Since I've updated to froyo I can't fully charge my battery. Since I'm charging it over night, on the mornings I get random percentages, but always not 100% - sometimes 91%, 94%, 95%, etc. I saw other posts with such behavior, but I did not find the reason for this.
I've tried full discharge, as much as it is possible since on below 5-6% the phone automatically shuts down. I've tried on the morning unplug it, then plug it again after 5-10 minutes, but no gain.
PS. just to note that the battery life is a lot better with Froyo. Part of it is maybe because I do not have so much battery sucking apps like before, but still.
Hey what's up. I got this G2 with the latest cm7, which is build number 21 and the battery life is horrible. Like 8 hours with an hour of the display being on. I'm coming from the Epic which had pretty good battery life once calibrated.
So what's the proper way of calibrating the G2? I am using the stock kernel that comes with the Cm7 rom right now but I did try the pershoot kernel couple times and underclocked it but it still didn't help. I think all that kernel flashing messed up my battery life. So any ideas? Thanks!
Sent from my HTC Vision using Tapatalk
saywhat4118 said:
Hey what's up. I got this G2 with the latest cm7, which is build number 21 and the battery life is horrible. Like 8 hours with an hour of the display being on. I'm coming from the Epic which had pretty good battery life once calibrated.
So what's the proper way of calibrating the G2? I am using the stock kernel that comes with the Cm7 rom right now but I did try the pershoot kernel couple times and underclocked it but it still didn't help. I think all that kernel flashing messed up my battery life. So any ideas? Thanks!
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
Charge your phone all the way to 100% (not just until the LED turns green, which is around 90%), unplug and boot into recovery, wipe battery stats, boot back into Android and use your phone until the battery drains and your phone shuts off. Keep trying to power up until it won't any more.
Now, plug your phone in (into the wall, not a computer) and charge until full *without* turning it on. Remember, the LED turns green around 90% so you'll need to leave it another few hours after the LED changes. Once you're full, unplug and boot into Android and again use it until the battery is fully drained and you can't power up anymore and you're good to go.
Remember, after wiping stats, during the draining process *do not* plug it in to the charger or your computer as thiss will mess up the calibration.
Its a pain, and takes a day or so, but its worth it. To speed up the draining process, do some process intensive things (video watching, game playing, etc.)
Sent from my T-Mobile G2 using XDA App
OriginalGabriel said:
Charge your phone all the way to 100% (not just until the LED turns green, which is around 90%), unplug and boot into recovery, wipe battery stats, boot back into Android and use your phone until the battery drains and your phone shuts off. Keep trying to power up until it won't any more.
Now, plug your phone in (into the wall, not a computer) and charge until full *without* turning it on. Remember, the LED turns green around 90% so you'll need to leave it another few hours after the LED changes. Once you're full, unplug and boot into Android and again use it until the battery is fully drained and you can't power up anymore and you're good to go.
Remember, after wiping stats, during the draining process *do not* plug it in to the charger or your computer as thiss will mess up the calibration.
Its a pain, and takes a day or so, but its worth it. To speed up the draining process, do some process intensive things (video watching, game playing, etc.)
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Thanks for the tip. Now I have been doing some reading and saw some people recommended charging the phone while it is on when it is fully discharged the first time. You recommend while its off? Does it make a huge difference?
saywhat4118 said:
Thanks for the tip. Now I have been doing some reading and saw some people recommended charging the phone while it is on when it is fully discharged the first time. You recommend while its off? Does it make a huge difference?
Click to expand...
Click to collapse
I don't think it would make that big of a difference; if you think about it though, you're dealing with the battery and battery only if the system is turned off.
Sent from my T-Mobile G2 using XDA App
True we are dealing with the battery but when we wipe the battery stats I think it only wipes the battery information the phone had in its system. So if we wiped the stats when it is full then let it discharge till completely empty, im assuming, you would have to charge it while its on so the phone can now learn what the battery level is and when its full and its capacity. I'm just guessing I could be wrong though. I'm just going to try both and see what happens.
Sent from my HTC Vision using Tapatalk
OriginalGabriel said:
Charge your phone all the way to 100% (not just until the LED turns green, which is around 90%), unplug and boot into recovery, wipe battery stats, boot back into Android and use your phone until the battery drains and your phone shuts off. Keep trying to power up until it won't any more.
Now, plug your phone in (into the wall, not a computer) and charge until full *without* turning it on. Remember, the LED turns green around 90% so you'll need to leave it another few hours after the LED changes. Once you're full, unplug and boot into Android and again use it until the battery is fully drained and you can't power up anymore and you're good to go.
Remember, after wiping stats, during the draining process *do not* plug it in to the charger or your computer as thiss will mess up the calibration.
Its a pain, and takes a day or so, but its worth it. To speed up the draining process, do some process intensive things (video watching, game playing, etc.)
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I have used this method to calibrate the battery and can say that it does have a pretty big impact on battery life. +/- 20% in my case. I also find that I need to re-calibrate roughly once every month or so.
To be clear, there is not such thing as "calibrating the battery", you are calibrating the battery meter (volt meter) on the phone. Maybe its just a semantic distinction, and that is what the OP and subsequent replies are talking about. But many people get this confused, due to the old process of "conditioning" NiCad batteries, which is not applicable to modern cell phone (Li ion) batteries.
In my understanging, you aren't going to increase battery life by doing any of the above, but only making the battery meter more correctly read how much power is left. For instance, if the meter is not properly calibrated, it may read lower than it should. So people think they are increasing their battery life.
I would discourage from discharging the battery to empty. Over discharge of Li ion batteries can possibly (not often, but in a small percentage of cases) prevent the battery from taking a charge. There is a safety circuit which is supposed to prevent over discharge, but it does not always work. Therefore, Li ion batteries should not be discharged lower then 20% whenever possible. Most of us do it from time to time on accident, but there is not reason to do it intentionally. Charge the battery to 100%, drain to 20%, and repeat a couple times. This will get your battery meter plenty accurate. Draining it to empty does not really gain you anything (the battery meter is not that accurate in the best of circumstances, anyway), and can harm the battery.
http://batteryuniversity.com/learn/article/do_and_dont_battery_table
Flashing a new ROM resets the battery meter. So until its properly calibrated, it will give you junk readings. This is one reason why people often jump the gun and think that a custom ROM is getting them poor battery life. Calibrate the meter, and use the ROM for a couple days, then you should get a real indication of what the battery life is like on that ROM.
redpoint73 said:
I would discourage from discharging the battery to empty. Over discharge of Li ion batteries can possibly (not often, but in a small percentage of cases) prevent the battery from taking a charge. There is a safety circuit which is supposed to prevent over discharge, but it does not always work. Therefore, Li ion batteries should not be discharged lower then 20% whenever possible. Most of us do it from time to time on accident, but there is not reason to do it intentionally. Charge the battery to 100%, drain to 20%, and repeat a couple times. This will get your battery meter plenty accurate. Draining it to empty does not really gain you anything (the battery meter is not that accurate in the best of circumstances, anyway), and can harm the battery.
Click to expand...
Click to collapse
I was about to post this. Letting a LiIon discharge all the way is more harmful to the battery than recharging it mid drain cycle.
I'm having a bit of battery issues, I haven't flashed a ROM or calibrated my battery meter. So I charge my phone to full while still on, unplug it and drain it until it turns off (NOT until the battery is completely drained, which could potentially damage the battery), plug it up and let it charge while off, and I should be calibrated?
Do you need to have root to be able to reset battery stats?
Sent from my T-Mobile G2 using XDA App
About a month ago, I flashed Gingerbread onto my Epic 4G. Did nothing else, been running the usual BatteryLife by CurveFish without any hiccups or fluctuating readings.
However, recently, I don't seem to be getting a full charge. Or, the battery likes to drain. Either that or BatteryLife is not giving proper readouts anymore. For example, I can plug my phone in and let it charge. Its LED will go blue and the widget shows 100%. But, now, sometimes I'll look at the phone again later (while it's still connected with the charging cord or not) and the widget will read something like 82%. And, just now the widget is now showing 78%.
My battery has been fully discharged and recharged many times before for proper calibration. I even ran a battery calibration app. Still, this problem happens. What exactly is going on? I have had the phone tethered to remain charged and never once had a problem with the battery. I do know when I flashed Gingerbread, my battery life has increased dramatically.
Charge till you get the fully charge notification
Then turn off
Then go into click work recovery
Go to advanced
Click reset battery stats or something like that
Put back on charger
This proly happens cause of overheats from the super crap **** gb leaks
Also discharging the battery doesn't help
Sent from my SPH-D700 using XDA Premium App
Then, why does everyone say to get the most out of your battery, you discharge it fully then charge it up to 100% about a couple times to maintain proper battery life and calibration?
There is an issue with some installations of the gb leaks where the battery stops charging at 100% even when it is still plugged in. I had this issue and could not remedy it. Went back to a solid ec05 base and my charging works fine again.
Hey XDA, I just purchased a new AT&T SGS3 and I'm having some issues with the battery on the phone.
When I charge the phone overnight it charges to 100% then when I unplug it, the battery drops tremendously in about 5 seconds down to anywhere from 50%-75%. I tried manually recalibrating the battery by charging it 8+ hours, removing the battery, charging again while off, charging it again while on, then restarting. That seemed to work for one charge and the battery acted the way that it would have on my Nexus S.
However charging it again after a full battery drain, the same thing happened.
Also when the phone is low on battery, it displays the normal battery messages, but then the screen stays on, draining the battery faster.
Solutions? I want the root the phone, but only after I have these issues sorted out. (I'm still under warranty right now)
zobbyblob said:
Hey XDA, I just purchased a new AT&T SGS3 and I'm having some issues with the battery on the phone.
When I charge the phone overnight it charges to 100% then when I unplug it, the battery drops tremendously in about 5 seconds down to anywhere from 50%-75%. I tried manually recalibrating the battery by charging it 8+ hours, removing the battery, charging again while off, charging it again while on, then restarting. That seemed to work for one charge and the battery acted the way that it would have on my Nexus S.
However charging it again after a full battery drain, the same thing happened.
Also when the phone is low on battery, it displays the normal battery messages, but then the screen stays on, draining the battery faster.
Solutions? I want the root the phone, but only after I have these issues sorted out. (I'm still under warranty right now)
Click to expand...
Click to collapse
Did you try a reset of the phone through the settings ? After that try charging to 100% then drain completely and then recharging without break then use the phone mormally and try to recharge only when it hits 10% remaining for the next 2 or 3 charge cycles and see if that helps
zobbyblob said:
Hey XDA, I just purchased a new AT&T SGS3 and I'm having some issues with the battery on the phone.
When I charge the phone overnight it charges to 100% then when I unplug it, the battery drops tremendously in about 5 seconds down to anywhere from 50%-75%. I tried manually recalibrating the battery by charging it 8+ hours, removing the battery, charging again while off, charging it again while on, then restarting. That seemed to work for one charge and the battery acted the way that it would have on my Nexus S.
However charging it again after a full battery drain, the same thing happened.
Also when the phone is low on battery, it displays the normal battery messages, but then the screen stays on, draining the battery faster.
Solutions? I want the root the phone, but only after I have these issues sorted out. (I'm still under warranty right now)
Click to expand...
Click to collapse
Looks like a bad device. I would send it in if i were you.
Hello,
I've read the threads about battery in the desire, BATT FIX with new kernels etc but can't really find a definite answer for my problem.
I bought my phone 18 months old and from the beginning it has shut down at about 20%. Tried the battery thing with charging, on/off, charing again etc, wiping battery stats etc but it doesn't seem to matter. So, I thought I'd just buy a new battery and be done with it.
The new battery arrived yesterday (actually, it's a used battery from customer returns but seller tells me it's been tested to be in mint condition). So this battery shows 3% when I first start up with it, "good, this seems to work" I think. But when at 75% the charger indicator (LED light) all of a sudden turns green and battery % jumps straight to 100%. I do the battery calibration trick with on/off charge and wipe battery stats. Stuck at 100% for some time as reported by others trying this "trick", have been using it all day and it shuts down at 25% even worse than the other battery...
The best voltages I've seen on this supposedly new battery is 4,144 and somewhere above 3.5 (nowhere near 3.2 and 4.2). What strikes me as odd is that I get very close to the same values with my old battery so I'm starting to think that maybee both battery are good but the phone reports way wrong values...is this possible?
Battery life with phone and data connection on, 1 gmail account but disabled backup feature (no GPS, BT etc) gives me -5% after 10 hours standby and I can use the phone for browising, light gaming for about 3 hours and 40 minutes before it dies (more or less constant usage at very low autobrightness levels and Turbo 3G enabled).
If someone has some insight into this it would be really helpful before I contact the eBay seller for this particular battery.
Regards, Olle
Same thing
My phone shuts down at 35% now... Is that a problem with the chipset or what? Only with Alex-V's calibrated kernels my phone shuts down at 0%, and sometimes it decalibrates too, but after calibration is Okay. I wonder if i need a new battery or my chipset has issues.