Related
So, I have successfully rooted my phone and gained superuser rights. This was my first time rooting a phone. So, I get the cm7 rom from cm's website I. I put it on my sd card, and I go to flash it and it gives me some sort of error... Something about verification? If anyone could help out that would be splendid.
I have a galaxy s2 t989.
Our phone isn't on cyanogen mods website so u probably got the build for the wrong phone. Ur lucky it didn't install otherwise u would have a brick right now. Get the cyanogen build from the development section of this forum
Sent from my SGH-T989 using XDA
Hmm...
Thanks for the info... glad I didnt brick my phone!
I found this Rom Cyanogenmod 7 Self-Kang For Tmo-Sgs2 Alphafied #2 2.3.7 Updated.. and the links were broken. Tried rootzwiki... broken as well.
Do you have any suggestions on a good build? I was looking for something with just gingerbread like the cm7 build...?
snootchies06 said:
Thanks for the info... glad I didnt brick my phone!
I found this Rom Cyanogenmod 7 Self-Kang For Tmo-Sgs2 Alphafied #2 2.3.7 Updated.. and the links were broken. Tried rootzwiki... broken as well.
Do you have any suggestions on a good build? I was looking for something with just gingerbread like the cm7 build...?
Click to expand...
Click to collapse
I would like good links to those too.
However, try this...http://forum.xda-developers.com/showthread.php?t=1416445
It's a great Rom to hold you over for an official CM. Without trying Slayher's actual versions but reading comments I believe it might even be more stable than where he left off.
snootchies06 said:
Thanks for the info... glad I didnt brick my phone!
I found this Rom Cyanogenmod 7 Self-Kang For Tmo-Sgs2 Alphafied #2 2.3.7 Updated.. and the links were broken. Tried rootzwiki... broken as well.
Do you have any suggestions on a good build? I was looking for something with just gingerbread like the cm7 build...?
Click to expand...
Click to collapse
You are probably like me....
I came from the G2 and all I knew was CM7 (most roms based off cm7 in that section at that time). Once I got the Galaxy S II, I was sad that there was no completely finished and supported cm7 builds. I tried the ones mentioned and they do work for the most part but you have to turn on gps before rebooting or you lose audio in calls.
Anyways...long story short, try out some touchwizz roms. You will find that they are almost exactly like gingerbread roms from cm7. You can get a different launcher than TouchWizz (like ADW, Launcher Pro, Go, ect) and your basically there. The settings menu will look different, and some animations and tones will be a little different....(you can customize all of this stuff BTW!) but after I used it for a week I was used to it and I was over the whole Cm7 gingerbread look that I thought I had to have!
Hope this helps.
Anyways, l
Here you go
Here's a good link for CyanogenMod 7 Self Kang 2. http://www.4shared.com/zip/oGKIwRpK/update-cm-720-RC0-Self-KANG-2-.html . Enjoy.
I've always trolled these forums, and currently I'm using CM7.3 and it's a little slow, I'm thinking of going back to stock but I like the overclocking options. What is a good ROM recommended by the community for The original HTC Incredible ADR6300? Thanks for your feedback!
I am running CM9 and I love it. It's a little buggy at times, but I'd rather put up with that and have ICS features than not have it.
aaronandshag said:
I've always trolled these forums, and currently I'm using CM7.3 and it's a little slow, I'm thinking of going back to stock but I like the overclocking options. What is a good ROM recommended by the community for The original HTC Incredible ADR6300? Thanks for your feedback!
Click to expand...
Click to collapse
Well you can just flash the newest stock 4.08.605.15 rom, and then flash a custom kernel like gingertiny. You could use my rom Touch Of Blue. Its mostly stock based on android 4.08.605.15 with many usefull enhancements, and has the gingertiny kernel built in. You could also use one of the many older android version based roms with a custom kernel.
cmlusco said:
Well you can just flash the newest stock 4.08.605.15 rom, and then flash a custom kernel like gingertiny. You could use my rom Touch Of Blue. Its mostly stock based on android 4.08.605.15 with many usefull enhancements, and has the gingertiny kernel built in. You could also use one of the many older android version based roms with a custom kernel.
Click to expand...
Click to collapse
Do these ROMS have options like overclocking, 360degree tilt, and/or have the volume rocker wake up the device?
Thank you so much for your feedback it's great to know the community is still rocking this device.
Try them all.
I bought a used dinc in April, I have been flashing any rom I can get my hands on.
Sent from my ADR6300 using xda app-developers app
aaronandshag said:
Do these ROMS have options like overclocking, 360degree tilt, and/or have the volume rocker wake up the device?
Thank you so much for your feedback it's great to know the community is still rocking this device.
Click to expand...
Click to collapse
Most all custom kernels have over/underclocking. None of the roms i mentiomed have tilt or rocker wakup, but my rom TOB does have a trackball wake, unlock, or wake&unlock flashable mods.
cmlusco said:
Most all custom kernels have over/underclocking. None of the roms i mentiomed have tilt or rocker wakup, but my rom TOB does have a trackball wake, unlock, or wake&unlock flashable mods.
Click to expand...
Click to collapse
Thank you very much! I'll look into flashing it and see how it goes! Right now I'm busy with finals but I'll let you all know how it goes. My power button broke off and I actually use a key to trigger the circuit between the points to power on the device, and having the volume rocker wake it up has been pretty convenient, but having the trackball wake it up would be nice because it's sunken on my device a little, thus making it less able to wake up. Could you also point me in the direction to flashing that ability on top of your ROM? Or is it built in?
aaronandshag said:
Thank you very much! I'll look into flashing it and see how it goes! Right now I'm busy with finals but I'll let you all know how it goes. My power button broke off and I actually use a key to trigger the circuit between the points to power on the device, and having the volume rocker wake it up has been pretty convenient, but having the trackball wake it up would be nice because it's sunken on my device a little, thus making it less able to wake up. Could you also point me in the direction to flashing that ability on top of your ROM? Or is it built in?
Click to expand...
Click to collapse
It is a seperate flashable that can be found in the fourth post of the roms thread here. http://forum.xda-developers.com/showthread.php?t=1492720 Just wipe everything in the mounts and storrage menu in recovery except emmc and sdcard. Then flash the rom, and then flash the mod right after and boot.
duplicate post
cmlusco said:
It is a seperate flashable that can be found in the fourth post of the roms thread here. http://forum.xda-developers.com/showthread.php?t=1492720 Just wipe everything in the mounts and storrage menu in recovery except emmc and sdcard. Then flash the rom, and then flash the mod right after and boot.
Click to expand...
Click to collapse
Ok thanks alot! I'll look into that after homework.
I don't have a plan with this device as I only need to use it for fun. I own a Pantech Link, and ATT is my carrier. Do I need a plan with Verizon to utilize the GPS?
Pr0f_Farnsw0rth said:
I am running CM9 and I love it. It's a little buggy at times, but I'd rather put up with that and have ICS features than not have it.
Click to expand...
Click to collapse
Just curious, what version of CM9 are you using? KANG or something or other? Does Bluetooth or camcorder work? If so which exact build are you running? Thanks!
You should also check out Albinomans jellybean beta 3, i've been using his jellybean rom since beta 1.5 and it is the best rom out there for jellybean on the Inc IMO. The only things that don't work are the camcorder and bluetooth.
ck04 said:
You should also check out Albinomans jellybean beta 3, i've been using his jellybean rom since beta 1.5 and it is the best rom out there for jellybean on the Inc IMO. The only things that don't work are the camcorder and bluetooth.
Click to expand...
Click to collapse
I would if the link was up!
got em
was using albinoman's beta 3 but too many launcher failures. back to an ICS rom.
aaronandshag said:
I would if the link was up!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1858850
That has a mirror for the JB beta 3
I currently use albinoman's beta 3 jelly bean rom and it works great for me. That being said I would recommend flashing CyanogenMod's ver 7.2 as it is well tested and a solid first rom to flash. You can find it at cyanogenmod.com. Just click on devices and find the incredible in the list. glhf
Hi everyone,
I just bought an i927, and I'm really looking forward to installing some custom ROMs. Above all, I'd love to see a MIUI rom for this device. MIUI is hands down my favorite Android flavor. What do you think about these instructions for creating a "MIUI PatchROM"?
http://forum.xda-developers.com/showthread.php?t=1483332It looks to me like it should be possible to MIUI-ify an existing stable ROM for the i927 with this method. What do you think?
Thanks, cheers.
interesting if you will to do this I would recommend you use the "[07.06.12]Osimood v2.06.07" ROM as that one is based off of 2.35 and has all bloat removed. Will make for a good starting point for you. you can find it at this thread http://forum.xda-developers.com/showthread.php?t=1462298 good luck and I hope you get it working MIUI is a nice looking ROM
JB
sb56637 said:
Hi everyone,
I just bought an i927, and I'm really looking forward to installing some custom ROMs. Above all, I'd love to see a MIUI rom for this device. MIUI is hands down my favorite Android flavor. What do you think about these instructions for creating a "MIUI PatchROM"?
http://forum.xda-developers.com/showthread.php?t=1483332It looks to me like it should be possible to MIUI-ify an existing stable ROM for the i927 with this method. What do you think?
Thanks, cheers.
Click to expand...
Click to collapse
That would be interesting, but it's dated february and based on GB.
I think we should consider basing it on ICS: CM9 is coming, it should be easier (assuming CM9 works well).
Hmm, I was also wondering if those instructions would work for ICS too. I know that MIUI is currently running with the ICS base on other devices.
As for me, I doubt I have the skills to pull this off.
Is this still stands? It would be really cool to have MIUI v4 on the glide!
Someone recently mentioned wanting to give it a try in the CM10 topic, so it seems it's on!
Gab1288 said:
Is this still stands? It would be really cool to have MIUI v4 on the glide!
Click to expand...
Click to collapse
Unfortunately I think I'm too dumb to follow those sketchy instructions that I linked to, which assume a huge amount of knowledge of the Android base system and its frameworks. But, for those who have already created ROMs for the i927 or even other devices, I suspect it would be relatively easy.
I though I'd look into trying this! I'll need some help from some willing dev' s and Linux gurus!
So far I have followed the instructions from get hub, synced the patchrom. Following the command to adb pull "stockrom.zip" from my glide is getting errors and won't make the zip.
I'm currently running the new UCLJ3 ics update that is rooted, deodexed, and zipaligned, with litekernel v1.1. I'll have to redo the adb pull to get the error, can't remember what it was. It was at the end when it was about to make the zip.
If anyone is willing to help, I'll post the exact error later tonight after work!
Sent from my SGH-I927 using Tapatalk 2
I've been trying to port miui v5 3.3.29
I've got most of it working on a touchwiz base
Here's a link to the rom that I have that will install and boot.
https://www.dropbox.com/s/q5h1k2utu2...1213.04.01.zip
not working:
-any connection to network (cdma, wifi, wimax)
-System menus default to upside-down orientation
-home and search buttons
working:
-everything that does not require network access
anyone that can help, if you have some insight into how to fix the few issues with this port I think we can make a good leap for miui on the E4GT.
Thanks to all
-Kobridge for the base
-Adhvanlt
-all E4GT devs
Note* I tried porting some of the libsec.ril files over from the 3.2.22 miui but no luck with getting anything to work, phone would not boot.
noriyori said:
I've been trying to port miui v5 3.3.29
I've got most of it working on a touchwiz base
Here's a link to the rom that I have that will install and boot.
https://www.dropbox.com/s/q5h1k2utu2...1213.04.01.zip
not working:
-any connection to network (cdma, wifi, wimax)
-System menus default to upside-down orientation
-home and search buttons
working:
-everything that does not require network access
anyone that can help, if you have some insight into how to fix the few issues with this port I think we can make a good leap for miui on the E4GT.
Thanks to all
-Kobridge for the base
-Adhvanlt
-all E4GT devs
Note* I tried porting some of the libsec.ril files over from the 3.2.22 miui but no luck with getting anything to work, phone would not boot.
Click to expand...
Click to collapse
that's awesome bro.. keep on the good work I would so try this but I need my phone to be connected I need internet lol with keep this rom in mind thx
#im first lol
Edited the title to show as a WIP. If some developers kick in and and work towards this it can stay here. If not we can try moving to Q&A.
Thanks
Friendly Neighborhood Moderator
Didn't download, but definitely will when Network connections start working. Keep it up!:good:
working deviantly on trying to get the radios to work... AdhvanIt has been a great help! It's such a nice interface, I want to make it work. off for tonight, but more tomorrow
what base are you using and where do u have the miui v5 from? and what what device?
maybe i can help if you can tell me where u got the v5 from
noriyori said:
I've been trying to port miui v5 3.3.29
I've got most of it working on a touchwiz base
Here's a link to the rom that I have that will install and boot.
https://www.dropbox.com/s/q5h1k2utu2...1213.04.01.zip
not working:
-any connection to network (cdma, wifi, wimax)
-System menus default to upside-down orientation
-home and search buttons
working:
-everything that does not require network access
anyone that can help, if you have some insight into how to fix the few issues with this port I think we can make a good leap for miui on the E4GT.
Thanks to all
-Kobridge for the base
-Adhvanlt
-all E4GT devs
Note* I tried porting some of the libsec.ril files over from the 3.2.22 miui but no luck with getting anything to work, phone would not boot.
Click to expand...
Click to collapse
Either from here http://en.miui.com/thread-2651-1-1.html, or also on xda there are some links if you search.
diablo311 said:
what base are you using and where do u have the miui v5 from? and what what device?
maybe i can help if you can tell me where u got the v5 from
Click to expand...
Click to collapse
I'm using the miui v5 for I9100 from here : http://en.miui.com/thread-2651-1-1.html
and for the base korbridge stock GB27 from here : http://forum.xda-developers.com/showthread.php?t=2059714
any help would be great!
noriyori said:
I'm using the miui v5 for I9100 from here : http://en.miui.com/thread-2651-1-1.html
and for the base korbridge stock GB27 from here : http://forum.xda-developers.com/showthread.php?t=2059714
any help would be great!
Click to expand...
Click to collapse
The network connections would probably work if you used an AOSP base rather than Touchwiz (and maybe solve some of your other issues). I recommend CyanogenMod as it is usually the easiest to port to.http://forum.xda-developers.com/showthread.php?t=2099881
Also, here is a JB Porting guide I wrote up awhile ago. http://db.tt/CYqnIv9p Hope this helps, I would love to see a fully functional MIUIv5 on our device.
Let me know if you need anymore help.
bilgerryan said:
The network connections would probably work if you used an AOSP base rather than Touchwiz (and maybe solve some of your other issues). I have never seen ANYBODY pull off a successful port onto a manufacturer's UI. I recommend CyanogenMod as it is usually the easiest to port to.http://forum.xda-developers.com/showthread.php?t=2099881
Also, here is a JB Porting guide I wrote up awhile ago. http://db.tt/CYqnIv9p Hope this helps, I would love to see a fully functional MIUIv5 on our device.
Let me know if you need anymore help.
Click to expand...
Click to collapse
Exactly what I was thinking. Thanks for bringing it up.
I didn't think I was the only one that thought that AOSP would have been a better base.
asd87 said:
I didn't think I was the only one that thought that AOSP would have been a better base.
Click to expand...
Click to collapse
I was thinking it would, I just didn't say anything.
Sent from my SPH-D710 using xda premium
Well he asked for help... That was the most helpful thing I could say
bilgerryan said:
Well he asked for help... That was the most helpful thing I could say
Click to expand...
Click to collapse
Yeah its true seeing as MIUI is an AOSP ROM.
asd87 said:
Yeah its true seeing as MIUI is an AOSP ROM.
Click to expand...
Click to collapse
The version he is using to port from is actually Touchwiz base. So not all MIUI is aosp.
im0rtalz said:
The version he is using to port from is actually Touchwiz base. So not all MIUI is aosp.
Click to expand...
Click to collapse
Yes but AOSP is much easier to port for someone just starting out was my point.
I just don't understand why anyone would use tw as a base. I'm not bashing the dev just as MIUI in itself is AOSP I would imagine that if you're going to port it that you'd use a stable AOSP base.
I was trying TW on the advice of Adhvanlt, I've been trying with TW, ASOP and CM bases. all to the same effect, I just can't find a good resource on getting CDMA to work on the rom. if anyone knows more about porting the CDMA components over to the new rom that would be great!
noriyori said:
I was trying TW on the advice of Adhvanlt, I've been trying with TW, ASOP and CM bases. all to the same effect, I just can't find a good resource on getting CDMA to work on the rom. if anyone knows more about porting the CDMA components over to the new rom that would be great!
Click to expand...
Click to collapse
You should probably use an MIUI from say the Sprint S3 or something along those lines and then it will already be there and working and you can work on the other issues... Just make sure the device you are porting from has the same screen resolution. It shouldn't be a problem however because your base ROM should already have the CDMA components. I'll have to take a look at this tomorrow when I get off work. I'm thinking the problem is somewhere else.
I wish you the best! I'm dying to try this ROM.
Hello,
i`m new here with a a100.
I´m ready to flash after root, unlock bootloader and install recovery.
So my question is here in the jungle of rom`s:
Witch rom is in the moment the best usefull and completly work with all stuff in the a100?
I read some threads but for me its very difficult to find out.
Please help.
frischeis
The CM10 builds from pio_masaki are running great. I recommend you to use it together with the gm_2.0 Kernel.
depredations ancrean
dtrail1 said:
The CM10 builds from pio_masaki are running great. I recommend you to use it together with the gm_2.0 Kernel.
Click to expand...
Click to collapse
Thanks for the information!!
I read a bit this tread before i start this post here.
Okay so i will try to install this:
Build 3 Linaro Tablet UI Modded FINAL
+
gapps-jb-20121011-signed.zip
right?
But what you mean with gm_2.0 kernel?
Is this included in the rom or i must flash this separately after install the rom+gapps?
Where can i download?
Sorry for my odd questions but i will do all right...
Hi frischeis and welcome!
Keep in mind the CM10 builds are not "officially" supported so there is the odd quirk here and there, overall all of the CM10 roms here are running pretty good. In terms of Pio's roms, he suggests using the kernel that is already packaged in his roms. The gm_2.0 kernel is a kernel that was developed with CM10 in mind: http://forum.xda-developers.com/showthread.php?t=1818924 and some say don't work well with his ROMS which is ok, because the prepackaged kernels in those ROMs are rock solid.
Also note that the CM10 roms are not ICS, they are Jellybean roms. There are still a few ICS roms out there if that is what you are interested in: These are listed from newest to oldest:
http://forum.xda-developers.com/showthread.php?t=2042725
http://forum.xda-developers.com/showthread.php?t=2008292
http://forum.xda-developers.com/showthread.php?t=1589034
http://forum.xda-developers.com/showthread.php?t=1629453
hardslog said:
Hi frischeis and welcome!
Keep in mind the CM10 builds are not "officially" supported so there is the odd quirk here and there, overall all of the CM10 roms here are running pretty good. In terms of Pio's roms, he suggests using the kernel that is already packaged in his roms. The gm_2.0 kernel is a kernel that was developed with CM10 in mind: http://forum.xda-developers.com/showthread.php?t=1818924 and some say don't work well with his ROMS which is ok, because the prepackaged kernels in those ROMs are rock solid.
Also note that the CM10 roms are not ICS, they are Jellybean roms. There are still a few ICS roms out there if that is what you are interested in: These are listed from newest to oldest:
http://forum.xda-developers.com/showthread.php?t=2042725
http://forum.xda-developers.com/showthread.php?t=2008292
http://forum.xda-developers.com/showthread.php?t=1589034
http://forum.xda-developers.com/showthread.php?t=1629453
Click to expand...
Click to collapse
He pretty much nailed it, if you want a stock ish ICS I'd suggest his keebers work, there's also very outdated but functional CM9 builds around if that's to your liking.
It isn't so much I don't recommend the GM kernel with my roms, it's that I know it has issues that didn't get sorted out and reflects as users reporting Rom issues that aren't Rom issues, and to report issues with the included kernel first. If your setup likes the GM kernel, by all means enjoy it, it's been a great addition to the development on this device.
It also wasn't meant for JB, it was a purely ICS kernel, however our ICS kernels worked on 4.1 with no modding required, so it worked with JB with no changes. Got lucky and Acer had stuff going that ICS didn't need but JB does. It should also work in 4.2 with minimal fuss.
Tapatalked from my HTC DNA
First: Thank you pio_masaki, hardslog and dtrail1!!
Sorry i made a false statement__i want of course JB 4.1.x not ICS.
Now i have ICS 4.0.3 ota and i want to make a step forward.
You guys will help me to make the decision.
So i will try KEBBERSROM_CMFLEX_V1.2 - Based on 4.1.2/CM10 (03-29-2013) foundet on hardslog post end.
Downloading...
I hope all works fine and i dont brike my tab
frischeis said:
First: Thank you pio_masaki, hardslog and dtrail1!!
Sorry i made a false statement__i want of course JB 4.1.x not ICS.
Now i have ICS 4.0.3 ota and i want to make a step forward.
You guys will help me to make the decision.
So i will try KEBBERSROM_CMFLEX_V1.2 - Based on 4.1.2/CM10 (03-29-2013) foundet on hardslog post end.
Downloading...
I hope all works fine and i dont brike my tab
Click to expand...
Click to collapse
Just read the instructions, don't flash stock roms, and you'll be fine. Enjoy it.:beer:
Tapatalked from my HTC DNA
So after flashing the first impression is:
GREAT!!!!!
So all in all __ awesome.
Thanks again!
For me the gm kernel works very well with CM10. Nothing to report until now - but I'm running for 2 days now.... Let's see.
Gesendet von meinem XT910 mit Tapatalk 2
I'd recommend flashing different ROMs to see what you like. I like baked, and cm10 but I like the dark theme and on baked you can switch from tab UK and phab. Which is nice. Should help my tab last a while longer....lol the gm kernels have worked for me for quite a while. He had an over clock to. 1.7 MHz too.... no wonder his tab died...lol I think I still have a copy on my SD card! They run best on the older boards. So the community says. But my new one likes it. Over clock to 1.2 and lionheart and boom. I did like green ICS. And cm9 was a consistent winner. Cm10 has come a long way...
Sent from my vangogh using xda app-developers app
Everybody talk about the gm_2.0 Kernel.
So i have flashed KEBBERSROM_CMFLEX_V1.2 - Based on 4.1.2/CM10.
So is this kernel included or i must flash separately?
One issue two times i have with this rom: i got this notification: "Trebuchet is closed" and i dont come on the homescreen.
Only over the status bar-settings-apps i reset trebuchet and it works normaly.
I dont no was happend...
frischeis said:
Everybody talk about the gm_2.0 Kernel.
So i have flashed KEBBERSROM_CMFLEX_V1.2 - Based on 4.1.2/CM10.
So is this kernel included or i must flash separately?
One issue two times i have with this rom: i got this notification: "Trebuchet is closed" and i dont come on the homescreen.
Only over the status bar-settings-apps i reset trebuchet and it works normaly.
I dont no was happend...
Click to expand...
Click to collapse
That launcher is buggy. Install and use Nova or Apex launcher and you won't have to worry about the force close.
Godmachine kernel is not in this ROM, it is packing ezTerrys version, which is the source for GodMachines kernel.
So technically it is almost the same but older and not tweaked as much. Solid kernel on this ROM.
Sent from my LG-P999 using xda premium
Thanks!
I will try out...
Also don't disable Google search bar in trebuchet or it'll constantly crash. Another launcher would be better but to stop that particular issue, leave Google search bar enabled.
Tapatalked from my HTC DNA
So i change the launcher.
Now i have nova launcher_works good.
In the moment no buggy situations.
:good:
Keep in mind though that this ROM isn't perfect. There are a few albeit very minor quirks. I have the issues in the OP of thread.
So what is your opinion about a Rom with JB 4.1.x
Witch one is your favorit?
Or better witch one has no bugs?
frischeis said:
So what is your opinion about a Rom with JB 4.1.x
Witch one is your favorit?
Or better witch one has no bugs?
Click to expand...
Click to collapse
There is no bugless 4.1 as there wasn't one made for us, it's all done by developers on their own time. It more like, which bugs can you live with, most any of the 4.1 are daily drivable.
Tapatalked from my HTC DNA
So which rom has the fewest bugs?
I now is a difficult question.
And - or a better question:
In which rom is the further development or is the tablet too old to develop it further?
Which rom is pushing forward?
I read in some threads development is terminated!??
--------------------------------------------------------------------
At the moment I must say I am very satisfied with the KEBBERSROM_CMFLEX_V1.2!
So thank you again for to work behind the stage!!!
Some stopped development, yes. I'm going to start 4.2.2 builds soon...
"soon" doesn't mean that these builds will be available soon. I have to start from scratch..
Gesendet von meinem XT910 mit Tapatalk 2