Related
How to get the T9 dialer like in the CM9 roms. were you type number and the contact appear
Without installing new ROM
like here http://forum.xda-developers.com/showthread.php?t=1399238
I pulled these from the CM9 ROM in the Development section. I've tried it on my phone (I'm running AOKP) and it works for me. Push these 3 apks to your /system/app directory. Remember to backup the old ones incase this doesn't work for you.
i seen a different thread on this.
but didnt work for everybody.
will it work on revolution rom?
silow said:
I pulled these from the CM9 ROM in the Development section. I've tried it on my phone (I'm running AOKP) and it works for me. Push these 3 apks to your /system/app directory. Remember to backup the old ones incase this doesn't work for you.
Click to expand...
Click to collapse
Which rom are you running? AOSP? But which one? 4.0.3 or 4.0.2? Seems like this works on 4.0.3 not 4.0.2 I have Bigies AOSP De-odexed rom and the other threads files didnt work for me
4.0.3
Sent from my Galaxy Nexus using XDA App
silow said:
4.0.3
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Thats what i was afraid of, I think this only works on 4.0.3, thanks tough
silow said:
I pulled these from the CM9 ROM in the Development section. I've tried it on my phone (I'm running AOKP) and it works for me. Push these 3 apks to your /system/app directory. Remember to backup the old ones incase this doesn't work for you.
Click to expand...
Click to collapse
Thanks silow! I'm running the ics-deck-evo [alpha1] ROM on my HTC Evo 4G, and used your APKs as a drop-in replacement, which work perfectly!
Tried to make a flashable zip to save everyone some time in the future. Anyone care to test? Nandroid first!
http://rootzwiki.com/topic/12696-ro...rnel-12302011/page__view__findpost__p__340835
i made my custom t9 implementation to stock dialer...
http://forum.xda-developers.com/showthread.php?t=1455376
In case anyone is having trouble finding toro as a device target when trying to build from the list of targets from the 'lunch' command... Toro didn't show up in the list but I was able to manually specify it rather than selecting a numeric option.
Devs probably know that works, but amateurs like myself might benefit from that tidbit. Jellybean seems to be building OK for me now.
EDIT: I was asked what I did, more specifically, so I'll put that here in op:
Rather than enter a numeric choice, I entered 'full_toro-userdebug'. Apparently this was a valid response and the build proceeded.
Mind explaining how you manually selected it?
keith.mcintyre26 said:
Mind explaining how you manually selected it?
Click to expand...
Click to collapse
Not at all. Rather than selecting say, 11 or another choice, I entered: full_toro-userdebug. Apparently this was a valid response and the build proceeded.
question... not much into actual developing here but i know my way around the inside of a rom or two... once you compile. will it be a fully capable rom? as in (what the OTA will be like without VZ apps)?
spunks3 said:
question... not much into actual developing here but i know my way around the inside of a rom or two... once you compile. will it be a fully capable rom? as in (what the OTA will be like without VZ apps)?
Click to expand...
Click to collapse
It's not as 'polished'. There are no gapps, the dictionary is not complete (need a version from a factory image/rom), there are extra keyboards (Japanese?), maybe a couple other oddities as compared to a stock ROM. It will certainly be more capable that porting a gsm rom to toro, that's for sure .
mmuzzy said:
Not at all. Rather than selecting say, 11 or another choice, I entered: full_toro-userdebug. Apparently this was a valid response and the build proceeded.
Click to expand...
Click to collapse
I did that right after I asked haha. Building now. Thank you.
Sent from my Galaxy Nexus using xda premium
keith.mcintyre26 said:
I did that right after I asked haha. Building now. Thank you.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
You're very welcome. Happy flashing.
I thought you meant the whole system. I was wondering where you got the jellybean source
Sent from my Galaxy Nexus using Tapatalk 2
phydo said:
I thought you meant the whole system. I was wondering where you got the jellybean source
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Google released it into the wild today:
https://groups.google.com/forum/?fromgroups#!topic/android-building/XBYeD-bhk1o
mmuzzy said:
Google released it into the wild today:
https://groups.google.com/forum/?fromgroups#!topic/android-building/XBYeD-bhk1o
Click to expand...
Click to collapse
Haha uhh.. I did realize that about two minutes ago. Thanks.
Sent from my Galaxy Nexus using Tapatalk 2
phydo said:
Haha uhh.. I did realize that about two minutes ago. Thanks.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I was actually trying to pull it before Google was finished so it hasn't been that long.
Hey can you help me out? Is your android version showing as 4.0.9.99.999.9999.99999? Wth?
anton2009 said:
Hey can you help me out? Is your android version showing as 4.0.9.99.999.9999.99999? Wth?
Click to expand...
Click to collapse
Lol!
Sent from my Galaxy Nexus using Tapatalk 2
phydo said:
Lol!
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Well... I figured out why it was showing like that; because I was syncing the master branch and not the 4.1.1 branch. But I'm still confused on this
Not to thread jack, but i have my rom building, but to actually personalize the rom, is there any app like eclipse or is it just editing files in the zip?
cdrshm said:
Not to thread jack, but i have my rom building, but to actually personalize the rom, is there any app like eclipse or is it just editing files in the zip?
Click to expand...
Click to collapse
You edit the source files. The goodies you want are in the res folder of most applications. /packages/apps in the source code. Here's my question, when I boot it gets to the Google screen and then a black screen. I suspect this here. When I start the build I see this:
Code:
find: 'src': No such file or directory.
PRODUCT_COPY_FILES device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml ignored.
... Many more of these Product copy ignored things...
And then it finishes compiling. What's up here, I'm pretty sure it's missing drivers and stuff!
CPCookieMan said:
You edit the source files. The goodies you want are in the res folder of most applications. /packages/apps in the source code. Here's my question, when I boot it gets to the Google screen and then a black screen. I suspect this here. When I start the build I see this:
Code:
find: 'src': No such file or directory.
PRODUCT_COPY_FILES device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml ignored.
... Many more of these Product copy ignored things...
And then it finishes compiling. What's up here, I'm pretty sure it's missing drivers and stuff!
Click to expand...
Click to collapse
Did you install the binaries for toro? There is also a script that will pull them from your phone (so a stock rom is best), which may be better because Google can't give you everything you need for a functional rom (GPS for example). I ended up copying those files from a stock image to my compiled rom.
i got my binaries from here https://developers.google.com/android/nexus/drivers#torojro03c
mwalt2 said:
Did you install the binaries for toro? There is also a script that will pull them from your phone (so a stock rom is best), which may be better because Google can't give you everything you need for a functional rom (GPS for example). I ended up copying those files from a stock image to my compiled rom.
Click to expand...
Click to collapse
cdrshm said:
i got my binaries from here https://developers.google.com/android/nexus/drivers#torojro03c
Click to expand...
Click to collapse
For future reference, what he's referring to is the extract-files.sh script included in the CM source. If you cannot find the proprietary binaries for a certain device you wanna build for, plug in the phone via usb, cd to the directory with the script and execute the command.
anton2009 said:
Well... I figured out why it was showing like that; because I was syncing the master branch and not the 4.1.1 branch. But I'm still confused on this
Click to expand...
Click to collapse
I also got version 4.0.9.99.999.9999.99999 when I synced to the master branch. Thanks for mentioning the workaround to sync with 4.1.1_r1 .
Did you figure out if it's a problem to sync 4.1.1 into a directory that's already synced with master (4.0.9.99...)?
--------------------------------
Update: I think I can answer this question based on JBQ's response:
https://groups.google.com/d/msg/android-building/rtH5ZbJC7qU/-N1lr9MqexYJ
"You can also switch in place: just run "repo init -b <new_manifest_branch>; repo sync" in your existing client."
Sounds like syncing to a new branch in the same working directory should work just fine.
Hello,
I am learning about rom development, and want some information about porting a rom from one version of the Nexus to another. There are a couple roms that are on the GSM Nexus that I would like to see on the Verizon Nexus. Where can I find documentation on what the differences are between the same rom running on both versions of the phone? Is this just the binaries found on the Google Developer page, or is there more that would be required for porting from maguro to toro?
There's more to it. There's some lib files that might be needed in order for some stuff to work properly. But its real easy tho. Make sure the ROM u want to port is the same android version. So for example u want to port a 4.2.1 ROM make sure your base ROM is also a 4.2.1 like cm 10.1. Then u just copy some files from one ROM to another. So u go into your ROM that u want to port and u open it with 7zip go to system folder and copy app fonts framework and media folder and copy them to your base ROM. Then u go into the lib folder and copy libandroid_runtime.so and paste that into system lib folder of your base. Then it should work. That would be the basic way of doing it. As far as building from source I can't help u there lol. Good luck.
Sent from my Galaxy Nexus using xda premium
Ok, how do I know which lib files I need? Is there somewhere I can go that says this file does this, this file does that? For example if the camera doesnt work, or if sound doesnt work, how do I know which files are needed for those?
Also, why copy the app fonts framework and the media folder?
Wingdom said:
Ok, how do I know which lib files I need? Is there somewhere I can go that says this file does this, this file does that? For example if the camera doesnt work, or if sound doesnt work, how do I know which files are needed for those?
Also, why copy the app fonts framework and the media folder?
Click to expand...
Click to collapse
Because the framework folder has all the mods from the ROM. As far as camera u don't have to worry about that since they are both the same phone. The only lib file u need to change is the one I mentioned. That's the one that usually will give u a problem booting up. But that's what I was told u need to change and it works.
Sent from my Galaxy Nexus using xda premium
Is there a place that documents what all of these files do? I am trying to go a couple levels deeper than just "Do it because it works". I am hoping to find a place that will explain why, so I can track down bugs when they pop up.
Wingdom said:
Is there a place that documents what all of these files do? I am trying to go a couple levels deeper than just "Do it because it works". I am hoping to find a place that will explain why, so I can track down bugs when they pop up.
Click to expand...
Click to collapse
I see. I'm not to that level yet. Try Google search or maybe even YouTube see if u find something. I do know u will need knowledge on how to use adb so u can do logcats when errors occur. Good luck man.
Sent from my Galaxy Nexus using xda premium
Alright, I got the rom to boot, but I am not getting any signal or wifi. What files do I need to get these working? I want specifics, not copy over all files in a single folder, because I dont want to lose any of the customization already in the rom.
I once ported a version of minco to Toro before there was an official version. I figured out which files to swap by comparing file by file two roms - one maguro one Toro. Any file that was divergent file size got swapped except systemui.apk and frameworkres.apk. I used two bugless beast roms as a base. It worked perfectly.
Wingdom said:
Hello,
I am learning about rom development, and want some information about porting a rom from one version of the Nexus to another. There are a couple roms that are on the GSM Nexus that I would like to see on the Verizon Nexus. Where can I find documentation on what the differences are between the same rom running on both versions of the phone? Is this just the binaries found on the Google Developer page, or is there more that would be required for porting from maguro to toro?
Click to expand...
Click to collapse
There are hardly any differences. I looked at it a lot when the jelly bean developer preview was released for gsm devices and I 'ported' it for toro. I had a list of the differences, but apparently lost it. I want to say that there are only 10-15 differences. The way I found out what the main differences were was by comparing the same build of CM for toro and maguro using Beyond Compare using a binary comparison. Some files may be different, but if you compare the bits directly...you can sometimes see it's only a build date/time and not a real difference.
edit 1 - To try to answer some of your questions, try libsec-ril_lte.so and libsecril-client.so (and the apn stuff listed below) for signal AND bcmdhd.cal and bcm4330.hcd for wifi. For camera, I think I remember fRom being needed. For GPS, you'll want sirfgps.conf, gps.omap4.so, gps.conf, and lib_gsd4t.so from toro.
edit 2 - Ahhh, I found a post where I listed the difference between maguro and toro that I found (it may not be all inclusive, but it should give you a good start!). These were from the CM roms, so toro factory images have a couple more things like MyVerizon.apk, VerizonSSO.apk, VZWBackupAssistant.apk, and libmotricity.so (needed for VerizonSSO.apk).
Code:
\system\app\BIP.apk
\system\app\RTN.apk
\system\app\VZWAPNLib.apk
\system\app\VZWAPNService.apk
\system\etc\gps.conf
\system\etc\permissions\android.hardware.telephony.cdma.xml
\system\etc\permissions\com.vzw.vzwapnlib.xml
\system\etc\permissions\com.vzw.hardware.lte.xml
\system\etc\permissions\com.vzw.hardware.ehrpd.xml
\system\etc\wifi\bcmdhd.cal
\system\etc\apns-conf.xml
\system\etc\NOTICE.html.gz
\system\lib\hw\gps.omap4.so
\system\lib\lib_gsd4t.so
\system\vendor\etc\sirfgps.conf
\system\vendor\firmware\bcm4330.hcd
\system\vendor\lib\libsec-ril_lte.so
Thank you! That is exactly what I was looking for. I do have one more question. How is a power menu (hold power button to get reboot, recovery, hotboot, etc..) added to a rom?
Wingdom said:
Thank you! That is exactly what I was looking for. I do have one more question. How is a power menu (hold power button to get reboot, recovery, hotboot, etc..) added to a rom?
Click to expand...
Click to collapse
You have to modify the android policy jar in framework from code. There is a modded jar in the apps and themes forum, or you could try and lift the file or of your favorite custom ROM, like cyanogenmod.
Wingdom said:
Thank you! That is exactly what I was looking for. I do have one more question. How is a power menu (hold power button to get reboot, recovery, hotboot, etc..) added to a rom?
Click to expand...
Click to collapse
Glad to see you have some initiative! If you want the .smali edits for the advanced power menu, I have attached a .zip containing the comparison of the mod for my 4.2.1 stock AOSP rom. You need to add the 3 GlobalActions$11xx.smali files (in the attached .zip) to \smali\com\android\internal\policy\impl when you decompile your android.policy.jar with apktool. The 2 .pdf's show the smali edits to the 2 files that need modified. There are just a few lines added/changed. The changes for GlobalActions.smali are on page 19 of the .pdf. If you need a working apktool for 4.2.1, you can get one the I compiled using paulobrein's patch HERE.
I'm glad to see people helping a fellow who whats to turn user-to-dev.
Sent from my Galaxy Nexus using Tapatalk 2
Wingdom said:
Alright, I got the rom to boot, but I am not getting any signal or wifi. What files do I need to get these working? I want specifics, not copy over all files in a single folder, because I dont want to lose any of the customization already in the rom.
Click to expand...
Click to collapse
Try flashing the radios. Here is a link: http://forum.xda-developers.com/showthread.php?t=1890585
Wingdom said:
Alright, I got the rom to boot, but I am not getting any signal or wifi. What files do I need to get these working? I want specifics, not copy over all files in a single folder, because I dont want to lose any of the customization already in the rom.
Click to expand...
Click to collapse
I know this is old but... How did it go?
I was trying to port cm-Resurrection_Remix_LP_v5.3.9-20150319-maguro to toro by comparing Resurrection_Remix_KK_v5.1.5-20140609-toro with that maguro but CM12 structure and format is completely different than KK...
Ok, I've commented about this several times in the CM10 Discussion thread and nobody seems to give a rat's bum...
When I take a picture, the EXIF info is saved as December 2008.
There are not much differences from ics 4.0.4 to jellybean 4.1.2 so i prefer to use stock rom which has less bugs
I'm using hono stock cwm flashbale v20c
I need help to port or add qmemo app from v20f bell rom to v20c at&t
And i wana add it to quick setting menu to be able make screenshot.
I did ask it in a new topic before with no result and success !
You are a developer and i used your rom liquid nitro ,Can you add it to quick setting menu ?
http://forum.xda-developers.com/showthread.php?t=2086059
Sent from my LG-Nitro HD using Tapatalk 2
mattman86 said:
Ok, I've commented about this several times in the CM10 Discussion thread and nobody seems to give a rat's bum...
When I take a picture, the EXIF info is saved as December 2008.
Click to expand...
Click to collapse
This along with down right pathetic battery life I refuse to run cm10.
nss007 said:
There are not much differences from ics 4.0.4 to jellybean 4.1.2 so i prefer to use stock rom which has less bugs
I'm using hono stock cwm flashbale v20c
I need help to port or add qmemo app from v20f bell rom to v20c at&t
And i wana add it to quick setting menu to be able make screenshot.
I did ask it in a new topic before with no result and success !
You are a developer and i used your rom liquid nitro ,Can you add it to quick setting menu ?
http://forum.xda-developers.com/showthread.php?t=2086059
Sent from my LG-Nitro HD using Tapatalk 2
Click to expand...
Click to collapse
Why not just run v20f? Once you put in the APN info it runs just fine with AT&T and with the additional tweeks it offers better battery life and a newer improved Adreno driver plus it offers the quickmemo you love its a win win for you.
Sent from my LG-P930 using xda app-developers app
nss007 said:
There are not much differences from ics 4.0.4 to jellybean 4.1.2 so i prefer to use stock rom which has less bugs
I'm using hono stock cwm flashbale v20c
I need help to port or add qmemo app from v20f bell rom to v20c at&t
And i wana add it to quick setting menu to be able make screenshot.
I did ask it in a new topic before with no result and success !
You are a developer and i used your rom liquid nitro ,Can you add it to quick setting menu ?
http://forum.xda-developers.com/showthread.php?t=2086059
Sent from my LG-Nitro HD using Tapatalk 2
Click to expand...
Click to collapse
I can give it a try... But this really isn't a thread about that and I'd like to keep it on topic.
Swetnes said:
This along with down right pathetic battery life I refuse to run cm10.
Click to expand...
Click to collapse
I don't really care about battery life since my phone is always plugged in anyway. But I'd really like to have a working camera.
Vibration on key press are too strong??
Does anyone feels that the vibration when hitting the "menu, search, back" buttons in CM10 is to strong??
Is there any way to reduce the vibration feedback?
tuan0saker said:
Does anyone feels that the vibration when hitting the "menu, search, back" buttons in CM10 is to strong??
Is there any way to reduce the vibration feedback?
Click to expand...
Click to collapse
This question is almost exactly like, if not completely different than the thread topic... but to answer your questions: I wouldn't say it's too strong, but it seems that it vibrates twice for each press. no.
tuan0saker said:
Does anyone feels that the vibration when hitting the "menu, search, back" buttons in CM10 is to strong??
Is there any way to reduce the vibration feedback?
Click to expand...
Click to collapse
Please don't hijack my thread! The vibration is fine.
Sent from my LG-P930 using xda premium
mattman86 said:
Please don't hijack my thread! The vibration is fine.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
i think you main issue is that you re using Jellybam, that rom has so much issues with the camera (also bad battery life) even after flashing the 4.2 one, got off that rom and not having issues with it now ..
just1nsama said:
i think you main issue is that you re using Jellybam, that rom has so much issues with the camera (also bad battery life) even after flashing the 4.2 one, got off that rom and not having issues with it now ..
Click to expand...
Click to collapse
That's not really the issue. I've tested this on multiple ROMS. The problem exists on:
JellyBam
CM10
ParanoidAndroid
Quattrimus
Hyper Sonic
Does anybody have any ideas here?
mattman86 said:
Does anybody have any ideas here?
Click to expand...
Click to collapse
Have you tried reflashing the camera and the lib files as well ? i know the lib files have something to do with editing photos and stuffs, cuz i had to flash them after installating the 4.2 camera with new ones or editing would not work, maybe try to reflash the right lib files that comes with the camera version you are using.
just1nsama said:
Have you tried reflashing the camera and the lib files as well ? i know the lib files have something to do with editing photos and stuffs, cuz i had to flash them after installating the 4.2 camera with new ones or editing would not work, maybe try to reflash the right lib files that comes with the camera version you are using.
Click to expand...
Click to collapse
Where would I get the lib files?
Sent from my LG-P930 using xda premium
mattman86 said:
Where would I get the lib files?
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
You can extract them from the .zip of the rom you are using or a basic CM10 if you are using camera 4.1, if using 4.2 you are gonna have to find the complete package that comes with the lib, look for the thread called "android 4.1 to 4.2" and extract them from its package or extract them from a CM10.1 package (not sure that works tho, used the android 4.1 to 4.2 package in my case)
As for the files, you need to extract:
In the zip, they are in system/lib and are named libjni_filtershow_filters.so libjni_latinimegoogle.so libjni_mosaic.so and liblightcycle.so
Once you extracted the files, (backup or rename the old files 1st) copy them to your phone's system/lib using a root explorer (es or root explorer w.e you like to use) and make sure to change the files persmissions to r-r-rw and reboot your phone.
If that doesnt work, l really dont know ...
just1nsama said:
You can extract them from the .zip of the rom you are using or a basic CM10 if you are using camera 4.1, if using 4.2 you are gonna have to find the complete package that comes with the lib, look for the thread called "android 4.1 to 4.2" and extract them from its package or extract them from a CM10.1 package (not sure that works tho, used the android 4.1 to 4.2 package in my case)
As for the files, you need to extract:
In the zip, they are in system/lib and are named libjni_filtershow_filters.so libjni_latinimegoogle.so libjni_mosaic.so and liblightcycle.so
Once you extracted the files, (backup or rename the old files 1st) copy them to your phone's system/lib using a root explorer (es or root explorer w.e you like to use) and make sure to change the files persmissions to r-r-rw and reboot your phone.
If that doesnt work, l really dont know ...
Click to expand...
Click to collapse
It wouldn't work to use those lib files from CM10 because this issue is with all CM10 based Roms
mattman86 said:
It wouldn't work to use those lib files from CM10 because this issue is with all CM10 based Roms
Click to expand...
Click to collapse
I know it ain't saying much, but I'll play around with it...
mattman86 said:
It wouldn't work to use those lib files from CM10 because this issue is with all CM10 based Roms
Click to expand...
Click to collapse
How about flashing the 4.2 camera with the CM10.1 lib files ... you can get them from the "android 4.2 to 4.1" thread i mentioned above, why not give it try instead of assuming it wont work =)
just1nsama said:
How about flashing the 4.2 camera with the CM10.1 lib files ... you can get them from the "android 4.2 to 4.1" thread i mentioned above, why not give it try instead of assuming it wont work =)
Click to expand...
Click to collapse
Didn't work.
mattman86 said:
Didn't work.
Click to expand...
Click to collapse
It's not a problem that can be easily fixed. It has to do with the proprietary drivers.
Sent from my LG-P930 using xda premium
Is there a possible fix to let my sprint galaxy nexus running cyanogenmod 10.2 (installed clean) lock on GPS? I've let the searching for GPS signal blink for 30 minutes (while stationary) to no avail. I've flashed GPS fixes on other phones and models but i haven't come across one for the toroplus cm 10.2.
Any and all help is appreciated.
I'm using the Verizon 4.2.2 GPS+WiFi drivers. Works a treat.
Sent from my Galaxy Nexus using Tapatalk
I usually get a better and quicker lock to GPS on a fresh reboot. Not sure why it slows down after hours of not being rebooted.
Also I use GPS Status & Toolbox so I can see what's actually going on with the gps. There are also some settings that you can adjust for how often to download GPS assistance data, etc.
Sometimes still though it takes me 4 minutes to get a GPS lock. I don't recall if I've had this issue on cm11, but sometimes it never will lock to GPS until I reboot. I think that was an issue that I had with cm10.2.
PTown599 said:
I'm using the Verizon 4.2.2 GPS+WiFi drivers. Works a treat.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Will this work with toroplus (sprint) on 4.3?
I'm on CM 10.2 stable toroplus and it solved all my GPS issues.
Sent from my Galaxy Nexus using Tapatalk
PTown599 said:
I'm on CM 10.2 stable toroplus and it solved all my GPS issues.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Great thanks! Just so I dont flash the wrong zip or edit the wrong settings which drivers exactly are you reffering too? A quick search yielded a lot of results but nothing specific.\
1. http://forum.xda-developers.com/showthread.php?t=1747943
2. http://forum.xda-developers.com/showthread.php?t=2144849
3. http://forum.xda-developers.com/showthread.php?t=1563226
4. Other
Any help is appreciated
It's a flashable zip. I'll post it for you today when I'm at a PC.
Sent from my Galaxy Nexus using Tapatalk
Attached
Reporting back that this solved my issue. Thanks.
Glad to hear it worked for you too. Hopefully this thread will help others also.
Sent from my Galaxy Nexus using Tapatalk
I have the GSM i9250 (maguro) version. Is it ok to flash that .zip?
Seems that lib_gsd4t.so, gps.omap4.so are the key files? -not sure about bcm4330.hcd - seems like wifi only.
Updated thread at CM forum: http://forum.cyanogenmod.com/topic/77119-no-gps-fix/
hmm. Seems like the gps firmware and files are different on maguro compared to toroplus so this fix isn't going to work for me.
I guess what I need to do is go into the stock ROM, somehow extract \system\lib\hw\gps.omap4.so ,
\system\lib\lib_gsd4t.so . \system\vendor\etc\sirfgps.conf & maybe \system\etc\gps.conf and copy them over into my ROM after a nandroid backup.
I will research now how to extract files from a stock ROM.
update: extracted some files... but not all... will try anyway... expecting to brick it to be honest... (attached)
ah... there's
/system/lib/hw/gps.goldfish.so
in the CM10.2 maguro image... what's that? It bears no relation to the stock ROM...
files from yakju-jwr66y-factory-09207065.tgz https://mega.co.nz/#!SQFT2A5B!RQ1aoFmlTugdq6iwukVigBoquyJa7pF7Xg2Zk5hJmdE
from
https://dl.google.com/dl/android/aosp/yakju-jwr66y-factory-09207065.tgz
Now examining cm11 alpha http://forum.xda-developers.com/showthread.php?t=2531313 ...looks the same... getting annoying on this....
update:
It was probably privacy guard! disabled... will test later...
https://jira.cyanogenmod.org/browse/CYAN-2918?jql=project = CYAN AND text ~ "gps"