Related
Hey guys, so I was installing Chainfire 3D last night and on the reboot my phone got stuck at the Note 2 logo and wont go any further.
I've tried a full wipe from CWM and no dice!
I need your help to fix this asap as I have no internet at home and am in an internet cafe at the moment trying to fix this
Chainfire 3D won't work on jellybean....
Your only options are as follows:
1) boot to recovery and restore a nandroid assuming you took one?
2) flash a rom with ODIN (not sure if any of the custom roms can be odin flashed?)
3) wipe and flash a rom with recovery
4) use KIES to save and restore your device.
Lennyuk said:
Chainfire 3D won't work on jellybean....
Your only options are as follows:
1) boot to recovery and restore a nandroid assuming you took one?
2) flash a rom with ODIN (not sure if any of the custom roms can be odin flashed?)
3) wipe and flash a rom with recovery
4) use KIES to save and restore your device.
Click to expand...
Click to collapse
FFFFFFFFFFUUUUUUUUUUUUUUU
Oh well, I knew I should have done a nandroid.
Am downloading ALIE at the moment. Lets hope it works! Thanks man.
agentdark45 said:
FFFFFFFFFFUUUUUUUUUUUUUUU
Oh well, I knew I should have done a nandroid.
Am downloading ALIE at the moment. Lets hope it works! Thanks man.
Click to expand...
Click to collapse
Where are you downloading the stock rom from? its not on sammobile?
Lennyuk said:
Where are you downloading the stock rom from? its not on sammobile?
Click to expand...
Click to collapse
Not complete stock, but close enough: http://forum.xda-developers.com/showthread.php?t=1915386 (odex version)
Hay man im waiting to confirm if your note is back alive !!!!!
His note will be fine, using CF3D just causes a bootloop, a wipe and reflash always fixes it.
Hey all, as Lenny said everything is working fine over here after flashing the ROM through ODIN - it's back from the dead!
Thanks to all at XDA for saving my precious Note 2
Would this be consider a 1st soft brick on the GN2? Congratz is in order?
My Note 2 got stuck on the boot screen. After the Samsung animation goes away and only the SAMSUNG word appears nothing happens. The SAMSUNG word only changes it's brightness and that is it.... The problem is I have many tasks saved in the S Planner and since those tasks are not synced to any server doing a factory reset isn't the best option because I will lose all my tasks and there are some task due to 03/2013... I can't remember them all :crying:
Hello all just bought a new Samsung Galaxy SII from craigslist already rooted with 4.0.3 Jedi Mind Trick. After reading for what seems 4-5 hours i have been trying to put together how to properly without bricking switching it to 10.0.0 Stable as i use to use Cyanogenmod 2-3 years ago on my devices. Seem alot of things have changed and there is a cluster**** of stuff out there now. If you could direct me to a how to or show me how to do it i would greatly appreciate it!
Thanks all!
Assuming you have nothing personal to back up that you can't just download from google play or your google account again: download cyanogen 10 and it's gapps. reboot into recovery mode. factory reset, wipe data, wipe system, wipe cache, wipe dalvik. pick the install zip from sd card or so option, browse to cyanogen, then install gapps the same way. wipe dalvik again and reboot.
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Alawishis said:
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Click to expand...
Click to collapse
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
new ion? said:
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
Click to expand...
Click to collapse
trying to look up how to do that now .... Searching the forum now... Might you be able to tell me real quick how? I already Downloaded the 5.2 file they suggest to use but can't find a working toturial that is just for flashing the cwm.
melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
arcsine said:
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
Click to expand...
Click to collapse
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
melvinator said:
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
Click to expand...
Click to collapse
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
new ion? said:
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
Go back, format system, and then reinstall.
Sent from my SAMSUNG-SGH-T989 using xda premium
Update your recovery to twrp or cwm 6+ and don't use dark side scripts
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Please excuse my harshness but this is not as hard as many make it seem. I would say if it takes you more than a couple attempts maybe it is just not for you. I only say this because I would hate to see you mess up your phone. Now if you think a bootloop is a brick then we need to do things at a slower pace with you.
If you already have your phone rooted then
1.download goomanager from the playstore and then
2.open it up and allow it to grant permission from CM
3.hit menu button while goo manager is open
4.click on install OpenRecoveryScript
5.let it do its thing
6.reboot into your new TWRP recovery
7.Wipe/Data Factory Reset
8.Flash Rom
9.Flash Gapps
10.Reboot
You can throw in a backup of files somewhere in there if you like.... Your choice
melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
I had a bootloop when using CWM v6.0.1.5. So a friend of mine told me he had success with CWM v6.0.1.5 Touch. So I switched to the touch recovery and... SUCCESS.
Here's the link to CWM touch and non-touch:
http://forum.xda-developers.com/showthread.php?t=1893464
A boot loop could mean a bad download or bad flash but it is most definitely NOT a bricked device. All you needed to do was get a fresh download and move it to your SD card by mounting it in recovery. Then, wipe EVERYTHING but the SD. EVERYTHING. Then flash the ROM, Gapps and whatever radio. I go from CM to AOKP to other random TW roms all the time and never have issues.
The 2 best recoveries are twrp or my favorite because I'm used to it is cwm 6.0.1.5. http://forum.xda-developers.com/showthread.php?t=1844637
Also if your phone boot loops don't freak out' just either reboot to see if that works out first and if not reboot into recovery. Also with these new recoveries do not use dark side scripts.
Factory reset
Format system
Format cache
Format data
Flash ROM
Flash gapps
Reboot and enjoy
Sent from my SAMSUNG-SGH-T989 using xda premium
This did it!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Sorry for the necro on the thread, but I didn't want it to be stated I didn't look around some either.
I am going from JMT to CM and want to make sure it's as seamless as possible. I use CWM and usually usually use darkside complete wipes, but I read in a previous post not to use darkside. Is there a reason for this? I can't see why this wouldn't work as it's just a wipe.
Also I use Titanium Backup. Is it possible to backup my apps and data and restore them since its not TW any longer? I want to be able to restore as much of my data as possible and make sure I don't lose it.
P.S. - If thread necroing is not appreciated, I apologize.
Hi i've come here many times before for any hiccups that came up for me with my phone but this time I believe I need help. I'll start it off with me earlier this week I was running CyanogenMod 10.1 and felt like I wanted to change it up leading me to isntall synergy onto my S3 (completed two nights ago). Today I decided it just wasnt doing it for me. Picked a new ROM ( Paranoid ).
This is where the problem comes in, I started the usual to flash a new ROM, put it into recovery and then started the factory/data reset. it froze waited half an hour for it to complete but it did'nt. Rebooted it into recovery as now I cant boot back into the software anyways. tried the same thing but wiped the cache and dalvik cache first. same thing happened froze on the factory reset. At this time I decided to reset it completley and get rid of the root, flashing the stock firmware. Odin also froze everytime, I cant even reinstall the stock firmware after failing everytime around the Nand area. I found this thread (http://forum.xda-developers.com/showthread.php?t=1840030) with I think a similar problem im really not sure as I cant do anything but the thing is, is that its for Verizon Galaxy S3 ( im on Rogers Canada). I'm sure I can fix this somehow as I can put it into download mode still but any help from the community would be greatly appreciated.
How far does Odin get during the stock ROM flash, before it freezes up on you?
I would try to Odin a stock recovery. Not the ROM & everything, just the recovery. Then go into the stock recovery and wipe everything.
Then Odin the stock ROM. Maybe try an ICS one if you were failing on the JB one.
CZ Eddie said:
How far does Odin get during the stock ROM flash, before it freezes up on you?
I would try to Odin a stock recovery. Not the ROM & everything, just the recovery. Then go into the stock recovery and wipe everything.
Then Odin the stock ROM. Maybe try an ICS one if you were failing on the JB one.
Click to expand...
Click to collapse
It says Nand write start, and then complete (write) operation failed. On the phone in download mode it says Secure check Fail : aboot . CMW works for me still ? is that what you mean ? if so the data/factory reset freezes. I do have a RecoveryGalaxyS3USCanada.tar file in my Root folder, if I should flash that.... but its been so long I forget what its for. Thank you for the feedback ive been searching all day and wasnt able to find anything useful so far. Right now im downloading older stock firmwares to attempt to flash them, hopefully they pan out.
The utility in this thread offers an option to flash the stock recovery. I'd try it out and see what happens!
http://forum.xda-developers.com/showthread.php?t=1746665
Flash stock recovery and then boot to the stock recovery and restore to defaults. Then flash a stock ROM.
Stock recovery = Samsung recovery, not TWRP or Clockwork.
I had 2 soft bricks with cm this week. Had to Odin back to rooted stock for one. The other back to rooted stock and had to factory reset with Samsun 3e recovery before the phone would boot.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Okay i've installed everything (drivers, toolkit, deleted Kies) and now when im going in to flash the stock recovery it says its waiting for USB debugging, which I can't re-anable since im stuck in a boot loop. Am I screwed here ?
French1747 said:
Okay i've installed everything (drivers, toolkit, deleted Kies) and now when im going in to flash the stock recovery it says its waiting for USB debugging, which I can't re-anable since im stuck in a boot loop. Am I screwed here ?
Click to expand...
Click to collapse
can you still access recovery? i'm assuming it's twrp or cwm
if so, here's cwm flashable stock firmware from upndwn4par. flash it, boot in, turn on debugging.
http://d-h.st/8OQ
xBeerdroiDx said:
can you still access recovery? i'm assuming it's twrp or cwm
if so, here's cwm flashable stock firmware from upndwn4par. flash it, boot in, turn on debugging.
]
Click to expand...
Click to collapse
Thank you so much! I doubted it at first just because of the other roms and stock ones also never worked but this one has it up and running smoothy. I want to play it safe just so I dont screw up again so I'm gonna ask you guys one more thing.. Would it be safe to try and flash the Paranoid ROM now? ( I dont believe it was the problem earlier since I never actually got to installing it). The problem was something around the lines of not being able to write things onto the device. ex Data/Factory reset freezing everytime on CMW, while Odin also failed everytime it made to the step of flashing/writing in the stock ROM.
Thanks everyone, your're all very helpful !
If it were me, I'd Odin a stock/rooted JellyBean ROM first. Just to get to get all the correct files & structure on there. THEN I would flash whatever you want.
First, sorrt to speak french, but thatnll be more easy for me to tell it.
A partir du moment ou tu peux passer en mode download, tout va bien ^_^
Il m'est deja arrive sur mon teos de corrompre ma partition systeme et de repartir comme si de rien n'etait avec un flash.
Reflashe avec odin et reessaie
Sent with my AiKi and optimus rom
CZ Eddie said:
If it were me, I'd Odin a stock/rooted JellyBean ROM first. Just to get to get all the correct files & structure on there. THEN I would flash whatever you want.
Click to expand...
Click to collapse
French1747 said:
Thank you so much! I doubted it at first just because of the other roms and stock ones also never worked but this one has it up and running smoothy. I want to play it safe just so I dont screw up again so I'm gonna ask you guys one more thing.. Would it be safe to try and flash the Paranoid ROM now? ( I dont believe it was the problem earlier since I never actually got to installing it). The problem was something around the lines of not being able to write things onto the device. ex Data/Factory reset freezing everytime on CMW, while Odin also failed everytime it made to the step of flashing/writing in the stock ROM.
Thanks everyone, your're all very helpful !
Click to expand...
Click to collapse
i agree with coming from stock firmware when flashing. i would also make sure my cwm was up-to-date while i was at it. i would also boot into recovery and make a nandroid now so you'll have one. with that being said, here ya go:
http://forum.xda-developers.com/showthread.php?t=2179330
in the above link:
step 1: take the time to backup your imei if you havent already
step 2: this is stock with root already injected
step 3: if you dont have rom manager, download it and update your recovery if you're not running 6.0.2.3 or higher
step 4 & 5 are self explanatory
cheers
xBeerdroiDx said:
i agree with coming from stock firmware when flashing. i would also make sure my cwm was up-to-date while i was at it. i would also boot into recovery and make a nandroid now so you'll have one. with that being said, here ya go:
http://forum.xda-developers.com/showthread.php?t=2179330
in the above link:
step 1: take the time to backup your imei if you havent already
step 2: this is stock with root already injected
step 3: if you dont have rom manager, download it and update your recovery if you're not running 6.0.2.3 or higher
step 4 & 5 are self explanatory
cheers
Click to expand...
Click to collapse
The only thing so far (that I have noticed) is that the data/factory reset still does not work, I'm going to continue like you said earlier and flash stock recovery and my own stock firmware for Rogers now that I have turned debugging mode on. my cmw currently is 6.+ and my previous Nandroid backups would also get stuck when I tried to restore to them, I'm assuming that since I still can't factory reset that I wont be able to restore back to them but I will see. Should I make another nandroid even when its still in a semi-messed up state ?
Right now I seriously just want to get rid of the stupid data reset problem.
French1747 said:
The only thing so far (that I have noticed) is that the data/factory reset still does not work, I'm going to continue like you said earlier and flash stock recovery and my own stock firmware for Rogers now that I have turned debugging mode on. my cmw currently is 6.+ and my previous Nandroid backups would also get stuck when I tried to restore to them, I'm assuming that since I still can't factory reset that I wont be able to restore back to them but I will see. Should I make another nandroid even when its still in a semi-messed up state ?
Right now I seriously just want to go back to step one of everything, unrooted stock fimrware with access to Gapps and continue from there. Most of all get rid of the stupid data reset problem.
Click to expand...
Click to collapse
where are you saying the data/factory reset isnt working? cwm or in android settings?
i would download rom manager and update cwm to latest (6.0.3.0), boot into cwm recovery and try making a nandroid.
and i dont think you're as messed up as you think you are right now. you're rooted, with stock firmware and a custom recovery.
when i was ready, i would update recovery, in recovery make a backup, (still in recovery) wipe data/factory reset, wipe cache/dalvik, flash rom
xBeerdroiDx said:
where are you saying the data/factory reset isnt working? cwm or in android settings?
i would download rom manager and update cwm to latest (6.0.3.0), boot into cwm recovery and try making a nandroid.
and i dont think you're as messed up as you think you are right now. you're rooted, with stock firmware and a custom recovery.
when i was ready, i would update recovery, in recovery make a backup, (still in recovery) wipe data/factory reset, wipe cache/dalvik, flash rom
Click to expand...
Click to collapse
Google apps arent showing up for me either, Tried installing them and they did succesfully but i still dont see them. anyways I'm on a slightly lower version of cmw then 6.0.3.0 , can I flash the new version over the current one im on, since I cant install through the play store ?
French1747 said:
Google apps arent showing up for me either, Tried installing them and they did succesfully but i still dont see them. anyways I'm on a slightly lower version of cmw then 6.0.3.0 , can I flash the new version over the current one im on, since I cant install through the play store ?
Click to expand...
Click to collapse
boot into cwm and flash gapps again. flash twice to be sure. reboot. lemme know
I believe everything is working perfectly now, installed Rom manager from the web and updated cmw. Once more tried to data wipe from cmw and it froze again this time crashing by itself, I then went back into it went and formatted my data and then tried the wipe data, this time it worked for me and I proceeded to wipe the cach and dalvik, installed paranoid and everthing is working fine, ill post an update if i notice anything else happens but so far it looks perfect. Thank you so aton, I appreciate it guys especially you "Beer". Now I can relax on my birthday and stop tinkering around on my phone haha.
( Not sure why Gapps wer'nt working earlie,r but i'm done )
Same problem here
The same thing happened to me while trying to Odin to ATT stock rom. Flash stopped half way and Odin showed failed. Tried to reboot into download mode to repeat procedure and would not go into download mode. Phone will reboot but into android recovery mode. When I try to run an update from sd card I get a "file verification error" and the process aborts. I'm going to try this process to see if I have any better results.
I installed paranoidandroid 3.96a today and I had some errors before I was able to install it so I ended up formatting the data and then clearing the caches.
I flashed PA. Then I flashed the latest google apps. Then I flashed PA again and rebooted. My phone loaded fine and I was able to install everything I want.
Then if I reboot my phone it get stuck on the splash screen and cannot load. If I go into TWRP 2.5.0.0 recovery it asks me for a password (I have not yet a password although I recently bought this phone used on swappa so I've contacted the seller to ask if he set a password). If I push cancel at the password screen then I can get into TWRP but if I go to wipe the dalvik cache it say sit "failed." The test printed to the console is:
Updating partition details...
E: Failed to wipe dalvik
Updating partition details...
I also cannot browse the internal memory of my phone. There is no folder named "android" or similar.
Any thoughts would be greatly appreciated. I'm going to try to update TWRP to the latest version. After that I'm out of ideas
Try the latest twrp like you said. Then you can also try cwm. Before you csn browse your file system in recovery, you have to mount system.
Id try another factory reset and reboot though. If thst doesnt help try another kernel. If youre still stuck, idin flash back to full stock with the root66 firmware, then start over clean from there.
Sent from my SGH-T999 using xda premium
how long do you let the phone sit after rebooting? I'm currently on the same rom and noticed it takes longer than usual to reboot the device. it's seems like it takes just as long to reboot the phone as it does to boot up the phone right after flashing the rom.
try letting the phone sit for 5-10 mins and see if it boots up. it's kind of ridiculous it takes that long to reboot a phone, but then again the rom is in alpha. I might try reflashing the rom to see if this still happens.
Just posted in the ROM thread to see if anyone else has the same issue.
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Try the latest twrp like you said. Then you can also try cwm. Before you csn browse your file system in recovery, you have to mount system.
Id try another factory reset and reboot though. If thst doesnt help try another kernel. If youre still stuck, idin flash back to full stock with the root66 firmware, then start over clean from there.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I tried installing PA again and then upgrading TWRP to 2.6.0.0 but it still said that it had 2.5.0.0. Then I installed CM10.1 and used that to upgrade to TWRP 2.6.0.0 which worked. I then tried installing PA3.96a again with the same results.
I think that the problem is with TWRP not recognizing android 4.3 installs correctly because I have the same problem with CM10.2 that I had with PA3.96a.
I don't think the problem is that I'm not waiting long enough because after the first restart (i.e. I flash it and restart loading the ROM fine--then when I restart it for the first time it gets stuck). When I go into TWRP after it hangs the first thing it does is ask me for my password. I don't have a password. I think that something is happening to the system partition after install that makes TWRP unable to read it on this phone. Also it says that 0 MB have been used on my phone ram so I think the problem is with TWRP not being able to read the system partition in 4.3 correctly.
Has anyone gotten android 4.3 working on the t-mobile s3 yet?
Edit: And I can't restore from a nandroid backup (unless I put it on my SD card because the phone cannot read from the system partition).
Did you try mounting /system in recovery?
I would seriously consider Odin flashing stock root66 firmware before anything else at this point. Maybe something is corrupted in one of the underlying partitions.
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Did you try mounting /system in recovery?
I would seriously consider Odin flashing stock root66 firmware before anything else at this point. Maybe something is corrupted in one of the underlying partitions.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes I did. If I mount it I still couldn't see /android or any other folders. I could also not clear the dalvik cache or do a factory reset.
Okay that's the consensus. I'll try restoring to stock sometime this weekend and see how that goes.
I just reverted back to stock using Odin. Reset the counter to be safe and then used odin to load a rooted stock. Then I installed goo manager and had it install TWRP 2.6.0.0.
Success! I can install and 4.3. Something must have been funky with the previous rooting job or something. Who knows. Thanks!
Right on! Good to hear you got it running good!
Sent from my SGH-T999 using xda premium
same thing
so i basically have the same thing but with mine i installed hyperdrive rom and flashing the stock rom like you said doesnt work and doesnt get rid of hyperdrive so it just has the hyperdrive boot screen and i cant get to my internal memory ect. like him please help i cant have ruined my phone by the way im a noob so please be specific and give me links thanks
Did you install stock with Odin?
I installed stock with Odin. I then installed a rooted stock and used that to reroot my phone by installing goo manager to install twrp 2.6.0.0.
Let me know if you want me to get the links for you. I got them on xda from googling
Edit: Found it. I used this http://forum.xda-developers.com/showthread.php?t=1900345.
Downloading the stock took about an hour so I would go ahead and just use odin to install the rooted stock. After you install your phone will reboot and then it will hang on a screen with Samsung on it (or at least it did for me). You then restart your phone and go into recovery and do a factory reset. Then install goo manager and reinstall the recovery by clicking on the options/settings button and selecting "Install OpenRecoveryScript." Then you can download whatever ROM you want to install. Reboot and go into recovery and you can install it.
Sent from my SGH-T999 using xda app-developers app
links please
bmdubs said:
Did you install stock with Odin?
I installed stock with Odin. I then installed a rooted stock and used that to reroot my phone by installing goo manager to install twrp 2.6.0.0.
Let me know if you want me to get the links for you. I got them on xda from googling
Edit: Found it. I used this http://forum.xda-developers.com/showthread.php?t=1900345.
Downloading the stock took about an hour so I would go ahead and just use odin to install the rooted stock. After you install your phone will reboot and then it will hang on a screen with Samsung on it (or at least it did for me). You then restart your phone and go into recovery and do a factory reset. Then install goo manager and reinstall the recovery by clicking on the options/settings button and selecting "Install OpenRecoveryScript." Then you can download whatever ROM you want to install. Reboot and go into recovery and you can install it.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
that would be awesome if you could i want to make sure i do the same downloads as you its so nice knowing im not the only one. im so screwed if i cant fix this
imfukked said:
that would be awesome if you could i want to make sure i do the same downloads as you its so nice knowing im not the only one. im so screwed if i cant fix this
Click to expand...
Click to collapse
Check your flash counter and if it's anything over 0 run Triangle Away to set it back to 0.
Then follow the directions in the stickied thread for directions on how to revert back to stock. I installed the latest t-mobile ROM from this thread http://forum.xda-developers.com/showthread.php?t=1771687
Just make sure you get the T-mobile versions
bmdubs said:
Check your flash counter and if it's anything over 0 run Triangle Away to set it back to 0.
Then follow the directions in the stickied thread for directions on how to revert back to stock. I installed the latest t-mobile ROM from this thread http://forum.xda-developers.com/showthread.php?t=1771687
Just make sure you get the T-mobile versions
Click to expand...
Click to collapse
Triangle Away only after you have stock kernel and stock recovery back on your phone. Otherwise it wont do you any good.
Odin flash the root66 firmware, triangle away, then full unroot from the supersu app.
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Triangle Away only after you have stock kernel and stock recovery back on your phone. Otherwise it wont do you any good.
Odin flash the root66 firmware, triangle away, then full unroot from the supersu app.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
how do i check my triangle and triangle away it ohh and my odin doesnt have pda it has bl ap cp csc
imfukked said:
how do i check my triangle and triangle away it ohh and my odin doesnt have pda it has bl ap cp csc
Click to expand...
Click to collapse
Reboot your phone and instead of pushing volume up to put it into recovery mode push volume down to bring it into download mode. This is also what you use to revert to stock via odin.
IT WORKED
HOLY **** IT WORKED I HAVENT HAD MY PHONE FOR A WEEK I THOUGHT I WAS SOO SCREWED YOU SAVED MY ASS THANK YOU SOOOOOOO MUCH!!!!!!!:laugh::laugh::laugh::laugh:
My understanding is that it's actually kind for of hard to brick your phone from doing software modifications. It is possible but I think only if you really screw something up. Like powering down while installing a recovery or something.
Sent from my SGH-T999 using xda app-developers app
Unplugging in the midst of a firmware flash, and flashing the wrong models firmware are the easiest ways people hard brick.
If you can get download mode and recovery to boot it can be fixed most of the time.
Sent from my SGH-T999 using xda premium
Yeah what happened with me is I downloaded hyperdrive to my internal and this was my first time and I didn't install cwm or anything like that so I did the factory reset and cleared cashe but then I relized there's no way to clear your dalvik and or launch hyperdrive so I tryed booting my phone and it got stuck on the samsung logo everytime so I used odin to put cwm on my phone and I couldn't access my internal or clear dalvik so I used an external and used my old galaxy s2 to download hyperdrive on to the external and then launched it on my s3 and it installed great it let me choose everything but when I went to launch the phone it got stuck on the hyperdrive boot animation so I tryed like 10 stock roms none of them worked it wouldn't get rid of the hyperdrive boot animation iether so then I was sher the link you gave me wasn't going to work but unlike the other odin ones I did it took time instead of only taking half a second and it worked
Sent from my SGH-T999 using xda app-developers app
Hello,
I can not flash any ROM to my GT-P5210 Tab anymore.
I was on BinDroid ONE P5210 LITE V3.0.0, but since it is discontinued
and 2 other ROMs rolled out over the past days I wanted to give it a try.
- went back to stock with official firmware from "sammobile" for my device,
- flashed TWRP with Odin 3.07
- flashed ROOT with Odin
- went to recovery did factory reset + dalvik/cache (
- flashed new ROM (neither ROM Pimpdroid or Grievous is working)
after flashing Tab goes into a bootloop to recovery. First boot after flash takes some time in the Galaxy Tab3 Logo but in the end it reboots into TWRP. I have tried CWM too with the same results.
I am not totaly new to flashing, did it with my I9000 and now with my I9300 int. but with this Tab3 now I am lost.
Any ideas are much appreciated.
regards and sorry for my english its not my native tongue
zerodv8 said:
Hello,
I can not flash any ROM to my GT-P5210 Tab anymore.
I was on BinDroid ONE P5210 LITE V3.0.0, but since it is discontinued
and 2 other ROMs rolled out over the past days I wanted to give it a try.
- went back to stock with official firmware from "sammobile" for my device,
- flashed TWRP with Odin 3.07
- flashed ROOT with Odin
- went to recovery did factory reset + dalvik/cache (
- flashed new ROM (neither ROM Pimpdroid or Grievous is working)
after flashing Tab goes into a bootloop to recovery. First boot after flash takes some time in the Galaxy Tab3 Logo but in the end it reboots into TWRP. I have tried CWM too with the same results.
I am not totaly new to flashing, did it with my I9000 and now with my I9300 int. but with this Tab3 now I am lost.
Any ideas are much appreciated.
regards and sorry for my english its not my native tongue
Click to expand...
Click to collapse
did u try root check app to c if u r truly rooted? is ur su updated? if so try reflashing the recovery...n the root file. do u have the stock kernel?
THink I Got a fix
This worked for me. The TWRP does NOT actually wipe anything. go to settings in whatever rom you are running, and do a factory data reset from there. Let it wipe all app data and EVERYTHING. Then go through the steps to install whichever ROM you want. It worked for me!! Post back and let me know if it worked for you too. I tried for 3 days to install anything, and this is the only thing that worked.:victory:
Tquarter said:
This worked for me. The TWRP does NOT actually wipe anything. go to settings in whatever rom you are running, and do a factory data reset from there. Let it wipe all app data and EVERYTHING. Then go through the steps to install whichever ROM you want. It worked for me!! Post back and let me know if it worked for you too. I tried for 3 days to install anything, and this is the only thing that worked.:victory:
Click to expand...
Click to collapse
ok did read your post before trying to flash. i lost my back up and as well as my emmc. so i need a stock firmware only problem I now have is downloading one. Three quarter of links r dead and the three i have tried have had errors. Can you help me anyone with a google drive or box download of an unknown region stock firmware so I can breathe light in t o my brick please
https://db.tt/63atdfRZ Here ya go!
I'm uploading a stock firmware that can be flashed using ODEN. I have not tried this file, I just downloaded it, before I flashed anything, in case something went wrong. I'll post the link when it finishes uploading. Good luck! Post back and let us know how it went.
solved
Tquarter said:
This worked for me. The TWRP does NOT actually wipe anything. go to settings in whatever rom you are running, and do a factory data reset from there. Let it wipe all app data and EVERYTHING. Then go through the steps to install whichever ROM you want. It worked for me!! Post back and let me know if it worked for you too. I tried for 3 days to install anything, and this is the only thing that worked.:victory:
Click to expand...
Click to collapse
I tried your method and it worked. Another thing that works is first thing when you enter TWRP check if system is mounted, if not tick mount and then wipe the way installation of the rom suggests. This worked for me too. Thanks for ur time and the fish
Oh cool, I'm glad to help. I also tried to manually mount system, but untill I got that first ROM installed, it just un-mounted itself again. I hope these problems will be sorted out. Both recoveries act choked down somehow. (TERP, CWM) Looks like "source manifest CM 10.2 "thread is making exciting progress. I can't stop watching it. Most of it is over my head, but google helps me, in trying to grasp what they are saying.
Tquarter said:
Oh cool, I'm glad to help. I also tried to manually mount system, but untill I got that first ROM installed, it just un-mounted itself again. I hope these problems will be sorted out. Both recoveries act choked down somehow. (TERP, CWM) Looks like "source manifest CM 10.2 "thread is making exciting progress. I can't stop watching it. Most of it is over my head, but google helps me, in trying to grasp what they are saying.
Click to expand...
Click to collapse
can someone recommend a clean rom for gt-p5210