Power Button Not Working??? (FIX) - Samsung Epic 4G Touch

I had my wifes phone on Agat's ROM and it started acting up on her battery dying insanely quick and screen not locking.
So I used the Stock/Rooted One Click FI27 and hoped that would fix the issue. But it didn't.
The power button will not lock the phone. The phone will not goto sleep if you just lay it there and let it lock itself the screen will go off but it will come back on. The power button will work only for a few things if you hold it down for 10 sec it will reboot and to get into recovery/download mode. If I put into DL Mode by holding power/vol down it will reboot immediately. The only way I could get it to stay in download mode is to reboot from custom recovery too it.
I don't have insurance on the phone unfortunately. The phone is in like perfect condition never been water damaged and always had an otter case. Anyone had this issue before or have any advice to fix it?
Thinking about taking it apart and looking at the power button

It happens on ics. You will have to replace the power button.

How does ICS make this happen? Has it happened to you? Any idea where to go for a replacement power button??
Sent from my SPH-L710 using xda app-developers app

Nevermind, found what I need.

mikeregister said:
Nevermind, found what I need.
Click to expand...
Click to collapse
how did you fix it?

ICS does not cause the power button to stop working. Where you heard this information is completely wrong.
Sent from my SPH-D710 using xda premium

Mattix724 said:
ICS does not cause the power button to stop working. Where you heard this information is completely wrong.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I too was wandering how an OS can cause a hardware related issue.
Anyway, how I fixed it was by taking it apart and I got some pliers and squeezed the metal piece around the button (see attached photo)
I didn't squeeze it to hard though this piece is very small (I actually used my camera on the GS3 to zoom in so I could see it) but I squeezed firmly I guess you can say.
I put the phone together and locked and unlocked the phone about 100 times and it worked just like it was supposed too
Sent from my SPH-L710 using xda app-developers app

mikeregister said:
I too was wandering how an OS can cause a hardware related issue.
Anyway, how I fixed it was by taking it apart and I got some pliers and squeezed the metal piece around the button (see attached photo)
I didn't squeeze it to hard though this piece is very small (I actually used my camera on the GS3 to zoom in so I could see it) but I squeezed firmly I guess you can say.
I put the phone together and locked and unlocked the phone about 100 times and it worked just like it was supposed too
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I've taken my phone apart as well and I can't seem to make out what that pic looks like, it's too blurry
edit: nevermind, I see it now
---------- Post added at 03:09 AM ---------- Previous post was at 02:47 AM ----------
mikeregister, I did what you did and it worked! thank you SO MUCH! I was going insane this whole day. you're a lifesaver.

monotune said:
I've taken my phone apart as well and I can't seem to make out what that pic looks like, it's too blurry
edit: nevermind, I see it now
---------- Post added at 03:09 AM ---------- Previous post was at 02:47 AM ----------
mikeregister, I did what you did and it worked! thank you SO MUCH! I was going insane this whole day. you're a lifesaver.
Click to expand...
Click to collapse
Yea that piece is so small was hard to get a better picture. But, that's awesome man glad it worked for you!!!
Sent from my SPH-L710 using xda app-developers app

Hey monotune come back in a few days and let us know if everything is still going well with the power button. I will do the same.

Well, It happened to a couple of people i know who were on fh13. And it was the button that caused the issue. Infact it was also rebooting. and the phone was not able to lock. So fixing the power button solved the issue.

So are you saying that little gap on the back of the switch needs to be bent close
Sent from my SPH-D710 using xda premium

djjosh said:
So are you saying that little gap on the back of the switch needs to be bent close
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yes the metal piece surrounding the button. Would explain more but I'm driving from Seattle to SoCal right now... but good luck.
Sent from my SPH-L710 using xda app-developers app

Hey Mike.
I posted a thread here concerning power button repair and I'm linking your thread on the OP as well. Thanks again for the info. TD
http://forum.xda-developers.com/showthread.php?t=1958630

Well, my wife's phone slowly started having random reboots again which was what happened before the power button quit working last time. Then the power button started only working sometimes and the screen was turning on and off again like before.
So, I decided to take it apart again and play with the power button a little bit and to my great luck the power button fell off.
So I'm warning everyone that trys this BE CAREFUL. As if you didn't know that anyway.
Oh well, the wife is using my old Epic now maybe I will send it in too the place in your threads tdunham.
Hopefully those who try this get more than a temporary fix unlike me.
Sent from my SPH-L710 using xda app-developers app

My power button recently stopped working too. Some weird coincidence?

Was the button itself soldered onto the board? Would it be as easy as heating the solder from the bottom of the board to reattach it or is it held in place by interlocking pins?

AlkaliV2 said:
Was the button itself soldered onto the board? Would it be as easy as heating the solder from the bottom of the board to reattach it or is it held in place by interlocking pins?
Click to expand...
Click to collapse
This thread is dead. Why necropost?
Sent from my SPH-D710 using xda premium

After messin around with the power button I finally got it to work. Thanks for paving the way!

Awesome sauce
mikeregister said:
I too was wandering how an OS can cause a hardware related issue.
Anyway, how I fixed it was by taking it apart and I got some pliers and squeezed the metal piece around the button (see attached photo)
I didn't squeeze it to hard though this piece is very small (I actually used my camera on the GS3 to zoom in so I could see it) but I squeezed firmly I guess you can say.
I put the phone together and locked and unlocked the phone about 100 times and it worked just like it was supposed too
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
You sir are A LEGEND! Did exactly as you had done, and it worked perfect.
Thank you very much!

Related

Volume Buttons?

Does anybody know where I can get a replacement volume button or can someone sell me one?
Sent from my R800x using XDA
What happened to your volume buttons?
0mega007 said:
What happened to your volume buttons?
Click to expand...
Click to collapse
They broke off and I cant find them.
Sent from my R800x using XDA
How they broke off, on normal use or on a drop?
0mega007 said:
How they broke off, on normal use or on a drop?
Click to expand...
Click to collapse
I don't believe that matters.
Sent from my R800x using XDA
Try here
You can always try cellular depot. (Sorry. Would post link, but I had to make a new account, and noobs can't post links) It could be considered part of the housing.
savage24x said:
I don't believe that matters.
Click to expand...
Click to collapse
Actually it could help, if they broke off during normal use, you could probably take it to the carrier store and get it fixed for free.
If it fell and broke you would have to take it to a cell phone repair store.
Sent from my R800x using XDA
masonraus said:
Actually it could help, if they broke off during normal use, you could probably take it to the carrier store and get it fixed for free.
If it fell and broke you would have to take it to a cell phone repair store.
Sent from my R800x using XDA
Click to expand...
Click to collapse
I'll say it dropped. I prefer to do repairs myself.
Sent from my R800x using XDA
Bump. I need an answer.
Sent from my R800x using XDA
Guess I'm going to bump this again. Sorry, but does anybody know?
The main problem here I suppose is that the XPlay's volume button, unlike the previous Java-based SE phones (i.e. K810i, which I previously owned), do not have the extra piece of plastic around the volume button that acts as an anti-dropping-off catch for the hole to which it fits in. It's a weird move by SE I suppose. Thinking how the rubber part easily separates from the actual volume button, I can imagine there are a lot of XPlay users who get disappointed going home to see their volume button has fallen off somewhere on the road when they were on their way home. Shame. Good thing mine fell off when me and my wife were browsing pictures of our baby in my bed. Jeez.

How to fix loose buttons?

Hey guys so I don't know if anyone else has had this problem but my volume buttons are a bit loose and they rattle if I shake the phone. I tried tightening the screws on the back but it didn't do much. Is there any trick to make then fit better or just stop raddling?
Sent from my SGH-I747M using xda premium
Stop thinking about them is the best option. Unless they fall off or get compacted I wouldn't worry about them.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
yea... tightening the screws on the back of the phone would probably do little more than run the risk of stripping the threads or something. Generally, there isn't anything holding these types of buttons in place aside from the overall design of the phone being done to have them nicely seated in place. Chances of anything happening just because of wiggling buttons are slim, IMHO.
Buy an iPhone.
Haha sorry I had too
Sent from my SAMSUNG-SGH-I747 using xda premium
I had the same problem, you can actually pop out the volume button pretty easily by using your nail and pulling. All that's holding it in is a rubber piece under the volume button. Once I had it out I tried to realign the rubber piece on the volume rocker and popped it back into the phone. Now it no longer rattles. :laugh:
cmjkxa said:
I had the same problem, you can actually pop out the volume button pretty easily by using your nail and pulling. All that's holding it in is a rubber piece under the volume button. Once I had it out I tried to realign the rubber piece on the volume rocker and popped it back into the phone. Now it no longer rattles. :laugh:
Click to expand...
Click to collapse
I tried to do this... one question... what kind of nails do you have?!
Sent from my SGH-I747M using xda premium
Lol short ones. Try using a credit card. You can't break it because its just rubber holding it in.
Sent from my SAMSUNG-SGH-I747 using xda premium
This should be covered under warranty, have you contacted the reseller.
No I haven't. What do you think ATT would do?
Sent from my GT-N8013 using XDA Premium HD app
cmjkxa said:
I had the same problem, you can actually pop out the volume button pretty easily by using your nail and pulling. All that's holding it in is a rubber piece under the volume button. Once I had it out I tried to realign the rubber piece on the volume rocker and popped it back into the phone. Now it no longer rattles. :laugh:
Click to expand...
Click to collapse
tempted to try this but kind of scared lol
awaken13 said:
tempted to try this but kind of scared lol
Click to expand...
Click to collapse
Same here lol tried a little with my fingernails and didn't even get close.
Sent from my GT-N8013 using XDA Premium HD app

Power Button loosened

Anybody know a fix for it? Maybe there is some trick to make it pop out again back to normal position
Sent from my SGH-T999
Got to get a new one
Sent from my SGH-T999 using xda premium
It still works. It was like that since day 1. Probably nothing big i just notice that the volume buttons are not that loosened+if i get another one they will give a refurbished and i do not want that.
Sent from my SGH-T999
Mine is the same way right out of the box :-\ hope its not an issue later... I just got this phone set up and really don't feel like doing again so soon.
Sent from my SGH-T999 using XDA Premium HD app
I have it too. Getting a new one
Sent from my SGH-T999 using Tapatalk 2
So the new replacement is it gonna be a refurbished one or brand new?
Sent from my SGH-T999
New unit. Don't even bother. I got one. Worse than the first.
Sent from my SGH-T999 using Tapatalk 2
junkiehyjinx said:
Mine is the same way right out of the box :-\ hope its not an issue later... I just got this phone set up and really don't feel like doing again so soon.
Sent from my SGH-T999 using XDA Premium HD app
Click to expand...
Click to collapse
...??? Nandroid?
Take it apart....set the power button back in its spot. The power button has a gel like button Behind it and sometimes the physical button can go past that. Anyways that's what I did. Just be careful when unscrewing the screws don't strip them or they will see it was tampered with if u do decide turn it in for warranty. And almost always its a refurb....that's why I said eff that
sarni84 said:
Take it apart....set the power button back in its spot. The power button has a gel like button Behind it and sometimes the physical button can go past that. Anyways that's what I did. Just be careful when unscrewing the screws don't strip them or they will see it was tampered with if u do decide turn it in for warranty. And almost always its a refurb....that's why I said eff that
Click to expand...
Click to collapse
I almost never use it so is ok the way it is.

S pen issue

So whenever I try and use the s pen it sucks. If I hover over anything it acts like i selected it. I just want to know is there a way to disable this. I don't want the s pen to do anything unless I actually touch the screen with it.
Sent using Tapatalk 2
Return it . My brobwas doing the same thing and he returned it
Sent from my SGH-T889 using xda app-developers app
My phone also does this. I'm waiting to see how bad of a problem this is before I make my decision.
Sent from my SGH-T889 using xda premium
thunderbread said:
So whenever I try and use the s pen it sucks. If I hover over anything it acts like i selected it. I just want to know is there a way to disable this. I don't want the s pen to do anything unless I actually touch the screen with it.
Sent using Tapatalk 2
Click to expand...
Click to collapse
I believe that's the Airview feature of the S-Pen which you can disable from the S-Pen option settings.
It's a known problem.
Some people have taken the pen apart. Rather, i just slammed the pen on a hard surface a few times.
Fixed. I'm not joking. Try it. I promise you it will work
Sent from my SGH-T889 using xda app-developers app
a4 moda said:
It's a known problem.
Some people have taken the pen apart. Rather, i just slammed the pen on a hard surface a few times.
Fixed. I'm not joking. Try it. I promise you it will work
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
What, like throw it down flat, or stab the point onto a hard surface?
Had the same problem, returned the phone and got a new one.
Sent from my SGH-T889 using xda premium
Stewall said:
What, like throw it down flat, or stab the point onto a hard surface?
Click to expand...
Click to collapse
Protect the point ! Just slap the sides down on a hard surface.
Sent from my SGH-T889 using xda app-developers app
fixed
I had the same issue. It was fixed after I accidentally dropped my s pen
I can't believe that actuall fixed it. I almost returned it! Thanks
Sent from my SGH-T889 using xda premium
Mine is fixed now too....before the tip wasnt springy and now it is.....wow works perfectly!
dchtlh said:
Mine is fixed now too....before the tip wasnt springy and now it is.....wow works perfectly!
Click to expand...
Click to collapse
too funny!
maybe they should put that in the user manual!!
Glad it's working for you. Cant wait to get mine on the 29th
Holy ****, it fixed mine. I dropped it with a little bit of force, and sure enough it quit messing up. I appreciate it. I was also about to return mine.
I ended up swapping my pen for a returned pen. Tapping the pen mostly fixed it but it still had a problem on a the right side of the screen where I would have to tap really hard to activate a button press.
Sent from my SGH-T889 using xda premium
Cant wait to get one so i slam fixit go sammysung haha
Sent from my SGH-T959V using xda premium
Best troubleshooting for your S Pen
Thanks this method worked for me too!!! Gave it two gentle slams on the table and was good to go. LMAO!! I called samsung to report the issue and they had no way of helping me out, I will call them back and have them implement this technique into their troubleshooting steps.
S Pen Issue
Having a problem, wondering if its just me.. When i go to use S Note, the pen is automatically set to the eraser, and if i select the brush mode, its still using the eraser. I can only write if i press and hold the button on the s pen, then bring it close to the screen.. and then its like an etch a sketch where my lines would all be connected.. As soon as I take the s pen away from the screen and go to write again, its back on the eraser! any help would be greatly appreciated..- Matt
That's not how it's supposed to work. Maybe you have a defective device? Either way I would bring it back to T-Mobile to get it checked out. Are you running a custom rom?
Sent from my SGH-T889 using xda premium
Mine was hover selecting too but updated to the latest OTA, still had the issue. So I disabled and re-abled Air View and my problems were fixed. All has been good for a few days.
Yeah, it was working before but now its just all screwy, im waiting for my buddy who also has the Note 2 for tmo to come by im going to try his pen. This way I can figure out if its the pen or the phone. Thank you for letting me know that this isnt how its supposed to work!

Messed up screen

My wife let out 2 year old play with her phone. He threw it on the ground and now the screen looks like this. Any ideas?
Sent from my SGH-T999 using xda app-developers app
Damaged digitizer. Not cheap to fix.
Sent from my SGH-T999 using XDA Premium 4 mobile app
Supamike88 said:
My wife let out 2 year old play with her phone. He threw it on the ground and now the screen looks like this. Any ideas?
Click to expand...
Click to collapse
It may not be the Digitizer. This phone has had a lot of abuse hurled at it by various members of Toddler class. It has time and again proved to be solid.
Just to rule on hardware or software issue, can you comment on if there are any other issues except display ? Also did the 2 year old threw on hard concrete or carpet ?
Haven't noticed any problems but the screen and he threw it on tile floor
Sent from my SGH-T999 using xda app-developers app
Perseus71 said:
It may not be the Digitizer. This phone has had a lot of abuse hurled at it by various members of Toddler class. It has time and again proved to be solid.
Just to rule on hardware or software issue, can you comment on if there are any other issues except display ? Also did the 2 year old threw on hard concrete or carpet ?
Click to expand...
Click to collapse
Well just about 25% of the status bar is black as well as part of the screen. I'm sure rebooting the device or doing a factory reset isn't going to fix it.
But hey let's see. Supamike88 boot into recovery and see if the issue with the display is present there. To get into recovery press and hold volume up, home button and the power button and release them when the phone vibrates and you see blue text in the upper left corner of the screen (which in this case you might not see because of the screen). Is the issue still present?
You could do a factory reset to see if it fixes the screen, just back up everything before doing so.
Sent from my SGH-T999 using XDA Premium 4 mobile app
The whole screen is pretty much black now
Sent from my SGH-T999 using xda app-developers app
Supamike88 said:
The whole screen is pretty much black now
Click to expand...
Click to collapse
Are you not able to turn on at all ? If that's the case, then its probably goner.
Supamike88 said:
The whole screen is pretty much black now
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
If the screen is black but the phone still works, then its most likely the digitizer like I pointed out earlier.
You can buy a new digitizer and replace it, but its not really recommended. You might as well get another S3.
You could also just sell it for parts and try to get another S3. (I wouldn't recommend this unless you can do a factory reset).
Sent from my SGH-T999 using XDA Premium 4 mobile app
Perseus71 said:
Are you not able to turn on at all ? If that's the case, then its probably goner.
Click to expand...
Click to collapse
I called T-Mobile and they're gonna send me a new one. Luckily their isn't a crack on the screen so it doesn't look like something we did
Sent from my SGH-T999 using xda app-developers app
Supamike88 said:
I called T-Mobile and they're gonna send me a new one. Luckily their isn't a crack on the screen so it doesn't look like something we did
Click to expand...
Click to collapse
Good for you. Please note, when you get the new device back, carefully read the label behind the battery. You may get SGH-T999L instead of existing SGH-T999. The L stands for LTE. If that happens, you will be in luck. But need to understand its not the same device but rather newer version.

Categories

Resources