Develop Bugs

[MOD / HACK] - Fully enable native wifi hotspot AND native Bluetooth tethering

All credits of this hack goes to electron73 from THIS post.
Thanks to DrDrrae for the CWM zip
This will remove all entitlement checks on the native wifi hotspot app and will enable the native Bluetooth tethering option which was removed by at&t.
*** I take no responsibility if this process bricks your device. please read the process CAREFULLY before attempting this***
***THIS IS ONLY FOR I747UCALEM BUILD. THIS WILL NOT WORK ON ANY OTHER BUILD AND WILL PREVENT YOUR DEVICE FROM BOOTING***
This process will prevent your device from booting if something goes wrong. Please make sure you do a nandroid backup BEFORE you do this. If you get stuck you will be able to restore.
What you need:
1) rooted device on the UCALEM build.
2) CWM installed
3) The below CWM flashable zip
How to install:
1) Do a nandroid backup - this is a must as we don't have an ODIN restore yet.
2) Download the below modified flashable zip and place it on your internal SD.
3) Reboot into recovery and flash the zip file
4) Done
5) You might need to re-login to your google account after doing this,
If your device does not boot after changing the file, restore from a nandroid backup and you should be fine.
LINK to CWM flashable zip: http://www.mediafire.com/?z198wxjqhexqqhy
NEW: Link to CWM flashable zip with Cell standby fix: http://www.mediafire.com/?vsepya1lkgud8nt
Enjoy!

Wouldn't it be easier to just do this all through CWM with ADB? Thus no force closes or anything.
EDIT: As I look at the instructions on the original post, he states it's easiest to do it that way also. I'd recommend simplifying such and just doing the instructions for CWM. This will reduce bricks, though if someone can make this into a CWM flashable zip it would be even easier. Live modding files isn't always the best thing to do.
Those instructions are
1) Boot into CWM
2) Go to Mounts and Storage
3) Mount /system
4) Start following the instructions from 4
clubtech said:
All credit of this hack goes to electron73 from THIS post
This will remove all entitlement checks on the native wifi hotspot app and will enable the native Bluetooth tethering option which was removed by at&t.
*** I take no responsibility if this process bricks your device. please read the process CAREFULLY before attempting this***
***THIS IS ONLY FOR I747UCALEM BUILD. THIS WILL NOT WORK ON ANY OTHER BUILD AND WILL PREVENT YOUR DEVICE FROM BOOTING***
This process will prevent your device from booting if something goes wrong. Please make sure you do a nandroid backup BEFORE you do this. If you get stuck you will be able to restore.
What you need:
1) rooted device on the UCALEM build.
2) root explorer or any other file manager with root access.
3) The below modified framework-res.apk
How to install:
1) Do a nandroid backup - this is a must as we don't have an ODIN restore yet.
2) Download the below modified framework-res.apk and place it on your SD card.
3) With root explorer go to your SD card and copy the framework-res.apk file
4) Navigate to /system/framework. Mount the file system as RW
5) Rename the current framework-res.apk in this folder to framework-res.apk.bak and quickly paste the framework-res.apk you have copied in step 2 (this must be done QUICKLY as you will get tons of force closes making your device unusbale so copy the framework-res.apk file BEFORE you rename the current file so you will be ready to simply paste the new file right after you rename the current file)
6) After you have pasted the new framework-res.apk you will get a lot of force closes. relax. reboot the device.
7) the device will boot and you will have free wifi and bluetooth tethering.
8) you will need to re-login to your google account after doing this.
If your device does not boot after changing the file, you have done something wrong (probably not copying the new framework file fast enough). restore from a nandroid backup and you should be fine.
LINK to the modified file: http://www.mediafire.com/?ccbnfyl557ea01d
Enjoy!
Click to expand...
Click to collapse

I was not able to get ADB working with our version of CWM.
If someone can make this a flashable ZIP that would be perfect. I don't know how to do create one.

clubtech said:
I was not able to get ADB working with our version of CWM.
If someone can make this a flashable ZIP that would be perfect. I don't know how to do create one.
Click to expand...
Click to collapse
Ah ****, you are right....ADB doesn't work through CWM.....didn't notice that. Just a slight niggle. Either we need ADB working through CWM or get this as a flashable Zip.

Here's a CWM flashable zip.
http://www.mediafire.com/?z198wxjqhexqqhy

DrDrrae said:
Here's a CWM flashable zip.
http://www.mediafire.com/?z198wxjqhexqqhy
Click to expand...
Click to collapse
Thanks!
If someone can please confirm this is working for him with CWM i'll update the first post.

Flashed cwm zip, tethering worked fine
Sent from my SAMSUNG-SGH-I747 using xda premium

It would be nice to have this mode flash able via recovery then going through all these steps.
Sent from my SAMSUNG-SGH-I747 using xda premium

Worked like a charm! Thanks!

Tethering zip
Worked for me. No issues at all.

OP updated for the CWM method.

CWM flash worked flawlessly. Great job.
Sent from my SAMSUNG-SGH-I747 using xda premium

My version is I747UCLEM... is this different than the I747UCALEM version listed in the OP?
sigh... nm... I scrolled the rest of the way down and see build number is different from baseband version...

Thanks for this!

Awesome. I'll be putting this in my next Rom with thanks back To you!!
Sent from my SAMSUNG-SGH-I747 using xda premium

Worked great - thanks. Only I did not need to re-login to my Google account.

amerikian said:
Worked great - thanks. Only I did not need to re-login to my Google account.
Click to expand...
Click to collapse
Plus one
Thanks
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

amerikian said:
Worked great - thanks. Only I did not need to re-login to my Google account.
Click to expand...
Click to collapse
I think that only happens if you push it while the booted in Android.

Flashed to my I747. Worked like a charm. All three (USB, BT, Wi-Fi) tethering working well.

Flashed to my I747 and it worked great, tethering is working great.

how to make crt off animation work? DYI calling all DEVS :)

Howdy saudis! lol JK ok so I am on a stock rooted 4.04 ICS Deodexed ROM blablhahahblah and decided to use that because none of these DEVS can get the LED lights to work on the bottom consistently, no offense just saying. Except for AOKP, but i no like. anyways so im wondering is there a flashable.zip for CRT off animation, or is there anyway i can do it myself? im willing to learn if someone can point me in the right direction... all i find on google is stuff for the galaxy ATT version and i tried doing it that way and almost destroyed my phone!
so yea if someone can point me in the right direction or if theres a flashable.zip for this version of galaxys2 that would be awesome!
thanks!

abesgs2 said:
Howdy saudis! lol JK ok so I am on a stock rooted 4.04 ICS Deodexed ROM blablhahahblah and decided to use that because none of these DEVS can get the LED lights to work on the bottom consistently, no offense just saying. Except for AOKP, but i no like. anyways so im wondering is there a flashable.zip for CRT off animation, or is there anyway i can do it myself? im willing to learn if someone can point me in the right direction... all i find on google is stuff for the galaxy ATT version and i tried doing it that way and almost destroyed my phone!
so yea if someone can point me in the right direction or if theres a flashable.zip for this version of galaxys2 that would be awesome!
thanks!
Click to expand...
Click to collapse
That would be awesome... By the way to congrats on getting the stock 4.0.4 Deodexed... I been trying to do it as well, but everywhere I search it points me to a script called xUltimate but it get errors starting from step 3

gypsy214 said:
That would be awesome... By the way to congrats on getting the stock 4.0.4 Deodexed... I been trying to do it as well, but everywhere I search it points me to a script called xUltimate but it get errors starting from step 3
Click to expand...
Click to collapse
HEY! well i flashed this ROM thanks to him!! http://forum.xda-developers.com/showthread.php?t=1858435
scroll down a bit to the CWM/TWRP part and download that link via computer then put it on your phone and from there its happy flashing! works like a charm! I JUST switched to and ODEXED version the new BEASTMADE ROM and its actually really good!! thanks to him too lol its odexed but super light and fast as hell! smooth and buttery too.
but if you wont stock 4.04 just follow that link and its there, its also rooted so you dont lose root thats a good thing too
its this part in there. all credit goes to him and whoever he mentioned! not kanging anything folks just spreading the word :laugh:
(TWRP/CWM)
T989_UVLH1 Stock Rom (TWRP/CWM):
-- Deodexed
-- Rooted
-- Busybox, zipaligned
T989_UVLH1 Stock Rom (TWRP/CWM)
Working UVLH1 15 Toggles by Rushing thank to him:
http://forum.xda-developers.com/show....php?t=1882857
Installing a CWM zip file ROM(Custom ROM) for the newbies:
1. The first thing you need to do is download the ROM you want to install.
2. Move the file to a folder on your phone's SDcard (or download it directly to your phone, combining steps 1 and 2).
3. Boot into CWM by:
-- Power off the device or restart/reboot.
-- During initial reboot hold down the Volume Up and Volume Down until the phone vibrates.
4. Select wipe data/factory reset. This will wipe your /system and /data. You should also format your /cache under the mounts and storage options.
5. Navigate back to the main menu.
6. Select install zip from sdcard.
7. Select choose zip from sdcard.
8. Navigate to the folder you placed the ROM zip in.
9. Select the ROM zip file.
10. Navigate to Yes - Install (name of file), and select it.
11. This will install your ROM
12. When it is done reboot your phone.
There may be special instructions for specific ROMs (like flashing gapps for CM10, AOKP), just follow the instructions listed in the thread for that ROM. If you have questions about a specific ROM it is best to ask them in the thread for that ROM.

[HOWTO] Install CM10 from Stock for Captivate Glide

BEFORE YOU START. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR DATA LOSS ANY OF THESE STEPS MAY CAUSE. ALWAYS FLASH AT YOUR OWN RISK.
Note: Suggestions, comments & questions are welcome. Will improve as much as needed.
1. BACKUP. There are many apps you can find to backup any data. Backup all data you'll want to keep until you're 100% satisfied then move it to a folder on your PC. Personally, I use Titanium Backup Pro and backup everything to Google Drive.
2. DOWNLOAD. A GB kernel, rooted AT&T ROM/Rogers ROM, stock ICS leak, CWM, and then go to the CM10 thread and grab the latest build of the ROM & Gapps. So you should have 6 files total. To make your life easier, put them all in 1 folder.
3. ROOT. Turn off your phone. Hold the top part of the volume rocker and turn on the phone. It should boot into download mode if done correctly. Connect phone to PC via USB. On your PC, install & open Odin. Click on PDA and locate your GB kernel. Then click start & wait. If successful, you should see green and you'll be rooted. I believe whenever you use ODIN, it is called a 'flash.' I hope someone will correct me if I'm wrong. Anyway, go back into download mode and now place the rooted ROM in the PDA section followed by clicking start again. When the phone is done booting, go to the Play store and get Superuser app. This allows you to give permission to operations that require root. Make sure it is updated!
4. CLEAN. Now you'll want to wipe your phone to minimize the chances of anything going wrong. Instead of holding the top part of the volume rocker, you'll hold the bottom. Then hold it as you start the phone. This is the stock recovery menu. I don't remember precisely what the options are called but you will want to wipe cache, dalvik, data and system.
5. UPDATE OS. Time to open up that stock ICS leak. When open, it should appear similar to Odin. Make sure your phone is in download mode again, connected via USB and click start again. You'll notice that your phone might take a while to boot up. It'll be updating files and apps so be patient.
6. CWMR. After it's all booted up, time to go back to download mode again. In ODIN, you'll want to click on PDA again and this time flash the CWMR file. Click start and you're done in no time. CWMR replaces stock recovery with the same options plus extra goodies.
7. CLEAN AGAIN. Now you'll want to turn off your phone and boot the phone holding the bottom of the rocker. You'll boot into CWMR. Time to wipe and format again. You'll find the first 2 wipe options on the first page. The wiping of dalvik cache will be in the ADVANCED menu. Then you'll want to go into the MOUNTS AND STORAGE menu. Format system, cache & data.
8. CM10. Now while still in CWMR, you'll need to go into the MOUNTS AND STORAGE menu and select MOUNT USB STORAGE. You'll want to connect your phone to your PC with the USB. Place the CM10 and Gapps files in the main directory of your PHONE'S INTERNAL STORAGE. Select UNMOUNT on your phone, disconnect from USB and now you'll want to go to the option INSTALL ZIP FROM SDCARD.. then go to the CHOOSE.. option and select the final fruit of your labor, CM10. When it's done doing it's thing, REBOOT SYSTEM. Be patient and let everything load.
9. GAPPS. After everything has loaded, you want to turn off the phone and boot into CWMR one last time. Go to INSTALL ZIP FROM SDCARD, CHOOSE ZIP and flash that Gapps file. Then REBOOT SYSTEM.
10. RESTORE. Reinstall the app you used to backup your stuff, move your backup files you put on the PC back to it's rightful place and restore. You should be good to go.
Credits in no special order:
dman3285 (CM10)
CarpeNoctem (Root Guide)
ardatdat (Kernel)
designgears (Stock ICS Leak)
utkanos (CWMR 5.0.2.7)

Someone said doing this is a good idea so..

rogernizzLe said:
Someone said doing this is a good idea so..
Click to expand...
Click to collapse
You've made the same mistake as in your previous post. Step 6 for cleaning up the phone should be after you copy the cm10 and gapps to internal storage or otherwise from cwmr you'll have to mount storage and then copy the files from your comp. If you format system then you won't be able to boot at all.
And after the copy you can do all the format and cleaning and install cm10 and then gapps together and reboot finally.
This guide would be a good help to the new users. Hopefully you can incorporate the changes to correct it.
Sent from my SGH-I927

ninthsense said:
You've made the same mistake as in your previous post. Step 6 for cleaning up the phone should be after you copy the cm10 and gapps to internal storage or otherwise from cwmr you'll have to mount storage and then copy the files from your comp. If you format system then you won't be able to boot at all.
And after the copy you can do all the format and cleaning and install cm10 and then gapps together and reboot finally.
This guide would be a good help to the new users. Hopefully you can incorporate the changes to correct it.
Sent from my SGH-I927
Click to expand...
Click to collapse
Sorry, really wanted to play AC3. Fix'd the cleaning stage. I realized I actually did mount the storage. Looks okay, I hope?

Hey, I followed these steps and it worked.
Didn't run into any major problems, except for having to download the CM10 file using my phone itself, I couldn't download it from my computer (found this out in the CM10 post, pg 29).
It really helps to follow OPs instructions, but also read up on all of the individual threads he links to before actually doing anything.
Thanks rogernizzLe!

Glad it helped. Enjoy!

So all the features of the phone works? Physical keyboard, 3G, GPS, WiFi?

Do you have to use the 1 click?
I have ICS installed via CLock work Mod and Have the Lite Kernel.
Should I not just be able to install JB from Clock work mod? I have never used the 1 click installer but I am on ICS with an ICS Kernel.
Waiting for everything to work before I flash JB. Heard there were still issues with the camera.

r0bot said:
So all the features of the phone works? Physical keyboard, 3G, GPS, WiFi?
Click to expand...
Click to collapse
For a list of what works in the CM10 ROM, check it's thread's OP. dman updates it as bugs are being fixed/found.
dudejb said:
Do you have to use the 1 click?
I have ICS installed via CLock work Mod and Have the Lite Kernel.
Should I not just be able to install JB from Clock work mod? I have never used the 1 click installer but I am on ICS with an ICS Kernel.
Waiting for everything to work before I flash JB. Heard there were still issues with the camera.
Click to expand...
Click to collapse
The method is how I got to JB. There's probably other ways but this worked for me. And yes, currently camera doesn't work.

If I may suggest ... some post updates would be useful ...
Post #1:
rogernizzLe said:
... and then go to the CM10 thread ...
Click to expand...
Click to collapse
- could you update with a link to the thread? (There are so many!)
Post #2:
rogernizzLe said:
Someone said doing this is a good idea so..
Click to expand...
Click to collapse
- didn't and don't understand this at the time.
- perhaps a "(reserving a message slot)" in the middle would clarify.
- my guess was, this post was saying doing the things in post 1 was a good idea.
- only later did I realize you were probably referring to the reservation of the message slot.
Post #9:
rogernizzLe said:
... For a list of what works in the CM10 ROM, check it's thread's OP. dman updates it as bugs are being fixed/found. ...
Click to expand...
Click to collapse
- a link to the thread you mean, for later readers, would also be useful here.

thx so much
it's really helpful for a fisher like me

[ROM][FL04][JB][Dedoxed] Kobridge's Tweaked Stock ROM + Addons + 4 tweak modes

What is this?
This ROM is completely FL04 JB stock ROM with rooted, busybox added with my latest Kobridge Tweak v4.0SF.
How to Flash?
Before flashing this ROM, be sure that you have a nandroid backup available or make a new nandroid backup. Flash this ROM at your own risk, I'm not responsible for any damages on your phone!
The steps are same as other ROMs. You'll need a CWM recovery kernel to flash this ROM and after flashing this ROM, you will lose the CWM recovery kernel because this ROM replace the CWM recovery kernel with stock FL04 kernel.
You will also need to flash the FL04 modem zip file (separate link provided) while flashing this ROM because it's known that ICS modem does not work on JB ROM.
No Data Wipe - if you want to keep your current manually installed non-stock apps, do not wipe the data partition. You would be able to use your old configuration in most cases. I used this option to upgrade my rom from FI25 to FL04. No issues found.
Data Wipe/Factory reset - it's also ok doing factory reset or wiping data partition using CWM recovery tool before flashing this ROM if you want to do a clean install. There's no reboot or force closing issue.
Download Link
Kobridge's Tweaked Stock rooted FL04 ROM v1.0 - download it from here
Download FL04 Kernel & Modem
Stock Kernel - FL04 Kernel
Stock Modem - FL04 Modem
To download the old version, please check the post# 4 below.
Do you want to remove the bloatware apps after flashing the stock rom?
Check out post# 2 below
Kobridge's Addons
Check out Post# 3 below
What if I want to use different Kobridge Tweak mode? - new!
Now 4 different Kobridge Tweak modes are available at post #3 below. Do not use this tweak other than Jelly Bean and stock rom.
If you are using the tweak included in the ROM, please redownload the tweak only and flash it. There were some changes made on it.
Issues on FL04 ROM - new!
Please report and check post #4 for up-to-dated information.
If your Sprint TV app does not work
Check here - http://forum.xda-developers.com/showthread.php?t=1565018
Google Play Store download error - 921
Check here
Out of space - not able to install the apps
Sometimes app couldn't be installed if there's a odex version app installed already. Try to remove it first and reinstall it.
Credits
Mattix724 for his deoxdexed ROM on FK23. On FL04, I totally changed logic from many areas.
SexTape for his leaked ROMs
agat63 for recovery kernel
tdunham, Shadow_God for being a great developer and friend
rwilco12 for his great rom/kernel/modem repository and his XDA dedication
Special Thanks to:
leaderbuilder

Kobridge's Stock Bloatware Remover for Jelly Bean
Some useful info on JB ROM:
Some widgets are not working on JB depending on the launcher.
Samsung Task manager is not showing from app list. To launcher the app, you can use the widget or long pressed 'home' button to run the Samsung task manager.
Old sqlite3 binary does not work on JB. I had to change the sqlite3 binary in this rom to make the wifi sleep timer working.
It appears that external_SD under /SDCARD is no longer pointing to external SD card. Now it's under /mnt/extSdCard, /storage/extSdCard - I need to look at some scripts running during the boot.
System partition is too small to hold all apps. It seems like that's the reason why Samsung added /preload partition and moved some of non-core apps there. I tried to keep all apps into /system partition and phone didn't boot.
snapshot key - vol down + power do not work any more. To get the snapshot, press the home key + power button together
New way to recover the phone using Nandroid & stock ROM:
Because Jelly Bean is using another partition which is not covered by our traditional CWM recovery. Whenever you restore your phone using nandroid backup oly, you may not get the full restore of your phone. It's because the /preload changes are not included. So, there is no way to backup this folder by cwm recovery.
So, what I'm suggesting method is
1. Be sure that you have a nandroid backup after JB rom flashed. Be sure that you have the flashable JB rom.
2. now to start the nandaroid recovery, reboot into cwm.
3. (full wipe data & cache) or do the factory reset
4. flash JB rom
5. (do not reboot after flashing the ROM) recover nandroid backup on the same recovery session
6. Flash Kobridge's Bloatware remover tool if you did that before
7. flash the JB kernel again (if your CWM kernel during nandroid backup was ICS or lower, then phone won't boot without this step)
8. reboot
Some other Kobridge's Tweaked ROM info:
When many apk files are updated or if you flashed new Kobridge's stock ROM, remove /data/local/zipalignedapk file and reboot. It will try to re-zipalign all apks from /preload /system/app /data/app.
Removed apks are placed in /storage/extSdCard/Removed_Apps/ (from system/app) and /storage/extSdCard/Removed_Apps/preload (from preload/symlink/system/app). /storage/extSdCard folder is a symbolic link of /mnt/extSdCard.
To move the removed apps back to original folder, you have to copy(move) the apk files from Removed_Apps folders to /system/app folder and change the permision to 644 and reboot. You cannot move the apk files back to /preload folder because the symbolic link is not there. To move it to preload folder, you have to manually create the symlink for the move files.
If you do not want to use Kobridge Tweak, remove the init.d folder and /system/bin/dvfs.sh file. For build.prop, copy it from original stock rom and place it to /system folder.
To check the tweak result, find /data/log/kobridge_tweakxx.log files (total 4 files created)
Again, I do not use 'data wipe'. From ICS to JB, everything moved ok and working fine for me.
On the same CWM recovery session, you can flash the ROM, Modem, and bloatware remover script also. But be sure that you need to wait enough time until system reboot and settle. After flashing the ROM, you may need to wait about upto 5 minutes. If you removed alignedapk file and doing the re-zipalign, then it would also take 3-5 minutes.
Kobridge's Stock Bloatware Remover for Jelly Bean (Samsung FK23 ROM)
How to flash - just like flashing the rom, flash zip file from CWM recovery.
You can flash this zip file just after flashing the rom or you can flash this zip file separately depending on your need. Be sure that after you flash this zip file, you may need to flash the original Kernel also at the same CWM session without rebooting your phone.
Where you can find the removed apps
You can find the removed apps from /mnt/extSdCard/Removed_Apps (system apps) and /mnt/extSdCard/Removed_Apps/preload (preload apps). To bring it back to your phone, move the apk files to /system/app or /preload/symlink/system/app folder and reboot.
Download Kobridge's Bloatware Apps Remover Tool vJB2.1
Download it from here - SprintZone added to existing app list vJB2.1
Code:
BadgeProvider.apk [odex]
BluetoothTest.apk
Books.apk
DrmProvider.apk
FactoryTest_U1_USA_SPR.apk
GoogleFeedback.apk
ID.apk
lcdtest_U1_USA_SPR.apk
Magazines.apk
MediaHub_SdgtlSpr.apk
MobilePrint.apk
MobiTV.apk
mSpotRadioSprint_VPL.apk
Music2.apk
nascar09_prod.apk
NOVA2HD.apk
PlusOne.apk
PolarisOffice4.apk
SelfTestMode_U1_EUR_OPEN.apk
SlateTest.apk
Sprint_Installer.apk
SprintMobileWallet.apk
SprintMusicPlus.apk
SprintZone_DSS.apk [v2.1]
Videos.apk
Videos.odex
WlanTest.apk
YahoonewsDaemon.apk
YahoonewsWidget.apk
YahoostockWidget.apk

Kobridge Tweak Pack FL04KOB_TWv4.1
I finally finished my homework...
*** If you are using the tweak included in the ROM, please redownload the tweak only and flash it. There were some changes made on it.***
Here is the links for 4 different modes of Kobridge Tweaks. If you are not familiar with Kobridge Tweak Pack or modes, you can check it out more information from here.
FL04KOB_TWv4.1SF(Super Fast - fastest - 1.2 GHz)
FL04KOB_TWv4.1F (Fast - 1.2 GHz)
FL04KOB_TWv4.1M (Moderate - 1.0 GHz)
FL04KOB_TWv4.1A (Aggressive - Best battery life - 1.0 GHz)
How to Flash:
1.Boot into CWM recovery.
2. Flash one of the Kobridge Tweak mode
3. Flash your original Kernel back
4. Reboot
5. Check Tweak log files - sometimes, CPU tweak does not reflected immediately after the boot. So, wait couple of minutes (maximum) and check it out.
Other Addons
tdunham's Jellybean FL04 Fancy Extended Toggles (deodexed rom only)
tdunham's FK23/FL04 Call Recorder Mod (deodexed rom only)
tdunham's FK23/FL04 Modded JB Camera (deodexed rom only)
tdunham's FK23/FL04 Call Recorder Mod Rev2 - included disabling the ascending ringtone(deodexed rom only)
More coming...

Known/Reported Issues on D710 FL04 ROM - Pure Stock
* Telenav does not work - app force closing
* The message popup from Sprint Zone is not removed and stick on top of other screens until option changed (screenshot attached)
* cpu1 value reset to cpu0 value about in every 5seconds
Reported Issues on Kobridge Tweaked ROM FL04.0 (not general rom issue)
* Please report
Kobridge Jelly Bean Stock ROM version history:
vFL04.0 Fixed some issues on FK23.0 configuration.
zipalign modified to fit on JB
build.prop modified
proload symlink configured correctly
fully deodexed for preload, system, framework apps
and more
vFK23.0 Initial release
Kobridge Bloatware Apps Remover version history:
2.1 Added Sprint Zone to Bloatware app list
2.0 Fixed some issue on previous script - download here
1.1 Fixed some issue that symlinks were not removed from /system/app folder
1.0 Initial release - http://d-h.st/8oF

I am sure I am first this time. Good to see you back here, kobridge!
Sent from my SPH-D710 using xda app-developers app

Very nice, like always......always love your tweaks
Sent from my SPH-D710 using Tapatalk 2

whooo.. can't wait to try this out with some "remove bloatware" addon!

I'm ready I'm ready n my spongebob voice.....
Sent from my SPH-D710 using xda app-developers app

Nice... this is probably coming out at a bad time though. It's looking like sextape is about to leak FL04.
Sent from my SPH-D710 using xda premium

Mattix724 said:
Nice... this is probably coming out at a bad time though. It's looking like sextape is about to leak FL04.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
You're right but no worries about that because FK23 gave me some experience about the JB ROM.:good:

Can't wait to try it out.
Sent from my SPH-D710 using Tapatalk 2

Uploading completed. It took several hours....
For now, to flash the modem or stock FK23 kernel, please use rwilco12's repository.
For the CWM, I used Agat's FF18 CWM kernel. Again, be sure that you have a nandroid backup available before flashing this rom.

kobridge said:
Uploading completed. It took several hours....
For now, to flash the modem or stock FK23 kernel, please use rwilco12's repository.
For the CWM, I used Agat's FF18 CWM kernel. Again, be sure that you have a nandroid backup available before flashing this rom.
Click to expand...
Click to collapse
Sweet stuff kobridge! I am Post #13...still feel lucky
Sent from my SPH-D710 using Tapatalk 2

Thus looks awesome. I'm kinda slow to the game.
Sent from my SPH-D710 using xda premium

Thanks Ko this is awesome!
Sent from my SPH-D710 using XDA Premium HD app

Flashed it last night and stayed up an hour just to play with things. Definitely a smooth ROM. I haven't come across many bugs or anything, will be keeping as my daily for now. Thanks Kobridge!

Thank for the work kobridge! Do you know if the stock hotspot is working in this one; it worked for me on the stock FK23 (I think Sprint let it slip out that way)? Eitherway I'll spin this when I get home.
As always I'm sure it's quick and smooth.
Thanks again.

leaderbuilder said:
Thank for the work kobridge! Do you know if the stock hotspot is working in this one; it worked for me on the stock FK23 (I think Sprint let it slip out that way)? Eitherway I'll spin this when I get home.
As always I'm sure it's quick and smooth.
Thanks again.
Click to expand...
Click to collapse
It works for me on FK23 without additional hotspot hack. For the last several releases, I did not applied the Sprint Hotspot on my rom but it's working fine for me if I do not wipe the data - This does not mean that you can get the hotspot without applying hotspot hack. By some reason, mine started working continuously since I applied hotspot hack from my several ROM versions before. After that, I never applied hotspot hack but it still works fine.
By the way, I'm uploading JB bloatware remover now. The link will show up shortly in my second post.

will you be adding multiwindow? pretty please!! kidding
but you know
what additions are you planning?
can I flash over my stock odexed rom (also fk23) or a full and utter complete wipe would be needed?

Tweaks?
To be honest I am not very familiar with your work But am in the process of downloading. I am curious as to what your tweaks are? I am for sure a noob by all means but understand the basics like flashing and mobile odin.... I have been one of the brilliant ones to hard brick my last E4GT and must say learned my lesson not to take short cuts. I am so grateful to you and all the other devs who have continued to provide us with these great roms and tweaks.:cyclops:
Also do you know if Tdunhams add-ons are working on this?

[ROM][GalaxyTab P1010][WIFI] JBROM FINAL V1.0 - New Notifications and more

The GT-P1010 it's a forgotten device by Samsung, knowing that it has the capabilities to run some of the most updated versions of android we are still waiting for advanced developers to port it, In the mean time I bring you today a themed ROM just to resemble the look of android Jelly Bean. It was a pleasure to develop for this device and you end users. In the future there will be more updates based on your feedback and if I still own the device. Now you can grab and go with your tab it has everything you need.
IMPORTANT: Advanced knowledge of what your doing it's required, I'm not responsible for the mismanagement of your device, soft-brick or hard-brick. Still, I'm here to help you with whatever you need.
WHAT'S NEW?
The Android system it's pretty much the same, the ROM is based on Android Gingerbread 2.3.6 KPO latest update for UK.
The status bar has been resized and extracted what was not needed, the toggles has been resized as well to gain more notification area on portrait and more importantly in landscape mode, added transparency too.
Theme for Settings and Main Menu is now black
Added new icons to resemble Jelly Bean.
New pop dialogs, menus, bars, buttons, radios, checks and more
Colors for the status bar clock and icons.
Added new JB keyboard
Replaced stock launcher with a modded version of Nemus Launcher, faster and very customizable.
Added new wallpapers to the gallery.
Rooted + busybox
Lockscreen animation and time position
Roboto font
New Sounds and ringtones
MXPlayer with codec
Dolphin + JetPack for full website browsing
[*]Complete animated UI
WHAT DO I NEED?
STOCK ROM GB 2.3.6 2012 July P1010XXKPO P1010XEUKPO
http://www.hotfile.com/dl/163467092/cef6ba6/P1010XXKPO_P1010XEUKPO_XEU.zip.html (mirror later)
CWM RECOVERY v5.0.2.7 + ROOT (thanks to MadTeam and Motafoca) ROM WORKS ONLY WITH THIS NO OTHER AND STOCK KERNEL [email protected]#1
http://sourceforge.net/projects/jbromgtp1010bk2/files/madteam-cwm-p1010-kpi.tar/download
ODIN v1.61
http://sourceforge.net/projects/jbromgtp1010bk2/files/ODINv1.61.zip/download
JBROM FINAL V1.0 BK201EKY
http://sourceforge.net/projects/jbromgtp1010bk2/files/NANDROID_JBROM_FINAL_V1.0_BK201EKY.rar/download
USB DRIVERS (if you need)
http://hotfile.com/dl/133929348/9107244/SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0.zip.html
PROCEDURE: For Windows only, Win7/8 x86/x64
1. MAKE A NANDROID BACKUP!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1059485
2. Charge your battery up to 40%
3. DOWNLOAD MODE: Turn off you tab, press and hold volume DOWN and POWER, A yellow triangle will appear with an android working in it, you are now in download mode.
4. ODIN: With your tab in download mode, open Odin3+v1.61.exe and plug it to the computer usb port, ID:COM text fiel most turn yellow, if not, you probably have to reinstall your USB Drivers, once that is yellow click on the PDA button and select the file: P1010KPO_P1010XEUKPO_HOME.tar.md5 and hit START in the Control Panel. After a few minutes your tab will boot in Stock KPO GB 2.3.6 android, turn off your tab again.
5. CWM Recovery + ROOT: Turn your tab into download mode once again and plug it, hit RESET in ODIN Control Panel, now click on PDA once more and select the file: madteam-cwm-p1010-kpi.tar hit START. Your tab will reboot and load android now with the Recovery Manager installed and it's now rooted (root the device may void your guaranty).
6. JBROM FINAL V1.0 BK201EKY: Transfer your downloaded file: "NANDROID_JBROM_FINAL_V1.0_BK201EKY.rar" to the following path:
"/sdcard:/clockworkmod/backup" (if doesn't exist create folders all lowercase) paste and extract here. From the app drawer selecet CMW Manager, grant superuser, select Recovery mode and Reboot, you are now in CWM Recovery. Navigate using your Vol +/- and Power as selector to: "backup and restore" then: "- restore" now: "- NANDROID_JBROM_FINAL_V1.0_BK201EKY" and finally: "Yes - Restore" once finish choose: "reboot system now" and wait ETA 5mins. Enjoy the ROM :fingers-crossed:
THANKS TO:
Wizard_Polska
bayustev
moxtrom
rfb813
Pranix
anyone else please let me know
PLEASE SUPPORT ME BY DONATING:
​
I've been BK201EKY from EL SALVADOR

I'll try this rom tonight...than i report back.(right now, my tab using kmicic)
Sent from my GT-S5300 using Tapatalk 2

well, i already try twice to flash.
1. try flash with madteam kpi from their site.(7,6mb). result : after flash jb rom is eternal bootloop.
2.i use madteam kpi from this site (3,9mb). result : stuck on odin half way when going to flash it.
any solution ? i'm back to stock first i think. and used nandroid backup to restore my previus rom.

bayustev said:
well, i already try twice to flash.
1. try flash with madteam kpi from their site.(7,6mb). result : after flash jb rom is eternal bootloop.
2.i use madteam kpi from this site (3,9mb). result : stuck on odin half way when going to flash it.
any solution ? i'm back to stock first i think. and used nandroid backup to restore my previus rom.
Click to expand...
Click to collapse
Did you follow the steps I replied on the General forum?
I would like to know if some else is having the same issue, anyway try this:
Go into Recovery mode, navigate to "mounts and storage" and format
/cache
/data
/system
/datadata
Now start the standard procedure again of installing STOCK KPO and after the ROM

I still stuck on samsung logo boot loop.
What i do is flash from begining (means froyo.had csc file ) than kpo firmware (only pda file)
After that i flash cf root.
In recovery mode i clean all. ( cache, dalvick, battery stat).
Then i flash jbrom rc1.2..wait until 4 mnts its start on samsung boot screen.... and stuck there in boot loop..
Maybe i should wait for other tester. And see the result.
send from p1010 kmicic rom tapatalk 2

bayustev said:
I still stuck on samsung logo boot loop.
What i do is flash from begining (means froyo.had csc file ) than kpo firmware (only pda file)
After that i flash cf root.
In recovery mode i clean all. ( cache, dalvick, battery stat).
Then i flash jbrom rc1.2..wait until 4 mnts its start on samsung boot screen.... and stuck there in boot loop..
Maybe i should wait for other tester. And see the result.
send from p1010 kmicic rom tapatalk 2
Click to expand...
Click to collapse
You tried to load it from FROYO? because rom is for gingerbread not froyo, I know Kmicic and David that's pretty much the best rom out there for p1010

BK201EKY said:
You tried to load it from FROYO? because rom is for gingerbread not froyo, I know Kmicic and David that's pretty much the best rom out there for p1010
Click to expand...
Click to collapse
no. of course not. it's just my procedure.flash from begining.
i flash your rom from fresh kpo..
and about kmicic.indeed a good rom..just one bug in kmicic rom. when usb debug is on, than connect to cable data to pc. always turn off again the usb conection. can't get connection to pc.
i think all rom are good because it's hard to make one.:good:
like your rom, i think is good one if i can get into.:fingers-crossed:
i just back to nandroid back up. that's all.
i wish there some dev can make cf-root from the last stock rom p1010 kpo.

bayustev said:
i wish there some dev can make cf-root from the last stock rom p1010 kpo.
Click to expand...
Click to collapse
New rom uploading, new framework and of course updater-script, I wish there were more testers like you, I thought there was a lot people wanting roms for this device, If there any ways you can spread the news, I won't get mad :good:

BK201EKY said:
New rom uploading, new framework and of course updater-script, I wish there were more testers like you, I thought there was a lot people wanting roms for this device, If there any ways you can spread the news, I won't get mad :good:
Click to expand...
Click to collapse
hey, copy my updater script from kmicic for P1010. I found errors and in my script are fixed

Well..mr wizard you help too? This is great..more hope for forgoten tabs then.love this
send from p1010 kmicic rom tapatalk 2

Wizard_Polska said:
hey, copy my updater script from kmicic for P1010. I found errors and in my script are fixed
Click to expand...
Click to collapse
Hey David how are ya? Thanks for coming by and give me some help and the chance to use your script, I'm doing some test over it right now and I can actually see a full script like CyanoMod, I wasn't really thinking on that yet considering that my script was basic for beta test and that it has always worker for me (only me I see :crying. Every advice you have for me will be very much welcome in this project knowing that your experience with this device is higher than mine. Thanks

BK201EKY said:
Hey David how are ya? Thanks for coming by and give me some help and the chance to use your script, I'm doing some test over it right now and I can actually see a full script like CyanoMod, I wasn't really thinking on that yet considering that my script was basic for beta test and that it has always worker for me (only me I see :crying. Every advice you have for me will be very much welcome in this project knowing that your experience with this device is higher than mine. Thanks
Click to expand...
Click to collapse
hey no problem, this isn't competition so you are free to copy. If you want you could copy files, edit etc.etc. from my rom.
if you want help write to me. I know how to change text under quick icons etc.

Any news mr ?
Sent from my GT-S5300 using Tapatalk 2

bayustev said:
Any news mr ?
Sent from my GT-S5300 using Tapatalk 2
Click to expand...
Click to collapse
I made some progress with new script, but colors on the screen are messed up and feels like theres is no HW acceleration, it's 2 am here gotta sleep now, hopefuly tomorrow I'll uploading, this project wont die, one way or another we'll make it work. nite

Good night sir. Nice dream.
Sent from my GT-S5300 using Tapatalk 2

I'm working right now on a way to install the rom as a nandroid backup (temporary)

Check new upload try to install please
Sent from my GT-P1010 using xda app-developers app

it works in my tablet, really nice JB look.
in a some apps (playstore for instance), a lot of fonts in black apear on black background and white in white background.
superuser doesn't work, it ask you for permission but it fails to give them (voltage control fails at boot, DPI cannot be changed, etc...), usb development didn't work either.

Great thanks for testing! You sure you installed CWM + root that I provided? Have you try updating SU from market. Titles in Playstore may appear white but they will get black when it propertly updates in a few minutes.
Sent from my GT-P1010 using xda app-developers app

i downloaded CWM from somewhere else, the file you uploaded in the first post is only 3.X MB, and cannot be flashed with odin.
I looked for the file somewhere else and the file size is about 7.4 MB.