[Q] Troubles... Troubles Everywhere! - HTC One X

Hello people,
I bought an HTC ONE X and it just happened to be a:
HBOOT: 1.12.0000
SW: 2.17.707.3
RADIO: 2.1204.135.20
CID: HTC_044
and this effectively corresponds to some Eastern Asian region. Nevertheless, I had my phone sim-less until I unlocked it, installed CWM, then installed this custom ROM: http://forum.xda-developers.com/showthread.php?t=1868200 It looks exactly like the stock ROM, but deodexed, zipaligned, etc...
Now I tried 2 different SIM cards, non of which work, the device is stuck on Airplane mode, deep-sleep is never entered, and the CPU CORES just happen to be locked at 1.4-1.5GHz all the time which makes the phone hot! The phone is typically unusable now to me. I tried all various kinds of fixes, resets, nothing works, what I am planning to do now is to re-install the original RUU, but I'm wondering what will happen to my HBOOT version? Will it stay the same? Any thoughts are deeply appreciated as I have researched a lot!
I'm glad I still have my Galaxy Nexus, modding was even simpler than changing the X's wallpapers

Oh and can I reflash another RUU? Europe 2.17.401.2 which has the same RADIO, is that considered a downgrade?

ammyt said:
Oh and can I reflash another RUU? Europe 2.17.401.2 which has the same RADIO, is that considered a downgrade?
Click to expand...
Click to collapse
you can't downgrade man

matt95 said:
you can't downgrade man
Click to expand...
Click to collapse
How do I know, if that is a downgrade?
EDIT: BTW, I am not entirely sure that 2.1204.135.20 is my actual original radio, I noted it down after I flashed that custom ROM, and I see that there's another original RUU with the same base but a different radio 2.1204.123.18, could it be that this was my original ROM, and the new radio of the custom ROM messed things up?
If so, shouldn't I be downloading that other original ROM?!

you said that your current SW is 2.17.707.3, the RUU is 2.17.401.2...

matt95 said:
you said that your current SW is 2.17.707.3, the RUU is 2.17.401.2...
Click to expand...
Click to collapse
Oh so it is based on SW version, thank you!
The thing is, there are a lot of details to pay attention with this device, CID, RADIO, SW... and I coming from a one-click-boom Nexus is overwhelming!
Can you please take a look at the edit I have made to the last post? I really appreciate your replies.

ammyt said:
Oh so it is based on SW version, thank you!
The thing is, there are a lot of details to pay attention with this device, CID, RADIO, SW... and I coming from a one-click-boom Nexus is overwhelming!
Can you please take a look at the edit I have made to the last post? I really appreciate your replies.
Click to expand...
Click to collapse
well, you don't need to look at the radio. you can try by the way to run a RUU and see if that installs... you have to know only your CID
Code:
adb getvar cid
or
Code:
fastboot getvar cid
and that number has to be the same of the RUU that you want to run, cause there are different RUUs for different One X smartphones

matt95 said:
well, you don't need to look at the radio. you can try by the way to run a RUU and see if that installs... you have to know only your CID
Code:
adb getvar cid
or
Code:
fastboot getvar cid
and that number has to be the same of the RUU that you want to run, cause there are different RUUs for different One X smartphones
Click to expand...
Click to collapse
My RUU is HTC_044. How can I check what CID is in the RUU I'm downloading?

ammyt said:
My RUU is HTC_044. How can I check what CID is in the RUU I'm downloading?
Click to expand...
Click to collapse
here you wil find all HTC One X's RUUs... with that cid you should download the hTC_asia ones...

matt95 said:
here you wil find all HTC One X's RUUs... with that cid you should download the hTC_asia ones...
Click to expand...
Click to collapse
Yea I guess so, I'll download the ASIAN RUUs and figure out which works best.

ammyt said:
Yea I guess so, I'll download the ASIAN RUUs and figure out which works best.
Click to expand...
Click to collapse
download the latest one...let me know if that works
EDIT: don't forget that you have to fully charge your phone to install the RUU, just to be sure

matt95 said:
you said that your current SW is 2.17.707.3, the RUU is 2.17.401.2...
Click to expand...
Click to collapse
That's not a downgrade. The RUUs are for different regions. The 707 and 401 don't form part of the (chronological) version.

BenPope said:
That's not a downgrade. The RUUs are for different regions. The 707 and 401 don't form part of the (chronological) version.
Click to expand...
Click to collapse
yeah, not always but in this case it is a downgrade...try yourself and see

You're wrong.

I reflashed the latest stock ASIAN RUU but the problems still exist!!!
Stuck in airplane mode and no service!

Settings -> About -> SW information -> More -> Baseband version
It says Unknown

I don't always up posts, but when I do, I make sure I'm in some deep $hit before doing that
UP.

Please?

ammyt said:
Please?
Click to expand...
Click to collapse
at this point i don't know what is causing that... really really strange mate...

matt95 said:
at this point i don't know what is causing that... really really strange mate...
Click to expand...
Click to collapse
I've seen other people with the same issues and the same device! But the threads never end in a solution or any result, should i send it for repairs? I bootloader-unlocked it... warranty voided?

Related

[Q] How do I change my CID (and get EU RUU)

I have gotten myself a s-offed HTC One X from a local carrier with their firmware on it so I have no real hope of fast updates...
CIDgetter says in the top left I have CID of 11111111, yet going down to ro.aa.maincid says TELENZ001 - the carrier
Obviously I am s-offed and can get into the bootloader, how do I go about changing my CID and flashing a European RUU?
Have you tried just plugging in when in fastboot and running the RUU? If you really do have Super CID it'll just work
Sorry to ask this but have you contacted the guys in the s-off thread? They may be interested in hearing from you.
http://forum.xda-developers.com/showthread.php?t=1604300
Sent from my HTC One X using xda premium
Mind giving me a walk through guide Eddy? With a $600 toy I don't wanna mess anything up...
Will post in that thread badger and see if I can be of any use
Can you make a picture of the bootloader. To see what version HBOOT and radio you have. Maybe this is causing the issue.
P1n3apqlExpr3ss said:
Mind giving me a walk through guide Eddy? With a $600 toy I don't wanna mess anything up...
Will post in that thread badger and see if I can be of any use
Click to expand...
Click to collapse
Boot phone into fastboot, connect to PC, run RUU - not a lot else to do!
It'll either work or give you an error and reboot, with no changes made
Cid-11111111
hboot-0.43.0000
radio-1.1204.90.13
P1n3apqlExpr3ss said:
I have gotten myself a s-offed HTC One X from a local carrier with their firmware on it so I have no real hope of fast updates...
CIDgetter says in the top left I have CID of 11111111, yet going down to ro.aa.maincid says TELENZ001 - the carrier
Obviously I am s-offed and can get into the bootloader, how do I go about changing my CID and flashing a European RUU?
Click to expand...
Click to collapse
wawawawa!
Don't change your CID! a CID of 11111111 should be able to flash anything. SuperCID!
---------- Post added at 04:13 AM ---------- Previous post was at 04:12 AM ----------
Doombadger said:
Sorry to ask this but have you contacted the guys in the s-off thread? They may be interested in hearing from you.
http://forum.xda-developers.com/showthread.php?t=1604300
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Please!
Supaiku said:
wawawawa!
Don't change your CID! a CID of 11111111 should be able to flash anything. SuperCID!
Click to expand...
Click to collapse
I realise that ofcourse, its the maincid I want changing. I assume flashing the EU RUU will change that maincid?
On that note can anyone link me to the RUU I would want?
Oh and I did post in the s-off thread, skimmed through the pages since my post and no one seemed to say anything in regards to my post
P1n3apqlExpr3ss said:
I realise that ofcourse, its the maincid I want changing. I assume flashing the EU RUU will change that maincid?
On that note can anyone link me to the RUU I would want?
Oh and I did post in the s-off thread, skimmed through the pages since my post and no one seemed to say anything in regards to my post
Click to expand...
Click to collapse
Bump
P1n3apqlExpr3ss said:
Bump
Click to expand...
Click to collapse
If you have superCID then choose whatever RUU you want from HERE. It will not change your CID if you flash a particular RUU.
May I hook on to this.
My CID is O2__001. So I want to change it into 111111.
When I boot into fastboot and give 'fastboot oem writecid 11111111' it says:
FAILED (status read failed (Too many links).
I've tried different usb-ports, different usb-cables
Or is there another way to change the CID?
Bootloader is unlocked (HTCDev)
HBoot: 0.43.0000
Softwareversion is still 1.26.206.2, no updates available
Someone can help me?
Thanks in advance
almanbrother said:
May I hook on to this.
My CID is O2__001. So I want to change it into 111111.
When I boot into fastboot and give 'fastboot oem writecid 11111111' it says:
FAILED (status read failed (Too many links).
I've tried different usb-ports, different usb-cables
Or is there another way to change the CID?
Bootloader is unlocked (HTCDev)
HBoot: 0.43.0000
Softwareversion is still 1.26.206.2, no updates available
Someone can help me?
Thanks in advance
Click to expand...
Click to collapse
You can't without S-OFF, so you will only get updates from o2 or you can go custom
EddyOS said:
You can't without S-OFF, so you will only get updates from o2 or you can go custom
Click to expand...
Click to collapse
Thanks for your fast replay!
How do I change S-ON to S-OFF
You can't, and this is why the OP has a rare phone...
Go do some reading and you'll see why we can't get it
You're really fast! Thanks, I will search.
shadowboy23 said:
If you have superCID then choose whatever RUU you want from HERE. It will not change your CID if you flash a particular RUU.
Click to expand...
Click to collapse
Sorry for not just going ahead and flashing it but...
a) Do I need root/htcdev to flash? (im assuming not)
b) If I flash the EU RUU will I get OTA updates as theyre pushed out (im assuming so)
EddyOS said:
You can't, and this is why the OP has a rare phone..
Click to expand...
Click to collapse
Straight from HTC, that's why review phones sent out to media (at least in New Zealand) are also s-offd
P1n3apqlExpr3ss said:
Sorry for not just going ahead and flashing it but...
a) Do I need root/htcdev to flash? (im assuming not)
b) If I flash the EU RUU will I get OTA updates as theyre pushed out (im assuming so)
Straight from HTC, that's why review phones sent out to media (at least in New Zealand) are also s-offd
Click to expand...
Click to collapse
If you have S-OFF you don't have any need for HTCdev. Being superCID your phone can get OTA updates as long as you have stock recovery.
shadowboy23 said:
If you have S-OFF you don't have any need for HTCdev. Being superCID your phone can get OTA updates as long as you have stock recovery.
Click to expand...
Click to collapse
Thought that might be the case, as for flashing the RUU, is it the standard CWM way or with the fastboot files you mentioned in the video in your sig? Do the same instructions apply from it for me?
P1n3apqlExpr3ss said:
Thought that might be the case, as for flashing the RUU, is it the standard CWM way or with the fastboot files you mentioned in the video in your sig? Do the same instructions apply from it for me?
Click to expand...
Click to collapse
bump

[Q] Get back to stock using Ruu

So, I'm running Android Revolution HD 6.0 and I want to get back to stock...
My phone came with an Asian Rom of some sort and I have a Nandroid Backup.
I've tried to simply flash a Ruu "Europe_1.29.401.11" but it force close before any process start.
Do I have to get back to that stock, then relock the bootloader to do so???
Can I re-Unlock the bootloader if I need sometime??
It's my first HTC, I'm ok about using odin and rsd lite but never flashed any Ruu, so in HTC matters I'm pretty noob.
Thanks.
lucasmine said:
So, I'm running Android Revolution HD 6.0 and I want to get back to stock...
My phone came with an Asian Rom of some sort and I have a Nandroid Backup.
I've tried to simply flash a Ruu "Europe_1.29.401.11" but it force close before any process start.
Do I have to get back to that stock, then relock the bootloader to do so???
Can I re-Unlock the bootloader if I need sometime??
It's my first HTC, I'm ok about using odin and rsd lite but never flashed any Ruu, so in HTC matters I'm pretty noob.
Thanks.
Click to expand...
Click to collapse
You have to re-lock bootloader to flash official RUUs, and you can unlock it everytime you want using the unlock.bin you get from HTCdev (on your mail).
But you have to be sure you are using the right RUU
Read the threads relating to ruu carefully. Pretty important.
One thing. You can't use any ruu. Your phone did have a Asian rom initially and so you need the ruu corresponding to that area. And if phone was branded, you need the ruu specific to that brand.
So like if you your phone was from Hong Kong region, you need Hong Kong specific and carrier specifi(if your hox was branded ) ruu.
One more thing, u can only use the ruu of your current os version.
So if you're on 1.29.11, you can't use ruu for 1.29.7
See stickies for in android development section for ruu.
Although I think re locking bootloader should be enough and you should be good to use ruu, do check it.
Not sure if it would require flashing stock rom or stock recovery.
Last thing... Why use ruu? It's probably the last thing you should do unless it's a try to reclaim warranty.
I just want to get my phone to a stock rom, that was why...
but I guess I'll just stick to custom roms, since the Ruu stuf is actually pretty scarring... I tought it was simple to do, since fhasing via odin was always fast and safe...
But that's ok!
Thanks!!!
So, that was my shipped Ruu...
Can I flash an European over it??
PJ46IMG_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.26.707.4_Radio_1.1204
lucasmine said:
I just want to get my phone to a stock rom, that was why...
but I guess I'll just stick to custom roms, since the Ruu stuf is actually pretty scarring... I tought it was simple to do, since fhasing via odin was always fast and safe...
But that's ok!
Thanks!!!
Click to expand...
Click to collapse
It's very simple really.
1. Find the correct RUU
2. Flash stock recovery(not 100% sure if needed, I did it though)
3. Relock bootloader
4. Run RUU while still in fastboot.
Sent from my HTC One X using xda premium
lucasmine said:
So, that was my shipped Ruu...
Can I flash an European over it??
PJ46IMG_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.26.707.4_Radio_1.1204
Click to expand...
Click to collapse
No. You've already had it explains to you once lol. Ruu must match hardware. Read the threads
Sent from my HTC One X using Tapatalk 2
lucasmine said:
So, that was my shipped Ruu...
Can I flash an European over it??
PJ46IMG_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.26.707.4_Radio_1.1204
Click to expand...
Click to collapse
You can only flash the one that matches your region ... to find that out, you first have to find out your CID (something like HTC_001 or O2_002) out with THIS tool from the play store...and in the bootloader you will find the HBOOT version (0.94, 0.96 ...) ... post both here and ill let you know which RUU you need
lucasmine said:
So, that was my shipped Ruu...
Can I flash an European over it??
PJ46IMG_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.26.707.4_Radio_1.1204
Click to expand...
Click to collapse
You're likely going to need RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.28.707.10_Radio_1.1204.103.14_release_257076_signed which supports CID HTC__044.
afaik there is no 1.29 RUU for that region yet
OK!
Thanks..
as I said in the first post, I'm pretty noob in HTC...
just another question, can someone clarify what the numbers in the name of the RUU files means?
lucasmine said:
OK!
Thanks..
as I said in the first post, I'm pretty noob in HTC...
just another question, can someone clarify what the numbers in the name of the RUU files means?
Click to expand...
Click to collapse
RUU_ENDEAVOR_U_ICS_........................_X.XX.707.XX_Rad io_B.BBBB.BBB.BB_release_...........
X= software version
Y= region and/or branding
B= radio version
muamers said:
RUU_ENDEAVOR_U_ICS_........................_X.XX.707.XX_Rad io_B.BBBB.BBB.BB_release_...........
X= software version
Y= region and/or branding
B= radio version
Click to expand...
Click to collapse
Hmm... Mate all I see is Ys. I can't see any Xs or Bs.
Care to correct?
Electrostatic King said:
Hmm... Mate all I see is Ys. I can't see any Xs or Bs.
Care to correct?
Click to expand...
Click to collapse
Hahaha sorry, it was late The 777 above is the region and/or branding, here again the right way:
RUU_ENDEAVOR_U_ICS_........................_X.XX.YYY.XX_Rad io_B.BBBB.BBB.BB_release_...........
X= software version
Y= region and/or branding
B= radio version
edit ... If you still dont see, here:
The first 8 numbers are for software version and region/branding (region and branding are the numbers between the 2nd and 3rd dot, the other numbers are the software version) and the 2nd 10 numbers are the radio version
muamers said:
You can only flash the one that matches your region ... to find that out, you first have to find out your CID (something like HTC_001 or O2_002) out with THIS tool from the play store...and in the bootloader you will find the HBOOT version (0.94, 0.96 ...) ... post both here and ill let you know which RUU you need
Click to expand...
Click to collapse
How do I find the CID? I have rooted my phone by htcdev and I have not experienced the basic way to find the CID of my phone.
ri123 said:
How do I find the CID? I have rooted my phone by htcdev and I have not experienced the basic way to find the CID of my phone.
Click to expand...
Click to collapse
Sorry I misread your post with a link in it:thumbup:
Sent from my HTC Explorer A310e using XDA
I have software number 1.29.401.11, and hboot 1.12.0000
Please help me. What ruu i must to use.
Georgegalanos said:
I have software number 1.29.401.11, and hboot 1.12.0000
Please help me. What ruu i must to use.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=30222514&postcount=1677

Software Status: Modied?

I just got my M8 Developer Edition a couple of months ago. CID is BS_US002. MID: 0P6B12000. The only thing I did to the phone was to root it, nothing else. I didn't S-OFF or anything. The only thing before updating to Lollipop, SuperSU binary update failed, I didn't root again as Lollipop was around the corner and was going to do it anyway. While rooting Lollipop, I found at HBoot that Software status: Modified. What could be the reason for that? How can I fix that? I unrooted, did a factory reset and nothing changes.
Here are the full details on HBoot
Software status: Modified
UNLOCKED
M8_UL_CA PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.24.21331147A1.096
OPENDSP-V48.2.2-00564-M8974_FO.1211
OS-4.16.1540.8
eMMC-boot 2048 MB
Any idea how to fix that?
Thanks in advance!
It means changes have been made at some point to the system, e.g. it's been unlocked (as yours says)
EddyOS said:
It means changes have been made at some point to the system, e.g. it's been unlocked (as yours says)
Click to expand...
Click to collapse
It's not simply being unlocked as the device ships direct from HTC with the bootloader unlocked. That being said I have no idea what makes it switch to "Modified" status. Mine is S-OFF with custom rooted ROM (though it is sense-based and pretty close to stock) and custom recovery and it still displays as "Official".
-Duir- said:
It's not simply being unlocked as the device ships direct from HTC with the bootloader unlocked. That being said I have no idea what makes it switch to "Modified" status. Mine is S-OFF with custom rooted ROM (though it is sense-based and pretty close to stock) and custom recovery and it still displays as "Official".
Click to expand...
Click to collapse
I thought they came locked and you can just use the fastboot command like the GPe? Obviously not! In which case, something else has been changed for it to say that
EddyOS said:
It means changes have been made at some point to the system, e.g. it's been unlocked (as yours says)
Click to expand...
Click to collapse
It came unlocked, it's a developer edition.
-Duir- said:
It's not simply being unlocked as the device ships direct from HTC with the bootloader unlocked. That being said I have no idea what makes it switch to "Modified" status. Mine is S-OFF with custom rooted ROM (though it is sense-based and pretty close to stock) and custom recovery and it still displays as "Official".
Click to expand...
Click to collapse
Any idea how to fix that?
If you're not bothered about setting up the phone again you could reflash the new RUU and it should correct anything that was changed
EddyOS said:
If you're not bothered about setting up the phone again you could reflash the new RUU and it should correct anything that was changed
Click to expand...
Click to collapse
Is there a RUU available for 4.16.1540.8? Could you refer me to that? And could you please briefly tell me how to apply it -from fastboot or what?
Thanks in advance!
M_Shaaban said:
Is there a RUU available for 4.16.1540.8? Could you refer me to that? And could you please briefly tell me how to apply it -from fastboot or what?
Thanks in advance!
Click to expand...
Click to collapse
It's on the HTC US website, not got a link to hand as I'm in the UK, and to apply I've always preferred to do it in fastboot but you can start it when connected in Android if you prefer
EDIT: Here you go! http://dl3.htc.com/application/RUU_...G_20.68.4196.01_F_release_411207_signed_2.exe
EddyOS said:
It's on the HTC US website, not got a link to hand as I'm in the UK, and to apply I've always preferred to do it in fastboot but you can start it when connected in Android if you prefer
EDIT: Here you go! http://dl3.htc.com/application/RUU_...G_20.68.4196.01_F_release_411207_signed_2.exe
Click to expand...
Click to collapse
Thanks a lot!
EddyOS said:
It's on the HTC US website, not got a link to hand as I'm in the UK, and to apply I've always preferred to do it in fastboot but you can start it when connected in Android if you prefer
EDIT: Here you go! http://dl3.htc.com/application/RUU_...G_20.68.4196.01_F_release_411207_signed_2.exe
Click to expand...
Click to collapse
I understand you have included a link. But can I ask you so in the future I can find the RUU files myself on HTC Dev. For my developer edition with CID is BS_US002 and MID: 0P6B12000, which carrier should I choose? Brightstar or Brightstar US or what exactly? And which region should I select? USA or WWE or what exactly? Thanks a lot
M_Shaaban said:
I understand you have included a link. But can I ask you so in the future I can find the RUU files myself on HTC Dev. For my developer edition with CID is BS_US002 and MID: 0P6B12000, which carrier should I choose? Brightstar or Brightstar US or what exactly? And which region should I select? USA or WWE or what exactly? Thanks a lot
Click to expand...
Click to collapse
Not at the HTC Dev site, those are only Kernel Sources codes.
Most of the US RUUs are available here http://www.htc.com/us/support/rom-downloads.html
It's not on HTC Dev, it was originally on the HTC America support site somewhere...
BerndM14 said:
Not at the HTC Dev site, those are only Kernel Sources codes.
Most of the US RUUs are available here http://www.htc.com/us/support/rom-downloads.html
Click to expand...
Click to collapse
Thanks a lot! I didn't know that RUUs where available there.
M_Shaaban said:
Is there a RUU available for 4.16.1540.8? Could you refer me to that? And could you please briefly tell me how to apply it -from fastboot or what?
Thanks in advance!
Click to expand...
Click to collapse
See on your hboot readout in your first post where it say OS: 4.16.1540.8? You already have that firmware.
xunholyx said:
See on your hboot readout in your first post where it say OS: 4.16.1540.8? You already have that firmware.
Click to expand...
Click to collapse
Indeed but I don't think that was the issue at hand. He wanted to change the "Modified" status on his phone.
EddyOS suggested that he uses an RUU to turn everything back to normal, hence why he asked for the RUU.
BerndM14 said:
Indeed but I don't think that was the issue at hand. He wanted to change the "Modified" status on his phone.
EddyOS suggested that he uses an RUU to turn everything back to normal, hence why he asked for the RUU.
Click to expand...
Click to collapse
I have a problem, I can't install BusyBox (Pro) though I have root access and have been using root apps without a problem. Is this related to lollipop, or could this modified software status be a reason for that?
I can't help with busybox issues, never used it, sorry. Doesn't it give any errors? Does it have a log that you can view to see what the failure was?
BerndM14 said:
I can't help with busybox issues, never used it, sorry. Doesn't it give any errors? Does it have a log that you can view to see what the failure was?
Click to expand...
Click to collapse
No log actually. But Thank you very much

no services after upgrade the firemware

ok its not my phone its my friend's one
he is at&t one
s-off
unlocked bootloader
super cid
mid → European one from that thread
and the firmware is from vomar guides - 4.16.401.10 no red text
then install skydragon v1.6.5
no services and cant place calls
any help plz what i can do ?
What was your version number before flashing the Euro firmware?
If you want Euro firmware, its probably best to run the 401 RUU (and "fully convert" to Euro), instead of trying to run AT&T software with Euro firmware.
redpoint73 said:
What was your version number before flashing the Euro firmware?
If you want Euro firmware, its probably best to run the 401 RUU (and "fully convert" to Euro), instead of trying to run AT&T software with Euro firmware.
Click to expand...
Click to collapse
i dont remember the version
but can i flash the euro ruu and restore the phone to default and get ota updates in at&t one ?
cuz my phoen is super cid and euro mid ?
sorry for my english
mohamed7egazy said:
i dont remember the version
Click to expand...
Click to collapse
You should know this. Its important to know the current firmware version, before flashing a new one. Note these important facts in the future.
mohamed7egazy said:
but can i flash the euro ruu and restore the phone to default and get ota updates in at&t one ?
cuz my phoen is super cid and euro mid ?
Click to expand...
Click to collapse
After RUU, the phone will be fully converted to a Euro M8, including the ability to receive and install Euro OTA updates.
redpoint73 said:
You should know this. Its important to know the current firmware version, before flashing a new one. Note these important facts in the future.
After RUU, the phone will be fully converted to a Euro M8, including the ability to receive and install Euro OTA updates.
Click to expand...
Click to collapse
when i flash the ruu from sdcard its say failed and the phone died any help plz
mohamed7egazy said:
when i flash the ruu from sdcard its say failed and the phone died any help plz
Click to expand...
Click to collapse
You need to provide more info.
What RUU and where did you get it from?
What was the failure message in detail? Did any of the partitions install (if so, which ones? and on what partition did it fail?)? Or did it abort before any installation?
What does "phone died" mean? Did it go dark right after you tried to RUU? Did it simply run out of battery? Did you try charging it? Does the screen come on at all if you hold the power button for 30 seconds or more?
ruu from that site
https://xq55.ws/?p=34210
* its arabic blog
i cant remember the msg of fail - that was yesterday
phone died is no system but suddenly i find the system works *skydragon v1.6.5
i flashed the recovery again cuz the recovery is gone * twrp 2.8.7.0
and the firmware i flash * Firmware M8-SD 4.16.401.10 Modified WWE
no services !
and flash the Firmware M8-SD 4.16.401.10 Modified AT&T
no services too :/
cid is still super cid 11111111
mid is europe one 0P6B10000
mohamed7egazy said:
ruu from that site
https://xq55.ws/?p=34210
* its arabic blog
i cant remember the msg of fail - that was yesterday
Click to expand...
Click to collapse
I have no way of helping you with this, if you can't remember the reason it failed.
The link refers back to XDA, so it may be okay, but I really have no way of knowing if it really is or not.
The same RUU from reputable source is posted here: http://forum.xda-developers.com/showthread.php?t=2701376
Try running the RUU again, and note or do a screenshot of the error message(s).
mohamed7egazy said:
phone died is no system but suddenly i find the system works *skydragon v1.6.5
Click to expand...
Click to collapse
Again, that doesn't really tell me what happened. No system means you were stuck on the HTC logo screen? Able to go into bootloader? No recovery at all, or back to stock recovery (red triangle with exclamation).
mohamed7egazy said:
and flash the Firmware M8-SD 4.16.401.10 Modified AT&T
Click to expand...
Click to collapse
That is not the right version number for the AT&T version. Please clarify or correct it.
What you have now is a weird mix of hacked firmwares, custom ROM, etc.
So again, I think its best to do the official RUU to WWE (Euro) 401 "clean" fully stock baseline including all stock firmware, ROM, etc. Then see if that improves your signal problem, or troubleshoot from there.
ok i will install the ruu again
is that one is good ?
https://www.androidfilehost.com/?fid=24052804347796513
and thanx alot
mohamed7egazy said:
ok i will install the ruu again
is that one is good ?
https://www.androidfilehost.com/?fid=24052804347796513
Click to expand...
Click to collapse
That isn't an RUU.
You need to get the link for the section labelled RUU.
oh ok
that ?
https://www.androidfilehost.com/?fid=24052804347796512
mohamed7egazy said:
oh ok
that ?
https://www.androidfilehost.com/?fid=24052804347796512
Click to expand...
Click to collapse
Yes. Assuming you are using the SD card method to RUU.
ok thanks man
i sorry to take ur time i will install it and if i faced any proplem i will talk to u
mohamed7egazy said:
i sorry to take ur time
Click to expand...
Click to collapse
No worries, we're here to help; and I enjoy doing so.
Just be sure to give as much detail as possible when asking for help. It makes it much easier for us to help you.
man that i got after i install the ruu !
can u help me plz ?

Can't flash anything and phone goes into random reboots

I'm currently at loss for what to do now, heres what happened which I think started all these problems
-Was running ICE 5.5.1 stable
-Phone randomly reboots into HTC's white startup screen
-went into TWRP and wiped everything including internal storage
-flashed a new rom hoping it'll stop the reboots, and halfway during the flash the phone reboots itself even before completing
-now stuck with no OS and cant get into recovery
kernel: lk
product: htc_himauhl
version: 1.0
version-main: 3.42.708.3
boot-mode: download
version-baseband: 01.01_U11440801_97.04.60111G_F
version-bootloader: 1.0.0.0000
mid: 0PJA10000
cid: HTC__044
download mode shows "FILE /mnt/media_rw/ext_sd/0PJAIMG.zip; FILE NOT FOUND"
Anybody got any suggestions? Hopefully someone here knows something about this
digged around and found that I might need to flash 0PJAIMG.ZIP. Any kind helpful souls out there able to post the image for 3.42.708.3? Tried finding everywhere but couldn't find the relevant file in this forum
You can flash any 3.xx.708.xx firmware. Only the first and third set of numbers really matter. The second set is incremental version, forth set is times to push to devices.
Bear in mind that your device is rooted and unlocked bootloader so flashing stock isn't an option.
Beamed in by telepathy.
shivadow said:
You can flash any 3.xx.708.xx firmware. Only the first and third set of numbers really matter. The second set is incremental version, forth set is times to push to devices.
Bear in mind that your device is rooted and unlocked bootloader so flashing stock isn't an option.
Beamed in by telepathy.
Click to expand...
Click to collapse
aw shucks, is there any other way to get out of this problem?
12021656627z said:
aw shucks, is there any other way to get out of this problem?
Click to expand...
Click to collapse
Flashing an RUU is definitely the way to go, and will work just fine as long as your SKU and OS version match with the RUU you're attempting to flash.
Being rooted and/or having an unlocked bootloader will not affect the success/failure of flashing an RUU. Follow the instructions on the readme page and you should be golden.
computerslayer said:
Flashing an RUU is definitely the way to go, and will work just fine as long as your SKU and OS version match with the RUU you're attempting to flash.
Being rooted and/or having an unlocked bootloader will not affect the success/failure of flashing an RUU. Follow the instructions on the readme page and you should be golden.
Click to expand...
Click to collapse
I've tried and the only RUU that matches the SKU 708 is 1.32.708.15, is it possible to flash that on my current firmware? I've read that it's not compatible... or is it?
computerslayer said:
Flashing an RUU is definitely the way to go, and will work just fine as long as your SKU and OS version match with the RUU you're attempting to flash.
Being rooted and/or having an unlocked bootloader will not affect the success/failure of flashing an RUU. Follow the instructions on the readme page and you should be golden.
Click to expand...
Click to collapse
ruu.exe only?. These htc rules are confusing. There needs to be a sticky with the requirements for each state of the phone.
12021656627z said:
I've tried and the only RUU that matches the SKU 708 is 1.32.708.15, is it possible to flash that on my current firmware? I've read that it's not compatible... or is it?
Click to expand...
Click to collapse
too old. You can't downgrade.
12021656627z said:
aw shucks, is there any other way to get out of this problem?
Click to expand...
Click to collapse
Probably not. Only HTC can fix it afaik. I reckon your attempts to flash will fail.
Beamed in by telepathy.
12021656627z said:
I've tried and the only RUU that matches the SKU 708 is 1.32.708.15, is it possible to flash that on my current firmware? I've read that it's not compatible... or is it?
Click to expand...
Click to collapse
You've read correctly. You need a 3.xx.708.xx RUU (EDITED: See Flippy498's correction below). It may be possible to get on from a paid repository of firmwares, but I don't have any recommendations there.
While HTC can almost assuredly help you (for a fee), it may be worthwhile to look into the paid service mentioned in the readme thread to see if that is more cost-effective.
shivadow said:
You can flash any 3.xx.708.xx firmware. Only the first and third set of numbers really matter. The second set is incremental version, forth set is times to push to devices.
Click to expand...
Click to collapse
computerslayer said:
You've read correctly. You need a 3.xx.708.xx RUU.
Click to expand...
Click to collapse
No, not only the first and the third number of the firmware version matter for S-ON phones. The X and the SKU in X.XX.SKU.YY need to match between the RUU and the phones current firmware. Only Y is allowed to differ if the phone is S-ON.
And a RUU actually flashes everything back to stock. So this
shivadow said:
Bear in mind that your device is rooted and unlocked bootloader so flashing stock isn't an option.
Click to expand...
Click to collapse
isn't true at all.
shivadow said:
ruu.exe only?. These htc rules are confusing. There needs to be a sticky with the requirements for each state of the phone.
Click to expand...
Click to collapse
There is a sticky with all needed information for RUUs: The ReadMe thread. (But as always, if you call something "ReadMe" you can rest assured that no one really reads it...) Flashing RUU.exe files can be a pain (just like using htc_fastboot)*. It's easier to use the SD card method. The ReadMe thread even explains how to get the *.zip out of the *.exe.
* I actually never had issues with them but I faced enough users here on XDA and on Handy-FAQ who just couldn't get them to work.
12021656627z said:
I've tried and the only RUU that matches the SKU 708 is 1.32.708.15, is it possible to flash that on my current firmware? I've read that it's not compatible... or is it?
Click to expand...
Click to collapse
As mentioned before by the others, that RUU is too old.
shivadow said:
Only HTC can fix it afaik. I reckon your attempts to flash will fail.
Click to expand...
Click to collapse
computerslayer said:
It may be possible to get on from a paid repository of firmwares, but I don't have any recommendations there.
Click to expand...
Click to collapse
How about Llabtoofer's RUU service as suggested in the ReadMe thread? Or Easy-Firmware if you prefer to own the RUU? (If you choose the latter make sure not to download a RUU with "combined_signed" in its naming. Those are custom made and only flashable with S-OFF. And don't forget to make it available for others, afterwards. )
Flippy498 said:
How about Llabtoofer's RUU service as suggested in the ReadMe thread? Or Easy-Firmware if you prefer to own the RUU? (If you choose the latter make sure not to download a RUU with "combined_signed" in its naming. Those are custom made and only flashable with S-OFF. And don't forget to make it available for others, afterwards. )
Click to expand...
Click to collapse
Thanks for the suggestions! Sad to know that Easy-Firmware is only available for S-OFF users, it could've been great if its flashable on S-ON. Looks like the only way out of is Llabtoofer's RUU service
12021656627z said:
Thanks for the suggestions! Sad to know that Easy-Firmware is only available for S-OFF users, it could've been great if its flashable on S-ON. Looks like the only way out of is Llabtoofer's RUU service
Click to expand...
Click to collapse
Easy-Firmware is usable for S-ON users. You just need to make sure that you don't download a "combined_signed" RUU. The ones with only "signed" should be just fine (e.g. "0PJAIMG_HIMA_UHL_M60_SENSE70_MR_hTC_Asia_HK_3.42.708.3_Radio_01.01_U11440801_97.04.60111G_F_release_471142_signed_2_4_2.zip" or "0PJAIMG_HIMA_UHL_M60_SENSE70_MR_hTC_Asia_HK_3.42.708.3_Radio_01.01_U11440801_97.04.60111G_F_release_471142_signed_2_4.zip").
computerslayer said:
You've read correctly. You need a 3.xx.708.xx RUU. It may be possible to get on from a paid repository of firmwares, but I don't have any recommendations there.
While HTC can almost assuredly help you (for a fee), it may be worthwhile to look into the paid service mentioned in the readme thread to see if that is more cost-effective.
Click to expand...
Click to collapse
shivadow said:
ruu.exe only?. These htc rules are confusing. There needs to be a sticky with the requirements for each state of the phone.
too old. You can't downgrade.
Probably not. Only HTC can fix it afaik. I reckon your attempts to flash will fail.
Beamed in by telepathy.
Click to expand...
Click to collapse
Any rough estimates on how much will the repair by HTC cost?
Flippy498 said:
Easy-Firmware is usable for S-ON users. You just need to make sure that you don't download a "combined_signed" RUU. The ones with only "signed" are just fine.
Click to expand...
Click to collapse
Oh! Sorry I must've misread your post then. I'll consider giving it a shot!
Flippy498 said:
No, not only the first and the third number of the firmware version matter for S-ON phones. The X and the SKU in X.XX.SKU.YY need to match between the RUU and the phones current firmware. Only Y is allowed to differ if the phone is S-ON.
Click to expand...
Click to collapse
I'm sorry for spreading bad information. Thanks for the correction.

Categories

Resources