[Q] R800x won't boot or show splash screen after unlocking - Xperia Play Q&A, Help & Troubleshooting

So maybe I'm not as good at this as I thought, but I unlocked my bootloader through the sony website a few days ago. The phone was working fine with 2.3.4 (from verizon). I tried to revert back to 2.3.3 with the (verizon) .ftf file. After flashing it with flashtool, my phone won't boot at all. There is no splash screen and holding down the power button makes it vibrate every 2 seconds. I am still able to reflash the 2.3.3 ftf, but after it completes its the same story. And of course using seus or PC companion says I have modified software and tells me to kick rocks. Perhaps someone smarter than me can help?

Well I'm confused already. The R800x bootloader cannot be unlocked via Sony's method.

Correct. And my play only has done the vibrete every two seconds because it over heated....so I doubt you have unlocked your bootloader and so after flashing 2.3.3 you bricked probably cuz the file you have is mislabled
Sent from my GBTweaked V7.1 R800x using Tapatalk 2

I should have been more specific. I unlocked the bootloader with flashtool's plugin. I acquired the unlock code from the sony website.
I still have the ability to connect in flash mode, but I guess an overheat is possible...
Again, my knowledge is probably more limited than it should be, but is there a way for me to re-flash the coding the bootloader contained?

drdarkwing said:
I should have been more specific. I unlocked the bootloader with flashtool's plugin. I acquired the unlock code from the sony website.
I still have the ability to connect in flash mode, but I guess an overheat is possible...
Again, my knowledge is probably more limited than it should be, but is there a way for me to re-flash the coding the bootloader contained?
Click to expand...
Click to collapse
You damaged its trim area repair that using a patch.....
Sent from my R800i using xda premium
---------- Post added at 04:46 PM ---------- Previous post was at 04:43 PM ----------
http://forum.xda-developers.com/showthread.php?t=1126354 if it doesn't help relock ita bl then flash ftf it'll work
Sent from my R800i using xda premium

Thanks all around! the download link was broken for the first option, so I ended up relocking it and flashing the firmware again. unbricked and back to 2.3.3!
Thanks again guys!
Onward and Upward

Same Issue. Please help.
I now seem to be in the same situation. I unlocked my R800x via the official Sony method about two weeks ago and all was well. I've flashed custom kernels and ROMs and flashed the 2.3.3 ftf countless times. Today I decided to flash the ftf and run stock for a while as my battery life has become crap. It flashed no problem just as it always does, I activated the phone then stuck it in my pocket and went on with life. An hour or so later I take it out and push Home to wake it, but nothing happens. My first reaction is to pull the battery then turn it back on since that usually does the trick, but it vibrates as it normally does but nothing happens. So I flash the ftf again and still the same, I press Power and it vibrates but nothing, the screen just remains black. Since then I've trolled the forums and tried everything I could think of and everything that anyone suggested, but nothing has worked. I haven't tried relocking the bootloader, then flashing the ftf again because I can't seem to find any instructions on how to do it. If anyone can point me in the right direction, I would be more than willing to try it. Any help at all would be greatly appreciated as I am totally lost at this point.I never imagined there would be a day that one of my precious androids wouldn't emerge from a stock firmware flash good as new.
EDIT: I flashed the Xperia BL Relock ftf in this tread then flashed the Verizon 2.3.3 ftf again and it worked! My PLAY has risen from the ashes once again.

Morbyd.X said:
I now seem to be in the same situation. I unlocked my R800x via the official Sony method about two weeks ago and all was well. I've flashed custom kernels and ROMs and flashed the 2.3.3 ftf countless times. Today I decided to flash the ftf and run stock for a while as my battery life has become crap. It flashed no problem just as it always does, I activated the phone then stuck it in my pocket and went on with life. An hour or so later I take it out and push Home to wake it, but nothing happens. My first reaction is to pull the battery then turn it back on since that usually does the trick, but it vibrates as it normally does but nothing happens. So I flash the ftf again and still the same, I press Power and it vibrates but nothing, the screen just remains black. Since then I've trolled the forums and tried everything I could think of and everything that anyone suggested, but nothing has worked. I haven't tried relocking the bootloader, then flashing the ftf again because I can't seem to find any instructions on how to do it. If anyone can point me in the right direction, I would be more than willing to try it. Any help at all would be greatly appreciated as I am totally lost at this point.I never imagined there would be a day that one of my precious androids wouldn't emerge from a stock firmware flash good as new.
EDIT: I flashed the Xperia BL Relock ftf in this tread then flashed the Verizon 2.3.3 ftf again and it worked! My PLAY has risen from the ashes once again.
Click to expand...
Click to collapse
Buddy all that could've been fixed with a battery recalibration app. :silly:

Probably so, but wasn't that soo much more interesting? Lol.

Related

[Q] Xperia Arc not turning on anymore

I just received an OTA to my Xperia Arc. The update downloaded fine and it started the update OK. During the update (I had the open box icon an 4 dots on screen) the phone just shut down and now it doesn't turn on anymore... Nothing happens if I press power button (it doesn't matter how long) even after removing battery.
Is there anything I can do. Is my phone permanently bricked? I thought they test these OTAs before pushing them out?
Let me guess, your bootloader is unlocked?
If yes, go to the Android Development section and flash the unbrick thing for fota bricked devices.
Sent from my LT15i using XDA Premium App
Flo95, yes. My bootloader is unlocked. I thought the OTAs would still work.
Thank you very much for pointing me towards a solution. Well appreciated!
@Leafhill,
Unfortunately, if you do have your bootloader unlocked, doing an update OTA ends up bricking your phone.
Hello Flo95 i have exactly the same problem of Leafhill i was updating the xperia arc and the phone just shut down and now it doesn't turn on anymore, Nothing happens if I press power button even if i remove the battery. i have flashed around 7 times with other firmwares and still nothing, i read your answer but i don't know hot to use the flash of the Android Development, can you give me some advice plz? thks in advanced
Same problem here. But the bootloader is locked. So how to get it on now?
soulreaperak said:
Same problem here. But the bootloader is locked. So how to get it on now?
Click to expand...
Click to collapse
SEUS, Flashtool or the unbrick thread.
Sent Via LT15i - FXP46-CM7

Arc bricked

I executed the command 'fastboot erase boot' in fastboot when I was not supposed to, while trying to flash .62 FW. After that the phone is unable to startup, at some point the lockscreen would appear for a split second and the phone shuts down. I tried flash mode to the old FW .181 and 184. I also flashed DoomKernel though fastboot and flashed back to kernel from .181. Does someone know what I did wrong and how to fix the phone? Im all hopeless here
I can still go to CWM recovery after flashing doomkernel. I can also flash stock(?) kernel. I have tried back and forth what I mentioned.
I didnt mean to post this on development section, sorry o.o I had too many Xda tabs open from researching.
I've found that. Hopes it will helps
"Developers who are creating new images to try out very often can remove their boot and recovery images which will force the phone to enter bootloader mode every time you boot. To fix this, you would reflash the boot and recovery images back allowing the phone to boot normally."
http://android-dls.com/wiki/index.php?title=Fastboot
this is no brick, i've experienced this before, for easiest way use your ftf files using flashtool to recover it.
Dev thread
Sent from my MT15i using xda premium
Why don't you fastboot a kernel? Then see if it boots
Sent from my MT15i using xda premium
I have tried flashing .ftf (.181/.184) file with flashtool and tried fastboot (doomkernel and kernel from .181).
Right now I have it flashed to .181 with Flashtool and the phone turns on and turns off right when it gets to lockscreen.
Have you tried wotan?
Install the windows software and follow the guidance on your screen.
Does it show 0% battery?
You were on 2.3.4 and flashed 2.3.2 which will cause the 0% battery issue and then the phone turn off by itself.
Sent from my iPad 2 using Tapatalk
Yes the battery shows 0% Ill look into the 0% workaround.
Now Im not sure what Im supposed to do... Phone stays on when charging (not through the pc). How am I supposed to fix 0% battery when Im on .181 or .184? Old FWs.
The only way to get the phone going is to flash back to .184 and apply [ARC/ARC S]DooMKernel for STOCK ROM patched to fix 0% battery. After that when I try to flash prerooted .img 4.0.2.A.0.62 Generic Global (MAA World) it gets stuck on SE logo.
Also the Doomkernel logo only shows up on first reboot right after fastbooting it and next time I turn it on it shows Sony Ericsson.
ST4YSTR0NG said:
I have tried flashing .ftf (.181/.184) file with flashtool and tried fastboot (doomkernel and kernel from .181).
Right now I have it flashed to .181 with Flashtool and the phone turns on and turns off right when it gets to lockscreen.
Click to expand...
Click to collapse
Downgrading your firmware to .181 corrupted the fuel gauge. Now you have the 0% battery issue.
Here's all you need:
http://forum.xda-developers.com/showthread.php?t=1312398
Sent from my iPad 2 using Tapatalk
Thanks guys, Ill try Bazoocaze's guide thoroughly. And Im gonna try it staying on .181 or get the .283.
And then what should I do after the battery indicator has fixed? Will it be ok to flash .62 directly from .181 or .283?
Edit: Forget what I said above, Im gonna try .62 first with Bazoocaze's .62 boot.img but Im wondering if that will work with prerooted .img 4.0.2.A.0.62 Generic Global (MAA World).
Ok thank you so much guys and sorry for my chaotic posts lol. I am now on .42 and recharging battery with FuelGaugeFix.
Is it now safe to follow the instructions from Arconium and boot Doomkernel?
Edit: The phone was running fine and I rebooted it and a big surprise it shows 0% battery and shuts down.
Edit: Oh my... I have such a never ending stupidity. All this time I have been using the command 'fastboot boot boot.img' for kernel. I just realized that its 'fastboot flash boot boot.img'
I apologize for bugging who I may have bugged.
Any ideas about beeing possible to have 0% battery problem if bootloader unlocked?? Cause I downgraded once and my arc didn't notice, it's alright. But I would be more careful in future regarding this.
@ST4YSTRONG do you have unlocked bootloader?
Locked Arcs ran into this problem, too.
Sent from my iPad 2 using Tapatalk
Flo95 said:
Locked Arcs ran into this problem, too.
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
I suppose you wanted to say UNlocked? Cause that locked has this problem is what I've read somewhere...damn, then I dunno why it happened to me last week that I downgraded from .62 to .58 Lucky of me!!
Thanks!
Very Arc ran into this problem from what I've read.
Looked or unlocked bootloader.
Glad I unlocked my bl before and could easily root 2.3.4 with DooMKernel instead of messing around with downgrading and Gingerbreak etc.
Sent from my iPad 2 using Tapatalk
xexijreil said:
Any ideas about beeing possible to have 0% battery problem if bootloader unlocked?? Cause I downgraded once and my arc didn't notice, it's alright. But I would be more careful in future regarding this.
@ST4YSTRONG do you have unlocked bootloader?
Click to expand...
Click to collapse
Yes I unlocked my bootloader recently when I was downgrading from 2.3.4 to 2.3.2 (I know thats stupid and gives u 0% battery problem) and that was necessary since here the more we download the more we pay. I had bootloop issue while trying to change framework.res.
I did get 0% battery problem before unlocking bl as well, unless Im mistaken and that didnt leave my Arc impaired.
Its when u downgrade to 2.3.2 or more, u get 0% battery problem.

[Q] My Arc is VERY unhappy ...

Hi all.
On Saturday night my Arc (debranded Rogers, locked BL, rooted with zergrush, running 2.3.4 on firmware .42) was running just fine. We were out at a friend's place and I was calling up photos, doing Web searches, no problem. Then yesterday when I turned the beast on it went into in a bootloop - SE logo, blank screen, SE logo, blank screen ...
I managed to boot into CWM to be able to turn it off, but that was as far as I got (and after a wasted afternoon trying to reflash I can't even get to CWM now).
PCC/SEUS are no help at all - after going through the 'Repair phone' process PCC says there's 'no software available for your phone yet'. I've tried reflashing generic f/ware with both Wotanserver and Flashtool 0.6.8.0; with Flashtool I get the same "Final data verification failed" error as reported recently here with an X10 after 99% complete. And this message from the bottom of the log makes me suspicious Flashtool wants me to change mode, which is just a little tricky when I can't start the phone:
INFO - For 2011 devices line, be sure you are not in MTP mode
Current status is the phone boots to the SE logo, then displays an image of an exclamation mark over a phone - one of the least informative images I've seen, unless it represents a tombstone, which seems very possible! - then dies again.
I've looked at a couple of other XDA threads about bricks; the most promising-sounding one was talking about unlocked bootloaders, though, so I didn't try to flash the file they were talking about.
I might feel slightly better if I'd done something - anything! - like an OTA update or whatever to cause this, but all I did was turn the thing off for the night, as I always do.
Please, somebody: help!!
Thanks, in great anticipation.
Didcha tr y reflashing rom or kernel? Also factory reset might help.
Sent from LT18i @ Xda Premium
Thanks, ArmorD.
Just ROM - I can't do anything with the kernel with a locked bootloader, can I?
I'd try a factory reset if I could get into CWM, but I can't. I tried the reset method from here, but the phone still just goes to the SE logo, then the 'tombstone'.
Open to pretty much anything at this stage!
Well, what you can do is i think re-flash it with Update service, it might work than.
Here is the link to update service since you wont find it in SE website.
http://www.mediafire.com/?mkk2w0os8ak1dzf
:S Nvm. You already have tried update service. didn't saw it when i read it first..
Bro, just reflash the system
I have just ended up with a boot loop on my arc.. I reflashed and it worked well!
-cheers
untouchable123 said:
... I reflashed and it worked well! ...
Click to expand...
Click to collapse
So did I, and it didn't! But thanks anyway.
Further news: trying to eliminate possible causes, I've had the SD card checked (by inserting it in another device). It's quite readable. I didn't really think this problem would have anything to do with the card, but it seemed worth trying.
Well, idk. Sorry bro! Try to flash stock firmware with flashtool! And it might work! Also bricked=phone is not turning on at all! Like u press the power button and nothing is happening. Cheer up man u finally gonna fix it. ;-)
Sent from my LT18i using XDA
i have encounter tha triangle with ! inside and a phone beside it, it happens when i tried flashing my phone using wotanserver,i want to root my phone and tried to downgrade to .42 taiwan ftf,but the file in wotanserver is maybe damage and did not finish flashing,then i got that "tombstone" icon.
what i did was flash it with uk tft .42,and it restored my arc s,after that i flash it again with .62 taiwan ftf since i live in taiwan, i dont know if this will work on your phone. or maybe you already tried doing it. i just want to share what i happen to encounter. hope you fix your phone.
Untouchable: thanks - I wish I shared your faith!
asderth8000: thanks also. I tried a different firmware version tonight (US generic; previously World; also tried Australian) but same result - Wotan dies with 'ERROR: File write failed' while writing userdata.s08. It feels like that's close to the end of the process, which suggests Wotan and Flashtool are both getting hung up at the same place. Screenshot of Wotan error atatched - hope it gives somebody some ideas.
I appreciate your help, people. Keep them thoughts coming!
lol bro stop using Wotan use Flashtool!!!!!!! lol my faith is beyond the limit. I have bricked & ubricked my cell a couple of times;-)
Sent from my LT18i using XDA
I got that same error using .42 Taiwan ftf, maybe try UK, it works fine with me although I don't live in UK.
I remember mine was on userdata.07 when an error occured,I thought at first that it was my connection then I tried doing it again and it failed, then I tried the UK version and it goes well. Save your apn settings too.
Anicane said:
Well, what you can do is i think re-flash it with Update service, it might work than.
Here is the link to update service since you wont find it in SE website.
http://www.mediafire.com/?mkk2w0os8ak1dzf
:S Nvm. You already have tried update service. didn't saw it when i read it first..
Click to expand...
Click to collapse
Update service is available again for some time!
http://www.sonymobile.com/gb/tools/update-service/
---------- Post added at 05:15 PM ---------- Previous post was at 05:13 PM ----------
This package has saved me before, even for things it isn't meant for. Worth trying, won't do any more damage I think.
http://forum.xda-developers.com/showpost.php?p=14774499&postcount=1
It's BAAAACK!
First, and most importantly: I have a phone again.
The eventual answer was this thread, suggested by sdk16420. I hadn't tried it before because it was talking about unlocked bootloaders, but I fired it up this morning and ... guess what? I've spent most of the day restoring things, but I'm pretty much there - even rooted again (lost that along the way). The phone says there's an OTA update for .62 ready, but that failed and PCC doesn't believe it exists. Ah well, there's always something ...
Secondly: huge thanks to the XDA community for your support and suggestions. You guys are OK!
Loosely said:
First, and most importantly: I have a phone again.
The eventual answer was this thread, suggested by sdk16420. I hadn't tried it before because it was talking about unlocked bootloaders, but I fired it up this morning and ... guess what? I've spent most of the day restoring things, but I'm pretty much there - even rooted again (lost that along the way). The phone says there's an OTA update for .62 ready, but that failed and PCC doesn't believe it exists. Ah well, there's always something ...
Secondly: huge thanks to the XDA community for your support and suggestions. You guys are OK!
Click to expand...
Click to collapse
No prob bro;-) ask anything u want and we will try to help;-)
Sent from my LT18i using XDA
PLEASE HELP - Potentially bricked LT18i
slightly different similar problem:
LT18i, 2.3.4 build .62.. or it was!
Wares used: SE Bootloader Lock/Unlocker, Flashtool
Flashtool really should come with a lot more documentation and user guide: I'm a software person, but C++ is my confortable realm!
Managed to flash CWM on there and got it stuck in a bootloop of CWM (trying to install RootXperia.zip): tried many other images, the best I can get is a Sony Ericsson Logo looping.. I guess my SD card is okay.
Can't find an up to date, stock, 2.3.4 build .62 to repair my phone..
Help! A Walkthrough of my problem helps me rinse my degree and this equates to thanks and donations, I am a desperate man right now!
Please hassle me for info, help me help you help me!!
My Arc is Crying too!
PS that r800i ROM didn't work for me!
WHAT I NEED FROM YOU LOVELY PEOPLES:
-A link to the stock ROM or LT18i .62
-noobproof couple of steps to explain flashtool 0.6.8.0
-noobproof steps of how to flash the stock ROM/Kernel back in place
Hope you can help me.. my first flash went entirely squiffy!
Thanks in advance!
Omg plz ignore my noob self, except massive props to doomlord.
Sent from my LT18i using XDA

[Q] Another bricked play

i have been trying to fix my play for two days now and have tried everything i can think of
i have a R800i, on 62. firmware, i have tried flashing the stock FTF firmware, tried flashing the "TA brick fix uppdate" tried using wotan client too but no joy
i can still use flashtool and can still enter fastboot but when i turn on my play it just vibrates for a second and then nothing
Get Sony Ericsson Update Service and use that to repair the software; it always works for me no matter what - it can take around 20 retries though -_-... Try removing the battery for 30 seconds after around 10 retries - I have no idea why this helps but it has in the past...
im getting "phone contains modified software that cannot be updated"
is this normal or am i still fuked?
any other suggestions would be greatly appreciated, as it is right now i cant even return it to sony because they will no straight away that i modified the firmware
silvacrest said:
any other suggestions would be greatly appreciated, as it is right now i cant even return it to sony because they will no straight away that i modified the firmware
Click to expand...
Click to collapse
Flash it back to stock using Wotanserver then try SEUS.
Sent from my R800x using Tapatalk
paxChristos said:
Flash it back to stock using Wotanserver then try SEUS.
Sent from my R800x using Tapatalk
Click to expand...
Click to collapse
something is not right, i installed stock using wotanclient, then i tried using SEUS but i still get "the phone contains modified firmware"
im getting no errors using flashtool or wotanclient but apparently the firmware is not being flashed
i had the same problem when i bricked my play all i did was flash generic stock rom on it and took out the sd card and have no problemhttp://www.xperiagamer.com/Stock-Roms/233-se-stock-firmware-for-root.html
sportstj11 said:
i had the same problem when i bricked my play all i did was flash generic stock rom on it and took out the sd card and have no problemhttp://www.xperiagamer.com/Stock-Roms/233-se-stock-firmware-for-root.html
Click to expand...
Click to collapse
tried it, still didnt work, is there a recovery method using fastboot that i could try? im unsure whether flashtool is actually working....
i managed to relock the bootloader which meant SEUS finally allowed me to install the firmware which was successful but the screen is still completely black, tried flashtool and wotanclient afterwards, both installed successfully but the screen is still black, i think the phone is working but the screen it self has died somehow
i was wondering, since the bootloader is relocked and the official stock firmware has been installed, should sony accept the faulty play without issue?
its possible if u run the update service and if it says phone is up to date one would think so ... i would ask a question and see what others say im still new to this site but yet i have learned alot make sure u update ur flashing tool too and make sure its properly flashed and when flashing is completed it should say flash complete.

[Q] bricked xperia play r800i helppppppp!!!!

hi there i am using xperia play r800i...first i flashed gin2jellybean rom and it was fine....after 3weeks i tried to flash my stock rom but my phone is not responding anymore after this.....it shows only the logo and that's it...my pc don't recognize my phone cuz only is rebooting automatically,my led light doesn't show neither green ,red or blue colour....i am new in android world and i'm afraid that my phone is dead (( please helppp!!!!if u know how to fix this problem.....PS:sorry for my bad english
Is your bootloader unlocked? Need more info.
Sent from my R800i using Tapatalk 2
chery2k said:
Is your bootloader unlocked? Need more info.
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
no man i didn't unlock the bootloader,i can't do it with flashtool
Sony now has the ability to give out unlock codes for the Play, if my memory serves. You may want to try it. It will break any warranty you have, so be aware of that.
Sent from my SCH-I535 using Tapatalk 2
If you didnt unlock your bootloader before installing a custom rom. Idk how else to help you. You might have to send off your xperia play to Sony.
brainard52 said:
Sony now has the ability to give out unlock codes for the Play, if my memory serves. You may want to try it. It will break any warranty you have, so be aware of that.
Sent from my SCH-I535 using Tapatalk 2[/Qid
i took the code but now i can't do anything cuz my xperia doesn't even go to recovery .....anyway thnx!!!
Click to expand...
Click to collapse
Simple fix
klaudiohavari said:
brainard52 said:
Sony now has the ability to give out unlock codes for the Play, if my memory serves. You may want to try it. It will break any warranty you have, so be aware of that.
Sent from my SCH-I535 using Tapatalk 2[/Qid
i took the code but now i can't do anything cuz my xperia doesn't even go to recovery .....anyway thnx!!!
Click to expand...
Click to collapse
No phone is bricked!!!! hardware does not boot with out software. there was a way they put it in so im going to help you fix it!!!
i have bricked my phone several times and im a pro at fixing them too! lol
question one does your phone turn on?
If it does what does it do?
do you have ANdroxide Flash tool?
Click to expand...
Click to collapse
Yes use his flashtool. But the real question can you use it if your bootloader is locked.
works on both
If a boot loader is locked it means its intact hense the word locked. So the phone boots so all you have to do is..
Download your stock ftf file for you phone.
Hold the back button when you connect your phone and flash your firmware back. Light should turn green.
If it don't hold the power button while you connect it Sonay used this method to put it in the first time.i
Rmontoya83 said:
If a boot loader is locked it means its intact hense the word locked. So the phone boots so all you have to do is..
Download your stock ftf file for you phone.
Hold the back button when you connect your phone and flash your firmware back. Light should turn green.
If it don't hold the power button while you connect it Sonay used this method to put it in the first time.i
Click to expand...
Click to collapse
i solved the problem opening fastboot and i pressed search button for 5minutes and the light blue blinked ...i flashed the stock rom with flashtool now it's like new ,,,,,,thank ya all for ur answers ,u are the best
Bricked phone
Rmontoya83 said:
klaudiohavari said:
No phone is bricked!!!! hardware does not boot with out software. there was a way they put it in so im going to help you fix it!!!
i have bricked my phone several times and im a pro at fixing them too! lol
question one does your phone turn on?
If it does what does it do?
do you have ANdroxide Flash tool?
Click to expand...
Click to collapse
Hi
I was hoping you could help me. I rooted my play and was following a youtube video as descibed. I couldn't attach the link because I am a new member. It was the new ics 4.0.4 from the android doctor - 100% bug free gaming rom. I had difficulty in flash tools when i needed to go into fastboot mode to install the Lupus kernel. So I installed the cwm mode from the internet and tried to install the ics from its recovery mode. Now I just get the sony logo, then the screen goes black. It is still on. I have reinstalled flashtools and have seen some stock roms on this site to download. The problem I have is when I select the rom to flash, whilst it recognises that my phone is in flash mode, I get a error flash cancelled. I have tried 3 different stock roms. I am in the process of downloading Emma - a flashtool from Sony. Hopefully my phone is not screwed. It was on 2.3.4. One week old unlocked rx800i. Any help would be appreciated.
Thanks..
Tommy
Click to expand...
Click to collapse
You guys remember about 2011 June, a problem came up with unlocked bootloader and OTA update. the first fix that came out broke the radio rom or something so your phone won't accept any sim but will boot and be like a psp or media player. well. that happened to me. and 2 years down the line, i'm still with my play hoping someone could come up with a solution for that.
boots up fine. plays games and audio video no probs but still can't accept any sim in it.
Specs are as follows
model R800i
android version 2.3.4
baseband number 8x55A-AAABQMAZM-203028D-56
Kernel Version 2.6.32.9-perf
[email protected] #1
Build Number 4.0.2.A.0.42

Categories

Resources