Related
Could someone give be a brief run down of the case types and attributes. Things like how thick they are, grip levels, impact protection, etc. I've seen tons of jell cases but not sure how jell compares to silicone or tpu and others.
ok theres Silicone cases which are really grippy often flimsy and fit phones kind of loose, they offer really good protection but get stuck in your pocket and attract a **** load of lint, and also because they dont fit tight they let a lot of lint and dirt in between the case and phone
theres hard plastic cases. they come with the grippy matte(rubbery) like material that a lot of like HTC phone use on their back covers, and they also come painted with all sorts of designs and in solid colors and also come in clear, and transparent colors(like smoke and all the colors of the rainbow), these protect your phone very well but the downfall is dirt and sharp edges.
most of these cases are a bit of a ***** to get on and off and most people leave them on for a long long time only to find out that dirt and lint got in between the case and phone and left horrible rub marks all over the phone, not to mention that while flexing and moving the case tends to scratch the contact points on the phone also.
then theres my favorite Gel/Jelly/Crystal/TPU all of which are the same they are a hard rubberish case that in most cases are easy to remove and put on and fit the phone like a glove (not leaving a lot of room for dust and dirt to get in) not meaning that dirt doesn't get in but its minimal when compared to the other two types of cases. they protect your phone just as well as any other case, have moderate grip (not too grippy like the Silicone and not too little grip like the hard cases) i compare the feel to kind of like the invisible shield "kind of grip" they come in solid colors and in clear tints
Ive bought all of these cases before on multiple phones (G1, Mytouch, Nexus, HD 2) and I have given all of these a chance and no matter how many times i buy a hard case or a silicone case i always end up with a Gel/TPU case, they fit great add the least amount of bulk out of the three and have saved all of my phones from concrete and tile drops multiple times (almost **** my pants when i did it with my Nexus and HD2 though )
with all these cases your going to have to remove the case every once in a while to get the dust out that gets in between the case and phone (unless you like scratches on your phone) thats the common downside to all of these cases but in return you have the security that you wont crack or damage your phone and it will last you
Great write up, thanks.
So is there little difference between the Gel/Jelly/Crystal/TPU? Reason I ask is that I have the t-mo jell case right now and find it makes the phone too big. I am willing to lose some protection to get something a little thinner and did not know if one of the other materials would be a better fit.
I actually found that the T-Mo case is one of the better ones out there. It it not your normal flimsy rubber gel like I had with my HD2, but fits very snuggly and actually adds a little bit of weight to the phone, which makes it feel a little more solid. (once again, coming from an HD2 that was metal).
There are a couple of other threads about the cases, but most of them say the T-mo case is one of the better ones right now. Because the phones are new, there is not too much in the way accessories at this time.
dmtaub said:
I actually found that the T-Mo case is one of the better ones out there. It it not your normal flimsy rubber gel like I had with my HD2, but fits very snuggly and actually adds a little bit of weight to the phone, which makes it feel a little more solid. (once again, coming from an HD2 that was metal).
There are a couple of other threads about the cases, but most of them say the T-mo case is one of the better ones right now. Because the phones are new, there is not too much in the way accessories at this time.
Click to expand...
Click to collapse
that sounds kind of what i am looking for. so do they just have this one at t mobile stores? or are there several that i need to try to see which is which? the one you are describing, its not flimsly like those silicone gels?
also, what screen protector do you reccommend? I know there are other threads, but it sounds like you have tried many.
not trying to thread jack
kboater said:
not trying to thread jack
Click to expand...
Click to collapse
Damn thread jackers... I kid.
Just an FYI and I know lots of popel love the t-mo case. Some pics to show how it increases the size of the phone. You can see a vibrant t-mo case, naked and G1.
i played with the one my tmo store had when i purchased my phone and it seems way more sturdy and better quality than most (I hated the one that came with my HD2 that ***** was flimsy as hell) my only gripe with that case is the fat lip around the edge of the screen, other than that i like it, but TPU cases IMO add the least amount of thickness heres some pics to clear up names between the different type of cases
Heres a Silicone (like the one at the T-Mo store) T-mo's is way better in quality though
http://cgi.ebay.com/BLACK-SILICONE-...ewItem&pt=PDA_Accessories&hash=item43a077b6a9
heres the TPU/Gel/Jelly/Crystal/Hard Rubberish stuff
http://cgi.ebay.com/2-x-TPU-Case-Fi...AU_MobilePhoneAccessories&hash=item3caf486870
http://cgi.ebay.com/1-Silicone-Gel-...t=LH_DefaultDomain_0&var=&hash=item84b70ce076
I think Im about to take a plunge for a Galaxy S version since its been somewhat verified that it fits the Vibrant
Soooooo... theres also hybrid cases lol that mix both TPU and Silicone and that Mix hard Plastic and TPU
Hard Plastic and TPU
http://www.youtube.com/watch?v=3QhIb8OT9zI&feature=channel
Silicone and TPU
http://www.youtube.com/watch?v=sIi9cbm7HxU
to explain the differences in TPU, SILICONE and PLASTIC
TPU means Thermoplastic Urethane/Polyurethane BTW in case anyone was wondering (Sorry i just found out lol)
oh yeah and Silicone means BOOBIES lol
SykesAT said:
Damn thread jackers... I kid.
Just an FYI and I know lots of popel love the t-mo case. Some pics to show how it increases the size of the phone. You can see a vibrant t-mo case, naked and G1.
Click to expand...
Click to collapse
that looks really nice and protective. does look like it adds some size though. I think im going to check it out as I really want something right now and dont want to wait form something to ship from hong kong off ebay.
i know, off topic, but what screen protector are you using in the pics? do you like it? I know in the other thread people recommned the somthing freak, but I dont love the idea of putting water all over my new phone. Most say the protectors from tmobile store are dull and dull down your screen...
kboater said:
that looks really nice and protective. does look like it adds some size though. I think im going to check it out as I really want something right now and dont want to wait form something to ship from hong kong off ebay.
i know, off topic, but what screen protector are you using in the pics? do you like it? I know in the other thread people recommned the somthing freak, but I dont love the idea of putting water all over my new phone. Most say the protectors from tmobile store are dull and dull down your screen...
Click to expand...
Click to collapse
I still have the ones that came on the phone... Still trying to determine what to buy... given myself till the end of the week to decide.
On my G1 I use bodyguardz. I really liked it but two years have passed so I wanted to see if there was anything else that people liked. I would be happy to get bodyguardz again.
Gel/jelly are the same as silicone cases (soft)- not the same as crystal/TPU cases (a bit harder).
-bZj
_____
-sent from my Samsung Vibrant via XDAapp
YOU DONT KNOW ****!!!!!!! lol j/k ok lets just call it TPU and Silicone to keep it simple
just ordered my TPU case with 3 screen protectors (you know since i have 3 screens) and three wipe cloths (in case i forget my hanky?) as you can see in the description its a "Silicone" TPU case, it must be a hybrid case? lol j/k Ebay descriptions misinform everyone
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280537757969&ssPageName=STRK:MEWNX:IT
when i "Google'd" Gel case and Jelly case and clicked on "images" a whole **** load of TPU cases came up BTW
^^^ that's what got me kind of confused cause eBayers can list their products as multiple materials and only when you get in and read the fine print does it clarify what it is exactly. I was about to buy the exact one you bought but the buy it now price jumped to $43 as I was going though the checkout process...
thanks for everyone's help with this. Last night I bought a cheapy (link) to hold me over till there are more options.
finally went to the t moble store and got their case. its the same as the one a few posts back that has pictures. I do like it, but wish it fit just a little more snug. im coming from a mytouch that had a snap on hard shell, so im used to them fitting tight. this will do for now. thanks for the info
now, guess ill order the clearfreaks screen protector from ebay... not thrilled, but dont see to many other "good" options at this point
is it true that the silicon type of cases doesnt allow the heat to dissipate and heats up the device ?
I have been through many cases recently with my x10 including:
Alumor by Capdase
Edge by INCIPIO
Commuter by OtterBox
Silicone/Plastic Skin by (unkown)
Invisible Shield by ZAGG
I found that all of the cases were good in their own ways but had their downsides obviously.
a) Alumor, very snug design it has a great metal backing for excellent protection of the phone and really nice rubber/silicone inside for shock absorption. The rubber around the keys felt a little thick and I found myself often doubling click a button to get my desired keystroke. I found the case a tad bit bulky but obviously spared no cost in the protection department. I really liked the smooth feeling of the metallic backing against my hands. Overall a great case for in-and-out of pocket use. The rubber eventually peels but it does NOT discolour.
b) Edge, extremely tight fitting which leaves little room for screen protectors. But this tight fit ensures a small fitting case making it less cumbersome. Direct access to all of the keys and speakers was a big plus for me, it really made it feel like I didn't even have a case on my phone. A big downside, I thought, was that it covers up the notification light entirely which I consider one of the main reasons why I got an Android phone. Overall great case except for the lack of notification reminders.
c) Commuter, tough like a rock this case hit the ground many times and I was damn glad I had it on because it takes a lot of hits! Again the rubber sheath around the phone left me disgruntled when pressing the volume keys for example. It's a great case for anyone really worried about damaging their wonderful x10. Of course this great prtoection comes at a cost; the Commuter is by far the bulkiest case out there. The rubber innards serve as great protection but I feel like they didn't spend enough time really trying to get a tight fit around the x10. Overall great case for those worry-warts!
d) Silicone/Plastic skin, this was actually my first case and I am not a fan of silicone/plastic cases. I found that they discolour easily, they turn your pockets inside-out when you check your messages, and the protection is minimal. There is just not enough between the phone and the ground I drop it on to really save my phone. I suppose it's better than nothing though. Keys are hard to access through the silicone/plastic even harder than the rubberized bodies on the Alumor and Commuter. Overall it's not a bad alternative if you don't really want a heavy duty case.
e) Invisible Shield, probably a dream come true to anyone who absolutely despises cases. I had a back and front protection on my x10, and I do believe there is an entire body cover package. The invisible shield almost melts to your phone and becomes part of it, the design is fantastic from protection of scratches and nicks. Unfortunetly this isn't a case at all. It's great for scratches, etc. but contributes a minimal amount if you ever drop it on the ground. Zero protection of the corners of the x10. Overall it's the best choice for those who don't want a case.
Alright there's my little rant on cases. Sorry if this has been done over many threads and posts but I thought i might shed some light on the topic. Hope this clears things up for any skeptical people out there.
But the real question is...what's your favourite case?
Leave your awesome responses in the comments and please leave your opinion!
i've got one from unknown brand, hard plastic or something like that, and it's perfect, the buttons are completely accesible because they're not covered, and also it doesn't turn my pockets inside-out. I've also used an invisible shield, which is very good indeed, but the only problem i found was that after some time it starts to get dirty and out of the phone, so i have to remove it and replace with new one. i decided to use the plastic case and the only problem i have is the phone now is not as slim as it is without, like 2mm more than before, but is no problem
Sounds like you've got yourself a great plastic one, very interesting how the buttons are not covered! Maybe ill look around. I'm currently using my Edge and it is great I find. If you ever get the chance or have a little extra money you could try it out.
Sent from my X10i using XDA App
I've got the Otterbox Commuter. I'm not overly worried about breaking my phone but it has saved it on a few occasions. I personally don't find it as bulky as others might but I do agree that the rubbery part could form more nicely to the phone. the top part of the rubber is much looser than I'd like.
@Pawnty, I totally am with you the little slot where the notification light cut out is seems to be incredibly loose. I thought mine was just maybe a deformed one and I got unlucky. Good to know I'm not the only one. Overall though it is a great case IMHO.
Sent from my X10 using XDA App
Also as a recommendation I would try the Incipio Edge its really great, that is if your looking for a switch or just an alternative.
Sent from my X10 using XDA App
i really like the invisible shield! its invisible!
I use back hard mesh cover. 3layered screenguard. GEB leather pouch..... All from ebay
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Would any of these accomodate the larger battery ?
trevagreene said:
Would any of these accomodate the larger battery ?
Click to expand...
Click to collapse
Couldn't get your meaning
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Couldn't get your meaning
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
A case for xperia x10 which has this battery
http://www.mugen-power-batteries.co...ed-replacement-battery-with-battery-door.html
Hi people. Great thread! I've been searching for this for a while.
I'm thinking about buying a case for my x10. I've already dropped it once, resulting in a broken screen, and I'd really like to avoid having that "accident" twice.
Since I'm from Argentina, I would have to buy it online and have it sent, so I'd really like to be sure of what I'm buying.
I've checked all the ones you mentioned, and I'm still trying to decide between an Edge and a Commuter. However, I wanted to ask you (warning: girlie question ahead): aren't there any cases that come with designs? I don't mean colours only, but pictures or logos or something extra? Something to spice things up! I love my x10, but I'd really like to have something more... bazzinga, let's call it!
Thanks for the post, it's been really helpful!
V3RO said:
Hi people. Great thread! I've been searching for this for a while.
I'm thinking about buying a case for my x10. I've already dropped it once, resulting in a broken screen, and I'd really like to avoid having that "accident" twice.
Since I'm from Argentina, I would have to buy it online and have it sent, so I'd really like to be sure of what I'm buying.
I've checked all the ones you mentioned, and I'm still trying to decide between an Edge and a Commuter. However, I wanted to ask you (warning: girlie question ahead): aren't there any cases that come with designs? I don't mean colours only, but pictures or logos or something extra? Something to spice things up! I love my x10, but I'd really like to have something more... bazzinga, let's call it!
Thanks for the post, it's been really helpful!
Click to expand...
Click to collapse
Yes definitely. There's nothing to be ashamed of designs mate. Just search for "designed/stylish pouch or case or cover".
CheersS!
From X10i on ROM : "ThGo2 v9.3"
using XDA premium
Hey guys, I currently have 4 cases, I have two normal, hard plastic cases that cover the whole of the back of my GT-I9100. Only problem is they make the phone feel like a bloody brick, even though they're extremely thin.
Is there a case that is literally like paper? Or something that will be thin enough as to not make my Sgs2 feel huge?
I was thinking of maybe getting something along the lines of: http://www.amazon.com/gp/product/B0...17145&creative=399373&creativeASIN=B005V31MD0 - Has anyone had any experience with these?
Thank you all in advance
You would love this one, so thin you forget it's on. Just cover's the back of the phone, but you also get a screen protector.
http://www.ebay.co.uk/itm/Ultra-Thi...s&hash=item2eb8f1b6b4&clk_rvr_id=306931453559
I just ordered the SGP Invincible shield. I should be getting it in 2-3 weeks, so i could let you know then.
I had an Extreme Ultra-Thin Film Act 3. It's a hard-plastic case but it was reallllly thin and I like it.
Problem is that it doesn't fit with the 2000mAH battery so I've had to remove mine.
It is pretty cheap here, $20 from high rd shop.
in sgp store there are some thin and pretty cases!
okmijnlp said:
Hey guys, I currently have 4 cases, I have two normal, hard plastic cases that cover the whole of the back of my GT-I9100. Only problem is they make the phone feel like a bloody brick, even though they're extremely thin.
Is there a case that is literally like paper? Or something that will be thin enough as to not make my Sgs2 feel huge?
I was thinking of maybe getting something along the lines of: http://www.amazon.com/gp/product/B0...17145&creative=399373&creativeASIN=B005V31MD0 - Has anyone had any experience with these?
Thank you all in advance
Click to expand...
Click to collapse
You could try SGP Silke. Pretty thin I would say.
After getting the Androidfied A2's from Cruzer lite, I didnt think they could top themselves. I was wrong. When I heard about the new cases and saw them, I just couldnt wait. Here is a little review about this series.
The feel of them is different than the A2's but not in a bad way. Feels smooth and higher end, but still TPU. Its not slippery at all. Also, feels just a tiny bit thinner but I know its prob just me excited about the new cases. Also, I noticed new packaging. Thats even better too, lol
The cutouts are still perfect from the A2's. Seems they changed it just a lil bit to help with people with big headphone jacks. I dont use any, so I couldnt test. Unless someone wants to send me a nice pair of headphones
This is their designer series and they are sick. I loved the Androidfied A2's Andy on the back, but these are just so much more, "I LOVE ANDROID" user. Which I do love Android, lol. Its going to be hard to get all of these series as they have so many to chose from
Overall, this is just a tiny bit better than the A2 series. Its very close though. I think what makes it stand out as the winner is cuz of the designs and the feel of the new ones. It is WELL worth the $15 for the case. I think that is why I keep going back to Cruzer lite is because he doesnt over charge for his cases when he knows he could. Thanks again.
Click here for the new series
Pics attached
I ended up getting in on the buy one get a random case free deal and got the Assembling Andy and The Rorschach cases for $15 with free shipping! Great deal because these cases are sweet.
They fit perfectly with or without extended battery. All the cutouts are fine. Usb and headphone jacks fit fine.
The feel is smooth and goes in and out of pocket easily.
Not sure what else to say. They're great and worth it even at full price.
Peronas of Andy
Hey this is Daniel from AndysThreads! Those designs are some of our tshirt designs! So glad you like them
droidmessenger said:
Hey this is Daniel from AndysThreads! Those designs are some of our tshirt designs! So glad you like them
Click to expand...
Click to collapse
I know where I am stopping to get some new threads. Thanks for the heads up.
I have the Original and the A2's. IMHO i don't like these. With a motive printed on the case looks cheap, plus $15 imho is steep. I like unicolor,simple cases. Maybe a good looking 2 tone, but a motive is really hmm... i don't know for me.
Even a TPU rainbow case a la A2's will cut it for me. But there's something about adding it a printed motive in the TPU i dont dig :s
mvtm said:
I have the Original and the A2's. IMHO i don't like these. With a motive printed on the case looks cheap, plus $15 imho is steep. I like unicolor,simple cases. Maybe a good looking 2 tone, but a motive is really hmm... i don't know for me.
Even a TPU rainbow case a la A2's will cut it for me. But there's something about adding it a printed motive in the TPU i dont dig :s
Click to expand...
Click to collapse
I have the original and A2's as well. I can see what you mean, but I like showing off my phone and these cases just do it so much more. The price, if you think about it isnt that bad at all. You see others charging 20-30$ for something like this. But that is just my 2 cents on it. I rushed out and bought all the colors I liked for the A2's and I think with these, I might get 1 or 2 more. But I like how cruzer lite keeps coming out with new designs. I have OCD and cant keep the same case on for more than a few days, so his designs help my problem, lol.
mvtm said:
I have the Original and the A2's. IMHO i don't like these. With a motive printed on the case looks cheap, plus $15 imho is steep. I like unicolor,simple cases. Maybe a good looking 2 tone, but a motive is really hmm... i don't know for me.
Even a TPU rainbow case a la A2's will cut it for me. But there's something about adding it a printed motive in the TPU i dont dig :s
Click to expand...
Click to collapse
I can respect this opinion but just wanted to let people know that in person these cases don't look or feel cheap in the slightest. They are really high quality and, at least with the two that I got, they look great.
I haven't been able to take off the Rorschach case yet... something about the white case on the Gnex just looks awesome to me. The Assembling Andy case hasn't gotten hardly any play yet.
scodoublet said:
I can respect this opinion but just wanted to let people know that in person these cases don't look or feel cheap in the slightest. They are really high quality and, at least with the two that I got, they look great.
I haven't been able to take off the Rorschach case yet... something about the white case on the Gnex just looks awesome to me. The Assembling Andy case hasn't gotten hardly any play yet.
Click to expand...
Click to collapse
Exactly. And I am the same way. I think moving fwd, Im only going to get their white cases. Just makes the phone pop so much more.
Hey guys so I was searching on ebay for some nice cases.
Stumbled upon this one
http://www.ebay.com/itm/Blue-Black-...586830?pt=PDA_Accessories&hash=item4166eb8b0e
Has anyone had any experience with these? Does it look good? I was thinking of ordering one. Let me know what you guys think
Blackleopord187 said:
Hey guys so I was searching on ebay for some nice cases.
Stumbled upon this one
http://www.ebay.com/itm/Blue-Black-...586830?pt=PDA_Accessories&hash=item4166eb8b0e
Has anyone had any experience with these? Does it look good? I was thinking of ordering one. Let me know what you guys think
Click to expand...
Click to collapse
For an inexpensive case I think its fine. The novelty of having a stylus is a bonus. There are other hybrids out there for less if you keep looking. This one while lacking the color you may be interested in, would be another option.
ToStymiedBoar said:
For an inexpensive case I think its fine. The novelty of having a stylus is a bonus. There are other hybrids out there for less if you keep looking. This one while lacking the color you may be interested in, would be another option.
Click to expand...
Click to collapse
I have that case, the paint has already begun chipping off the edges of the grill and there is a crack by the charging port after about a month of use.
i have that style case. i like the bulged up corners which protects great in falls, and the lip is pretty good sized amount so if it falls face down it doesnt really scratch. i put it in my pocket and it doesnt slip off due to the hard case around the rubber. i do recommend it. i got this case to match my grabber blue mustang gt :laugh:
http://www.ebay.com/itm/Blue-TPU-S-...254205?pt=PDA_Accessories&hash=item20cc48757d
I like the Sline design. Makes it feel like it was made for Samsung phones.
ToStymiedBoar said:
For an inexpensive case I think its fine. The novelty of having a stylus is a bonus. There are other hybrids out there for less if you keep looking. This one while lacking the color you may be interested in, would be another option.
Click to expand...
Click to collapse
I actually already have that case! Its really nice. But I was looking for a new one, it has to be blue