Develop Bugs

HTC Desire Wi-Fi Problem

Had a wi-fi problem on my htc desire for a while now..
One time I went to turn wi-fi on and it just said "Unable to start wi-fi". It had worked totally fine up until that point.
I've tried doing a factory reset, rooted, updated rom but it's still not working.
When the problem happened I had not rooted the phone or changed anything really.. it just happened.
In logcat it says:
flg=0x10200000 cmp=com.android.settings/.wifi.WifiSettings bnds=[124,404][236,531] }
D/SettingsWifiEnabler( 548): Received wifi state changed from Enabling to Unknown
W/SyncAllWidget( 151): activeSynch is null false
I/ActivityManager( 79): Displayed activity com.android.settings/.wifi.WifiSettings: 495 ms (total 495 ms)
I/WifiHW ( 79): wifi_load_driver enter
D/SettingsWifiEnabler( 548): Received wifi state changed from Unknown to Enabling
D/dalvikvm( 1805): GC freed 3806 objects / 257536 bytes in 97ms
D/NetworkLocationProvider( 79): onCellLocationChanged [1363,22890]
I/WifiHW ( 79): wifi_load_driver end error 2
E/WifiService( 79): Failed to load Wi-Fi driver.
D/SettingsWifiEnabler( 548): Received wifi state changed from Enabling to Unknown
Anyone got any ideas on how to fix this?
Setting a static IP fixed it temporarily but now it doesn't work again.

Question about git repository

Hello everyone..
I want to learn about starting development,
so for the first step I'd like to try compiling a fresh froyo and
I've followed the instruction from Fresh froyo thread
But, I have a problem,
each time I do "repo sync", the process is never successfully finished.
I always get these error mesages :
Code:
remote: Counting objects: 1405995, done.
remote: Compressing objects: 100% (265573/265573), done.
fatal: The remote end hung up unexpectedly352.01 MiB | 46 KiB/s
fatal: early EOF
fatal: index-pack failed
error: Cannot fetch kernel
I've tried again several times but the remote always hung up unexpectedly when the download process is around 350~390MB.
Is this because of my internet connection or do I missed something?
what can I do to make this works?
Please help me
Thank you..

I've never seen exactly that, but sometimes I get network failures. Try again?
When it says "Fetching projects: xx% (yy/154)", how far does it get?
To the kernel, presumably, based on the error message. That's like 102/154 or something around there.

wifi.wpa_supp_ready permission denied

Hi
i've tested many sandvold ics roms from early versions, and from the early on i had problems with wifi. wifi turns on but it can't search for networks, and even when i give the SSID and password manually, it can't connect to it.
today i had a search into the dmesg of device. you can check my dmesg there. there is an interesting line in it:
Code:
<3>[ 54.330230] init: sys_prop: permission denied uid:1010 name:wifi.wpa_supp_ready
this message repeats in the dmesg. and it is followed by this message:
Code:
<4>[ 164.142272] Set ISCAN for wl_iw_combined_scan_set failed with -22
what is the meaning of these errors? and how can i fix them?
thanx

[Q] Bluetooth enable failure

I have a rooted HTC Desire, running Cron Mod-1.0.7.
Ever since I rooted it whatever OS I install there is no bluetooth, I even tried reflashing the stock RUU for it but that didn't work.
I did some research on this page, and decided to update the radio to 32.49.00.32U_5.11.01.27, and have tried a few different RIL versions. All have done nothing.
So I ran a log while trying to enable bt, and discovered that this happens:
"E/bluedroid( 1010): bt_enable: Timeout waiting for HCI device to come up"
So i then ran this:
"$su
# bluetoothd -n
bluetoothd[4428]: Bluetooth deamon 4.69
bluetoothd[4428]: Starting SDP server
bluetoothd[4428]: opening L2CAP socket: Operation not permitted
bluetoothd[4428]: Server initialization failed
bluetoothd[4428]: Can't open HCI socket: Operation not permitted (1)
bluetoothd[4428]: adapter_ops_setup failed
#"
I then ran "#strace bluetoothd -nd" and have a very large output file. I can post if it would be helpful.
But basically the output was that permission was denied opening a few files (/ect/bluetooth/main.conf; /dev/kmsg; /dev/socket/dbus).
Does anyone have any ideas about what the problem is and how to fix it?
Any help will be appreciated!

[CLOSED] Standalone keep alive script attacking my command manifest. HELP? Hacked

Locked me out of STDin on adb and and tty and changed my libfs64.so to another destination. So I'm running out of options.
adb pair 192.168.0.1:5037
* daemon not running; starting now at tcp:5037
ADB server didn't ACK
Full server startup log: /data/user/0/com.github.standardadb/cache/adb.10600.log
Server had pid: 24563
--- adb starting (pid 24563) ---
adb I 04-07 11:00:57 24563 24563 main.cpp:63] Android Debug Bridge version 1.0.41
adb I 04-07 11:00:57 24563 24563 main.cpp:63] Version 31.0.3p1-android-tools
adb I 04-07 11:00:57 24563 24563 main.cpp:63] Installed as /data/app/~~x9Yjf_NXboB57BGltSn3LQ==/com.github.standardadb-5k6iLgDWIncOskTOBYobtQ==/lib/arm64/libfs64.so
adb I 04-07 11:00:57 24563 24563 main.cpp:63]
adb F 04-07 11:00:57 24549 24549 main.cpp:155] could not install *smartsocket* listener: Address already in use
adb F 04-07 11:00:57 24561 24561 main.cpp:155] could not install *smartsocket* listener: Address already in use
adb F 04-07 11:00:57 24563 24563 main.cpp:155] could not install *smartsocket* listener: Address already in use
* failed to start daemon
error: cannot connect to daemon
Enter pairing code:
adb
* daemon not running; starting now at tcp:5037
ADB server didn't ACK
Full server startup log: /data/user/0/com.github.standardadb/cache/adb.10600.log
Server had pid: 24734
--- adb starting (pid 24734) ---
adb I 04-07 11:01:00 24734 24734 main.cpp:63] Android Debug Bridge version 1.0.41
adb I 04-07 11:01:00 24734 24734 main.cpp:63] Version 31.0.3p1-android-tools
adb I 04-07 11:01:00 24734 24734 main.cpp:63] Installed as /data/app/~~x9Yjf_NXboB57BGltSn3LQ==/com.github.standardadb-5k6iLgDWIncOskTOBYobtQ==/lib/arm64/libfs64.so
adb I 04-07 11:01:00 24734 24734 main.cpp:63]
adb F 04-07 11:01:00 24734 24734 main.cpp:155] could not install *smartsocket* listener: Address already in use
* failed to start daemon
error: cannot connect to daemon
adb
Android Debug Bridge version 1.0.41
Version 31.0.3p1-android-tools
Installed as /data/app/~~x9Yjf_NXboB57BGltSn3LQ==/com.github.standardadb-5k6iLgDWIncOskTOBYobtQ==/lib/arm64/libfs64.so
global options:
-a listen on all network interfaces, not just localhost
-d use USB device (error if multiple devices connected)
-e use TCP/IP device (error if multiple TCP/IP devices available)
-s SERIAL use device with given serial (overrides $ANDROID_SERIAL)
-t ID use device with given transport id
-H name of adb server host [default=localhost]
-P port of adb server [default=5037]
-L SOCKET listen on given socket for adb server [default=tcp:localhost:5037]
general commands:
devices [-l] list connected devices (-l for long output)
help show this help message
version show version num
networking:
connect HOST[ORT] connect to a device via TCP/IP [default port=5555]
disconnect [HOST[ORT]]
disconnect from given TCP/IP device [default port=5555], or all
pair HOST[ORT] [PAIRING CODE]
pair with a device for secure TCP/IP communication
forward --list list all forward socket connections
forward [--no-rebind] LOCAL REMOTE
forward socket connection using:
tcp:<port> (<local> may be "tcp:0" to pick any open port)
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
vsock:<CID>:<port> (remote only)
acceptfd:<fd> (listen only)
forward --remove LOCAL remove specific forward socket connection
forward --remove-all remove all forward socket connections
ppp TTY [PARAMETER...] run PPP over USB
reverse --list list all reverse socket connections from device
reverse [--no-rebind] REMOTE LOCAL
reverse socket connection using:
tcp:<port> (<remote> may be "tcp:0" to pick any open port)
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
reverse --remove REMOTE remove specific reverse socket connection
reverse --remove-all remove all reverse socket connections from device
mdns check check if mdns discovery is available
mdns services list all discovered services
file transfer:
push [--sync] [-z ALGORITHM] [-Z] LOCAL... REMOTE
copy local files/directories to device
--sync: only push files that are newer on the host than the device
-n: dry run: push files to device without storing to the filesystem
-z: enable compression with a specified algorithm (any, none, brotli)
-Z: disable compression
pull [-a] [-z ALGORITHM] [-Z] REMOTE... LOCAL
copy files/dirs from device
-a: preserve file timestamp and mode
-z: enable compression with a specified algorithm (any, none, brotli)
-Z: disable compression
sync [-l] [-z ALGORITHM] [-Z] [all|data|odm|oem|product|system|system_ext|vendor]
sync a local build from $ANDROID_PRODUCT_OUT to the device (default all)
-n: dry run: push files to device without storing to the filesystem
-l: list files that would be copied, but don't copy them
-z: enable compression with a specified algorithm (any, none, brotli)
-Z: disable compression
shell:
shell [-e ESCAPE] [-n] [-Tt] [-x] [COMMAND...]
run remote shell command (interactive shell if no command given)
-e: choose escape character, or "none"; default '~'
-n: don't read from stdin
-T: disable pty allocation
-t: allocate a pty if on a tty (-tt: force pty allocation)
-x: disable remote exit codes and stdout/stderr separation
emu COMMAND run emulator console command
app installation (see also `adb shell cmd package help`):
install [-lrtsdg] [--instant] PACKAGE
push a single package to the device and install it
install-multiple [-lrtsdpg] [--instant] PACKAGE...
push multiple APKs to the device for a single package and install them
install-multi-package [-lrtsdpg] [--instant] PACKAGE...
push one or more packages to the device and install them atomically
-r: replace existing application
-t: allow test packages
-d: allow version code downgrade (debuggable packages only)
-p: partial application install (install-multiple only)
-g: grant all runtime permissions
--abi ABI: override platform's default ABI
--instant: cause the app to be installed as an ephemeral install app
--no-streaming: always push APK to device and invoke Package Manager as separate steps
--streaming: force streaming APK directly into Package Manager
--fastdeploy: use fast deploy
--no-fastdeploy: prevent use of fast deploy
--force-agent: force update of deployment agent when using fast deploy
--date-check-agent: update deployment agent when local version is newer and using fast deploy
--version-check-agent: update deployment agent when local version has different version code and using fast deploy
--local-agent: locate agent files from local source build (instead of SDK location)
(See also `adb shell pm help` for more options.)
uninstall [-k] PACKAGE
remove this app package from the device
'-k': keep the data and cache directories
debugging:
bugreport [PATH]
write bugreport to given PATH [default=bugreport.zip];
if PATH is a directory, the bug report is saved in that directory.
devices that don't support zipped bug reports output to stdout.
jdwp list pids of processes hosting a JDWP transport
logcat show device log (logcat --help for more)
security:
disable-verity disable dm-verity checking on userdebug builds
enable-verity re-enable dm-verity checking on userdebug builds
keygen FILE
generate adb public/private key; private key stored in FILE,
scripting:
wait-for[-TRANSPORT]-STATE...
wait for device to be in a given state
STATE: device, recovery, rescue, sideload, bootloader, or disconnect
TRANSPORT: usb, local, or any [default=any]
get-state print offline | bootloader | device
get-serialno print <serial-number>
get-devpath print <device-path>
remount [-R]
remount partitions read-write. if a reboot is required, -R will
will automatically reboot the device.
reboot [bootloader|recovery|sideload|sideload-auto-reboot]
reboot the device; defaults to booting system image but
supports bootloader and recovery too. sideload reboots
into recovery and automatically starts sideload mode,
sideload-auto-reboot is the same but reboots after sideloading.
sideload OTAPACKAGE sideload the given full OTA package
root restart adbd with root permissions
unroot restart adbd without root permissions
usb restart adbd listening on USB
tcpip PORT restart adbd listening on TCP on PORT
internal debugging:
start-server ensure that there is a server running
kill-server kill the server if it is running
reconnect kick connection from host side to force reconnect
reconnect device kick connection from device side to force reconnect
reconnect offline reset offline/unauthorized devices to force reconnect
usb:
attach attach a detached USB device
detach detach from a USB device to allow use by other processes
environment variables:
$ADB_TRACE
comma-separated list of debug info to log:
all,adb,sockets,packets,rwx,usb,sync,sysdeps,transport,jdwp
$ADB_VENDOR_KEYS colon-separated list of keys (files or directories)
$ANDROID_SERIAL serial number to connect to (see -s)
$ANDROID_LOG_TAGS tags to be used by logcat (see logcat --help)
$ADB_LOCAL_TRANSPORT_MAX_PORT max emulator scan port (default 5585, 16 emus)
$ADB_MDNS_AUTO_CONNECT comma-separated list of mdns services to allow auto-connect (default adb-tls-conne

t0inK said:
Locked me out of STDin on adb and and tty and changed my libfs64.so to another destination. So I'm running out of options.
Click to expand...
Click to collapse
@t0inK Thread closed as duplicate of
Adb wont work. Lib64 moved. Wont read from stdin. Manifest overwrite, rewrite hack.
Here are the most important parts. Literally every command has been changed to lock me out from making ANY move possible to break free of this hacker . He's checked every back door. "reboot the device; defaults to booting system image but...
forum.xda-developers.com
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator