Cant use Internet Pass-Through - HTC One X

Since installing JB (Revolution HD 15), when I switch to internet pass through mode, my MTP USB Device always fails to install.
Mounting as a hard drive works fine.
I've upgraded drivers, sync manager etc.

bump

Hi
I have the same issue.
Have you found a solution yet?

Related

usb tethering on windows7

Hi,
i am not able to tether my desire on windows7 machine, it does nicely on windows xp. I have installed htc sync but with no help. Any idea as to what is missing.
wlan tether or usb tether is not working?
me too..My computer's operating system is Window 7
I'm using hTC Desire...it was working with original ROM
but after I flashed to CM7 RC2 and GingerVillain ROM(both are 2.3.3), I found USB tethering unable to work, when I ticked it then it will auto untick the box
someone know how to solve it?
It's quite obvious the problem lies with gingerbread...so either revert back to froyo...or try uninstalling the USB drivers and downloading the latest ones (they come with HTC sync from HTC.com)
Gingerbread isn't really (officially) out, soooo...that's my theory at least
usb tether dont even work on XP with the latest android usb driver revision

[Q] USB Tethering drivers required, WinXP & CM7

Hi all,
I'm after a little help that I simply cannot find anywhere else... all other routes/searches have led me here so i'm afraid my first post is a question that hopefully someone here can help me with.
So... here goes...
I have a UK HTC Desire, running CM7.0.3.
I would like to connect it to my work laptop running Windows XP via the USB cable so that the laptop can use with the phones WiFi connection or the data connection.
The laptop has WiFi, but it's disabled via the bios and I don't have the password.
With the stock ROM, I connected the phone, put into tethering mode, installed a driver (googled off the www) and it all worked wonderfully.
With CM7 installed, the original drivers don't work and I cannot find anywhere new drivers that do.
I removed all drivers to start again on the laptop, so when i plug the phone in, the first it detects is the Android Phone and wants a driver for "My HTC". Everything I've thrown at it, windows says is incorrect
I installed the Android SDK, but my work proxy wont allow it to connect to their servers (it tries to do this automatically when searching for the usb drivers) for any drivers (which was one suggestion that Google informed me about).
I went to the HTC website to look for drivers, but they seem to have forgotten that they built the Desire completely (another fruitless Google search result).
Please can someone offer some suggestions on where I can get the drivers for USB tethering for the desire running CM7?
Much appreciated, thank you.
Regards
JBM2k.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
JustBiteMe2k said:
Hi all,
I'm after a little help that I simply cannot find anywhere else... all other routes/searches have led me here so i'm afraid my first post is a question that hopefully someone here can help me with.
So... here goes...
I have a UK HTC Desire, running CM7.0.3.
I would like to connect it to my work laptop running Windows XP via the USB cable so that the laptop can use with the phones WiFi connection or the data connection.
The laptop has WiFi, but it's disabled via the bios and I don't have the password.
With the stock ROM, I connected the phone, put into tethering mode, installed a driver (googled off the www) and it all worked wonderfully.
With CM7 installed, the original drivers don't work and I cannot find anywhere new drivers that do.
I removed all drivers to start again on the laptop, so when i plug the phone in, the first it detects is the Android Phone and wants a driver for "My HTC". Everything I've thrown at it, windows says is incorrect
I installed the Android SDK, but my work proxy wont allow it to connect to their servers (it tries to do this automatically when searching for the usb drivers) for any drivers (which was one suggestion that Google informed me about).
I went to the HTC website to look for drivers, but they seem to have forgotten that they built the Desire completely (another fruitless Google search result).
Please can someone offer some suggestions on where I can get the drivers for USB tethering for the desire running CM7?
Much appreciated, thank you.
Regards
JBM2k.
Click to expand...
Click to collapse
Same issues here. Tried the SDK Drivers too, didn't work.
Strange thing is, normal USB connection is ok with the old htc driver, the issues come up when tethering option is activated: it switches to another driver (Android Phone).
Try upgrading things...ur BIOS, ur Windows etc...

[Q] Can't get a USB connection, can I just use Kies?

I've never been able to get the USB to work. It always fails to install the MTP drivers. I removed all of the old drivers from my old Galaxy S1, used ccleaner to clean the registry, and despite multiple attempts have been unable to get that pesky MTP driver to install. So my question, do I really need that or can I just use Kies Air to transfer files around for installing roms, or does the GS3 need an actual direct connection?
aclays said:
I've never been able to get the USB to work. It always fails to install the MTP drivers. I removed all of the old drivers from my old Galaxy S1, used ccleaner to clean the registry, and despite multiple attempts have been unable to get that pesky MTP driver to install. So my question, do I really need that or can I just use Kies Air to transfer files around for installing roms, or does the GS3 need an actual direct connection?
Click to expand...
Click to collapse
No need for direct connection. I transfer files to and from my mobile over my wifi network just fine. In my case I use AirDroid, it has a nice UI and is free.
Other option would be to download the drivers directly from Samsung, link found here.
MTP is know to give a few head aches, I have to switch to PTP then to MTP for my laptop to pick up the MTP :/
Yes you can use Keis Air for transferring files.
The phone needs to be connected to the same router as the desktop/laptop you plan on using. Or a direct connection.
The interface is very limited though. Getting it to work properly over MTP would be a better option.
Which cable do you use to connect the S3 to the computer? I had to use the samsung one, else wouldnt work.
Also which drivers? I may have let Windows 7 discover and download its own drivers. That might have worked for me.
I can now use the phone as if it were a usb drive, but over MTP mode.

[Q] HTC DESIRE 816 USB driver problem

Hi, My HTC Desire 816 is about 2 weeks old. I've had problems connecting the device to my personal computer (running Windows 7). I've reinstalled HTC Sync Manager several times, turned on USB Debugging, and even switched cables and ports but to no avail. When I try to update the driver, Windows faces an error saying it's unauthorized to install the driver for the device. However, the device connects perfectly to my office laptop also running Windows 7. I am able to transfer files on that system but not on my personal computer. The HTC website also has been of no help, except for asking to reinstall HTC Sync Manager. Please help. Thank You.
me too, need help
Tethering & Internet Pass Through
I have installed the latest version of HTC Sync Manager for my Desire 816 on Windows 7 and tried it on Windows XP as well.
When I connect my device for the first time after that,the drivers install automatically.
My system is recognizing the phone as a mass storage device.
But when I select the 'Internet pass through' connection type, it doesnt connect and after some time gives the error as
"Either you dont have the latest HTC drivers or ,,,,,,,,,,,,,,please get latest drivers by intalling latest HTC sync manger from the website"
I have tried to uninstall and re-install the HTC sync manager several times but had no success with Internet Pass through.
Might be the issue with the drivers,cant understand the reason.
Can anyone help me out with this.
I have also the same problem.
StarKnife said:
Hi, My HTC Desire 816 is about 2 weeks old. I've had problems connecting the device to my personal computer (running Windows 7). I've reinstalled HTC Sync Manager several times, turned on USB Debugging, and even switched cables and ports but to no avail. When I try to update the driver, Windows faces an error saying it's unauthorized to install the driver for the device. However, the device connects perfectly to my office laptop also running Windows 7. I am able to transfer files on that system but not on my personal computer. The HTC website also has been of no help, except for asking to reinstall HTC Sync Manager. Please help. Thank You.
Click to expand...
Click to collapse
I am pretty sure that you guys have already tried all those, but just wanted to remind you all again as a benefit of doubt. HTC sync manager will install the required drivers usually, but in some cases due to firewall or any antivirus systems within our computer, only few files will get installed and other will get blocked. The best way to tackle this problem is to follow the below steps
1. Uninstall the HTC related drivers if installed partially previously.
2. Reboot the system - which is must
3. Then turn of your firewall or internet security or antivirus on your computer for 10 min or more
4. Connect the HTC 816 to computer using the different USB port that is not used before. (Every new USB port needs installing drivers. So hopefully this might help)
5. Install the HTC sync manager
Hopefully it should recognise. If not, try following the same steps with different USB cable.
Hit thanks if I helped you so that I will know the above steps worked for you guys too as they did work for me personally. All the best.

Is there a fix for the MCP connection fail thing?

Hi,
I'm having some issues where the MTP driver fails to load. Tried all the obvious stuff and did a lot of reading of forums and stuff but can't find a fix. Could anyone help me to fix it please?
Here's what hardware I have and what I've tried so far:
Tab Pro 8.4 16gb wifi UK model, rooted.
Connected via cable to Dell XPS 17, latest USB drivers installed, win 7 x64.
First of all, I enabled USB debugging and windows installed drivers for all except MTP.
Tried installing the Samsung driver package, same problem. Uninstalled at present.
Installed kies, didn't work, wouldn't even connect to the device. Uninstalled.
Followed the instructions on the wiki but the suite software installs the driver succesfully but then windows won't accept the driver. Tried the workarounds in the wiki but still no luck.
Tried rebooting the tablet and leaving the cable connected.
Tried wiping the cache.
Tried restarting both the tablet and laptop after reinstalling software and drivers, still no luck.
Found several workarounds on my travels, one was a command line for windows to add to usergroup ( it's on the laptop downstairs, will add it to the post tomorrow).
One post said to change a registry entry...really? Tried that, and another registry trick, but still no.
Using the same laptop, I had similar problems trying to flash a custom rom onto an s4, but the CM installer worked first time. I've done a fresh install of win 7 since then.
Can anyone shed any light on this for me please? Is there any kind of workaround? Running out of ideas!
Thanks
Fixed this, well, kind of. Here's a quick rundown of what I did, for people like me who are struggling with connection problems.
I thought I had tried everything, was going to dump the whole thing and then remembered that I'd fixed some previous USB problems (sound card) by doing a clean boot.
First, remove Kies.
The only other thing that is required are the samsung mobile drivers from their website. I tried with and without and this would only work with them installed.
Restart your tablet, make sure MTP is selected.
You can find out how to do a clean boot for you version of windows here.
Leave your device connected via USB cable. Once you have clean booted into windows, windows will attempt to install the drivers from windows update, let it do this. It can take a minute or two to complete. You should then see a green tick in the notification area rather than the dreaded red cross.
If, for some reason, the driver doesn't install first time, you can unplug and then plug back in the USB cable and this should do the trick.
What I did find, is that the connection wasn't consistent, I could restart either my laptop or tablet and then it wouldn't connect, so I'd have to go through the above process again to get it to connect.
Doing this allowed me to flash the Clockworkmod recovery with odin 3.09, but for whatever reason, I was still unable to use the recommended Eimdall suite to flash cyanogenmod.
In the end, I downloaded the CM11 zip file to my tablet (via http) and then used ES file manager to move it to the SDCard root and then clockworkmod picked it up from there.
Also, once CM was installed, there were no connection problems at all, as far as I can see.
Hopefully this will help others in the same predicament.

Categories

Resources