Hello guys,
I was on omera with redpill kernel but due to hardwares problems (battery wasn't very good), I wanted to prepare my note for garanty.
So I tried to flash a stock firmware with odin. It failed and I'm now strucked at "firmware upgrade encourtered an issue. Please select recovery mode in Kies and try again". I have tried eveything and now I know that there is a problem with pit partition. I would like to flash a new pit file in odin but I can't find one (galaxy note 2 7100)
So if anybody can send me one I'll be very happy.
Thanks
If ur download mode still working try to flash ur stock rom via odin first, if it doesn't work and u need a pit file go and look at dr. Ketan thread, u will find what you want there..
↖(^▽^)↗ Sent From Rego Galaxy Note!! ↖(^▽^)↗
Okay. So I find the pit file but it didn't help : stuck to "get in PIT for mapping"
What does my phone :
ClockWorkMod/ Recovery unvailable
Boot goes on "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Download/Odin mode available : Custom Binary Download : Yes ( 1 count)
Current binary : Samsung official
System status : Custom
How the probleme hapenned : I was trying to flash to a stock rom in Odin but it failed. I disconnected the phone : Brick
What I tried : - Restore with two differents computer, all ports, with new pilotes, with the stock kernel (samsung and orange)
- Via kies, connections issus
- Restore with original rom, kernel, PIT, and bootloader files (in the same time AND one by one)
Please HELP !
Related
Friends
My Note 2 suddenly is soft bricked and i need you help. It turns on with Firmware upgrade encountered an issue. I cant get into recovery, but download mode is working. I tried different roms but all fail at sboot.bin and tz.img. Rest all files flash properly if flashed one by one. Tried different custom recoveries but cant get recovery mode. Tried kies recovery but no luck. Tried disabling kies when using odin but no luck Tried to repartition using a pit file but get error, no pit partition, but when i print pit it shows me all partition. I cant get a warranty as I bought this phone from another country. My local service center rejected it as it is from another country.
When i go to download mode i get this
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
Please can someone help me...... i fear i have to dispose my Note 2 which i bought after saving a lot of pocket money.
FixMyBrick said:
Friends
My Note 2 suddenly is soft bricked and i need you help. It turns on with Firmware upgrade encountered an issue. I cant get into recovery, but download mode is working. I tried different roms but all fail at sboot.bin and tz.img. Rest all files flash properly if flashed one by one. Tried different custom recoveries but cant get recovery mode. Tried kies recovery but no luck. Tried disabling kies when using odin but no luck Tried to repartition using a pit file but get error, no pit partition, but when i print pit it shows me all partition. I cant get a warranty as I bought this phone from another country. My local service center rejected it as it is from another country.
When i go to download mode i get this
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
Please can someone help me...... i fear i have to dispose my Note 2 which i bought after saving a lot of pocket money.
Click to expand...
Click to collapse
First don't worry.
It is international note2 version as download mode says it's GT-N7100.
Download latest firmware of your country for your phone. Download whole ROM, not only kernel/recovery or modem. Download full ROM from http://forum.xda-developers.com/showthread.php?t=1896696 thread.
Follow the steps proper from that thread.
If still having problem, post your odin log. Also mention OS of your PC.
Sent from my GT-N7100 using Tapatalk 4
MBariya said:
First don't worry.
It is international note2 version as download mode says it's GT-N7100.
Download latest firmware of your country for your phone. Download whole ROM, not only kernel/recovery or modem. Download full ROM from http://forum.xda-developers.com/showthread.php?t=1896696 thread.
Follow the steps proper from that thread.
If still having problem, post your odin log. Also mention OS of your PC.
Sent from my GT-N7100 using Tapatalk 4
Click to expand...
Click to collapse
All Roms fail at sboot.bin or tz.img. Tried removing them from the rom file and flashed. But still showing Firmware Upgrade Issue. Using Win 7 But also tried with Windows XP on other system also changed 3 to 4 data cables,
Help, my phone is now stuck on the second samsung logo and wont boot to desktop.
I was on Phoenix Rom v15.7 and upgrading to Phoenix Rom 16, after flashing phoenix rom 16, my phone stuck in bootloop and cannot enter into recovery mod. So I decided to download stock 4.3 N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar from sammobile and flash it using odin. Even after that, my phone is still stuck on the second samsung logo. So I tried to flash pit file and the stock rom from before, still no result at all...
My download screen now shows:
Odin Mode
Product Name : GT N7100
Custom Binary Download : Yes (13 Counts)
Custom Binary : Samsung Official
System Status : Custom
Knox Warranty Void : 1
AP SWREV : A2
I tried to flash 4.1.2 Rom using Odin but It cannot flash the sboot.bin and shows on the download mode screen unsupported version, Tried to downgrade my bootloader from 4.3 with dr ketan MJ5BLPatch.tar and get the same result as the 4.1.2 rom. I can now access recovery and download mode, but cannot successfully boot, tried to flash phoenix rom v15, still failed
Please help, I'm Stuck... :crying:
shinobu91 said:
Help, my phone is now stuck on the second samsung logo and wont boot to desktop.
I was on Phoenix Rom v15.7 and upgrading to Phoenix Rom 16, after flashing phoenix rom 16, my phone stuck in bootloop and cannot enter into recovery mod. So I decided to download stock 4.3 N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar from sammobile and flash it using odin. Even after that, my phone is still stuck on the second samsung logo. So I tried to flash pit file and the stock rom from before, still no result at all...
My download screen now shows:
Odin Mode
Product Name : GT N7100
Custom Binary Download : Yes (13 Counts)
Custom Binary : Samsung Official
System Status : Custom
Knox Warranty Void : 1
AP SWREV : A2
I tried to flash 4.1.2 Rom using Odin but It cannot flash the sboot.bin and shows on the download mode screen unsupported version, Tried to downgrade my bootloader from 4.3 with dr ketan MJ5BLPatch.tar and get the same result as the 4.1.2 rom. I can now access recovery and download mode, but cannot successfully boot, tried to flash phoenix rom v15, still failed
Please help, I'm Stuck... :crying:
Click to expand...
Click to collapse
Bump... Please Help...
shinobu91 said:
Help, my phone is now stuck on the second samsung logo and wont boot to desktop.
I was on Phoenix Rom v15.7 and upgrading to Phoenix Rom 16, after flashing phoenix rom 16, my phone stuck in bootloop and cannot enter into recovery mod. So I decided to download stock 4.3 N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar from sammobile and flash it using odin. Even after that, my phone is still stuck on the second samsung logo. So I tried to flash pit file and the stock rom from before, still no result at all...
My download screen now shows:
Odin Mode
Product Name : GT N7100
Custom Binary Download : Yes (13 Counts)
Custom Binary : Samsung Official
System Status : Custom
Knox Warranty Void : 1
AP SWREV : A2
I tried to flash 4.1.2 Rom using Odin but It cannot flash the sboot.bin and shows on the download mode screen unsupported version, Tried to downgrade my bootloader from 4.3 with dr ketan MJ5BLPatch.tar and get the same result as the 4.1.2 rom. I can now access recovery and download mode, but cannot successfully boot, tried to flash phoenix rom v15, still failed
Please help, I'm Stuck... :crying:
Click to expand...
Click to collapse
Hello..
You can try flash philz_touch_5.15.0-n7100.tar.md5 via odin pda and reboot..if still stuck at samsung logo boot into recovery and wipe data/factory reset and reboot..
shinobu91 said:
Help, my phone is now stuck on the second samsung logo and wont boot to desktop.
I was on Phoenix Rom v15.7 and upgrading to Phoenix Rom 16, after flashing phoenix rom 16, my phone stuck in bootloop and cannot enter into recovery mod. So I decided to download stock 4.3 N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar from sammobile and flash it using odin. Even after that, my phone is still stuck on the second samsung logo. So I tried to flash pit file and the stock rom from before, still no result at all...
My download screen now shows:
Odin Mode
Product Name : GT N7100
Custom Binary Download : Yes (13 Counts)
Custom Binary : Samsung Official
System Status : Custom
Knox Warranty Void : 1
AP SWREV : A2
I tried to flash 4.1.2 Rom using Odin but It cannot flash the sboot.bin and shows on the download mode screen unsupported version, Tried to downgrade my bootloader from 4.3 with dr ketan MJ5BLPatch.tar and get the same result as the 4.1.2 rom. I can now access recovery and download mode, but cannot successfully boot, tried to flash phoenix rom v15, still failed
Please help, I'm Stuck... :crying:
Click to expand...
Click to collapse
I am sure you must have selected too many mods in Aroma while installing Phoenix and you must have flashed v16 without wiping. This is the reason behind your problem.
How to fix-
1.Flash philz touch 5.15.0
2.Select wipe(second option) from philz recovery and choose "Clean to flash a new rom"
3.Now flash any ROM of your choice and reboot (do not fix root when prompted)
I guarantee your phone will boot now. Now Cheers
Sent from my GT-N7100 using XDA Premium 4 mobile app
If you'd follow the instructions correctly there's no reason you'll be stuck..i flashed 16.0 twice but everything was ok.follow the advices given to you and try again..:good:
P.S..can someone give me idea to install sony package in note 2 coz i didn't found on the Phoenix V16 aroma?i tried flashed the 4.3 sony package zip downloaded from codexc but encountered keypad stopped,media stopped & others..
hello, I bought this i747 in its current condition. I know nothing about its history.
when I power it on it goes to the phone, !, comp screen saying firmware upgrade encounter an issue, select recovery mode in kies.
in the top corner it says:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: ENABLE
WARRANTY BITS: 0
BOOTLOADER RP SWREV: 2
Now when I connect to kies and run emergency firmware everything loads on kies, then gives an error, and
underneath BOOTLOADER RP SWREV: 2 it says: SW REV CHECK FAIL: Fused 2 > Binary 0 in red.
If this phone fixable? Any help would be appreciated.
mtsosie said:
hello, I bought this i747 in its current condition. I know nothing about its history.
when I power it on it goes to the phone, !, comp screen saying firmware upgrade encounter an issue, select recovery mode in kies.
in the top corner it says:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: ENABLE
WARRANTY BITS: 0
BOOTLOADER RP SWREV: 2
Now when I connect to kies and run emergency firmware everything loads on kies, then gives an error, and
underneath BOOTLOADER RP SWREV: 2 it says: SW REV CHECK FAIL: Fused 2 > Binary 0 in red.
If this phone fixable? Any help would be appreciated.
Click to expand...
Click to collapse
Did you say it was recognized in Kies but firmware recovery failed? If so, and you were using Kies (not Kies 3), we may assume the last system update was not older than Android 4.1.1. I'll suggest you try these steps (in that order),i.e. if one doesn't work, try the next step ..
1. Try booting into recovery mode and doing a hard wipe/reset
2. Download the correct stock image from the thread below and flash via Odin. If you need help with flashing via Odin, please let me know
http://forum.xda-developers.com/showthread.php?t=1739426 or visit Sammobile.com to download the correct stock image.
3. Open Kies. Do not connect the phone yet. Go to Tools => Firmware Upgrade and Initialization. Enter your phone model name (SGH-I747)=>OK and serial number. Check device information inside the battery compartment. Wait for firmware download to complete and you are prompted to connect the phone and follow the rest of the on-screen instructions.
4. Contact the vendor to find out what they did wrong and see what refund options you have
Ok, so I also wasn't able to get into recovery.
I decided to flash cwm via odin. After it flashed the phone rebooted and turned on normally. I have turned it on and off like 5 times and everytime it boots normal.....But, there is still a problem... baseband version is Unknown and there is no IMEI Number.
Larry2999 said:
Did you say it was recognized in Kies but firmware recovery failed? If so, and you were using Kies (not Kies 3), we may assume the last system update was not older than Android 4.1.1. I'll suggest you try these steps (in that order),i.e. if one doesn't work, try the next step ..
1. Try booting into recovery mode and doing a hard wipe/reset
2. Download the correct stock image from the thread below and flash via Odin. If you need help with flashing via Odin, please let me know
http://forum.xda-developers.com/showthread.php?t=1739426 or visit Sammobile.com to download the correct stock image.
3. Open Kies. Do not connect the phone yet. Go to Tools => Firmware Upgrade and Initialization. Enter your phone model name (SGH-I747)=>OK and serial number. Check device information inside the battery compartment. Wait for firmware download to complete and you are prompted to connect the phone and follow the rest of the on-screen instructions.
4. Contact the vendor to find out what they did wrong and see what refund options you have
Click to expand...
Click to collapse
hi, yes those were the steps I tried and the result was fail. Now that I can boot it, it shows its 4.3 but no baseband and no imei.
mtsosie said:
hi, yes those were the steps I tried and the result was fail. Now that I can boot it, it shows its 4.3 but no baseband and no imei.
Click to expand...
Click to collapse
Oh, it's 4.3. Perhaps even better because you may be able to flash the 4.3 restore image. Your baseband/modem is corrupt or missing which is why it's showing the no baseband message.
Please see the thread below for the complete 4.3 stock restore image. Download the stock restore image and flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=2658486
Or you may just flash the 4.3 JB modem via custom recovery since you have custom recovery working. The modem zip can be found here ...
http://www.androidfilehost.com/?fid=23212708291681456
Larry2999 said:
Oh, it's 4.3. Perhaps even better because you may be able to flash the 4.3 restore image. Your baseband/modem is corrupt or missing which is why it's showing the no baseband message.
Please see the thread below for the complete 4.3 stock restore image. Download the stock restore image and flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=2658486
Or you may just flash the 4.3 JB modem via custom recovery since you have custom recovery working. The modem zip can be found here ...
http://www.androidfilehost.com/?fid=23212708291681456
Click to expand...
Click to collapse
:good: right on. you rock man. I flashed the modem and it works great now. thanks again.
mtsosie said:
:good: right on. you rock man. I flashed the modem and it works great now. thanks again.
Click to expand...
Click to collapse
You are most welcome. Glad to know it's now working.
hey guys am in trouble
Odin Refuse to flash
I747 warranty bit :1
bootloader rp swrev 2
SW rev check fail fused 2
Phone stuck on kies firmware upgrade encounterd
I Cant get 4.3 back again or downgrade to any older version
plz help me :'(
here is two screen shot in download mode while odin error
and in normal mode when i try 2 open
dark_darkness said:
hey guys am in trouble
Odin Refuse to flash
I747 warranty bit :1
bootloader rp swrev 2
SW rev check fail fused 2
Phone stuck on kies firmware upgrade encounterd
I Cant get 4.3 back again or downgrade to any older version
plz help me :'(
here is two screen shot in download mode while odin error
and in normal mode when i try 2 open
Click to expand...
Click to collapse
Can you try flashing custom recovery via Odin and then using custom recovery to do a stock restore to 4.3 following the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
can u share a link?
Larry2999 said:
Can you try flashing custom recovery via Odin and then using custom recovery to do a stock restore to 4.3 following the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
i've tried many custom roms
start flashing will and end with bug error at the end coz of warranty
can u share me a link for firmware tested ?
dark_darkness said:
i've tried many custom roms
start flashing will and end with bug error at the end coz of warranty
can u share me a link for firmware tested ?
Click to expand...
Click to collapse
I suggested custom recovery and not custom ROM. The idea is to get your phone back in working order first. Flashing a complete stock restore image should do it. Please refer to the thread I forwarded earlier. You should be able to flash custom recovery (like CWM or TWRP) to your phone via Odin and then use the custom recovery to flash the stock restore image.
Dear all,
I just have a serious problem with my Note 2 N7105. I bought this phone with a rooted 4.3 androit and everything worked fine beside using the automatic update function (over the air update of android).
Therefore I downloaded the german 4.4.2 from Sammobile and flashed it with odin.
sammobile.com/firmwares/download/32565/N7105XXUFNE3_N7105DBTFNE1_DBT
Odin flashed completely with any errors . -> All threads completed. (succeeded: 1 / fail: 0)
But unfortunately it is not rebooting to androit nor reboot into recovery mode. After turning on the phone, I can see the samsung logo and after that it tried to boot and a red exclamation mark pops up and it's restarting again. The only possible thing is to get into the download mode again.
I also downloaded the german 4.3 version from sammobile and flased it with odin - but results stay the same.
I would be very happy about any help. Sorry in advance for my unprofessional explanation.
make sure you have downloaded the right tar file for your samsung
Anilkumar12345 said:
make sure you have downloaded the right tar file for your samsung
Click to expand...
Click to collapse
Could fix it meanwhile - it wasn't a problem of the tar file - the tar file was correct - but whyever the recovery was broken after downloading and installing the cwm recovery I was able to get into the recovery mode again and afterwards also successfully install the stock 4.4.2 tar file from sammobile.
Cheers,
mr_moods
Hi, sorry for my english.I ll try to explain my situation:
1 flash cf-root with odin, it work ok
2 flash twrp with odin and then (my friend suggest me) flash newest bootloader with odin beacouse he want install a newest mod.
Now phone stuk on galaxy note 2 logo at startup.
But there is a big problem, i can go only in download mode and when i try to flash a stock rom odin stops at system.img and don t go...
I tried with kies too but it stops to work at the same
Any idea?
Thank you all
I tried other usb cable and other odin version and all work...