Hi all.
I just got a Note 2, N7100, and have a couple of things I'm wondering about.
First some information:
Bootloader Version:
N7100XXUEMK9
PDA Version:
N7100xxuemk9
Csc Version:
N7100XXEMK4.
I saw in the offical thread for 4.4.2, that some one was talking about mk4 and so, which is it?
The bootloader is unlocked, right?
Some thing I need to no about the basebands?
Can I chose a firmware on sammobile and download it from say turkey?
With Best regards Bobin
No need to unlock bootloader or anything like that. Just go to sam mobile and download any ROM for your model (N7100) it doesn't matter which country they all work and have all languages, even though it is best to use as close as possible or exact country because of the MODEM.... Just flash it through ODIN.
If you are downloading from SamMobile, make sure the roms are XXU
XXUE are location ROMs, and they will drain your battery.
Hi All,
Got a small question about upgrading my S4Mini (GT-I9195 LTE) from 4.2.2 to 4.4.2.
At the moment my phone is on stock-rom which is 4.2.2 , when i check for 'updates' it says, 'latest updates already installed'.
Also when connecting to 'Kies' , the program says latest firmware already installed..
However when i check the Sammobile website for the GT-I9195 Model there are newer firmware's showing up , Android 4.4.2, but it depends on the country if the firmware is already at 4.4.2.
For the Netherlands, where i'm from, this one is available :
Model: GT-I9195
Model name: GALAXY S4 mini LTE
Country: Netherlands (Vodafone)
Version: Android 4.4.2
Changelist: 1646188
Build date: Tue, 27 May 2014 08:17:05 +0000
Product Code: VDF
PDA: I9195XXUCNEA
CSC: I9195VFGCNE4
MODEM: I9195XXUCNEA
However, i'm not with Vodafone as a provider, would that be a problem ?
When i check my phone specs, this is what i get:
AP: I9195XXUBNB3
CP: I9195XXUBNB3
CSC: I9195PHNBND1
Can i just install android 4.4.2 from Sammobile without any problem ?
Thanks in advance.
Mascarponi said:
Hi All,
Got a small question about upgrading my S4Mini (GT-I9195 LTE) from 4.2.2 to 4.4.2.
At the moment my phone is on stock-rom which is 4.2.2 , when i check for 'updates' it says, 'latest updates already installed'.
Also when connecting to 'Kies' , the program says latest firmware already installed..
However when i check the Sammobile website for the GT-I9195 Model there are newer firmware's showing up , Android 4.4.2, but it depends on the country if the firmware is already at 4.4.2.
For the Netherlands, where i'm from, this one is available :
Model: GT-I9195
Model name: GALAXY S4 mini LTE
Country: Netherlands (Vodafone)
Version: Android 4.4.2
Changelist: 1646188
Build date: Tue, 27 May 2014 08:17:05 +0000
Product Code: VDF
PDA: I9195XXUCNEA
CSC: I9195VFGCNE4
MODEM: I9195XXUCNEA
However, i'm not with Vodafone as a provider, would that be a problem ?
When i check my phone specs, this is what i get:
AP: I9195XXUBNB3
CP: I9195XXUBNB3
CSC: I9195PHNBND1
Can i just install android 4.4.2 from Sammobile without any problem ?
Thanks in advance.
Click to expand...
Click to collapse
Network/carrier specific firmware may have custom software or setting for the ROM, it better to find some other model that are as close to your phone's spec as possible to avoid any potential problem.
As if your phone has Know, it would trigger Know if you don't update via the official way.
TNCS said:
Network/carrier specific firmware may have custom software or setting for the ROM, it better to find some other model that are as close to your phone's spec as possible to avoid any potential problem.
As if your phone has Know, it would trigger Know if you don't update via the official way.
Click to expand...
Click to collapse
Hi, thanks for your answer.
Knox-flag is already triggered on my phone, but because i had to sent it back to shop for maintenance they reset it back to factory settings (android 4.2.2.)
However, i don't get it the way Samsung is updating the phone's. It's said that 4.4.2 is out for S4Mini , however when i'm searching for my device on Sammobile (I9195XXUBNB3), it still says 4.2.2.
Should I wait with updating, or what else ?
Mascarponi said:
Hi, thanks for your answer.
Knox-flag is already triggered on my phone, but because i had to sent it back to shop for maintenance they reset it back to factory settings (android 4.2.2.)
However, i don't get it the way Samsung is updating the phone's. It's said that 4.4.2 is out for S4Mini , however when i'm searching for my device on Sammobile (I9195XXUBNB3), it still says 4.2.2.
Should I wait with updating, or what else ?
Click to expand...
Click to collapse
That depends entirely on you... If you wish to preserve the warranty and keep the KNOX, than don't. If you can't wait and don't get bother by KNOX or warranty than go for it.
LOL, too tired, I just realize I keep typing KNOX as 'know'...
TNCS said:
That depends entirely on you... If you wish to preserve the warranty and keep the KNOX, than don't. If you can't wait and don't get bother by KNOX or warranty than go for it.
LOL, too tired, I just realize I keep typing KNOX as 'know'...
Click to expand...
Click to collapse
I just typed that my KNOX warranty is already void, it's triggerd 0x1.
I'm now just wondering what the best way is for me to update to stock 4.4.2...i'm confused with al the stock-roms that have 4.4.2 for S4Mini on Sammobile.
Mascarponi said:
I just typed that my KNOX warranty is already void, it's triggerd 0x1.
I'm now just wondering what the best way is for me to update to stock 4.4.2...i'm confused with al the stock-roms that have 4.4.2 for S4Mini on Sammobile.
Click to expand...
Click to collapse
All the ROM listed on Smmmobile is for different region. And I would also expect there won't be a 4.4.2 for your specific phone since you've check via Kies. So you need to find a phone from another region that are same spec as yours - band, function, etc and prefer not a carrier/network model.
Alternatively you can go for the custom KK ROM here.
TNCS said:
All the ROM listed on Smmmobile is for different region. And I would also expect there won't be a 4.4.2 for your specific phone since you've check via Kies. So you need to find a phone from another region that are same spec as yours - band, function, etc and prefer not a carrier/network model.
Alternatively you can go for the custom KK ROM here.
Click to expand...
Click to collapse
O.k..that is right
Hi experts,
I bought a used S9 (SM-G960F) a few months ago from Pakistan. Phone is un-locked and was manufactured in YATELEY, UK. This phone never receives any OTA updates. When I manually check for updates, it says that latest updates have already been installed. I checked on a sammobile, there are quite a few updates available there.
I am not sure what kind of firmware or CSC modifications were done to this device before I bought it (I am sorry but I am still a noob when it comes to android, so please help). I did however check with Phone INFO app, the device is not rooted. In settings it also says that it is official and knox warranty void is 0x0.
Can I flash a firmware for my current country (Pakistan) using Odin?
For example this one: PDA G960FXXU2CSA2 and CSC G960FOXM2CSA2.
Or should I use UK BTU firmware? In that case would I have to unlock the phone by using UK SIM before being able to use it in Pakistan?
My Phone INFO:
Firmware:
Bootloader: G960FXXU2BRGA
PDA: G960FXXU2BRGA
CSC: G960FOXM2BRGA
Baseband: G960FXXU2BRG8CSC code:
Product code: SM-G960FZPAPAK
Original CSC code:
Firmware's CSC code:
Active CSC code: PAK
Available CSC codes:
CSC country: Pakistan / PK
My apologies if my question is very basic or has been answered before. I've been reading forums but found nothing satisfactory. Please guide.
Hi, I'm kind of not sure which android 10 firmware to install on my S9. Bought a fairly used Galaxy S9 SM-G960U with the phone info below
Baseband: G960USQS5CSEB
AP: G960USQS5CSEB
CP: G960USQS5CSEB
Service provider software version: ATT/XAA/ATT
Now the csc code I found is the confusing part, it has
CSC: G960FXSG5CSEB
I already downloaded the unlocked carrier for G960U1, Hoping to flash it back to default.
Can anyone tell me what to do, cos I can't get updates and I want to upgrade the firmware to android 10. Thanks.
Hi,
I am trying to find the correct version of firmware so I can flash it to my unbranded unlocked S20+ (SM-G986U1).
I flashed using Odin the following version:
PDA: G986U1UES1ATG3
CSC: G986U1OYZ1ATG3
downloaded from Sammobile with a date of 8-3-2020 and all it did was ad a purple theme. Still the phone does not show the wifi calling buttons. I had already registered my EMEI with ATT . Am I missing something?
Any help will be greatly appreciated.