Hello,
Id appreciate any help with my problem:
After wishing to upgrade to JB from ARHD 9 (ICS), I flashed the correct Hboot and upgraded CWM to 5.8.4.0. However, when trying to flash the ARHD ROM, im getting a "failed installation" message after selecting the zip on the SD card. I thought it might be the boot.img i was using (from the download section), so used the one from the ROM zip instead. No luck. I erase the cache etc very time I can.
Any ideas to what might be the problem?
Thanks in advance
so you have a hboot 1.3* and you flashed the boot.img with fastboot command
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
then entered recovery and did a FULL wipe (also dalvik cache under the advanced tab)
then trying to install the rom.zip ?
install failed, redownload the rom, might be corrupted !
Mr Hofs said:
so you have a hboot 1.3* and you flashed the boot.img with fastboot command
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
then entered recovery and did a FULL wipe (also dalvik cache under the advanced tab)
then trying to install the rom.zip ?
install failed, redownload the rom, might be corrupted !
Click to expand...
Click to collapse
exactly - all steps followed. currently downloading it again...
Hi i just download the renovate_final2 zip file. And im not really sure how to install it to my phone. Can anyone correct me if im wrong?
1. copy the boot.img from the zip file to the fastboot folder
2. on my phone, go to fastboot usb (connect to comp)
3. on my computer, open cmd.
-type cd.. (enter) cd.. (enter) cd \fastboot (enter) fastboot flash boot boot.img (enter)
4. on my phone, go to recovery and wipe factory and cache. afterwards install the rom.
Are the steps correct?
Yes that's pretty much correct, just make sure do to a full wipe. To be sure wipe all manually too.
Wipe data/factory reset
Wipe caches, dalvik cache
Wipe data
Wipe system
The rest should be fine. And before you start wiping test the fastboot usb connection first so you won't run into trouble .... Phone in the bootloader and in the command window type :
Fastboot devices
Serial....yes ? Continue ! :thumbup:
as title says ive tried loads of stuff and seem to have hit a brick wall.
tried to root phone and thats when it went wrong
system info is
3.14.206.27 version
s on
boot is hboot 1.36.0000
boot loader unlocked
tried recovery from and it comes up with errors it wont flash files over can mount sd card and stuff like that
last night when i was tired i had formated all the storage in the phone got clockworkmod recovery 5.8.3.1 on it
wont recover the O2_001 3.14 Stock JB comes up with errors tried through adb and get an error about a buffer stack.
im running windows 7 any help would be great or if some one near nottinginham i can take the phone too and ither buy drinks or cash to sort it
First flash cwm 5.8.4.0
http://db.tt/Krlm4dPs
Put the file in the fastboot folder and rename it to recovery.img
Put the phone in the bootloader and open a command prompt inside the fastboot folder. Point in the folder, hold shift and right click the mouse - select open command window here
Then type
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then download a rom of your choice, open the rom.zip and copy the boot.img file to the fastboot folder.
Flash that too
Fastboot flash boot boot.img
Fastboot erase cache
Then enter the recovery and mount the sdcard as a mass storage device and copy the rom.zip to it.
Then make a full wipe....
factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache,data,system
Then install the rom.zip
Mr Hofs said:
First flash cwm 5.8.4.0
Put the file in the fastboot folder and rename it to recovery.img
Put the phone in the bootloader and open a command prompt inside the fastboot folder. Point in the folder, hold shift and right click the mouse - select open command window here
Then type
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
Then download a rom of your choice, open the rom.zip and copy the boot.img file to the fastboot folder.
Flash that too
Fastboot flash boot boot.img
Fastboot erase cache
Then enter the recovery and mount the sdcard as a mass storage device and copy the rom.zip to it.
Then make a full wipe....
factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache,data,system
Then install the rom.zip
Click to expand...
Click to collapse
thank you so much i got viper on the phone then copyd the o2 nandroid backup to the phone and it recoverd ok
Good !
CASE CLOSED !
Hi guys ,
For first i don't have many posts becouse my english is not very good and better is reading for me
I have problem with my HOX from few days and need yours help ...
I have branded phone from Orange , in these branded unit is only two languages so i need flashed it with any custom stocked rom ...
I download few diffrent roms and try to use them but always after flash my phone hang on logo ...
Some specyfic information :
Endeavoru PVT SHIP S-ON RL
HBOOT-1.36.0000
3.16.69.3 Stock Orange PL
I unlock bootloader whitout problem.
I flash recovery with CWM 6.0.2.7
I use Viper and Revolutionary HD roms without succes
Yes , I always use wipe / wipe dalvic / format / erace
Yes , I alvays flash boot from rom zip ...
And still have bootloop ...
Please help
Try this
Boot in the bootloader and flash the boot.img
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery
Factory reset
Wipe cache partition
Wipe dalvik cache
Format cache
Format data
Format system
Unhook the usb cable !!!
Then install the rom.zip and reboot
i flashed twrp but now im stuck at a formatting error called "mke2fs -t ext4 -b 4096 /dev/block/sdc46 29325304 process ended with ERROR: 1 Unable to wipe Data. Unable to format to remove encryption."
I am installing PE11 Exp. ROM and right after successfully flashing my PE ROM I am stuck at this format stage. Will I be needing to flash MIUI stock rom and uninstall TWRP or what now? I'm confused. Pls help.
th1nd said:
i flashed twrp but now im stuck at a formatting error called "mke2fs -t ext4 -b 4096 /dev/block/sdc46 29325304 process ended with ERROR: 1 Unable to wipe Data. Unable to format to remove encryption."
I am installing PE11 Exp. ROM and right after successfully flashing my PE ROM I am stuck at this format stage. Will I be needing to flash MIUI stock rom and uninstall TWRP or what now? I'm confused. Pls help.
Click to expand...
Click to collapse
Just changed the formatter in format settings (rm -rf instead of formatting) and it did install PE rom but my internal storage is inaccessible now .
Same issue here, haven't changed the format settings yet. Did you fix the issue with the internal storage?
Same problem
Laminesls said:
Same problem
Click to expand...
Click to collapse
Just need for more steps. Wipe dalvik, data, cache, system, vendor > Reboot recovery. Format data> Reboot recovery. Then start do flash rom and do other steps again. This happen because of encryption. If wipe data error, go in fastboot and type "fastboot -w" in ADB PC
Kirasu2080 said:
Just need for more steps. Wipe dalvik, data, cache, system, vendor > Reboot recovery. Format data> Reboot recovery. Then start do flash rom and do other steps again. This happen because of encryption. If wipe data error, go in fastboot and type "fastboot -w" in ADB PC
Click to expand...
Click to collapse
I am stuck as well. I followed the flash guide of the LiteUp MIUI V12.5 rom for the redemi note 8 pro: https://telegra.ph/Steps-01-01 And I got the error message after formatting the data. I asked on the telegram channel and they told me to change the file system to ext4, but that didn't worked. I tried your solution of wipe, then reboot recovery, fromat data, reboot recovery... flashed the rom again and then I rebooted straight to TWRP again. Can you help me?
Anyone know how to fix this I've tried to format data typed yes and this is what I get back using OnePlus 6t android 11 twrp 3.7.0
jamiehawman said:
Anyone know how to fix this I've tried to format data typed yes and this is what I get back using OnePlus 6t android 11 twrp 3.7.0
Click to expand...
Click to collapse
If you have PC, boot in fastboot mode and type "fastboot -w"
If you dont have PC, you can do some tricks to format:
- For flash new rom, Wipe necessary things > Reboot Recovery > Format data > Reboot Recovery > Flash rom
- Or you can go Wipe > Advanced Wipe > Data and Change File System to Ext4 (Or any default file system that your phone using)
i rebooted the twrp asked for password it decrypted so now il drag and drop magisk to phone do i need to drag and drop the twrp and that rom too
ive sorted it now well a g
Kirasu2080 said:
If you have PC, boot in fastboot mode and type "fastboot -w"
If you dont have PC, you can do some tricks to format:
- For flash new rom, Wipe necessary things > Reboot Recovery > Format data > Reboot Recovery > Flash rom
- Or you can go Wipe > Advanced Wipe > Data and Change File System to Ext4 (Or any default file system that your phone using)
Click to expand...
Click to collapse
uy sorted it for me i had to install a new rom install the new twrp and wallah all good
Back up your data if you still can.
You can try two methods below. Be careful: both will wipe our your data.
Method 1: boot into fastboot
fastboot erase userdata
fastboot erase cache
fastboot erase recovery
fastboot erase system
Try flashing a recovery
fastboot flash recovery [name-of-your-recovery.img]
Method 2: boot into recovery, if you still can
In Twrp / Orangefox / other recovery, format data -> yes;
Plus, you can wipe data, cache and other partitions in recovery.
wenyendev said:
Back up your data if you still can.
You can try two methods below. Be careful: both will wipe our your data.
Method 1: boot into fastboot
fastboot erase userdata
fastboot erase cache
fastboot erase recovery
fastboot erase system
Try flashing a recovery
fastboot flash recovery [name-of-your-recovery.img]
Click to expand...
Click to collapse
Just logged in to say thanks. I flashed a PixelOS Rom without removing the password on the old ROM, and the storage is encrypted. Failed to format data, TWRP bootloop, tried different methods, did not work until I found this post.