Having such a big screen, but having it on 240dip is just a waste for me. And I love the new Sense especially the notifications bar. And just the whole feel of a Sense rom including the messages app and the smart dialer. I don't need the sense homescreen as I use ADW.
But When I lower my DPI to 170 roughly, then I can't link contacts and pretty much all the HTC apps screw up at some point. Was wondering if there was any workaround.
BTW, I need 170DPI because I have a 6x6 homescreen
bump........
I have never had as many scaling problems when changing the DPI as I've had in this phone!
I use the CM7 Nightly's as Sense looks rubbish on anything other than 240, and theres no way I'm using 240.
I used to have a Dell Streak and it scaled everything perfectly from 100-260 DPI. I don't understand why the DHD won't do it, and no one ever seems to give a straight answer.
Even on a non Sense build you still get scaling problems when using a DPI other than 240. There even seems to be problems when using 240DPI! Unfortunately I dont have any screenshots but if I ever come accross it again I'll take some.
Currently I'm using CM7 with a 190DPI. It all depends on the apps you use that won't scale porperly.
You just have to use trial and error. For example you may try 200DPI and there might be 3 apps that dont scale correctly, so you change to 205DPI and you find 2 of the apps scale correctly but then another one pops up that doesn't! The big one for me was the Facebook app, which scales perfectly at 190DPI but not at others.
Take the Facebook app for example (these DPIs are just an example), It won't scale properly at 120-139 but it will scale properly from 140-149, then it wont scale from 150-179 but will from 180-189, then it wont scale from 190-219 but will scale properly from 220-249. There does seem to be some kind of pattern. I guess if you were really anal you could make up a chart of DPIs and apps and tick which apps scale on which DPIs so you could make a good comprimise.
But if you DEFINATELY must have Sense, then I can only presume you'll have to keep at 240DPI.
I posted a similar guide for my Galaxy SII, so I figured I would share the love here. Hopefully this helps out a few folks who want to better utilize the amazing screen on the GSIII. I am manually copying this from my post in the now closed combined GSIII forums. Please feel free to comment and make suggestions and please "thank" if you appreciate the post!
General Info for Beginners:
The Galaxy SIII comes with a gorgeous 4.8 inch, 1280 x 720 (albeit pentile) screen. As great as the screen looks, I couldn't help but feel that there is a lot of "wasted space" at the existing resolution. The best example of this fact is the app drawers default 4 x 5 layout. In my opinion, things look much better when the the icons are a bit smaller and more tightly grouped. For those that feel the same way, there is a simple build.prop edit you can do to "trick" you phone to thinking it is set to a higher resolution
How-To Change the Density Setting:
To accomplish this, all you have to do is change the build.prop setting for "ro.sf.lcd_density". There are multiple programs out there that makes this much easier but I have found the best results with "ROM Toolbox". Feel free to buy the full version to support the dev but if all you are looking to do is change the density setting, the lite version will do just fine.
1. download and install "ROM Toolbox" from the Google Play Store
2. go to the "Performance" tab
3. click "build.prop tweaks"
4. change the "LCD Density" slider to whatever DPI you like
5. reboot
As mentioned, there are multiple programs out there but based on my personal experiences, DO NOT USE "LCD DENSITY MODDER" from the play store. This app is known to cause soft-bricks/bootloops. However, I have been told that LCD Density Modder CAN still help with the Play Store app issue, but you will have to buy the pro version for that feature. Thanks uber_mike! (more on that later)
What Setting to Choose:
This is matter of personal opinion so try out different setups and see what you like best. Remember, the lower you set the number, the smaller your icons/text will appear but will also give you more screen real estate. I suggest starting from about 280 or so and working your way down and find something you like.
You may also notice that text and icons appear less sharp when messing with these settings. Keep in mind that because you are not truly changing your screen resolution, the translation will not be perfect. Personally, given the natural sharpness of AMOLED screens, I think most people while not be bothered by this or even notice.
"Phone Mode" vs "Tablet Mode"
As some posters have reported, going to 240 dpi or below will result in Android thinking your device is a tablet. I have been running 240 for a few days now and I'm loving it. In my opinion, may apps look a lot better in Tablet mode but if there are certain phone only apps you MUST have, please keep this in mind.
Potential Issues and Workarounds:
You will inevitably run into some compatibility issues so here are few final thoughts
Which ROM to use?
TouchWiz-based Roms: All roms based on stock Samsung TW for the GSIII were written with only the native resolution in mind. This means that certain apps and aspects of the OS will not scale well with a higher resolution::
- TouchWiz UX Launcher: If you are dead-set on using the default TW launcher, this mod may not be for you. The proportions will look way off and because you cannot edit things like margin or grid layout, it is not fixable. Aftermarket launchers like Apex handle the conversion much better (more on that later)
- The Phone Dialer: The dialer looks like small box that fills up only a portion of the screen. To resolve, you can use an aftermarket dialer app like "exDialer" from the Play Store
- TW E-mail App: The TW e-mail app (not gmail) also doesn't scale well. You can flash the AOSP version of e-mail as a workaround
- Stock Camera App: You will notice some of the border coloring and margins doesn't scale very well but the functionality is still perfect
- Notification Bar: I have noticed the little lines in the pull-down become off-center after you adjust the dpi. Again, a minor annoyance which doesn't effect functionality
- Twitter:*You may have profile pictures show up in 2 different sizes (Thanks Msilvame!)
Some additional feedback from other posters(thanks mhtruth!) but note that I personally do not have all of these issues
*status bar quick toggles DON'T scroll (stuck with just the 1st 5)
*status bar "remove all (X)" missing (swiping still works)
* in call speaker boost doesn't work...(only stops you from hearing not the person on the other end)
* some apps go into tablet mode (ex. HBO GO)
AOSP ROMs: CM9 and AOKP handle the conversion a bit better. You won't run into the dialer or e-mail issue like with TW ROMs but there are still some bugs.
- Certain pictures of contacts may appear too zoomed in, i.e. messaging notification pictures or the favorites tab
- Other aspects of the OS may become hard to read when scaled down so much, i.e. lock screen add-on buttons, notification pull down buttons
- I recently had a chance to mess with some JB ROMs and found that the lockscreen slider/phone answer slider does not scale well and is oriented towards the right of the screen. Boo
The Play Store Doesn't Show All Apps? - This is the biggest pain in the a$$ when you mess with the lcd density settings. There is a bug in the play store that prevents you from seeing certain apps when you change the lcd settings away from default.
I have seen a few "hacked" versions of the vending.apk out there that makes the play store think you are always set to a stock dpi but for some reason, this only works for a little while. LCD Density Modder Pro has a feature where it can install a "fixed" Play Store app that can help with this issue also, but there is also a workaround.
Here are the steps to get the market working again:
1. Change LCD Density back to stock (320)
2. Reboot to take effect
3. Clear the data for the Google Play Store AND Google Services Framework
4. Open the Play Store app and you should see everything again
5. Change LCD density back to whatever you like.
6. Reboot
I know this is a bit cumbersome but it's the best solution for now. I haven't quite nailed down what triggers the market to "break" but hopefully you won't have to do this fix too often. In opinion, this small annoyance is worth it.
Also, one thing I noticed when using Rom Toolbox is that after you set your dpi to a lower setting using the "build.prop tweaks" menu, if you go back and try to set it to the stock 320, it will max out at 280 or so. Not sure why this is the case but to do this manually, go to "build.prop editor" instead and change the "ro.sf.lcd_density" to 320.
I have been told that setting your dpi to 240 will also help with Play Store issues, since 240 is a stock resolution on other devices (GSII comes to mind). Feel free to try this out, but the size of icons and fonts may be a bit too small for some tastes (thanks DutchDogg54 and chakra!)
Everything Looks Too "Stretched Out"? - Having an aftermarket launcher will help with this tremendously, as the TW launcher does not scale well at all. I personally use Apex Launcher and there are some settings you can change to make the proportions look better
1. Homescreen Settings: Change the Vertical and Horizontal margins to medium or large
2. Dock Settings: Same as above.
You may also want to mess with different homescreen grid configurations now that you have extra room. I have bumped up mine to 5 x 5 and it looks great.
Bumping up the font size can also help even things out. At 240 dpi, I put mine to "normal", but at stock I used "tiny" (thanks falconator!)
List of all the ICS compatible launchers that will work for this mod:
- Apex Launcher (my fave)
- Nova Launcher
- Go Launcher
- Atom Launcher (new!)
- Holo Launcher (new!)
And that's it. I hope this will help you out so that you won't have to go through all the trial and error I did. I promise you, after you do this, it will be impossible for you to go back to the stock resolution (everything looks HUGE)
Update: I have added some of my and mhtruth's screenshots for those who are interested. I also added a screenshot of HBO GO in tablet mode
My setup:
- 240 dpi (Tablet Mode)
- AOKP M6 R3, Black Exodus Theme
- Apex Launcher
- Homescreen: 6 x 5 grid, Horizontal Margin: Medium, Vertical Margin: Large
- Dock: Horizontal Margin: Large, Vertical Margin: Medium
- Font Size: "Normal"
Feel free to show off your own homescreen screenshots! I will update OP and add yours too!
I was just complaining about this to myself this morning. Thank you for sharing this. I'm definitely going to try messing with this.
Sent from my SGH-T999 using xda app-developers app
I find that ROM toolbox is kind of buggy on the GS3.
There use to be an app o the market that did this and it stuck on boot. I hate messing with build prop myself. Someone should whip up a new app.
-me being lazy lol
Sent from my SGH-T999 using xda app-developers app
Update:
Since 8/10 I have been running the AMAZING Paranoid Android ROM and I am in love with this. For anyone who liked the LCD Density Mod posted above, you should definitely check out this ROM. I got to experience it just a bit with my GSII and continue to be impressed with my GSIII.
I suggest you try "Phablet" Mode at first. The advantage to this ROM is that it allows you to individually adjust the density of each app separately as well as prevents market incompatibility issues. This is a MUST for people who like things at a setting other than 240.
Hope this helps!
Stuck in boot
after 3 hours of getting it rooted, i got the density app, i may of gotten the lcd density modder , i didnt know there was 2 kinds. but i put it to 200, rebooted and now i try to turn on and it goes to samsung logo but then just turns off again, what do i do?
Well, if it didnt back up your build.prop then the easiest thing would be to flash a rom.
Or if you have a nandroid restore just the system part.
Otherwise plug up to your computer and oull your build.prop, set it back to default and push it back to system.
Sent from my SGH-T999 using xda app-developers app
I'm running AOKP milestone 1 on my SGSIII, when I change my density I get screen flashes. Is this the incompatibility your talking about? I've tried different DPIs with the same result. I've used the density changer built into ROM control, as well as ROM toolbox, both with the same results. Any help is appreciated. Thanks.
Let me make a few notes:
First, stock ics touchwiz ROMs do not like anything lower than 240. This means any ROM that is touchwiz based off stock ics will result in boot loops.. trust me been there -.-
Secondly, don't waste your money on the LCD density mod app to fix the market. I've already fixed the market. Just flash my zip found [MOD][APP][UPDATE 3.10.10] 320DPI GoogleServicesFramework and google play and you should be golden. Don't have a custom recovery, then extract the files from the zip and use a root file browser to copy them to the system/app directory.
Oh and 240 isn't tablet mode. I'm currently at 210 and it's not tablet mode.. I don't remember what it was.
Sent from my SGH-T999 using Tapatalk 2
So..... Any recommendations on the screen flashing after changing the density?
elterible said:
I posted a similar guide for my Galaxy SII, so I figured I would share the love here. Hopefully this helps out a few folks who want to better utilize the amazing screen on the GSIII. I am manually copying this from my post in the now closed combined GSIII forums. Please feel free to comment and make suggestions and please "thank" if you appreciate the post!
General Info for Beginners:
The Galaxy SIII comes with a gorgeous 4.8 inch, 1280 x 720 (albeit pentile) screen. As great as the screen looks, I couldn't help but feel that there is a lot of "wasted space" at the existing resolution. The best example of this fact is the app drawers default 4 x 5 layout. In my opinion, things look much better when the the icons are a bit smaller and more tightly grouped. For those that feel the same way, there is a simple build.prop edit you can do to "trick" you phone to thinking it is set to a higher resolution
How-To Change the Density Setting:
To accomplish this, all you have to do is change the build.prop setting for "ro.sf.lcd_density". There are multiple programs out there that makes this much easier but I have found the best results with "ROM Toolbox". Feel free to buy the full version to support the dev but if all you are looking to do is change the density setting, the lite version will do just fine.
1. download and install "ROM Toolbox" from the Google Play Store
2. go to the "Performance" tab
3. click "build.prop tweaks"
4. change the "LCD Density" slider to whatever DPI you like
5. reboot
As mentioned, there are multiple programs out there but based on my personal experiences, DO NOT USE "LCD DENSITY MODDER" from the play store. This app is known to cause soft-bricks/bootloops. However, I have been told that LCD Density Modder CAN still help with the Play Store app issue, but you will have to buy the pro version for that feature. Thanks uber_mike! (more on that later)
What Setting to Choose:
This is matter of personal opinion so try out different setups and see what you like best. Remember, the lower you set the number, the smaller your icons/text will appear but will also give you more screen real estate. I suggest starting from about 280 or so and working your way down and find something you like.
You may also notice that text and icons appear less sharp when messing with these settings. Keep in mind that because you are not truly changing your screen resolution, the translation will not be perfect. Personally, given the natural sharpness of AMOLED screens, I think most people while not be bothered by this or even notice.
"Phone Mode" vs "Tablet Mode"
As some posters have reported, going to 240 dpi or below will result in Android thinking your device is a tablet. I have been running 240 for a few days now and I'm loving it. In my opinion, may apps look a lot better in Tablet mode but if there are certain phone only apps you MUST have, please keep this in mind.
Potential Issues and Workarounds:
You will inevitably run into some compatibility issues so here are few final thoughts
Which ROM to use?
TouchWiz-based Roms: All roms based on stock Samsung TW for the GSIII were written with only the native resolution in mind. This means that certain apps and aspects of the OS will not scale well with a higher resolution::
- TouchWiz UX Launcher: If you are dead-set on using the default TW launcher, this mod may not be for you. The proportions will look way off and because you cannot edit things like margin or grid layout, it is not fixable. Aftermarket launchers like Apex handle the conversion much better (more on that later)
- The Phone Dialer: The dialer looks like small box that fills up only a portion of the screen. To resolve, you can use an aftermarket dialer app like "exDialer" from the Play Store
- TW E-mail App: The TW e-mail app (not gmail) also doesn't scale well. You can flash the AOSP version of e-mail as a workaround
- Stock Camera App: You will notice some of the border coloring and margins doesn't scale very well but the functionality is still perfect
- Notification Bar: I have noticed the little lines in the pull-down become off-center after you adjust the dpi. Again, a minor annoyance which doesn't effect functionality
- Twitter:*You may have profile pictures show up in 2 different sizes (Thanks Msilvame!)
Some additional feedback from other posters(thanks mhtruth!) but note that I personally do not have all of these issues
*status bar quick toggles DON'T scroll (stuck with just the 1st 5)
*status bar "remove all (X)" missing (swiping still works)
* in call speaker boost doesn't work...(only stops you from hearing not the person on the other end)
* some apps go into tablet mode (ex. HBO GO)
AOSP ROMs: CM9 and AOKP handle the conversion a bit better. You won't run into the dialer or e-mail issue like with TW ROMs but there are still some bugs.
- Certain pictures of contacts may appear too zoomed in, i.e. messaging notification pictures or the favorites tab
- Other aspects of the OS may become hard to read when scaled down so much, i.e. lock screen add-on buttons, notification pull down buttons
- I recently had a chance to mess with some JB ROMs and found that the lockscreen slider/phone answer slider does not scale well and is oriented towards the right of the screen. Boo
The Play Store Doesn't Show All Apps? - This is the biggest pain in the a$$ when you mess with the lcd density settings. There is a bug in the play store that prevents you from seeing certain apps when you change the lcd settings away from default.
I have seen a few "hacked" versions of the vending.apk out there that makes the play store think you are always set to a stock dpi but for some reason, this only works for a little while. LCD Density Modder Pro has a feature where it can install a "fixed" Play Store app that can help with this issue also, but there is also a workaround.
Here are the steps to get the market working again:
1. Change LCD Density back to stock (320)
2. Reboot to take effect
3. Clear the data for the Google Play Store AND Google Services Framework
4. Open the Play Store app and you should see everything again
5. Change LCD density back to whatever you like.
6. Reboot
I know this is a bit cumbersome but it's the best solution for now. I haven't quite nailed down what triggers the market to "break" but hopefully you won't have to do this fix too often. In opinion, this small annoyance is worth it.
Also, one thing I noticed when using Rom Toolbox is that after you set your dpi to a lower setting using the "build.prop tweaks" menu, if you go back and try to set it to the stock 320, it will max out at 280 or so. Not sure why this is the case but to do this manually, go to "build.prop editor" instead and change the "ro.sf.lcd_density" to 320.
I have been told that setting your dpi to 240 will also help with Play Store issues, since 240 is a stock resolution on other devices (GSII comes to mind). Feel free to try this out, but the size of icons and fonts may be a bit too small for some tastes (thanks DutchDogg54 and chakra!)
Everything Looks Too "Stretched Out"? - Having an aftermarket launcher will help with this tremendously, as the TW launcher does not scale well at all. I personally use Apex Launcher and there are some settings you can change to make the proportions look better
1. Homescreen Settings: Change the Vertical and Horizontal margins to medium or large
2. Dock Settings: Same as above.
You may also want to mess with different homescreen grid configurations now that you have extra room. I have bumped up mine to 5 x 5 and it looks great.
Bumping up the font size can also help even things out. At 240 dpi, I put mine to "normal", but at stock I used "tiny" (thanks falconator!)
List of all the ICS compatible launchers that will work for this mod:
- Apex Launcher (my fave)
- Nova Launcher
- Go Launcher
- Atom Launcher (new!)
- Holo Launcher (new!)
And that's it. I hope this will help you out so that you won't have to go through all the trial and error I did. I promise you, after you do this, it will be impossible for you to go back to the stock resolution (everything looks HUGE)
Update: I have added some of my and mhtruth's screenshots for those who are interested. I also added a screenshot of HBO GO in tablet mode
My setup:
- 240 dpi (Tablet Mode)
- AOKP M6 R3, Black Exodus Theme
- Apex Launcher
- Homescreen: 6 x 5 grid, Horizontal Margin: Medium, Vertical Margin: Large
- Dock: Horizontal Margin: Large, Vertical Margin: Medium
- Font Size: "Normal"
Feel free to show off your own homescreen screenshots! I will update OP and add yours too!
Click to expand...
Click to collapse
Im running a stock rom on a Chinese phone (W9208) and i dont have LCD density...apps dont work either...is there hope for me?
rndm said:
Im running a stock rom on a Chinese phone (W9208) and i dont have LCD density...apps dont work either...is there hope for me?
Click to expand...
Click to collapse
I'm not too familiar with that model. pardon me if this is a stupid question but i'm assuming you mean "stock android"?
if so, then you're fine. download an app that will let you change the LCD density manually in the buildprop (i.e. Rom Toolbox). find the line "ro.sf.lcd_density" and change to whatever you like.
The tricky part here is to find the right number. I wrote this guide a while back for my Galaxy S3, which ran 320 dpi natively at it's 720p resolution. To achieve tablet mode (and retain compatibility with the Google Playstore), I changed it to 240. My current device (nexus 5) runs 1080p which has a stock dpi of 480. To achieve tablet mode, i changed to 320. Does this make sense? Again, it's tricky b/c i'm not sure what resolution your phone is
Well, i hope this helps, good luck!
elterible said:
I'm not too familiar with that model. pardon me if this is a stupid question but i'm assuming you mean "stock android"?
if so, then you're fine. download an app that will let you change the LCD density manually in the buildprop (i.e. Rom Toolbox). find the line "ro.sf.lcd_density" and change to whatever you like.
The tricky part here is to find the right number. I wrote this guide a while back for my Galaxy S3, which ran 320 dpi natively at it's 720p resolution. To achieve tablet mode (and retain compatibility with the Google Playstore), I changed it to 240. My current device (nexus 5) runs 1080p which has a stock dpi of 480. To achieve tablet mode, i changed to 320. Does this make sense? Again, it's tricky b/c i'm not sure what resolution your phone is
Well, i hope this helps, good luck!
Click to expand...
Click to collapse
I wish it was stock android:crying:
Star's (Chinese manufacturer) manipulation of android to copy Samsung's touchwiz.
my device is 720p and has a 6.4 inch screen...hence me wanting to change the dpi...not sure what the dpi currently is but the drop-down status bar toggles labels are squashed.
I rooted and installed loads of dpi apps and none worked. Then I looked for "ro.sf.lcd_density" and realised I don't have one in my build prop. Know any fixes?
rndm said:
I wish it was stock android:crying:
Star's (Chinese manufacturer) manipulation of android to copy Samsung's touchwiz.
my device is 720p and has a 6.4 inch screen...hence me wanting to change the dpi...not sure what the dpi currently is but the drop-down status bar toggles labels are squashed.
I rooted and installed loads of dpi apps and none worked. Then I looked for "ro.sf.lcd_density" and realised I don't have one in my build prop. Know any fixes?
Click to expand...
Click to collapse
you should be able to manually add in the line yourself.
but a word of warning, given that i have no experience with "Star" and no idea what version of android is on there, I would proceed with caution if you do that
since you have it rooted, is there any way you can flash a completely stock custom version of android on there? is there any development support for it here on XDA?
rndm said:
I wish it was stock android:crying:
Star's (Chinese manufacturer) manipulation of android to copy Samsung's touchwiz.
my device is 720p and has a 6.4 inch screen...hence me wanting to change the dpi...not sure what the dpi currently is but the drop-down status bar toggles labels are squashed.
I rooted and installed loads of dpi apps and none worked. Then I looked for "ro.sf.lcd_density" and realised I don't have one in my build prop. Know any fixes?
Click to expand...
Click to collapse
You can use "Build.prop Editor" app and add that entry yourself. That's least painful way.
Perseus71 said:
You can use "Build.prop Editor" app and add that entry yourself. That's least painful way.
Click to expand...
Click to collapse
Great didn't know I could do that, however i might leave it now...
I installed texdroider and I couldn't type any numbers in the dpi change box (probably because it directly edits the lcd density registry, which i didn't have)
Then after that I installed LCD density modder app which put my phone into a bootloop after setting 300dpi
So I assume even after adding the entry I wont have much room to play with anyway?
---------- Post added at 10:37 AM ---------- Previous post was at 10:35 AM ----------
elterible said:
you should be able to manually add in the line yourself.
but a word of warning, given that i have no experience with "Star" and no idea what version of android is on there, I would proceed with caution if you do that
since you have it rooted, is there any way you can flash a completely stock custom version of android on there? is there any development support for it here on XDA?
Click to expand...
Click to collapse
Tried searching Mediatek LCD desnsity change but to no avail. Thanks anyway.
rockyhas said:
after 3 hours of getting it rooted, i got the density app, i may of gotten the lcd density modder , i didnt know there was 2 kinds. but i put it to 200, rebooted and now i try to turn on and it goes to samsung logo but then just turns off again, what do i do?
Click to expand...
Click to collapse
As mentioned, there are multiple programs out there but based on my personal experiences, DO NOT USE "LCD DENSITY MODDER" from the play store. This app is known to cause soft-bricks/bootloops. However, I have been told that LCD Density Modder CAN still help with the Play Store app issue, but you will have to buy the pro version for that feature. Thanks uber_mike! (more on that later)
Click to expand...
Click to collapse
You're screwed. Do a reset.
I did the LCD changes through playstore i ddint see this thread and now my phone logo comes but black screen after hard rest nothing working help HTc Sensation xl
Day 2 with my stock (for now) S8.4.
The first thing I did was to download the Google Now launcher, and I was struck by how odd it looks. The Google Search bar is very narrow, and the cards on the Now screen are small and centered on the page, rather than being edge-to-edge as they are on my phone and my old Nexus 7 tablet. Then I started noticing in a number of other apps that fonts are very small, or that there are large amounts of wasted white space.
I can only guess that this is due to the screen resolution, and I understand older apps designed for phones don't scale up properly. But c'mon Google -- really? It's not like you don't have a couple of larger tablets out there already.
Not ready to root this tablet yet; I'm going to sit back and wait for Lollipop to come along and bring a host of new headaches and issues... But the question is am I the only one using the Now launcher (love the left swipe to Google Now!) that realizes it -- and other apps -- look funny? And is there any non-root solution that may help increase the DPI?
Yes, Samsung has messed up DPI. Their apps don't work with it, therefore they put wrong DPI. Solution: root, xposed module, set DPI for each App individually. See several threads regarding DPI.
Yup, I was afraid that was the only answer. Sigh... Really takes the shine off my shiny new toy!
Hi all,
i am new to this forum. having been using my tab s 8.4 for a few months and i rooted it at last for performance sake.
feeling good~
and at the same time, i found out that font size is really too small for me, not an old man. therefore i use Resolution Charger to change the master dpi. (not going to use Xposed for individual apps... just want to do a simple job)
after changing from default 320dpi to 420dpi, the look is much better and i know that the samsung apps have foreclose problem but i don't mind as i have already deleted most of them~
but moving up from 420dpi (some apps are still have too small fonts) , i can't even go into settings (need to revert to 420dpi or default dpi) which causes some troubles.
do u have any "optimum" large font dpi for T700/705? say something around 500dpi?
thank you!
alhtc said:
Hi all,
i am new to this forum. having been using my tab s 8.4 for a few months and i rooted it at last for performance sake.
feeling good~
and at the same time, i found out that font size is really too small for me, not an old man. therefore i use Resolution Charger to change the master dpi. (not going to use Xposed for individual apps... just want to do a simple job)
after changing from default 320dpi to 420dpi, the look is much better and i know that the samsung apps have foreclose problem but i don't mind as i have already deleted most of them~
but moving up from 420dpi (some apps are still have too small fonts) , i can't even go into settings (need to revert to 420dpi or default dpi) which causes some troubles.
do u have any "optimum" large font dpi for T700/705? say something around 500dpi?
thank you!
Click to expand...
Click to collapse
the only way is using any AOSP/CM base firmware. Which right know the development are still in alpha stage but its working. Its hard to do it on stock samsung since most of the size are hardcode in the system itself. 420 on those aosp/cm rom are big enough when i test and that is before you change the font size.