I was curious if the stock cm6 kernel has smartass governor built in it. Also is this the latest kernel source?
can someone please pull the stock kernel and post the.zip. Thanks
bradm23 said:
I was curious if the stock cm6 kernel has smartass governor built in it. Also is this the latest kernel source?
can someone please pull the stock kernel and post the.zip. Thanks
Click to expand...
Click to collapse
This belongs in the Q&A forum
Sorry, but do you happen to know the answer?
Can anyone give a link of a Custom Kernel thread that is working (stable)
I give thanks.
U can make own custom kernel
Sent from my GT-S5360 using XDA
none. all custom kernel in this forum have issue. what features do you want ?
irfanbagus said:
none. all custom kernel in this forum have issue. what features do you want ?
Click to expand...
Click to collapse
best features
you can make a kernel with init.d support by yourself. you can get the full instruction in mikstev's post about droidwall.
kurotsugi said:
you can make a kernel with init.d support by yourself. you can get the full instruction in mikstev's post about droidwall.
Click to expand...
Click to collapse
cool, imma try it.
all i want is a stable kernel with init.d support..
i know, some of you guys may say that i can make that on my own but seriously, i'm not capable of doing that..
dennisaguilajr said:
best features
Click to expand...
Click to collapse
best is very relative. if you need high performance you sacrifice battery life. if you need a lot of features you sacrifice free memory. if you don't know what you want, my advice stick to stock kernel. or just make little modification like kurotsugi says.
@leodasal2
a lot of custom rom have modified boot.img with stock kernel and init.d. you can use that
Hello guys I just want to ask what is the baseband of Creed's Rom v2 I want to install this rom but running latest Rom DXLE1 for my SGY anyone? please?
DDLC2
hitme987 said:
DDLC2
Click to expand...
Click to collapse
Thanks dude. Can i ask something? Merruk Kernel compatible with Creed's Rom v2? and if a2sd Compatible with it? Just want to know!
kevinzareno said:
Hello guys I just want to ask what is the baseband of Creed's Rom v2 I want to install this rom but running latest Rom DXLE1 for my SGY anyone? please?
Click to expand...
Click to collapse
it's based on DXKL2
it's ok to install it over stock rom DXLE1
your baseband will be the same= DXLE1 but your
pda and csc will downgrade to DXKL2
Oops my bad Leo is right I just checked it.
kevinzareno said:
Thanks dude. Can i ask something? Merruk Kernel compatible with Creed's Rom v2? and if a2sd Compatible with it? Just want to know!
Click to expand...
Click to collapse
yes, it is compatible to merruk pre 2.0 kernel
just don't use the ext4.zip
kevinzareno said:
Thanks dude. Can i ask something? Merruk Kernel compatible with Creed's Rom v2? and if a2sd Compatible with it? Just want to know!
Click to expand...
Click to collapse
Both a2sd and merruk kernel is compatible. You need to the a2sd darktremor.zip for the a2sd to work though.
hitme987 said:
Oops my bad Leo is right I just checked it.
Click to expand...
Click to collapse
off topic:
bro, what gov do you use?? that's uses all freqs..
performance:battery
ratio 60:40
any suggestions?? :highfive:
leodasal2 said:
off topic:
bro, what gov do you use?? that's uses all freqs..
performance:battery
ratio 60:40
any suggestions?? :highfive:
Click to expand...
Click to collapse
Offtopic:
Smartass v2 uses 2-3 frequencies and decreases/increases freq as per the load. It is the best performance with max power saving gov. It has quite good results in benchmarks in xda. Ondemand and interactivex are some others. Refer these threads, they are quite informative: (first ones enough)
http://forum.xda-developers.com/showthread.php?t=1555744
http://forum.xda-developers.com/showthread.php?t=1369817
A quote from the 1st thread.
Code:
#3 - The most power saving governor is Ondemand. If you need a high performance governor, use smartassV2, which offers some battery savings.
hitme987 said:
Offtopic:
Smartass v2 uses 2-3 frequencies and decreases/increases freq as per the load. It is the best performance with max power saving gov. It has quite good results in benchmarks in xda. Ondemand and interactivex are some others. Refer these threads, they are quite informative: (first ones enough)
http://forum.xda-developers.com/showthread.php?t=1555744
http://forum.xda-developers.com/showthread.php?t=1369817
A quote from the 1st thread.
Code:
#3 - The most power saving governor is Ondemand. If you need a high performance governor, use smartassV2, which offers some battery savings.
Click to expand...
Click to collapse
i'm using smartassV2..
thanks for the confirmation :good:
Which Kernel For You Is the Best? In terms of Speed,Stability,Efficiency,..etc?:good:
MERRUK VS White VS Savie VS Repencis
Click to expand...
Click to collapse
Poll Added​
SAVIE REV 60 V2 FTW! It has a inbuilt CWM too. Performance is very good. A bit harsh on battery but under clocking solves that and it can play angry birds space some what smooth in even 312-432 smartass v2
Btw, I tried all kernels and its the best imo.
Hmm..This would be appropriate in general section rather than in Q & A?
hitme987 said:
SAVIE REV 60 V2 FTW! It has a inbuilt CWM too. Performance is very good. A bit harsh on battery but under clocking solves that and it can play angry birds space some what smooth in even 312-432 smartass v2
Btw, I tried all kernels and its the best imo.
Hmm..This would be appropriate in general section rather than in Q & A?
Click to expand...
Click to collapse
i will try savie..BTW is CWM stable? and is it working?(backup, restore, flash?)
a link for the rev 60?
i will try to ask mods to move this to general:highfive:
ronnieryan said:
i will try savie..BTW is CWM stable? and is it working?(backup, restore, flash?)
a link for the rev 60?
i will try to ask mods to move this to general:highfive:
Click to expand...
Click to collapse
CWM is stable only on custom ROMs (no probs restoring/backuping etc). Stock ROMs backup/restore is bugged up. And you need to mount system everytime you flash any zip(in custom ROMs too). Savie is fixing these and so didnt release it officially. I have the test version along with some of the other testers. But the rest, its completely stable.
Features include swap compatible, ext4 auto mount, init.d support , droidwall support, some battery tweak, 4 freq , 18 gov, 7 i/o , busybox included and many more. PM me or savie for the link as its still a test release
hitme987 said:
CWM is stable only on custom ROMs (no probs restoring/backuping etc). Stock ROMs backup/restore is bugged up. And you need to mount system everytime you flash any zip(in custom ROMs too). Savie is fixing these and so didnt release it officially. I have the test version along with some of the other testers. But the rest, its completely stable.
Features include swap compatible, ext4 auto mount, init.d support , droidwall support, some battery tweak, 4 freq , 18 gov, 7 i/o , busybox included and many more. PM me or savie for the link as its still a test release
Click to expand...
Click to collapse
cool, i will try it out later
for others, what can you say about merruk and white?:good:
hey can i have a link of savie's latest kernel too? ? ? been on the one that came along with EVO X rom
ronnieryan said:
Which Kernel For You Is the Best? In terms of Speed,Stability,Efficiency,..etc?:good:
Poll Added​
Click to expand...
Click to collapse
Good thread i too have that dbt abt which one is the best.
Btw u could add repencis kernel too.a suggestion
yeah add repencis kernel fedy
Where is. Savie kernel v60. Link please. I have 54
sent from galaxy Y did i buy this crappy phone
jaison thomas said:
Good thread i too have that dbt abt which one is the best.
Btw u could add repencis kernel too.a suggestion
Click to expand...
Click to collapse
ok, i forgot about that
thirdzcee said:
hey can i have a link of savie's latest kernel too? ? ? been on the one that came along with EVO X rom
Click to expand...
Click to collapse
yabyuh22 said:
yeah add repencis kernel fedy
Click to expand...
Click to collapse
Heartlessangel2001 said:
Where is. Savie kernel v60. Link please. I have 54
sent from galaxy Y did i buy this crappy phone
Click to expand...
Click to collapse
you may ask kurotsugi or savie himself for the link, since he has sent the links out via PM for official testing, its not yet officially out
hitme987 said:
CWM is stable only on custom ROMs (no probs restoring/backuping etc). Stock ROMs backup/restore is bugged up. And you need to mount system everytime you flash any zip(in custom ROMs too). Savie is fixing these and so didnt release it officially. I have the test version along with some of the other testers. But the rest, its completely stable.
Features include swap compatible, ext4 auto mount, init.d support , droidwall support, some battery tweak, 4 freq , 18 gov, 7 i/o , busybox included and many more. PM me or savie for the link as its still a test release
Click to expand...
Click to collapse
can you give us link for savie kernel #60 rev2
waiting for merruk final kernel
a link with kernel threads will be fine... thx
off topic
hitme- didnt savie told you not to discuss that on public since it is under development??? well it is what he said to me...
by the way im using savie's latest test kernel and rep v3.5 kernel+modules+tweaks
devion14 said:
off topic
hitme- didnt savie told you not to discuss that on public since it is under development??? well it is what he said to me...
by the way im using savie's latest test kernel and rep v3.5 kernel+modules+tweaks
Click to expand...
Click to collapse
well, he told me not to publicly share the link as it is still on beta
but i guess praising his kernel publicly wouldn't hurt :highfive:
ps: waiting for merruk final kernel :fingers-crossed:
i also got savie New kernel rev 60 1hour ago. he did not have any problems. the kernel's cwm is great. i wanted New governors like lutzactice and intildemand
sent from galaxy Y did i buy this crappy phone
yeah right...anyway its real kernel war...hehe...by the way repencis isnt included in the poll?
has any one tried repencis 3.5 kernel+modules+tweaks of repencis v3.5 rom?
devion14 said:
yeah right...anyway its real kernel war...hehe...by the way repencis isnt included in the poll?
has any one tried repencis 3.5 kernel+modules+tweaks of repencis v3.5 rom?
Click to expand...
Click to collapse
it will be included..it slipped my mind in making poll, so im asking mike to add repencis..just wait
Now I use repencis kernel with repencis 3.5.This kernel are good,but merruk kernel was first custom kernel with a lot of features for sgy.I dont tried savie and white kernel but for me merruk kernel was the best kernel and when will be updated I use it again
Hi everybody, is there a Kernel compatible with this rom with more governor and tweaks? Could be another 4.1.2 jernel Like Trinity compatile with it? ###(Wrong version in title it's 2.4)###
megamarini said:
Hi everybody, is there a Kernel compatible with this rom with more governor and tweaks? Could be another 4.1.2 jernel Like Trinity compatile with it? ###(Wrong version in title it's 2.4)###
Click to expand...
Click to collapse
Why you need to change governor?
But try different kernel, like franco.kernel
Should work with it. But the ROM works fine with his own
Dodofant said:
Why you need to change governor?
But try different kernel, like franco.kernel
Should work with it. But the ROM works fine with his own
Click to expand...
Click to collapse
Hi mate, where i can find it? i haven't seen it in forum....