Hello. I did a clean install of MMuzzy's Jelly Bean 4.1.2 JZO54K on my Verizon gnex. After I flash gapps 20121011(via the download listed in the OP for this ROM) my phone won't boot to the OS anymore (it only boots to recovery). I've re downloaded the gapps install in case it was corrupt but it didn't help.
Does anyone have any ideas? Thank you in advance.
Moved for better assistance, Thank you.
i would try a fresh download of the rom and/or gapps. did you check the md5 sum of each? you can find it on the goo.im download page
v3rk said:
i would try a fresh download of the rom and/or gapps. did you check the md5 sum of each? you can find it on the goo.im download page
Click to expand...
Click to collapse
Thank you. Yes I downloaded them twice and the checksums all matched.
my only other thought would be to try a different recovery. which do you use?
v3rk said:
my only other thought would be to try a different recovery. which do you use?
Click to expand...
Click to collapse
Clockwork latest version. Never trouble with it before.
Thanks again.
sstanfie said:
Clockwork latest version. Never trouble with it before.
Thanks again.
Click to expand...
Click to collapse
Recovery wasn't current version.
Related
Hi guys,
I have looked at numerous threads and just can't find exactly what I need or maybe I'm too dumb/too much of a noob to understand what I need, I am on CM10.1 nightlies with CWM and I can no longer flash the nightlies. It gives me assert fail messages. After some digging, I think the problem is that I need to update the bootloader as they no longer support the ICS bootloader (I am assuming I am on ICS bootloader, how would I know?). But then I couldn't find the latest bootloader and how to install it. Is that even the problem? Any help is appreciated or even if you can point me to the right thread, that would be awesome. Thanks for the help.
jlor23 said:
Hi guys,
I have looked at numerous threads and just can't find exactly what I need or maybe I'm too dumb/too much of a noob to understand what I need, I am on CM10.1 nightlies with CWM and I can no longer flash the nightlies. It gives me assert fail messages. After some digging, I think the problem is that I need to update the bootloader as they no longer support the ICS bootloader (I am assuming I am on ICS bootloader, how would I know?). But then I couldn't find the latest bootloader and how to install it. Is that even the problem? Any help is appreciated or even if you can point me to the right thread, that would be awesome. Thanks for the help.
Click to expand...
Click to collapse
I'm not 100% sure what the problem is, but I'll take you through step-by-step of what I'd do if my phone were giving me this problem.
Double check the md5sums of the CM10.1 Nightly Zip: It doesn't seem like this is the problem, but it's always the first thing I check.
Update your modem/firmware/baseband: I know the most recent build of LiquidSmooth require you to be on baseband MD4. You can get it over on Freeza's thread. The file you're looking for is:
MD4 Firmware:
MD4 Firmware/modem/baseband update
MD5: EEEAFDBE59CF9C5B492B1A591EC92D02
Click to expand...
Click to collapse
All you have to do is wipe cache and dalvik cache and flash this Rom in your recovery. Reboot and now you're on MD4.
Update your Recovery: I normally run the latest and greatest TWRP, but others like the stability of some of the older builds. I'd flash the latest 2.5.0.0 TWRP from Naddict's thread.
Those would be the first three things I'd try.
topherk said:
I'm not 100% sure what the problem is, but I'll take you through step-by-step of what I'd do if my phone were giving me this problem.
Double check the md5sums of the CM10.1 Nightly Zip: It doesn't seem like this is the problem, but it's always the first thing I check.
Update your modem/firmware/baseband: I know the most recent build of LiquidSmooth require you to be on baseband MD4. You can get it over on Freeza's thread. The file you're looking for is:
All you have to do is wipe cache and dalvik cache and flash this Rom in your recovery. Reboot and now you're on MD4.
Update your Recovery: I normally run the latest and greatest TWRP, but others like the stability of some of the older builds. I'd flash the latest 2.5.0.0 TWRP from Naddict's thread.
Those would be the first three things I'd try.
Click to expand...
Click to collapse
Awesome! Your 2nd suggestion worked! I had tried your other 2 suggestion already with no luck but #2 was what I needed. Thanks so much!
topherk said:
I'm not 100% sure what the problem is, but I'll take you through step-by-step of what I'd do if my phone were giving me this problem.
Double check the md5sums of the CM10.1 Nightly Zip: It doesn't seem like this is the problem, but it's always the first thing I check.
Those would be the first three things I'd try.
Click to expand...
Click to collapse
Yes that most definitely was his problem, the new cm10.1 nightlies require the md4 firmware update because of the bootloader.
Sent from the future via Xparent Green Tapatalk 2
Hi Guys.
Clockwork doesnt seem to install any roms on my GT-19082l for some reason.
When i click on a rom, it says that package is installed but when I reboot the phone, it's stuck at the "samsung galaxy grand" page.
Wat do?
migloredan said:
Hi Guys.
Clockwork doesnt seem to install any roms on my GT-19082l for some reason.
When i click on a rom, it says that package is installed but when I reboot the phone, it's stuck at the "samsung galaxy grand" page.
Wat do?
Click to expand...
Click to collapse
First tell which Rom u tried flashing and on which firmware u were!!!
Sent from my GT-I9082 using Tapatalk 4
migloredan said:
Hi Guys.
Clockwork doesnt seem to install any roms on my GT-19082l for some reason.
When i click on a rom, it says that package is installed but when I reboot the phone, it's stuck at the "samsung galaxy grand" page.
Wat do?
Click to expand...
Click to collapse
Take the recovery .tar file from here according to your firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this step by step instructions : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
This will have to be done each time you flash a firmware through Odin.
If after flashing you get a bootloop, simply boot into recovery and clear cache and dalvik cache and you'll be good :good:
iceyhotguy said:
Take the recovery .tar file from here according to your firmware (4.1.2 or 4.2.2) : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this step by step instructions : http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
This will have to be done each time you flash a firmware through Odin.
If after flashing you get a bootloop, simply boot into recovery and clear cache and dalvik cache and you'll be good :good:
Click to expand...
Click to collapse
Sorry for the late reply, been busy with school.
But will this work with the GT-i9082l? I know some firmware doesn't work with other variants of this phone.
Also I have ClockworkMod Recovery 6.0.4.4 and I was trying to flash Cyanogen Mod 10.1 for the Grand.
Please Help
Guys please help.
migloredan said:
Sorry for the late reply, been busy with school.
But will this work with the GT-i9082l? I know some firmware doesn't work with other variants of this phone.
Also I have ClockworkMod Recovery 6.0.4.4 and I was trying to flash Cyanogen Mod 10.1 for the Grand.
Click to expand...
Click to collapse
Yea same will work for i9082L, just make sure the recovery you are using is compatible with 4.1.2 or 4.2.2, whichever you are flashing it on.
You can flash CM10.1 through any recovery you are using (but CM10.1 only works on 4.1.2 firmware)
iceyhotguy said:
Yea same will work for i9082L, just make sure the recovery you are using is compatible with 4.1.2 or 4.2.2, whichever you are flashing it on.
You can flash CM10.1 through any recovery you are using (but CM10.1 only works on 4.1.2 firmware)
Click to expand...
Click to collapse
Could I Put this on the sdcard instead of the internal memory?
Also this is what it says when ever i try to flash CM 10.1 or any other ROM
Finding update package...
Opening update Package...
Installing update...
Install from sdcard complete.
Then when I reboot the phone it stays at the Samsung Galaxy Grand page.
migloredan said:
Also this is what it says when ever i try to flash CM 10.1 or any other ROM
Finding update package...
Opening update Package...
Installing update...
Install from sdcard complete.
Then when I reboot the phone it stays at the Samsung Galaxy Grand page.
Click to expand...
Click to collapse
Yes you can put it on sd card.
Make sure you are on 4.1.2 before installing CM10.1, if you are not that's the reason for your bootloop.
And wipe data/cache/dalvik before flashing CM10.1 or any other ROM.
Still doesnt work. :crying:
It was stock 4.1.2, then I tried to update it to 4.2.2 using ODIN but it failed (This is the reason why i'm trying to install CM 10.1).
Is the phone 4.2.2 or 4.1.2?
migloredan said:
Still doesnt work. :crying:
It was stock 4.1.2, then I tried to update it to 4.2.2 using ODIN but it failed (This is the reason why i'm trying to install CM 10.1).
Is the phone 4.2.2 or 4.1.2?
Click to expand...
Click to collapse
Your firmware flash failed in the middle? If this happened you need to reflash the 4.1.2 firmware before you can flash any ROM on it.
iceyhotguy said:
Your firmware flash failed in the middle? If this happened you need to reflash the 4.1.2 firmware before you can flash any ROM on it.
Click to expand...
Click to collapse
Do you know where to get the firmware? Or a guide I can follow? Most download links are from hotfile and it shut down.
Thanks for helping btw.
migloredan said:
Do you know where to get the firmware? Or a guide I can follow? Most download links are from hotfile and it shut down.
Thanks for helping btw.
Click to expand...
Click to collapse
You can try searching the XDA threads or google, I don't know of any firmware mirrors for i9082L sorry
iceyhotguy said:
You can try searching the XDA threads or google, I don't know of any firmware mirrors for i9082L sorry
Click to expand...
Click to collapse
I found firmware on sam mobile, will try it out.
Hope this works. :fingers-crossed:
Background:
Decided to fresh install CM via the fancy new installer and just refresh everything.
This wouldn't complete correctly.
Attempted to manually install 10.2 but get an assert failure.
Reinstalled 10.1.3 and it is currently running.
Current problem; CM10.2 / CM11 will not install correctly.
I'm pretty sure its just a matter of updating recovery or something silly but I can't find any concrete information regarding this.
Running: CWM v6.0.4.5
When I attempt to install either version I get an Assert Failed.
Suggestions?
6.0.4.5 is the latest CWM.
Are you sure you are choosing the CM for YOUR device ?
Perseus71 said:
6.0.4.5 is the latest CWM.
Are you sure you are choosing the CM for YOUR device ?
Click to expand...
Click to collapse
Pretty sure, since if I choose 10.1.3 and install it from the same download page it works.
I've always used d2tmo
It's a Samsung Galaxy S3 from WIND mobile.
Mod: SGH-T999V
I've tried the following CM versions from get.cm
cm-10.2.0-RC1-d2tmo.zip
cm-11-20140104-SNAPSHOT-M2-d2tmo.zip
cm-10.2-20131102-SNAPSHOT-M1-d2tmo.zip
If that's the case then edit the updater script and add your device to the Asserts or remove them alltogether.
Perseus71 said:
If that's the case then edit the updater script and add your device to the Asserts or remove them alltogether.
Click to expand...
Click to collapse
Yeah my baseband is currently T999VVLLH2 when looking at about phone, which I don't see in the list when its failing the assert.
Currently failing looking for;
T999UVDLJA
T999UVDLJC
T999UVDMD5
T999UVUEMJC
T999VVLDLL1
T999LUVAMB7
T999VVLDMF2
T999VVLUEMK5
Vyr1s said:
Yeah my baseband is currently T999VVLLH2 when looking at about phone, which I don't see in the list when its failing the assert.
Currently failing looking for;
T999UVDLJA
T999UVDLJC
T999UVDMD5
T999UVUEMJC
T999VVLDLL1
T999LUVAMB7
T999VVLDMF2
T999VVLUEMK5
Click to expand...
Click to collapse
Updated my baseband to match "T999VVLUEMK5".
Still failing though.
Vyr1s said:
Updated my baseband to match "T999VVLUEMK5".
Still failing though.
Click to expand...
Click to collapse
Updated to the newest bootloader, updated the modem again, finally accepted CM11 snapshot, installed gapps for KK and everything is gravy now.
Vyr1s said:
Updated to the newest bootloader, updated the modem again, finally accepted CM11 snapshot, installed gapps for KK and everything is gravy now.
Click to expand...
Click to collapse
Its not the baseband but the Bootloader that it was looking for. So when you updated the bootloader, it accepted that. Glad its all sorted out.
Vyr1s said:
Updated to the newest bootloader, updated the modem again, finally accepted CM11 snapshot, installed gapps for KK and everything is gravy now.
Click to expand...
Click to collapse
Hi,
I am having the same issue, can you point me the thread that shows the step by step procedure to update my boatloader pls
dealguy007 said:
Hi,
I am having the same issue, can you point me the thread that shows the step by step procedure to update my boatloader pls
Click to expand...
Click to collapse
Try this thread.
Can someone post the link to download latest PACMAN build for HOX.
The following xda page contains links that directs us to basketbuild site which does not contain the ROM build for endeavoru.
http://forum.xda-developers.com/showthread.php?t=2292547.
So please someone post the authentic link.
Thanks in advance.
deepakramji said:
Can someone post the link to download latest PACMAN build for HOX.
The following xda page contains links that directs us to basketbuild site which does not contain the ROM build for endeavoru.
http://forum.xda-developers.com/showthread.php?t=2292547.
So please someone post the authentic link.
Thanks in advance.
Click to expand...
Click to collapse
Unofficial version
the official one is stopped and the files are pulled from basketbuild
suljo94 said:
Unofficial version
the official one is stopped and the files are pulled from basketbuild
Click to expand...
Click to collapse
Hey man, I'm sorry.. I need some help and it is related to that room.. I hope you can help me, yesterday I unlocked the bootloader, rooted the phone and installed twrp with Hasoon2000's toolkit, after a nandroid, I wiped Dalvik, Cache and Factory reset, when I tried to install the rom it starts installing it and after a little bit it just says 'failed', could it be that the custom recovery is outdated? If so, how can I update it? Thanks in advance and sorry for my bad english.
rmanueld said:
Hey man, I'm sorry.. I need some help and it is related to that room.. I hope you can help me, yesterday I unlocked the bootloader, rooted the phone and installed twrp with Hasoon2000's toolkit, after a nandroid, I wiped Dalvik, Cache and Factory reset, when I tried to install the rom it starts installing it and after a little bit it just says 'failed', could it be that the custom recovery is outdated? If so, how can I update it? Thanks in advance and sorry for my bad english.
Click to expand...
Click to collapse
you installed an wrong recovery try
http://forum.xda-developers.com/showthread.php?t=2776581
suljo94 said:
you installed an wrong recovery try
http://forum.xda-developers.com/showthread.php?t=2776581
Click to expand...
Click to collapse
It worked, I'm using the pac rom as we speak, thanks for the info dude.
So I've been at this for a while now. I've had no issue flashing to LiquidSmooth's Liquid-JB-v2.7-UNOFFICIAL-d710 Android 4.2.2, but I can't for the life of me get this thing to install a version of 4.3.x or 4.4.x.
Right now, I've rolled back to: Rwilco12's SPH-D710_GB27_1014481_Rooted_Nodata.exe Android 4.1.2.
I have CM 11, but when I try to install it using recovery mode, it errors out and aborts the install. All the instructions I find, keep telling me to install CM's 10.2 and then update the bootloader, but I can't find links to the old versions to any of these.
Is there anything in 4.3.x or 4.4.x that has a 1 click Odin install? Or can someone walk me through taking this thing from GB27 to something new? I believe it is rooted per Rwilco's image name.
chosos said:
So I've been at this for a while now. I've had no issue flashing to LiquidSmooth's Liquid-JB-v2.7-UNOFFICIAL-d710 Android 4.2.2, but I can't for the life of me get this thing to install a version of 4.3.x or 4.4.x.
Right now, I've rolled back to: Rwilco12's SPH-D710_GB27_1014481_Rooted_Nodata.exe Android 4.1.2.
I have CM 11, but when I try to install it using recovery mode, it errors out and aborts the install. All the instructions I find, keep telling me to install CM's 10.2 and then update the bootloader, but I can't find links to the old versions to any of these.
Is there anything in 4.3.x or 4.4.x that has a 1 click Odin install? Or can someone walk me through taking this thing from GB27 to something new? I believe it is rooted per Rwilco's image name.
Click to expand...
Click to collapse
Change the recovery that your using. What doesn't flash in ClockworkMod might flash perfectly in Philz Recovery or TWRP.
Sent from my 710C using XDA Free mobile app
I'm going to need more help with that aspect. I've tried that. I have TWRP in a zip file that I've tried to install. I downloaded TWRP Manager from the App store. I downloaded Rom manager. Nothing seems to be working. When I select reboot into recovery, it just goes to the stock android recovery and says it failed.
I am able to install E4GT-EL29-directbootCWM-v3.tar.md5
or StockCWM-EL26.tar.md5 using Odin, but no luck installing TWRP.
I'm sure I'm doing something wrong, but I have no idea what. This is likely a simple process, but I don't know which files or what order to do this in.
When I flash to E4GT-EL29-directbootCWM-v3.tar.md5 from Odin, it leaves me in recovery mode until I install LiquidSmooth 4.2.x.
chosos said:
I'm going to need more help with that aspect. I've tried that. I have TWRP in a zip file that I've tried to install. I downloaded TWRP Manager from the App store. I downloaded Rom manager. Nothing seems to be working. When I select reboot into recovery, it just goes to the stock android recovery and says it failed.
I am able to install E4GT-EL29-directbootCWM-v3.tar.md5
or StockCWM-EL26.tar.md5 using Odin, but no luck installing TWRP.
I'm sure I'm doing something wrong, but I have no idea what. This is likely a simple process, but I don't know which files or what order to do this in.
When I flash to E4GT-EL29-directbootCWM-v3.tar.md5 from Odin, it leaves me in recovery mode until I install LiquidSmooth 4.2.x.
Click to expand...
Click to collapse
There are already numerous threads here with the same question and answer [emoji6]
Surj138 said:
There are already numerous threads here with the same question and answer [emoji6]
Click to expand...
Click to collapse
Yeah? shoot me the link for one that is working. I was reading all night - most link to threads from 2013 with links that are all broken. You want to send me a working one - great
Most start from something newer, older, etc. Everything I found on GB27 didn't work. Right now, I'm on GB27, with an e3 recovery image from RWilco. I can use the guides to get me from there to Liquidsmooth 4.2.x, but any progress beyond that doesn't work, and I don't want to brick the phone.
chosos said:
Yeah? shoot me the link for one that is working. I was reading all night - most link to threads from 2013 with links that are all broken. You want to send me a working one - great
Most start from something newer, older, etc. Everything I found on GB27 didn't work. Right now, I'm on GB27, with an e3 recovery image from RWilco. I can use the guides to get me from there to Liquidsmooth 4.2.x, but any progress beyond that doesn't work, and I don't want to brick the phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=55623318
http://forum.xda-developers.com/showthread.php?p=50070702
http://forum.xda-developers.com/showthread.php?p=55542264
This should get you going, but let me know if you need any further assistance
Good luck! [emoji2]
Surj138 said:
http://forum.xda-developers.com/showthread.php?p=55623318
http://forum.xda-developers.com/showthread.php?p=50070702
http://forum.xda-developers.com/showthread.php?p=55542264
This should get you going, but let me know if you need any further assistance
Good luck! [emoji2]
Click to expand...
Click to collapse
Thanks, this got me through it. I ended up using philz_touch_6.15.9-d710.tar to install Cyanogen 11 and gapps for 4.4.2.
Should I be all done now, or would there be more things I'd have to install? I never did anything with the modem files. I also only plan on using this as a PDA so I'm not sure if that is needed.
chosos said:
Thanks, this got me through it. I ended up using philz_touch_6.15.9-d710.tar to install Cyanogen 11 and gapps for 4.4.2.
Should I be all done now, or would there be more things I'd have to install? I never did anything with the modem files. I also only plan on using this as a PDA so I'm not sure if that is needed.
Click to expand...
Click to collapse
If you never flashed anything modem-wise, then you're still running the GB27 (JB) modem. You'll need a Gingerbread or ICS modem only if you want working 3g data/MMS messaging.
Otherwise, JB modems shouldn't cause any problems that I know of.