Develop Bugs

Phone not recognized while in bootloader, works fine when booted into ICS.

Attempting to unlock the bootloader of my brand spankin new LTE G.Nexus. I installed the samsung USB drivers, am running Windows 7 64bit. Made sure USB Debugging was on. When running ICS issuing an 'adb devices' on my windows machine shows the device there, and I can remotely reboot it into the bootloader, however as soon as it goes into the bootloader (via manual reboot or remote) I loose USB connectivity, it shows up as an unknown device in my device mangler and ADB no longer see's it.
I've tried uninstalling/reinstalling the driver, reboots, etc. Can't figure it out. Anyone else having the same issue or have any ideas?
TIA!

picklz said:
Attempting to unlock the bootloader of my brand spankin new LTE G.Nexus. I installed the samsung USB drivers, am running Windows 7 64bit. Made sure USB Debugging was on. When running ICS issuing an 'adb devices' on my windows machine shows the device there, and I can remotely reboot it into the bootloader, however as soon as it goes into the bootloader (via manual reboot or remote) I loose USB connectivity, it shows up as an unknown device in my device mangler and ADB no longer see's it.
I've tried uninstalling/reinstalling the driver, reboots, etc. Can't figure it out. Anyone else having the same issue or have any ideas?
TIA!
Click to expand...
Click to collapse
im having similar issues...im stuck in "waiting for device" in the bootloader.

I'm having the same problem and nothing I've found helps. Since I really want to unlock the bootloader, and doing so wipes the device, I'm stuck not being able to do anything with the phone until I get this worked out

I had this problem when I was unlocking the bootloader. I kept playing around with it and reinstalled the drivers multiple time. I would uninstall the driver and install the driver when the phone was in bootloader mode (I believe).
Make sure the drivers you're setting it to are new.
http://dl.dropbox.com/u/4174784/usb_driver.zip were the drivers I used. These are for GSM model, not sure if they work for the CDMA/LTE version!
Alternatively, you can install PdaNet for drivers.

I finally got it to work. My problem was that I didn't have an updated driver for the device in bootloader mode. This is how I fixed it:
1. With your phone connected and in bootloader mode, go to your computers Device Manager (Control Panel -> Device Manager)
2. You should see an Android 1.0 device. Right click and choose Update Driver.
3. Choose Let Me Choose From This PC (or whatever it's called)
4. Click on Let Me Pick From List.
5. Choose Android Device
6. Choose Android Bootloader Interface
That's what worked for me.

Some people also had luck by installing the windows pdanet which installs drivers that should work too.

Oozer3993 said:
I finally got it to work. My problem was that I didn't have an updated driver for the device in bootloader mode. This is how I fixed it:
1. With your phone connected and in bootloader mode, go to your computers Device Manager (Control Panel -> Device Manager)
2. You should see an Android 1.0 device. Right click and choose Update Driver.
3. Choose Let Me Choose From This PC (or whatever it's called)
4. Click on Let Me Pick From List.
5. Choose Android Device
6. Choose Android Bootloader Interface
That's what worked for me.
Click to expand...
Click to collapse
Thanks buddy!
Worked for me, I thought it was due to my HTC/Motorola device drivers, so uninstalled all of those and re-installed the Samsung...but these steps worked. Thank you again (I did also hit the thanks button too FYI!)!

Oozer3993 said:
I finally got it to work. My problem was that I didn't have an updated driver for the device in bootloader mode. This is how I fixed it:
1. With your phone connected and in bootloader mode, go to your computers Device Manager (Control Panel -> Device Manager)
2. You should see an Android 1.0 device. Right click and choose Update Driver.
3. Choose Let Me Choose From This PC (or whatever it's called)
4. Click on Let Me Pick From List.
5. Choose Android Device
6. Choose Android Bootloader Interface
That's what worked for me.
Click to expand...
Click to collapse
It worked for me. Thanks!!

i have no idea why but it is just not working :/ in that last set of instuctions above...i dont even have android bootloader interface lol which is weird cause ADB is reading my phone just fine...but when in bootloader mode it just says waiting for device. Does anyone have the fastboot drivers?

Oozer3993 said:
I finally got it to work. My problem was that I didn't have an updated driver for the device in bootloader mode. This is how I fixed it:
1. With your phone connected and in bootloader mode, go to your computers Device Manager (Control Panel -> Device Manager)
2. You should see an Android 1.0 device. Right click and choose Update Driver.
3. Choose Let Me Choose From This PC (or whatever it's called)
4. Click on Let Me Pick From List.
5. Choose Android Device
6. Choose Android Bootloader Interface
That's what worked for me.
Click to expand...
Click to collapse
That method didn't work for me either. I'm running windows XP professional and do not see 'Android Device' in the list of devices... any other ideas anyone?

Did you download the Google USB drivers as part of the Android SDK? They're at the bottom of the list of things to download when you open SDK, that's what I did.

RMarkwald said:
Did you download the Google USB drivers as part of the Android SDK? They're at the bottom of the list of things to download when you open SDK, that's what I did.
Click to expand...
Click to collapse
I did,
Tried the PDAnet method as well. Adb works fine. Once I get into the boot loader the device isn't recognized. I get the Android 1.0 install prompt and cant install it.

Oozer3993 said:
I finally got it to work. My problem was that I didn't have an updated driver for the device in bootloader mode. This is how I fixed it:
1. With your phone connected and in bootloader mode, go to your computers Device Manager (Control Panel -> Device Manager)
2. You should see an Android 1.0 device. Right click and choose Update Driver.
3. Choose Let Me Choose From This PC (or whatever it's called)
4. Click on Let Me Pick From List.
5. Choose Android Device
6. Choose Android Bootloader Interface
That's what worked for me.
Click to expand...
Click to collapse
Thanks! FWIW, I had to uninstall the Samsung driver and use the Google USB driver to find the Android Bootloader Interface one... if others are having trouble, try that.

[Solution]Windows 8 - ADB/fastboot driver problem solved!!

Hello!!​
Well, hey guys. I thought I tell you the story, on why I posted this thread.
It started as I was installing Windows 8, on my laptop, and had the same problem, as some others. I just could not install the drivers, for my Droid, so I had a looksee and found that Windows 8 didn't yet have the capability, to download unsigned drivers, unlike Windows 7. So, I found a way of "tricking" Windows, into thinking, that these drivers are legit and it isn't forbidden to use, which is exactly what this tutorial tells Windows, in a way.
So, get going and use the full potential of your Android device!
Tutorial:​
I have found a solution, to the following problem;
After installing Windows 8, you cannot install fastboot drivers, but it recognizes the ADB drivers...
Solution:
Open the dev-manager, by typing following, in a command prompt window, or the run dialog. Whichever you prefer... : devmgmt.msc
Now, the dive manager, should pop up.
Install ADB drivers, (If you do not have them present, download them here/
To prevent confusion: When I say install, it can mean unpack, or instal... Quick tip: An installer does nothing, apart from unpacking files, to allocated space, on your computer
Download USB drivers, from here. (Link fixed)
Should you NOT have drivers installed:
Install the USB drivers, and download ADB/fastboot drivers.
Installation of ADB/fastboot drivers:
Open the device manager, and look for "Samsung Mobile Device", or "Unidentified Device". You can make your search easier, by unplugging the phone, whilst in device manager, then plug it back in, and see what's changed...
Once you have found your phone, Perform a right-click, on the device. Select : "Update device drivers", once the dialog has poped up, choose "Browse my computer" and goto your dsktop, where you have installed the files to.
Open just the "drivers" folder, nothing else...
Select OK, then wait for installation to finish.
Once that has been done, you need to reboot your device, into bootloader mode; do this by typing
Code:
path=%userprofile%\Desktop\ADB\adb reboot-bootloader
adb reboot-bootloader
into the command prompt (download & install this, if you want to do it the cmd-way...)
Or, turn off your phone, and reboot i it manually into bootloader-mode, by pressing
Code:
VOL UP +DWM & PWR
together, untill phone vibrates...
Once the phone is in bootloader, go back to the device manager, and look for a device named "android 1.0". Perform a right-click on this and select "Update device drivers". Again, selct "Browse my computer", but, instead of clicking on "Browse" and selecting the folder, again, select "Let me pick, from a list of drivers." Once the menu has popped up, select "Samsung Android ADB interface". Click OK, and wait for the drivers to install . Then, you're done. You have then successfully installed the ADB + fastboot drivers correctly, to test this, open a cmd window, and type following:
Code:
path=%userprofile%\Desktop\ADB\
fastboot devices.
If your device shows up, then you have done it!!
Now type:
Code:
fastboot reboot
adb wait-for-device
adb kill-server
Note: while the phone is booting (If you typed "adb wait-for-device") A cursor will blink, wait for that, to stop blinking, then type the next command
I hope you learned, from this tutorial!! Check my root helper out, if you have enough time
Should you have problems, in recovery, open your dev. manager, and look for following device:
Code:
Full
Select, right-click. Update driver (blah, blah, witter, droan)
Browse my computer -> Let me pick -> Samsung ADB -> Done. You have enabled the ADB drivers, on your SAMUNG GALAXY NEXUS!"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Addition: You can only reboot into bootloader, if you are using a motorola, Google or HTC branded Android device! This will NOT work with Samsung models (i.e. Galaxy S II/III) due to the fact, that they use Odin mode. Should the drivers need updating, for some devices, please let me know!

Motorola Razr
Hello, I was wondering if this would work for the Motorola drivers. I've been trying to install them so that I can fastboot my Razr, but it quits right after it recognizes that I'm on Windows 8.
I guess I might as well just try it in the meantime!
-Jake
Edit: In the ADB drivers link you posted, there's nothing to install. Just .sys files, .dlls, two .cat files, and some .infs. How exactly does one do anything with these files? Also, your second link for USB drivers was removed by mediafire.

thejakenixon said:
Hello, I was wondering if this would work for the Motorola drivers. I've been trying to install them so that I can fastboot my Razr, but it quits right after it recognizes that I'm on Windows 8.
I guess I might as well just try it in the meantime!
-Jake
Click to expand...
Click to collapse
Download MotoHelper. Right click the file and run in compatibility mode. It should install the drivers. I used this to run fastboot with my xoom.

It still hangs while running as admin under compatability mode for 7, I'll try as XP momentarily.
Edit: XP compatability didn't work either.

thejakenixon said:
It still hangs while running as admin under compatability mode for 7, I'll try as XP momentarily.
Edit: XP compatability didn't work either.
Click to expand...
Click to collapse
Bummer, I just remembered there was a setting to skip os version check in compatibility mode. Did you try that? If that won't work unfortunately I don't know what else to try. Sorry.
Sent from my Xoom using XDA Premium HD app

thejakenixon said:
Hello, I was wondering if this would work for the Motorola drivers. I've been trying to install them so that I can fastboot my Razr, but it quits right after it recognizes that I'm on Windows 8.
I guess I might as well just try it in the meantime!
-Jake
Edit: In the ADB drivers link you posted, there's nothing to install. Just .sys files, .dlls, two .cat files, and some .infs. How exactly does one do anything with these files? Also, your second link for USB drivers was removed by mediafire.
Click to expand...
Click to collapse
First of all, thanks, for letting me know about the link It's uploading again ^^
Yes, you can do the same for your Motorola. But only with the ADB drivers. Just do the same as with the Samsung. Select your device, form the devman. and right click. Update device drivers -> Browse -> Let me choose from a list... -> Samsnung ADB interface.
They are all provided by Google, inc. so, they are compatible, with every Android device. I've even used my Samsung ADB drivers, for a Sony Ericsson Xperia X8. So I can actually say, for myself, that they work. You then can work, using fastboot... ^^
Have fun fastbooting!
LG familyguy59/Beatsleigher

Well, I'm definitly glad, to see I'm actually helping some people, and they're appreciating it!!
I don't remember mentioning it, but if you Need help, PM me. I'll help you via Team Viewer ^^

will this work on Windows 8 Release Preview also ? are those compatible with x64 version of W8?

iconicpaul said:
will this work on Windows 8 Release Preview also ? are those compatible with x64 version of W8?
Click to expand...
Click to collapse
Yes, it works on both x86 and x64 bit architectures of Windows 8, works withRC and with pre-release...
Sent from my GT-I9300 using xda app-developers app

confirmed, it works, thank you...very fast and easy

thejakenixon said:
Hello, I was wondering if this would work for the Motorola drivers. I've been trying to install them so that I can fastboot my Razr, but it quits right after it recognizes that I'm on Windows 8.
I guess I might as well just try it in the meantime!
-Jake
Edit: In the ADB drivers link you posted, there's nothing to install. Just .sys files, .dlls, two .cat files, and some .infs. How exactly does one do anything with these files? Also, your second link for USB drivers was removed by mediafire.
Click to expand...
Click to collapse
To your edit. You have extracted the files. This is also called "installing" because you have extracted NEEDED files. Even when you extract a .zip/.rar/.tar/.tar.gz and so on, because you need files out of them, you are installing, but not to the system, but to yourself

Sorry for bringing up an old post, but this method is not working for me on Windows 8 Consumer Preview. When I'm trying to install the ADB drivers, it says the drivers cannot be installed because it's not digitally signed.
UPDATE: I got it to work by disabling the Digital Signature Enforcement on Windows 8. Steps: Restart Windows > Boot loader Menu > Other Options > Advance Options > *Computer Automatically Restarts* > Press F7 to Disable Digital Signature Enforcement

I cant get odin to work on win8 with my epic touch could this be my solution? Ive tried everything
Sent from my SPH-D710 using xda app-developers app

2phonejones said:
I cant get odin to work on win8 with my epic touch could this be my solution? Ive tried everything
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Yes, it should work with all Android-modification applications. I have never really had problems, with Odin, with any version of Windows, mainly because this is the first thing I do, on any of my Windows machines, but it is always worth a try Tell us, what you have found out!
If necessary, I'll try to find a solution myself
Sent from some GS III in some country, to a server somewhere in the US...

iconicpaul said:
confirmed, it works, thank you...very fast and easy
Click to expand...
Click to collapse
No worries, dude That's what I posted this thread for.

familyguy59 said:
Yes, it should work with all Android-modification applications. I have never really had problems, with Odin, with any version of Windows, mainly because this is the first thing I do, on any of my Windows machines, but it is always worth a try Tell us, what you have found out!
If necessary, I'll try to find a solution myself
Sent from some GS III in some country, to a server somewhere in the US...
Click to expand...
Click to collapse
thanks bro i didnt think anyone would repsond lol. Trying now, report back with results i want to flash so bad.:good:

Could someone pls. create a video tutorial, nad post this on Youtube, for me?
My laptop broke a couple of days ago, and my PC is only capable of running 98 - Vista, so, running on XP with 1GB of RAM.
I would appreciate this very much!
If you could do so and send me the link, via PM, I would be glad to pay 5€, via PayPal!

2phonejones said:
thanks bro i didnt think anyone would repsond lol. Trying now, report back with results i want to flash so bad.:good:
Click to expand...
Click to collapse
Ok, dude! Have fun!

Didn't work for me.

jorgefcbastos said:
Didn't work for me.
Click to expand...
Click to collapse
Did you follow the tutorial COMPLETELY, or did you leave stuff out? If you left something out, it's obviously not going to work
You may have to disable device driver signing, I've had quite a few people notify me about this.
But I'll sign the drivers, ASAP, so you won't have this problem
LG familyguy59/Beatsleigher
Edit: I forgot to mention, you need to tell me what exactly didn't work, otherwise I can't really help you

[Q] adb devices strange issue, not detecting

Solution:
If you were like me, you couldn't get ADB working no matter what you did with the drivers. As it turns out, I was plugging it into a USB 3 port on my motherboard. I have the USB 3 drivers installed, but there seems to be an adb issue with USB 3 ports. be warned, my issue is now fixed (I probably don't even need them bootleg drivers either). Thank You XDA.
Alright, so I just picked up a Galaxy Nexus (coming from Thunderbolt) today only to find out that my sdk will not detect my phone in adb devices. Now, I have the Thunderbolt and Eris working fine with it, but the NExus seems a little stubborn. Here are the steps I have taken:
1. Plug in phone, wait for win7 (x64) to install all the drivers... Success
1a. MTP and PTP both installed, using MTP for the rest.
2. Turn on debugging on my phone one more driver... Success
3. Went to the GNex Samsung support page to download and install that driver... Success
4. Go into Device Manager, everything is A-OK, drivers all happy
5. Open up my sdk prompt and type adb devices and 1 device is found, offline
6. Type it in again, nothing, maybe a glitch?
So there is nothing wrong in Device Manager, no Windows Updates, SDK works fine, but no device under adb devices. This is honestly the strangest thing ever.
If you have any special instructions regarding drivers, please be specific, stating "update your driver" doesn't really help.
Oh, and this is my first post I believe.

Update your drivers :laugh:
Right Click the "Android" option and select Update Driver. Choose to "Browse My Computer" and "Let Me Pick From A List." Pick the Samsung driver with the newest date and install it.
Srsly though...
If that doesn't work...try the PDAnet option.
My sig has a link.
Install PADnet and plug your phone in.
Then check that the new driver is the one in use.

@ OP, did you restart your PC after installing the drivers? If not, that may cause an issue. As well, you could always restart the ADB daemon. Type:
adb kill-server
adb start-server
As for drivers, I personally would not recommend using any package that installs crapware other software along with the driver (such as the PDA drivers). Chance are if the package comes with an .exe extension, it contains other software. 1wayjonny has packaged the driver by itself here. Those are clean drivers with nothing extra to cause any issues. I recommend those, but (as with anything that works well) you need to manually install it, i.e., right-click on the device listed in Device Manager and select update, and browse to the location where you unzipped the driver. This needs to be done TWICE: once when your device is booted in fastboot mode, and once when booted normally.

efrant said:
@ OP, did you restart your PC after installing the drivers? If not, that may cause an issue. As well, you could always restart the ADB daemon. Type:
adb kill-server
adb start-server
As for drivers, I personally would not recommend using any package that installs crapware other software along with the driver (such as the PDA drivers). Chance are if the package comes with an .exe extension, it contains other software. 1wayjonny has packaged the driver by itself here. Those are clean drivers with nothing extra to cause any issues. I recommend those, but (as with anything that works well) you need to manually install it, i.e., right-click on the device listed in Device Manager and select update, and browse to the location where you unzipped the driver. This needs to be done TWICE: once when your device is booted in fastboot mode, and once when booted normally.
Click to expand...
Click to collapse
Noob question, but how do I install those drivers?

epicrevolt said:
Noob question, but how do I install those drivers?
Click to expand...
Click to collapse
Is that a joke?
efrant said:
[snip]
As for drivers, I personally would not recommend using any package that installs crapware other software along with the driver (such as the PDA drivers). Chance are if the package comes with an .exe extension, it contains other software. 1wayjonny has packaged the driver by itself here. Those are clean drivers with nothing extra to cause any issues. I recommend those, but (as with anything that works well) you need to manually install it, i.e., right-click on the device listed in Device Manager and select update, and browse to the location where you unzipped the driver. This needs to be done TWICE: once when your device is booted in fastboot mode, and once when booted normally.
Click to expand...
Click to collapse

Alright, so I have done the following:
Uninstalled all Samsung Drivers through Device Manager
Unplugged phone
uninstalled those official Samsung drivers for the GNex (available for download on their site)
Plug phone back in, both MTP and Nexus unknown
install the 1wayjonny driver... Success (It's now under Android Device in Device Manager)
adb still doesn't work... f*ck
reboot phone into fastboot (vol +/- & power)
install 1wayjonny driver... success
fastboot device recognized by 'fastboot devices' and commads work.
I believe the issue is with the MTP device as it is not recognized so therefore I can't access the phone storage. So far the only way I can get MTP working is by using the official Samsung driver, but that overrides the ADB driver by 1wayjonny (no way around it, even through uninstallation and choosing the 1wayjonny driver, Samsung one is more 'recent').
In the attachment you can see that the MTP device has no driver and therefore is unavailable.
Thank you so much for the help so far.
UPDATE: MTP Driver downloaded through Windows Update, divice still not showing up in adb. Actually when I first run adb devices after kill-server it finds the device as offline, but as soon as I type 'adb devices' again, it's gone. poof.

Cannot stop USB drivers from auto-installing

Hello,
I have searched the forums and Google, and was not able to find anyone else with this issue, so here I am.
I'm on Windows 7 x64 with a stock Canadian Galaxy Nexus 4.0.1 (yakjuux.)
I am trying to install GNex Toolkit and am unable to get past the first step. No matter what I try to do, any time I plug in the phone, it installs the default drivers.
Device installation settings are set to "never install drivers from Win Update." Phone is in development mode, I have removed Google Nexus from my devices (and checked the "delete drivers" box, though it doesn't even appear anymore), there is nothing for Samsung in Programs and Features, I have used USBDeview and there is nothing for Samsung/Nexus. I've tried using PDANet to no avail (I get error 103). I tried using "uninstall drivers" with GNTK, no dice (it seems to just remove a registry entry).
Any other ideas on how to make my PC install the drivers I want and not the default ones?
Thanks.

Read part A of this post.

efrant said:
Read part A of this post.
Click to expand...
Click to collapse
I have read that entire post and Bourne-nolonger's guide. Instead of showing up as "Android 1.0" device in Device Manager, my phone always shows up as Galaxy Nexus, with no yellow triangles or any other issues. (Yes, developer mode is enabled, and it seems to make no difference to how my computer responds.)
From Bourne-nolonger's guide:
"As soon as you enable this Windows will pick up a new device and it will attempt to install a driver - this will fail (or hopefully it will)." - mine never fails, it always installs drivers from somewhere. When I attempt to install new drivers to the Google Nexus device using UNK 0.7, Windows tells me that I already have the newest drivers.
Should I be restarting my PC after every install/uninstall of drivers? That's the only thing I can think of....

Scarf Face said:
[snip]
Should I be restarting my PC after every install/uninstall of drivers? That's the only thing I can think of....
Click to expand...
Click to collapse
Absolutely.

Here is the sequence I followed:
- phone plugged in
- USB debug mode on
- uninstall phone from Device Manager
- USB debug mode off
- uninstall phone from Device Manager
- reboot
- reconnect phone, it installs with no problems
- enable USB debug mode while plugged in
- phone installs again, exactly like the previous time, with Galaxy Nexus in Portable Devices
So it appears my computer doesn't care if it is in USB debug mode or not. It sees them as two separate devices/states of device, but installs the same drivers for both.
edit: tried doing the same in fastboot mode; the Device Manager recognized it as Fastboot mode, but did not let me install the proper drivers, saying that I already have the newest ones.

Scarf Face said:
Here is the sequence I followed:
- phone plugged in
- USB debug mode on
- uninstall phone from Device Manager
- USB debug mode off
- uninstall phone from Device Manager
- reboot
- reconnect phone, it installs with no problems
- enable USB debug mode while plugged in
- phone installs again, exactly like the previous time, with Galaxy Nexus in Portable Devices
So it appears my computer doesn't care if it is in USB debug mode or not. It sees them as two separate devices/states of device, but installs the same drivers for both.
Click to expand...
Click to collapse
This is what I would do:
1) Unplug your device from your PC.
2) Go into Device Manager and in the View menu at the top, select show hidden devices.
3) Uninstall every driver related to the GNex/Samsung/Android/etc.
4) Reboot your PC.
5) Make sure your Device Installation settings are set to never download drivers from Windows Update (as per bourne-nolonger's post).
6) Make sure USB Debugging is enabled in your GNex's settings.
7) Plug your GNex into your PC.
8) In device manager you should see Android 1.0 with a yellow "!". Right-click on that and update the driver from where you downloaded 1wayjonny's driver.
9) Reboot your device in fastboot mode.
10) In device manager you should see Android 1.0 with a yellow "!". Right-click on that and update the driver from where you downloaded 1wayjonny's driver.

efrant said:
This is what I would do:
1) Unplug your device from your PC.
2) Go into Device Manager and in the View menu at the top, select show hidden devices.
3) Uninstall every driver related to the GNex/Samsung/Android/etc.
4) Reboot your PC.
5) Make sure your Device Installation settings are set to never download drivers from Windows Update (as per bourne-nolonger's post).
6) Make sure USB Debugging is enabled in your GNex's settings.
7) Plug your GNex into your PC.
8) In device manager you should see Android 1.0 with a yellow "!". Right-click on that and update the driver from where you downloaded 1wayjonny's driver.
9) Reboot your device in fastboot mode.
10) In device manager you should see Android 1.0 with a yellow "!". Right-click on that and update the driver from where you downloaded 1wayjonny's driver.
Click to expand...
Click to collapse
Done, with no luck: instead of Android 1.0, I get a normal GNex install; with fastboot I did get it to show Android 1.0, and installed Samsung Galaxy Nexus Fastboot Interface using the downloaded drivers.
When I am uninstalling GNex from Device Manager, it never asks me to delete the driver as well; it asked me once and I can't get it to do that again. With fastboot, it did ask me, and that seems to be the only difference in the process.

Scarf Face said:
Done, with no luck: instead of Android 1.0, I get a normal GNex install; with fastboot I did get it to show Android 1.0, and installed Samsung Galaxy Nexus Fastboot Interface using the downloaded drivers.
When I am uninstalling GNex from Device Manager, it never asks me to delete the driver as well; it asked me once and I can't get it to do that again. With fastboot, it did ask me, and that seems to be the only difference in the process.
Click to expand...
Click to collapse
At least you got the fastboot driver installed properly.
I'm out of ideas for the ADB driver though.
Sent from my Galaxy Nexus using Tapatalk 2

efrant said:
At least you got the fastboot driver installed properly.
I'm out of ideas for the ADB driver though.
Click to expand...
Click to collapse
Seems to be a problem with my PC, so I will try it with a different machine. Thanks for your help!

Ignore this. Wrong thread.

Can't get Fastboot to work

Ok. I can't get fastboot to work. WIndows 10 laptop. Disabled driver verification. ADB works fine and reboots into bootloader but once in bootloader no fastboot. I've got an "Unknown Device" in Other Devices in Device manager and I've tried to assign the google driver manually but it's not recognized as a driver for the device
I've removed and reinstalled drivers pre and post driver verification
I tried adding PIxel C lines to the driver INF file as instructed on stack overflow
I don't know what else to try. And i've tried on two different computers???
Help please.. thanks

I fought with this for ages today. To start with, I have the Wugfresh Nexus Root Toolkit installed. Now, when in bootloader, go to the device manager on your computer. Find the Pixel ("Unknown Device") and right click > Properties > Driver tab > Update Drivers > Browse Computer > Choose From List > WugFresh Development\Nexus Root Toolkit\data\Drivers > and pick the one that says something about the bootloader. Sorry, going off memory here. Now you should be able to get that one installed, and Fastboot will start showing up when in the bootloader.

Hakizi said:
I fought with this for ages today. To start with, I have the Wugfresh Nexus Root Toolkit installed. Now, when in bootloader, go to the device manager on your computer. Find the Pixel ("Unknown Device") and right click > Properties > Driver tab > Update Drivers > Browse Computer > Choose From List > WugFresh Development\Nexus Root Toolkit\data\Drivers > and pick the one that says something about the bootloader. Sorry, going off memory here. Now you should be able to get that one installed, and Fastboot will start showing up when in the bootloader.
Click to expand...
Click to collapse
I did the same : Choose from List >fastboot (I didn't install Wug)

jamgam said:
Ok. I can't get fastboot to work. WIndows 10 laptop. Disabled driver verification. ADB works fine and reboots into bootloader but once in bootloader no fastboot. I've got an "Unknown Device" in Other Devices in Device manager and I've tried to assign the google driver manually but it's not recognized as a driver for the device
I've removed and reinstalled drivers pre and post driver verification
I tried adding PIxel C lines to the driver INF file as instructed on stack overflow
I don't know what else to try. And i've tried on two different computers???
Help please.. thanks
Click to expand...
Click to collapse
This is what worked for me....
http://forum.xda-developers.com/showpost.php?p=64777133&postcount=96

jamgam said:
Ok. I can't get fastboot to work. WIndows 10 laptop. Disabled driver verification. ADB works fine and reboots into bootloader but once in bootloader no fastboot. I've got an "Unknown Device" in Other Devices in Device manager and I've tried to assign the google driver manually but it's not recognized as a driver for the device
I've removed and reinstalled drivers pre and post driver verification
I tried adding PIxel C lines to the driver INF file as instructed on stack overflow
I don't know what else to try. And i've tried on two different computers???
Help please.. thanks
Click to expand...
Click to collapse
I had the same problem man. This will fix it.
1. Open Device Manager and Select the Unknown Device
2. Select Update Driver
3. Select Browse My Computer
4. Select Let Me Pick From a List of Device Drivers On My Computer
5. Select Android
6. Select Android Bootloader
Done.

@Istvan_86,
We should move the discussion for your problem here.

cam30era said:
@Istvan_86,
We should move the discussion for your problem here.
Click to expand...
Click to collapse
Hello,
I don't see any link and sorry if I made too many posts.

Istvan_86 said:
Hello,
I don't see any link and sorry if I made too many posts.
Click to expand...
Click to collapse
That's OK. No problem. Did you try the steps in post #5 above?

Which operating system are you on? What worked for me on Windows 10 was to give up after several days and use a Windows 7 computer. I read everything and tried everything and I could not get Fastboot working on this device with Windows 10. I used every toolkit, every driver version, toolkits that install multiple driver versions, Minimal ADB + Fastboot, and who knows what else. If a well-documented end-to-end solution to this ever appears I'll be really grateful.

FWIW, it was my frustrations with this Windows driver nonsense, that eventually drove me to abandon Windows entirely. Been on Ubuntu for several years. No regrets.

cam30era said:
That's OK. No problem. Did you try the steps in post #5 above?
Click to expand...
Click to collapse
Thanks for point me here, yo offer me too much help.
Now I´m on Nougat working flawlessly.
CISGS said:
I had the same problem man. This will fix it.
1. Open Device Manager and Select the Unknown Device
2. Select Update Driver
3. Select Browse My Computer
4. Select Let Me Pick From a List of Device Drivers On My Computer
5. Select Android
6. Select Android Bootloader
Done.
Click to expand...
Click to collapse
Really, really, really thanks. I have the exact same issue and this solved it for me also.
Cheers!

Istvan_86 said:
Thanks for point me here, yo offer me too much help.
Now I´m on Nougat working flawlessly.
Really, really, really thanks. I have the exact same issue and this solved it for me also.
Cheers!
Click to expand...
Click to collapse
Welcome.

cam30era said:
FWIW, it was my frustrations with this Windows driver nonsense, that eventually drove me to abandon Windows entirely. Been on Ubuntu for several years. No regrets.
Click to expand...
Click to collapse
It's very annoying, there seems to be a few reasons it fails. Cable, 3.0 usb ports, windows 10 drivers. I get different results with different cables in different types of usb ports. Also switching to PTP seems to work using a usb 2.0 port with a standard usb 2.0 A to micro with a micro to c adapter. Charging and MTP fail, but at least ADB and Fastboot respond.
I am going to try to edit the win10 driver using this post as reference.
http://stackoverflow.com/questions/34775508/where-is-the-windows-adb-driver-for-the-pixel-c
---------- Post added at 11:05 PM ---------- Previous post was at 11:04 PM ----------
CISGS said:
I had the same problem man. This will fix it.
1. Open Device Manager and Select the Unknown Device
2. Select Update Driver
3. Select Browse My Computer
4. Select Let Me Pick From a List of Device Drivers On My Computer
5. Select Android
6. Select Android Bootloader
Done.
Click to expand...
Click to collapse
I came to the same conclusion, but after a reboot it was unrecognized again.

Only way I can it to stick is installing the 2nd option drivers via skipsoft toolkit. Connect pixel c via 2.0 port and cable to PC. Switch to ptp. Then manually force install driver choosing have disk using bootloader option. From then on it works using ptp.

What I am able to see using USB Device Tree Viewer, is that when I plug in my Pixel C to my ASUS Z97-A blue usb ports with USB debugging enabled, it can not identify it. Those ports use Microsoft Windows 10 drivers for the Intel USB 3.0 eXensible Host Controller - 1.0. Which is what is causing the failure, not the Pixel C drivers. When I updated my other green USB ports driver, windows used the same ones on my ASMedia USB 3.1 eXtensible Host Controller and also couldn't recognize the Pixel C any longer. I rolled back to ASMedia drivers, it worked fine. Updated using newer ASMedia drivers 4/11/2016 ver 1.16.35.1 and those work fine. Now to find working drivers for the Inter Host. Win7 drivers refuse to load.
UPDATE: If your bios allows, disable xHCI. Your USB ports will work as USB 2.0 but will detect your PIXEL C without issues.

Solution works 100%
If you've installed the SDK drivers and win10 can detect your Pixel C in every mode with usb debugging off. Use these win10 USB xHCi drivers,
http://www.win-raid.com/t834f25-USB-Drivers-original-and-modded.html

@clockcycle,
This solution works 100% too. https://www.ubuntu.com/

CISGS said:
I had the same problem man. This will fix it.
1. Open Device Manager and Select the Unknown Device
2. Select Update Driver
3. Select Browse My Computer
4. Select Let Me Pick From a List of Device Drivers On My Computer
5. Select Android
6. Select Android Bootloader
Done.
Click to expand...
Click to collapse
Been smashing my face off the wall since LAST NIGHT trying to figure this out. windows 7 machine/ windows 8/ ubuntu ! trying 100 different methods and this one FINALLY SOLVED THE ISSUE. gawd dayum thank you so much from the future !!!