Hey guys, I need your help again.
How do I install cwm (latest) on fi27 ics rooted? I think every time I have installed it was through odin.
Thanks in advance everyone.
Post 2 and 3.
http://forum.xda-developers.com/showthread.php?t=1953783
Sent from my SPH-D710 using XDA
BluesRulez said:
Post 2 and 3.
http://forum.xda-developers.com/showthread.php?t=1953783
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I looked but confused. I am new to this and I knew how to do this with ff18, but not fi27. is there any difference? Needing someone to break it down in newb directions Thanks
Which part confused you? And how did you do on ff18?
Sent from my SPH-D710 using XDA
BluesRulez said:
Which part confused you? And how did you do on ff18?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
a qbking77 video on youtube.
06GTFanatic said:
a qbking77 video on youtube.
Click to expand...
Click to collapse
Videos are old. Which one is it?
Sent from my SPH-D710 using XDA
BluesRulez said:
Videos are old. Which one is it?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=C9gPljlBfDM&feature=plcp
06GTFanatic said:
http://www.youtube.com/watch?v=C9gPljlBfDM&feature=plcp
Click to expand...
Click to collapse
That is the auto root package which is no longer updated. Do you want CWM to flash a new rom? If so follow the steps I posted in post 2.
What do you want CWM for is important to know here..
BluesRulez said:
That is the auto root package which is no longer updated. Do you want CWM to flash a new rom? If so follow the steps I posted in post 2.
What do you want CWM for is important to know here..
Click to expand...
Click to collapse
there is a new jelly bean camera apk out, that i wanna flash on to my phone. but my phone has stock recovery. i don't think it matters if i have agat or cwm. just need something to flash with. i am pretty stupid, if i don't have some video with a play by play to it. i've done it enough to be familiar with it, but not enough to jump right in and be over confident in what i'm doing.
06GTFanatic said:
there is a new jelly bean camera apk out, that i wanna flash on to my phone. but my phone has stock recovery. i don't think it matters if i have agat or cwm. just need something to flash with. i am pretty stupid, if i don't have some video with a play by play to it. i've done it enough to be familiar with it, but not enough to jump right in and be over confident in what i'm doing.
Click to expand...
Click to collapse
If it is apk, it has to be installed like a regular app. Cwm is needed for zip files. Qbking77 made a video. I don't consider ics stock repack kernels safe which is what is shown in the video.
Sent from my SPH-D710 using XDA
BluesRulez said:
If it is apk, it has to be installed like a regular app. Cwm is needed for zip files. Qbking77 made a video. I don't consider ics stock repack kernels safe which is what is shown in the video.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
so what do you suggest? that video you posted was just released. no wonder i missed it.
download mobile odin and then flash a ics cwm recovery through mobile odin and youll have a custom kernel and and working recovery.. i recommend kuban kernel or agat kernel.. if you read either of those threads it tells you how to..
Sent from my SPH-D710 using xda app-developers app
still not working...=(
http://forum.xda-developers.com/showthread.php?t=1942823
the video you have given me i have already done this step by step and everything went well. now installing "CWM" is the problem. none of the download links from the above address are working.... :crying:
Related
So im not to familar with samsung phones as im coming from the evo. My question is how i would go about flashing the newest AOKP. My epic touch is fresh running el29. Do i need to root first or can i just odin a gb rom with cwm recovery an go from there?
Sent from my SPH-D710 using XDA
What i did first was flash a rooted kernel with Odin .
Odin:http://forum.xda-developers.com/showthread.php?t=1274337
Kernels :http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_II/SPH-D710/Kernels i like Team Rogues Kernels
Now that your rooted boot into recover by holding volume up + power at the same time and make a backup of your current Rom
Then i just followed the install guide for whatever Rom i was flashing .
I like http://forum.xda-developers.com/showthread.php?t=1578880 rom because everthings working and it is updated all the time
If you need any help flashing anything PM me any time im at wotk or i would get into depth on this post
Sent from my SPH-D710 using xda premium
Linux215 said:
What i did first was flash a rooted kernal with Odin .
Then i just followed the install guide for whatever Rom i was flashing .
I like http://forum.xda-developers.com/showthread.php?t=1578880 rom because everthings working and it is updated all the time
If you need any help flashing anything PM me any time im at wotk or i would get into depth on this post
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
thanks alot for the info i was getting real ancy about flashing lol about to take the dive into E4GT flashing!
I know what you mean lolz
I love flashing my phone i cant go a day without flashing something
I updated my first post with links to some kernel .
Sent from my SPH-D710 using xda premium
Linux215 said:
I know what you mean lolz
I love flashing my phone i cant go a day without flashing something
I updated my first post with links to some kernel .
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
sweeeeet thaanks again man
so its safe to flash el26 kernal on a el29 rom??
edit: im also not rooted
What Rom do you plan on flashing first ? Some require you to flash a certain kernel for their Rom .
But it should be ok for you to flash any recovery for your first one to make a back up.
Sent from my SPH-D710 using xda premium
Linux215 said:
What Rom do you plan on flashing first ? Some require you to flash a certain kernel for their Rom .
But it should be ok for you to flash any recovery for your first one to make a back up.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
im goin to try aokp build 32. right now im on el29 brand new phone never messed with. it says in the op of aopk to flash el26 cwm kernal. my question is can i flash that on my el29
Yes you can.
I just looked over the thread on break and just follow the guide and you will be just fine and on a new kickass Rom
Sent from my SPH-D710 using xda premium
Linux215 said:
Yes you can.
I just looked over the thread on break and just follow the guide and you will be just fine and on a new kickass Rom
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
hell yeah! got the kernal flashed now just backin up some files on my sd then ima flash aokp thanks for tha links an help again i think im better understanding my epic touch
sobaked2921 said:
hell yeah! got the kernal flashed now just backin up some files on my sd then ima flash aokp thanks for tha links an help again i think im better understanding my epic touch
Click to expand...
Click to collapse
No problem at all bro I'm glad I could help, if you ever need any help just hit me up and ill help the best I can
Sent from my SPH-D710 using xda premium
sobaked2921 said:
So im not to familar with samsung phones as im coming from the evo. My question is how i would go about flashing the newest AOKP. My epic touch is fresh running el29. Do i need to root first or can i just odin a gb rom with cwm recovery an go from there?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Flashing could be addicting check out the link http://forum.xda-developers.com/showthread.php?t=1525495
I know we had a Flashable.zip to return you to 100% stock. anyone have that lying around? i've got to send my broken t989's usb port in to samsung so I can start cranking some stuff out again. since the usb port is fried ODIN is a no go :[ someone help :]
starskyrob said:
I know we had a Flashable.zip to return you to 100% stock. anyone have that lying around? i've got to send my broken t989's usb port in to samsung so I can start cranking some stuff out again. since the usb port is fried ODIN is a no go :[ someone help :]
Click to expand...
Click to collapse
Wish I could help you with that. But I can help you with this sound piece of advice, if you manage to get that .zip, DO NOT FLASH IT UNTIL you flash the flash counter removal .zip, so they can't tell you ever rooted/flashed on your phone. After flashing that, than proceed to flash that stock .zip...all the best and good luck to you!
Ask mrx ... he does everything stock he have bases on t989$
Sent from my SGH-T989 using xda app-developers app
Yeah there were like 3 zips... Rom kernel and recovery. You turn just remove the super user after that. If anything you should be fine flashing stock ROM and kernel. No need to go to stock recovery
Sent from my SGH-T989 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1374868
I just had to flash that too. Good luck. I also flashed the counter reset zip too. That is in the stickies.
Sent from my SGH-T989 using xda app-developers app
starskyrob said:
I know we had a Flashable.zip to return you to 100% stock. anyone have that lying around? i've got to send my broken t989's usb port in to samsung so I can start cranking some stuff out again. since the usb port is fried ODIN is a no go :[ someone help :]
Click to expand...
Click to collapse
Yes someone help him! I'm missing his PA rom!
Sent from my SAMSUNG-SGH-T989 using xda premium
Couldent you just make a image from the ICS Odin flash
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
don728871 said:
Couldent you just make a image from the ICS Odin flash
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
His USB is fryed, so starskyrob can't, can you do that for him!?
Sent from JMT Goodness
CloudTown3 said:
http://forum.xda-developers.com/showthread.php?t=1374868
I just had to flash that too. Good luck. I also flashed the counter reset zip too. That is in the stickies.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
If you didn't see me post it before, here it is again. The links are in the OP.....
Sent from my SGH-T989 using xda app-developers app
CloudTown3 said:
If you didn't see me post it before, here it is again. The links are in the OP.....
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Dude, he cannot use Odin, his USB is fried. He needs a FLASHABLE zip of stock ROM.
Sent from JMT Goodness
LoopDoGG79 said:
Dude, he cannot use Odin, his USB is fried. He needs a FLASHABLE zip of stock ROM.
Sent from JMT Goodness
Click to expand...
Click to collapse
LD, there is a way to return to stock enough'
Sent from my SAMSUNG-SGH-T989 using xda premium
LoopDoGG79 said:
His USB is fryed, so starskyrob can't, can you do that for him!?
Sent from JMT Goodness
Click to expand...
Click to collapse
Was I not clear or are u stupid you can extract the image from odin and convert it to a flash able cwm ...get it now
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
don728871 said:
Was I not clear or are u stupid you can extract the image from odin and convert it to a flash able cwm ...get it now
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
My bad, didn't read enough
Sent from JMT Goodness
Anyways rob if u want closest to stock flash the MR.X flash able ICS its floating around bro
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I can try to make a CWM/TWRP not De-odexed or rooted out of the stock T989 UVLH1 tar file and make a flashable stock recovery, once I get off work.
Edit 1:Uploading Flash-able SGH-T989 UVLH1 stock rom to Dev-host(20 minutes to finish upload) wait for confirmation i need to test it on my device 1st once is done uploading in the mean time i will make flash-able stock recovery and test it also.
Edit 2:Uploading done both rom and recovery, going to download now both and test it.
Sent from my SGH-T989 w/CM10-Hybrid ParanoidAndroid v2.1(9-8-12)by: gs2usr using XDA app.
Ok testing completed, everything works as it should. The ROM zip will update your kernel to stock.
Might need to flash the UVLH1 radio 1st before flashing the stock recovery.
This is how I did it(tested it):
1. install/flash stock ROM 1st.
2. Once installation completed Reboot to custom recovery.
3. install/flash stock recovery.zip.
4. Power off to verified stock recovery.
SGH-T989_UVLH1_Stock_Odex_zipaligned_signed.zip
http://d-h.st/MAT
SGH-T989_UVLH1_Stock_Recovery.zip
http://d-h.st/UwL
I also have a de-odex and rooted version of this ROM @:
http://forum.xda-developers.com/showthread.php?t=1858435
KRZ-2pa said:
Ok testing completed, everything works as it should. The ROM zip will update your kernel to stock.
Might need to flash the UVLH1 radio 1st before flashing the stock recovery.
This is how I did it(tested it):
1. install/flash stock ROM 1st.
2. Once installation completed Reboot to custom recovery.
3. install/flash stock recovery.zip.
4. Power off to verified stock recovery.
SGH-T989_UVLH1_Stock_Odex_zipaligned_signed.zip
http://d-h.st/MAT
SGH-T989_UVLH1_Stock_Recovery.zip
http://d-h.st/UwL
Click to expand...
Click to collapse
Awesome and thanks! I know starskyrob needs this as has been working on the PA rom. I'm currently using another one posted in his thread and it works great! I honestly have no idea if the guy made it or if he just posted it.
Sent from my SAMSUNG-SGH-T989 using xda premium
LoopDoGG79 said:
Dude, he cannot use Odin, his USB is fried. He needs a FLASHABLE zip of stock ROM.
Sent from JMT Goodness
Click to expand...
Click to collapse
Dude if you look at that thread again there's a flashable zip towards the the top of the OP. It's zedomax's stock flashable zip.
Sent from my SGH-T989 using xda app-developers app
CloudTown3 said:
Dude if you look at that thread again there's a flashable zip towards the the top of the OP. It's zedomax's stock flashable zip.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Been dualy noted. I jumped the gun when I read Odin in the links page. My apologies.
Sent from JMT Goodness
---------- Post added at 02:11 PM ---------- Previous post was at 02:07 PM ----------
KRZ-2pa said:
Ok testing completed, everything works as it should. The ROM zip will update your kernel to stock.
Might need to flash the UVLH1 radio 1st before flashing the stock recovery.
This is how I did it(tested it):
1. install/flash stock ROM 1st.
2. Once installation completed Reboot to custom recovery.
3. install/flash stock recovery.zip.
4. Power off to verified stock recovery.
SGH-T989_UVLH1_Stock_Odex_zipaligned_signed.zip
http://d-h.st/MAT
SGH-T989_UVLH1_Stock_Recovery.zip
http://d-h.st/UwL
Click to expand...
Click to collapse
I'm saving the link to this comment. Never know when you run into the same situation as starskyrob. Plus its pretty convenient :thumbup:
Sent from JMT Goodness
Thank you all for your help. Phone is on its way to Samsung tomorrow. Then expect some paranoid android 2.2 for our beloved t989!
Sent from my SAMSUNG-SGH-T989 using xda premium
Will qbkings video on flashing a costume recovery work on a stock rooted e4gt, Fi27 build. Would I end up using a ff18 custom recovery?
Sent from my SPH-D710 using xda app-developers app
Shader-LXIX said:
Will qbkings video on flashing a costume recovery work on a stock rooted e4gt, Fi27 build. Would I end up using a ff18 custom recovery?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I am assuming yes. As using Odin you just need the right file.
http://forum.xda-developers.com/showthread.php?t=1767421
download the 6.5 .TAR file and follow the video.
put your phone in download mode.
open ODIN, make sure only auto reboot is checked
load .tar file into pda slot.
hook your phone up to the cable. (you'll see a yellow box with COM:xx) means your connected.
press start.
Wait until phone has rebooted. Good to go
Awesome I shall give that a shot after I read a couple more threads.
Sent from my SPH-D710 using xda app-developers app
Shader-LXIX said:
Awesome I shall give that a shot after I read a couple more threads.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Yes make sure you read a lot of stuff here.
Don't know if you've seen this yet but check it out
http://forum.xda-developers.com/showthread.php?t=1525495
g_ding84 said:
Yes make sure you read a lot of stuff here.
Don't know if you've seen this yet but check it out
http://forum.xda-developers.com/showthread.php?t=1525495
Click to expand...
Click to collapse
Yes, I've intstalled the FF18 agat kernal on FI27 many times and works just fine...
atruebmf said:
Yes, I've intstalled the FF18 agat kernal on FI27 many times and works just fine...
Click to expand...
Click to collapse
I would recommend upgrading your kernel to Agat's 6.5 kernel or FI27 kernel repack.
Link: http://forum.xda-developers.com/showthread.php?t=1767421 (agat's custom 6.5 kernel Safe recovery)
Link: http://forum.xda-developers.com/showthread.php?t=1942823 (FI27 stock repack Safe recovery)
Can someone make a step by step video for JB rooting and unlocking the sprint optimus g...Like ZetoMax from High on android's website?
Like I told you in the other thread, we have a flash able zip. No need to do that anymore.
http://forum.xda-developers.com/showthread.php?t=2173532
Sent from my LG-LS970 using xda premium
we have a flash able zip
_Epic said:
Like I told you in the other thread, we have a flash able zip. No need to do that anymore.
http://forum.xda-developers.com/showthread.php?t=2173532
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Like epic says, we have a flashable zip, can't get any easier or better... just make sure you flashed with TWRP and are unlocked
Thanks
_Epic said:
Like I told you in the other thread, we have a flash able zip. No need to do that anymore.
http://forum.xda-developers.com/showthread.php?t=2173532
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Thanks for the swift response...I got all the way up to the update to jellybean and tried to download the update on twrp but it keeps failing..any help for a guy new to this
Wipe system 3 times then cache install the ROM then the radio and reboot. Works like a charm.
Hi
I'm new to android and is kind of confusing to me on how everything works. Right now I have a at&t Galaxy s3 running android version 4.0.4. I've been wanting to upgrade to the latest jelly bean version. I did try upgrading from the software from Samsung Kies but it does not want to work, it does not recognize the phone completely. I am rooted (Kernel version - 3.0.8) and also I have a rom installed (Triune II) that I basically do not remember how I did it. All I want is to find a way to install the latest jelly bean software on my phone. I did search the forums here at XDA developers website but cannot find a way to do it since there is so many roms and software's to choose from and I'm worried about breaking my phone since I do not know exactly which one to download. I don't know how everything with android really works with all the Kernels and all these things. I would appreciate if anyone could help me with this issue. Please!!!
Thanks
Nelson
You didn't search but its OK
You can't upgrade rooted devices via Kies.
If you were able to flash one custom rom you should be able to do it again by simply following directions on a ROMs thread.
Look for your desired ROM (the name and android version is the name of the thread)
And just follow instructions and you should be set
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jayRokk said:
You didn't search but its OK
You can't upgrade rooted devices via Kies.
If you were able to flash one custom rom you should be able to do it again by simply following directions on a ROMs thread.
Look for your desired ROM (the name and android version is the name of the thread)
And just follow instructions and you should be set
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
thanks for the quick reply what my question really is... Can I flash a jelly bean rom for example liquid smooth 4.2.2 on my galaxy s3 running 4.0.4?
Nel-Pagan said:
thanks for the quick reply what my question really is... Can I flash a jelly bean rom for example liquid smooth 4.2.2 on my galaxy s3 running 4.0.4?
Click to expand...
Click to collapse
Yes after you're rooted you can go from 4.0 to 4.2
Make sure your recovery is up to date.
If its not you can find the latest in the ATT Android Development thread
When flashing AOSP based ROMs like Liquid Smooth make sure to follow the instructions and download both ROM and Gapps files and flash them both ( 1st ROM than Gapps) and you should be set.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Nel-Pagan said:
thanks for the quick reply what my question really is... Can I flash a jelly bean rom for example liquid smooth 4.2.2 on my galaxy s3 running 4.0.4?
Click to expand...
Click to collapse
Yes u can bro.Just install custom recovery not twrp.and flash easy .good luck man
Sent from my SGH-I747 using xda app-developers app
leos0000 said:
Yes u can bro.Just install custom recovery not twrp.and flash easy .good luck man
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Please don't give false information
He can flash both TWRP recovery or Clockworkmod.
I strongly recommend TWRP.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jayRokk said:
Yes after you're rooted you can go from 4.0 to 4.2
Make sure your recovery is up to date.
If its not you can find the latest in the ATT Android Development thread
When flashing AOSP based ROMs like Liquid Smooth make sure to follow the instructions and download both ROM and Gapps files and flash them both ( 1st ROM than Gapps) and you should be set.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
How do I find out if my recovery is up to date? Sorry for all this noob questions I just want to make sure I don't brake my device. Also thanks for all the help man I appreciated a lot.
I try twrp more time and i got ****. Cuz on twrp i cant flash jelly 4.2.2 just on cwm i can and im happy
Sent from my SGH-I747 using xda app-developers app
Nel-Pagan said:
How do I find out if my recovery is up to date? Sorry for all this noob questions I just want to make sure I don't brake my device. Also thanks for all the help man I appreciated a lot.
Click to expand...
Click to collapse
Download GooManager from Play and select "Install Recovery Script" And that should do it
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 10:02 PM ---------- Previous post was at 09:59 PM ----------
leos0000 said:
I try twrp more time and i got ****. Cuz on twrp i cant flash jelly 4.2.2 just on cwm i can and im happy
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Like I said don't give it false information.
Just because you failed at using a simple recovery doesn't mean others as well. You're the only person I seen complaining about this. So its clearly you.
TWRP works great and I haven't updated mine in over 7months and I've never had an error flashing.
@Nelson please don't listen to this guy.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jayRokk said:
Download GooManager from Play and select "Install Recovery Script" And that should do it
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 10:02 PM ---------- Previous post was at 09:59 PM ----------
Like I said don't give it false information.
Just because you failed at using a simple recovery doesn't mean others as well. You're the only person I seen complaining about this. So its clearly you.
TWRP works great and I haven't updated mine in over 7months and I've never had an error flashing.
@Nelson please don't listen to this guy.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ok im so sorry man dont be angry im.new too
Sent from my SGH-I747 using xda app-developers app
jayRokk said:
Download GooManager from Play and select "Install Recovery Script" And that should do it
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 10:02 PM ---------- Previous post was at 09:59 PM ----------
Like I said don't give it false information.
Just because you failed at using a simple recovery doesn't mean others as well. You're the only person I seen complaining about this. So its clearly you.
TWRP works great and I haven't updated mine in over 7months and I've never had an error flashing.
@Nelson please don't listen to this guy.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ok I downloaded goomanager now where do I go to install the recovery script? Also what rom do you recommend running jelly bean?
Nel-Pagan said:
Ok I downloaded goomanager now where do I go to install the recovery script? Also what rom do you recommend running jelly bean?
Click to expand...
Click to collapse
Click menu and u gonna see install twrp. And its gonna automatic flashing after look for some rom.but first u need nandroid beckup
Sent from my SGH-I747 using xda app-developers app
Install open recovery
Sent from my SGH-I747 using xda app-developers app
Nel-Pagan said:
Ok I downloaded goomanager now where do I go to install the recovery script? Also what rom do you recommend running jelly bean?
Click to expand...
Click to collapse
Click menu than your option should be there.
I recommend trying them all out!
No ROM will be better than another.
It all comes down to you and the features you want. Read the ROMs description and see what they're packed with.
Watch a YouTube video or read up on how to wipe your cache & delvik, factory reset and all that before flashing so you boot up with out errors.
Its quite easy and fun.
Do not install anything thru GooManager unless you know absolutely what you are doing. Stick to ATT Android Development and ATT Original Android Development ... Do not and I repeat DO NOT FLASH ANYTHING FROM INTERNATIONAL S3 OR ANY OTHER PHONE. YOU WILL BRICK YOUR DEVICE
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
leos0000 said:
Install open recovery
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ok is already installed now I go ahead and download nandroid from the play store?
Nel-Pagan said:
Ok is already installed now I go ahead and download nandroid from the play store?
Click to expand...
Click to collapse
No you nandroid from recovery
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jayRokk said:
Click menu than your option should be there.
I recommend trying them all out!
No ROM will be better than another.
It all comes down to you and the features you want. Read the ROMs description and see what they're packed with.
Watch a YouTube video or read up on how to wipe your cache & delvik, factory reset and all that before flashing so you boot up with out errors.
Its quite easy and fun.
Do not install anything thru GooManager unless you know absolutely what you are doing. Stick to ATT Android Development and ATT Original Android Development ... Do not and I repeat DO NOT FLASH ANYTHING FROM INTERNATIONAL S3 OR ANY OTHER PHONE. YOU WILL BRICK YOUR DEVICE
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Bro you don't know how grateful I am for your help I really appreciate the fact that you took time to explain all this to me. Thanks for everything!:good:
Nel-Pagan said:
Bro you don't know how grateful I am for your help I really appreciate the fact that you took time to explain all this to me. Thanks for everything!:good:
Click to expand...
Click to collapse
No problem!
Get a feel of what you're doing so you're comfortable flashing other stuff like themes/mods/extra features in the future.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jayRokk said:
No problem!
Get a feel of what you're doing so you're comfortable flashing other stuff like themes/mods/extra features in the future.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yea, I will now... after you explain everything now it looks more simpler I did not know for a fact that I could flash a jelly bean rom if I was still on 4.0 now I get the meaning of a rooted device. Also I notice I can download roms thru that app goomanager. After the download is complete for both the rom and gapps I can go ahead and get into recovery and flash them right? Also one last question... nandroid is for me to do a backup? I will find that in recovery mode? How does it really work?
Nel-Pagan said:
Yea, I will now... after you explain everything now it looks more simpler I did not know for a fact that I could flash a jelly bean rom if I was still on 4.0 now I get the meaning of a rooted device. Also I notice I can download roms thru that app goomanager. After the download is complete for both the rom and gapps I can go ahead and get into recovery and flash them right? Also one last question... nandroid is for me to do a backup? I will find that in recovery mode? How does it really work?
Click to expand...
Click to collapse
Yes once they're downloaded flash thru recovery but remember to wipe! And make sure what you have downloaded is absolutely for the US veriant of the S3 or has d2att in the name.
Nandroid will be found in TWRP recovery.
Its just kind of like assurance. If you flash something that boot loops you can revert to your backup.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app