Related
Ok so I am trying to plug my phone into pc using usb cable so i can use odin. But my computer doesn't recognize my device. I've tried everything from uninstalling the drivers and reinstalling them restarted pc and phone. nothing works i did get it to read one time and was able to access my sd storage and then i tried to go into download mode and i plugged in usb cable and it didn't recognize so i got out of download mode and it didn't recognize the phone again. Then i plugged in my girls evo and it reads the phone all the time. Is there something wrong with my epic then? how can i fix that problem. seriously getting frustrated!!
Try not to double post. We will get to your issue eventually. Refer to the other case, as it has potential solutions available for your issue.
(I've dealt with this as well.)
I'm running cyanogenmod 7 on my evo 4g and when I plug it into a computer it only charges and never prompts me if I want to connect as a disk drive. It used to but now it just stopped. I had a backup of my rom so I put it on my girlfriends evo and hers still connected to the pc like normal but mine will not give me the option to hook up through USB. My computer says unknown device. Any help would be great. I can provide more info if you need.
More info. It gives me code 43 in windows 7. I was able to hook it up in xp but when I tried doing anything it no longer was able to detect the phone. I did a factory reset and it still doesn't work. I'm at a complete loss. I feel the only thing left to do is revert completely back to stock losing root and starting from scratch.
perhaps try completely uninstalling the device from windows in Device Manager. Then plug it in again and let it re-install the drivers
sitlet said:
perhaps try completely uninstalling the device from windows in Device Manager. Then plug it in again and let it re-install the drivers
Click to expand...
Click to collapse
I've tried that on two different computers with windows 7. My gfs fone reads fine with the exact same rom but mine wont.
It seems like the drivers on the phone are corrupted or something. At one point I found a forum that suggested to turn off bluetooth and a few other things. I decided to see if turning off my wifi would do anything and finally my phone showed the usb debugging notification and the mount as usb notification but it wouldn't mount so I restarted my phone and now it's back to doing nothing but charge the phone.
The only difference between the two phones is the rom then? Perhaps make a backup and flash a different rom or re-flash your current rom to see if that helps
sitlet said:
The only difference between the two phones is the rom then? Perhaps make a backup and flash a different rom or re-flash your current rom to see if that helps
Click to expand...
Click to collapse
I actually took a backup of my rom and put it on my gfs phone and hers worked. we had the exact same rom. I will try installing a different rom however and i'll let you know what happens.
Okay so I had a back up of sinister rom so I restored it and now it asks me if I want to connect as a usb device and so I do and my computer still says usb device not recognized or whatever.
Wow so I tried a backup of sinister rom that I had and suddenly it asked if i wanted to connect as a disk drive but windows was still saying usb device not recognized. I reverted all the way back to stock losing root privileges and it still doesn't work. It appears to me that it is a hardware problem. I don't know what else to do.
ok, so I hooked my phone up to a computer with ubuntu on it and my phone showed up but then when I went to explore the sd card it said permission denied. Then I hooked it up in windows 7 and it showed unknown device under universal serial bus controllers(as usual) but it also had it under modem, which is what I want.
Okay, got it working on this computer. After plugging the phone in several times it still said device not recognized. I have also been pushing ##data# and it was saying the same thing. I decided to shut my phone off one last time and when I hooked it up i pushed ##diag# and now it works. ****ing stupid. Glad it's working now.
UPDATE: Now all of the drivers install when I plug the phone in except the HTC DIAG doesn't appear even when i enter diag mode on the phone. this is the only driver i need installed but i can't install it because the computer isn't picking up that part of the device....This is getting irritating.
Turns out my port is ****ed up. I'm gonna have to order a new one and replace it.
Let me start by saying I have read dozens of threads on connection issues from the original galaxy to the s2 and none of them have worked. Here is my problem. When I plug in my phone I get a MTP connected dialogue box but kies will not recognize my phone and odin won't recognize my phone in download mode. My computer's device manager doesn't even show drivers installed or any yellow triangles at all. As a matter of a fact, my computer does NOTHING when I plug in my phone. No installing drivers dialogue box or anything. I have tried manually mounting usb storage mode to no avail. I can not transfer files, root my phone or do anything. I'm running stock EK02. Also, with usb debugging box checked my phone just charges with no pc connection at all. with usb debugging unchecked it will show the mtp connected but my computer doesn't show anything
Here is what I've tried:
Installing and reinstalling kies about a dozen times.
uninstalling and reinstalling samsund drivers
rebooting my phone
tried different computers
I EVEN BOUGHT A NEW COMPUTER (brand new nothing installed)
Then I bought a new usb cord
restarted my computer several times
checked then unchecked usb debugging just in case
Please Help, I'm completely stumped......
I can get on multiple chats for anyone interested (gtalk, facebook, irc, whatever) or take responses here. thank you in advance.
--------------------------
UPDATE: so it was the USB cord the while time. Apparently you should really only use the USB cord that came with the phone, which I lost and had to borrow from someone else.
I connected my SG2 via USB cable to my PC and started seeing this error
"One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message."
I have tried everything from changing cables/PCs/enabling/disabling USB debugging to *#7284#, and none of them work ...
Is the device bricked, is there any hope of revival..please help i got this phone myself paying $400
Does your phone turn on and work and a connection to PC the only problem? If so your not bricked...you prolly need to install the drivers in order for your PC to recognize it so install kies on your PC
Sent from my SGH-T989 using XDA App
Yes phone turns on, charges through the port...just that it is not recognized by the PC....what could be wrong?
As I said previously you probably need to add the drivers on your PC install kies on your PC
Sent from my SGH-T989 using XDA App
Make sure you use one of your rear usb ports also. I had an issue with drivers installing in a front usb port.
Phew it turns out to be the samsung driver..I believe kies update must have corrupted and stopped the pc from recognizing the phone....
seshsud said:
I connected my SG2 via USB cable to my PC and started seeing this error
"One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message."
I have tried everything from changing cables/PCs/enabling/disabling USB debugging to *#7284#, and none of them work ...
Is the device bricked, is there any hope of revival..please help i got this phone myself paying $400
Click to expand...
Click to collapse
The definition of "bricked" is having a really expensive
... brick. It means your phone doesn't turn on no matter what you do to it (short of a JIG and that's not guaranteed) the "USB device not recognized thing" is a problem w many windows devices my vista computer does it all the time and I just switch ports.
Sent from my SGH-T989
I had this problem. tried everything and never got my phone to connect toy laptop. What did you do?
Sent from my SGH-T989 using Tapatalk
Having same/similar issue
Hey, was there every a solution found for this?
I'm having basically the same problem...using the cable that came with my phone, and have installed Kies (fresh). I have tried toggling multiple settings. I tried uninstalling kies and reinstalling. I tried using pdanet for the driver. I have tried a few different roms, as well: Darkside 2.4, 2.5.1, and gingersnap 1.21. All have had the same result.
When I plug the phone in, it beeps (charging) but no notification for usb settings (disk drive, sync, etc). On my computer, it pops up "USB Device Not Recognized" and says the device has malfunctioned, etc, same as OP.
In Device Manager, it shows under USB as "Unknown Device".
I have tried this with two Windows 7 laptops, and a Windows Server 2008 R2 desktop. Also tried with a different cable. This cable was able to transfer data from an external hard drive today, so I doubt anything is wrong with it.
Any help is greatly appreciated!
Chino9656 said:
Hey, was there every a solution found for this?
I'm having basically the same problem...using the cable that came with my phone, and have installed Kies (fresh). I have tried toggling multiple settings. I tried uninstalling kies and reinstalling. I tried using pdanet for the driver. I have tried a few different roms, as well: Darkside 2.4, 2.5.1, and gingersnap 1.21. All have had the same result.
When I plug the phone in, it beeps (charging) but no notification for usb settings (disk drive, sync, etc). On my computer, it pops up "USB Device Not Recognized" and says the device has malfunctioned, etc, same as OP.
In Device Manager, it shows under USB as "Unknown Device".
I have tried this with two Windows 7 laptops, and a Windows Server 2008 R2 desktop. Also tried with a different cable. This cable was able to transfer data from an external hard drive today, so I doubt anything is wrong with it.
Any help is greatly appreciated!
Click to expand...
Click to collapse
Well I had the same problem with a new sgs2 i got witb the warranty. I even made a post about it. Tried everything and nothing fixed it. Had to do another warranty exchange
Sent from Flip's SGS2
Did you try the drivers separate first or Mtp mode
Sent from my revolutionized Samsung infuse
I tried without the drivers, and went to wireless and network > USB utilities. The only option in there, however, is "Connect storage to PC". If I try that, then plug it in, the phone acts like I hit the back/undo button. It doesn't show that anything is connected, nor does it give any other options. At this point on the computer, I get the "USB device not recognized" error.
This happened before installing Kies/Drivers, and still happens after installing drivers and kies.
try another usb cable
i had the exact same error, and it ended up being a good USB cable that went south
I will try a different cable when I get home - Have a month old cable for a mytouch 4g that I know works.
Okay, I tried it with the other cable, on a desktop in the rear port. same thing...Phone start to charge, and I get the error that the device malfunctioned, yada yada.
Any other ideas? Should I try to connect in Download mode?
Alrighty, so in the end, I ended up completely unroting, using terminal emulator to remove superuser.apk, busybox, and su and putting right back to read only. Then in CWM, flashed a stock 2.3.5 ROM (Zedomax). However, I now have the 2.3.5 ROM and the 2.3.6 KL1 Kernel...
I'm planning to return to Tmobile/Samsung - will the kernel and rom versions not matching be a huge red flag??
Any help is appreciated. I have tried to flash the 2.3.5 kernel, but I always get an error that it's not signed/verified.
Ideas?
I was hoping to grab the 2.3.6 OTA update, but it says there is no firmware update. Is there an update file I can put on the SD card and update using the stock recovery?
UPDATE:
I called T-Mobile Customer Service today, and went through the "troubleshooting" with them again. They ended up sending me a new one, overnight. They didn't ask anything about doing anything custom with it like rooting or other modifications.
I'm not sure if it made a difference, but I'm within 90 days, and also have the "best" insurance/warranty coverage through T-Mobile, and whoever their insurance provider is that I signed up for when I bought the phone.
Final charge is for $5, which I was told is some kind of fee from Samsung, but will appear on my bill.
Anyway, not too bad. Can't wait to get rid of touchwiz again when I get the new phone!
Chino9656 said:
Alrighty, so in the end, I ended up completely unroting, using terminal emulator to remove superuser.apk, busybox, and su and putting right back to read only. Then in CWM, flashed a stock 2.3.5 ROM (Zedomax). However, I now have the 2.3.5 ROM and the 2.3.6 KL1 Kernel...
I'm planning to return to Tmobile/Samsung - will the kernel and rom versions not matching be a huge red flag??
Any help is appreciated. I have tried to flash the 2.3.5 kernel, but I always get an error that it's not signed/verified.
Ideas?
I was hoping to grab the 2.3.6 OTA update, but it says there is no firmware update. Is there an update file I can put on the SD card and update using the stock recovery?
UPDATE:
I called T-Mobile Customer Service today, and went through the "troubleshooting" with them again. They ended up sending me a new one, overnight. They didn't ask anything about doing anything custom with it like rooting or other modifications.
I'm not sure if it made a difference, but I'm within 90 days, and also have the "best" insurance/warranty coverage through T-Mobile, and whoever their insurance provider is that I signed up for when I bought the phone.
Final charge is for $5, which I was told is some kind of fee from Samsung, but will appear on my bill.
Anyway, not too bad. Can't wait to get rid of touchwiz again when I get the new phone!
Click to expand...
Click to collapse
FYI, I just went through the same thing. Decided to finally root my phone after owning it for 2 weeks.
Phone nor the phone would recognize USB data, but would charge. Tried another cable and no luck.
Rebooted the phone. Works like a charm now.
Hello,
All of a sudden my LG G4, Model 815 can't be recognised by computers anymore. Tried different PC's, with different OS, also have tried different cables. I have been using official cable that I found in original package and everything was working good, but now the phone only shows charging and PC's are showing popups that usb device is not recognised.
I was doing a little reasearch and already tried some simpliest things - reinstalling drivers, tried different cables, different PC's. For example my cable works fine with HTC M9, but doesn't do the thing for me anymore. And vice versa HTC cable works for HTC and does not for my LG. Also I found that you must simply select "charging" in top of your left corner and just select MTP. The problems is, that is not shown in my phone anymore. I'm thinking of trying to do factory reset, but before that maybe some of you have some thoughts? Could it be my phone hardware problem? Before a couple of days ago when everyting was working fine, I did not do anyting unusual, also that phone was never rooted, so I can't believe that it is somehow broken. I have it for nearly three months I think.
And yes, I understand that I can simply transfer my files through, for example AirAndroid of similar apps, but I cannot stand that error sounds playing on my laptop when I connect my phone through the cable to charge it.
Now it is running Android OS 6.0 (marshmallow)
LG G4 MTP Transfer Broken
Hello XDA,
I am having the exact same issue. MTP worked fine and then one day stopped. I believe it happened when I tried to transfer photos from phone to computer via USB and File Explorer. The transfer started, then after about 3 images transferred I received an error, "file transfer the system cannot find the file specified", after that the USB logo disappears, it will disappear from Device Manager, it will not even charge via USB. A phone reboot will fix the USB charging, but the option to switch to MTP is gone. I can't which it in in Developer Options either.
I've also tried all the same things LocaSnai suggested. Such as, different cords (3 of them), windows drivers, LG Air Drive, LG PC Suite, and LG Mobile Support Tool, Verizon Wireless Software Upgrade Assistant, of which none will update or repair the phone. I've also restarted Media Storage service (force stop and reboot). My Nexus 7 tablet connects perfect every time using the same 3 cables. The wife's i phone 6 also connects without issue.
I have performed a factory reset and MTP worked UNTIL I restored the LG backup. Then it went back to the same issue. Factory reset was a LG Support idea. They said that if it happened after the factory reset and back up restore, it could be a virus or issue with an app. How would we go about detecting what is wrong?
While working on this message I tired a few new things. I am able to get MTP to show up (not work as it used to) by plugging the phone into power, and then unplugging and plugging into USB. Each time, MTP will recognize (I tried all the software above when MTP shows up, none recognize the phone.) If I unplug USB and plug back into USB, MTP will not show up, only charge will. Have to plug into power then back to USB (I am using two cables, one in the brick and one in USB. Nexus 7 will work as expected with the same two cables). Some times I see the Yellow Triangle over the LG UBS entry, but following this tutorial doesn't work: www.verizonwireless.com/support/knowledge-base-161810/ Uninstalling the driver and letting it reinstall.
My phone is as original as the day I bought it. ie not rooted or tampered with. Android is up-to-date.
Thank you in advance to the kind folks who offer assistance!
nickzee said:
Hello XDA,
I am having the exact same issue. MTP worked fine and then one day stopped. I believe it happened when I tried to transfer photos from phone to computer via USB and File Explorer. The transfer started, then after about 3 images transferred I received an error, "file transfer the system cannot find the file specified", after that the USB logo disappears, it will disappear from Device Manager, it will not even charge via USB. A phone reboot will fix the USB charging, but the option to switch to MTP is gone. I can't which it in in Developer Options either.
I've also tried all the same things LocaSnai suggested. Such as, different cords (3 of them), windows drivers, LG Air Drive, LG PC Suite, and LG Mobile Support Tool, Verizon Wireless Software Upgrade Assistant, of which none will update or repair the phone. I've also restarted Media Storage service (force stop and reboot). My Nexus 7 tablet connects perfect every time using the same 3 cables. The wife's i phone 6 also connects without issue.
I have performed a factory reset and MTP worked UNTIL I restored the LG backup. Then it went back to the same issue. Factory reset was a LG Support idea. They said that if it happened after the factory reset and back up restore, it could be a virus or issue with an app. How would we go about detecting what is wrong?
While working on this message I tired a few new things. I am able to get MTP to show up (not work as it used to) by plugging the phone into power, and then unplugging and plugging into USB. Each time, MTP will recognize (I tried all the software above when MTP shows up, none recognize the phone.) If I unplug USB and plug back into USB, MTP will not show up, only charge will. Have to plug into power then back to USB (I am using two cables, one in the brick and one in USB. Nexus 7 will work as expected with the same two cables). Some times I see the Yellow Triangle over the LG UBS entry, but following this tutorial doesn't work: www.verizonwireless.com/support/knowledge-base-161810/ Uninstalling the driver and letting it reinstall.
My phone is as original as the day I bought it. ie not rooted or tampered with. Android is up-to-date.
Thank you in advance to the kind folks who offer assistance!
Click to expand...
Click to collapse
I had the same problem (at the same time I had problems with my sim and my message light was showing a dim green..), tried everything, drivers, cables, at the end a different pc and then I rebooted my phone while It was connected to the 2nd pc, after this, every problem was gone and I good see my phone again in windows. Now after a few reboots with and without the connection to a pc, the phone seems to be working as usual again...
(and My phone is also as original as the day I bought it. ie not rooted or tampered with. Android is up-to-date.)
Doorwerth, thank you for the suggestion. Tried that a few minutes ago and still have an issue.
I'm considering this next: LG G4: How to Boot into Download Mode. I think it's a bit extreme.