I don't have the post count to ask this question so I hope I'm not violating forum rules posting here. As per the title, I'm trying to install the latest nightly of CM10 on my T999v SGS3. I've installed CWM Touch (latest build) and copied the latest nightly to the root of my phone. I then boot into recovery and then factory reset, wipe cache, wipe dalvik cache and then proceed with the installation.
I then get this error.
assert failed: getprop("ro.product.device") == "E:Error in /sdcard/cm-10-20121014-NIGHTLY-d2tmo.zip
(status 7)
Installation aborted.
Would anybody knowledgeable with this be able to direct me to a solution please?
Thanks.
My phone is rooted
My previous ROM was FREEGS3v6 rom with the Trinity Kernel
All I can think of is a bad download. The error it's throwing you says you don't have the correct device/file for the device, so if you have a T-Mobile S3 all I can think of is a bad download.
I have a WIND version so T999v, and after reading the CM10 thread a few WIND users have successfully flashed it. I redownloaded the file but still the same error message.
what recovery are you using? try updating to 6.0.1.2 and try again
It sounds like you have a modified build.prop by the assertion error being thrown. Try flashing another rom first and then reflash cm
Edit: if you want check your build prop and verify that the line ro.product.device has d2tmo as its value
Sent from my SGH-T999 using xda app-developers app
I checked out that value with build prop editor and it was d2can so do I change it to d2tmo or flash another rom first?
I doubt this will be of much help but who knows. I am a tmo S3 user who just rooted and updated to CM10 (cm-10-20121011-EXPERIMENTAL-d2tmo-M2) yesterday. I had the same error that you did but all I did to fix it was update to ClockworkMod v6.0.1.2 and then it installed fine. I doubt the v6.0.1.2 would work but Touch would not. I was just happy that I didn't have to mess with the build.prop or anything else to resolve. Good luck.
X-Nemesis said:
I don't have the post count to ask this question so I hope I'm not violating forum rules posting here. As per the title, I'm trying to install the latest nightly of CM10 on my T999v SGS3. I've installed CWM Touch (latest build) and copied the latest nightly to the root of my phone. I then boot into recovery and then factory reset, wipe cache, wipe dalvik cache and then proceed with the installation.
I then get this error.
assert failed: getprop("ro.product.device") == "E:Error in /sdcard/cm-10-20121014-NIGHTLY-d2tmo.zip
(status 7)
Installation aborted.
Would anybody knowledgeable with this be able to direct me to a solution please?
Thanks.
My phone is rooted
My previous ROM was FREEGS3v6 rom with the Trinity Kernel
Click to expand...
Click to collapse
I had the same problem as you and this is what I did.
I rooter my phone. Am I then install CWM Touch and do the wipes and install CM10 but all this without restart my phone. And this time I did not have the error.
I was having the same problem, so I reverted back to factory stock. Then I rooted my phone and installed cm10 and it worked fine.
Related
So I am an HTC owner but doing some root & ROM work for a friend of mine. Normally, I load a ROM onto the SD card, boot into recovery, wipe, flash zipped ROM from SD card, reboot, enjoy. However, The GS3 I am working on does not recognize the SD card within recovery. Everytime I try to flash a ROM (CM10 & MIUI thus far) none of them work. I get the following when trying to flash:
-- Installing /sdcard/miuiandroid_d2tmo_jb-3.1.11.zip
Finding Update package
Opening update package
Installing Update
assert failed: getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product) == "d2tmo"
E: Error in /sdcard/miuiandroid_d2tmo_jb-3.1.11.zip
(Status 7)
Installation Aborted
Now, this tells me that my download is corrupt somehow. However, I get this exact same message when trying to flash CM10. Furthermore, both ROMs were acquired directly from the dev download links. Has anyone else had a similar problem and can provide a solution?
Update CWM. Link in my signature.
Aerowinder said:
Update CWM. Link in my signature.
Click to expand...
Click to collapse
Wow! I feel like a moron! I use TWRP on my LTEvo so it has been a long time since I've even touched CWM. Looks like the update did the trick. Flashed MIUI and accompanying gapps perfectly! Thank you!
One more question, is there a generic gapps that I can flash across ROMs or no? For instance, I have the gapps that was posted next to MIUI. However, I'd like to see how CM10 runs. Am I able to flash the gapps posted with MIUI or is there a specifically designed gapps file for CM10? I ask because with the Evo gapps are generic and can be interchanged with AOSP ROMs.
I tried to flash to Intergalactic Rom and it failed, so I tried to flash it again, but when I was wiping the files I accidentally wiped my SD card with my nandroid. So does anyone have one they can upload or another idea? Thanks.
CipherC233 said:
I tried to flash to Intergalactic Rom and it failed, so I tried to flash it again, but when I was wiping the files I accidentally wiped my SD card with my nandroid. So does anyone have one they can upload or another idea? Thanks.
Click to expand...
Click to collapse
what was the error message?
if we find your problem is not fixable via flashing a different rom, etc, you could consider downloading and flashing stock firmware in odin and starting over
Reason for most failed installs is outdated recovery or bad download. Just download a ROM again and put it on your ext ad card. Flash an updated recovery in Odinand then flash the new ROM.
Sent from my SAMSUNG-SGH-I747 using xda premium
Alright, sorry I was in a rush to get back to work.
"assert failed: getprop( … ) == "d2att" E: Error in /emmc/Intergalactic_v2.8.zip "
That is the error that I am getting when I try to flash it. I searched the page and found that the error is because my CWM is out-of-date.
It flashed the second time I tried which is what bricked the phone, so now I can't upgrade my CWM via the two ways that I have found online which both require a working ROM.
If I can flash another ROM with CWM 5.5 that would be great. If anyone knows of a ROM that is compatible please let me know.
CipherC233 said:
Alright, sorry I was in a rush to get back to work.
"assert failed: getprop( … ) == "d2att" E: Error in /emmc/Intergalactic_v2.8.zip "
That is the error that I am getting when I try to flash it. I searched the page and found that the error is because my CWM is out-of-date.
It flashed the second time I tried which is what bricked the phone, so now I can't upgrade my CWM via the two ways that I have found online which both require a working ROM.
If I can flash another ROM with CWM 5.5 that would be great. If anyone knows of a ROM that is compatible please let me know.
Click to expand...
Click to collapse
here's a link to a cwm recovery flashable update. this is cwm 6.0.2.3. should work. flash it in cwm then "reboot recovery"
http://d-h.st/8qP
and if you want to make sure it's done right, here's a compilation of the best way to root/flash/backup your device. stick with these methods and you'll have far fewer problems
http://forum.xda-developers.com/showthread.php?t=2179330
Thanks, but the update was a No-Go. It's giving me the getprop error again. I'll just suck it up and start over.
CipherC233 said:
Thanks, but the update was a No-Go. It's giving me the getprop error again. I'll just suck it up and start over.
Click to expand...
Click to collapse
odin back to stock. here is a link to stock firmware with root already injected. download the correct carrier version and flash in odin. http://forum.xda-developers.com/showthread.php?t=1739426
install rom manager (http://download.clockworkmod.com/recoveries/RomManager.apk). flash recovery via rom manager. i think latest release is 6.0.3.0. make sure rom is still on your phone.
boot into recovery and make a backup before you do anything else.
then wipe data
wipe cache and dalvik
install rom
after successful boot, wait 10 minutes and reboot.
---------- Post added at 11:41 PM ---------- Previous post was at 11:29 PM ----------
While you're back at the beginning, I would take the time to backup your imei/efs stuff. Better safe than sorry. This is a step that many skip.
This is a beginning to end guide
http://forum.xda-developers.com/showthread.php?t=2179330
Cheers
I am not exactly sure where things started to go wrong. I just recently installed the latest ROM of Task650's Jellybean 4.2.2
I have been trying to update to the latest ROM and I recieve:
[assert failed: getprop("ro.product.device") == "E: Error in /external_sd/ROMs and Gapps /aokp_JB_4.2.2_d2att-ota-eng.task650-4.26.2013.zip
(Status 7)]
I have looked up the issue and updated the Kernel and updated to the latest CWM and still get the same error.
Another thing I have noticed is that I cannot flash any other ROMs like CyanogenMod or anything
I also noticed in my devices folders, that I basically have mulitple of the same folders in multiple directories... I am not sure if this is from flashing too many times... I have never had this many problems with my device before. I like to have everything updated, which I have been able to do before, but now I can't do anything.
Can I get some advice on what to do?
if you have an i747 (d2att), was that a d2att cwm update you applied? it will say in the updater-script (in the recovery zip) what model it's for.
each time you flash a 4.2.2 ROM you're likely adding the multiple folders. a known issue. follow the link in my signature for some more details on this down in post #2 of that thread. essentially, back everything up (either to a micro sd card or your PC) and perform a full wipe before flash (including /system and /data + /media) to avoid this problem. we'll work on that once you've got this first issue fixed.
Fixed my issue!
I'm guessing I had flashed the wrong CWM:good: for my phone.
I have scoured tons of threads looking for help but the basic solutions don't seem to be working. I'm at a loss on where to turn, so I'm starting a new thread.
I am trying to install CM10.0 stable from the Cyanogenmod wiki (cm-10.0.0-d2att, md5 checks out using HashTab) using Odin v3.07). The SD Card has been properly formatted using 3rd party software. I have Clockwork 6.0.1.2 installed (and thank goodness I figured out the backup/restore feature)
When I go to
install zip from sdcard -> choose zip from external sdcard -> cm-10.0.0-d2att.zip
I get:
Code:
assert failed: getprop(ro.product.device") == "d2att" || getprop(ro.build.product") == "d2att"
E:Error in /external_sd/cm-10.0.0-d2att.zip
(Status 7)
Installation aborted.
I know a bit of programming, so I assume that it thinks my phone (or at least the current software installed) is not for the d2att version. My phone is the Rogers version, so it's the correct one.
I don't know what to do from here. I've heard so many great things about CM10 but it's such a pain to get going, apparently. Any help would be appreciated. I've spent a long time tonight searching and reading to see if there is another way around it, and frankly I'm starting to get confused. Lots of different info and different programs that all say something else of that something else is wrong.
Thank you all for half-listening to me rant, and I appreciate any help you fine folks can throw me
Good night, I'm off to bed.
zeropaladn said:
I have scoured tons of threads looking for help but the basic solutions don't seem to be working. I'm at a loss on where to turn, so I'm starting a new thread.
I am trying to install CM10.0 stable from the Cyanogenmod wiki (cm-10.0.0-d2att, md5 checks out using HashTab) using Odin v3.07). The SD Card has been properly formatted using 3rd party software. I have Clockwork 6.0.1.2 installed (and thank goodness I figured out the backup/restore feature)
When I go to
install zip from sdcard -> choose zip from external sdcard -> cm-10.0.0-d2att.zip
I get:
Code:
assert failed: getprop(ro.product.device") == "d2att" || getprop(ro.build.product") == "d2att"
E:Error in /external_sd/cm-10.0.0-d2att.zip
(Status 7)
Installation aborted.
I know a bit of programming, so I assume that it thinks my phone (or at least the current software installed) is not for the d2att version. My phone is the Rogers version, so it's the correct one.
I don't know what to do from here. I've heard so many great things about CM10 but it's such a pain to get going, apparently. Any help would be appreciated. I've spent a long time tonight searching and reading to see if there is another way around it, and frankly I'm starting to get confused. Lots of different info and different programs that all say something else of that something else is wrong.
Thank you all for half-listening to me rant, and I appreciate any help you fine folks can throw me
Good night, I'm off to bed.
Click to expand...
Click to collapse
There are two reasons for your error. Yes the rogers phone and the at&t are identical phones but at a recovery level they aren't your phone will have a d2can recovery installed and the error is telling you you need to have the d2att recovery.
Also your recovery is out of date.
I don't have a link for clockwork mod but if you go here
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.5.0.0-d2att.tar
This is the latest twrp for d2att. Flash this through Odin and it'll overwrite your current recovery. You'll be good to go after that.
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
There are two reasons for your error. Yes the rogers phone and the at&t are identical phones but at a recovery level they aren't your phone will have a d2can recovery installed and the error is telling you you need to have the d2att recovery.
Also your recovery is out of date.
I don't have a link for clockwork mod but if you go here
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.5.0.0-d2att.tar
This is the latest twrp for d2att. Flash this through Odin and it'll overwrite your current recovery. You'll be good to go after that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Just a tip, you don't have to go through ODIN to flash a recovery if you already have a recovery installed. There are recovery flashable files to install which are super easy to use. Just like flashing a ROM. They can also be found on TRWPs website.
Cheers.
flexfulton said:
Just a tip, you don't have to go through ODIN to flash a recovery if you already have a recovery installed. There are recovery flashable files to install which are super easy to use. Just like flashing a ROM. They can also be found on TRWPs website.
Cheers.
Click to expand...
Click to collapse
The twrp site provides .tar and .img
The cwm site provides just the .img
Neither one flashable in recovery.
Because he's on a d2can the phone recognizes it and won't let him flash through ROM manager and goo manager to a d2att.
@zeropaladn In case you don't want to odin.
This is the flashable recovery for d2att twrp
http://forum.xda-developers.com/attachment.php?attachmentid=1879305&d=1365812877
In case you want to stick with clockworkmod and don't want to Odin.
Flashable cwm 6.0.3.1 http://forum.xda-developers.com/attachment.php?attachmentid=1888710&d=1366136727
Sent from my SGH-I747 using xda app-developers app
Here is about every way we know to install recovery
http://forum.xda-developers.com/showthread.php?t=1903913
I flashed the new CWM and the d2att recovery and it worked! I didn't know that even though the phone is physically the same it wouldn't take the d2att rom from a a2can recovery. Got it working and TouchWiz is GONE! Thanks to everyone (i found the button don't worry)
1. I own three Samsung Galaxy S3 SGH-i747m. I was able to successfully Odin flash TWRP or ClockworkMod recoveries on all of them. Then install my preferred CyanogenMod 10.1.3 stable.
2. Problem is on the third phone purchased from Rogers network late 2012 so firmware is likely a bit more outdated. I can only flash CyanogenMod 10.0.0 on it. Anything newer fails
3. 20130812 gapps installs just fine.
4. Below are the phone details and errors in TWRP and ClockworkMod as I've tried using both recoveries.
5. I desperately need help to figure out what is stopping CyanogenMod 10.1.3 from installing on this phone. I used the exact same package on the other two phones and worked great.
About Phone
Android version 4.1.2
Baseband version I747MVLUEMK5
Kernel version 3.0.48-cyanogenmod-ge67063c
[email protected] #1
Tue Nov 13 08:44:53 PST2012
CPU ARMv7 Processor rev 4 (v7I)
Memory 1622 MB
CyanogenMod version 10.0.0-d2att
Build date Tue Nov 13 08:31:49 PST 2012
Build number cm_d2att-userdebug 4.1.2 JZO54K eng.20121113.083104 test-keys
ClockworkMod Recovery v6.0.4.5
Finding update package...
Opening update package...
Installing update...
E:Error in /data/media/cm-10.1.3-d2att.zip
(Status 6)
Installation aborted.
Team Win Recovery Project v2.6.3.1
Wipe Davlik and Cache
Installing '/external_sd/cm-10.1.3-d2att.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
E:Error executing updater binary in zip '/extern
Error flashing zip '/external_sd/cm-10.1.3-d2att
Updating partition details
Failed...
exhaust2000 said:
1. I own three Samsung Galaxy S3 SGH-i747m. I was able to successfully Odin flash TWRP or ClockworkMod recoveries on all of them. Then install my preferred CyanogenMod 10.1.3 stable.
2. Problem is on the third phone purchased from Rogers network late 2012 so firmware is likely a bit more outdated. I can only flash CyanogenMod 10.0.0 on it. Anything newer fails
3. 20130812 gapps installs just fine.
4. Below are the phone details and errors in TWRP and ClockworkMod as I've tried using both recoveries.
5. I desperately need help to figure out what is stopping CyanogenMod 10.1.3 from installing on this phone. I used the exact same package on the other two phones and worked great.
About Phone
Android version 4.1.2
Baseband version I747MVLUEMK5
Kernel version 3.0.48-cyanogenmod-ge67063c
[email protected] #1
Tue Nov 13 08:44:53 PST2012
CPU ARMv7 Processor rev 4 (v7I)
Memory 1622 MB
CyanogenMod version 10.0.0-d2att
Build date Tue Nov 13 08:31:49 PST 2012
Build number cm_d2att-userdebug 4.1.2 JZO54K eng.20121113.083104 test-keys
ClockworkMod Recovery v6.0.4.5
Finding update package...
Opening update package...
Installing update...
E:Error in /data/media/cm-10.1.3-d2att.zip
(Status 6)
Installation aborted.
Team Win Recovery Project v2.6.3.1
Wipe Davlik and Cache
Installing '/external_sd/cm-10.1.3-d2att.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
E:Error executing updater binary in zip '/extern
Error flashing zip '/external_sd/cm-10.1.3-d2att
Updating partition details
Failed...
Click to expand...
Click to collapse
Download total commander from the play store. Then open the rom using that app. Rom/META-INF/com/google/android and edit updater-script and remove the line with the smileys and the at&t code thing. then save and flash the rom. I experienced the same problem before, but that technique fixed it.
Weird because your baseband is 4.3 and your OS is 4.1.2.
http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=RWC#firmware
Did not work
So far none of the suggestions made a difference. I'm still stuck with CyanogenMod 10.1.0. Is it possible to get more help on this? Step by step instructions would be much appreciated. I'm stuck Thanks!
I would use the latest version of Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att Download the zip version and install it from CWM.
Boot into CWM, then wipe cache, system, data, dalvik, and flash the ROM. Boot into the ROM, set things up, boot into CWM, flash GAPPs.
PhilZ Touch 6 also fails
I followed these steps flashed and booted into PhilZ Touch 6 but still errors out
PhilZ Touch 6
Clockworkmod v6.0.4.7
Installing: /storage/sdcard1/cm-10.1.3-d2att.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.bootloader") == "I747UCDLK3" ||
getprop("ro.bootloader") == "I747UCDMG2"
getprop("ro.bootloader") == "I747MVLDLK4"
getprop("ro.bootloader") == "I747MVLDMF1"
getprop("ro.bootloader") == "I747MUMBLK3"
getprop("ro.bootloader") == "I747MUMBLL1"
E:Error in /storage/sdcard1/cm-10.1.3-d2att.zip (Status 7)
Installation aborted
press any key to continue.
I also tried editing the updater-script text file by deleting the first line but it errors out too with (Status 6).
assert(getprop("ro.product.device") == "d2att" || getprop("ro.build.product") == "d2att");
I don't want to give up as the cm-10.0.0-d2att.zip on it has problem connecting to camera. The camera cannot be used. Thanks please let me know what else I can try.
Instincts tell me that I have to get to the bottom of why my baseband is 4.3 and OS is 4.1.2 just like what Audit13 commented. I'm still puzzled and stuck why that is the case and how to get around "force" flashing a newer cm-10.1.13-d2att. Help please!
You bootloader isn't listed in the updater script. Try flashing CM11.
CM-11 flashed but new problems introduced
audit13 said:
You bootloader isn't listed in the updater script. Try flashing CM11.
Click to expand...
Click to collapse
What a great tip, I was finally able to install a newer cyanogenmod on my d2att.
Downloaded cm-11-20140210-SNAPSHOT-M3-d2att.zip
Camera works most of the time but there is now a new bigger problem. Phone battery overheats daily and discharges instantly from full to low batt and shuts down. I'm going to try the latest nightly.
Apologies for bringing a dead thread back alive, hoping someone can help me. I want to install 10.1.3 but my bootloader is at I747MVLUEMK5. Can I edit the updater script to include this bootloader and then try the install? I don't know if that would mess anything up. If anyone could shed some light on it that'd be great.
The reason for doing this: Wireless Display is crashing on 10.2.1 with my phone but my buddy who has his S3 on 10.1.3 is able to share his screen with my smart TV without any issues. If there is a workaround that'd be great too.
Thanks !
imran025 said:
Apologies for bringing a dead thread back alive, hoping someone can help me. I want to install 10.1.3 but my bootloader is at I747MVLUEMK5. Can I edit the updater script to include this bootloader and then try the install? I don't know if that would mess anything up. If anyone could shed some light on it that'd be great.
The reason for doing this: Wireless Display is crashing on 10.2.1 with my phone but my buddy who has his S3 on 10.1.3 is able to share his screen with my smart TV without any issues. If there is a workaround that'd be great too.
Thanks !
Click to expand...
Click to collapse
If the bootloader is not supported, I do not advise editing the updater script to include your bootloader. Development of 10.1 probably stopped before the 4.3 bootloader was made available to the general public.
imran025 said:
Apologies for bringing a dead thread back alive, hoping someone can help me. I want to install 10.1.3 but my bootloader is at I747MVLUEMK5. Can I edit the updater script to include this bootloader and then try the install? I don't know if that would mess anything up. If anyone could shed some light on it that'd be great.
The reason for doing this: Wireless Display is crashing on 10.2.1 with my phone but my buddy who has his S3 on 10.1.3 is able to share his screen with my smart TV without any issues. If there is a workaround that'd be great too.
Thanks !
Click to expand...
Click to collapse
How do you do to share your screen in cm10.1.3 i have a lg smart tv and also share videos & pictures using wifi direct in stock rom.
Enviado desde mi SAMSUNG-SGH-I747 mediante Tapatalk