Related
I bought some nfc tags from the good people over at tagsfordroid.com and took the weekend to program a few of the tags. I thought it would be cool to list some of the programs/actions people have programmed into the tags so others can get some good ideas.
Program: NFC Task Launcher.
Work tag:
~switch tag.
1. Get to work:
Disable wifi
set ringer type vibrate
set brightness to 26
disable bluetooth
2. Leave work:
Enable Wifi
Set Ringer type Normal
Enable Auto-Brightness
Ringer Volume 7
NFC on key chain.
~switch tag.
1. hotspot on:
enable portable hotspot
set brightness to 16
disable wifi
disable bluetooth
2. hotspot off:
disable portable hotspot
enable wifi
enable bluetooth
enable wifi
That's all i have for now. lets see what else everyone is programming into their nfc chips.
i also put an nfc tag by my calendar at my work to pull up my calendar app when i tap my calendar.
Put a tag on my car dock to turn off wifi, turn up ringer and media volume, and start pandora
Have one on my valet at home to turn on wifi and set ringer to vibrate
Sent from my Galaxy Note using xda premium
neevz said:
Put a tag on my car dock to turn off wifi, turn up ringer and media volume, and start pandora
Have one on my valet at home to turn on wifi and set ringer to vibrate
Sent from my Galaxy Note using xda premium
Click to expand...
Click to collapse
cool!
alicechong89 said:
Here is another page for Creative Uses for NFC Tags
http://forum.xda-developers.com/showthread.php?t=1447678&highlight=nfc+tags
Click to expand...
Click to collapse
good article i saw that one when doing a search.
Just thought it would be cool to actually show the action items that were posted to the tags so someone could reproduce it if they thought it was a good idea.
has anyone figured out how to turn on and off an exchange account with NFC? I would love the tag that i use when i leave my office to turn on my exchange account mail so i can get my e-mail while im at home. I dont need it on while im at work because im in front of a computer all day and have access to my e-mail.
chambers7867 said:
has anyone figured out how to turn on and off an exchange account with NFC? I would love the tag that i use when i leave my office to turn on my exchange account mail so i can get my e-mail while im at home. I dont need it on while im at work because im in front of a computer all day and have access to my e-mail.
Click to expand...
Click to collapse
I'm sure that you could set something up using a combination of NFC Task Launcher and Tasker.
Also, while I'm tooling around trying different tags, It seems that placing tags on a metal background causes them to not work... I have had no success placing them on the side of the front door (metal door...) so I can touch it on my way out the door. Also all the desks and everything else for that matter is metal at work (Navy) so placing a "work" tag has proven to be rather difficult to accomplish successfully... May have to try different types of tags to see if there is success with another type.
Ammontj said:
I'm sure that you could set something up using a combination of NFC Task Launcher and Tasker.
Also, while I'm tooling around trying different tags, It seems that placing tags on a metal background causes them to not work... I have had no success placing them on the side of the front door (metal door...) so I can touch it on my way out the door. Also all the desks and everything else for that matter is metal at work (Navy) so placing a "work" tag has proven to be rather difficult to accomplish successfully... May have to try different types of tags to see if there is success with another type.
Click to expand...
Click to collapse
Get metal isolating tags, they have an isolation layer between the IC and the surface you place them on so they work on metal. They are a bit thicker as a result.
place them on so they work on metal
There is a mod in the EVO 4g LTE and HTC one x forums that let's you choose when NFC can be read.
Screen on and unlocked,
Screen on and locked, or
Screed off (obviously locked)
I modded the phone to read tags when the screen is on and even if the phone is still locked. Allowing it to read while the screen is off may be a security risk for some.
Anyway,
On my keychain:
Switcher:
WiFi off, Bluetooth on, volume up, brightness up, latitude check in, plays media player.
This is great because it automatically connects to my car Bluetooth headset and the HTC aux stereoclip so music starts playing through my car speakers wirelessly via swipe of the keychain.
Tap again to disable all these and check in again w latitude.
I also have a separate tag in my car low on the dash to enable GPS and open maps so I don't have to fiddle w my phone througg the settings and open the app drawer to open maps. Makes driving that much safer. Also, I don't always use GPS, so having a separate tag for it from my keychain saves battery by using it only when needed.
Trying to set up a tag to enable WiFi tether for root users and stick it to my laptop/pc for quick swiping and enabling. But that has been tricky as you either have to use tasker or a custom activity in NFC task launcher.
Can't think of any others relevant to my interests. I don't see the need in making 38583983 tags. I definitely use the ones in the car tho.
I may order a wristband and think up something creative for it. Assigning a "sync all" activity would rock for it as I keep auto-syncing on my phone off and only sync email and such when I see fit.
Phew.
Sent from my EVO using XDA
For the two of you who permanent contact?
For example, I have a car dock in my car. My thought was to put the NFC Tag sticker on the back of the dock so when I put my phone in the dock, it would obviously hit the tag and trigger my car settings (wifi off, bluetooth on, etc). Then when I removed the phone from the dock, I'd want it to trigger other settings (bluetooth off, etc).
Since the phone would be constantly against the tag, though, would it be continually triggering switches back and forth? Or would the initial switch trigger upon putting it in the dock, but in order to trigger the 2nd switch upon removal I'd need to move it away from the tag, then tap it back on the tag to initiate another trigger?
Thanks for your help. Trying to fully grasp how the NFC tags work.
hollywoodfrodo said:
For the two of you who permanent contact?
For example, I have a car dock in my car. My thought was to put the NFC Tag sticker on the back of the dock so when I put my phone in the dock, it would obviously hit the tag and trigger my car settings (wifi off, bluetooth on, etc). Then when I removed the phone from the dock, I'd want it to trigger other settings (bluetooth off, etc).
Since the phone would be constantly against the tag, though, would it be continually triggering switches back and forth? Or would the initial switch trigger upon putting it in the dock, but in order to trigger the 2nd switch upon removal I'd need to move it away from the tag, then tap it back on the tag to initiate another trigger?
Thanks for your help. Trying to fully grasp how the NFC tags work.
Click to expand...
Click to collapse
With android there's no indication that a tag has gone out of "range" broadcast to the system. Essentially to get the tag to re-fire you'd need to either move out of range and then back in or turn the screen off (disables NFC) and then back on and unlock the device (restarts NfC and re-reads the tag).
hollywoodfrodo said:
For the two of you who permanent contact?
For example, I have a car dock in my car. My thought was to put the NFC Tag sticker on the back of the dock so when I put my phone in the dock, it would obviously hit the tag and trigger my car settings (wifi off, bluetooth on, etc). Then when I removed the phone from the dock, I'd want it to trigger other settings (bluetooth off, etc).
Since the phone would be constantly against the tag, though, would it be continually triggering switches back and forth? Or would the initial switch trigger upon putting it in the dock, but in order to trigger the 2nd switch upon removal I'd need to move it away from the tag, then tap it back on the tag to initiate another trigger?
Thanks for your help. Trying to fully grasp how the NFC tags work.
Click to expand...
Click to collapse
Two important points
1) NFC doesn't usually work with screen off, so you either need to patched NFC.apk (for example AOKP b40 has this feature) - otherwise, everytime you switch on screen, it would trigger the tag again
2) there really is no way to trigger action on tag removal
I solved this (sort of) by having two tags - one in dock and other one that resets to "default" settings that I swipe after I leave. Not pretty but working...
Or you can set the actions as toggles, so one touch - set for dock mode, and second touch - revert back. But it obviously doesn't work for everything.
Simple solution to that, get an app that detects other hardware features so it can detect when its being moved, ie proximity detection, orientation.
You could also get a fabric nfc tag and sew it into your pocket?
Sent from my GT-I9300 using xda premium
I created a tag that does the following:
->Turns WiFi on
->Waits until I'm connected to my home WiFi connection.
->Sends a WOL packet to my desktop at home
->Wait 20 seconds
->Turn Wifi Off
So when I get home from work I can put my phone down on the tag and my PC will automagically begin booting
For the obvious uses, don't forget night mode - turn ringer off (or on, depending) turn off mobile data, connect to home wifi, etc.
If you just want to mess with tags, go to your local tmo or bestbuy store and pick up a pack of the samsung tectiles. They aren't as cheap as you get online ($15 for 5 vs $1-$2 each) but they are decently large and work just fine. Once you run out you know its time to order a bunch, and you'll probably have a better idea which ones you want to order.
As an old-school embedded hacker, does anyone know of a vendor that sells the DESfire E2V tags with a tag dev kit? I've got a bunch of ideas for cool apps, but I need to be able to modify the OS on the tag. (Take a look at the specs, its pretty neat. up to 32k of storage, with security etc, all running on an old Intel embedded CPU from the 80s.) The only ones I've found so far have the firmware distinctly read-only. I suspect it is using the on-chip ROM, which means it would take impossibly delicate surgery to replace. (There is a pin that toggles between booting on-chip and external.) In theory a dev kit would be set to external and come with a jig or other tool to write it, as well as OS binaries for the standard NFC OS..
As a random easy example of stuff you could do, think of a write-only tag that took vcards for a mailing list (or a roll call) but didn't let anyone but the authorized user read them out again. Right now you'd need to put a full embedded computer behind an active NFC module to do that - a lot more expensive and more failure-prone than a custom tag..
The command IF
neevz said:
Put a tag on my car dock to turn off wifi, turn up ringer and media volume, and start pandora
Have one on my valet at home to turn on wifi and set ringer to vibrate
Sent from my Galaxy Note using xda premium
Click to expand...
Click to collapse
I think that without the command "IF" and "SWITCH" the use of this tags is too easy and useless.
Are these two commands available?
hollywoodfrodo said:
For the two of you who permanent contact?
For example, I have a car dock in my car. My thought was to put the NFC Tag sticker on the back of the dock so when I put my phone in the dock, it would obviously hit the tag and trigger my car settings (wifi off, bluetooth on, etc). Then when I removed the phone from the dock, I'd want it to trigger other settings (bluetooth off, etc).
Click to expand...
Click to collapse
I had problems with double-reading when I'd fumble putting the phone in the car dock. It snaps into place the dock, and it would sometimes read when it got close to the dock, then again when it snapped into the cradle.
I put the tag on my sun visor instead. Sit down, touch the phone to the visor, put it in the car dock. Arrive at work, pull the phone from the dock, touch the visor, and go.
Same thing with my at work tag - I put it on the side of my desk so it wouldn't re-trigger if I removed the phone from my work dock to answer it.
Anything is possible with Tasker
mmameli said:
I think that without the command "IF" and "SWITCH" the use of this tags is too easy and useless.
Are these two commands available?
Click to expand...
Click to collapse
You can definitely do "IF" commands if you use Tasker along with NFC Tags. Since Tasker doesn't natively support NFC, switch isn't a possibility, but since switch is built into many NFC apps, that's an easy one.
I programed my vcard on a tag and put it in my wallet.. Instead of exchanging info if they have an android or blackberry with nfc I just hold my wallet to their phone for a second and it will open the vcard on their phone and ask if they want to save it.
The tag is always in my wallet ready to go.
Surprisingly I've used it more then I thought I would already.. It's kind of fun also and people get a kick out of it.
Sent from my SAMSUNG-SGH-I747 using xda premium
Reposted from Android Guys
http://www.androidguys.com/2012/06/13/samsung-tectiles-could-usher-in-real-demand-for-nfc/
from my Galaxy Nexus using XDA
I don't really understand what makes these better than NFC tags that you can get from Tagstand for much cheaper. Anyone got an answer?
How do you program them? Just wave it over your phone and do it off the phone?
They are normal NFC tags. They have not introduced anything new.
They are programmed using any NFC writing app. Once you have decided what action or content to write, hold the phone over a blank tag under the phone's NFC antenna (on the battery). The rest is quick and automatic.
Apart from them looking good, they are just like any other nfc tag, but more expensive, I wonder what size they are.
Right now I use these token coin type nfc tags cost only USD 0.32 each, the size is only 24byte usable memory, enough for basic toggle, alarm, phone adjustment functions.
They are available in carrier stores so people can get some instant gratification.
Sent from my Galaxy Nexus using XDA
Their app will work with regular NFC tags as well. I played with it for a few minutes. I think I will stick with NFC Task Launcher.
Is Tagstand the cheapest place to get tags at?
i'm not sure what these are even needed for. the only thing i could possibly see using one for myself, is having one in my car to switch on bluetooth.
svtfmook said:
i'm not sure what these are even needed for. the only thing i could possibly see using one for myself, is having one in my car to switch on bluetooth.
Click to expand...
Click to collapse
There are lots of potential uses. The one you mentioned, you could set up a "Do Not Disturb" iOS 6 style function for your bedroom, an airplane mode tag where that may be needed (on my bike when I get to work and put my phone away), etc.
svtfmook said:
i'm not sure what these are even needed for. the only thing i could possibly see using one for myself, is having one in my car to switch on bluetooth.
Click to expand...
Click to collapse
You need to be more creative, that's all. Here are my uses so far:
1) One in the car dock (vzw) that enables GPS, disables Wifi and runs Car Home
2) One in my wallet that runs the Bank of America app
3) One at each entrance to my home (front and back door) that works as a switch. One tap enables wifi, connects to my home network, disables GPS and turns all volumes up, and a second tap turns off wifi and turns on GPS.
4) One on my desk at work that lowers the volume, enables Wifi and runs the clock app
5) One on my external speaker that turns the volume up to 75% and runs Pandora
6) One on a stand in the kitchen that will run a recipe website when I put the Nexus 7 on it (haven't decided which site yet)
Other cool uses I've heard of:
-Putting tags on spices in the kitchen that searches for recipes with each spice when you tap it
-Using it for Geo-Caching, so that when people tap it it automatically notifies you or posts to a website
-Putting them on business cards to share your contact info. Have people tap their phone to your card, rather than having to give them a card they will probably just throw away anyway.
-Bluetooth pairing (I don't have any BT devices currently)
The possibilities are endless, it seems, you just need some inspiration. These Samsung tiles look nice, but they are too expensive. Just get some from Tagstand or a comparable vendor.
Do I understand correctly that all I need are the tags and no usb reader/writers?
ktownhero said:
-Putting tags on spices in the kitchen that searches for recipes with each spice when you tap it
Click to expand...
Click to collapse
Wow, that'll take a hell of a lot of tags for most people, I would think Definitely a cool idea...it'd be nice to use it for inventory, even though that's probably something better suited for RFID tags.
Nope, just tags, nfc enabled phone, and a free app. USB has nothing to do with it.
I have one on the center console of my car. It would s set as a toggle.
Tap when getting in the car: bluetooth on, ringer and notification volume full.
Tap again: Bluetooth off, ringer and notification to vibrate.
I drive a Ford and this allows my phone to automatically connect with the Microsoft Sync system giving me Bluetooth control over calls and music with steering wheel buttons and voice commands. When I'm done in the car my phone goes silent so I'm not disturbed when in meetings.
Sent from my Galaxy Nexus using xda app-developers app
interesting..how long does a tap take to register?
also can tags toggle wifi on/off? or are they just assigned to on or off?
and can a single tag turn wifi on, blue tooth on, max volume, and start a program?
Just a second!
Its up to the app you use to read them.
I personally recommend NFC Retag because it lets you use old, locked tags, has a ton of functionality, more everyday, a writer, and there is a free version!
subvertz said:
Just a second!
Its up to the app you use to read them.
I personally recommend NFC Retag because it lets you use old, locked tags, has a ton of functionality, more everyday, a writer, and there is a free version!
Click to expand...
Click to collapse
awesome! thank you. so I know a tag can be used to turn on an app such as spotify; can it also be written to start a song from the app?
also do you literally mean a second?
Does the writable space really matter on these? What I mean is, can I just buy small 46 byte NFC tags and program them to toggle Tasker profiles?
EDIT: Apparently you can set a url to run any tasker task using this.
https://play.google.com/store/apps/...NvbS5hbGVkdGhvbWFzLnRhc2tlcnVybGxhdW5jaGVyIl0.
I also use NFC Tag in every day use, like changing the setting of my phone when I come in/out of my home (Wifi, sound and cie).
I ordered my tag from TagStand and also use the app they build. This one is free since few weeks.
The tectiles from samsung are pretty expansive and the application they advice isn't as good as NFC task launcher...especially for the commutator mod (a tag can commut between to list of action..)
Hi all,
Ok, so I got a Xperia P that came with two NFC tags... I was playing with them and I have to say that I find them very useful... but I have a question: I use one of the tags for driving, so when I enter in the car and the tag is scanned, both GPS and bluetooth turns on. Also, I also disable screen rotation.
But would like to know if there an easy way to revert all those actions once I get out of the car... that is: to turn off both GPS and bluetooth and enable the automatic screen rotation... any ideas?
Thanks
PS: sorry for my poor English
Get another tag to turn them off.
You could set the tag up asa a switch using nfc task launcher.
Sent from my Iconia A500 using xda premium
I received free tectiles yesterday. So far only used 1 in my car to turn on Bluetooth (connect with car bluetooth for music and handfree phone) and turn off Wifi. Any useful tasks that you guys use or recommend?
♥★★♥ AT&T Galaxy Note II ♡☆☆♡
Im using mine at my bedside to put phone in silent mode and set my alarm. I also put one where I come into the house to turn on wifi and in the car to connect bt and toggle music playback
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I have 3 that I use:
One for the car that turns all my volumes up, turns on bluetooth, gps and wifi and also starts Waze.
One for work that sets all volumes quiet/vibrate, turns off bluetooth, gps and wifi.
One for home that turns all my volumes up, bluetooth off, gps off but wifi on.
My alarm clock is a sleep tracker, and it automatically turns all volumes down, so I don't really need one at my bedside.
Sent from somewhere in the Kessel system using Jedi XP-9 on an AT&T Galaxy Note 2 and Tapatalk.
Thank you for starting this thread ...I realy was interested in using these but havent got arround to getting any yet
Sent from my SGH-I317 using xda premium
jmacdonald19 said:
I have 3 that I use:
One for the car that turns all my volumes up, turns on bluetooth, gps and wifi and also starts Waze.
One for work that sets all volumes quiet/vibrate, turns off bluetooth, gps and wifi.
One for home that turns all my volumes up, bluetooth off, gps off but wifi on.
My alarm clock is a sleep tracker, and it automatically turns all volumes down, so I don't really need one at my bedside.
Sent from somewhere in the Kessel system using Jedi XP-9 on an AT&T Galaxy Note 2 and Tapatalk.
Click to expand...
Click to collapse
How to turn on phone options then an app in one tectile? Your #1
Also I dont have GPS on thee list
♥★★♥ AT&T Galaxy Note II ♡☆☆♡
I put one next to my door so when I leave my house I turn my Swag on.
Wait a minute, I thought once its on its on. Mine never turnes off
Sent from my SGH-I317 using xda premium
Some that I use:
I have 2 in the car:
(I use Tasker and Secure Settings which automatically turn on/off GPS for Torque and Navigation.)
1 - Cycle 1 Turns all volumes up to full, Wifi Off, Data On, Buetooth on, uses tasker to load bluetooth automatic connect to connect to obdii bluetooth device, uses tasker to load Torque, and display Cycle start popup. Cycle 2 Turns off bluetooth, and displays Cycle stop stop popup.
2. Wifi Off, Data On, Turns all volume up to full, loads Navigation, Cycle start popup.
At Work:
I stuck a tag in my ID card holder - Cycle 1 turns off all sounds, Cycle start popup. Cycle 2 turns all sounds up full, Cycle stop popup.
At Home:
I have 2 of these tags - one by door and on by couch - Wifi On, Data off, Bluetooth off, Sounds set for the volumes I prefer, Cycle start popup.
I have 3 tags stuck under overhang on nightstand:
1. Turns various volumes off or lower, bluetooth on, tasker loads bluetooth auto connect to bluetooth radio, cycle start popup
2. Same as #1, but sets alarm to 11 am
3. Same as #1, but sets alarm for 315 am.
By where I charge my headset:
Bluetooth On, tasker loads bluetooth autoconnect to headset, cycle start popup.
Is there any way to get the tags to work while the screen is off?
To control Pandora?
I've been wondering if it would be possible to use NFC tags to control Pandora, by programming a different NFC tag to do each of these things
-Thumb up
-Thumb down
-I'm Tired of This Song
Any ideas?
Phlip00ws6 said:
Is there any way to get the tags to work while the screen is off?
Click to expand...
Click to collapse
I have been looking for this as well.
The Xposed module did not work.
There is a mod by Dr Ketan in the 7100 forums that worked, but gave constant FC's when using stock apps.
so is the verdict that the tectiles are worth it?
imorhi said:
so is the verdict that the tectiles are worth it?
Click to expand...
Click to collapse
thats up to you
sweetboy02125 said:
How to turn on phone options then an app in one tectile? Your #1
Also I dont have GPS on thee list
♥★★♥ AT&T Galaxy Note II ♡☆☆♡
Click to expand...
Click to collapse
Use NFC Launcher. For GPS you'll most likely need to be rooted. I use it for almost exactly the same scenarios as others above posted. Just be aware that there are different limits on how much the tags can store.
funnycreature said:
Use NFC Launcher. For GPS you'll most likely need to be rooted. I use it for almost exactly the same scenarios as others above posted. Just be aware that there are different limits on how much the tags can store.
Click to expand...
Click to collapse
Thank you. NfC launcher has ton more feature than Samsung Tectiles app. I love the 2 tasks feature to save more tags
♡☆♡AT&T Galaxy Note II♥★♥
sweetboy02125 said:
How to turn on phone options then an app in one tectile? Your #1
Also I dont have GPS on thee list
♥★★♥ AT&T Galaxy Note II ♡☆☆♡
Click to expand...
Click to collapse
I use "NFC Task Launcher", available for free in the Play Store. Has many more options than the Sammy app.
Phlip00ws6 said:
Is there any way to get the tags to work while the screen is off?
Click to expand...
Click to collapse
So far I haven't had any luck, with NFC on screen off, and keeping a stable ROM.
-- Note II, TapaTalk II--
I can't come up with anything.
This idea is not entirely mine; I have seen this suggestion somewhere but I have not yet tried to make it happen:
Use an NFC tag as a digital business card. Store your contact information on it and instead of handing your partner a physical card have them swipe it! I'm sure there's a way to do that. If not, just store a link to your social network site of choice (LinkedIn, Facebook [shiver], Google+ or whatever).
I wish there was a way to record a macro. I have an alarm app, and would like to launch the app, and have a macro press here, then wait, then here, then wait, then here.
That would be SO ideal.
Is there an NFC tag writer that will allow a tag to work in proximity? What I'm looking to do is to mount a peel and stick tag to my car's windshield mount. Then when the phone is in the mount, it will trigger the tasks I've programmed. When i remove the phone from the mount, I'd like the phone to toggle back to the way it was before it was placed into the mount.
I thought i had an app a while ago that would allow this, but i can no longer find it.
I personally haven't tried it, but I did a quick search in the play store for " tasker nfc" and this sounds like it may do the trick for you:
NFC Retag freehttps://play.google.com/store/apps/details?id=com.widgapp.NFC_ReTAG_FREE
Sent from my Optimus G Pro using xda app-developers app
CapnPez said:
I personally haven't tried it, but I did a quick search in the play store for " tasker nfc" and this sounds like it may do the trick for you:
NFC Retag freehttps://play.google.com/store/apps/details?id=com.widgapp.NFC_ReTAG_FREE
Sent from my Optimus G Pro using xda app-developers app
Click to expand...
Click to collapse
I have that app and i don't see a proximity setting. BTW, that app allows you to set what i would call macros on your phone. Unlike other NFC apps that write directly to the tag, this one stores the tag's ID on your phone, and then you associate a bunch of commands with that tag ID. So when the phone "sees" the tag, it then executes the stored commands that were stored on the phone, without anything having to be stored on the tag itself.
andygold said:
I have that app and i don't see a proximity setting. BTW, that app allows you to set what i would call macros on your phone. Unlike other NFC apps that write directly to the tag, this one stores the tag's ID on your phone, and then you associate a bunch of commands with that tag ID. So when the phone "sees" the tag, it then executes the stored commands that were stored on the phone, without anything having to be stored on the tag itself.
Click to expand...
Click to collapse
Oh, I see what you mean. I hadn't understood what you meant by the "proximity setting" (I've never used NFC tags). Just to be clear, is the difference in that the profile is changed depending on whether the tag is either in contact or not, i.e. car mode when in contact and then detects the loss of connection when removed and restores to previous profile?
Again, I'm not sure if this helps, but I found this thread from a GS3 forum:
http://forum.xda-developers.com/showthread.php?t=2171952
It sounds more like what you were asking, but I'm not sure if it's only for the GS3.
CapnPez said:
Oh, I see what you mean. I hadn't understood what you meant by the "proximity setting" (I've never used NFC tags). Just to be clear, is the difference in that the profile is changed depending on whether the tag is either in contact or not, i.e. car mode when in contact and then detects the loss of connection when removed and restores to previous profile?
Again, I'm not sure if this helps, but I found this thread from a GS3 forum:
http://forum.xda-developers.com/showthread.php?t=2171952
It sounds more like what you were asking, but I'm not sure if it's only for the GS3.
Click to expand...
Click to collapse
Yeah, I saw that when I searched. That is basically what I'm looking for. The thing is, I could have sworn that at one point I had an app that had proximity built in as standard. Maybe it was just for rooted phones, I don't remember...
I hadn't actually used it back then for proximity, but I thought it was there to be used.
To answer your question, Yes! With proximity, you could set your phone for the normal day to day operation. Then for example, at bed time, you could place your phone into a charging dock that has a peel and stick NFC tag on it's face, and when the phone gets near enough, the tag would activate the tasks you have programmed into the tag. For example, you could turn off WiFi, turn off the ringer, Turn the brightness down to minimum, set a wake alarm/volume/tone, etc... Then, in the morning, when you remove the phone from the dock and it loses proximity with the NFC tag, the tasks will revert to their "daytime" mode, and the brightness will come back up, the WiFi will turn back on, etc...
I realize that all of this can be done by setting the tag to "toggle" functions in that the first swipe of the tag could turn WiFi off, and the next swipe of the same tag would turn it back off, but obviously I don't want to "toggle" by using multiple swipes. I want proximity. (another way would be to use two separate tags near each other and one would be the daytime tag and the other would be for nighttime...)
for the car, I want to turn brightness down a bit (I do most of my driving at night), turn on bluetooth (to sync with my handsfree device), turn WiFi off while driving, start my music app and play a specific playlist, turn the volume up to max (my cassette adapter has very low volume, and the phone automatically lowers the volume when the headphone jack is plugged in), and announce each thing as it is happening (yes that's currently an option)....
i dont use NFC
phamtung8xhd said:
i dont use NFC
Click to expand...
Click to collapse
Thanks for posting your helpful and insightful comments. They truly add to this thread!!
Anyone else have any thoughts as to whether or not an app exists that allows NFC to work with a proximity setting?
Might this help you?
I understand that what you're probably looking for is an app to "program the NFC tag" itself but I hope you find this helpful until you find what you are looking for.
You can try using an app like Llama (the location aware Brazilian camel ...) to set different profiles (with settings and all) for home, work, CAR,etc. Have Llama identify the Areas first (Don't worry about car at this point just tweak the settings for the car profile). In the events tap you can define a condition (NFC tag detected) to an action (activate profile A: Car).
For when you arrive to your destination and want your phone settings to change to suite your new location i.e. activate a different profile, you can create an event -also in the events tab- triggered when the condition (Enter/In Area)is met. Llama will then alter your settings to the ones you have set for the new area you arrived to i.e. change Car profile to Home or Work. The reason why you have to create another event to change profiles after you get out of the car, after NFC tag disconnected, is that Llama can't detect when a certain NFC tag is disconnected -my understanding- so you have to create a new trigger to bring about a new event.
Keep us informed of your progress as I am really interested in Automation myself. Cheers.