Develop Bugs

Compare REG/RGU files...

I have two *.reg files, the first after Hard Reset and the other after i have customised some stuff. Is there a program that shows the differences between these files (which keys where added,removed or altered) so as to save the differences and add them to my new build without having to do the customization over and over again after every flash? I found a program called CERegEditor but it doesn't allways work. For example if i use the same file for original and altered it shows differences for some reason, so i don't trust it.

Give Windiff a try. That should do what you want to do. http://www.grigsoft.com/download-windiff.htm

The two files don't have the same registry keys so comparing them line by line is pointless. I need a program that understands that these files are registry entries and finds the differences between the entries.

I've done what you're trying to do with WinMerge. It should highlight all changes and completely new reg sections that were added.
Let me know how it goes

I've also used WinMerge for similar stuff. It's a cool app (and a free and OSS one too!).
If the structure of the files is the same except for the keys you want to know it'll be a very easy task.

CycloneApps[By Request][ContactRetriever 3.0][CMessageSuite V1.0][CBRunner V1.0]

Hello Everyone,
I am a avid, aspiring developer, and as such I felt it would be mutually beneficial to start this thread. The Point of this this is for you [the users] to post up ideas for programs, and some sketch-ups of designs, and in return, I will try to make, and maintain, these applications.
In doing this, I will get the experience I need, and you [the users] will get the results that you [hopefully] want.
Below is [or will be soon enough] a list of programs that are developed or in the process of consideration.
Project List:
AutoSend - Scheduled SMS Sender [V3.5][NO LONGER BEING UPDATED]
CMail - A Replacement tmail for Devs and Advanced Users[V1.0]
Export-Studio - A FREE alternative app to export Contacts and SMS[V4.0 + Command Line Version]
Appointmentor - A command-line based app for creating appointments quickly and easily [V1.5]
ContactRetriever - A command-line based app for getting info on a specific contact! [V3.5]
CDL - A Command-Line based File downloader (designed with MortScripter's in mind) [Release Delayed]
CSort - A Command-Line based List Sorter (designed with MortScripters in mind) [V2.0]
ImgResize - A Command-Line based Image Resizer (Resize + Crop) [V2.0]
All2Reg - Based off of Msg2Reg, this will export MANY things to registry [Coming Soon]
TornadoClean - A utility for deleting old files/SMS/MMS/EMAILS with certain 'traits' specified by the user [Conceptual - PsuedoCode Stage]
CBRunner - [Idea courtesy of HowdyKeith] Runs EXE's (and possibly other file types like MP3, etc.) In the background so MortScripters can do their stuff! [V1.0]
CMessageSuite - A Re-Make of AutoSend with more features! [V1.0]
*As you can see, the list is sort of pathetic now, but with your help, I can bulk it up*

UPDATE:
A command-line version of Export Studio is now posted for all you Scripters!

Appointmentor[V1.5]
This program allows scripters and devs to quickly and easily make appointments. This program features the ability to set every parameter that a user could set thru the calendar itself (I believe...)
This Program Includes:
A documentation explaining all parameters
A small cmd-line app for creating appointments.
To Install:
Just download and extract the ZIP file to anywhere on your phone, and you are done!
To use:
Follow the parameters in the documentation, but as for running it, run it like any other command-line based program.
Tips:
Not all parameters must be set, as I have preset defaults (shown in documentation).
EDIT: DOWNLOADS REUPLOADED
V1.5 Update:
In this update, you can DELETE scheduled appointments. This feature has not been thoroughly tested, so errors may occur. Will test in near future. (If users could post back successes/failures it would help).
Please test it out!
*While I coded this on my own, credit must be given to google and this forum for its constant help in everything I do. Please don't forget that while these apps are free, donations are appreciated!*

Update:
I fixed up a major issue in Appointmentor and re-uploaded it. Now it should work. All documentation is provided in the ZIP file. Please test and post results and ideas!!!!

Image Resizer [V2.0](Command-Line Utility)
This application is a command-line based app for resizing images.
All instructions are provided in the Documentation.txt
Enjoy!
V1.5 Update:
In this version of the program, Cropping is now available. Look at the docs to find out how to use it. I also fixed an issue with Naming, so now the outputted file has the ACTUAL size of the image (not what is inputted in some cases). Also, you can use PERCENTAGE to resize/crop. Lastly, you can now simply convert your file from one extension to another.
V2.0 Update:
In this version, BatchCropping and BatchResizing is now available. Look at the docs to find out how to use it. This comes in handy when dealing with many pics in a folder. Please report back any bugs that are found
DISCLAIMER::::::
I did not code this program fully by myself. For the original Image Resizing project visit:
http://blogs.msdn.com/acoat/archive/2007/05/09/resize-images-a-thumbnail-maker.aspx
All Credit for the actual Image Resizing functions of this app go to the original author:
Username on msdn blogs is : acoat
Name (?) : Andrew Coates

ContactRetriever V3.5
This application allows a scripter or dev to export a specific contact's data for easy use!
This program includes:
A simple, easy to follow documentation and functionality
A light-weight solution for getting contact info.
A SUPER EASY GUI (contacts menu) when not wanting to start it in CommandLine mode.
The ability to export specific contacts (or many) as VCF files
To Install/Use
Just unzip the ZIP file and read the documentation!
(To use the GUI, just run the app WITHOUT parameters, to use the CMD run it WITH paramteres)
Bugs:
None so far!
V3.5 Update:
In this version, you can find contacts by partial (or full) phone numbers! Read the docs for more info.
Please remember that while I did the coding on my own, help came from XDA and Google and the millions of resources on the net. Please remember that while this application is free, Donations are greatly appreciated!
Enjoy!

UPDATE:::
Export-Studio 2.5 Is now out.
2.5 Has the ability to set the NUMBER of Contacts/SMS to be exported (with a safeguard that if the number is too high or is 0, it will set it to the maximum).
Expect an upgrade to Export-Studio 3.0 Soon (ability to export to VCF, and maybe MMS implementations).
Expect a new CMail to come out (ability to send E-Mail's via commandline and maybe MMS implementations).

Contact related app...
I've been searching for an app that allows to browse the contact list (with a scrollable list of names for a GUI... similar to Outlook or any other contact manager) and retrieves a selected contact full name as a reg key (my point would be using it in conjunction with MortScript and go2contact to add a dynamic contact launcher feature to my HS++ skin... guess it would be usefull for other skinning engines too).
Would you be willing to do such an app?

frmariam said:
I've been searching for an app that allows to browse the contact list (with a scrollable list of names for a GUI... similar to Outlook or any other contact manager) and retrieves a selected contact full name as a reg key (my point would be using it in conjunction with MortScript and go2contact to add a dynamic contact launcher feature to my HS++ skin... guess it would be usefull for other skinning engines too).
Would you be willing to do such an app?
Click to expand...
Click to collapse
Sure would be! I will just implement a GUI into ContactRetriever! Expect a release in 10 minutes TOPS.
UPDATE::
Export-Studio 3.0 Now released - Can export Contacts as vCard (VCF) format!
UPDATE::
ContactRetriever 1.5 NOW released - Has a really simple GUI (same functions)!!
UPDATE::
ContactRetriever 2.0 NOW released - Ability to export as VCF, control # of contacts, and WILDCARD'ing

Thank you so much! Just tried it and this was what I was looking for.
There seems to be an issue though... I can only get stuff from the first contact in the list... Also the name will be in all caps and have an underscore before it... I can't get any other contatcs info in the reg...

how about Cdown.exe -url "http:.../file.zip" -outp ".../file-Downd.zip"
as smartphones cant do that w/mort atm...

howdykeith said:
how about Cdown.exe -url "http:.../file.zip" -outp ".../file-Downd.zip"
as smartphones cant do that w/mort atm...
Click to expand...
Click to collapse
Added to project list....WOrking on it

Thank you so much for fixing ContactRetriever
While the paint is still fresh... Any chance on creating a value for the selected contact named "LastSelectedContact" (or something else) where the contact name is the data (without the preceding underscore and case sensitive like Outlook). Would really make it a lot easier to MortScript (I really have no idea how to get just the desired part of the key and remove the underscore).
Hope I'm not abusing of your good will...

Hey, so I can't really make a key that is for "lastcontact" because the command-line users may export a whole bunch of them (as you can see, I implemented the ability to export based on Wildcards)....
As for removing the underscore and such, I put that there as a standard for users so that they know what WAS created by my program, or what was created by something else that may have used the same area (rare, but possible).
Anyways, if you want to format it, do a substring on the Key name using the indexOf the _ as the ending for the first and that + 1 for the start of the second, then bring it all to lowercase then make the first uppercase (through substringing?) I don't know the mort-commands, but I am sure you can figure it out by asking HowdyKeith or posting on the MortScript thread or reading the Manual on Mort's website.
Good Luck

Thanks for the info. I've been reading the txt manual of Mortscript and it's kind of incomplete compared to the pdf... I'll read it tomorrow (must sleep) but until now I didn't find a function that returns the reg key (because it'll be random). I'm sure the substring bit will help.
Just found my contact list got sort of messed up by some app I used (guess it's too late to find out which one...) All the names (first and last) are now stored in the first name box... I didn't notice it before so I didn't get why was there a _ before the name even when I had a last name too.

Ok.
How about CSort.exe -inp "/path/Unsorted.txt" -outp "/path/sorted.txt"
maybe the option to dump the output into a regkey:
Sorted1=Alimoney
Sorted2=Bingo
...
If we r dumping to a reg folder, why not import from a registry folder too?

So i know u got the picture taking exe.
what about calling the Camera get picture class? Like your contact retriever calls the GUI.
I have to think about it to see if that makes sense.

howdykeith said:
So i know u got the picture taking exe.
what about calling the Camera get picture class? Like your contact retriever calls the GUI.
I have to think about it to see if that makes sense.
Click to expand...
Click to collapse
I am using Managed C# code, and the most 'power' that I get in terms of taking photos is just to start up the 'dialog' with certain paramters....so in MortScript, a script can just call it, then send the "ENTER" button to start and "ENTER" to stop (if it is a video) or save (if it is a photo)....
*FYI: The Camera App I am developing is currently in Private Beta, release soon enough*

So as far as contacts posted to the reg from contact retriever.
It probly should always delete the prior searches unless you give it a command -keep

For the advanced hacker: SQL database access and posting.
Do u have a Microsoft Bluetooth stack? There is no toggler for Widcomm Bluetooth. PhoneAlarm controls the bt just fine, so it's not impossible.
Can you turn on and off the flash? Other apps do it, so that's a low priority. But if you could and u added that function to an all in one tool, that would be cool.
Make a contact from a command line.
Can u change the power profiles? Normal/Headset/Auto...
Can u get the accelerometer info? i dont have one. Detect stylus removed from a command line?
I really hope u can get the sorter to the registry, so i am holding my breath til then.
Thanks Dude.

[APP] Resident Mort - Scary Good, not Scary Evil

*Anyone get the reference? Haha*
Resident Mort
The Scripter's Companion​
Current News / Status:
Resident Mort is currently Under Development
Resident Mort is planned to be a background EXE that will extend the functionality of MortScript available to developers through the usage of the "PostMessage" function.
Resident Mort is planned to extend functionality by adding extra, possibly more complex, functions or even adding in the ability for more complex GUIs.
Features (Green = Implemented, Blue = In Testing, Orange = Planned, Red = Failed):
GetProcessList - Gets a list of Running Programs
GetRecentApps - Gets a list of Recent Apps (10)
CreateScript - Creates a MortScript with the provided info
MakeFile - Makes a file of any kind with the provided info
MakeFolder - Makes a folder at the specified location
RegToEvent - Registers a File to an event​
UnRegFromEvent - Unregisters a File from an event
IsIdEventRegistered - Checks to see if a File is registered to an event.
DispImg - Displays an Image to the screen [and gets where the user Presses]
MakeForm - The Initial call for setting up an 'advanced GUI' form
FormAddObject -A Call that will add one of the predefined objects to the form being created
DeployForm - The Final call for setting up an 'advanced GUI' form, displays it to the user
This application is being made for MortScripters, to possibly make some projects easier. Since I don't use MortScript so much any more, I do rely on you the developers who use MortScript, to tell me what you want in the program.
Since I have a good deal of Functions there, I will commence work on a primary release

Saved For Future Use - Features and Screenshots

like the idea! advanced guis would be very useful

so this is a compiler? I am not sure what this is about
-sorry

No, this is a Resident App, an EXE that is always running in the background. It will have certain functions in it which can be accessed by MortScripters.
All the functions can be called with PostMessage ( I will provide documentation on how to do so, when I make a first release ). Then the results will either be written in the REGISTRY, written to a FILE, or copied to the CLIPBOARD (depending on how the scripter wants to handle the task).
Does this clarify it a bit?

Thanks for sharing!

A small update:
I am using this 'decent' planning utility, to help me keep track of my growing projects. According to this utility, the program is close to 30% complete. Then again, this is just a 'decent' utility haha. I would say, in my estimation (since some Code is "Copy + Paste"), I am close to 60% to 75% done.
A small change in my plans:
While I originally had the intentions of making this program as simple as a PostMessage in MortScript, I found out the following two Limitations:
1) MortScript's PostMessage/SendMessage only support(s) sending Numbers in the wParam and lParam parameters...very disheartening.
2) Due to #1, I made an assistant EXE, which would be run instead of calling PostMessage [this way I could do it Natively in my own control], but it is MUCH harder to transfer data between two applications that I would have thought! Due to Virtual Stacks and Memory Allocation 'rules', I couldn't EASILY do this.
So Here is my change:
In order to use Resident Mort, scripters will have to do about 3 or 4 commands to run. The only real commands that need to be used are PostMessage and RegWriteString (Did I get those right?).
In any case, my Resident Mort will read the Registry for corresponding wParam and lParam values and use those [in the future I will attempt Clipboard integration, to avoid Registry Interfacing].
When I release this program to the public, I will try to include a MortScript file that shows how to use all the functions. I don't remember much of MortScript [unfortunately], but I was thinking it could be helpful to make a "Library" of MortScript functions so a script will only have to call that function. But that is if some kind dev. would like to help out later on
Anyways, Thats that for this update. Expect a result in the coming week.

That sounds interesting for adv. gui functions.

Cyclonezephyrxz7 said:
1) MortScript's PostMessage/SendMessage only support(s) sending Numbers in the wParam and lParam parameters...very disheartening.
Click to expand...
Click to collapse
That's not MortScript's fault, it is design of whole Windows CE kernel, more here
I'd go with background EXE, that would listen to messages WM_USER+somenumber, maybe even region (for different actions, so you'd have both lParam and wParam free for another parameters). If you need help with this part, drop me PM on MSN, I had to study this a bit in the PinchToZoom project myself.

@OndraSter : Yeah, I know that Windows CE has limitations, however it is not impossible. Such an ability could be implemented in a code-update to MortScript. I did my reseach (if you look at #2, I mention that I found it much harder to transfer data between exe's that I had hoped) and found that you can transfer data via SendMessage (the Synchronous method) using a TRANSFERDATASTRUCT and WM_COPYDATA. If MortScripts interpreter could identify a SendMessage with a String value in either wParam or lParam, then it would create such a structure and transfer it, the receiving app would HAVE to take care of deleting the data though, or you have mis-used RAM.
As for how it is going to work now, I did not consider using WM_USER + a value, mainly because my program won't be using other Messages, and will only act if the correct wParam/lParam are provided (preventing accidental execution if the System decides to post a message with the same ID). I have it mostly covered, and I am closing in on finishing (currently with Reg data retrieval only, no Clipboard yet). I have completed 3 of the 7 Proposed Functions (MakeFile, MakeFolder, CreateScript) and I would have finished RegToEvents, but I got sorta lazy hehe. DispImg shouldn't take me more than a few minutes when I get to it, and once I get the API calls for Processes and figure out how to read the MRU reg-entry, I will have the last 3 complete!
As for Clipboard data retrieval, unless I am using the entirely wrong API calls, MortScript has an interesting way of using the Clipboard...I tried copying simple strings like "hello world" to the clipboard using MortScript, then trying to retrieve them in my Resident Mort, but the clipboard always comes up empty... Any ideas anyone?
Thats that for now I am about ready to release....any other functions you want implemented?

As for how it is going to work now, I did not consider using WM_USER + a value, mainly because my program won't be using other Messages, and will only act if the correct wParam/lParam are provided (preventing accidental execution if the System decides to post a message with the same ID).
Click to expand...
Click to collapse
http://msdn.microsoft.com/en-us/library/ms644947(v=VS.85).aspx

Good idea, the only downside being that it will generate the Message Numbers each time it is run... It is not assured that the Post / Send Message MsgIDs will remain constant.
Thanks for the link however

Cyclone,
Sorry about taking so long to post here...
How about, when the BT is on, this reports what is "out there" based on what the BT stack is telling you.
That is, it should read the surrounding area, then report that is saw my BT dongle. In the car, it should report that it saw my BT GPS unit.
Then, I can use that information to change my profile. That is, when it sees the BT dongle, regular phone calls. When it sees the BT GPS unit, run speaker mode, or connect to the GPS unit for phone calls.
Thanks!
--Ironhead
P.S. it would need to support the Touch Pro 2, Rhodium (my understanding is that it is Widcomm BT stack)

I"ll see what I can manage. I am really 'grid-locked' in my work on a couple of projects already So a release of this may have to wait a while....Sorry

I wish I had caught you a little sooner...
AutohotkeyCE may be a better base to work from than Mortscript...
http://www.autohotkey.net/~Micha/AutohotkeyCE/html/index.htm
In fact... AHKCE should be able to cater to all of your needs without the separate resident app

Yeah, I have seen that before. This project is really just a little challenge for myself to expand upon MortScript [because I know it is widely used].
Thank you for the link/suggestion however

I've been playing with Mortscripts for a while, I'm really thinking I can do everything I want, right from there...
EXCEPT:
Actually getting the information from the BT stack. I just need to see if there are any registered BT devices around my phone (so I can tell if I am in my car, at home, at work, etc.).
--Ironhead

Bumpity bump!

Hehe...Yeah, sorry for the lack of work on this. Check out FFP_LockScreen. I am working on a new release. I have very little time now, and I can't manage more than just one or two projects at a time. Once I release FFP_LS 3.0, I can devote some time MAYBE to this project. It all depends on how quickly the XDA-Marketplace idea takes off.
Sorry =\

I you can add a tool to make an GUI... it s must be soo cool...

[XAP + Source] Advanced Explorer [Version 1.4]

Hello XDA Community,
@DEVELOPERS: I need some developers with other devices to make things (at least parts of advanced explorer) work on other devices (i have a htd hd7). !Programming & Testing!
Please PM me
To bring all together what xda achieved for WP7, i wrote a helper app for the following tasks,
- File management
- Registry management
- Copy files from desktop to phone
- Copy files from phone to desktop
- Set max unsigned apps
- Provision any given XML
If you post in this thread how any of those features could be implemented on other devices, i will maybe implement them. You can always send me a modified version and i will maybe update this post with the new version!
Usage/(Release-)Notes on the website!
If you encounter any errors, or wanna give some feedback => just leave a post here or use the idea page or write me an email (go to contact on the homepage)!
I included the source code, so that anybody can modify it at will but do not use anything here for commercial purposes (contact me first).
Homepage for this project:
http://sites.google.com/site/yaafdevelopers/projects/advanced-explorer-for-wp7
You can give feedback / bugreports:
http://advancedexplorerwp7.codeplex.com/
(Go to Discussion or Issue Tracker)
You will find the latest version and the Release-Notes there. I will continue to watch this thread!
Because some people asked how to support/donate me:
I appreciate every donation! Thank you!
reddragon

He that is great stff... i am glad you added the source i was thinking about how this could work having had a little peek at the code in the samples that Ms provided.
wings over a thanks too

Question...If you send a file, where does the device dump it into the computer? I was getting an error sending the file to my computer at first, but then I configured correctly and it sends fine, but I don't know where it is...
Edit: Nevermind, I got it. Upload/Download Root folders. Good work on this app man. Pretty nifty. Uploaded a .doc from my laptop to the phone, copy/pasted it into My Docs and it appeared and opened on MS Office Word perfectly.

nice ! but ...
Nice app !
But can't send from \windows directory ?..

Re: can't send from \windows
Hey,
like i said in my first post i brought together what was achieved...
Im using the HTC app COM dll files for file system access. Actually you can send files from \windows but not all. (in usage or no access)...
If somebody knows a better way, or something for other devices => just implement and send it, or post here!
The problem: Now it works on my device, so I can do what i wanted to do (coping .pdf and other stuff on the wp7) I have not the time to search & wait for other devices.
I tried to code it very generic and emulated the System.IO namespace, so everybody can add his results or replace it with better results.
Just contact me and I will check the code and update the first post.
reddragon93

eternalemb said:
Question...If you send a file, where does the device dump it into the computer? I was getting an error sending the file to my computer at first, but then I configured correctly and it sends fine, but I don't know where it is...
Edit: Nevermind, I got it. Upload/Download Root folders. Good work on this app man. Pretty nifty. Uploaded a .doc from my laptop to the phone, copy/pasted it into My Docs and it appeared and opened on MS Office Word perfectly.
Click to expand...
Click to collapse
actually you can double tab any file and it should open from any folder.
To get PDF working I copy the file to the PDF reader (most likely the app will crash if Adobe reader is not installed), but you will not see anything as PDF reader just pops up with the file
Just like always contact me if there are file types missing!

cool app, ty
how long did it take?

hi reddragon93, thank you for your work, i've an lg optimus 7, is there an eta for explorer for other device?
i need it!!!
thank you so much!

gianlucarugby said:
hi reddragon93, thank you for your work, i've an lg optimus 7, is there an eta for explorer for other device?
i need it!!!
thank you so much!
Click to expand...
Click to collapse
I really can understand you because I needed this for myself (that's why I coded it in the first place)
But the answer is NO, because we have to wait until somebody finds a way to get access on other devices and shares the info (i will observe this thread for new infos).
And by the way you should not ask for ETA in developer forum (forum rules), but it's OK for me. Hope you will be the only one after my answer
I answered this question in my first post:
"If you post in this thread how any of those features could be implemented on other devices, i will maybe implement them"
Hope I answered your question.
reddragon

thanks, you were very kind,
apologize me for the ETA, i did not know, i'm just a student not a developer!
good work!

EDIT: I can't figure out how to mark a post as useful yet, so let me just say THANK YOU!!!
Awesome app. However, there are a few things that would be nice in terms of file types:
Any chance of getting support for loading .mobi files (Kindle ebooks)? I'd love to be able to sideload books that aren't in the Amazon store.
Currently, .log files won't open. Copy/renaming them to .txt should work, or a simple text reader/editor could be built-in.
Possible bug: the "Max unsigned apps" field in Settings is showing "Not set - (can't read from registry)" Setting it from within the app seems to work, though (and be remembered).
Feature request: ability to search the registry
Small change request: pressing Back on an Exception could do the same as OK (rather than exiting).
Overally, much thanks for an awesome tool!

Thanks for feedback
GoodDayToDie said:
EDIT: I can't figure out how to mark a post as useful yet, so let me just say THANK YOU!!!
Awesome app. However, there are a few things that would be nice in terms of file types:
Any chance of getting support for loading .mobi files (Kindle ebooks)? I'd love to be able to sideload books that aren't in the Amazon store.
Currently, .log files won't open. Copy/renaming them to .txt should work, or a simple text reader/editor could be built-in.
Possible bug: the "Max unsigned apps" field in Settings is showing "Not set - (can't read from registry)" Setting it from within the app seems to work, though (and be remembered).
Feature request: ability to search the registry
Small change request: pressing Back on an Exception could do the same as OK (rather than exiting).
Overally, much thanks for an awesome tool!
Click to expand...
Click to collapse
Thanks for your feedback!
(1) I really needed the app for myself (real pdf support) so... The Thanks Button is only visible with 5+ Posts
(2) i will pm you maybe if i find some spare time. This is most likely pretty simple to implement. Can you edit your (or create a new) post and describe what happens if you double tab a kindle book with the current version?
(3) yeah i saw this before but didn't thought it is important enough to implement. I don't have the time for the own Editor (you have to handle really big files for example) but i can do the renaming thing behind the scenes (remember renaming = copy+delete until a better solution is found).
(4) on first app start i have really no solution in determining how the value is set (no access on this key). So my solution was to set this text ("Not set - (can't read from registry)" until you set a value => then i save this value local to the app, and set it every time the app starts (It gets reset every time i connect the device to the PC anyway)
(5) "search the registry": I thought on this one... But this will not be of much use as we have not really much read access
NOTE: The Problem with the registry is that we have FULL WRITE access trough the provxml method but not very much READ access (HTC COM .dll)
(6) really? I'm satisfied with the current behavior. Without searching I don't know if this is a small change maybe it is, maybe not. At least it looks like one but that doesn't mean anything
reddragon

Thanks for the response, reddragon. I'm at work right now, so the .mobi thing will have to wait. It's a very common request among WP7 users around here, though.
I've found that selecting the Edit context item will open any file in Word, which is typically sufficient for viewing and even editing purposes! True plain text files open fine regardless of extension, and even binary files will usually have enough ASCII in them to determine useful info. You can also send any file (via email) from Word, if you want to email an attachment rather than just transfer to a PC.
Unfortunately, I've found that XML files just... don't work. Double-clicking them opens IE, which complains that it can't handle that file type. Selecting Edit on them looks like it's opening some Office app, but the app then closes and drops back into Advanced Explorer (no error). This is the currently problematic filetype, as a *lot* of data is stored in XML.
The "Registry Editor" app already provides registry search (and despite the security restrictions on read it *mostly* works) but without system copy-paste it's tricky moving data between apps. I enjoy being able to pan between the FS and registry... hell, I want a Windows (desktop) app that does this, now.
It looks like there's FS search (an option on the command bar, and a text box that appears) but I can't get it to do anything. Pressing Enter has no effect, tapping either Refresh or Search again just reloads the page. Am I using this right? It would be great to be able to either scroll long folders (\Windows) or find a filename behind a bunch of GUIDs.
Some files show as "0 b" size, even though they almost certainly aren't. Is that just because some program has an exclusive lock on them and their size can't be read in that state?
Any chance of the ability to create folders in the GUI (I think I see how to do it with provxml files, but that's not exactly convenient)?
Thanks for the explanations on the registry. I was wondering how you could write to locations that you can't read from... Also, I didn't know the sideload limit resets itself. That's something I'll have to watch out for, as I'm near the nominal sideload limit already. Hmm... maybe I should look into writing an app that lets the phone install a .XAP directly, to minimize the amount of PC connecting that's needed.
Sorry, I know that's a lot of comments and questions. If it helps, I showed this to a couple of other HD7 owners today, and the immediate response of both of them was "I've got to get that!" This is a great app, super-convenient and good for making the occasional Samsung Focus owner jealous ;-D
Actually, I'm a developer myself (mostly C/C++, but I know C#). I'll crack a look at the source when I get a chance (probably this weekend) but would you be interested in a patch if there's something I can improve? One thing I might add is an optional "Did you mean that?" prompt on the Back button, as it's a little too easy to hit and knock you clear out of the app (optional of course, as I understand some people don't have such problems).
Thanks again!

does anyone know the latest ETA on compatibility for samsung devices?

Some Answers
GoodDayToDie said:
Thanks for the response, reddragon. I'm at work right now, so the .mobi thing will have to wait. It's a very common request among WP7 users around here, though.
Click to expand...
Click to collapse
Like I said: I will pm you most likely, today or this weekend.
GoodDayToDie said:
I've found that selecting the Edit context item will open any file in Word, which is typically sufficient for viewing and even editing purposes! True plain text files open fine regardless of extension, and even binary files will usually have enough ASCII in them to determine useful info. You can also send any file (via email) from Word, if you want to email an attachment rather than just transfer to a PC.
Unfortunately, I've found that XML files just... don't work. Double-clicking them opens IE, which complains that it can't handle that file type. Selecting Edit on them looks like it's opening some Office app, but the app then closes and drops back into Advanced Explorer (no error). This is the currently problematic filetype, as a *lot* of data is stored in XML.
Click to expand...
Click to collapse
Yeah the best way to handle the edit mode would be an editor inside the app, but that's quite some work i guess... So if somebody is willing to write such a control just contact me!
But the current workaround is quite simple: Upload your file, edit it with the powerful editors you know and send it back to the phone...
In fact what i did was send the complete windows/applications folder and all files that where successfully send can be edited (on the others you have no access anyway).
GoodDayToDie said:
The "Registry Editor" app already provides registry search (and despite the security restrictions on read it *mostly* works) but without system copy-paste it's tricky moving data between apps. I enjoy being able to pan between the FS and registry... hell, I want a Windows (desktop) app that does this, now.
Click to expand...
Click to collapse
Well I think it's not that difficult to implement a search for registry. It's funny to say that all the time but I thought on this one too and if you look on the source code you will see that i positioned the search/filter text box out of the explorer pivot to use it for registry search or other purposes. If you find it really that useful with the current read restrictions... yeah I should just implement it...
GoodDayToDie said:
It looks like there's FS search (an option on the command bar, and a text box that appears) but I can't get it to do anything. Pressing Enter has no effect, tapping either Refresh or Search again just reloads the page. Am I using this right? It would be great to be able to either scroll long folders (\Windows) or find a filename behind a bunch of GUIDs.
Click to expand...
Click to collapse
In fact this is a filter function so that large folders can be loaded much faster. Just enter "a*" and make the keyboard disappear (tab anywhere else) and you see only the files/folders starting with "a". I don't know why "enter" on keyboard doesn't do anything, I will look into this. I should update the usage in my first post, thanks.
GoodDayToDie said:
Some files show as "0 b" size, even though they almost certainly aren't. Is that just because some program has an exclusive lock on them and their size can't be read in that state?
Click to expand...
Click to collapse
yep.
From the htc COM call i get 0 bytes....
GoodDayToDie said:
Any chance of the ability to create folders in the GUI (I think I see how to do it with provxml files, but that's not exactly convenient)?
Click to expand...
Click to collapse
Hehe, i thought on this one too as it is already implemented (just create a folder in UploadRoot drop a file and start downloading it to the phone => the folder gets created). I will look into this.
Can you (or anybody) provide me with an example on how to rename a folder via provxml. And in Yaaf.WP7.NativeAccess.IO.File i have in the "Move" method some code commentated. Can somebody please un-comment, debug and tell me why the hell this provision-xml is invalid / not working, thanks.
(ProvisionXml is completely new to me as this is my first smartphone)
GoodDayToDie said:
Thanks for the explanations on the registry. I was wondering how you could write to locations that you can't read from... Also, I didn't know the sideload limit resets itself. That's something I'll have to watch out for, as I'm near the nominal sideload limit already. Hmm... maybe I should look into writing an app that lets the phone install a .XAP directly, to minimize the amount of PC connecting that's needed.
Click to expand...
Click to collapse
I didn't look into that but i think it is not enough to simply create the guid folder and drop content there... Anyway you can use the "NativeAccess" Projekt to get all the access i used in the Explorer. But you have to create links from your main projekt to the COM-dlls so they get included into the xap file.
GoodDayToDie said:
Sorry, I know that's a lot of comments and questions. If it helps, I showed this to a couple of other HD7 owners today, and the immediate response of both of them was "I've got to get that!" This is a great app, super-convenient and good for making the occasional Samsung Focus owner jealous ;-D
Click to expand...
Click to collapse
That's what keeping me up i guess
GoodDayToDie said:
Actually, I'm a developer myself (mostly C/C++, but I know C#). I'll crack a look at the source when I get a chance (probably this weekend) but would you be interested in a patch if there's something I can improve? One thing I might add is an optional "Did you mean that?" prompt on the Back button, as it's a little too easy to hit and knock you clear out of the app (optional of course, as I understand some people don't have such problems).
Click to expand...
Click to collapse
I'm always interested in any patch especially support for other devices (I have a htc so I can't debug stuff for other devices :/ )
Yeah there could be an option for that. It's pretty easy to implement so... But i don't have this problem so i didn't realised that one.
GoodDayToDie said:
Thanks again!
Click to expand...
Click to collapse
Thank you for your feedback
Muzzy777 said:
does anyone know the latest ETA on compatibility for samsung devices?
Click to expand...
Click to collapse
Well I answered this on the first page of the thread already, thanks.
EDIT: I updated the program and my first post and implemented some of your feature requests
reddragon

Configuration Service Provider Reference for Windows Mobile Devices

Have you used the forum-search? You'll find a post which describes you how to get these books to your phone (it's by me). I can't give you the link because I send this from my HD7.

really great app. Also like the pc<->phone feature
I use it now very often, so I think it needs:
-2 Filebrowser Tabs
-or an option to "bookmark" certain folders

diboze said:
really great app. Also like the pc<->phone feature
I use it now very often, so I think it needs:
-2 Filebrowser Tabs
-or an option to "bookmark" certain folders
Click to expand...
Click to collapse
I talked to other people, at first this feature looks awesome, but after some time you would see that you don't use 2 tabs!
The bookmarking thing is a good idea...
Elerador said:
Have you used the forum-search? You'll find a post which describes you how to get these books to your phone (it's by me). I can't give you the link because I send this from my HD7.
Click to expand...
Click to collapse
I'm looking into amazon kindle... what i can do for sure is copy the file into the kindle folder and start amazon kindle...
But i forgot how to start a program via app-guid. I remember that i saw an COM.dll which can do that.
__ow said:
Configuration Service Provider Reference for Windows Mobile Devices
Click to expand...
Click to collapse
i know that link but i don't see how you can move folders (if it is possible)
reddragon

Love the update! Thanks for cluing me in on the workings of the filter; I wasn't trying wildcards and it therefore looked like it was always empty.
That said, a bug report (reproed on the older version too):
Registry manual mode can crash with a System.ArgumentException "Invalid fullpath".
Start Advanced Explorer
Pan to Registry
Tap "edit manual"
Observe exception
App crashes on hitting OK

Changing Registries

I want to do the following:
xboxmod said:
Google
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\SearchScopes]
"DefaultScope"="Google"
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\SearchScopes\Google]
"URL"="http://www.google.com/m?hl=en&gl=us&client=ms-hms-tmobile-us&q={searchTerms}"
Click to expand...
Click to collapse
I installed Registry Editor from TouchXperience on my Samsung Omnia 7. I went to:
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\SearchScopes]
And changed DefaultScope's value to "Google" (without the quote obviously). For:
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\SearchScopes\Google]
I need to create a new key and name it Google in SearchScopes, right?
I tried to do that, but Registry Viewer could not create the new key. I tried multiple times, but it wouldn't work. I get the following error:
Unable to create registry key "Google".
I also accidentally created a new value called "a" but when I try deleting it, I get a similar error. I get the following error:
Unable to delete registry value "a".

TouchXperience registry editor uses the COMRilClient.dll from Samsung to get access to the registry on Samsung devices. This dll only allows read/write of dword and string values. It does not allow to create/delete keys and it does not allow to delete values. It is also restricted to keys that have permissions for Elevated Privileges. It has no access to key that need TCB permissions.
At the moment I am working on "WP7 Root Tools" which allows you to read and write to the entire registry. At the moment I am using a little part of the Samsung drivers, so for now it is only suitable for Samsung devices. I will try to make it work for all devices in time. With a work-around I have access to the phone with TCB privileges.
I have been working on it for quite a time now and I am close to releasing an alpha version. It has been delayed, because last month my grandpa died and now my mother is on Intensive Care because she had an aneurism and needed brain surgery. She is recovering in very little steps and I pray she will be fully recovered after rehabilitation.
So I am not fully committed to hacking at this moment, but I promise it won't be very long before I can release a working alpha version.

Thanks for the info, though does that mean I can't even remove the "a" value that I accidentally added?
I'm sorry to hear about your family situation. I hope your mother fully recovers sooner than later.

Chaoticaa said:
Thanks for the info, though does that mean I can't even remove the "a" value that I accidentally added?
Click to expand...
Click to collapse
Yes, that's right. But it probably won't do any harm. So don't bother.
Chaoticaa said:
I'm sorry to hear about your family situation. I hope your mother fully recovers sooner than later.
Click to expand...
Click to collapse
Thanks.

Heathcliff74 said:
But it probably won't do any harm. So don't bother.
Click to expand...
Click to collapse
Yeah, it doesn't even make sense for it to have any affect unless something is looking for that value name in my registry. I'm just a neat-freak that hates that extra accidental value a lot more than the fact that I can't do what I was trying to accomplish.

Chaoticaa said:
Yeah, it doesn't even make sense for it to have any affect unless something is looking for that value name in my registry. I'm just a neat-freak that hates that extra accidental value a lot more than the fact that I can't do what I was trying to accomplish.
Click to expand...
Click to collapse
You could always hard-reset your phone

Hahaha not that bothered by it.