Related
I've searched but I can't find any one else complaing of this problem and it's driving me nuts.
When I extend the hardware keyboard to type, my finger often rests on the power button turning the screen off. Does anybody else face this problem? Is there a registry hack to disable the power button with the keyboard is extended?
Thanks
jejeje
Same problem!!!! so frustating!!!
No you are not the only one; I also have this problem; when writing message I touch the power button accidentally a lot and the only solution I could come to was to be more delicate and careful when writing
Regards,
Yep, same problem here! A really silly thing to miss - there's not particular reason to not have the power button on the right at the top rather than the left.
all the time....
very frustrating,
..then I try to open it, wait a fraction of a second, click it again for fear of not having pushed it enough the first time, ... and I end with the sleep mode on the phone , .. so I click it firmly for a third time finally opening it..
timewaste...
same here
nickpope said:
I've searched but I can't find any one else complaing of this problem and it's driving me nuts.
When I extend the hardware keyboard to type, my finger often rests on the power button turning the screen off. Does anybody else face this problem? Is there a registry hack to disable the power button with the keyboard is extended?
Thanks
Click to expand...
Click to collapse
Happens to a lot of people. Don't know how you search but:
http://forum.xda-developers.com/showthread.php?t=535229
http://forum.xda-developers.com/showthread.php?t=520834
same here
me too
Add me to the list.
Which makes me wonder, why didn't they place the power on the top right?
Well at least I know I'm not the only one. Still hoping someone smarter than I will find a way to disable it with keyboard extended
@vdKarel I would have found those post had I spelt button with two t's (#)
I wasnt having that problem until today actually. lol. funny you bring it up. After discovering this, i did find it a little inconvenient where the power button is placed
happens some times. probably the power button would be better in an other place
I do it all the time as well
I use it a lot (pages and pages of word documents written on it in the train) and it doesn't happen...
When I hold mine with keyboard extended, my left index (which is the one which could hit the power button) is folded, so it hits the left side of the keyboard "block" (no power button here) then goes under the screen "block" and holds the back of the keyboard "block", it doesn't press the left side of the screen "block" (which has the power button).
Do you guys have your left index extended for it to be along the left of both the keyboard "block" and the screen "block" ? I don't see how else you could be hitting the power button...
PS : On my TyTN, this allowed me to turn the PPC on and off with the left index tip with the keyboard out, this avoided waiting for the screen to rotate when I knew I'd wand it in landscape when I trun back on.
This only happens to me after ALMOST completing a 900 word e-mail . . .
You're not alone, and there are fixes for this:
http://forum.xda-developers.com/showthread.php?t=553784
http://forum.xda-developers.com/showthread.php?t=563592
For the Tilt 2, this doesn't happen. I don't know if it's because of WM 6.5 or something AT&T implemented or what, but the power button has no effect when the keyboard is out. I actually want to find a way to enable that because at times I want to put it in sleep mode while open.
Why do you have your fingers extended?? I never have this problem in my TP2!
ai6908 said:
Why do you have your fingers extended?? I never have this problem in my TP2!
Click to expand...
Click to collapse
um.. to hold it securely?
ummm, not to sound like a smart a$$ but this has been covered n many threads previously...i believe that if u search for "disable power button" ull find ur answer...its a simple .cab installation that disables the power button when the keyboard is extended...hope that helps and good luck
Very simple and very very light application.
Does exactly what it says on the TIN.
The reason I compiled this application is purely to avoid using power button as I don’t want it to worn out. To turn the screen on or off we have to use power button which might stop working if we use the button too much. This application will cut the use of the power button by 50% at least
Rather than using the power button to turn the screen on and off, tap on this application to turn the screen off. Very small application V1.0
I might release another one when I get feedback from the users.
If you want just exe file then copy it in to your phonewindows->start menu-> program folder
Or use cab file which will install it on the above location for you
Enjoy !!!!
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
+1
That makes a lot of sense!
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
hiya,
much appreciate for your comments. do you mean turning screen off as well as locking the screen..? so that when you touch the screen it won't come back on...?
I'm working on to prepare better version i.e. it would be on the home screen so that no clicking on start menu and then this app.
cheers
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
I think he means that you program should not only turn off the devise, but also lock it with the standard WM lock at the same time. That would be good for me, at least.
EgorLev said:
I think he means that you program should not only turn off the devise, but also lock it with the standard WM lock at the same time. That would be good for me, at least.
Click to expand...
Click to collapse
+1
screen off + lock at same time only pressing Powerbutton.
It work perfectly for me so as it is. I changed the left soft-key so that it will start "turn off the light.exe" .When the screen is off S2U2 will lock the screen. So I can turn off and lock the screen with only one click.
To change the soft key do this:
with a registry editor go to HKLM/Software/HTC/manila/ . in HomeLSKPath (left softkey) or HomeRSKPath (right softkey) write the address to "turn off the light.exe". HomeLSKText and HomeRSKText are the text for the softkeys.
That´s it!
update for touch diamond
hi everyone,
massive thanks to all those who provided replies. I have tried on my blackstone (Touch HD) and it does seems to turn off the screen plus all keys as well.
I can confirm that it doesnt lock all the keys i.e. doesnt lock the device on touch diamond model. I'll modify the program and upload the newer version with the feature of locking the keys plus turning off the screen.
once agian special thanks to everyone.
Certainly reading the comments above, people seemed to understand what I was getting at. With the screen off, the buttons on a HD will indeed be non-responsive, however if an event (SMS or similar) woke the screen, the device would be in an unlocked state. What I would be interested in is a program that turned off the screen and invoked the standard WM lock program (gwes.exe?).
Hope that makes sense.
i like this application but i think the icon is really ugly..
Hi,
is there a possibility to do a screen unlock application which can be activated by voice commander? the situation is this...
I used voice commander to launch google maps while my hand is busy when the screen is lock. however, i will need a program which can be initiated by the voice commander to unlock the screen so that i can navigate the maps. Right now i will have to unlock the screen the normal way which i find voice commander redundant since i'll have to use my finger during lunching anyway.
Can you help me on this? Many thanks in advance. =)
Major_Sarcasm said:
Certainly reading the comments above, people seemed to understand what I was getting at. With the screen off, the buttons on a HD will indeed be non-responsive, however if an event (SMS or similar) woke the screen, the device would be in an unlocked state. What I would be interested in is a program that turned off the screen and invoked the standard WM lock program (gwes.exe?).
Hope that makes sense.
Click to expand...
Click to collapse
Here is the app that has the feature which you prefer:
LockDevice => http://forum.xda-developers.com/showthread.php?t=542482
Thanks for the link!
Been using this app so i dont have to fumble with the power button to turn the screen off. Seems this app only turns off the screen and doesnt actualy put the phone in sleep. I would like an app like this that acts as the power button does. So when i put the phone to sleep with the icon, i cant accidently slide the keyboard out a touch and have the phone wake up.
The whole deal has to do with tilt 2's keyboard sensor and magnet cases. With this app, the keyboard sensor still activates when sliding into a magnet flap case, while having slie to wake disabled
carhigh said:
Been using this app so i dont have to fumble with the power button to turn the screen off. Seems this app only turns off the screen and doesnt actualy put the phone in sleep. I would like an app like this that acts as the power button does. So when i put the phone to sleep with the icon, i cant accidently slide the keyboard out a touch and have the phone wake up.
The whole deal has to do with tilt 2's keyboard sensor and magnet cases. With this app, the keyboard sensor still activates when sliding into a magnet flap case, while having slie to wake disabled
Click to expand...
Click to collapse
Hiya,
I'm working on the program so that you can have configuration option to simulate power button to put phone in sleep mode or jus to turn the screen off. This utility was just for people who want to save power whilst listening to the music, etc.
Please keep any ideas/suggestion coming. Much appreciated guys.
Watch the space guys....
That is great inítiative. I use the screen off function actually for the purpose to save power when navigation. screen off when there is a long straíght way to drive.
Put device to sleep mode will cause gps signal lost, which is not so nice.
I can image that there will be a lot of person who wnat to have different adds-on on this small application, it might be a solution to provide command argument.
Thank you.
I will try to see whether this one works for my purpose. Actually in my situation, I even don't want any key be locked as these keys are mapped for navigation.
How about screen toggle thus it is possible to map this application to a key?
awesome, i mapped the exe to a hardware key next to standby. now i can easily save power while wardr listening to music. ^_^
it combines very well with s2u2 locking function too.
big thanks!
tom_hungston said:
Very simple and very very light application.
Does exactly what it says on the TIN.
The reason I compiled this application is purely to avoid using power button as I don’t want it to worn out. To turn the screen on or off we have to use power button which might stop working if we use the button too much. This application will cut the use of the power button by 50% at least
Rather than using the power button to turn the screen on and off, tap on this application to turn the screen off. Very small application V1.0
I might release another one when I get feedback from the users.
If you want just exe file then copy it in to your phonewindows->start menu-> program folder
Or use cab file which will install it on the above location for you
Enjoy !!!!
Click to expand...
Click to collapse
Tom, may be it was to late to find your toggle light off switch, but it was very important for me to find it, thank you man, you solved a terrible issue for me, which is that programs stop updating (eg: twitter) when the device is in standby mode.
I heard that you can release another one, so my feedback is:
it takes about 2 seconds to turn off the light, isn't there any faster??? ))
This application is great. Combined with the S2U2 and HD Tweak i don't even have to use the power button at all. Device locked by S2U2 as soon as i turn off the light, waking up device by pulling out the stylus and rebooting with the help of HD Soft reset. Thanks
P.S. You should really add a decent icon, even though people can change it if they want to.
I forget the name of the button on the stylus that launches the wheel thingy, but it would be great it it could be disable completely. I use Lecturenotes and it's great that I can disable the wheel pop up, but I can't disable the button completely it seems. So if I am writing and I accidentally press it ( which happens all the time) at least the wheel pop up doesn't appear, but the word I am currently writing does disappear and I have to constantly write it again. I have the Bamboo Feel as well and it's awesome ergonomically speaking, but again it's the same thing. I tend to squeeze tightly when I write and I don't know that I can train myself to not accidentally push the button on the stylus. Would be nice if it could just be completely disabled.
I'm actually interested in this too, drives me nuts sometimes
Same here, I think it was put in a very bad location on the stylus.
Sent from my SM-P600 using xda app-developers app
Just go to Settings and in the tab Controls look for the S pen menu.
There you can disable the air command
Sent from my Samsung Galaxy Tab 10.1 Edition 2014
yeah, that stops the pen from bringing up the menu when you press the button but what we are looking for is what disables the pen button completely. So like, when you are writing the pen doesn't automatically switch into a select mode because you hit the button with your finger.
@arcadiua, JarkMackson & FLGibsonJr: This Samsung-specific functionality is provided by the system, no app can interfere here, as these touch events are not send to the app. I know of LectureNotes' users that have broken the S-pen button to circumvent the problem (either of the original or a second S-pen), but there are less destructive options, for instance to use a different stylus or to place the S-pen inside a `holder´ (which has the pleasant side-effect of increasing the S-pen size to that of a normal pencil).
if you don't mind a permanent solution. just pop off the button - it's pretty easy if you use a razor, just have something to catch the button when you pop it off. you should be able to then modify the button to not push the clicky thing.
while you're in there, you see to pots that you can turn to modify the sensitivity and offset of the pen if you're having any problems with them. i had posted a tutorial in the OG note 10 forum.
madsquabbles said:
if you don't mind a permanent solution. just pop off the button - it's pretty easy if you use a razor, just have something to catch the button when you pop it off. you should be able to then modify the button to not push the clicky thing.
while you're in there, you see to pots that you can turn to modify the sensitivity and offset of the pen if you're having any problems with them. i had posted a tutorial in the OG note 10 forum.
Click to expand...
Click to collapse
It worked!!! Just popped the button off with a razor, and then used that same razor to saw off the little nub at the end of the button that apparently would signal the button press, and then popped the button back on.
No more brief loss of the ability to write when I am in the middle of teaching.
Thank you!
jesus, thats super annoying. I need an eraser button for drawing. Looks like i need to buy a damn 3rd party stylus. Would be nice if the 10.1 at least supported tilt, then it would be worth dropping some money on an intuos pro pen...
I also use Lecture Notes as a student however I love using the stylus button. Lecture notes has the capability of using a single click as an eraser and a double click as undo.
BUT the most recent update has prevented me from using this feature any longer..
Now, every time you click the button it brings up the Air Command wheel and there is no option to turn it off.
Doesn't look like there is a workaround for this.. is there any way I could bring this up somewhere to raise awareness to the devs so they can enable an option to turn it off?
@mojo_jodroid: If you cannot disable `AirView´, the stylus button click is processed by Android/`AirView´ and does not reach LectureNotes.
acadoid said:
@mojo_jodroid: If you cannot disable `AirView´, the stylus button click is processed by Android/`AirView´ and does not reach LectureNotes.
Click to expand...
Click to collapse
i'm not sure what you mean by "the stylus button click is processed by android/android..."
@mojo_jodroid: It means that the input event `user presses stylus button´ is intercepted by Android/`AirView´ and removed from input processing (as if it never happened).
I've had an opportunity to play with a display model of the Note Edge recently and ultimately decided to buy one. It'll arrive on Tuesday.
The one thing that I really disliked (coming from a Note2) - is the awkward placement of the Note Edge's power button. So I was wondering if there'd be a way to add a soft power button to the edge/ticker screen -
I found a couple of options to play with which I've linked below.
https://play.google.com/store/apps/details?id=jp.co.kixx.tool.offwidget
https://play.google.com/store/apps/details?id=com.katecca.screenofflock
https://play.google.com/store/apps/details?id=dev.suriv.suscreen
https://play.google.com/store/apps/details?id=it.android.smartscreenonlite
http://www.xda-developers.com/android/wakeup-turns-on-your-screen-without-the-power-button/
That mostly addresses the 'off' part but 'on' looks relegated to being triggered by motion or the proximity sensor (because why would you want a 'screen on' app/button on any other phone - because the screen is... off).
I didn't play extensively with the Edge but if the edge/ticker screen is always on (or in a stand-by clock mode) then can someone make something that detects a swipe down and wakes the main screen? Or swipes to a shortcut that wakes the main screen?
Killiandros said:
I've had an opportunity to play with a display model of the Note Edge recently and ultimately decided to buy one. It'll arrive on Tuesday.
The one thing that I really disliked (coming from a Note2) - is the awkward placement of the Note Edge's power button. So I was wondering if there'd be a way to add a soft power button to the edge/ticker screen -
I found a couple of options to play with which I've linked below.
https://play.google.com/store/apps/details?id=jp.co.kixx.tool.offwidget
https://play.google.com/store/apps/details?id=com.katecca.screenofflock
https://play.google.com/store/apps/details?id=dev.suriv.suscreen
https://play.google.com/store/apps/details?id=it.android.smartscreenonlite
http://www.xda-developers.com/android/wakeup-turns-on-your-screen-without-the-power-button/
That mostly addresses the 'off' part but 'on' looks relegated to being triggered by motion or the proximity sensor (because why would you want a 'screen on' app/button on any other phone - because the screen is... off).
I didn't play extensively with the Edge but if the edge/ticker screen is always on (or in a stand-by clock mode) then can someone make something that detects a swipe down and wakes the main screen? Or swipes to a shortcut that wakes the main screen?
Click to expand...
Click to collapse
Hey! Glad you decided to join us edge users! About your question I'm personally using screen off and lock. I've had no problems and its working beautifully. Got it on my list of apps on the edge and even with the edge on just using it to control my music i click the button for it to turn off the screen and it does just that. It has some nice features as far as animations which i like. As far as the other apps I haven't tried them yet. Hope this helps. Have a good day
easy to do, already sorta included..... with screen off swipe up/down(one motion, do not lift finger between) on the edge screen the edge clock will activate, then swipe from right to left to pull up the app shortcuts cocktail, tap any app in the list and it will wake the main screen and app will be launched and waiting behind lock screen
nonmindo said:
easy to do, already sorta included..... with screen off swipe up/down(one motion, do not lift finger between) on the edge screen the edge clock will activate, then swipe from right to left to pull up the app shortcuts cocktail, tap any app in the list and it will wake the main screen and app will be launched and waiting behind lock screen
Click to expand...
Click to collapse
Oh, sweet. Thanks for this! I kept accidentally activating that and couldn't figure out what I was doing. Heh. I love this phone, I keep finding new things.
The easiest way around the poor power button placement is just to buy the official case so it turns on and off when you open and close the case. It really should of just came with the phone. They belong together. I bought it. It really is like a piece of the phone.
mas5acre said:
The easiest way around the poor power button placement is just to buy the official case so it turns on and off when you open and close the case. It really should of just came with the phone. They belong together. I bought it. It really is like a piece of the phone.
Click to expand...
Click to collapse
I use greenify. I long press the home button and it hibernates and turns off the screen. I've found it so much nicer than trying to mess with the power button location.
Sent from my SM-N915T using Tapatalk 2
cbucz24 said:
I use greenify. I long press the home button and it hibernates and turns off the screen. I've found it so much nicer than trying to mess with the power button location.
Sent from my SM-N915T using Tapatalk 2
Click to expand...
Click to collapse
Screen off and lock has this capability add well.
I don't mind having the power button on top, it's the switched back button and last used buttons I still can't get used to. Oh and I don't like how the home key doesn't respond to the pen without press, fail.
Lately I've set GMD gesture control to double tap for screen off. Just have to blacklist a few apps (like calculator) and keyboard where a rapid set of taps will shut screen off when you are trying to do something else. Would be nice if there was a double tap to turn screen on! Some phones can do this. But, for now, I'm fine with just pressing home button for that.
EDIT: Fixed it (for now). Copied from my post on site 2.
What's up guys, I'm sorry for the late followup. It turned out, that I was too lazy to send it back. Now, almost a year later, I'd gotten into fixing phones and got the courage to open up the device and see what's up with the power button. It felt like the issue has been a bit less noticeable recently but I checked the replacement parts prices and how to open our phone up.
I think I've fixed the issue by adding one layer of electrical tape over the button-contact. I believe the issue is that the pin a just a little bit too short to reliably properly click the button.
Short tutorial:
Turn the device off and remove the simcard bracket.
It's actually super easy and you don't need to screw or remove anything. Google "Xiaomi MI A2 LITE disassembly screen battery smontaggio" you'll find a video, in the beginning the guy shows how to remove the backcover. I've used a hard, plectrom-looking "opening-pick" at the bottom, then carefully but firmly around the sites. You don't even need to remove the flex cable from the back, just make sure you don't rip it off. Cut off a short bit from the electrical tape, tape it from the battery to the contact, so it doesn't fall off. Close the case again, turn it on and check whether the powerbutton still clicks (doesn't stick) and test the screen lock. Post back if this has worked or if you've tried it.
Click to expand...
Click to collapse
Does anybody have a similar issue?
I've ordered the device from gearbest to Europe. Everything worked nicely.
However, recently when I hit the power button it sometimes triggers the double click interaction and opens my camera. I've tested a few ways to press it slightly from the side, with more force or less. However it will 1/3 times vibrate and start the camera like I had double clicked it, it's more likely when I hit it a bit too lightly though. Could it already be worn out after 2 months? This never happened when the device was new as far as I ran remember.
Yes I'm aware that I could change the camera shortcut but this doesn't stop me from worrying about whether my powerbutton will give out soon.
I was using the phone happily in the case Xiaomi has provided. Dropped the phone once and got a little scratch on the VOL Button but other than that, nothing crazy has happened. Does anyone have a clue whether they will still replace it? I'd gotten it in mid-August.
<message deleted>
Buttons are usually the main gate to "planned obsolescence". I bought this device after my nexus 5 power button started working funny (I physically removed it and worked only with gestures). So, now I try not to press the button unless necessary. I unlock with fingerprint, and lock with Greenify.
In other words. Make sure of it, if the button starts working funny, I'd file a warranty claim. Or it won't last long and warranty will expire eventually. It can happen with this device and with any other piece of tech.
My opinion.
If you do place a warranty claim, let us know how xiaomi's customer service works in Europe.
needhelpgeez said:
Does anybody have a similar issue?
I've ordered the device from gearbest to Europe. Everything worked nicely.
However, recently when I hit the power button it sometimes triggers the double click interaction and opens my camera. I've tested a few ways to press it slightly from the side, with more force or less. However it will 1/3 times vibrate and start the camera like I had double clicked it, it's more likely when I hit it a bit too lightly though. Could it already be worn out after 2 months? This never happened when the device was new as far as I ran remember.
Yes I'm aware that I could change the camera shortcut but this doesn't stop me from worrying about whether my powerbutton will give out soon.
I was using the phone happily in the case Xiaomi has provided. Dropped the phone once and got a little scratch on the VOL Button but other than that, nothing crazy has happened. Does anyone have a clue whether they will still replace it? I'd gotten it in mid-August.
Click to expand...
Click to collapse
when you dropped it
the power button may have got stuck
this is possible and I've seen it on some other devices
you can open it yourself if you don't care for warranty like i do
but the safest option is to claim warranty and yes they would replace it
needhelpgeez said:
Does anybody have a similar issue?
I've ordered the device from gearbest to Europe. Everything worked nicely.
However, recently when I hit the power button it sometimes triggers the double click interaction and opens my camera. I've tested a few ways to press it slightly from the side, with more force or less. However it will 1/3 times vibrate and start the camera like I had double clicked it, it's more likely when I hit it a bit too lightly though. Could it already be worn out after 2 months? This never happened when the device was new as far as I ran remember.
Click to expand...
Click to collapse
I have the exact same issue. It started when I installed the Oreo update, but it could be a coincidence. I'm still looking for a fix.
It also happens to me, and I didn't drop the phone... Is there a way to change the shortcut to, maybe, press the power button 3 times instead of 2?
Enviado desde mi Mi A2 Lite mediante Tapatalk
ovejota said:
It also happens to me, and I didn't drop the phone... Is there a way to change the shortcut to, maybe, press the power button 3 times instead of 2?
Enviado desde mi Mi A2 Lite mediante Tapatalk
Click to expand...
Click to collapse
It happens to me too, I disabled the shortcut and just not using it right now. I don't think there is a way to change the shortcut
It happens to me....
It happened for me as well.
And i think it's a software bug, not hardware..
avi_soft said:
It happened for me as well.
And i think it's a software bug, not hardware..
Click to expand...
Click to collapse
Same here, never crashed on the floor, it's software issue
sinthemau said:
Same here, never crashed on the floor, it's software issue
Click to expand...
Click to collapse
It obviously is not a software issue. This means that they've used cheap contact points on the button if this happens to many of us. This is a hardware issue.
marstonpear said:
It obviously is not a software issue. This means that they've used cheap contact points on the button if this happens to many of us. This is a hardware issue.
Click to expand...
Click to collapse
I'm having this issue since day one. It is obviously software, otherwise the same contact problem would occur when turning the screen ON, but it never happens. Solution is to disable the feature under System -> Gestures -> Jump to camera.
i also dissabled the camera gesture because of this issue.
im sure this is reasoned by a more or less loose power button and not an software issue
fugu5 said:
I'm having this issue since day one. It is obviously software, otherwise the same contact problem would occur when turning the screen ON, but it never happens. Solution is to disable the feature under System -> Gestures -> Jump to camera.
Click to expand...
Click to collapse
How can that be a software issue? Same issue happens to me whenever I use the power button, either to lock the screen or unlock the screen. Also if it was a software issue, it could be fixed via installing a GSI. That doesn't fix it either.
marstonpear said:
How can that be a software issue? Same issue happens to me whenever I use the power button, either to lock the screen or unlock the screen. Also if it was a software issue, it could be fixed via installing a GSI. That doesn't fix it either.
Click to expand...
Click to collapse
Let me break it down and you can tell me if I'm missing something.
1. Many users are reporting that the camera app starts when pushing the power button to turn the screen off.
2. They are not reporting any other issue with the power button, like the camera app starting when they try to turn the screen on, the button being irresponsive, or the camera app NOT starting when they deliberately push the button twice.
3. The problem reportedly goes away if the double-push gesture is turned off in settings.
Do you still think this is a hardware issue?
fugu5 said:
Let me break it down and you can tell me if I'm missing something.
1. Many users are reporting that the camera app starts when pushing the power button to turn the screen off.
2. They are not reporting any other issue with the power button, like the camera app starting when they try to turn the screen on, the button being irresponsive, or the camera app NOT starting when they deliberately push the button twice.
3. The problem reportedly goes away if the double-push gesture is turned off in settings.
Do you still think this is a hardware issue?
Click to expand...
Click to collapse
When I disable double press gesture from Gestures, still when I sometimes hit the power button, the phone locks and closes the screen and then turns the screen on again which means that it still registers one presses sometimes as double presses. Also if you've ever used a keyboard or a mouse or anything electrical with buttons on it, these appliances do the same sometimes even though you tap one button they sometimes register it twice. Which is a hardware issue. I still can't see any software issue here. When you disable the double press gesture, it doesn't launch the camera anymore but it turns on the screen after locking it (sometimes as usual)
marstonpear said:
When I disable double press gesture from Gestures, still when I sometimes hit the power button, the phone locks and closes the screen and then turns the screen on again which means that it still registers one presses sometimes as double presses. Also if you've ever used a keyboard or a mouse or anything electrical with buttons on it, these appliances do the same sometimes even though you tap one button they sometimes register it twice. Which is a hardware issue. I still can't see any software issue here. When you disable the double press gesture, it doesn't launch the camera anymore but it turns on the screen after locking it (sometimes as usual)
Click to expand...
Click to collapse
Not for me, so it's possible that these are actually two different problems with this phone. I wouldn't be surprised. :laugh:
fugu5 said:
Not for me, so it's possible that these are actually two different problems with this phone. I wouldn't be surprised. :laugh:
Click to expand...
Click to collapse
Yeah me neither. They don't look like they're going to fix anything or listen to users either. I'm happy with stock Android though.
Hi guys, for me, the problem has fixed disabling the option "Power button lock the phone", and set the option "Lock automatically": immediately.
The fix
What's up guys, I'm sorry for the late followup. It turned out, that I was too lazy to send it back. Now, almost a year later, I'd gotten into fixing phones and got the courage to open up the device and see what's up with the power button, without disabling the functionality. It felt like the issue has been a bit less noticeable recently but I checked the replacement parts prices and how to open our phone up.
I think I've fixed the issue by adding one layer of electrical tape over the button-contact. I believe the issue is that the pin a just a little bit too short to reliably properly click the button.
Short tutorial:
Turn the device off and remove the simcard bracket.
It's actually super easy and you don't need to screw or remove anything. Google "Xiaomi MI A2 LITE disassembly screen battery smontaggio" you'll find a video, in the beginning the guy shows how to remove the backcover. I've used a hard, plectrom-looking "opening-pick" at the bottom, then carefully but firmly around the sites. You don't even need to remove the flex cable from the back, just make sure you don't rip it off. Cut off a short bit from the electrical tape, tape it from the battery to the contact, so it doesn't fall off. Close the case again, turn it on and check whether the powerbutton still clicks (doesn't stick) and test the screen lock. Post back if this has worked or if you've tried it.
I changed the power/volume button assembly outright just the other day, and so far I'm not getting this issue anymore.
I recorded myself doing it here, so you can see how easy (or hard) it is: https://youtu.be/q8kaY-v0q_Q