Hi
i recently buy an xperia arc (branded and locked bootloader)
directly i debrand/unlock the phone with test point method and omnius software
i installed doomlord kernel and acronium 7
after one week of use i have these symptoms :
- 1% battery (the phone work only when i plug the charger)
- no usb (no fastboot/flashboot mode & sdcard mode)
i installed bacookaze apz for battery but the phone still shutdown when he is not pluged
i've wiped all the cache, but no change
and i really don't want to send the phone to sony!
i really need help!
thx guys
tahartk said:
- 1% battery (the phone work only when i plug the charger)
Click to expand...
Click to collapse
That thing right there,is the 0% battery issue.
U need to flash the respective kernel and then install bazoocaze's apk.
And if fastboot and flashmode are not working..then it would be better to visit any repair shop.
it is possible to put a new kernel in the sdcard an install from it??
tahartk said:
it is possible to put a new kernel in the sdcard an install from it??
Click to expand...
Click to collapse
The easyer way is to flash the new kernel (boot.img) using fastboot:
Code:
fastboot.exe flash boot boot.img
thanks bazoo
i know how to flash but the problem is the phone is recognized as an "unknow device"
usb doesn't work in all mode (fastboot/flashboot/storage)
i already try to reflash it but the device is not recognized
and i have no problems with drivers because i use them last week before the problems comes
For me it looks like damaged USB port... Try other computer mayby
i tried on another pc and it's exactly the same problem
the light is blue when i plug the phone on flash mode
but i can't install the driver
hardware log : error code 43
someone can tell me what is excatly the problem
kernel corrupted?
firmware?
hardware?
KingWickedd said:
That thing right there,is the 0% battery issue.
U need to flash the respective kernel and then install bazoocaze's apk.
And if fastboot and flashmode are not working..then it would be better to visit any repair shop.
Click to expand...
Click to collapse
I don't think so, I had that the first time flashing ROMs. Charging / restarting the phone fixed that problem. Just so you know, 1% is not 0%. Though it might be the 0% battery issue.
Anyways, that does sound like a damaged USB port. Probably better to send it repair.
tahartk said:
i tried on another pc and it's exactly the same problem
the light is blue when i plug the phone on flash mode
but i can't install the driver
hardware log : error code 43
someone can tell me what is excatly the problem
kernel corrupted?
firmware?
hardware?
Click to expand...
Click to collapse
Did you install 'PC Companion' on your PC ??
some news!
after few days of non-using this fu**in phone
i recharged it via pc and the battery logo appears!!
i start it and i seen real 60% battery!
but he don't want to finish to charge now (in off or on mode)
and the battery logo dont appears again in off mode
and the battery logo doesn't appear anymore in off mode
hello guys are in a desperate situation I updated the bootloader (1.23), installed the recovey stock .. the problem and now I do not have enough battery to flash .... if I turn it off and put it in charge turns on by itself and then not charging .... what can I do?
sodocacai said:
hello guys are in a desperate situation I updated the bootloader (1.23), installed the recovey stock .. the problem and now I do not have enough battery to flash .... if I turn it off and put it in charge turns on by itself and then not charging .... what can I do?
Click to expand...
Click to collapse
I connected my phone to another charger, the one without separate USB cable (one piece). It helped in my case.
Hi,
I have a OneX and yesterday totally bricked.
Maximus 4.1.1 JB, Unlocked Bootloader via htc developers and the phone is can't power on.
Befor this problem, i have other problems with charging and wifi.
Yesterday, the wifi is not turning on. Ok, restart. F*ck this s**it Bootloop. OK, stay calm, try to wipe data. Ok, the phone is booting after wipe data. "Change your language", ok, it set and click next. Here is the problem. Ok i lock the screen and lock off. I can't lock off the srceen. Ok, reboot with long pressed power button. The phone thence not booting and not chargeing,
Anyone knows what's the problem?
I can solve this problem or go to gsm service?
solution
I suggest you to pick you're self up,calm down,and slowly update you're HOX onto the lattest and grattes maximus v 6.o.
Before that,make sure that you're phone is fully charged,back up you're old/current rom and continue.
Don't panic,don't *itch and *oon,it's just a ****ing phone
demirisdemir said:
I suggest you to pick you're self up,calm down,and slowly update you're HOX onto the lattest and grattes maximus v 6.o.
Before that,make sure that you're phone is fully charged,back up you're old/current rom and continue.
Don't panic,don't *itch and *oon,it's just a ****ing phone
Click to expand...
Click to collapse
Thanks your letters, and the help, but the phone does not turn on :S
Turn it completely off and let it charge on the wall for a complete day^^ After that please STUDY THE INSTALL GUIDE OF YOUR CHOOSEN ROM PRECISELY AND READ IT AT LEAST 10 TIMES, this is very important. Now you're ready to flash a ROM. If it's still not wokring, you could've a serious problem with your One X. To have a working warranty claim you have to relock your bootloader!!
nitrous² said:
Turn it completely off and let it charge on the wall for a complete day^^ After that please STUDY THE INSTALL GUIDE OF YOUR CHOOSEN ROM PRECISELY AND READ IT AT LEAST 10 TIMES, this is very important. Now you're ready to flash a ROM. If it's still not wokring, you could've a serious problem with your One X. To have a working warranty claim you have to relock your bootloader!!
Click to expand...
Click to collapse
Hm... If i try to charge for a complete day, the phone turning on?
Read my first post... The phone is no charging. No charging from the wall and no charging from USB.
(Sooooorry my bad engilsh :S)
WinnerB0Y said:
Hm... If i try to charge for a complete day, the phone turning on?
Read my first post... The phone is no charging. No charging from the wall and no charging from USB.
(Sooooorry my bad engilsh :S)
Click to expand...
Click to collapse
I've read your first post. You won't see it if it's carging. Try the following; plug your phone to the wall charger for a couple hours and then try to turn it on. If it doesn't turn on, well, thats bad I remember there were some fixes for not charging ONE X's. I'll have a search if charging doesn't work for you.
nitrous² said:
I've read your first post. You won't see it if it's carging. Try the following; plug your phone to the wall charger for a couple hours and then try to turn it on. If it doesn't turn on, well, thats bad I remember there were some fixes for not charging ONE X's. I'll have a search if charging doesn't work for you.
Click to expand...
Click to collapse
Ok. I plugged in the charger isntant to the wall. Really, i won't see the charging led. But i stay on charger a couple of hours. If it doesn't work. It's soooo bad... Motherborad change...
allen175 said:
I had this problem the other day, the battery died before i went to bed, so i plugged it in over night and nothing happened, thought it was the charger, tried a different htc charger and nothing again. So i plugged it into my computer and a few minutes later the light started to flash. I let it flash for a few minutes and unplugged it from the computer and plugged it into a charger and turned it on and it charged up.
Long story short, plug it into your computer for a while then turn it on and charge it normally.
Click to expand...
Click to collapse
hutzdani said:
Happened to me also but when running bricked kernel.
If your not running the stock kernel you need to put the phone on the charger and just wait untill the red led starts to blink ( it can take 5mins for this to happen )
Then allow it to blink for a few mins then power on as normal and remove the charger.
It will boot and moan it has no charge so plug the charger back in once its booted fully, then leave it to charge.
once at 100% reboot and bam your back up and running as normal.
Click to expand...
Click to collapse
Here are some people facing the same problem as you do.
There is a file (script) that can override those stuff,it is meant for fastboot (usb) mode,and on adb you type the commands and the phone starts to charge (slowly) but it is getting the electricity.
Search the threads,and find it,I'm 99% possitive that you're phone is not fully bricked.
Best of luck
So lets give the guy some proper help. Tell me exactly where you are now ? Is the phone charged ? If you have enough power to boot in recovery ? It will charge within recovery so you can leave the phone on and in recovery !
Download a ics rom (like viper x) see if that works oke !
put the phone in fastboot USB mode
Bootloader unlocked - if yes continue
Flash the cwm recovery 5.8.4.0
Fastboot flash recovery recoveryname.img
Go into recovery and do a full wipe of everything. (Factory reset and wipe all caches)
Go to mounts & storage and mount as USB diskdrive
Copy the rom.zip to the phone sd card
Open the rom.zip and copy the boot.img to the fastbootfolder on pc
Put the phone back in fastboot USB mode
Fastboot flash boot boot.img
Fastboot erase cache
Boot back into recovery and flash the rom
After that reboot the phone and it should boot up !
Ahh...
Lesson, this phone IS NOT TURNING ON!
And... unfortunately despite charged few hour... The phone still bricked and i can't turn it on :S
WinnerB0Y said:
Ahh...
Lesson, this phone IS NOT TURNING ON!
And... unfortunately despite charged few hour... The phone still bricked and i can't turn it on :S
Click to expand...
Click to collapse
What you can try is to plug it into a pc .... i saw a post before that someone did that and that he could turn on the phone a few hours later. It's worth the try right !
MarcelHofs said:
What you can try is to plug it into a pc .... i saw a post before that someone did that and that he could turn on the phone a few hours later. It's worth the try right !
Click to expand...
Click to collapse
Thanks, i try it and i write later.
Not working :S
My PC is detecting only the APX hardware. And my phone keep dead.
It's rather hardware issue. Service maybe?
1x, xda premium hd
Apx hardware? I think your memory is corrupt.
Try plugging your phone into charger overnight, then into pc for charge and hold the Vol dwn + pwr for 15 seconds, if the phone doest turn on then you have dead hardware. You can go back to HTC and tell them it stopped working overnight ;D
The good thing in a bricked phone they can't find out whether your bootloader is unlocked or not.
However, some developers are interested in APX mode(because its not accessible in a working phone) and I THINK you can use nvflash (i have no idea how its used or whats its functions are)
APX Mode is when the phone detects very serious hardware damage. In short, you're ****ed.
XxVcVxX said:
APX Mode is when the phone detects very serious hardware damage. In short, you're ****ed.
Click to expand...
Click to collapse
What can I do?
Specifically, what kind of serious hadware damage?
WinnerB0Y said:
What can I do?
Specifically, what kind of serious hadware damage?
Click to expand...
Click to collapse
Go back to the store
MarcelHofs said:
Go back to the store
Click to expand...
Click to collapse
Khm.... I want to go, but, i bought the phone used...
Hey,
since two days i experience some serious problems with my Galaxy W, dont know if its bricked or not.
I have flashed CM 10.1 and the newest Clockworkmod recovery, after that i was able to charge my device and connect the device as mass storage with my laptop. But this was just possible for ONE time.
Since then, i havent been able to charge it nor to connect it with my laptop. Funny thing is that my brother wasnt able to charge the battery in his Galaxy W, but i was able to charge and connect with his battery, but again just for ONE time (too bad that i disconnected before flashing the stock rom). When i try to connect my device with the charger, it just starts CM but wont show the charging symbol nor would charge once loaded CM.
Do you guys have any idea what has happened to my device?
So is there any chance to get the stock recovery and Rom back on my phone if i cant use odin or adb? I dont think that i can send it in for warranty under these conditions.
A solution might be buying a new battery so that i can connect it for one time to odin to flash the stock recovery...
sdfee said:
Hey,
since two days i experience some serious problems with my Galaxy W, dont know if its bricked or not.
I have flashed CM 10.1 and the newest Clockworkmod recovery, after that i was able to charge my device and connect the device as mass storage with my laptop. But this was just possible for ONE time.
Since then, i havent been able to charge it nor to connect it with my laptop. Funny thing is that my brother wasnt able to charge the battery in his Galaxy W, but i was able to charge and connect with his battery, but again just for ONE time (too bad that i disconnected before flashing the stock rom). When i try to connect my device with the charger, it just starts CM but wont show the charging symbol nor would charge once loaded CM.
Do you guys have any idea what has happened to my device?
So is there any chance to get the stock recovery and Rom back on my phone if i cant use odin or adb? I dont think that i can send it in for warranty under these conditions.
A solution might be buying a new battery so that i can connect it for one time to odin to flash the stock recovery...
Click to expand...
Click to collapse
Your usb driver migh got corrupted.
This happened to a friend with his S2 after ubgrading his rom via OTA. He also coudn´t connect via USB nor charge his phone. Funny thing was I could charge his phone at my usb connection, but not with my charger. Lucky him it was Samsung stock rom, so Samsungs Service Center reflashed his rom and so fixed this issue. They also told him his usb drivers got corrupted during the ubdate via OTA.
What you can try is for example to download CM9, put in on your SDCard and flash it from there. If that doesn´t help try reflashing CWM.
So I have had this device since February and finally decided I wanted to Unlock the bootloader, install a custom recovery and get some cool new roms on it. I have the GPE by the way.
Anyways so I unlocked the bootloader and flashed TWRP and then rooted the device by flashing a zip file for root. I assumed the tablet got rooted so I then decided to try the multi window hack and flashed that. Well it caused some apps to corrupt (the phone app in particular) and they would keep crashing preventing me from doing anything. I decided to go back into recovery and try to do a data and cache wipe but that did not help. Eventually I wiped the entire OS which was a mistake. I was still able to get into recovery mode but I have no SD card to load up with a rom to flash and it was late to go buy one. I also tried ADB through the recovery mode that did not seem to work.
I did some searching and found out that I could download the LGMlauncher and it could get me back to stock but to use that I needed my serial number which is on the box (which I had at the office). So I plugged it in (and got the little battery icon) and a few hours ago went to the office to get the box. I tried the LGMlauncher and it keeps on crashing while trying to update and now I am not able to get into recovery mode. What are some other steps I can take to try and recover it?
Thanks.
Edit: I tried the LGMlauncher again and it said my battery was low so I plugged it back in. is there a trick to charging it while it is off? I assume that could be why recovery mode wont work.
Hi, if you have twrp recovery and it is working you can install your missing system by following this post
http://forum.xda-developers.com/showthread.php?p=53744333
Good luck
Sent from my LG-V510 using Tapatalk
schalmers said:
Hi, if you have twrp recovery and it is working you can install your missing system by following this post
http://forum.xda-developers.com/showthread.php?p=53744333
Good luck
Sent from my LG-V510 using Tapatalk
Click to expand...
Click to collapse
Yeah It appears as though the battery was not charging even though I had plugged it in and now it is dead. I cannot seem to get it to go into recovery or anything. Is it safe to say it is bricked?
When my HP Touchpads battery was to low to take a charge from the wall charger, the only way it could get enough charge to be able to use the wall charger was to trickle charge it from my computer usb port for a couple of days.
Jubeldum said:
When my HP Touchpads battery was to low to take a charge from the wall charger, the only way it could get enough charge to be able to use the wall charger was to trickle charge it from my computer usb port for a couple of days.
Click to expand...
Click to collapse
Yeah it has been plugged into my PC for a few days and nothing.