First off, I am a hearing impaired guy. I hardly tried to learn and understand about root to device(my Samsung Galaxy S3). So, how I supposed to install ClockworkMod Recovery to my SGS3?:crying:
http://forum.xda-developers.com/showthread.php?t=1726558
Here you go!
Sent from my SPH-L710 using xda premium
Listen, im new to the SG3 myself.
This is what i did:
Used the SG3 Tool Kit, it rooted it and flashed CWM. But, that CWM was old. Then i updated through Rom Manager and it updated CWM 6.0
Then i went into recovery and made a backup. Working perfect. Don't drive yourself crazy. Used the Toolkit, it'll automate you and give you directions on what to do in Odin ect.
youngnex said:
Listen, im new to the SG3 myself.
This is what i did:
Used the SG3 Tool Kit, it rooted it and flashed CWM. But, that CWM was old. Then i updated through Rom Manager and it updated CWM 6.0
Then i went into recovery and made a backup. Working perfect. Don't drive yourself crazy. Used the Toolkit, it'll automate you and give you directions on what to do in Odin ect.
Click to expand...
Click to collapse
+1 on the toolkit, very simple to use and straight forward. Just read the directions and you'll be ok.
http://forum.xda-developers.com/showthread.php?t=1746680
Thanks guys! I'll have to buy a new computer with upgrade before using it. My current computer sucks!
Sent from my SPH-L710 using xda app-developers app
Hey everyone, I updated my T-Mobile S3 to 4.1.1 when it came out two weeks ago and my phone was rooted on ICS. I had already downloaded the stock firmware to use with Odin before the root66 firmware was uploaded here. I was too lazy to redownload it so I figured I would just root after I updated to JB. I realized the toolkit that I used to root in ICS does not work in JB and after looking through the forum it seemed like the only way would be to push the root66 firmware in Odin. The thread that shows how to use the roo66 says that its used if you don't want to void your warranty and if it does not matter there are easier ways to do it. So, is there a faster way to root the T-Mobile stock JB or would I have to use root66 with odin? Also, when I pushed the stock JB using odin I did not lose any data on the phone, I know it's probably the same with the root66 but I just wanted to double check with you guys if I would lose any data after pushing the root66 firmware using odin. All help will be appreciated. Thanks a lot.
No you shouldn't lose any data, but it can happen. Always backup first!
Root66 imo is the easiest and safest way. You can check out cf-root in original development too. Never used that one though.
Sent from my SGH-T999 using xda premium
Thanks Doc. Also, the only real reason I wanted my root back was to use the Wifi Tether app. It worked well on ICS however I heard people were having problems with it on JB. Do you or anyone else know if it works or not?
It has been confirmed working, but Tmo has also been blocking tethering on more devices.
Sent from my SGH-T999 using Tapatalk 2
Search xda for treve tether. He's released a mod that seems to have a very high success rate.
Sent from my SGH-T999 using xda premium
PsychDrummer said:
Thanks Doc. Also, the only real reason I wanted my root back was to use the Wifi Tether app. It worked well on ICS however I heard people were having problems with it on JB. Do you or anyone else know if it works or not?
Click to expand...
Click to collapse
download an app called easy tether. easy as it gets right there man, the app will walk you through the setup... when you get to the part when you need to find out what version of windows you are on (if on windows), open your start menu and where it says "search programs and files" type: dxdiag
your system info will pop up. on your way
as far as the rooting method, honestly, i think CF root is the easiest way. it's just booting into download mode and navigating to the .tar.md5 file... he wasn't joking when he said it literally takes 30 seconds.
and that easy tether app, does not require root access. so go ahead and download it naaaoooo
good luck bud
Hi there,
Not sure if anyone can help me out here, but I have been looking all day for a thread which I used probably back in october to root my s3, it doesn't use ODIN, and it doesn't trip counter, I think the method involve me transferring some file which gave me temporary root and add some other file to finish the root process. Now i'm trying to help my sister to root her s3, and would like to use the same method because I don't have a PC to use ODIN.
J
If you have a Linux box or Mac you can use heimdall which is a terminal version of Odin.
On the other hand, I know the root method you are talking about but I can't find it.
Sent from my SGH-I747 using xda premium
Hi. I have a new GS4 arriving in a few days and wanted to find out what needs to be done in order to use titanium backup and to do a nandroid.
I have read conflicting stories that it needs to be fully rooted, that it only needs the bootloader unlocked, and that the bootloader comes already unlocked on the T-Mobile version. Can someone please clarify for me? I don't need to flash a custom ROM or kernel or anything like that. The phone is for my son, so all I want is to be able to do full backups for him. Thanks.
Sent from my Nexus 7 using xda premium
You need to be rooted.
-Titanium BU will backup your app plus app data
-For a nandroid backup you'll need to have a custom recovery (ie CWM, TWRP)
I used this for root (it will install SU binary and app, plus stock recovery)
http://forum.xda-developers.com/showthread.php?t=2294005
To install custom recovery you can use Odin to flash the tar version or use ROM manager, GOO ect depending on the recovery you want.
Everything baseballfanz posted.
The M919 Bootloader comes Unlocked outta the box.
For years, I've used Titanium Backup with the Pro key. Excellentsand theGGold Standard. Does everything except pour your coffee
I also use My Backup Pro as a redundancy. I primarily use it to backup & restore my Call Logs, MMS, SMS, etc . It also backs up & restores Apps and Data. I set it to back on a schedule.
For a Custom Recovery, I use TWRP 2.5.0.2.
https://hotfile.com/dl/230303459/7ce1553/openrecovery-twrp-2.5.0.2-jfltexx.tar.html
If you decide to flash TWRP, don't flash with Goo Manager as it will install TWRP 2.6.0.0 of which known issues have been reported. TWRP 2.5.0.2 has very little issues if any. I've been using it for months without any issues. Working flawlessly. TWRP also gets installed with ODIN. If you need the steps, let me know and I'll post them.
For Rooting, I also use CF-AUTO-ROOT by Chainfire installed with ODIN. Easy as pie, or however that saying goes.
Any questions, post away
Thanks to both of you. I'm already familiar with Titanium as I use the pro version on my tmo MT4G, rooted with cwm and running cyanogen. At least for now. I'll be getting myself the GS4 as well soon. So I know the virtues of using TB.
However, my son wants to stick with stock and get ota updates and I want him to be able to remove bloatware, backup everything, and be able to tweak a few things like the whole YouTube link issue(if it's still an issue) so we're looking for a reasonable compromise.
I also currently use cwm ROM manager app, droidwall, and spare parts+ which I would like to put on his phone if they will work.
Biker1... When you say bootloader comes unlocked, that's for the tmo one we will be getting?
Sent from my Nexus 7 using xda premium
Yes the T-mobile version M919 come with an unlocked bootloader.
OK thx good to know. So what will be my first step when unboxing it in order to be able to use the aforementioned apps? I also have root explorer, mybackup root, s2e, and superuser on the MT4G if they will be useful on the GS4.
Sent from my Nexus 7 using xda premium
Sorraia3 said:
OK thx good to know. So what will be my first step when unboxing it in order to be able to use the aforementioned apps? I also have root explorer, mybackup root, s2e, and superuser on the MT4G if they will be useful on the GS4.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Charge the battery fully!
Make sure you have a good known working usb cable. You should as it will be a new one.
You wanna have enough juice to do your installations and if things run a little long, you don't wanna get stuck in the middle
You have those Rooted apps so you can root the S4 using:
CF-AUTO-ROOT by Chainfire using ODIN. I'll post a link soon.
http://forum.xda-developers.com/showthread.php?t=2294005
In addition, install a Custom Recovery. There are a few good ones.
Personally, I use TWRP 2.5.0.2
Don't use Goo Manager as that will install version 2.6.0.0 which has known issues. Been using 2.5.0.2 for months without issue, but you can use a custom recovery of your choice of course.
So:
Charge battery
Have a good usb cable
ODIN CF-AUTO-ROOT
Boot
ODIN Custom Recovery
Boot
Check you S4 to make sure you're good to go.
Make a Nandroid
Install your Apps
When ready, download and Flash a ROM and Enjoy
OK it seems he really wants a chance to play with it out of the box. So, once its charged, it's his for now. I'm wondering though, if the bootloader is unlocked already does that mean if we choose to root it at a later date it won't need to be wiped or will it still lose anything not on the sd card?
I already went through this with one son who got a new phone and ended up losing everything on the old one because he wouldn't let me root it from the start and back things up. But that phone would've required a full wipe when I unlocked the bootloader.
If this guy starts setting things up and installing apps and data and such, and then wants me to root it for TB, will he lose everything?
Sent from my Nexus 7 using xda premium
Sorraia3 said:
OK it seems he really wants a chance to play with it out of the box. So, once its charged, it's his for now. I'm wondering though, if the bootloader is unlocked already does that mean if we choose to root it at a later date it won't need to be wiped or will it still lose anything not on the sd card?
I already went through this with one son who got a new phone and ended up losing everything on the old one because he wouldn't let me root it from the start and back things up. But that phone would've required a full wipe when I unlocked the bootloader.
If this guy starts setting things up and installing apps and data and such, and then wants me to root it for TB, will he lose everything?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
No. You can Root ltr on and not lose anything.
Rooting via CF-AUTO-ROOT via ODIN will not cause you to have to Wipe anything.
He can always back up his files every once in a while to his pc, which you would do whether you're gonna Root or not, for that 'Just in case' moment. You know, Murphy's Law
I don't do that as often as I should.
If there's a time when you have to Wipe device memory, you'd just transfer the files to the pc and/or SD card.
If everything's good to go, and you're ready to Root, But things go wrong (Murphy's Law again) and you have to wipe Internal but you didn't save the files, you'll be outta luck, but that can happen anytime. So just back up once in a while. Better safe than sorry........
What will most likely happen:
- your son will dl files, games, etc.
- later on, days, weeks, months, he'll want to Root
- you'll ODIN CF-AUTO -ROOT by Chainfire and you'll be good to go.
- after installing Recovery and TiBu, you'll back up the data on the device,and that's it.
OK... That's exactly what I wanted to know. Thanks so much!
Alrighty so, Odin is the program I will use to access the adb commands on the pc, correct? And I get that from where?
And the cf root file? Is there a handy link? Steps to follow, a guide perhaps?
After that's done I assume I have to flash the recovery? I prefer cwm. Or is that part of the cf/odin process?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Sorraia3 said:
OK... That's exactly what I wanted to know. Thanks so much!
Alrighty so, Odin is the program I will use to access the adb commands on the pc, correct? And I get that from where?
And the cf root file? Is there a handy link? Steps to follow, a guide perhaps?
After that's done I assume I have to flash the recovery? I prefer cwm. Or is that part of the cf/odin process?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The CF-AUTO-ROOT link is posted previously. You install with ODIN.
I'll get you a link to ODIN so you can see what it's about.
You dl ODIN on your pc. You need drivers installed on your pc to recognize your S4.
You put tar files in the appropriate ODIN boxes
Tar files can be extracted from zip files.
You have to follow ODIN instructions exactly.
I'm briefly going through the basics as you really need to read the associated threads so you get an idea how the process works, then you'll probably have some questions which we can answer.
I'm not sure if CWM Recovery is installed via ODIN.
TWRP is. I use Version 2.5.0.2. But you can use CWM. There's a thread to show you howttoiinstall.
Root with CF-AUTO-ROOT via ODIN 3.07
Install Recovery (method depends on choice of Recovery)
Make a Nandroid backup
Then you can install, flash, etc. etc.....
Ok so he decided it was easy and quick enough to let me do it now. I'm following the thread instructions. I have the cf root and odin files. I run odin, check pda and pick the cf root file. I turn off phone, go into download mode and get the green android that says downloading do not turn off target. Now what?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Sorraia3 said:
Ok so he decided it was easy and quick enough to let me do it now. I'm following the thread instructions. I have the cf root and odin files. I run odin, check pda and pick the cf root file. I turn off phone, go into download mode and get the green android that says downloading do not turn off target. Now what?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Connect to pc usb port to:
- a known working port
- with a known working usb cable. Stock cable should be fine.
HOLD ON
WAIT!
Sorraia3 said:
Ok so he decided it was easy and quick enough to let me do it now. I'm following the thread instructions. I have the cf root and odin files. I run odin, check pda and pick the cf root file. I turn off phone, go into download mode and get the green android that says downloading do not turn off target. Now what?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
-Plug phone into USB cord attached to pc
-It might need to install drivers just wait till that's done
-Click on START button on Odin
Everything you need to know is posted in the CF, auto root post.
Post=2 http://forum.xda-developers.com/showthread.php?p=41797153
Nothing happens. Its just me and the little green android sitting here staring at each other.
Sent from my Nexus 7 using XDA Premium 4 mobile app
You're doing it backwards.
Open up ODIN
After you have s4 in dl mode
Plug into usb on pc
Wait for phone to be recognized via COM Port
THEN put tar files in PDA slot and check appropriate boxes
AsiI explained previously, learning the process is extremely important, and without being there, so to speak, things can go wrong, Fast....
It found the phone, said had the samsung drivers then nothing. It's not showing up under ID:COM and I still have my little green friend again.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Sorraia3 said:
It found the phone, said had the samsung drivers then nothing. It's not showing up under ID:COM and I still have my little green friend again.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is the COM Port showing
COM 1 or another number and showing in Blue or Green
No
Its not the usb port, I don't think anyway. Mouse works in both.
Of course I am on a crappy vista laptop... Think I'd have better luck using the xp desktop?
Sent from my Nexus 7 using XDA Premium 4 mobile app
pm sent
Hi I am new to this forum and a casual user. I wanted to root my note 2 tmobile android version 4.3 and actually rooted it once but knox created a lot of problem. I could not even launch titanium backup to freeze knox. Or was completely unable to disable knox. Now as android 4.3 has been released for quite a few months. Does anyone know of a method which will root my galaxy note 2 tmobile (SGH-T889) for sure and let me completely disable knox? If so please give me step by step instruction of rooting my device or alteratively you can provide me a link of the instruction so I can root my note 2 phone. I appreciate your help.
cooljd1 said:
Hi I am new to this forum and a casual user. I wanted to root my note 2 tmobile android version 4.3 and actually rooted it once but knox created a lot of problem. I could not even launch titanium backup to freeze knox. Or was completely unable to disable knox. Now as android 4.3 has been released for quite a few months. Does anyone know of a method which will root my galaxy note 2 tmobile (SGH-T889) for sure and let me completely disable knox? If so please give me step by step instruction of rooting my device or alteratively you can provide me a link of the instruction so I can root my note 2 phone. I appreciate your help.
Click to expand...
Click to collapse
cf auto root should work for root. what did you use to root? if you are rooted install a custom recovery and flash a knoxfree rom from the dev section
Flash CF auto root via Odin then download latest superuser from play store and you are ready to go.
All credits to ChainFire
Did you try this method, if so did it work for you? Im having similar issues with my tmobile note 2 running 4.3 too. I'd appreciate it, thanks in advance...
Sent from my SGH-T889 using XDA Premium 4 mobile app
J3D1mineTR1X said:
Did you try this method, if so did it work for you? Im having similar issues with my tmobile note 2 running 4.3 too. I'd appreciate it, thanks in advance...
Sent from my SGH-T889 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just as a suggestion, something that happened to me while playing around with the phone: if you're running Stock rom and then flash a custom recovery via Odin (I used Philz Touch) upon booting on recovery just to wipe cache/dalvik I found something interesting: my phone wasn't rooted, so when chosing the option "reboot system now" a message that said something like "root is broken, would you like to root your phone before rebooting" appeared. I was curious, as I normally use a website called Kingo root that does it in a one-click kinda way. When I chose Yes in the recovery, upon booting my phone it was rooted. After, I just intalled Chainfire's SuperSU from the play store and it was all good.
It's worth trying I believe.
Cheers
Sobaro said:
Flash CF auto root via Odin then download latest superuser from play store and you are ready to go.
All credits to ChainFire
Click to expand...
Click to collapse
wavv.drama said:
Just as a suggestion, something that happened to me while playing around with the phone: if you're running Stock rom and then flash a custom recovery via Odin (I used Philz Touch) upon booting on recovery just to wipe cache/dalvik I found something interesting: my phone wasn't rooted, so when chosing the option "reboot system now" a message that said something like "root is broken, would you like to root your phone before rebooting" appeared. I was curious, as I normally use a website called Kingo root that does it in a one-click kinda way. When I chose Yes in the recovery, upon booting my phone it was rooted. After, I just intalled Chainfire's SuperSU from the play store and it was all good.
It's worth trying I believe.
Cheers
Click to expand...
Click to collapse
+wavv.drama
I have a question. If you don't run odin as a administrator do you get this error message: Windows cannot access the specific device path or file. You may not have the appropriate permissions to access. The last time I tried to root my phone i didn't run odin in administrator mode. I'm just finding out about this recently. I have all of the files installed on the computer and ready. Odin, recovery, keis, and supersu zip on sd card. Im just trying to figure out why I got that error message. Any ideas or suggestions would be appreciated. Thanks in advance... Awaiting your response...
"What good is knowledge if it's not to be shared"...
Sent from my SGH-T889 using XDA Premium 4 mobile app
J3D1mineTR1X said:
+wavv.drama
I have a question. If you don't run odin as a administrator do you get this error message: Windows cannot access the specific device path or file. You may not have the appropriate permissions to access. The last time I tried to root my phone i didn't run odin in administrator mode. I'm just finding out about this recently. I have all of the files installed on the computer and ready. Odin, recovery, keis, and supersu zip on sd card. Im just trying to figure out why I got that error message. Any ideas or suggestions would be appreciated. Thanks in advance... Awaiting your response...
"What good is knowledge if it's not to be shared"...
Sent from my SGH-T889 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The only answer that pops up in my mind would be that you weren't running Odin as an administrator, like you mentioned. Maybe try running Odin as an admin, or alternatively (and I haven't tried this myself but Chainfire's thread gives a good step-by-step and people in the forum do help) use mobile Odin ------> http://forum.xda-developers.com/showthread.php?t=1347899. The first time I wanted to root my phone I was having issues too, not being able to do it because of lack of experience. I stumbled upon this website: http://www.kingoapp.com/. Check it out, if you would like. This kingo app is a downloadle app (kind of like Odin) that Roots yourm phone alone, without needing to flash anything. The step-by-step's are there, just turn on your developer options and then turn on USB debugging. I personally rooted A Galaxy Tab, SIII, a Note I i717 and an Asus MemoPad with that website and it worked perfectly for me. Rooting via custom recovery is something that I learned recently, and by chance. I do not know whether it trips the Knox counter or not to be honest with you, to me it doesn't make a difference since I will not be returning any of the devices I rooted, After rooting the phone like so you could potentially download mobile Odin from Chainfire's thread and then use Odin without needing to use your computer.
Hope this helps
+wavv. Drama
Yeah that was it, i rooted it earlier today. I do have another question for you. I ran root checker pro and it says I'm rooted. I tried to install busybox but it said remove supersu permissions reinstall supersu and to delete and reinstall busybox. Also the adb shell doesn't have root access either. So is that a common occurrence, or is it the norm after rooting and installing custom recovery? Awaiting your reply. Thanks in advance...
What good is knowledge if it's not to be shared...
Sent from my SGH-T889 using XDA Premium 4 mobile app
Sorry for the late reply, hadn't been to the forum in a minute. To be honest with u, I don't know for sure. I haven't personally yet served myself from adb so I can't tell u. However, the reason why you received that response from busybox may be because when u were partially rooted it gained root access (if it ever did, I only assume).
Try what was asked of u and I'm sure busybox will work no problems. Also, if u have the terminal emulator apk try entering the command "root" (without the ") and if u gain roots access it will definitely mean you are rooted for sure.
What do you want to use adb for, if I may ask?
Sent from my SGH-T889V using XDA Premium 4 mobile app