Develop Bugs

[Q] Edited framework-res.apk

Can anyone edit a framework-res.apk with no mods other than adding the crt animation? I've found guides on how to edit the bools file in the res/values filder inside the apk, but I can't get it to recompile the apk correctly. Can someone tell me how or send me an edited apk or something?

If you want to post your framework file, I'll do it for you and send it back.

I just posted several of these for Caulkulin's 3.0 rom. What are you using now? His framework, but with a stock battery look.
Sent from my SPH-D710 using XDA

kyamora said:
Can anyone edit a framework-res.apk with no mods other than adding the crt animation? I've found guides on how to edit the bools file in the res/values filder inside the apk, but I can't get it to recompile the apk correctly. Can someone tell me how or send me an edited apk or something?
Click to expand...
Click to collapse
You need to check the error and see whats wrong with the framework file. Also you just want a stock framework file with crt on? Also what are you using to compile and decompile

playya said:
You need to check the error and see whats wrong with the framework file. Also you just want a stock framework file with crt on? Also what are you using to compile and decompile
Click to expand...
Click to collapse
I was using apk manager 4.9, and I have no idea how to read the log.
I attached my framework-res. It's stock from FD19, I probably should have specified.

If no one gets to it, I'll mod it when I get home.
Sent from my SPH-D710 using xda premium

All done. I tested on my phone. After I replaced the apk, I had to manually restart the phone for it to work. I placed your apk in a zip file before I uploaded, so make sure you unzip your apk before putting it back on your phone.

Thank you so much, it works very well.
Now I'd just like to know how you did it. Coming from a clean computer with nothing installed, what would I need to decompile an apk, edit it, and compile it again? I'm trying to get a handle on the whole thing to do some development myself.

Try and upgrade to Apk Manager 5.02 since I just de-compiled and then compiled your apk file without an issue. Also try and update everything associated with it like your java... But it seems quite fine to me
Edit: just tried yours again as well as removing animation I lowered autobrightness which is something I do on all my roms for better battery life.. Try that mod next

playya said:
Try and upgrade to Apk Manager 5.02 since I just de-compiled and then compiled your apk file without an issue. Also try and update everything associated with it like your java... But it seems quite fine to me
Edit: just tried yours again as well as removing animation I lowered autobrightness which is something I do on all my roms for better battery life.. Try that mod next
Click to expand...
Click to collapse
Do I have to do anything to set it up or is it good to go from install? Should I restart my computer?
Also where can I find 5.02? I had a lot of trouble finding 4.9 in the first place.

I've never used apk manager, so I'll check that out also. I used apktool to mod your framework along with all the java runtime files it needed to work.
Sent from my SPH-D710 using xda premium

&roid said:
I've never used apk manager, so I'll check that out also. I used apktool to mod your framework along with all the java runtime files it needed to work.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Apktool confused me so I used apk manager. I can't figure out how to get apktool to work. Do you have a link to a good guide or anything?

There are some good ones on xda. I'll link you one when I get home.
Sent from my SPH-D710 using xda premium

I was apparently using the gingerbread method for an ICS build. Would that have kept it from compiling correctly?

kyamora said:
I was apparently using the gingerbread method for an ICS build. Would that have kept it from compiling correctly?
Click to expand...
Click to collapse
YES

&roid said:
YES
Click to expand...
Click to collapse
Haha, at least I'm learning.

To be fair, no one specified. Thanks for all the help guys.

Hi. Any help me to on crt effect in this framework ? I try apk menager and apk edit, and always some problem when compile, program loop and only exit work
http://db.tt/W2DKqulN

[GUIDE][ONLY-P350]Porting Guide for LGE P350

PORTING GUIDE By kD​
Disclaimer : I'm not responsible for any damage caused to your phone due to this guide or me! if you will point over me. I will simply laugh at you!
This isn't gonna make fully functional rom port for you! it is just the start!
Prerequisites :
1.You need one ROM of LG P350 and Other ROM from the device you want to port it
2. ADB [ Please google for that! it is Universal android package ]
3. Little Mind
Now Let's start the Port
First of all
EXTRACT Both ROMS ZIP One should be P350 ROM and Other should be the ROM you want to port!
Name P350 ROM as BASE and Other Device ROM as PORT
CHANGE KERNEL:
1. Open both BASE and PORT Folders
2. Copy & Replace Boot.img file from BASE TO PORT
3. You're Done
Click to expand...
Click to collapse
NOTE NOW BELOW DONE ALL THE FOLDERS ARE LOCATED IN SYSTEM FOLDER
CHANGE BIN FILES
1. Open BASE AND PORT Bin Folders
2. Copy the below written bin files from BASE TO PORT
Code:
am
ami304d
bmgr
brcm_patchram_plus
hci_attach
fix_permissions
ime
input
monkey
pm
port-bridge
rild
servicemanager
vold
3. You're done
Click to expand...
Click to collapse
CHANGE ETC FILES:
1. Open ETC Folder in
2. Now Delete the Below written etc files from PORT
3. Now Get these etc files from BASE and Copy them to PORT
Code:
bluetooth
dhcpd
firmware
permissions
ppp
wifi
wl
apns-conf.xml
dbus.conf
gps.conf
hosts
media-profiles.xml
resolv.conf
vold.fstab
4. You're done
Click to expand...
Click to collapse
CHANGE LIBS:
1. Open lib folder in Both PORT and BASE
2. Delete the below written libs from PORT
3. Now Copy ALL the Folders and libs which are written below from BASE TO PORT
Code:
hw
egl
libauth.so
libcm.so
libbluedroid
libbluetooth
libbluetoothd
libcamera
libcameraservice
libdiag.so
libdbus.so
libdss.so
libdsm.so
libdll
libgsl.so
libgstk_exp.so
libmiscta.so
libmmgsdilib.so
libmmipl.so
libmmjpeg.so
liblog
libnv.so
libinput.so [ it is only needed for ics and above based roms ]
liboem_rapi.so
liboemcamera.so
libhardware_legacy
liboncrpc.so
libpbmlib.so
libqmi.so
libqueue.so
libril.so
libril-qc-1.so
libsensorservice
libwebcore
libwms.so
libwmsts.so
4. Yeah! You're done!
Click to expand...
Click to collapse
CHANGE USR Files
1. Open USR folder in both PORT and BASE
2. Now Change the below given folders from BASE to PORT
Code:
keylayout
keychars
3. You're done!
Click to expand...
Click to collapse
CHANGE XBIN FILES
1. Open xbin folder in both PORT AND BASE
2. Change below given xbin files from BASE TO PORT
Code:
HCIDUMP
HCITOOL
HCICONFIG
3. You're done
Click to expand...
Click to collapse
CHANGE BUILD.PROP File
1. Open both Build.prop file with Notepad of PORT AND BASE
2. Now change the below given lines from BASE TO PORT
Code:
ro.product.board=
ro.product.model=
ro.product.brand=
ro.product.name=
ro.product.device=
ro.product.manufacturer=
ro.build.product=
ro.sf.lcd_density=120
ro.sf.hw_lcd_density=120
3. You're done
Click to expand...
Click to collapse
Now Just make zip of PORT Folder contents! Now you need to sign it!
You can sign your rom with [TOOL] RegawMOD Zip Signer v1.0 | 9-28-2010 - xda-developers
If you don't sign your rom you can disable signature verification in recovery!
Now you've finished porting your first rom! I'm not 100 % that it will boot but most likely it should boot up! if it don't boots! Adb logcat is still there!
Hit thanks if you liked my work!

nc tutorials..
but i think you have to give links.
for the roms?
and put some pics and videos for complete tutorials.
bcoz for a newbies like me. its to complicated to understand.
but thanks anyway

Will do that soon thanks for recommdation :d

And yeah don't say thanks press thanks is sexy

rom2maru said:
And yeah don't say thanks press thanks is sexy
Click to expand...
Click to collapse
LOL. i already press it. sory for that .
Sent from my LG-P350 using xda premium

Anyway plz have a try porting with this menthdod :d

rom2maru said:
Anyway plz have a try porting with this menthdod :d
Click to expand...
Click to collapse
i will try it later. for now im too busy with my work.
Sent from my LG-P350 using xda premium

ohh ok no problem ;D

n1ck018 said:
nc tutorials..
but i think you have to give links.
for the roms?
and put some pics and videos for complete tutorials.
bcoz for a newbies like me. its to complicated to understand.
but thanks anyway
Click to expand...
Click to collapse
yes please, some pics and links
pd: may pass this rom to p350?: http://forum.xda-developers.com/show....php?t=1836116

rom2maru said:
THIS IS THE PORTING GUIDE FOR YOU ALL. SO GUYS YOU CAN ALSO BE ANDROID DEVELOPER.....
NOTE : THIS GUIDE IS FOR PORTING P500 ROMS TO P350 BUT ONLY OLD BASEBAND. YOU CAN TRY WITH VARIOUS DEVICES LIKE GT540 BUT P500 IS BEST FOR PORTING..
IMPORTANT : I'M NOT RESPONSIBLE FOR ANY HARM CAUSE TO YOUR PHONE. IT WILL NOT DO ANY HARM BUT THEN ALSO SAFETY IS NECCESSARY...
'''''''''''''''''''''''''''''''''''THIS WILL NOT MAKE A FULLY FUNCTIONAL ROM'''''''''''''''''''''''''''''''''''''
Code:
FIRST OF DOWNLOAD The Rom You Want to Port and One Rom For Base
NOW COPY BOTH THE ROMS SOMEWHERE
NOW EXTRACT BOTH THE ROMS
''''''''''''''''''''''''''''''''''''SO NOW THE PORTING STARTS'''''''''''''''''''''''''''''''''''''''''''' '''''''''''''''
Code:
OPEN BOTH THE FOLDERS
NOW RENAME BOTH THE FOLDER AS The rom you want port AS PORT
AND The ROM Which u take as base AS BASE
NOW OPEN BOTH PORT AND BASE FOLDER
SO GUYS NOW PORTING STARTS :
Code:
first copy this boot.img from base folder to port folder. boot.img is main
NOW OPEN THE SYSTEM > BIN FODLDER AND COPY THIS FILES FROM BASE TO PORT
Code:
am
ami304d
bmgr
brcm_patchram_plus
hci_attach
fix_permissions
ime
input
monkey
pm
port-bridge
rild
servicemanager
vold
NOW OPEN SYSTEM > ETC FOLDER AND COPY THE FOLLOWING FILES FROM BASE TO PORT BUT FIRST DELETE THIS FILES FROM PORT
Code:
bluetooth
dhcpd
firmware
permissions
ppp
wifi
wl
apns-conf.xml
dbus.conf
gps.conf
hosts
media-profiles.xml
resolv.conf
vold.fstab
THIS WERE THE ETC FOLDER FILES NOW GO TO SYSTEM > LIB FOLDER AND COPY THIS FILES FROM BASE TO PORT. BUT FIRST DELETE THAT FILES FROM PORT
Code:
modules
hw
egl
THIS THREE WERE FOLDER NOW THE LIBS. COPY IT FROM BASE TO PORT
Code:
libauth.so
libcm.so
libbluedroid
libbluetooth
libbluetoothd
libcamera
libcameraservice
libdiag.so
libdbus.so
libdss.so
libdsm.so
libdll
libgsl.so
libgstk_exp.so
libmiscta.so
libmmgsdilib.so
libmmipl.so
libmmjpeg.so
liblog
libnv.so
liboem_rapi.so
liboemcamera.so
libhardware_legacy
liboncrpc.so
libpbmlib.so
libqmi.so
libqueue.so
libril.so
libril-qc-1.so
libsensorservice
libwebcore
libwms.so
libwmsts.so
THIS WERE THE LIBS THAT WERE NEEDED FOR PORTING
NOW OPEN THE SYSTEM > USR FOLDER NOW COPY THE TWO FOLDERS FROM BASE TO PORT BUT FIRST DELETE THAT FOLD FROM PORT
Code:
keychars
keylayout
THIS WERE THE USR FILES NEEDED FOR PORT
NOW OPEN THE SYSTEM > XBIN FOLDER AND COPY THE THREE FILES FROM BASE TO PORT
Code:
HCIDUMP
HCITOOL
HCICONFIG
SO GUYS NOW THE LAST PART OF PORTING THAT IS BUILD.PROP. OPEN THE BUILD.PROP FROM SYSTEM > BUILD.PROP OPEN IT USING NOTEPAD. OPEN BOTH BASE ND PORT BOTH BUILD.PROP
NOW U NEED TO CHANGE THE FOLLOWING FROM BASE TO PORT
SO GUYS JUST CHANGE THIS FIELDS FROM BASE TO PORT AND ADD ONE LINE AT THE END
SO GUYS SAVE IT AND CLOSE BOTH THE FOLDERS. NOW YOU JUST NEED TO CREATE ZIP OF IT (DONT MAKE FOLDER ZIP MAKE CONTENTS ZIP)
AND GUYS FOR SIGNING DOWNLOAD ZIP SIGNER FROM HERE AND SIGN IT
[TOOL] RegawMOD Zip Signer v1.0 | 9-28-2010 - xda-developers
IF NOT SIGNED THEN AT THE TIME OF FLASHING TURN OFF ZIP VERIFICATION. SO GUYS YOU HAD GOT UR OWN ROM. NOW YOU ARE ANDROID DEVELOPER
Enjoy Porting !
Click to expand...
Click to collapse
your tutorials are always awesome :good:

i want to ask that can i port cm 10 of p500 to our device using cm 7 or cm 9 of our device????????????????????
if yes then.....
i tried with cm 9 but when flashing got error like getprop ro.product.name == p500 and unknown commands so what can be cause??????

pkprasanna said:
i want to ask that can i port cm 10 of p500 to our device using cm 7 or cm 9 of our device????????????????????
if yes then.....
i tried with cm 9 but when flashing got error like getprop ro.product.name == p500 and unknown commands so what can be cause??????
Click to expand...
Click to collapse
I had this error when porting a rom CM9 from p500 to p350, but I exclude this part of the update script, and the rom installed, however it is not on the screen starts Penguin.

Re: ICS
gabripop said:
I had this error when porting a rom CM9 from p500 to p350, but I exclude this part of the update script, and the rom installed, however it is not on the screen starts Penguin.
Click to expand...
Click to collapse
I have the same problem ...

prachetas13 said:
I have the same problem ...
Click to expand...
Click to collapse
I do not think there is a kernel that works legally in the CM9 p350 must be why the system does not start ...

Its a problem of updater-script.
There is a line starting with assert(getprop(.....
Delete this line...
If you find any other line starting with this then delete them also.
And you can only port roms only with same version . Like if the port rom is cm9 than base should also be cm9.

I will try this. I have bad exeperience whith another thread, only get kernel pannic and don't boot.
But your thread look s with more details.
Sent from my LG-P350 using xda app-developers app

Sir can i port
Sir Can i port CM9 From P500 or AOKP or Slim based I mean any ics based rom ? to p350 from gt540 or p500 ? If yes i would surely like to try ;D

Hi man, I use your guide and it works, only whith 2 of P500, but i have a trouble, I can't see the status bar and the screen on calls. any tip????
Thank's for all.

Porting Rom's whith you guide.
Your_girlfriend_cheats_us said:
Hi man, I use your guide and it works, only whith 2 of P500, but i have a trouble, I can't see the status bar and the screen on calls. any tip????
Thank's for all.
Click to expand...
Click to collapse
View attachment 1457794
View attachment 1457795
this are the logcat s of both Roms, I hope not being abussing you.
Thanks for all man, U R cool.
LuisAkira2301 told me that I must add libs:
libui
libsurfarcefinger
And it really works. So, It's fixed now, Thanks man, you too.

So Release it !!!!!!!!!! Man !! and Don't Forgot to Add Credits

[Q] How to change "Sprint" on pull down menu?

I think I saw this done on one of Phantom's ROMS. It said Galaxy SIII instead of Sprint. Is there an APK I can decompile and modify that?

skarloey28 said:
I think I saw this done on one of Phantom's ROMS. It said Galaxy SIII instead of Sprint. Is there an APK I can decompile and modify that?
Click to expand...
Click to collapse
Yes, there is.
I would PM EMSPilot..he knows that stuff

You can also put a modified eri.xml in /data
Sent from my Galaxy Nexus using Tapatalk 2

You have to decompile SystemUI.apk and perform some XML edits. Check out this thread, second post:
http://forum.xda-developers.com/showthread.php?t=1770698

[MOD] & [HOWTO] CM9 / ICS Pattern Lockscreen w/o emergency call button

As the title says this MOD will remove your emergency call button in the pattern lockscreen.
I´ve modified the Pattern Lockscreen this way the button diasppears. So no more unwanted emergency calls while you have your phone in your pocket.
Just remember. Noone else will be able to call with your phone in case of emergency unless he/she knows how to unlock your phone.
Since there are various custom ROMs with a modified framework and since the framework in Arcos CM9 may differ in each release, I decided to write a little HOWTO.
First you need is my modified pattern lockscreen xml file you can download here:
Rapidshare or Dropbox
Extract it and copy the framework-res.apk from your phone or your flashable ROM to your PC.
Open the framework-res.apk with 7zip and navigate to the res\layout folder there.
Copy and paste my keyguard_screen_unlock_portrait.xml into this folder to replace the current xml file there.
Close 7zip and move the modified framework-res.apk to your sdcard.
Move it to the system folder in your phone and set the permissions to rw-r-r.
Use Root Explorer for the following step!
After the permissions were set correctly, move it to the framework folder and reboot your phone.
That´s all.
Below is a flashable Zip for Arcos beta3.
Rapidshare
Dropbox Mirror

yow honey!
you rock!
-salute!

By only for the vanilla cm9 by arco, do you mean that it won't work on the roms based on it like biohazard?
Sent from my GT-I8150 using xda app-developers app

Gary122 said:
By only for the vanilla cm9 by arco, do you mean that it won't work on the roms based on it like biohazard?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Well. The modification is inside the vanilla framework and this mod is flashing the modified vanilla framework, so can´t tell. But as long as the framework isn´t modified there, it will. Unfortunally a lot of custom ROMs are using modified frameworks. These would need to be modified as well.

honeyx said:
Well. The modification is inside the vanilla framework and this mod is flashing the modified vanilla framework, so can´t tell. But as long as the framework isn´t modified there, it will. Unfortunally a lot of custom ROMs are using modified frameworks. These would need to be modified as well.
Click to expand...
Click to collapse
I tried it on my biohazard it works! Thanks bro.
Sent from my GT-I8150 using xda app-developers app

[Q] build prop

How do i edit my build.prop to make it at&t again? im using a verizon multicarrier rom and people said select verizon then install it, chane the framework res apk and then edit the build.prop . How do i change t to AT&T?

Tyler.Boston1 said:
How do i edit my build.prop to make it at&t again? im using a verizon multicarrier rom and people said select verizon then install it, chane the framework res apk and then edit the build.prop . How do i change t to AT&T?
Click to expand...
Click to collapse
Make a nandroid.
Use root explorer or adb only to edit the build.prop (located in /system) and change your device values to:
ro.product.model=SAMSUNG-SGH-I747
ro.product.name=d2uc
ro.product.device=d2att
Reboot.