I bought a used t989 online, and it's USB port is acting up. When it sits on the charger it will keep firing up beeping noises indicating charger connected/disconnected. I am not able to connect it for data transfer obviously. I try to hold it in every directiong but it has no effect. I assume my USB port is broken. Anything else I should try (I've tried 4 different cables, same behavior)?
How hard is it to replace this part? Does it require soldering? I've found it for sale online here http://www.ebay.com/itm/2X-SAMSUNG-...ro-USB-Charging-Port-/221131664862#vi-content unless anyone knows of a better outlet.
Many thanks
Here you go, hope this helps!
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-usb-port-repair/
LoopDoGG79 said:
Here you go, hope this helps!
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-usb-port-repair/
Click to expand...
Click to collapse
Well thanks, but it was something I hoped to do myself. Are you a rep for MTV? If the price could come down to 25 it would be less of a choice.
Donteventrii said:
Well thanks, but it was something I hoped to do myself. Are you a rep for MTV? If the price could come down to 25 it would be less of a choice.
Click to expand...
Click to collapse
Rep for MTV!? LOL! No bro, just trying to help out, thanks though.
LoopDoGG79 said:
Rep for MTV!? LOL! No bro, just trying to help out, thanks though.
Click to expand...
Click to collapse
Ok.
Hoping someone else can shed some more light onto this. Google and XDA haven't turned up much, but maybe there is a hidden thread that wasn't indexed appropriately. Here's to hoping I can get some help, and that this one will be.
http://www.wirelesspartsinc.com/samsungt959a687i9000epici897chargingport-6.aspx
Do those pins indicate the need for soldering?
I'm trying to figure this out myself.
I'm starting to think it does, but I can't seem to make any progress with my soldering iron. I don't know if it's a week iron, or im hitting the wrong spots.
OP- have you any progress?
Any progress?
Wondering if the OP got his port swapped out. If so, did it help?
I have the same problem. Mine wouldn't even charge at first though. I re flowed the solder on the port connections. After that it will charge but not connect to PC.
I'm thinking there may be a bad connection inside the port itself.
Anyone else had this problem?
Thanks
Related
im trying to repair a friend's incredible of mine and he said that ever since he replaced his cracked screen the power button hasn't been able to turn on the phone. So what i did is try to open the phone up myself and see if he is missing any parts from the mobo. If you guys have any pictures of the mobo of this phone it would help me identify what could be wrong.
bboyzala said:
im trying to repair a friend's incredible of mine and he said that ever since he replaced his cracked screen the power button hasn't been able to turn on the phone. So what i did is try to open the phone up myself and see if he is missing any parts from the mobo. If you guys have any pictures of the mobo of this phone it would help me identify what could be wrong.
Click to expand...
Click to collapse
You're best bet it to try to find copies of the FCC approval teardown. Often, but not always, they're floating around out there.
loonatik78 said:
You're best bet it to try to find copies of the FCC approval teardown. Often, but not always, they're floating around out there.
Click to expand...
Click to collapse
alright thanks and i actually did figure out the problem. There's a small part missing from the power button that keeps the phone from turning on. I was able to use a small object to poke it and it works. but i will need those fcc approval teardown pics. so thanks for the suggestion
bboyzala said:
alright thanks and i actually did figure out the problem. There's a small part missing from the power button that keeps the phone from turning on. I was able to use a small object to poke it and it works. but i will need those fcc approval teardown pics. so thanks for the suggestion
Click to expand...
Click to collapse
There's a guy not too long ago that went through and posted a complete replacement procedure for replacing that switch... lemme see if I can find it real quick.
ok... found it. http://forum.xda-developers.com/showthread.php?t=1222056
loonatik78 said:
There's a guy not too long ago that went through and posted a complete replacement procedure for replacing that switch... lemme see if I can find it real quick.
ok... found it. http://forum.xda-developers.com/showthread.php?t=1222056
Click to expand...
Click to collapse
awesome you've been great help thanks again!
if you need any help with the repair process, feel free to pm me.
My charging port is fried after attempting to make an at home Y cable to charge and have USB OTG. I see the ports on ebay for just a few dollars, and would love to switch it out, but I dont want to break anything.
http://www.ebay.com/itm/Samsung-T95...083?pt=LH_DefaultDomain_0&hash=item1e6ea68a8b
So, how the hell does that thing connect to the motherboard? Is soldering involved at all?
muyoso said:
So, how the hell does that thing connect to the motherboard? Is soldering involved at all?
Click to expand...
Click to collapse
i strongly suspect some soldering is involved. there is a video thread here about about taken the epic apart i know it says for screen but it should get you in the right direction.
http://forum.xda-developers.com/showthread.php?t=1569701
tazfanatic said:
i strongly suspect some soldering is involved. there is a video thread here about about taken the epic apart i know it says for screen but it should get you in the right direction.
http://forum.xda-developers.com/showthread.php?t=1569701
Click to expand...
Click to collapse
Yea, that was my fear. I took the epic apart about half an hour ago and was staring at it trying to see how it might be removed, but didn't want to completely ruin it by guessing. Been searching far and wide to see if anyone has done it on their phone with little success.
sounds like the seller would do it for you for an additional $30 dollars? Just gotta ask yourself, Is it worth it or are you willing to take that chance?
Maybe you can just ask the seller for directions on how to replace it, I'm sure he'd be helpful.
just my .02's
There is an elite developer named adam who can definately help u with this, just search for any of his threads and ask him. He is the one who created the unbrickable mod
Sent from my SPH-D700 using xda premium
Bro you should have asked earthbound he has supplies dedicated for making these usb otg cables.
Sent From My Sprint Galaxy Nexus
My phone just doesn't charge anymore.. I've googled and googled. I found one page where a guy said to push up on the tongue of the port to get it centered, but that didnt help at all. I've tried multiple cords with no luck. So I have two questions. What is better to go to for help. My verizon store? Or talk to them on the phone? And if i do, would i need to return to stock? No wait, 3.. if i do need to return to stock, how would i do that with a dead phone? I posted a question on rootz aswell with no solutions yet, maybe y'all will have some ideas. Thanks ahead!
-Justin
Had the same problem recently. It's a hardware issue, the only way to fix is to change the board inside the phone than contains the USB port.
And there is unfortunately no way of re-locking the bootloader, since your phone won't get a connection to a computer due to the dead port.
I looked around in an local Android forum and found someone who could fix my phone for a very fair price. The USB board is not expensive, you can get one on ebay for about 10 dollars
Hop this helps.
flx-grafix said:
Had the same problem recently. It's a hardware issue, the only way to fix is to change the board inside the phone than contains the USB port.
And there is unfortunately no way of re-locking the bootloader, since your phone won't get a connection to a computer due to the dead port.
I looked around in an local Android forum and found someone who could fix my phone for a very fair price. The USB board is not expensive, you can get one on ebay for about 10 dollars
Hop this helps.
Click to expand...
Click to collapse
Thanks for the response, Im chatting with samsung support right now. Do you have the link of the repair guy?
I hardbricked my S3. I messed up, I know. It was my fault that I didn't notice that the Slimbean was only for the international version. I have been looking online for a solution, but all I'm seeing is that I have to get a new phone. I cannot access Recovery or Download mode with or without the battery in while or while not plugged into the computer. Though, while the battery and SD are out, the charging/notification light will light up when plugged into the computer for about one minute, but that's it. Is there anyway to turn it into Sprint for a new one? It's been under a month. So...any advice?
Have you looked into this http://forum.xda-developers.com/showthread.php?t=1727171
Where did you find the rom that you flashed?
Wikd said:
Have you looked into this http://forum.xda-developers.com/showthread.php?t=1727171
Where did you find the rom that you flashed?
Click to expand...
Click to collapse
Looked at it, but I can't get my phone to go into Download mode, like I said. Whenever I plug it into the computer, it does nothing unless I have the battery out.
I got the rom from here.
http://slimroms.net/index.php/112-supported-device-list-cat/181
Methos013 said:
Looked at it, but I can't get my phone to go into Download mode, like I said. Whenever I plug it into the computer, it does nothing unless I have the battery out.
I got the rom from here.
http://slimroms.net/index.php/112-supported-device-list-cat/181
Click to expand...
Click to collapse
ahh, I'm not too familiar with Samsung or bricks, just trying to help, im sure this is stressful for you. I read some of the post I linked above and it says a USB jib might work. Here's a link to make one if you want to try http://forum.xda-developers.com/showthread.php?t=1331782
Check your pm and good luck.
Wikd said:
ahh, I'm not too familiar with Samsung or bricks, just trying to help, im sure this is stressful for you. I read some of the post I linked above and it says a USB jib might work. Here's a link to make one if you want to try http://forum.xda-developers.com/showthread.php?t=1331782
Check your pm and good luck.
Click to expand...
Click to collapse
I don't have a sodering tool. With it being the holiday season, ordering online for a premade one will take longer than I can go without a phone.
dude thats a very simple soldering job. you can get a soldering iron for like 5 bucks at radioshack, with solder. all those parts can be bought there, and the wire you can just rip a phone cord out of the wall lol
ou2mame said:
dude thats a very simple soldering job. you can get a soldering iron for like 5 bucks at radioshack, with solder. all those parts can be bought there, and the wire you can just rip a phone cord out of the wall lol
Click to expand...
Click to collapse
Personally I recommend the search button. That usually helps. Its a paperweight and a jig is useless. Go to sprint and play stupid. They'll replace it
billard412 said:
Personally I recommend the search button. That usually helps. Its a paperweight and a jig is useless. Go to sprint and play stupid. They'll replace it
Click to expand...
Click to collapse
Couldn't of said it better.
billard412 said:
Personally I recommend the search button. That usually helps. Its a paperweight and a jig is useless. Go to sprint and play stupid. They'll replace it
Click to expand...
Click to collapse
Can I go to an authorized Sprint retailer/satellite store or an official Sprint store? Just gonna say it died and won't take a charge anymore.
billard412 said:
Personally I recommend the search button. That usually helps. Its a paperweight and a jig is useless. Go to sprint and play stupid. They'll replace it
Click to expand...
Click to collapse
did you mean to quote me? i was just commenting on him saying he didn't have a soldering gun... i'm not saying if it will work or not, but if he did want to try it, it's a fairly simple object to make, with very simple and cheap tools. i don't have to search to know that it's just a few resistors and a male micro usb plug, maybe 15 bucks for everything including the soldering iron.
if you have insurance you can go to a sprint repair store and get it replaced for free... it usually takes about 2 days for your replacement to come in..
http://storelocator.sprint.com/locator/
xTmDarren said:
if you have insurance you can go to a sprint repair store and get it replaced for free... it usually takes about 2 days for your replacement to come in..
http://storelocator.sprint.com/locator/
Click to expand...
Click to collapse
That is what I'm planning on doing tomorrow.
UPDATE: I did get it replaced yesterday. Told me it'd take thirty minutes, went out and got lunch. When I came back, they said they have no clue what happened to it to cause it to fry like it did, so they swapped it out for a new model. I'll root tomorrow when I have more time. I'll stick to what I can find here on XDA now on. Any recommendations for a good AOKP ROM?
Methos013 said:
UPDATE: I did get it replaced yesterday. Told me it'd take thirty minutes, went out and got lunch. When I came back, they said they have no clue what happened to it to cause it to fry like it did, so they swapped it out for a new model. I'll root tomorrow when I have more time. I'll stick to what I can find here on XDA now on. Any recommendations for a good AOKP ROM?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1798981
The AOKP I am using for Sprint Galaxy S3.
Very nice. Works well. Love the emoji and custom ability.
--------------------------------------------------------
Sent From My Rooted, S-OFF'd Blackberry Curve using the iOS XDA Application for Android.
Smh...
Sent from my SPH-L710 using XDA Premium HD app
DirtyShroomz said:
Smh...
Sent from my SPH-L710 using XDA Premium HD app
Click to expand...
Click to collapse
I know, foolish. Coming from the OG Evo, I didn't have to worry about seeing if it was American or International and which carrier it was for. I'm being more careful this time.
Call samsung say the phone died and won't come on. They will replace it as long as there is no physical damage. One year manufacture warranty is still valid use it f sprint don't waste your time. Samsung is fast at sending you a new or refurbished phone. I had several phones replaced. They send you a new phone or used phone and a box to send your old one. They don't check for rooting or nothing they just install new software on the phone and send it out to the next person. Now ups is my issue with the entire process, they Just leave it on your door step even if your not home it happened twice thank god no one stole my phone, I thought we were supposed to sign for it but I guess not.
Sent from my Nexus 7 using XDA Premium App
Methos013 said:
UPDATE: I did get it replaced yesterday. Told me it'd take thirty minutes, went out and got lunch. When I came back, they said they have no clue what happened to it to cause it to fry like it did, so they swapped it out for a new model. I'll root tomorrow when I have more time. I'll stick to what I can find here on XDA now on. Any recommendations for a good AOKP ROM?
Click to expand...
Click to collapse
Happened with my wife's phone as well. Full charged then it just shut down. Tried everything and nothing. Sprint told me it was fried.
Sent from my Samsung (Apples are meant to be eaten) Galaxy S3
Methos013 said:
UPDATE: I did get it replaced yesterday. Told me it'd take thirty minutes, went out and got lunch. When I came back, they said they have no clue what happened to it to cause it to fry like it did, so they swapped it out for a new model. I'll root tomorrow when I have more time. I'll stick to what I can find here on XDA now on. Any recommendations for a good AOKP ROM?
Click to expand...
Click to collapse
well damn the sprint places around here told me I had to wait to get another one
Glad you were able to get a replacement. Now use protection when you flash
Haha
Sent from my SPH-L710 using Tapatalk 2
My phone started acting up about 2 weeks ago. It would not charge all the time and my PC had a hard time staying connected to it. I ordered a new USB port from eBay and installed it. I am getting a weaker than normal signal, but what is really weird is that when I remove the sim card, I still have 1 bar and sometimes 2 bars of signal. I have tried rebooting and pulling the battery. Is there a way to reset my signal meter or something? Maybe I could reflash my ROM? I don't know, does anyone have any suggestions?
Oh and this is the second USB port that I have received from an eBay seller. I sent the first one back for this reason but the new one is acting the same way.
Sent from my GT-N7100 using xda premium
lyall29 said:
My phone started acting up about 2 weeks ago. It would not charge all the time and my PC had a hard time staying connected to it. I ordered a new USB port from eBay and installed it. I am getting a weaker than normal signal, but what is really weird is that when I remove the sim card, I still have 1 bar and sometimes 2 bars of signal. I have tried rebooting and pulling the battery. Is there a way to reset my signal meter or something? Maybe I could reflash my ROM? I don't know, does anyone have any suggestions?
Oh and this is the second USB port that I have received from an eBay seller. I sent the first one back for this reason but the new one is acting the same way.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Chk settings/more settings/mobile network/network mode -gsm only see if there is any diffrence now
Be sure while fixing the usb that the network wire attached to it fine as that may be the culprit
shhbz said:
Chk settings/more settings/mobile network/network mode -gsm only see if there is any diffrence now
Be sure while fixing the usb that the network wire attached to it fine as that may be the culprit
Click to expand...
Click to collapse
Thanks for the suggestions but nothing helped. I'm in my house now where I should get hspa+ and I only get edge. I guess I might have to try another source for the USB port.
Sent from my GT-N7100 using xda premium
lyall29 said:
Thanks for the suggestions but nothing helped. I'm in my house now where I should get hspa+ and I only get edge. I guess I might have to try another source for the USB port.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Well as u already replaced the usb again it must not be faulty as I had problem wth the usb 2 and when the servc guy changed it in frnt of me and after fixing it back I got no network as the wire connected to it which is on the right hand corner went kaput as a little force applied by the servc guy resulted in no netwrk and it was fixed replacing the signal reception wire .I hope u get which wire I m talking abt its the thin wire to right of the pcb board dat is attached to the usb port by just pressing it to the usb port on the lower right.
Yeah I know the wire your talking about. I can plug my original USB port back in and it gets a good signal but as soon as I plug the new board in the signal goes to crap again. If I can't get it to work I may just use it as a small tablet and use my nexus 4 as my main phone. Thanks for the help.
Yep, I just put my old USB port back in and got H+ right away. I re-installed the new one, and now I get no service.
Sent from my Nexus 4 using xda premium
lyall29 said:
My phone started acting up about 2 weeks ago. It would not charge all the time and my PC had a hard time staying connected to it. I ordered a new USB port from eBay and installed it. I am getting a weaker than normal signal, but what is really weird is that when I remove the sim card, I still have 1 bar and sometimes 2 bars of signal. I have tried rebooting and pulling the battery. Is there a way to reset my signal meter or something? Maybe I could reflash my ROM? I don't know, does anyone have any suggestions?
Oh and this is the second USB port that I have received from an eBay seller. I sent the first one back for this reason but the new one is acting the same way.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
A few pieces of information:
- USB has nothing, repeat _nothing_, to do with radio reception levels and adding a "USB port" (I assume that means a additional USB adaptor for your laptop) is not going to change that.
- If your cell phone does not charge properly, or not at all, the very first, and cheapest, thing to check is your USB cable (I had that happen to my daughter and her Blackberry), so try another cable. A short one preferably as I have a fairly long (1.9m or 6'3) one on my desk that is next to useless
- the second thing to check is to plug other USB devices (USB stick, camera, other phone, hard drive, camcorder, whatever...) in that suspected faulty USB port to see if they behave properly or not. If they do, then the port is most probably not at fault.
- If the phone is set to only use GSM, or you have selected manually a GSM cell to attach to, the phone will stay there and monitor the GSM network. You could have 5 bars H+ signal in the home and not know about it (at least all the phones I've used over the years behaved that way).
- You're supposed to be able to make emergency calls with a bare phone, so I would hope you still get reception when the SIM is out.
Finally, and seeing your other posts where you signal that changing "USB ports" changes the radio behaviour of your phone (which I have a very hard time believing), I have to assume there is a communication problem there...
Could you describe a little better, maybe with pictures, what it is you are really trying to achieve, please? Does the phone work fine when _not_ attached to a "USB port"? What do _you_ call a USB port and why do you need the phone to work while attached to it?
If indeed plugging the phone in some USB ports impacts its radio behaviour, then I would assume the phone is FUBAR and should be returned and replaced...
HTH,
François
lyall29 said:
Yeah I know the wire your talking about. I can plug my original USB port back in and it gets a good signal but as soon as I plug the new board in the signal goes to crap again. If I can't get it to work I may just use it as a small tablet and use my nexus 4 as my main phone. Thanks for the help.
Yep, I just put my old USB port back in and got H+ right away. I re-installed the new one, and now I get no service.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Well in this case as mentined above that the usb has nthing to do wth the signal but the wire that is connected to the usb has so try to get org samsung note2 usb port as I even found that few usb slot that I being sold in ebay are not exact the same as original so try to get an authentic usb port as definately the wire which is attached to your new usb port is hvng prob catching signal so it seems that the port is nt wrking fine try to get one from a geniune seller from ebay whose feedback is positive related to the usb he is selling and 1 more thing do u have an international version I.e. n7100 or n7105 or other specific carrier be sure on what you are being rather bfr purchasing confirm with the seller the exact model code written on the usb port.
shhbz said:
Well in this case as mentined above that the usb has nthing to do wth the signal but the wire that is connected to the usb has so try to get org samsung note2 usb port as I even found that few usb slot that I being sold in ebay are not exact the same as original so try to get an authentic usb port as definately the wire which is attached to your new usb port is hvng prob catching signal so it seems that the port is nt wrking fine try to get one from a geniune seller from ebay whose feedback is positive related to the usb he is selling and 1 more thing do u have an international version I.e. n7100 or n7105 or other specific carrier be sure on what you are being rather bfr purchasing confirm with the seller the exact model code written on the usb port.
Click to expand...
Click to collapse
Sorry to interrupt but what is a "org samsung note2 usb port"?
Could you post a link, maybe?
frankieGom said:
Sorry to interrupt but what is a "org samsung note2 usb port"?
Could you post a link, maybe?
Click to expand...
Click to collapse
Well on my phn now so its difficult to search fr the usb slot or port or whatever u call it exactly but I better to confirm the seller wth the exact model code printed on the usb slot
frankieGom said:
Sorry to interrupt but what is a "org samsung note2 usb port"?
Could you post a link, maybe?
Click to expand...
Click to collapse
We are talking about this, http://www.witrigs.com/replacement-parts-charging-port-usb-flex-cable-for-samsung-galaxy-note-2
I have a video that I recorded this morning that I I am uploading to YouTube. I will post a link as soon as it is done uploading so that you can see how the antenna plugs in to the USB port and that it does make a difference in my signal and data connection.
There was no need for all the sh*t talk in your first post. If you don't know what you are talking about then you shouldn't make posts before researching the topic.
Sent from my Nexus 4 using xda premium
lyall29 said:
We are talking about this, http://www.witrigs.com/replacement-parts-charging-port-usb-flex-cable-for-samsung-galaxy-note-2
I have a video that I recorded this morning that I I am uploading to YouTube. I will post a link as soon as it is done uploading so that you can see how the antenna plugs in to the USB port and that it does make a difference in my signal and data connection.
There was no need for all the sh*t talk in your first post. If you don't know what you are talking about then you shouldn't make posts before researching the topic.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Back off, man!
Nowhere does it say in the OP you are trying to replace the USB port INSIDE the freaking phone, and I made it abundantly clear that I wasn't sure what you were talking about and assumed laptop USB port. I even guessed I was misunderstanding you and asked for the picture to clarify.
Based on that, I tried to offer advice based on my own experiences with cellular phones both at home and the office. And to bash me like that when it's obvious I'm not a native english speaker is a bit disingenious.
Anyway, however you want to write it, the antenna doesn't plug into the USB port, as you say. Again. The part you bought may accomodate for the connection of both the motherboard and the antennas, it does not mean antenna and USB are interconnected. They are not. The only thing I'll concede is that the amplifier may derive power directly from the power lead in the connector (and why it would do that when it gets it from the battery already?)
that's it for me, feel free to ignore me in the future I won't miss it.
frankieGom said:
Back off, man!
Nowhere does it say in the OP you are trying to replace the USB port INSIDE the freaking phone, and I made it abundantly clear that I wasn't sure what you were talking about and assumed laptop USB port. I even guessed I was misunderstanding you and asked for the picture to clarify.
Based on that, I tried to offer advice based on my own experiences with cellular phones both at home and the office. And to bash me like that when it's obvious I'm not a native english speaker is a bit disingenious.
Anyway, however you want to write it, the antenna doesn't plug into the USB port, as you say. Again. The part you bought may accomodate for the connection of both the motherboard and the antennas, it does not mean antenna and USB are interconnected. They are not. The only thing I'll concede is that the amplifier may derive power directly from the power lead in the connector (and why it would do that when it gets it from the battery already?)
that's it for me, feel free to ignore me in the future I won't miss it.
Click to expand...
Click to collapse
Were you dropped on your head when you were born? Or did you eat lead paint chips? English not being your native language has nothing to do with this. I understood you fine. Its just you don't know what your talking about. The antenna does plug directly into the USB port flex cable.
Sent from my GT-N7100 using xda premium
Sent from my GT-N7100 using xda premium
lyall29 said:
Were you dropped on your head when you were born? Or did you eat lead paint chips? English not being your native language has nothing to do with this. I understood you fine. Its just you don't know what your talking about. The antenna does plug directly into the USB port flex cable.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Curiosity killed the cat
Flex cable are the operative words there. But you're right in a way, I didn't know what you were talking about until I saw this picture.
Also, I do think miscommunication can clearly be attributed to country differences. You were not being very clear and I missed your point entirely. At least I thought about the possibility,you should give me that...
Peace?
---------- Post added at 04:12 PM ---------- Previous post was at 04:10 PM ----------
lyall29 said:
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Yes, that's the same picture I found. That antenna connector links to the radio on the motherboard.
frankieGom said:
Curiosity killed the cat
Flex cable are the operative words there. But you're right in a way, I didn't know what you were talking about until I saw this picture.
Also, I do think miscommunication can clearly be attributed to country differences. You were not being very clear and I missed your point entirely. At least I thought about the possibility,you should give me that...
Peace?
Click to expand...
Click to collapse
Yeah I say we call peace. I don't like arguing at all. My video is almost done uploading so I will post a link in the next few minutes if you want to look at it.
Sent from my GT-N7100 using xda premium
Here is my video.
https://www.youtube.com/watch?v=DCDVTRlIWkc&feature=youtube_gdata_player
Sent from my Nexus 4 using xda premium
lyall29 said:
Yeah I say we call peace. I don't like arguing at all. My video is almost done uploading so I will post a link in the next few minutes if you want to look at it.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Me neither, and I get fed up witnessing people getting dragged into meaningless disputes.
About your problem, now that I can visualize it...
I have a Note 2 LTE whose radio stopped working correctly last january, as well as a co-worker's S3 (lab phones). We thought it was a bad manipulation in the phone service menus originally (we had to apply the same to both for work reasons), but that has been ruled out since.
The real reason for the mess up, it seems, the only one left to us at least, is that we were working on a bench with wired radio and had to plug radio leads into the connectors (there are two on the LTE model) to get coverage. Must have broken or changed something within the phone to explain the loss of sentitivity...
Not sure that's going to help, but you may have more than just the USB port flex cable broken on that phone...
I take that back. I now have a clear view with the video and context. I'd say your issue is with your spares. You'll probably have to swap them until you find a good enough one.
good luck
Thanks for the info. I would definitely assume that it was something other than the USB port flex cable if I did not get good signal and data connection with the old USB flex. I've seen people on the galaxy s2 forums that have the same problem as me and have actually cut the original part in half and the new part in half, taped them together, and this worked! I haven't tried that yet. The thing that threw me off is the signal with no sim card. In the USA when you take your sim card out the, the signal meter goes blank, on every phone I've had at least. I know I can make an emergency call to 911 but the signal meter is always blank. This is also true on my nexus 4 when I remove the sim card. Maybe I can find a part with the same rev. # that will work for me. Thanks to everyone for your input.
Sent from my Nexus 4 using xda premium
Thanks for watching my video Frank. That was my first video to make for YouTube. I was starting to think nobody would watch it.
Sent from my Nexus 4 using xda premium
lyall29 said:
Thanks for watching my video Frank. That was my first video to make for YouTube. I was starting to think nobody would watch it.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Well whatever u r doing is completely fine so just chk the model of the flex usb as it seems that is the culprit to your prob as if in org is wrking fine thn u nead to deal wth he usb flex find a genuine dealer in ebay or rather take it to servc center if u hv ny n pay thm to fix the usb flex