LS980 (OTA, APN) JB 4.2.2, KK 4.4.2
http://forum.xda-developers.com/showthread.php?t=2655133&page=46
---------- Post added at 02:52 PM ---------- Previous post was at 02:42 PM ----------
Should I just start from Step 8?
I already followed the "Permanent SI Unlock for LS980 (OTA, APN) JB 4.2.2, KK 4.4.2" thread, so I did the following extra steps "To make APNs stick automatically:", is this fine?
To make APNs stick automatically:
1. Replace apns-conf.xml in Folder /etc/
2. Delete File telephony.db in Folder /data/data/com.android.providers.telephony/databases
-------------------------------------------
Click to expand...
Click to collapse
I didn't ever see those steps in the op. They would probably help. But at any rate, yes. Each thread brought us one step closer to using this phone in the US. I kept trying over and over what step to do in what order to get it to work, and then wrote this guide. The way to listed in the op of permanently unlock is a great way to do it, I just thought dropping the folder in is easier.
Sprint blocks gsm everywhere, unless you get it unlocked through them. The permanent unlock let's us bypass that restriction and lets us use gsm, but still doesn't bypass sprints measures to block gsm in the US. The build prop changes do that. Everything else listed is just the tools I used to change everything.
Sent from my LG-LS980 using Tapatalk
When switching Roms, you might need to make the build. Prop changed again, but you shouldn't ever have to do the unlock again. Also, op updated with possible new changes to get rid of the gsm icon and shows H for HSPA . Its working well so far.
Sent from my LG-LS980 using Tapatalk
brandonbarlow said:
When switching Roms, you might need to make the build. Prop changed again, but you shouldn't ever have to do the unlock again. Also, op updated with possible new changes to get rid of the gsm icon and shows H for HSPA . Its working well so far.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Spoke too soon. After a reboot, lots of force closes with the new TMO settings. Back to spr and the GSM icon it is....
Sent from my LG-LS980 using Tapatalk
brandonbarlow said:
Are you using root explorer, and backing out all the way to the top directory?
Also, this thread isn't meant for troubleshooting per say, it's just a list of steps that I did. If you are having problems with a certain step, go to the linked thread and troubleshoot there, as they are the real developers who did the fix.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Yes, when I try to create a folder in the top directory, it doesn't stay after reboot. I assume this has something to do with the way Android works, but someone please correct me if I'm wrong.
Deleted.
razgriz8426 said:
Yes, when I try to create a folder in the top directory, it doesn't stay after reboot. I assume this has something to do with the way Android works, but someone please correct me if I'm wrong.
Click to expand...
Click to collapse
You shouldn't be creating a new folder. You should be finding the already existing carrier folder, and overwriting its contents.
brandonbarlow said:
You shouldn't be creating a new folder. You should be finding the already existing carrier folder, and overwriting its contents.
Click to expand...
Click to collapse
Right, but the issue is that Omnirom does not have a carrier folder.
Don't know what to tell you. You can try just the build. Prop mods starting on step 8. People have had success with asop based Roms. I have only used stock based Roms. Also, again this question would be more for the permanent unlock forum linked above.
Sent from my LG-LS980 using Tapatalk
Feel free to post any questions here. I will do my best to help.
-eZ
Sent from my iPad using Tapatalk
First is THANK YOU eZ for making this happen for all of us. This ROM is rock solid and it rocks!! Great job.
However I am having issues with my AT&T network. The stock APN is constantly stuck at 3G & 4G ONLY and drops internet or total connectivity (w/ LTE/WCDMA/GSM enabled). I 've tried adding and selecting the APN:
" Settings/Connections/More networks/Mobile networks/Access Point Names
Click what ever there, and change it to:
"Name: ATT Phone
APN: phone
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
APN type: internet+mms
Leave all other options blank!"
But it bounces back to stock default.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-I317 using Tapatalk
Hi im from mexico and actually i have installed your great rom eZKAT, long ago tried to install DN3 ROM did not work, had then had the stock 4.2.2 rom with root, Can I install the DN3 from EzKat?
In advance I apologize if I my question should not having done so in this thread.
1976Nano said:
Hi im from mexico and actually i have installed your great rom eZKAT, long ago tried to install DN3 ROM did not work, had then had the stock 4.2.2 rom with root, Can I install the DN3 from EzKat?
In advance I apologize if I my question should not having done so in this thread.
Click to expand...
Click to collapse
Yes...you'll be good...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 06:44 PM ---------- Previous post was at 06:40 PM ----------
slicingtaco said:
First is THANK YOU eZ for making this happen for all of us. This ROM is rock solid and it rocks!! Great job.
However I am having issues with my AT&T network. The stock APN is constantly stuck at 3G & 4G ONLY and drops internet or total connectivity (w/ LTE/WCDMA/GSM enabled). I 've tried adding and selecting the APN:
" Settings/Connections/More networks/Mobile networks/Access Point Names
Click what ever there, and change it to:
"Name: ATT Phone
APN: phone
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
APN type: internet+mms
Leave all other options blank!"
But it bounces back to stock default.
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
ATT Phone ...is the correct default APN..
Check your baseband...
It should be UCUBMK6...
Additionally ...the APN settings you listed above do not match the correct ATT APN...
Let it default...and check your baseband...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
I just flashed this last night. Works great, howeverit doesnt have themes. Im thinking about trying a 4.3 rom. My question is is there anything i should watch out for when switching from kitkat to jb and later possibly switching back.
Another question is is s pen enabled on this rom ? I cant find the icon to enable handwriting
Edit : im not able to enable handwriting, cant find the icon on the keyboard to enable it
Edit 2: the only way I can manage to switch to handwriting mode is to take out the s pen. Is the handwrite mode icon on the keyboard somewhere ? Also after I write a word it doesnt seem to enter into the texts, the writing pad just simply move to the right to show more writing room
Please some help, never had a samsung before not really familar with everything
optimusv45 said:
I just flashed this last night. Works great, howeverit doesnt have themes. Im thinking about trying a 4.3 rom. My question is is there anything i should watch out for when switching from kitkat to jb and later possibly switching back.
Another question is is s pen enabled on this rom ? I cant find the icon to enable handwriting
Edit : im not able to enable handwriting, cant find the icon on the keyboard to enable it
Edit 2: the only way I can manage to switch to handwriting mode is to take out the s pen. Is the handwrite mode icon on the keyboard somewhere ? Also after I write a word it doesnt seem to enter into the texts, the writing pad just simply move to the right to show more writing room
Please some help, never had a samsung before not really familar with everything
Click to expand...
Click to collapse
You have to DL the language in keyboard settings
Sent from my NoteII
Thank man but can you be more specific ? What is DL ?
Edit: I figured it out! DL means download ! It's working like it should! Thanks!
Just some feedback on my experience and installation:
Came from DN3 (I believe I'm on the MK5 N7105 kernel from the DN3 post)
-Did a clean (install new ROM) wipe using latest Philz
-Wipe Dalvik
-Flashed ROM
-Flashed SuperSU
-Booted fine with no problems other than no root
rebooted to recovery (Philz still) and re-flashed SuperSU
-booted fine again but no root
rebooted into recovery and used Philz fix root option
-booted again fine with root.
All told took less than 10 minutes as has been running fine since then (5 days). Super stable, fast and slick so thanks and good work eZ!
Hardware is a i317m on the Koodo network in Canada.
Only problem - no LTE icon, but I do get 4G which I understand is the same thing.
Can this be flashed over stock (but rooted) 4.3?
I feel like doing a dirty flash today.
Anonymously_Unknown said:
Can this be flashed over stock (but rooted) 4.3?
I feel like doing a dirty flash today.
Click to expand...
Click to collapse
Give it a shot and tell us how it worked out!
Air Command?
This may be a dumb question, but does this ROM have Air Command? Thanks.
No
Sent from the TermiNOTEr 2!
Kidvr6 said:
This may be a dumb question, but does this ROM have Air Command? Thanks.
Click to expand...
Click to collapse
No..but myself, @sawdoctor and @Bajanman are working with the Eteam currently to update dn3 to kit kat. So that will have air command. Keep an eye on that thread.
Sent from my NoteII
eZdubzitmk4 said:
No..but myself, @sawdoctor and @Bajanman are working with the Eteam currently to update dn3 to kit kat. So that will have air command. Keep an eye on that thread.
Sent from my NoteII
Click to expand...
Click to collapse
Thanks, will keep an eye out.
With this rom in place Do I still need to worry about att forcing an ota to me and me bricking because no stock recovery ?
optimusv45 said:
With this rom in place Do I still need to worry about att forcing an ota to me and me bricking because no stock recovery ?
Click to expand...
Click to collapse
No.
There will be no Ota pop ups. Even if there was you would have to click accept and stuff for it to download. Don't worry about it man.
Sent from my NoteII
Thanks man. I traded my note2 for a S4. Now I'm learning all these stuff about MF3 and safetrap, seems complicated haha he is open to trading back and I'm thinking about coming back to note2
optimusv45 said:
Thanks man. I traded my note2 for a S4. Now I'm learning all these stuff about MF3 and safetrap, seems complicated haha he is open to trading back and I'm thinking about coming back to note2
Click to expand...
Click to collapse
Not a bad idea....IMHO...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
the guy traded my note 2 back. S4 was great but note 2 is more fun
Thanks
Thanks for this. Two questions, will MJ4 bootloader work for this? and is Google Wallet tap and pay working?