[Q] Stuck at Boot screen..Any solution ? - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

i i tried innstalling the Cyanogenmod 10 from the rom manager
and when it was time to reboot it was stuck on the cyanogenmod logo then i formatted the phone system and everything thinking it would solve my problem..now im stuck on the boot screen saying "Samsung Galaxy Siii"
any solutions please ?

I would say reboot to recovery and install the nandroid you should have made before installing a custom rom... If ya dont have a backup its time to learn some odin and adb. Or try flashing a different rom, either way learning adb and odin is not a bad idea.

Do a factory reset. Wipe cache/dalvik.

misterarby said:
i i tried innstalling the Cyanogenmod 10 from the rom manager
and when it was time to reboot it was stuck on the cyanogenmod logo then i formatted the phone system and everything thinking it would solve my problem..now im stuck on the boot screen saying "Samsung Galaxy Siii"
any solutions please ?
Click to expand...
Click to collapse
If you followed the directions to install CM then you wiped your dalvik cache, when you do this it takes the phone quite a bit longer to boot than normal. It is possible that it was just rebuilding the cache, or also possible something didnt flash correctly and it was actually stuck, just thought you should be aware of the delay in startup. Your second step of formatting system effectively deleted whatever OS was there so its no wonder you didnt get past the boot logo at this point, there was nothing left to get to. Reflashing the ROM should fix you up assuming it was a good download to begin with. I would say forget about using rom manager to install roms (and probably not be alone in saying this), flash it from a .zip in the recovery manually. If not you are probably looking at flashing back to rooted stock with odin as smokin suggested. Another alternative would be if you have an external sd and some way to copy to it you could just redownload CM and flash it from the external storage. Also as smokin mentioned you should have a backup, if not bet you will next time .

You checked "yes this is a question"
Guess where it belongs?
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thanks
FNM

Related

[Q] Help, won't boot any custom roms.

After trying to flash a new rom after being on AOKP M1 for a little while (http://forum.xda-developers.com/showthread.php?t=1875923) the phone got stuck at the Black and white Samsung Galaxy SIII screen and didn't boot upon hitting reboot system now on cwm. Tried again, tried reflashing and the whole 9 yards wouldn't boot at all. So I turned to odin and went to the prerooted latest JB build (http://forum.xda-developers.com/showthread.php?t=1949687) and then reflashed touch cwm and tried to reflash the rom. Same problem. So, I odin'd back to the non rooted UVDLJA. Rerooted and reflashed cwm and blahblahblah. I said hmm maybe it's the rom, I then tried to flash this rom (http://forum.xda-developers.com/showthread.php?t=1993934) and when I tried to reboot system now after the process; again the phone got stuck at the black and white Samsung Galaxy SIII screen and did not boot. The phone works fine when I odin it to stock builds but refuses to boot custom roms. Can someone help me here? I haven't been able to find a solution for days. :crying:
PS I'm a noob, don't kill me lol
edit: forgot to include I have the Tmobile variant
Did you wipe data and cache when you flashed the new rom?
nyyankees1237 said:
After trying to flash a new rom after being on AOKP M1 for a little while (http://forum.xda-developers.com/showthread.php?t=1875923) the phone got stuck at the Black and white Samsung Galaxy SIII screen and didn't boot upon hitting reboot system now on cwm. Tried again, tried reflashing and the whole 9 yards wouldn't boot at all. So I turned to odin and went to the prerooted latest JB build (http://forum.xda-developers.com/showthread.php?t=1949687) and then reflashed touch cwm and tried to reflash the rom. Same problem. So, I odin'd back to the non rooted UVDLJA. Rerooted and reflashed cwm and blahblahblah. I said hmm maybe it's the rom, I then tried to flash this rom (http://forum.xda-developers.com/showthread.php?t=1993934) and when I tried to reboot system now after the process; again the phone got stuck at the black and white Samsung Galaxy SIII screen and did not boot. The phone works fine when I odin it to stock builds but refuses to boot custom roms. Can someone help me here? I haven't been able to find a solution for days. :crying:
PS I'm a noob, don't kill me lol
edit: forgot to include I have the Tmobile variant
Click to expand...
Click to collapse
a few questions:
and i can verify the issue is something on your end, because the ROM you tried was mine, and nobody has had that issue (not booting it)
do this...
1. make sure you have the latest version of clockwordmod, don't use twrp
2. re-download my ROM (just for sake of not adding any other variables to your issue, because mine should boot)
3. put ROM on external SD card
before continuing... take a quick look at my thread here in QA titled "flashing ROMs correctly every time" .... so you can get some instruction on verifying MD5 of the download... don't worry, the thread will explain that you...
now proceed
4. boot to recovery
5. do a factory reset - 3 times do this, just to be thorough. people will say you don't need to, but like i said, just for the sake of removing variables
6. go to mounts and storage, format system 3 times - (yes, through recovery as well)
7. flash ROM, and reboot
EDIT*** i will say this, ALWAYS format system when flashing a new ROM
cobraboy85 said:
a few questions:
and i can verify the issue is something on your end, because the ROM you tried was mine, and nobody has had that issue (not booting it)
do this...
1. make sure you have the latest version of clockwordmod, don't use twrp
2. re-download my ROM (just for sake of not adding any other variables to your issue, because mine should boot)
3. put ROM on external SD card
before continuing... take a quick look at my thread here in QA titled "flashing ROMs correctly every time" .... so you can get some instruction on verifying MD5 of the download... don't worry, the thread will explain that you...
now proceed
4. boot to recovery
5. do a factory reset - 3 times do this, just to be thorough. people will say you don't need to, but like i said, just for the sake of removing variables
6. go to mounts and storage, format system 3 times - (yes, through recovery as well)
7. flash ROM, and reboot
EDIT*** i will say this, ALWAYS format system when flashing a new ROM
Click to expand...
Click to collapse
thanks for the info, will try this all out soon. I've been flashing roms for years now and have never run into anything like this, and as previously stated, this didn't occur solely with your rom which has me thinking something has happened to the phone itself. will get back to you soon and once again thank you
chucktdriscoll said:
Did you wipe data and cache when you flashed the new rom?
Click to expand...
Click to collapse
of course, wiped data, cache, & delvik
nyyankees1237 said:
of course, wiped data, cache, & delvik
Click to expand...
Click to collapse
my point is...
coming from a cm based ROM, or aokp, whatever you said... you would want to format system as well.
nyyankees1237 said:
After trying to flash a new rom after being on AOKP M1 for a little while (http://forum.xda-developers.com/showthread.php?t=1875923) the phone got stuck at the Black and white Samsung Galaxy SIII screen and didn't boot upon hitting reboot system now on cwm. Tried again, tried reflashing and the whole 9 yards wouldn't boot at all. So I turned to odin and went to the prerooted latest JB build (http://forum.xda-developers.com/showthread.php?t=1949687) and then reflashed touch cwm and tried to reflash the rom. Same problem. So, I odin'd back to the non rooted UVDLJA. Rerooted and reflashed cwm and blahblahblah. I said hmm maybe it's the rom, I then tried to flash this rom (http://forum.xda-developers.com/showthread.php?t=1993934) and when I tried to reboot system now after the process; again the phone got stuck at the black and white Samsung Galaxy SIII screen and did not boot. The phone works fine when I odin it to stock builds but refuses to boot custom roms. Can someone help me here? I haven't been able to find a solution for days. :crying:
PS I'm a noob, don't kill me lol
edit: forgot to include I have the Tmobile variant
Click to expand...
Click to collapse
I was having some of the same issues. I downloaded XquiziT's Superwipe and ran it by installing from external sd card. I ran it three times to clear everything out, then I wiped data, cache and the rest three times.
No probs for me after that.
Will definitely give that a try as well! Thank you! Will post my results when the holiday is over.
Happy thanksgiving
Sent from my SGH-T999 using xda app-developers app

[Q] Help! Stuck in bootloop

Hi guys! Happy New Year!!
I have a problem, I run MiNCO v6 ROM and till yesterday it worked properly, but i found the volume a little bitt low, so i installed Vomer's patch audiov5, available in his modding thread and designed for MiNCO ROMs, which didn't gave me any problem with past MiNCO ROM versions live v5 or v4.
So I went to recovery, installed mod from .zip and rebooted; after 5 minutes the device was still blocked on a screen saying: "Android Upgrade, Application starting..." or something like that; so i decided to remove battery, and put it back again. From this moment the phone is stuck in boot loop, if i turn it on it block on MINCO logo.
I can access recovery using fastboot mode so i tried to restore from a Nandroid i had on the device but recovery said there were no files, i don't know why.
SO what can i do?? I have original ROM zip saved on the memory of the device, maybe i could wipe cache and flash fresh ROM?? Do i need to wipe also data and dalvik?? Other solutions??
Thanks.
Wipe data. Flash a known good rom. I don't see why you needed to make a thread when you could get to recovery.
063_XOBX said:
Wipe data. Flash a known good rom. I don't see why you needed to make a thread when you could get to recovery.
Click to expand...
Click to collapse
Sry if I just wanted to be shure of what I'm doing.

Help with Installing CleanROM.

Hi, I will have my hands on this tablet very soon and want to use the Cleanrom that is listed in a thread here. This will be my first time doing this and have been searching around for a guide. I have read a few bits and pieces but would like someone to explain in a few steps so i can get this right the first time.
I found a guide to Root it at rootgalaxynote.com but would like to understand how to install the CleanROM.
Hello,
You have to install TWRP Recovery first, then you need to copy Rom.zip to storage and then flash it using Recovery, dont forget about Wipe.
52224489
WeedyEyes said:
Hello,
You have to install TWRP Recovery first, then you need to copy Rom.zip to storage and then flash it using Recovery, dont forget about Wipe.
Click to expand...
Click to collapse
I havent installed anything yet as i will be receiving it for christmas. Not 100% sure on process so was posting here hoping someone could explain the process a bit more in laymans terms as this will be the first time i will be doing this. i understand you have to root the device so you can change the ROM, wasnt sure on what to do after that.
reetzy said:
I havent installed anything yet as i will be receiving it for christmas. Not 100% sure on process so was posting here hoping someone could explain the process a bit more in laymans terms as this will be the first time i will be doing this. i understand you have to root the device so you can change the ROM, wasnt sure on what to do after that.
Click to expand...
Click to collapse
All you need is to Install Custom Recovery to change ROM, that will allow you to do anything you want with your device (such as System Backup/Restore, installing .zip packages, and etc.) read thread about TWRP so you can find everything you need to know.
But notice the fact you'll lose your warranty installing custom roms, as I know there is no way to change warranty bit back to 0 yet.
All information you need to know about Custom Roms is already there.
WeedyEyes said:
All you need is to Install Custom Recovery to change ROM, that will allow you to do anything you want with your device (such as System Backup/Restore, installing .zip packages, and etc.) read thread about TWRP so you can find everything you need to know.
But notice the fact you'll lose your warranty installing custom roms, as I know there is no way to change warranty bit back to 0 yet.
All information you need to know about Custom Roms is already there.
Click to expand...
Click to collapse
Thanks Weedy :good: Once i get this tablet i will give it a go.
Can you give me a link to the TWRP thread you refereed to thanks.
http://forum.xda-developers.com/showthread.php?t=2515656
Here you can find TWRP. I would recommend flashing the ".0"version because some people are having problems with the newer one
Worked fine for me , just did the same process as you
Sent by my Note 10.1 2014
benni2903 said:
http://forum.xda-developers.com/showthread.php?t=2515656
Here you can find TWRP. I would recommend flashing the ".0"version because some people are having problems with the newer one
Worked fine for me , just did the same process as you
Sent by my Note 10.1 2014
Click to expand...
Click to collapse
Thanks, all i need is Santa to hurry up now lol.
Are you sure you wanna get P600 not P605?
Make sure you get the right version, whether Quality or Exnyos. I had a freeze until I got the right version.
Sent from my SM-P600 using Tapatalk
In this guide what is this file for ?
Step 3. Download and unzip P600_Autoroot.zip:
rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/
Edit: Should i do this first before the TWPR?
Build says CleanRom 1.0 but all apps are still present
My build says CleanRom 1.0 but I still have all of the apps that others say are removed such as Sketchbook. My note was rooted using the AutoRoot file with Odin and then the stock recovery was flashed. I then used the twrp 3.0 file and booted into recovery. I then installed CleanRom (without reset per instructions) and the device rebooted and everything worked except all of the apps were still there. I then tried to re-flash CleanRom and perform the wipe but I then got stuck on the Samsung splash screen to no avail. I booted into recovery and tried re-flashing the CleanRom zip to no avail. All I could do to get this thing booted was to flash the auto-root file again in Odin, re-flash twrp, and install cleanrom again from the recovery but all of the apps are still there. Before I did any of this I had a bunch of the bloatware either frozen or uninstalled in Titanium but now some of those apps show lines through them in TBP. Either way, my device is showing CleanRom 1.0 under the build but I really don't think it is... any ideas on how to fix this?
Hi i'm a newbie on android
i've tried to install this rom a lot of time but unsuccessfully at any time
i've tried all the solutions i found here but none were successfull
i am under TWRP 2.6.3.0
my tablet is rooted but after the rom flash ,when i reboot ,just after the "galaxy note edition 2014" logo there's a black screen
the only way to repair is to flash with the mk1 stock rom after or to restore my old version saved with TWRP
can someone help ?
thanks
shoresteve626 said:
My build says CleanRom 1.0 but I still have all of the apps that others say are removed such as Sketchbook. My note was rooted using the AutoRoot file with Odin and then the stock recovery was flashed. I then used the twrp 3.0 file and booted into recovery. I then installed CleanRom (without reset per instructions) and the device rebooted and everything worked except all of the apps were still there. I then tried to re-flash CleanRom and perform the wipe but I then got stuck on the Samsung splash screen to no avail. I booted into recovery and tried re-flashing the CleanRom zip to no avail. All I could do to get this thing booted was to flash the auto-root file again in Odin, re-flash twrp, and install cleanrom again from the recovery but all of the apps are still there. Before I did any of this I had a bunch of the bloatware either frozen or uninstalled in Titanium but now some of those apps show lines through them in TBP. Either way, my device is showing CleanRom 1.0 under the build but I really don't think it is... any ideas on how to fix this?
Click to expand...
Click to collapse
Before flashing your rom perform a factory reset in twrp and format /data. All your apps will be deleted and you should be fine if you are stuck on the samsung boot logo it might help to boot into recovery and format /cache and dalvik cache
Sent by my Note 10.1 2014
Messed it up even more
benni2903 said:
Before flashing your rom perform a factory reset in twrp and format /data. All your apps will be deleted and you should be fine if you are stuck on the samsung boot logo it might help to boot into recovery and format /cache and dalvik cache
Sent by my Note 10.1 2014
Click to expand...
Click to collapse
So, I did the factory reset in twrp and then formatted the data. Naturally, everything was lost but when I went to install CleanRom it was no longer on the internal memory due to the format... but I did copy it to the Ext SD Card. MY problem is that twrp won't install the zip from the sd card. Each time it says its unable to mount "/data" even though I'm going into "advanced settings" and placing the check mark. I re-flashed twrp and tried using file manager to move the file to the internal storage but came up with the same problem. Also, I can't place the check on mount data for some reason. Now, my tablet starts to boot up but hangs on the samsung screen before the boot animation. Basically, its like there isn't any firmware on it and I tried re-doing the auto-root and stock recovery but thats a no go as well. Is this thing toasted?
shoresteve626 said:
So, I did the factory reset in twrp and then formatted the data. Naturally, everything was lost but when I went to install CleanRom it was no longer on the internal memory due to the format... but I did copy it to the Ext SD Card. MY problem is that twrp won't install the zip from the sd card. Each time it says its unable to mount "/data" even though I'm going into "advanced settings" and placing the check mark. I re-flashed twrp and tried using file manager to move the file to the internal storage but came up with the same problem. Also, I can't place the check on mount data for some reason. Now, my tablet starts to boot up but hangs on the samsung screen before the boot animation. Basically, its like there isn't any firmware on it and I tried re-doing the auto-root and stock recovery but thats a no go as well. Is this thing toasted?
Click to expand...
Click to collapse
Boot into TWRP and click "Restore Back Up" (Cannot remember exact verbiage) . Find where it says internal storage and press it and it will switch to a drop down and you can choose "External SD" Then go back and and it should be going to External SD instead of internal SD when you select install
Make sure you factory re-set. For safety, I advance wipe but I don't think that is necessary.
You may need to re-flash recovery if you're unable to access it.
shoresteve626 said:
So, I did the factory reset in twrp and then formatted the data. Naturally, everything was lost but when I went to install CleanRom it was no longer on the internal memory due to the format... but I did copy it to the Ext SD Card. MY problem is that twrp won't install the zip from the sd card. Each time it says its unable to mount "/data" even though I'm going into "advanced settings" and placing the check mark. I re-flashed twrp and tried using file manager to move the file to the internal storage but came up with the same problem. Also, I can't place the check on mount data for some reason. Now, my tablet starts to boot up but hangs on the samsung screen before the boot animation. Basically, its like there isn't any firmware on it and I tried re-doing the auto-root and stock recovery but thats a no go as well. Is this thing toasted?
Click to expand...
Click to collapse
Your device is not toasted I always have the Rom zip on the root directory of the device so formatting /data will not affect the rom zip. If you cant get it working then you might need to flash a firmware via odin and after that copy the rom on the internal root directory. Resetting your device should not format the whole internal storage so you can install the rom afterwards. Good luck mate
Sent by my Note 10.1 2014
Thanks for all the help!
benni2903 said:
Your device is not toasted I always have the Rom zip on the root directory of the device so formatting /data will not affect the rom zip. If you cant get it working then you might need to flash a firmware via odin and after that copy the rom on the internal root directory. Resetting your device should not format the whole internal storage so you can install the rom afterwards. Good luck mate
Sent by my Note 10.1 2014
Click to expand...
Click to collapse
After the holiday (and many stressful attempts) I was finally able to re-boot the device and get past the splash screen. Opening Kies seemed to "kick" past the splash screen even though it said my device wasn't compatible with Kies. Anyway, I flashed the stock recovery, wiped, reset, flashed original firmware via Odin, flashed TWRP again, and then installed the CleanRom zip. Phew... it's FINALLY over with no issues and running smooth. I think the problem came in with TWRP not wiping correctly even though it said it did. I do appreciate all of the help and advice as you guys are life-savers!
Exnyos?
sdelliott31 said:
Make sure you get the right version, whether Quality or Exnyos. I had a freeze until I got the right version.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
How do you know with version you have?
jkitsmiller said:
How do you know with version you have?
Click to expand...
Click to collapse
Wifi Only Version = P600 = Exynos processor
Lte = P605 = Snapdragon800
Gesendet von meinem SM-P600 mit Tapatalk
When I installed with TWRP 2.6.3.3 & 2.6.3.1 I got the write permission denied and then I tried with 2.6.3.0 it got hung while installing CleanRom 1.5R2. Does anyone know how to resolve this issue? Thanks

[Q][SOFT BRICK] Weird...

So this is the weirdest "brick" I have ever experienced. My phone was working flawlessly with a TWRP recovery and a slightly modded mostly stock ROM. I was playing around modding the stock MMS app, SecMms.apk, and flashing it through recovery. One of these flashes did not complete successfully. I got to the lockscreen, but it would not respond. And there was no network connection. So I figured something got screwed up. I rebooted into recovery and flashed a stock ROM. Boot loop. I got back into recovery and performed a factory data reset, erased everything, flashed a stock ROM. Boot loop. I downloaded a completely stock ROM with stock recovery, stock everything. Got into download mode and flashed it through ODIN. Boot loop. Well, actually, the initial boot got a screen where I could see the taskbar with time and no-service indicator; the rest of the screen was black for a minute; then I got a popup window stating that "Process system is unable to continue" and asking if I wanted to wait of close it. Then it boot looped. I tried booting without a SIM card and an external SD card - same result.
So, to recap - I can get to Download Mode, and ODIN, but anything I flash, including completely stock ROM boot loops.
I am at a loss as to what to try next. If anyone has ideas, I'm willing to try just about anything. I'm gonna take it to T-Mo store tomorrow to see if they can do anything with it...
re: phone issues
6uPMAH said:
So this is the weirdest "brick" I have ever experienced. My phone was working flawlessly with a TWRP recovery and a slightly modded mostly stock ROM. I was playing around modding the stock MMS app, SecMms.apk, and flashing it through recovery. One of these flashes did not complete successfully. I got to the lockscreen, but it would not respond. And there was no network connection. So I figured something got screwed up. I rebooted into recovery and flashed a stock ROM. Boot loop. I got back into recovery and performed a factory data reset, erased everything, flashed a stock ROM. Boot loop. I downloaded a completely stock ROM with stock recovery, stock everything. Got into download mode and flashed it through ODIN. Boot loop. Well, actually, the initial boot got a screen where I could see the taskbar with time and no-service indicator; the rest of the screen was black for a minute; then I got a popup window stating that "Process system is unable to continue" and asking if I wanted to wait of close it. Then it boot looped. I tried booting without a SIM card and an external SD card - same result.
So, to recap - I can get to Download Mode, and ODIN, but anything I flash, including completely stock ROM boot loops.
I am at a loss as to what to try next. If anyone has ideas, I'm willing to try just about anything. I'm gonna take it to T-Mo store tomorrow to see if they can do anything with it...
Click to expand...
Click to collapse
Go into recovery mode and do a complete wipe including "Factory Reset", wipe data, wipe system,
wipe cache, wipe dalvik cache and then if you have a working nandroiod backup restore it.
If you don't have a nandroid backup then go into download mode and flash the official stock
firmware for the N900T phone from http://SamMobile.com
Either one of these two options will get your phone back up and running.
Good luck!
I have already done all of the above, and...no go. Even stock firmware from SamMobile boot loops. Unfortunately, I do not have a nandroid backup, so that's the one thing I cannot do.
6uPMAH said:
I have already done all of the above, and...no go. Even stock firmware from SamMobile boot loops. Unfortunately, I do not have a nandroid backup, so that's the one thing I cannot do.
Click to expand...
Click to collapse
Google zedomax you will find his website for unrooting note 3. Will walk you thru with ever step.
It is no longer rooted after I have flashed stock firmware/ROM from SamMobile. Believe me , I have tried all the known methods of returning this phone to stock/unroot. I have flashed through recovery when I had custom recovery. I have flashed through ODIN. So far I have been unable to fix the issue. I am thinking my internal storage is corrupt, or the partition is corrupt. Anyone knows of a way to rebuild/repartition internal storage?
6uPMAH said:
It is no longer rooted after I have flashed stock firmware/ROM from SamMobile. Believe me , I have tried all the known methods of returning this phone to stock/unroot. I have flashed through recovery when I had custom recovery. I have flashed through ODIN. So far I have been unable to fix the issue. I am thinking my internal storage is corrupt, or the partition is corrupt. Anyone knows of a way to rebuild/repartition internal storage?
Click to expand...
Click to collapse
Did you try the "boot loop fix" flashable? It's essentially a script that sort of recreates the efs partition in recovery. It's been linked a few times in the twrp thread, and there may be a thread dedicated to the topic (search for "brick loop") - I don't have the links handy though, apologies.
The mans right^ that helped me out through my "soft brick". Totally out of the blue. Wasnt even messing around with anything I didnt knew I was doing
Sent from my SM-N900T using Tapatalk
Anybody has a link? I've searched, but there's nothing specific to Note 3 TMO...
6uPMAH said:
Anybody has a link? I've searched, but there's nothing specific to Note 3 TMO...
Click to expand...
Click to collapse
The method is outlined in the OP of this thread but the flashable version of what is outlined there can be found in this thread - hope that helps!
Thanks. I'll give it a go after work.
UPDATE: All is well in the world again. Thanks everyone for all your help. Thanks dwitherell ! The thread you pointed me to was the solution!

[Q] Encryption Failed

First Yes i have searched and i found several posts but none had enough information or ended up with directing the op to the de-brick thread I feel its not bricked and I don't want to run into more problems.
Here is how it goes down
using 4.2.1 Rom
using CWRM 6.0.3.1
I tried to encrypt my phone (don't ask me why as if i could go back in time i wouldn't have tried it)
So first it would only boot to the screen that says encryption failed factory reset and try to encrypt again and has a restart button at first nothing worked even the Rom UI would crash at this point and the restart (software button) on the screen was unresponsive. I then went into recovery and tried to load a recovery and it could not mount /data as it read as it was secured. So i went and formatted it and was successful with restoring a backup Although as soon as it booted again it brought me right to that same screen?
I am going to try to start over with a new Rom installation while i wait for a reply.
I just hope i can get it done simply without Odin or connecting it to my PC as i tend to not have good luck with that. IDK whats up with my PC.
Anyway if a simple Rom install fixes it ill be happy but something is still there saying i want to encrypt it or IDK what is causing it to go to the encryption failed page when I have formatted all but /sdcard (i was afraid to unless I'm told) I know everything else is fine /system /data /cache are all replaced by the Rom so i know its OK to format them but /sdcard is all the data on the phone so I'm not afraid of losing music ringtones pictures etc if i do need to format /sdcard but i want to be told i should first
also please ask me for any in formation you may need i want to fix this and also i need to go find a Rom so also a Rom suggestion is fine too (if its going to help otherwise I'm going to find a basic 4.2.1 Touchwiz based Rom and flash that
Please Flash UVDMD5 version of Root66 via Odin.
Perseus71 said:
Please Flash UVDMD5 version of Root66 via Odin.
Click to expand...
Click to collapse
THANKS I tried flashing a fresh ROM after formatting everything now im in a boot loop and as it not bricked (soft bricked anyway) i was hoping a new route66 via Odin would be my main option.
Now as far as it goes on updating to 4.3 what file should i flash via Odin? should i use T999_UVDMD5 to get it working again then use T999_UVUEMJC to update to 4.3 (how i went from ICS to JB so would it be the same to KK ,4.3,) or can i just do a single Odin to T99_UVUEMJC so I u can be ready to use 4.3 roms. I just want to make sure because if I don't' have to use a 4.13 route 66 ROM to com back from this boot loop can I skip the step of using Odin to UN soft brick my 4.1.2 and go straight to 4.3.
I just want to know the best way to go about eventually being able to load 4.3 roms on this phone more because they are easier to find (as in more developed at this time) and to be update
I appreciate all your help and in case any ROM devs are reading this I love your work each and every one of you make this place better i wish i had the (first smarts) and second the time to mod for myself but over the years you guys are just awesome and i wish i was at any of your levels (all who post or even mod for themselves) as if i knew what you did i would not be in the predicament either and if i can fix it i will be pleased with myself as i bet most or all devs could fix this issue in 5-10 min where you can see Ive been at it days! Thanks in advance for any future help and most of all so far thank to you Perseus71 for helping me start
Never EVER flash UVUEMJC. Let's first get you back working with UVDMD5. Once that's achieved, I will get you 4.3 by another way.
For now, If you are right now on that bootloop/softbrick with just the UVDMD5, then great. If not go back to recovery, factory reset and wipe the cache and Re-flash UVDMD5 via Odin. This time, in Odin, make sure to uncheck Auto Reboot.
Once Odin has succeeded, Flash a custom Recovery such as TWRP via Odin. After that is done, reboot to recovery. Wipe Dalvik and Cache and then reboot normal.
[Q] Encryption Unsuccessful (Android 4.1)
I have partitioned my phone incorrectly. Phone is asking for a reset..
I deleted the /data and /sdcard because I formatted the internal storage and every time I reboot, I get a Encryption Unsuccessful message and it tells me to reset phone. I did but same message. What should I do??
Here's my phone: Cherry Mobile Omega HD (IQ6A) / Xolo A1000 / Alps H100
Android JB, Custom ROM, Rooted, TWRP
5"
8Gb External
Wrong Device forum Bud.

Categories

Resources