Develop Bugs

[Q] Help! Stuck on white HTC screen after installing root!

So I installed CWM recovery, and installed the rmk root setup zip. Before I installed it, I wiped the cache but not the Dalvik cache. When I rebooted, it hung on the white HTC screen. I went back into recovery and wiped dalvik cache, cache and even data and settings, then installed the zip again and it still hangs. can somebody help me? Honestly at this point I just want to be able to use my phone again.
Thanks in advance

Did you install the root zip that included the froyo stock kernel? I made the same mistake. Just have to adb a compatible 2.3 kernel into your sdcard and flash it.
Sent from my Incredible 2 using XDA App

http://forum.xda-developers.com/showthread.php?t=1160745
i'm pretty sure this is the zip i used. if thats what you're talking about, then how do I fix it?

You cant use that .zip because it uses the Froyo kernal which is incompatible. You have to push jcase's GB kernal to your sd card then flash that.

I'm sorry for the stupid question, and thank you so much for your help, but where can i find that? and what commands do I use to push the kernel to the phone?

Have no fear as long as you can get into CWM then you are still good.
How long does it hang, sometimes it takes a few minutes for that HTC screen to go away, especially if you wiped data. you might want to wait, a little bit.
You can always download a stock rom(jcase plainjane rom), get into CWM, and then mount your USB to be able to install from your computer, and then flash the new rom.
Did you make a backup before you flashed the update, you can always recover.

DalekCaan said:
I'm sorry for the stupid question, and thank you so much for your help, but where can i find that? and what commands do I use to push the kernel to the phone?
Click to expand...
Click to collapse
If you can get into CWM, look for Mounts/Storage and mount your USB so you can access your Phones SD card from your computer, then transfer the file from your computer to your phone.
or use adb if you are familiar with that.

you did get S-Off first right?

yes i have s-off, no i did not make a recovery (i wasnt aware i could do that before i rooted but i have come to terms with the fact that I lost a bunch of data).
okay, so i put the file on my sd card and... what? is it a zip file? where can i find it?
just so i understand, once I get this rooted kernel, i will be rooted and i will be able to install the cwm app and go from there?

and i don't necessarily want the stock rooted... i guess i could go from there but for right now could i download a 2.3 kernel with a different rom? are kernels bundled with roms or do i need to install them separately?
sorry, i'm a new user so i keep having to wait 5 minutes...

Kernels, can be rom specific or bundled but currently for the dinc2 there arent a lot so make sure it doesnt say it belongs to a specific rom otherwise it might not work.
Jcase has a stock kernel and rom he put up a while back for gingerbread.
They will be a .zip file and all you have to do is using recovery choose zip file and run it, since you already deleted everything.
When you install a rom, it will add su and busybox, and root your phone. You need your phone rooted to be able to do anything, after S-off.
if you have recovery installed then you have CWM and really what you want is Rom Manager to do backups.

can i flash the tiamat kernel? do i still have an OS? will that fix things?

DalekCaan said:
can i flash the tiamat kernel? do i still have an OS? will that fix things?
Click to expand...
Click to collapse
tiamat kernel is an AOSP kernel. for CM7/MIUI/OM(F)GB
you'll get bootloops if you flash it on a sense rom.

so should i flash that, then flash something like MIUI? can i do that? and do i have to wipe data/cache/dalvik before the kernel AND before i install MIUI?
thanks

DalekCaan said:
so should i flash that, then flash something like MIUI? can i do that? and do i have to wipe data/cache/dalvik before the kernel AND before i install MIUI?
thanks
Click to expand...
Click to collapse
I would get a Rom working first which is your OS, the kernel jut says how it should run.

but apparently i have a froyo kernel installed right now? how should I fix that?

http://forum.xda-developers.com/showthread.php?t=1191836
here is a link for a gingerbread kernel...try that first

dj_wires said:
http://forum.xda-developers.com/showthread.php?t=1191836
here is a link for a gingerbread kernel...try that first
Click to expand...
Click to collapse
If you install a new rom, it will overwrite whatever kernel you have, so you might just want to install this....
http://forum.xda-developers.com/showthread.php?t=1161411
this is the first gingerbread rom i used...not a lot to it.

I'll try that thank you so much! i just have to go to "install zip from sd card" once i put it on my sd card?

DalekCaan said:
I'll try that thank you so much! i just have to go to "install zip from sd card" once i put it on my sd card?
Click to expand...
Click to collapse
Yup!
Good Luck!

Can someone answer a question regarding jellybean?

I installed this yesterday jb-takju.zip. I was originally on cm9 rc1. In the process I managed to wipe my entire directory, nandroid backups included. I tried to get cwm back via fastboot and was able to then flashed CWM-SuperSU-v0.89.zip to get root right after. Now besides losing all my data, I cant keep the cwm touch recovery on, it keeps going back to the default recovery screen when I try to boot into recovery from rom manager. So at this point I'm baffled, not used to not have an sd card.
How can I have avoided this? How does titanium backup work with dropbox I couldnt get that set up. Also should I be flashing a different version of JB?

I didn't loose all any data on sdcard but was losing car. I ended up using the xbigie version. That was decided,rooted....
Sent from my Galaxy Nexus using xda premium

You must mean the virtual sdcard which I dont even see in my directories.

Can anyone tell me why I keep losing cwm touch recovery at least? lol
Should I just flash a different jellybean rom .zip?

SysAdmNj said:
Can anyone tell me why I keep losing cwm touch recovery at least? lol
Should I just flash a different jellybean rom .zip?
Click to expand...
Click to collapse
You can stay with CyanogenMod 9 RC1 and wait for the official release of JB!! What about that ???
:cyclops:

carloscarvalho said:
You can stay with CyanogenMod 9 RC1 and wait for the official release of JB!! What about that ???
:cyclops:
Click to expand...
Click to collapse
Not acceptable, I already lost all my nandroid backups so I might as well use available JBs and start fresh

You're losing your cust recovery because there is a script you need to delete that auto installs default recovery on every reboot. It should be named the same as it was in ICS when the phone first came out. I'm look for the exact name now unless someone beats me to it.
Edit: /system/recovery-from-boot.p is the file. Rename or delete. Then it should stop reloading stock recovery. Just make sure you have CWM installed already and you're good to go.

[Q] How to go from 4.0.3 Jedi Mind Trick to Cyanogenmod 10.0.0 Stable Release

Hello all just bought a new Samsung Galaxy SII from craigslist already rooted with 4.0.3 Jedi Mind Trick. After reading for what seems 4-5 hours i have been trying to put together how to properly without bricking switching it to 10.0.0 Stable as i use to use Cyanogenmod 2-3 years ago on my devices. Seem alot of things have changed and there is a cluster**** of stuff out there now. If you could direct me to a how to or show me how to do it i would greatly appreciate it!
Thanks all!

Assuming you have nothing personal to back up that you can't just download from google play or your google account again: download cyanogen 10 and it's gapps. reboot into recovery mode. factory reset, wipe data, wipe system, wipe cache, wipe dalvik. pick the install zip from sd card or so option, browse to cyanogen, then install gapps the same way. wipe dalvik again and reboot.

I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.

Alawishis said:
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Click to expand...
Click to collapse
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?

melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.

new ion? said:
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
Click to expand...
Click to collapse
trying to look up how to do that now .... Searching the forum now... Might you be able to tell me real quick how? I already Downloaded the 5.2 file they suggest to use but can't find a working toturial that is just for flashing the cwm.

melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.

arcsine said:
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
Click to expand...
Click to collapse
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-

melvinator said:
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
Click to expand...
Click to collapse
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium

new ion? said:
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.

melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
Go back, format system, and then reinstall.
Sent from my SAMSUNG-SGH-T989 using xda premium

Update your recovery to twrp or cwm 6+ and don't use dark side scripts
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Please excuse my harshness but this is not as hard as many make it seem. I would say if it takes you more than a couple attempts maybe it is just not for you. I only say this because I would hate to see you mess up your phone. Now if you think a bootloop is a brick then we need to do things at a slower pace with you.
If you already have your phone rooted then
1.download goomanager from the playstore and then
2.open it up and allow it to grant permission from CM
3.hit menu button while goo manager is open
4.click on install OpenRecoveryScript
5.let it do its thing
6.reboot into your new TWRP recovery
7.Wipe/Data Factory Reset
8.Flash Rom
9.Flash Gapps
10.Reboot
You can throw in a backup of files somewhere in there if you like.... Your choice

melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
I had a bootloop when using CWM v6.0.1.5. So a friend of mine told me he had success with CWM v6.0.1.5 Touch. So I switched to the touch recovery and... SUCCESS.
Here's the link to CWM touch and non-touch:
http://forum.xda-developers.com/showthread.php?t=1893464

A boot loop could mean a bad download or bad flash but it is most definitely NOT a bricked device. All you needed to do was get a fresh download and move it to your SD card by mounting it in recovery. Then, wipe EVERYTHING but the SD. EVERYTHING. Then flash the ROM, Gapps and whatever radio. I go from CM to AOKP to other random TW roms all the time and never have issues.

The 2 best recoveries are twrp or my favorite because I'm used to it is cwm 6.0.1.5. http://forum.xda-developers.com/showthread.php?t=1844637
Also if your phone boot loops don't freak out' just either reboot to see if that works out first and if not reboot into recovery. Also with these new recoveries do not use dark side scripts.
Factory reset
Format system
Format cache
Format data
Flash ROM
Flash gapps
Reboot and enjoy
Sent from my SAMSUNG-SGH-T989 using xda premium

This did it!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Sorry for the necro on the thread, but I didn't want it to be stated I didn't look around some either.
I am going from JMT to CM and want to make sure it's as seamless as possible. I use CWM and usually usually use darkside complete wipes, but I read in a previous post not to use darkside. Is there a reason for this? I can't see why this wouldn't work as it's just a wipe.
Also I use Titanium Backup. Is it possible to backup my apps and data and restore them since its not TW any longer? I want to be able to restore as much of my data as possible and make sure I don't lose it.
P.S. - If thread necroing is not appreciated, I apologize.

Ready to flash from stock for 1st time but few questions.

Hey everybody.
I used to flash all sorts of roms on my old galaxy vibrant but I bought a new t989 a few months ago and I want to go to a custom from the stock tmob bloatware infested ICS. I already rooted via odin and installed clockwork recovery, which comes up just fine with the usual volume and power combo so i'm good there.
My question is should I flash my first rom (probably jedi mind trick 5 or x1,or if anyone knows a daily driver ready jelly bean??)
via clockwork mod like on my vibrant? or do I use twrp which I also have via goo manager? I prefer cwm because I am familiar with how to wipe cache, reset and flash with it but I can't figure out why some mods recommend one or the other.
Also,
I keep seeing some roms that come with a radio zip and was wondering if all roms require this or is it just certain roms?
Thanks in advance for any help. I just don't want to wreck my phone the first time. Remember, I've flashed a million times on my vibrant but never on my t989 so any pointers or heads up would be appreciated.

Get darkside wipe scripts (both wipe cache and super wipe)
Go ahead with the Jedi X1 ROM its very stable and fast as hell
But if you want Jelly Bean I recommend Galaxy SBean v8 or Liquidsmooth rc8 they're the most stable JB ROMs from what I experienced
Remember to always wipe dalvic cache and fix permissions (darkside cache wipe) after flashing a new ROM
After you flash your ROM and Gapps then boot that's when you can flash kernels, mods, and apk's so it would have a lesser chance of a soft brick
Happy Flashing!
Sent from my SGH-T989 using xda app-developers app

arthurgreeeen said:
Get darkside wipe scripts (both wipe cache and super wipe)
Go ahead with the Jedi X1 ROM its very stable and fast as hell
But if you want Jelly Bean I recommend Galaxy SBean v8 or Liquidsmooth rc8 they're the most stable JB ROMs from what I experienced
Remember to always wipe dalvic cache and fix permissions (darkside cache wipe) after flashing a new ROM
After you flash your ROM and Gapps then boot that's when you can flash kernels, mods, and apk's so it would have a lesser chance of a soft brick
Happy Flashing!
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Cool. Thanks for the reply. I went and grabbed super wipe and cache wipe. So essentially, I just put those two on my sd and flash like I do a rom zip from recovery and then flash the rom itself and do a darkside cache wipe after new rom is installed before restarting and booting for the first time? Do I still need to do factory reset/wipe or is that part of the scripts? I have the goo app so I can use twrp instead since it's recommended for almost all roms I will be installing. Any major reason why, besides that it has touch function and backup renaming? Is it safe to install from the goo app on stock rom?
I think I will probably try one of the jellybean roms you suggested. I just didn't want random reboots, and I heard that's an issue with jelly bean roms but I think that might have been specific to aokp ones or something. Occasional FCs aren't too big of a deal though.
One other thing though... how do I fix permissions? I kept reading about that but never did it. Do you mean in recovery or under superuser?

how to properly flash a rom
http://forum.xda-developers.com/showthread.php?t=1926754
just follow that and you should be fine.
you can fix permission in recovery. its under advanced in cwm and twrp.

merrygocow said:
how to properly flash a rom
http://forum.xda-developers.com/showthread.php?t=1926754
just follow that and you should be fine.
you can fix permission in recovery. its under advanced in cwm and twrp.
Click to expand...
Click to collapse
Ok thanks. He seems to recommend not using the darkside scripts. I have a slightly older CWM 5.0.2.6 that I did via odin BTW so do I fall into the 'don't' use darkside category or does he mean anything after 5.0.2.7? I don't mind wiping cache and dalvik manually and doing all the formats if that's the case.
Do I fix permissions after I have booted the rom and waited 10 mins and restarted back into cwm or before I boot it for the first time?

benjmiester said:
Ok thanks. He seems to recommend not using the darkside scripts. I have a slightly older CWM 5.0.2.6 that I did via odin BTW so do I fall into the 'don't' use darkside category or does he mean anything after 5.0.2.7? I don't mind wiping cache and dalvik manually and doing all the formats if that's the case.
Do I fix permissions after I have booted the rom and waited 10 mins and restarted back into cwm or before I boot it for the first time?
Click to expand...
Click to collapse
I usually do it after flashing. And you don't need to do it every single time. Also, there's no need to follow everything down to the letter when you flash, wipe cache/dalvik/factory reset/wipe system/fix permissions/sit for 10 mins/reboot/reboot again/etc. Flashing is like cooking. As long as you don't deviate too much from the recipe, you'll get edible food (or a working ROM). If it doesn't work out, just toss the food out and try again (softbricked phone, reflash). If you try something stupid, you'll set your kitchen on fire when you don't have insurance (comparable to hard bricking your phone).

I usually wait till I've restored all my apps before fixing permissions, and then sometimes I don't if everything is working fine. As for recovery, I know you're familiar with CWM, but I'd recommend spending some time using TWRP. It's really great. You don't need the scripts with TWRP, but since TWRP lets you cue up zips, you can set it to do super wipe, ROM, gapps, and cache wipe all in one go. Kinda cool. And if you're itching to try jelly bean, AOKP JB milestone 1 is stable and smooth. There are even a couple custom kernels for it and CM10 (which has also reached a stable version, though I haven't tried it).
Sent from my beastly Galaxy S 2.

Dark side super wipe and cache wipe work perfectly on 5.0.2.6! That's how I got PACman ROM on my phone. I didn't bother with fix permissions. Well, I would say don't worry unless the instructions specify to do so.
Either way, I like CWM because I used it on my Samsung Galaxy Ace. Its just the wipes are broken for this phone so the scripts have to be used and work perfect. Happy flashing!
Sent from my SAMSUNG-SGH-T989 using xda premium

benjmiester said:
Ok thanks. He seems to recommend not using the darkside scripts. I have a slightly older CWM 5.0.2.6 that I did via odin BTW so do I fall into the 'don't' use darkside category or does he mean anything after 5.0.2.7? I don't mind wiping cache and dalvik manually and doing all the formats if that's the case.
Do I fix permissions after I have booted the rom and waited 10 mins and restarted back into cwm or before I boot it for the first time?
Click to expand...
Click to collapse
no it's fine to use the scripts w/ cwm 5. just don't use the scripts on cwm 6. that's what he meant.
i usually fix permission after the first reboot & waiting 10-15 mins.
i second the twrp recommendation...however if you're flashing something old, then cwm is the way to go. i haven't had any problems flashing anything in cwm. the latest twrp however failed me after i tried to flash a gb theme for jugg lol.

merrygocow said:
no it's fine to use the scripts w/ cwm 5. just don't use the scripts on cwm 6. that's what he meant.
i usually fix permission after the first reboot & waiting 10-15 mins.
i second the twrp recommendation...however if you're flashing something old, then cwm is the way to go. i haven't had any problems flashing anything in cwm. the latest twrp however failed me after i tried to flash a gb theme for jugg lol.
Click to expand...
Click to collapse
Ok, just wanted to make sure on that one.
Thanks for all the input everybody. Hopefully I will get a chance to do my flash over the holiday. I plan on going with the Sbean V8. Really all of the roms out look excellent but this one looks good for a JB daily driver. I went ahead and downloaded Jedi X1 too though in case the sbean doesn't work out for whatever reason. I have to tether my phone at home for internet so I thought it might be good to have a backup just in case PDAnet doesn't want to work.
Is twrp ok to install from Goo manager on my stock rom or should I flash a new rom and then use it from then on? I just want to make sure it won't conflict with the stocker or the CWM that I have on it already.

benjmiester said:
Ok, just wanted to make sure on that one.
Thanks for all the input everybody. Hopefully I will get a chance to do my flash over the holiday. I plan on going with the Sbean V8. Really all of the roms out look excellent but this one looks good for a JB daily driver. I went ahead and downloaded Jedi X1 too though in case the sbean doesn't work out for whatever reason. I have to tether my phone at home for internet so I thought it might be good to have a backup just in case PDAnet doesn't want to work.
Is twrp ok to install from Goo manager on my stock rom or should I flash a new rom and then use it from then on? I just want to make sure it won't conflict with the stocker or the CWM that I have on it already.
Click to expand...
Click to collapse
--Update--
I got Sbean v8 installed and working just wonderfully! I used CWM for my install with the darkside superwipe and cache wipe scripts. Everything went fine and i'm very happy with the new rom. Thanks everyone. I hope this thread will help any other first flashers in the future.

Some advice needed!

tl;dr: What happens if I upgrade to CWM 6 after having used Darkside Superwipe on CWM 5?
And now the long explanation of what happened:
I have a Telus T989D, and I had installed the stock Telus JB ROM from this thread: http://forum.xda-developers.com/showthread.php?t=2343748
I previously had CWM, but as per the instructions in the thread I installed TWRP, ran the Infamous Superwipe zip file, and then proceeded to flash the ROM.
Then today I decided to install CM 10.1. The first thing I did was flash CWM 6.x (I forget the exact version, but it was the latest one) from ODIN. Then I downloaded the latest stable build (CM 10.1.2). I then ran the Infamous Superwipe zip file again, and flashed CM 10.1. The result was that the phone would get stuck on the Cyanogenmod circle logo. I did some Googling and found out some people who had bootloops after installing Cyanogenmod, and it was suggested that this was due to a bad wipe, and that using Darkside Superwipe would fix the problem. So I proceeded to give Darkside Superwipe a try... Of course at the time I hadn't realized that 1) What I had was not actually a boot loop (it wasn't rebooting, it was just stuck at the logo), and 2) that Darkside Superwipe should not be used with CWM 6. After flashing the Darkside file, my CWM 6 would load up but would fail to flash ANY zip file that I selected (it would just get stuck on the first line, "Installing xxx.zip"). It would also fail to wipe the /cache partition (would freeze at "wiping /cache partition").
After soft-bricking my phone by trying to flash a different recovery from Heimdall, I ended up following a guide on this forum to flash the stock Gingerbread ROM from Odin. I then flashed CWM 5.0.2.7, did the Darkside Superwipe, installed CM 10.1, and now thankfully the phone works.
My question is... Does anybody know what happened here? And any ideas what will happen if I try to upgrade my CyanogenMod later on? Will I have any issues running CWM 5.x with CM 10.1 or 10.2? I'm a bit afraid of updating to CWM 6 since I have no idea what the result will be.
I later learned that Infamous Wipe is only to be used with TW-based 4.1.2 ROMs, since it adds a preload partition. Did I end up somehow messing up my partitions by using the Infamous & Darkside Superwipe files?
Sorry for the long post... I just figured I should give as much information as possible! I'd really appreciate it if anybody has an explanation for what happened (messed up partitions?) and how to fix it!

OK so what u need to do first is stop flashing all these recoveries, DL twrp2.6.1.0 and flash that with Odin, stay with this recovery, cwm is OK but not updated frequently enough to keep up with newer flashing scripts, now don't use superwipe/super cache wipes with twrp, they will cause loops, do a full wipe with twrp, mount to USB move all files off SD cards and format them, replace any/all files from SD card that u want, now flash ROM, flash gapps, reboot and let sit ten min, this should fix ur issues, as far as what happens, u used superwipe scripts on 6.x+cwm, those scripts were meant for cwm5x, it'll loop every time...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

soupysoup said:
OK so what u need to do first is stop flashing all these recoveries, DL twrp2.6.1.0 and flash that with Odin, stay with this recovery, cwm is OK but not updated frequently enough to keep up with newer flashing scripts, now don't use superwipe/super cache wipes with twrp, they will cause loops, do a full wipe with twrp, mount to USB move all files off SD cards and format them, replace any/all files from SD card that u want, now flash ROM, flash gapps, reboot and let sit ten min, this should fix ur issues, as far as what happens, u used superwipe scripts on 6.x+cwm, those scripts were meant for cwm5x, it'll loop every time...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks soupysoup! I will do that the next time I update the phone. And just another quick question: do you know if TWRP is safe to use with CyanogenMod (since it seems that they recommend CWM)?

Faruk88 said:
Thanks soupysoup! I will do that the next time I update the phone. And just another quick question: do you know if TWRP is safe to use with CyanogenMod (since it seems that they recommend CWM)?
Click to expand...
Click to collapse
Yes, actually I reccomend twrp to everyone for every ROM, the only way a ROM could be recovery specific would be if the ROM called for specific flashing scripts a certain recovery used/ran but twrp is updated a lot and always uses the newest flashing scripts in there builds, plus the recovery itself is very user friendly, the newest version is 2.6.1.0, go check that out n fully 4.3 compatible
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

soupysoup said:
Yes, actually I reccomend twrp to everyone for every ROM, the only way a ROM could be recovery specific would be if the ROM called for specific flashing scripts a certain recovery used/ran but twrp is updated a lot and always uses the newest flashing scripts in there builds, plus the recovery itself is very user friendly, the newest version is 2.6.1.0, go check that out n fully 4.3 compatible
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Perfect, thanks! Just one last question, then: In your previous post you said to flash TWRP through Odin. Does it matter if I flash through Odin or if I just download Goo manager and switch to TWRP from there? Which one of the two options is safer/better?

Faruk88 said:
Perfect, thanks! Just one last question, then: In your previous post you said to flash TWRP through Odin. Does it matter if I flash through Odin or if I just download Goo manager and switch to TWRP from there? Which one of the two options is safer/better?
Click to expand...
Click to collapse
U can use goo manager if u want, but I will say this, sometimes too can cause soft bricks, in which case u would need Odin to recover , so in my professional opinion I would suggest using Odin from scratch
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app