White htc logo screen after flashed bricked kernel - HTC One X

Hi,
I flashed this bricked kernel on htc one x ics version phone. After flashing it is not booting into the system. It is stopped at the htc logo white screen. Using pc I go to recovery and reflash ARHD v9.7.2. Even then also after flashing complete it stops at htc white logo. Please anybody help me.

Sounds like the kernel should have been repacked. There is a whole thread for repacked kernels for ARHD.

Flash another kernel over it.
Take faux for example, flash the boot.img in fastboot and flash the modules from recovery and you are probably good to go again !

When testing a new kernel/boot.img there is a fastboot command that flashes the kernel temporarily: fastboot boot boot.img (omit flash)
Sent from my One X

http://forum.xda-developers.com/showthread.php?t=1654982
This is the link to the repacked kernels for ARHD ROMs ... Download the kernel's boot.img and modules which you desire and flash boot.img then flash modules in recovery . The problem you're stuck in htc logo is because you didn't flash the modules . Or maybe the kernel is not repacked for ARHD .

Related

installing viperx 2.0.0 help!!!!!!

Hey, I am looking for some help installing viper x (cant post in developer section so trying here), I was using it on previous version but since 2.0.0 I cannot get past HTC splash screen, I have tried Fastboot erase cache which didn't work. I have flashed the correct boot.img before installing the rom, other roms work and have browsed through tonnes of pages on the thread for viperx and found nothing so I am confused, any help???
Thanks
HTC One X
Rom : ARHD 9.3.0
Baseband : 2.1204.135.20
Ril : 2.17.401.2
Flash boot.img again.
Does it need modules?
BenPope said:
Flash boot.img again.
Does it need modules?
Click to expand...
Click to collapse
+1 ..flash the stock kernel..n it doesn't need any modules..u can find the kernel in the Rom's zip itself..
Sent from my Stunning White HTC One X
viper x help
BenPope said:
Flash boot.img again.
Does it need modules?
Click to expand...
Click to collapse
I have flashed it multiple times, Im currently on stock kernal which the viper x supports
Pretty sure the boot.img you're flashing is wrong.
viper x help
Ok so I just went through the steps again but with the venom flasher aswell
1. flashed stock kernal using latest venom flasher
2. fastboot flash boot.img taken from the viper x rom itself
3. fastboot erase cache
4. aroma installer installed rom
stuck on HTC splash screen, any ideas???
Did you take it out of the Rom again, just now, and then flash the ROM and boot.img?
Or are you using one you prepared earlier?
2. Fastboot flash boot boot.img then erase cache then in recovery wipe data cache dalvik then install rom from recovery
viper x help
ef1x said:
2. Fastboot flash boot boot.img then erase cache then in recovery wipe data cache dalvik then install rom from recovery
Click to expand...
Click to collapse
that was the problem was the dalvik totally forgot about that cheers for everyones help.
Thats why we are here to help cheers
Dont use flasher, take out the boot.img from Rom.zip. should work, if not, check zip sum
Enviado desde mi HTC One X

[Solved]Cant install rd miui rom

Hi,
I have been on CoreDroid and I am trying to install the RD-Miui Rom, I have extracted the boot.img flashed it via fastboot and installed the rom, but all I get is the boot screen, the one thing that happens when I flash the boot.img is the phone reboots immediately after(not sure this should happen) I've also tryed using the boot.img flasher provided by the developer but I still get stuck on the boot screen. Can anyone help?
I simply reformatted the system and it worked

[Q] [Help] stuck in logo-cannot access recovery mode

My phone was stuck in htc logo, cannot access into recovery mode but my bootloader was unlocked..
what can i do??
it was begin when i tried to flash CWN recovery to TWRP recovery:crying:
My phone is rooted and use custom rom
sorry for my very bad english...
fastboot erase cache
Sent from my IceCold One X
I had that problem when trying to flash CM10.1, but the above fixed it.
but now my problem is stuck on htc logo..
i already s-off, install custom recovery, upgrade hboot(1.36.0000), flash boot.img and install new custom rom...
what's my htc problems???
What rom did you flash?
Sent from my HTC One X TEGRA 3 using xda premium
Using CM10.1
Make a full wipe in recovery , install :
CM10.1
Gapps
Vendors
Then flash the boot.img in the bootloader and reboot.

[Q] Problem with custom roms

so i have the desire hd and i love the phone a lot but not the os too much. so heres the deal i tryed installing cyanogenmod.I unlocked the bootloader left the s-on and installed custom recovery via fastboot without a problem. next thing is I installed 3 recoverys non touch everyone different but when i install zip file with the rom it gets stuck every time on boot screen. the thing is i tried cyanogen 7.2.0 9 and 10.1 non of them worked and got stuck right on after it at the htc green logo,. whats the problem i pulled out the battery tried with only usb nothing worked. then i got scared that it isnt bricked dowloaded the original stock rooted rom as it was and installed through the same recovery .then it worked without a problem not even a glitch . i dont get it .im confused. apologies to the admin if it isnt in the right section.
my android version is 2.3.5 withe sense 3.0 and thats it . cant figure whats the problem . i flashed ducent of phones from symbian to iphone and even java based phones and even few htc ., but never had that boot loop problem., anyone please help
Fastboot flash the ROM zip's boot.img.
bananagranola said:
Fastboot flash the ROM zip's boot.img.
Click to expand...
Click to collapse
so i need to flash boot.img from the rom and flash it with fast boot then install software with custom recovery . i use boot image from stock rom or cyanogen ?
alenkosb said:
so i need to flash boot.img from the rom and flash it with fast boot then install software with custom recovery . i use boot image from stock rom or cyanogen ?
Click to expand...
Click to collapse
No, flash ROM from custom recovery first, then the boot.img from fastboot. Use a custom, not stock, recovery (CWM, 4ext, or TWRP).
bananagranola said:
No, flash ROM from custom recovery first, then the boot.img from fastboot. Use a custom, not stock, recovery (CWM, 4ext, or TWRP).
Click to expand...
Click to collapse
i used 3 diferent custom recoverys for desire hd. ill try the method.btw you cant install cyan with stock recovery .boot img from stock rom ?
no, the boot.img inside the zip of the Rom you´re going to flash at this moment
alenkosb said:
i used 3 diferent custom recoverys for desire hd. ill try the method.btw you cant install cyan with stock recovery .boot img from stock rom ?
Click to expand...
Click to collapse
I have no idea what you're trying to say. What recoveries have you tried to flash? How have you tried to flash them? How are you trying to flash the ROM? What is "cyan," ClockworkMod (CWM) or CyanogenMod (CM)? What is a "stock recovery .boot img"? You can't flash anything from the stock recovery. You can't flash the stock ROM's boot.img with a custom ROM. Recoveries do not have boot.imgs that you need to worry about. I am saying that you need to have a custom recovery, like CWM, 4ext, or TWRP, installed. You do that through "fastboot flash recovery recovery.img." You then need to download a ROM zip, boot into recovery with power and volume-down, factory reset, and install the ROM. You then need to extract the boot.img from the ROM zip you just flashed and flash it from the computer with "fastboot flash boot boot.img."
bananagranola said:
I have no idea what you're trying to say. What recoveries have you tried to flash? How have you tried to flash them? How are you trying to flash the ROM? What is "cyan," ClockworkMod (CWM) or CyanogenMod (CM)? What is a "stock recovery .boot img"? You can't flash anything from the stock recovery. You can't flash the stock ROM's boot.img with a custom ROM. Recoveries do not have boot.imgs that you need to worry about. I am saying that you need to have a custom recovery, like CWM, 4ext, or TWRP, installed. You do that through "fastboot flash recovery recovery.img." You then need to download a ROM zip, boot into recovery with power and volume-down, factory reset, and install the ROM. You then need to extract the boot.img from the ROM zip you just flashed and flash it from the computer with "fastboot flash boot boot.img."
Click to expand...
Click to collapse
Sorry for the misunderstanding. heres the deal ive had 3 clockworkmode recoverys and different versions tried 3 zips(roms) with each one and every time de same thing.BUT now thanks to your help i flashed the boot.img file and it works perfectly

[Q] Kernel flashing problem

Hi,
when I flash kernel (LX11 kernel) with fastboot and install rom with cwm then i reboot and the old kernel flashes back (original sony logo).
I tried various rom-s and kernel, but always the same problem
gmocibob said:
Hi,
when I flash kernel (LX11 kernel) with fastboot and install rom with cwm then i reboot and the old kernel flashes back (original sony logo).
I tried various rom-s and kernel, but always the same problem
Click to expand...
Click to collapse
You are using wrong command to flash the kernel.
You are using
Code:
fastboot boot boot.img
but you must use
Code:
fastboot flash boot boot.img
If you miss the 'flash' part, you will hotboot the kernel, that means this kernel is used for first boot after the flashing, afterwards the kernel on phone memory is used.
Someguyfromhell said:
You are using wrong command to flash the kernel.
You are using
Code:
fastboot boot boot.img
but you must use
Code:
fastboot flash boot boot.img
If you miss the 'flash' part, you will hotboot the kernel, that means this kernel is used for first boot after the flashing, afterwards the kernel on phone memory is used.
Click to expand...
Click to collapse
Thanks, now I know something new

Categories

Resources