Hi, need help urgently. Tried to root my phone using odin with cf auto root. Im using a SGN2 N7105 anyway. The process freezes or stuck at <id:0/004>cache.img.ext4. The process bar or download bar has stopped mid way, and it has hours. I have tried the whole process again but its still the same. Need help!!!
Have you flashed the correct version for the N7105 wich is http://download.chainfire.eu/255/CF-Root/CF-Auto-Root/CF-Auto-Root-t0lte-gtn7105.zip and do you have usb debugging enabled? Did you close Kies, also in the windows tray manager?
Related
Hello so i recently just got my samsung galaxy s 2 t989 yesterday and i was fiddiling around with it, this morning i tried to root it and when i tried it got stuck in the samsung galaxy s2 logo and it won't load all the way! It can go to download mode and to recovery but i tried reflashing the official 4.1.2 rom but after it restarts odin dosen't recognize it anymore and it just gets stuck on the boot. It was running official 4.1.2 software and it was working fine until i tried to root it! Please help! Any help would be appriciated Thanks!
ommarshakir said:
Hello so i recently just got my samsung galaxy s 2 t989 yesterday and i was fiddiling around with it, this morning i tried to root it and when i tried it got stuck in the samsung galaxy s2 logo and it won't load all the way! It can go to download mode and to recovery but i tried reflashing the official 4.1.2 rom but after it restarts odin dosen't recognize it anymore and it just gets stuck on the boot. It was running official 4.1.2 software and it was working fine until i tried to root it! Please help! Any help would be appriciated Thanks!
Click to expand...
Click to collapse
Help anyone? Please?
OK so what u need to do is this, first if u have any trace of Samsung kies installed on the PC get rid of it, as long as its installed Odin won't see the phone, second Google Samsung t989 USB driver, DL and install that, now go here techerrata.com/browse/twrp2/Hercules and DL twrp2.6.0.4, now connect ur factory USB wire to the PC, with the phone off hold vol+vol- and plug the USB into the phone, that will bring up a warning screen, press continue, now ur in DL mode, open Odin v1.85, in the top box it show have a yellow square with COM and a number of the port ur using, and in the bottom left box it should say added, now click PDA and find the twrp file u downloaded, open that, it should bring u back to Odin, now press start in Odin and let it work for about 30sec, don't touch anything else in Odin at all, the top box will turn blue and say reset followed by turning green and saying pass, now u have twrp installed which should fix ur issues and root the phone, after it boots up reboot into recovery and from recovery reboot the system, it'll tell u the phone isn't fully rooted and ask if u want to install superuser, follow prompts to install and ur good
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
can you still get to download mode?
if so just re-download the firmware and flash with odin
ermmanuel said:
can you still get to download mode?
if so just re-download the firmware and flash with odin
Click to expand...
Click to collapse
the message that said to conect via pc using kies it is downloada mode i tried going to odin again but odin cant detect
woahhh
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
ikhsaricky said:
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
Click to expand...
Click to collapse
can i have your pit file in your SM-T210?
As long as it can enter recovery mode and can be recognized, do a STOCK ROM FLASH (USE THE CLEAN METHOD OF FLASHING). Now attempt to do that flash again..
An image/screenshot of the problem might help us to help you.
aaronjasper49 said:
can i have your pit file in your SM-T210?
Click to expand...
Click to collapse
Aw, im using smt311, but flashing with odinnis the simole way,, did yiu finish it?
same thing happened to my t217s when Samsung didn't do anything for a legit issue with my tablet during an OTA update and stated that it was rooted (it has been stock since out of the box). after many attempts (didn't have another computer available) i switched to a different usb port and got it flashed just fine.
hi can i ask something it happened i flash samsung j1 then suddenly in 90percent was cut and i cant go back to download mode. and the phone turn black and cant connect to pc. Can Please can you help me?
I had a similar situation with a Galaxy SM-T113 here in Canada. I was hammering away at it for about 4 days with no luck. All i got was the "use Kies" to fix it message. Kies would not detect my phone though. Anyway what i did that worked was in part already tried earlier.. I already tried for example using a different cable and a different port. And i always got a failure with Odin and attempting the stock firmware flash.
So what did i do ?
I unplugged my Gamepad i keep plugged in 24/7 thinking maybe i had too many USB devices hogging USB port bandwidth.. maybe that was it I don't know.. I also uninstalled Kies but this time i said yes to installing the unified driver it asks you about. I also changed to yet another USB port.
It was working fine before hand.
I was trying to flash the firmware simply to reset the thing like i have done on countless other devices over the years.
I am not new to this sort of thing and was rather surprised to see Odin fail.
So who knows maybe my post here will help others.
I feel relieved i did not brick a perfectly good device. LOL
please read carefully ..
I have note 2 gt-n7100 when I bought it it was running android 4.1.2 after a few weeks I updated it to 4.3 but I noticed that the download mode screen changed and additional details appeared like knox an warranty void which wasn't apear before but the strange thing is that the old download mode start to appear again when I use kies but it is use less and not download any thing seems like I have 2 download modes but I can't maje any of them default or delete the other altough when I press home and power and volume down the new one always appear.. I rooted my devise using odin and there was no problem then the new update of kitkat 4.4.2 comes to france I couldn't wait then i downloaded it flashing it using odin again and rooted it with no problrm via odin and philz touch .. a few weeks i tried to connect it to odin to downgrade it to 4.3 again but it didn't appear in odin ! i thought that it could be somthing in the new software like they have stoped flash player of working so i thought that they possible avoid using odin or someting like that .. i tried using mobile odin buy chain fire and i flashed 4.3 again but the root permission was lost .. i tried again to connect it with odin but nothing changed at all i tried every possible way to use odin again installing the new drivers required and the latest version of odin and using another pc and cables altough all of them was working with no problem after 4.3 version .. tried every possible one clike root app like framaroot and etc .. tried the adb mode via my pc and it said kernel is patched I updated it to 4.4.2 again via the built in software update and nothing changed .. any way to solve that re root my mobile again !!! .. it seems like a hopeless case :'( help me please and for any additional details I will reply immediately .. thx in advance and sorry for my bad english
hi.i need some help maybe someone can help me out.. i got a m919 s4 and i was having problems with the wifi running 4.4.2. phone was rooted. so i try installing stock rom on phone to remove the root access and maybe that would fix the wifi issue.. so i try loading the same firmware using odin 3.09 but it gave me error on write..i disconnected phone and turn it on but the phone gave me a screen telling me to connect the phone to kies for emergency recovery. i try doing that but kies doesnt see the phone..and everytime i try write thru odin i get failed to write.. any ideas....
ps i can only get into download mode and the screen telling me to connect to kies for recovery nothing else
os 4.4.2
nevermind guy finally found the problem.. i needed to use a older odin for it to work thanx anyway
Hey I currently have the Galaxy Note 8.0 GT-N5100,
when i connect it to my pc it starts up and stops at the recovery screen. But it is flashing, the screen is always turning on and off.
What does that mean, and how can i fix it? I tried to reflash the firmware with kies but it doesn't recognize the phone. What is the easiest way to get the note back to work?
Thanks for your help