OK so i partitioned my 32 gig sandisk sd card to about 1.2 gigs of space for the A2SD now im wondering im about to flash the new update of Decks reloaded i know this is a dumb question i should already know but im new to the whole A2SD thing, so i was wondering after i have already partitioned for decks reloaded .44 can i just leave my SD card alone and run the A2SD in Aroma for the new update with .500 with no worries of having to mess with the SD cards partition or do i need to run the format all zip file and re partition?
Reloaded. 500 doesn't use aroma to install anything its a basic rom flash, sooo you will have to find dta2sd and flash that after the rom and gapps. I believe in the second or third post of the rom thread is a link to the respective a2sd you would flash. But to answer your question you do not have to repartition, and furthermore if you would like to not download all of your applications, then in smelkus mod recovery do superwipe, wipe all temp. Files. Then flash rom gapps and dta2sd, and I would recommend Masons g .15 rc4 kernel as well. Hope that helps you out brotha
Sent from my PC36100 using xda app-developers app
fo sho
Well i dont really have a problem with the apps reinstalling them from Titanium backup is that what you ment by or just having to download from market dont bother me a bit but thanks for the reply dude and i usually use hipkatts wipe method tends to work very nice i have the most updated version of the semleksmod recovery. But if your saying i can just do a super wipe and not wipe all the apps i have installed that would be kewl i guess save me some time haha
also
im getting tired of having to use drop box to move all my **** on the SD card usually i just use my buddies computer and put my SD card into the little adapter and put the files from their directly on the sd card easyer then using the phones USB option but my laptop never recognizes my phone i need to install the drivers for the evo lol i can never find them.
Restles said:
im getting tired of having to use drop box to move all my **** on the SD card usually i just use my buddies computer and put my SD card into the little adapter and put the files from their directly on the sd card easyer then using the phones USB option but my laptop never recognizes my phone i need to install the drivers for the evo lol i can never find them.
Click to expand...
Click to collapse
Here. Install this, then uninstall it. It'll keep the drivers on your computer
HTC Sync
word
thanks hipkat (hits thank button)
Restles said:
thanks hipkat (hits thank button)
Click to expand...
Click to collapse
No prob, mate
Drivers are there
Ok so i did what you said to do but i just got my laptop back and I just went to plug my phone in and its still is not recognizing my phone. The drivers are there but when i plug my phone in it says "a usb port has malfunctioned and can not recognize this device" what is wrong here my phone is rooted and running decks reloaded .44. Do i need to run the android sdk and get the ADB drivers or what im tottally lost ive been resorting to drop box for so long
Restles said:
Ok so i did what you said to do but i just got my laptop back and I just went to plug my phone in and its still is not recognizing my phone. The drivers are there but when i plug my phone in it says "a usb port has malfunctioned and can not recognize this device" what is wrong here my phone is rooted and running decks reloaded .44. Do i need to run the android sdk and get the ADB drivers or what im tottally lost ive been resorting to drop box for so long
Click to expand...
Click to collapse
Try updating your HTC Sync Drivers. Also try a different USB cable. I've had issues like this with knock-off USB cables.
TEAM MiK
MikROMs Since 3/13/11
thanks for reply
Ok so should i update the drivers by installing HTC sync again then updating them through htc, then uninstall HTC and try again with a HTC USB cable im using one from a black berry.
Just open HTC Sync, and Update it. Also definitely switch to the HTC USB Cable.
TEAM MiK
MikROMs Since 3/13/11
I don't know if my SDC card is partitioned right or not. I have just made a NAND backup, and was going to format my SDC with smelkusMOD to Swap 32mb Ext4 768mb. Now my question is this, once I format, and reinstall my back up, will my partitions change? What will happen? If nothing happens to the partition, and I decide that I need to extend the ext4 partition, can I?
gsx1000r02 said:
I don't know if my SDC card is partitioned right or not. I have just made a NAND backup, and was going to format my SDC with smelkusMOD to Swap 32mb Ext4 768mb. Now my question is this, once I format, and reinstall my back up, will my partitions change? What will happen? If nothing happens to the partition, and I decide that I need to extend the ext4 partition, can I?
Click to expand...
Click to collapse
Do you mean you want to Partition your card to have an A2SD Ext. Partition ? If so I would just make an Ext.4 partition from the jump. Also I would suggest making the Partition slightly larger than you think you'll ever need it. That way the likely hood of having to ever do it again is reduced. Unless you change SD Cards. As for your backup, it will be exactly as it was when you made it. If there was no SD ext Partition when you made it, it will not show up. The SD Card will still be Partitioned, it will just not be activated on the Rom.
thanks for all the info
Your welcome
TEAM MiK
MikROMs Since 3/13/11
gsx1000r02 said:
I don't know if my SDC card is partitioned right or not. I have just made a NAND backup, and was going to format my SDC with smelkusMOD to Swap 32mb Ext4 768mb. Now my question is this, once I format, and reinstall my back up, will my partitions change? What will happen? If nothing happens to the partition, and I decide that I need to extend the ext4 partition, can I?
Click to expand...
Click to collapse
There is no need for swap also. Most put their partition to ext. 4 1024 MB.
Sent from my PC36100 using xda app-developers app
Related
Hi guys,
I couldn't find anything about this (I did try searching before posting this thread, so I hope I am not repeating a common question!).... I wish to unpartition my sd card and just go back to a normal fat32 partition....
So far I have tired windows disk management and Rom Manager, which just allows you to ADD a ext partition with no luck!
Can anyone else guide me how to achieve this?
Regards!
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
cargobr151 said:
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
Click to expand...
Click to collapse
:O Thanks, which recovery should I be using? :s
System recover? clockworkmod using the fake flash method? because I don't see the Partition SD Card menu anywhere else and i've tried both!
I know its right in front of me somewhere, I just can't see it, D'oh!
use the one from rooting folder
Bah,
I ended up using GPart live cd to undo it!!
Thanks for the responses guys, hopefully this will help someone else who needs it!
cargobr151 said:
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
Click to expand...
Click to collapse
Sorry for using your thread, however I don't have that Partition SD Card option on my Desire, when I go into recovery?
jacobtc said:
Sorry for using your thread, however I don't have that Partition SD Card option on my Desire, when I go into recovery?
Click to expand...
Click to collapse
That's fine, it's why I created the thread!
If you just want to partition you can use ROM Manager (but this requires root)
you need the recovery file (entitled 'pushfiles' or something) from the risk-free root package to partition/un-partition the card.
Else, you can use a GPart live CD, which makes it really easy!
Hope that helps buddy...
r5ingh said:
That's fine, it's why I created the thread!
If you just want to partition you can use ROM Manager (but this requires root)
you need the recovery file (entitled 'pushfiles' or something) from the risk-free root package to partition/un-partition the card.
Else, you can use a GPart live CD, which makes it really easy!
Hope that helps buddy...
Click to expand...
Click to collapse
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
However in recovery, when I try to mount sd-ext it fails to do so Don't know why...
jacobtc said:
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
However in recovery, when I try to mount sd-ext it fails to do so Don't know why...
Click to expand...
Click to collapse
If you're using a2sd+ then you need to change your ext2 partition to ext3, Also, I don't believe that you need a swap partition anymore...
Try that!
r5ingh said:
If you're using a2sd+ then you need to change your ext2 partition to ext3, Also, I don't believe that you need a swap partition anymore...
Try that!
Click to expand...
Click to collapse
Cool, now I can mount the ext partition in recovery! Thanks!
jacobtc said:
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
Click to expand...
Click to collapse
Was that a 16gb card or a 265gb?
Sent from my HTC Desire using XDA App
GANJDROID said:
Was that a 16gb card or a 265gb?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
lol, lets give the guy a break.... we all know it was a 256GB Flash card!
Anywhooo, I have another question, so I think i'll hijack my own thread!
Guys, whats the most efficient way to backup/restore and move apps between roms? I've ended up manually re-installing installed apps 2/3 times now, I was going between roms that did/didn't support a2sd. Also, should there be any consideration to any specific backup options available in the various tools?
Thanks in advance!
Hi, my phone got bricked using GPart live to turn my ext 2 into a 3 partition. Everything went fine using the program, turned off Usb storage, went into market and tried to download a program, when it started to install the screen when black.
Now I cant boot with sdcard in, I don't come past the white HTC screen
Without SDcard it starts loading the system but the loading is a never ending loop.
Tried to format SD with fakeflash, dosent help
Tried reflashing my rom with wipe and everything, dosent help
Any ideas?
prove said:
Hi, my phone got bricked using GPart live to turn my ext 2 into a 3 partition. Everything went fine using the program, turned off Usb storage, went into market and tried to download a program, when it started to install the screen when black.
Now I cant boot with sdcard in, I don't come past the white HTC screen
Without SDcard it starts loading the system but the loading is a never ending loop.
Tried to format SD with fakeflash, dosent help
Tried reflashing my rom with wipe and everything, dosent help
Any ideas?
Click to expand...
Click to collapse
I would say, firstly try to get your phone working by wiping it clean and re flashing the rom. Use a different memory card just to get up and running. Then you can concentrate on fixing you card..
Although that seems like a very strange issue, are you sure you formatted your card correctly with GPart? (eg, exactly 512 MB/1024MB?) I'm a n00b myself so I would also wait for some of the more experienced users to offer their input. lol
r5ingh said:
I would say, firstly try to get your phone working by wiping it clean and re flashing the rom. Use a different memory card just to get up and running. Then you can concentrate on fixing you card..
Although that seems like a very strange issue, are you sure you formatted your card correctly with GPart? (eg, exactly 512 MB/1024MB?) I'm a n00b myself so I would also wait for some of the more experienced users to offer their input. lol
Click to expand...
Click to collapse
Solved it by using AM recovery, repair + new partition solved the problem! Gonna reflash 2.0 again since i messed up the wiping somehow and then keep this until the rooted 2.2 is out!
Hi All,
I have a problem with my SD card. My phone doesn't recognise SD card after I created ext4 partition through partition magic on windows 7. Here is what happened.
- I have rooted desire running CM 7.0.3.
- I wanted to go back to Starburst 1.4 rom.
- I have class 4 16 gb sd card (fat + ext3) with 512 mb of ext3 and rest fat32 (this was when everything was running good)
- I flashed the new rom through CWM, but only got like 54 mb on sd left.
- So I manually formatted ext3 and changed it to ext4 using partition magic on windows 7 (connected sd card through a reader).
- After that I flashed the new rom, but still got the same size left.
- After that I went back to CM7.0.3 which is working fine for me.
However, at this time, my phone doesn't recognise my SD card.
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
I believe I was able to install CM7.0.3 coz it was a small rom was fit directly into phone's internal memory.
At this time, I can't see my SD card on phone. Can't play music or install any files or anything.
Looking for some quick help.
Thanks,
Satyam
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
topgunmatt said:
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
Click to expand...
Click to collapse
Hi Matt,
So are you saying that you got your SD card formatted by someone else using Rom Manager ?
- As of now, when I click on the inbuilt ROM Manager in CM7, it says " The SD Card needs to be mounted to use ROM Manager!"
That means my SD card is abviously not read by my phone.
Looking for some help. I don't want to do something silly at this time.
Atleast, as of now my phone is not bricked and is working, just the SD is not.
Any suggestions/comments or link to my problem is more than welcome.
Thank You
Hmmm, i smell another usb brick here, we've had so many these days, and all by people using cwm and flashing gb sense roms...just to prove i'm right, can you connect the phone to your pc? If you're not able to do that, then u have 100% chance it's a usb brick.
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
sroy001 said:
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
Click to expand...
Click to collapse
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
vnvman said:
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
Click to expand...
Click to collapse
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
sroy001 said:
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
Click to expand...
Click to collapse
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
i just fixed my brick lol . i found out bcuz i coulnt enable bluetooth
vnvman said:
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
Click to expand...
Click to collapse
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
sroy001 said:
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
Click to expand...
Click to collapse
Also just want to let the forum know that I'm running a custom ROM (CM 7) and don't see the option of software info under Settings>About phone. Any other way to find out rom version ???????/
Ok, sorry man, i was out for a ride
To see the CID you have to type "fastboot oem boot" in the terminal, after navigating to the path where you have the sdk, for example:
"cd c:/sdk/tools"
"fastboot oem boot"
Then you should get all the info, together with the CID ofc...obviously you need to have adb installed and working in order to do that (there ia a lot of tutorials for that, just use the search function).
As to rom version, you don't need it, just download the mtd0.img, open it with the hex editor and mod it with your CID, then go for the next step
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
vis-tec said:
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
Click to expand...
Click to collapse
It's a usb brick, not a plain brick: when you plug it to pc the phone usually doesn't even light up the led.
sorry, i read that he had full use of his phone bar the SD card
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
Click to expand...
Click to collapse
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
hi, still me sorry for spamming, just found a nice TUT using gparted on xda http://forum.xda-developers.com/showthread.php?t=535914
fragargon said:
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
Click to expand...
Click to collapse
Fixing misc doesn't take more than a minute if you have a working adb...repartitioning micro sd card takes loads of time instead, especially if it's big, coz you have to backup all of your data then copy them back, and that's a pain, especially if the sd isn't very fast.
Anyway you might be right there, just the other day a guy had a similar issue caused by multiple ext partitions not being recognized properly. I just thought it was a usb brick coz it's very common since the new gb sense roms rolled out and people started partitioning like crazy with cwm (which really SUCKS at that), and this either cause misc corruption or messed partitions on sd card: i'd suggest everyone to partition with amon them flash back any 3.0+ cwm to flash the rom, if you don't have the chance of using linux live cd (but you really should).
All sorted --------- RESLOVED !!!!
Okay Listen all Desire Owners-- I was able to fix this USB brick without having to go through all which was available on internet..
What I did -
1) Came home and formatted my EXT4 to ext3 and simply reflashed cm7 rom
All worked like charm - Now My SD card is mountable and works perfectly
Good for you
Anyway make sure you set up adb properly on your pc, it will save your life some day: it takes a while but it's worth it...i wouldn't get inti the rom flashing thing without it. Just a suggestion
Bests.
I would like to partition my SD card in order to take advantage of memory tweaks like link2SD and dalvid2cache. I have read that you can use tools like Minitool partition wizard as well as some that are installed when you root your phone. Is there any way I can partition my SD card without having to take it out of the phone? It is kind of a pain to remove covers on the play just to get to the SD card. Besides, I worry that I might break the cover.
Also, I read somewhere that link2SD required non nand-locked (or S-off) to work. Is this true? Does this even apply to the play?
btw, I am using a rooted, stock 2.3.3 R800at
Mount the sdcard to Windows & run Minitool Partition Wizard. Resize the FAT32 partition & make an EXT4 partition of any size you'd like. Unmount it from from the PC & run Link2SD.
Link2SD doesn't require S-OFF for the Play.
To mount it, is it just the normal state when you plug in the usb cord to the PC? ie, mass storage mode? or do I need to unmount the sd card in settings somewhere first. Just want to make sure I get the order right.
What would a good size ext4 partition be on a 16 gb card?
Mass storage mode is fine. Doing so in CWM is probably better though since the OS isn't trying to access anything.
2~4GB should be fine.
Can I use CWM if I only have root? I haven't done anything other than just root via zergrush and use titanium to backup/remove a few apps.
Also, on sort of a side note, is there any program that will sync the contents of my SD card (all of them) with a corresponding folder on my PC? I know SD cards can die on you, so I would like to perform this sync on a regular basis to try and prevent phone throwing when the SD card dies.
ROM Manager.
I hate to be the guy that asks a lot of questions that should be obvious, but how does ROM Manager answer my above questions? I hope that doesn't come across as rude, I meant it from my ignorant standpoint. I looked up the app on Google Play, and it sounds like it is used for backing up your current ROM, loading new ones, and a couple of other ROM related features.
Fuegeaux said:
Can I use CWM if I only have root? I haven't done anything other than just root via zergrush and use titanium to backup/remove a few apps.
Also, on sort of a side note, is there any program that will sync the contents of my SD card (all of them) with a corresponding folder on my PC? I know SD cards can die on you, so I would like to perform this sync on a regular basis to try and prevent phone throwing when the SD card dies.
Click to expand...
Click to collapse
If you get CWM installed, you can mount the sdcard while in recovery.
Use SyncToy to do the syncing
http://www.everything-microsoft.com...our-windows7-files-and-folders-using-synctoy/
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=15155
What's the difference between Rom Manager and CWM? Thanks again!
Fuegeaux said:
What's the difference between Rom Manager and CWM? Thanks again!
Click to expand...
Click to collapse
ROM Manager = Android app that works with CWM. Installs CWM on phones that support it. Xperia Play isn't supported for CWM installation from the ROM Manager but the other features within it do work.
CWM = recovery image that boots when invoked via ROM Manager or at the bootloader/kernel.
Ah, so I use Rom Manager to invoke CWM-like functionality, one of which is to mount SD card when the system is able to access it, right?
Fuegeaux said:
Ah, so I use Rom Manager to invoke CWM-like functionality, one of which is to mount SD card when the system is able to access it, right?
Click to expand...
Click to collapse
No... you need to get into recovery mode to access CWM properly. The ROM Manager can reboot the phone to get into that mode.
I downloaded ROM Manager from the market. I see two options in ROM Manager that I think are what you are talking about. The first one is under Recovery->Reboot into Recovery. The second one is Utitilities->Partition SD Card. Can I just check the Parition SD Card option or do I need to Reboot into recovery first? Also, above Reboot into Recovery, there is an option which says "Flash ClockworkMod Recovery. You must have the ClockwordMod Recovery installed to flash and restory ROMs!" But you said that the Xperia Play does not support this. I assume that I don't need to do this. (but, for future reference, I can't use ROM Manager to flash ROMs, right?)
First off, do I even need minitool Partition wizard if ROM Manager will do it for me using the Partition SD card option? Will that let me do ext4 as well as FAT32 and select differing sizes?
Second, if Partition SD card will not do what I want it to do, or do it fully, then what are the steps to do? My thought is plug phone into PC. Use ROM Manager to reboot into Recovery (using ROM Manager option). Once PC detects SD card, use Minitool Partition wizard to reformat/partition SD card with FAT32 for main portion and EXT4 for seperate portion for Link2SD use.
Will EXT4 also work for the dalvik2cache tweak?
Sorry for all of the questions and thanks again for all the help!
You need to have CWM installed that's made specifically for the Play. It CAN'T be installed from the ROM Manager.
Use this app to install it
https://play.google.com/store/apps/details?id=com.pvy.CWMinstaler
The Partition SD Card option will erase everything on the SD card & it creates a small EXT2 or EXT3 partition. I don't recommend using it.
Use the Minitool & do as I recommended earlier on...
Don't mix dalvik2cache with any sdext script... I recommend using Link2SD or mount2SD apps for utilizing the ext4 partition to move the dalvik-cache.
I will test these things out when I get home today, or maybe this weekend if I can't find free time before then.
One thing I noticed when I went to the thread mentioned in the Xperia CWM app is that in big red letters it says "Do NOT use this recovery if you are not using stock 2.3 firmware". I guess that means when ICS comes out from Sony, we won't be able to upgrade through ROM Manager, right? This also means that going from 2.3.3 to 2.3.4 would be okay using this version of CWM, right?
Also, if I wanted to upgrade to a 2.3.4 build, then ROM manager is the way to go, right?
Thanks again!!
I can't use the ROM Manager with ICS until something changes. Upgrading through CWM is always possible though, just as long as you know that spamming the home key (about 10 times) at system startup will get you into it.
Yes, ROM Manager/CWM Recovery can take care of any upgrades that don't involve flashmode or fastboot mode (ftf, img, & sin files).
Thanks again for all of your help. I find myself having more questions about ROMs, but that is kinda hijacking my own thread. Plus, I don't think I am ready to flash any ROMs just yet. I don't know, it just makes me kinda nervous doing that, plus it is a big pain having to redownload all of my apps and setting things up again.
I will try and partition my SD card soon and report back with the results.
Use Titanium Backup to capture all of your settings with the apps. Quite simple to achieve.
All right, so I finally repartitioned my SD card. I had to use FAT32 for the second partition because Link2SD did not recognize the EXT4 partition. I did make the mistake of not putting it as primary, but I fixed this and it still didn't work.
It looks like all is working, but I can't seem to link the davlik cache over, though it acts like there is none. Could I clean up the davlik cache and would that make any problems? It just seems like there is still a lot of memory being used and I can't figure out where it is coming from.
Fuegeaux said:
I would like to partition my SD card in order to take advantage of memory tweaks like link2SD and dalvid2cache. I have read that you can use tools like Minitool partition wizard as well as some that are installed when you root your phone. Is there any way I can partition my SD card without having to take it out of the phone? It is kind of a pain to remove covers on the play just to get to the SD card. Besides, I worry that I might break the cover.
Also, I read somewhere that link2SD required non nand-locked (or S-off) to work. Is this true? Does this even apply to the play?
btw, I am using a rooted, stock 2.3.3 R800at
Click to expand...
Click to collapse
connect your sd card to computer and use minitool partition wizard to partition your card. it is so convenient and easy to operate.
Hello,
I am a noob and I hate myself.
I recently purchased a second hand HTC Desire with Lee Droid on it. Everything was working fine.Then the phone asked my if I wanted to update? I tried to update but it would not work. Then after a while it stopped asking me to update. Then a little while later it was on a start up loop. I took out the SD card and it work but I had no apps, etc.
Now I have a serious problem with internal storage. I did a factory reset (still has the Lee Droid ROM on it) and it shows I have 92mb of internal storage...instead of up to 1GB!
So....I decided to try a few things. After doing a bit of quick reading I decided to go with the original HTC Sense software. In trying to do this I get a 140 bootloader error...so I must be using the wrong ROM?
Getting slightly more frustrated now...
I figured out I had to partition the original SD card again to get it working and that had worked but now I only have 112mb of internal storage using that Sd Card (I had purchased another one when this stopped working). So the internal storage issue still applies. And the main thing with this for me is that apps such as facebook and more will not transfer to the SD card whereas I thought I could do this before? So even to have Facebook on it and upgrade the apps with the phone gives me a 'low memeory' notification.
SO I guess my question is..
Should I just go back to HTC Sense and what ROM do I use?
or
Should I try out a different ROM?
Bear in mind I did not flash the phone originally, and while not a complete computer noob I would be quiet nervous about doing this with out some experienced help.
Everything you need to know is here
http://forum.xda-developers.com/showthread.php?t=809328
As a rough guide:
When you format your card you need an ext partition of say 1gb for app storage space (a2sd). The rest of the card should be fat32. This is to solve your low memory issues.
Download the custom rom of your choice to the fat32 partition of the sd card and boot the phone into recovery (volume down and power button then choose recovery). You probably have clockwork mod recovery or similar. Choose the option install zip from SD card.
Before you do this, in recovery you should wipe the dalvik cache and perform a wipe/factory reset.
Depending on the rom you use you will probably need to download and flash and a2sd script such as darktremour. This will make downloaded apps save to the ext partition automatically rather than to the phone memory.
It is worth doing as much reading up as poss before embarking on this and make sure you have enough charge in your phone when flashing or you might end up with a brick!
As for the choice of rom you need to decide if you want a rom with HTC sense included or an AOSP rom.
Sent from my HTC Desire using xda app-developers app
Ok thanks. Do you know any way I can find out which HTC Sense ROM is for my phone?
No matter what I do the internal memory is always lower than 120mb. It should be 512mb max right? I just did a factory reset again and it's at 77mb without any apps installed ot gmail or facebook profiles added! It these any way to fix this first off before I read more into flashing the phone with a different ROM?
Centurionmark said:
Ok thanks. Do you know any way I can find out which HTC Sense ROM is for my phone?
No matter what I do the internal memory is always lower than 120mb. It should be 512mb max right? I just did a factory reset again and it's at 77mb without any apps installed ot gmail or facebook profiles added! It these any way to fix this first off before I read more into flashing the phone with a different ROM?
Click to expand...
Click to collapse
Unless u use a2sd,ad2sd,int2sd or some script to move something to your sd partition,
you aren't going to have any more memory.
I think I should really go back to Sense before I do anything else or drive myself mad!
I tried another Sense ROM and it says I need to have my battery over 30pc but it's nearly fully charged!!!
colin_404 said:
Unless u use a2sd,ad2sd,int2sd or some script to move something to your sd partition,
you aren't going to have any more memory.
Click to expand...
Click to collapse
But I had more internal memory before. How do I install these?
And how can I find out what Sense ROM is for my phone?
I have downloaded the app 2 sd and done the sdk thing...
but it still does not solve my internal memory issue and why was it so big before on a rooted phone? The phone is still rooted. So it should be the same? Do I need to get my SD card to count as internal storage somehow. Any links?
Centurionmark said:
I have downloaded the app 2 sd and done the sdk thing...
but it still does not solve my internal memory issue and why was it so big before on a rooted phone? The phone is still rooted. So it should be the same? Do I need to get my SD card to count as internal storage somehow. Any links?
Click to expand...
Click to collapse
The guides for installing the customs roms u download r probably in the rom thread where the rom came from.
If it says ur battery is < 30% then u r using a RUU and u will need the correct one for ur phone.
Or use the 2.3 Ruu upgrade for Desire from HTC/Dev.
I think this is your best solution - CM7 which is a great rom without HTC sense.
If you have not created your ext partition yet do this:
http://forum.xda-developers.com/showthread.php?t=932824
Then flash this rom:
http://download.cyanogenmod.com/?device=bravo&type=stable
Installation instructions for the rom are here:
http://forum.cyanogenmod.com/forum-36/announcement-23-cyanogenmod-72-released-2012-jun-16/
Then install S2E from the play store. This includes an a2sd script and has tick boxes to chose what to send to your SD ext partition.
Then you are done
Sent from my HTC Desire using xda app-developers app
hans moleman said:
I think this is your best solution - CM7 which is a great rom without HTC sense.
If you have not created your ext partition yet do this:
http://forum.xda-developers.com/showthread.php?t=932824
Then flash this rom:
http://download.cyanogenmod.com/?device=bravo&type=stable
Installation instructions for the rom are here:
http://forum.cyanogenmod.com/forum-36/announcement-23-cyanogenmod-72-released-2012-jun-16/
Then install S2E from the play store. This includes an a2sd script and has tick boxes to chose what to send to your SD ext partition.
Then you are done
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
OK...a friend did the following:
Updated my android because I was still on 2.2
Updated the root to Andreev
Installed Ice Cream Sandwich...the current BETA I think...which works fine but lately the phone freezes sometimes
First I thought you were on about memory to SD swap apps on the market so I did a bit of reading. I installed S2E but cannot or do not know how to get it working. It asked me to install something else which kept giving me a 'cannot respond' message.
I tried to install A2SDGUI as per some guide but it says that either my phone is not rooted, I do not have an EXT partition or A2sd scripts are not installed.
I tried to install EXTions on both my SD cards both manually using partition software and using ROM Manager. They both show up as having a regular FAT32 partition, and EXT one and a Linux one. They still do not work.
I have tried using various different partition softwares and my head is in a spin form them and different guides. I cannot get Gparted to work, how do I get the Image from the download or install it on my PC?
I also think I have moved my Dalvik Cache to my original SD card and not the phone tells me I have 141mb free internal memory but I get 'insufficient space' messages when trying to download apps or update them. Since I did this, even when putting on my manual SD backup from my new SD card back onto it I get messages saying 'app does not exist, even on the Play Market one. Play Market works fine on the original SD card which I think I have moved the Dalvik cache to.
There is also no nandroid backup on the new SD card as I get an error message...
Please please please someone help me. All I want to do now is get more internal memory and have everything working with my new 4GB SD card in the phone. Thanks to everyone who posted links to guides but I am still getting to terms with some of the terminology and may need guides to do some of the things that are listed in the guides. As it is now I cannot download any new apps. When the phone was rooted to Ice Cream Sandwich I could only download about 3 apps and cannot update youtube, maps, google, mail, etc.
Centurionmark said:
OK...a friend did the following:
Updated my android because I was still on 2.2
Updated the root to Andreev
Installed Ice Cream Sandwich...the current BETA I think...which works fine but lately the phone freezes sometimes
First I thought you were on about memory to SD swap apps on the market so I did a bit of reading. I installed S2E but cannot or do not know how to get it working. It asked me to install something else which kept giving me a 'cannot respond' message.
I tried to install A2SDGUI as per some guide but it says that either my phone is not rooted, I do not have an EXT partition or A2sd scripts are not installed.
I tried to install EXTions on both my SD cards both manually using partition software and using ROM Manager. They both show up as having a regular FAT32 partition, and EXT one and a Linux one. They still do not work.
I have tried using various different partition softwares and my head is in a spin form them and different guides. I cannot get Gparted to work, how do I get the Image from the download or install it on my PC?
I also think I have moved my Dalvik Cache to my original SD card and not the phone tells me I have 141mb free internal memory but I get 'insufficient space' messages when trying to download apps or update them. Since I did this, even when putting on my manual SD backup from my new SD card back onto it I get messages saying 'app does not exist, even on the Play Market one. Play Market works fine on the original SD card which I think I have moved the Dalvik cache to.
There is also no nandroid backup on the new SD card as I get an error message...
Please please please someone help me. All I want to do now is get more internal memory and have everything working with my new 4GB SD card in the phone. Thanks to everyone who posted links to guides but I am still getting to terms with some of the terminology and may need guides to do some of the things that are listed in the guides. As it is now I cannot download any new apps. When the phone was rooted to Ice Cream Sandwich I could only download about 3 apps and cannot update youtube, maps, google, mail, etc.
Click to expand...
Click to collapse
I forgot to mention I also installed the a2sd scripts in the Terminal but still no joy.
Centurionmark said:
I forgot to mention I also installed the a2sd scripts in the Terminal but still no joy.
Click to expand...
Click to collapse
Most of the scripts will show your internal storage as normal, then report a a2sd partion.
The only two that report your internal AND est partion as one block are data2sd, and the ammurlez script. Both of these are flashable with Lee Droid, but afterwards. If you did a factory reset this would restore your Lee Droid ROM but wipe your data2sd or ammurlez script. This is why before updating anything, or flashing a new zip CWM backups are your friend.
Just "factory reset" it again, this DOES NOT" change your hboot or SD partions, then flash the ammurlez or data2sd scripts. Your phone will be as before reporting 1gb internal memory.
Or......play with all the awesome ROM and script possibilities on this forum till you find a setup you love......speed versus storage, sense versus aosop versus mui etc.
Most peoples signatures list their setup, try em all!
Sent from my HTC Desire using Tapatalk 2
The gparped image needs to be burned to cd rom. Just google how to do it. Then boot your pc with the cd in the drive and gparted will load up.
If you follow the guide I left earlier methodically step by step using the actual rom suggested it should work. Please note S2E only works on CM7 or CM9 roms only.
If try CM7 and don't like it you can flash something else after but at least you will have everything working and also gain an understanding of the steps you need to go through to do it.
Sent from my HTC Desire using xda app-developers app
Hi There,
First off, this is my second time installing a custom ROM and I had someone else Root this phone but I used revolutionary to S-Off. I haven't installed a custom kernel and it's running clockworkmod 2.5.07.
I flashed and installed PARANOIDANDROID Woh 4.2.2 -------------------------------------->[v. 3.10b2/7th/March/2013] as per the instructions. Before starting I formatted the microsd card to 512mb of EXT4 with remaining 6.whatever Gig's of Fat32 (I used Minitool Partition Wizard on Win 7). Both were set as primary, while Fat32 was set to active, EXT4 was set to none (didn't think it made a difference?).
Everything installed fine, however, I first noticed issue when i went to run the terminal script for a2sd and it said it was read only (as attached). I tried to change permission to read/write and that didn't work. Then I realized after mounting USB storage connecting to Win 7 and opening Minitool Partition (because sd wouldn't show in My Computer) that all that was left on the micro sd was the FAT32 partition and nothing else.
So where do I go from here? I haven't added any Google account yet or did much else because there is only 14.65MB on internal now and I obviously can't send anything to sd and although I thought GAPPS went to sd in some form I guess not.
Can I recreate the EXT4 and push anything that was originally supposed to be on that partition onto it and then start installing apps there?... or do I need to repartition and reflash everything?
Also if I need to reflash, how can I ensure the same thing doesn't happen with the micro sd?
CWM wasn't formatting when I was trying to partition from Cyanogenmod 7 running Gingerbread (although then I read that CWM has bugs and could patition NAND and brick phone) so Minitool was my only sort of n00b option despite that I was having some issues but it seemed to be all fine before flashing 4.2.2.
Hopefully the attached photos will provide any further info you need to help.
Truly appreciate your help! This is my GF's Desire and I've been in the dog house playing with it all week (Cyanmod 7 was killing battery and was buggy, even stable version).
Thanks in advance once again!
** UPDATE ***
I just used my SD adapter directly into Win 7 and it's showing both partitions in Minitool and the Fat32 is available in My Computer showing music folders etc. However, the script for A2sd still never worked in Terminal Emulator saying "sh: can't create N: read-only file system"
So it appears the partition and the data is there and available but does the above message mean I can't send apps to the sd because it's read only?
Thanks again :S
Well one of your mistakes may have been using mini tool partition wizard. Many users have reported it's unreliability, and i've also had bad experiences with it in the past.
I would recommend using gparted to delete all partitions, and then using it to format the whole card to fat32.
Then install 4ext recovery instead of cwm, and use that create the ext4 partition.
If you need help on installing+using 4ext to create the sd-ext partition check out this guide
Finally do a full wipe, reflash the ROM, and activate a2sd through terminal emulator using:
Code:
su
a2sd install
y
n
y
Sent from my HTC Desire using xda app-developers app
chromium96 said:
Well one of your mistakes may have been using mini tool partition wizard. Many users have reported it's unreliability, and i've also had bad experiences with it in the past.
I would recommend using gparted to delete all partitions, and then using it to format the whole card to fat32.
Then install 4ext recovery instead of cwm, and use that create the ext4 partition.
If you need help on installing+using 4ext to create the sd-ext partition check out this guide
Finally do a full wipe, reflash the ROM, and activate a2sd through terminal emulator using:
Code:
su
a2sd install
y
n
y
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Actually, I just ran your terminal codes above and that worked without reformatting or flashing!! It moved something like 94 or 96 apps and now shows 139 MB of internal storage!! Wow, I'm sooo excited. Imagine a n00b installing the latest version of Android on what is basically the original Android flagship HTC Desire/Nexus One!
BTW Should the developer maybe update with your script above vs the one listed which didn't work for me?
You guys rock!
I will start using GParted though and I assume using the liveimage USB would be best for me.
Now, I have to decide if I want to root my S3. I have 6 months left of my 1 year warranty so that's the only reason I've been debating it. Although most people say they've never heard Samsung not doing hardware repair just because a device is rooted. That sound about right?
Thanks Again!! So excited I'll end up using the old desire more than my S3!! lol
Gdroid1 said:
Actually, I just ran your terminal codes above and that worked without reformatting or flashing!! It moved something like 94 or 96 apps and now shows 139 MB of internal storage!! Wow, I'm sooo excited. Imagine a n00b installing the latest version of Android on what is basically the original Android flagship HTC Desire/Nexus One!
BTW Should the developer maybe update with your script above vs the one listed which didn't work for me?
You guys rock!
I will start using GParted though and I assume using the liveimage USB would be best for me.
Now, I have to decide if I want to root my S3. I have 6 months left of my 1 year warranty so that's the only reason I've been debating it. Although most people say they've never heard Samsung not doing hardware repair just because a device is rooted. That sound about right?
Thanks Again!! So excited I'll end up using the old desire more than my S3!! lol
Click to expand...
Click to collapse
lol no problem. You should root the s3. I just did it for my friends using a guide that doesnt trip the flash counter, therefore your warranty isnt voided. Press thanks if i helped
chromium96 said:
lol no problem. You should root the s3. I just did it for my friends using a guide that doesnt trip the flash counter, therefore your warranty isnt voided. Press thanks if i helped
Click to expand...
Click to collapse
Despite the fact that it's working now, should I indeed start from scratch before she's gets too comfortable with this? Flash recommended recovery and reformat sd and reflash everything? (since I originally formatted with Minitool)
BTW it appears that when we install apps will they appear to initially go to internal but after reboot they move to sd, is this actually what is happening and we should always reboot after installs and updates? I just installed about 8 apps and the internal shows it's down to 39mb but then upon reboot it's back up to 76.46 (Originally at 139 but I assume it's all app data consuming it).
Do you recommend anything to occasionally clear app data to ensure there is always space?
For the S3 I would love it if you provided a link to root without tripping the flash counter! Gesh, I love Android more and more everyday (never an issue without solution)... this community rocks!
Gdroid1 said:
Despite the fact that it's working now, should I indeed start from scratch before she's gets too comfortable with this? Flash recommended recovery and reformat sd and reflash everything? (since I originally formatted with Minitool)
BTW it appears that when we install apps will they appear to initially go to internal but after reboot they move to sd, is this actually what is happening and we should always reboot after installs and updates? I just installed about 8 apps and the internal shows it's down to 39mb but then upon reboot it's back up to 76.46 (Originally at 139 but I assume it's all app data consuming it).
Do you recommend anything to occasionally clear app data to ensure there is always space?
For the S3 I would love it if you provided a link to root without tripping the flash counter! Gesh, I love Android more and more everyday (never an issue without solution)... this community rocks!
Click to expand...
Click to collapse
I just tried installing one more app ROM Toolbox (only 8.something MB) and it said insufficent space despite showing the above amount just before install. Before installing or updating anything when I realized the ext was still there, it showed I had 267MB available and I only just installed about 45mb worth of apps, likely updated about 40MB as well. So the ext4 shouldn't be full yet. Could this actually be because of the poor partition?
Ya all that stuff shouldn't be happening. I'm using the same ROM and have non of these issues, so its likely the ext partition.
Your best bet is to start again, and do what I said a couple posts up.
Which S3 variant do u have?
Sent from my HTC Desire using xda app-developers app
Will do thanks. Btw, I'd love the link to the specific rooting method you used for the s3 workout tripping flash counter.
Thanks!
Sent from my SGH-I747M using xda app-developers app
Just missed you asking for my variant. I have the Telus mobility Canadian SGH-I747M.
Sent from my SGH-I747M using xda app-developers app
Gdroid1 said:
Just missed you asking for my variant. I have the Telus mobility Canadian SGH-I747M.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
here you go: http://forum.xda-developers.com/showthread.php?t=1739426
I'm going to attempt this now. First question is that the 4ext instructions say to download the updater, put on sd card and install. Then they instruct you to partition from there. They list the alternative as GParted.
You're saying to use GParted first and then install 4ext to partition. I just want to be sure on this but also if I format first, where I already have apps on sd will this mess anything up not allowing recovery flash or anything?
I suppose once I format the sd based on the current a2sd rom that only recovery will function. Just want to be sure on steps.
Thanks!
chromium96 said:
Well one of your mistakes may have been using mini tool partition wizard. Many users have reported it's unreliability, and i've also had bad experiences with it in the past.
I would recommend using gparted to delete all partitions, and then using it to format the whole card to fat32.
Then install 4ext recovery instead of cwm, and use that create the ext4 partition.
If you need help on installing+using 4ext to create the sd-ext partition check out this guide
Finally do a full wipe, reflash the ROM, and activate a2sd through terminal emulator using:
Code:
su
a2sd install
y
n
y
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Also just to be sure, the link from xda for instructions on gparted say a bootable cd, however usb seems easier, is that okay to use instead?
Thanks (I'm growing
Sent from my SGH-I747M using xda app-developers app
Gdroid1 said:
I'm going to attempt this now. First question is that the 4ext instructions say to download the updater, put on sd card and install. Then they instruct you to partition from there. They list the alternative as GParted.
You're saying to use GParted first and then install 4ext to partition. I just want to be sure on this but also if I format first, where I already have apps on sd will this mess anything up not allowing recovery flash or anything?
I suppose once I format the sd based on the current a2sd rom that only recovery will function. Just want to be sure on steps.
Thanks!
Click to expand...
Click to collapse
i said to use gparted to delete all the partitions, then use 4ext to make the ext partition. But now that i think about it, its probably more efficient to use gparted to do everything. So just follow the gparted method in the guide.
I would recommend creating a 1gb ext4 partition and whatevers left fat32. Also theres no need to make a swap partition for this rom.
Its perfectly fine to format the card even with the apps on it. Again just to recap this is basically what you should do:
1. Use gparted to completely wipe all partitions on the card just for a clean start, then create the fat32 and ext4 partitions (use the guide)
2. Once the partitioning is done, put the rom + and gapps on the card (on the fat32 partition)
3. Put the sd into the phone, boot into recovery and choose wipe data/factory reset, wipe cache partition, then go to advanced and wipe dalvik
4. Flash the rom and gapps
5. Once the rom is flashed reboot and give it a couple minutes to settle. Then run these commands in terminal:
Code:
su
a2sd install
y
n
y
6. From then on, all apps you install should automatically go to the ext partition. I'd also still recommend installing 4ext recovery...i find it better for the desire than cwm.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Gdroid1 said:
Also just to be sure, the link from xda for instructions on gparted say a bootable cd, however usb seems easier, is that okay to use instead?
Thanks (I'm growing
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
ya that should be fine. Just make sure you create the bootable usb properly by following the instructions from their site
Why go to the hassel of downloading and using gparted when u can just use 4ext recovery?? if u have a bad partition, 4ext will say ur partitions aint aligned properly or something then u just partition with 4ext recovery. sorted
jmcclue said:
Why go to the hassel of downloading and using gparted when u can just use 4ext recovery?? if u have a bad partition, 4ext will say ur partitions aint aligned properly or something then u just partition with 4ext recovery. sorted
Click to expand...
Click to collapse
he used minitool to partition the card which may have corrupted it. Wouldnt it be safer to start fresh using gparted to wipe all the partitions, so that he wont have any further issues in the future?
chromium96 said:
he used minitool to partition the card which may have corrupted it. Wouldnt it be safer to start fresh using gparted to wipe all the partitions, so that he wont have any further issues in the future?
Click to expand...
Click to collapse
minitool just doesnt align it properly, just use 4ext recovery. so all he has to do is save whatever from the sdcard to pc then partition sdcard with 4ext and it will be done right. trust me, if he flashes 4ext recovery then in recovery, goto tools and check partition alignment and i bet it will say ur partitions are not aligned properly. i tried minitool ages ago to see what all the fuss was about it being sh1te and 4ext said that my partitions aint aligned so i re partitioned with 4ext and all was fine again.
Well this is welcoming because 4ext seems much easier for a n00b like me if it'll work just as well.
I was going to do a 2gb ext4 partition, is that okay versus 1gb?
Btw do you recommend any custom kernel with the desire in this rom? I noticed it is a bit laggy at times and sometimes requires a few taps before certain things activate. Maybe kernels are a little too advanced for me now though?
Or maybe some cpu tweaks or anything. I do own ROM toolbox.
Sent from my SGH-I747M using xda app-developers app
Gdroid1 said:
Well this is welcoming because 4ext seems much easier for a n00b like me if it'll work just as well.
I was going to do a 2gb ext4 partition, is that okay versus 1gb?
Btw do you recommend any custom kernel with the desire in this rom? I noticed it is a bit laggy at times and sometimes requires a few taps before certain things activate. Maybe kernels are a little too advanced for me now though?
Or maybe some cpu tweaks or anything. I do own ROM toolbox.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Anything over 1.5gb for the ext partition is not recommended, so you probably shouldn't do 2gb.
The kernel that comes with the ROM is usually the best for the ROM, and theres not much you can do about the speed in jb roms. Ive tried the supercharger script but i honestly didnt notice any increase in speed. If your looking for a faster ROM use gingerbread.
Also dont mess around too much in rom toolbox if u dont know what your doing, you might get stuck in a boot loop and you will have to reflash the ROM.
All had worked out well and indeed the original minitool said the fat32 wasn't properly aligned. The only thing which keeps aborting is the calendar fix. I noticed chrominum's post about corrupted for our sd, redownload, check md5 and reflash. If doesn't work reformat sd, clear everything repartition and try again.
I did all that and same thing. It doesn't say why it won't work but just aborting per attached.
It did work for me previously in cwm. I only installed the last rc and not the testing version of 4ext.
Sent from my SGH-I747M using xda app-developers app
We were posting at the same time. I'm starting all over again with 1.5g and we'll also see if that helps the calendar fix work.
Thanks!
Sent from my SGH-I747M using xda app-developers app