Develop Bugs

[Q] Phone deactivated?

I was running latest paranoid android and I wiped cache/dalvic cache after flashing Cerberus in recovery and when the phone booted up it was asking me to Activate (sprint service) my phone. I've never seen this with flashing roms and was wondering if this is a known issue with flashing roms on the S3 or something that can randomly occur from time to time.
Anyone have experience with this before? I had been running Paranoid Android for less than 24 hours but initially didn't have any problems whatsoever.

Itll do that sometimes depending on the rom. Usually does it after a factory reset and installing a cm based rom. Its just asking you to add your google account... you should be fine
sent from my thumbs

youdoofus said:
Itll do that sometimes depending on the rom. Usually does it after a factory reset and installing a cm based rom. Its just asking you to add your google account... you should be fine
sent from my thumbs
Click to expand...
Click to collapse
This didn't have anything to do with my Google account. I guess I should have been more specific, I mean that my phone is deactivated on Sprint's network as in I can't make phone calls and all the info is missing in about phone. Phone number, PRL and such. I am flashing back to stock right now and hope this fixes it. Will probably give paranoid another go but this doesn't sound like a common issue because I haven't been able to find anything by searching.

When you get back to stock it'll probably reactivate itself. If not (although you can do this regardless just in case), ##72786# in the dialer should set you straight. If I'm not mistaken the screen you're referring to should be gone when you boot stock regardless. Its a bug. Doesn't work for a sprint phone but still buried in the rom

Ahhh... could try manually flashing your modem after the install too
sent from my thumbs

billard412 said:
When you get back to stock it'll probably reactivate itself. If not (although you can do this regardless just in case), ##72786# in the dialer should set you straight. If I'm not mistaken the screen you're referring to should be gone when you boot stock regardless. Its a bug. Doesn't work for a sprint phone but still buried in the rom
Click to expand...
Click to collapse
Soon as I flashed the stock rom it tried to activate and initially failed and prompted me to reboot. Second attempt it was successful and then I immediately flashed back to PA and it is working. Going to give it another shot and keep the stock rom on my sd card this time in case I get stuck in a pinch.

I jumped the gun, phone activated fine but signal drops in and out randomly and will not connect to 3g. Just reflashed to stock again and everything seemed fine but signal was still back in and out. Checked under status and PRL read "0" tried updating to no avail so did the dialer code and it did the activation and all is right in the world again, or at least for the moment.
Just trying to figure out why when I flash Paranoid all my settings just disappear
*edit*
Just flashed back to PA this third time after fully making sure that the phone was working and had 3G data and all was right with the world (my phone). Will update if it goes South again but as of right now the phone is behaving properly. Maybe it just wasn't working right the first time and I didn't notice since I was on wifi. Only thing that keeps me from thinking that is I didn't get the Activation message until 12 hours or so after I had flashed and had been using the phone. /shrug

I still think flashing a modem in recovery after installing PA would yield a poisitve result
sent from my thumbs

youdoofus said:
I still think flashing a modem in recovery after installing PA would yield a poisitve result
sent from my thumbs
Click to expand...
Click to collapse
how do you flash a modem? I am new to this and this is also a problem that I am having with the same rom. I tried searching for a fix and this is where i landed.
Thank you,
and sorry if i am breaking forum rules

[Q] bluetooth error after 4.2 update

HI guys,
Need your help with something, i updated my GN to 4.2 yesterday was on stock android 4.1.2 with unlocked bootloader and unrooted, i installed the 4.2 update after i was notified by the phone about the update everything went well no hiccups no stops and restarting of the phone or anything. Everything appeared to work well until i got home in the evening and tried to bluetooth some stuff from my wife's S1 to my GN. When the phone tries to recieve the bluetooth toggle comes on and off about ten times and the phone acts all crazy asking if yuo want to accept file or not and a message box appears about sending google a report that comes up and goes comes up and goes. Is there any recommendation on how i could possibly fix this.
Edit: Also i can send files through bluetooth, i can't receieve. Also restarting the phone or taking out the battery for a minute didn't help
Thanks

Same problem here

viveksn said:
Same problem here
Click to expand...
Click to collapse
What I did was use the galaxy nexus toolkit and flashed 4.1 back on my phone and did the update again - so far so good with no issues

[Q] What is wrong with my Gnex?

Hey the Problem is the following:
3-5 random reboots every day
restarts during every phonecall after 1-3 Minutes
freezes when in standby, cant turn back on -> need to take battery out
often slow, especially when switching apps. or when typing
I have tried stock 4.3, CM10.2 recently and before that CM10.1 for a while.
I already send it in but they only said my battery is broken.
Is it possible that all my problems come from this?
I rather think my flash memory is broken? What you think?

JonnyZaggi said:
Hey the Problem is the following:
3-5 random reboots every day
restarts during every phonecall after 1-3 Minutes
freezes when in standby, cant turn back on -> need to take battery out
often slow, especially when switching apps. or when typing
I have tried stock 4.3, CM10.2 recently and before that CM10.1 for a while.
I already send it in but they only said my battery is broken.
Is it possible that all my problems come from this?
I rather think my flash memory is broken? What you think?
Click to expand...
Click to collapse
Since yesterday I am facing the same problems you are describing. At first I thought it was a bad flash or something like that. Clean installed various 4.3 costum roms and it's always the same.
Right now I will look deeper into it since the phone is unusable in that condition.
If I find a solution I will comment.
Best regards
Edit: Okay, works again flawlessly. I simply flashed an nightly from carbon-rom and the lags were gone. Hope it helps. What exactly caused the lag I don't know. For now I am staying on 4.2.2 Carbon as it is my favourite rom anyway and I will wait till there are stable 4.3 from carbon.

Are you sure it's the phone and not an app?

chrisinsocalif said:
Are you sure it's the phone and not an app?
Click to expand...
Click to collapse
Not pretty sure, but it still occured after countless factory resets, wipe cache, wipe dalvic cache and wipe system via TWRP.

Have you tried a clean install without installing apps to see if you get a reboot to eliminate an app as a possible cause?
Sent from my Nexus 7 using Tapatalk 4

chrisinsocalif said:
Have you tried a clean install without installing apps to see if you get a reboot to eliminate an app as a possible cause?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes I did. I only flashed for example newest PA and their PA Gapps.
So far I resolved it by "downgrading" to a 4.2.2 nightly from carbon. The lags are completly gone. I will stay and wait till carbon has stable 4.3.

why dont people try stock when they are having problems? going from 1 custom rom to the next does not prove it is the phone.
please fastboot flash the stock rom and do not restore any apps/data other than say your google acct

Zepius said:
why dont people try stock when they are having problems? going from 1 custom rom to the next does not prove it is the phone.
please fastboot flash the stock rom and do not restore any apps/data other than say your google acct
Click to expand...
Click to collapse
Already did that.

I am having the same/similar problems with my GNex too. Specifically bullets [1-3] from the original post. I am running unmodified yakjuux and have tried with just my google account with no other apps and the same problem exists.
Mine makes a noticeable "click" sound with a vibration followed by a reboot.
It usually happens during calls and after it boots the phone call log shows no record of the incoming/outgoing call that just happened. Its like a blue screen of death for android!
I have sent the phone back to Samsung's warranty service 4 separate times and each time they reported no trouble found in the completion report. They just factory reset or put an older version of jelly bean back on the phone and send it back to me with some notes of PRL updates and other nonsense to make it seem like they did something to fix it.
Does anyone have any suggestions (logs, adb, etc) how I can help prove to Samsung/service absolute that the phone is a lemon (other than trying to video tape the phone hoping it reboots - because that is the last resort)?
I already escalated to executive customer service and they refused an exchange because the completion reports show no trouble found :crying:
Thx!

well... I also have this problem.
First happened when I flash Cm10.2 nightly (don't remember which one).
Then I flash PA, or whatever... Looks like the random reboot relating to notifications? It's usually happened when whatsapp notification coming in, but not always.
But a few weeks ago I flashed stock ROM rooted (via TWRP, not fastboot).
The problems solved. No random reboots anymore. Then today I tried latest CM10.2, and it happened again... Wonder why... Looks like it's a very rare problems.
Interesting to see someone having the same problem...
Now I want to flash stock ROM via fastboot to check if it'll fix.
Btw, I can flash directly to CM 10.2 from 10.1, can't I? Or I should flash 4.3 via fastboot first?

lonestrider said:
Btw, I can flash directly to CM 10.2 from 10.1, can't I? Or I should flash 4.3 via fastboot first?
Click to expand...
Click to collapse
I believe CM offers an upgrade option somewhere in the system settings. Unless you want to wipe your phone and flash directly to 10.2 in which case I do not think you need to flash stock 4.3 first. Maybe just do a reset within 10.1 before you flash CM10.2 via whatever recovery (clockwork etc) you are using but even that may be unnecessary.
My 1 year warranty expires this month so if I can't manage to get something out of Samsung I am going to play around with flashing stock 4.3 as you suggested. I have tried converting yakjuux to yakju in the past but still saw the problem then which made me revert back to yakjuux so I could send the phone back for service).

[Q] Stuck on bootloader after changing screen density with Rom Toolbox

Hey guys. As the title suggests, I can't boot my Note 2 (sgh-i317). It is stuck on the AT&T logo and while it's stuck there it vibrates slightly every 5-6 seconds. I tried changing my screen density to 240 and it worked for a bit but annoed me. then I went to change it back and got this problem. I accidentally set it to 360 I think though, instead of 320. I have wiped the cache. I have wiped the data. I have installed roms countless times already with Odin. I'd imagine my reset counter is at over 10 just from today.
I've been searching on google and these forums for hours and have seen many suggestions, but none of them have worked. The farthest I have gotten was to get the phone to boot, but once I start going through all the setup stuff I begin getting error popups saying that Touchwiz home has stopped responding. As soon as I push OK the error immediately pops up again. I seriously can not do anything with my phone.
Is there any way to get a stock build.prop file somewhere for this phone, and if so, how would I install it if I can't even boot into the device?
Any help would greatly be appreciated. I have no idea where else to turn here. Thanks!
-Mark

Do you have a backup to restore from recovery ??
If not....then power down the device and remove the SD card and place it into a PC card adapter...
Then download or copy over a suitable rom...
Then place the SD into the phone and boot into recovery...
Fully wipe the device and flash the rom of choice...
Reboot....set....profit....g
Edit:
Are you certain that your power button is not stuck ?
If the method I suggested fails... and rebooting occurs with vibration...then your power button is suspect....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

Thanks. Well I got it to boot finally, however there's been a couple issues since. It's on 4.1.2 right now...
1. Whenever I try to officially update to 4.3 through the settings, it downloads, then when installing it ALWAYS fails at 25%.
2. This is a big issue. My data connectivity is gone. I have no 4g access period. If I'm not using a wifi network, I can't do anything online, period. I've reflashed numerous times, and can't get it to recognize the network. I can make calls just fine, just no data.
I've tried wiping data and going to factory reset, but this doesn't help in any way whatsoever. I've popped out the battery and sim card and reinserted after a few minutes, still to no avail.
The funny thing also, last night my friend, who has the same phone, updated to 4.3 and got the EXACT issues I've been dealing with. The ONLY thing in common is that we have both rooted our phones in the past. When I first got 4.3 it worked fine. It wasn't until I rooted that these issues began. My friend's phone was not rooted, however it had been in the past. I'm thinking that this 4.3 update has an issue with phones that are rooted or have been at some time. I don't know how it can tell, but that's all I can think of. his phone now is also a doorstop, like mine.

K, fixed data connectivity from another thread here. For some reason, even if I wipe my system, it seems to still keep settings intact. In this case, nothing set in APN. Seems the more I try to fix my phone, the more problems show up.

If you updated to official 4.3...then yes ...a whole new host of problems are yours until the devs figure out the locked bootloader and it's knox flag...
Backups won't restore....and so forth...
Read around ....you'll see...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

Rooted, flashed CM11, not receiving texts

Hi all,
I recently rooted my SPH-l710 that was updated to 4.3 using this method: http://honai-android.blogspot.com/2013/11/how-to-root-galaxy-s3-sprint-sph-l710.html
Everything worked well and then I flashed the CM11 ROM (snapshot) and again, everything was working well, I could make calls, send and receive text messages and had mobile data. This afternoon, I found out that I had not been receiving text messages, I could send them and people received them, but when they replied, they never came) through on my end. I rebooted, nothing changed, then I did a factory data reset, again, same issue. Then I flashed this stock ROM (deodexed): http://forum.xda-developers.com/showthread.php?t=2541900 and still had the issue. After installing the stock ROM, I updated the PRL profile and I'm still having the issue. At this point, I have no idea what else I can do the fix this issue and I'm hoping someone here can help me.
Thanks in advance.

Did u try reflashing the modem? If that doesn't work its something on sprints end.
Sent from my SPH-L710 using Tapatalk

I'm shocked that root method even worked for you...did you update your profile as well and then reboot the phone when on stock rom? might wanna get back on the stock rom and try...other things you may wanna try when all else fails, reflash back to completely stock 4.3 which you can do by using my guide in my sig for bricked phones, which you're gonna need to do if you have to go to sprint for it, they won't touch it rooted

I did not try flashing modem, I was under the impression that the modem deals with data and since I had no problems there I didn't bother with it. I did try rebooting after going back to stock rom, but that didn't help. When I first installed cm11 I was having problems with getting Google Voice to work, but I restored the back up a CM 11 when I first installed it and tried google voice again. This time it works and I'm able to send and receive text messages and access voicemail through the app so as long as I don't come across any more issues I'm happy with how it is now. I appreciate all the pointers and if I ever have to go back to stock, I'll refer to this post, thanks.