Develop Bugs

AKU3.2 Rom Languages (and Packs)

Hello!
I started this thread in order to put all valuable information about language packs in here.
Here is also an answer from Ltd.Cmd.Ivan:
Lt.Cmdr.Ivan said:
Yes it is a option.
Unfortunately i do not have the resource files for different languages. But there are some people who asked how to do this. ATM i do not remember who. Perhaps you and the people who asked can start a team who makes the necessary changes to have a german language pack. If you manage to get it as an addon option, it would be very easy to make the translations for other languages too. Someone already did this (i think it was at buzzdev.net) for the aku2 roms. Perhaps you can find that project and show me where to download it, including the complete stuff. Maybe it is small enough to integrate 2 or 3 different languages in a rom, and choose after startup which one to use.
Before this can be done it has to be tested (This is your chance ) , if it is completely functioning with the aku3.2 stuff.
BlackICE said:
Hi!
As far as I know, the AKU3.2 Rom has language packs included or can have it included, which can be chosen at first startup. Your Rom did not have this.
Is there any possiblity that your Rom can have german language included?
If you need somebody to test Rom with language packs I would love to.
cu
Hakan
aka Black ICE
Click to expand...
Click to collapse
Click to expand...
Click to collapse
As far as I know, language packs from microsoft are preloaded into RAM (or ROM?) and can be chosen on initial start. After choosing right language pack, it is applied to the ROM and all packs are erased.
so we have 2 possibilities:
1. make our own translations
2. try to save the language packs from microsoft
as for number 1 we need to know, how a language pack is packaged - at least Buzz should know this, as Buzz already offers some language Packs for AKU2 on his website
as for number 2 we need some method to save the language packs from deletion so we can transfer them from the pocketpc.
any other ideas?

If I could get my hands on a new device with the language packs already on it (new AKU 3.2 device that has not been used yet), I could figure a way to extract them. The problem is that I am not aware of any devices with AKU 3.2 and the language packs that are available for sale.
Are there any devices being sold with these features yet?
-Jwrightmcps

I think, there are no AKU3.2 devices available yet. I assume Microsoft is shipping AKU3.2 installation packs to developers or cell phone network to make their customizations.
And that is a way how Ivan and others got AKU3.2: just somebody working for a developer or cell phone network made a copy of this or similar. Is that right, what I think?

Or some simply get their hands on a device prototype
This is how I got my copy of AKU 3.2 (from HTC HERMES) but it did not have any language packs other than English...
I am also connected in the industry (state-side) and have heard nothing about the shipping of any AKU 3.2 language packs (OEM or Operators) yet
-Jwrightmcps

it would be nice
it would be very nice to have the Arabic language not as a third party sw

Jwrightmcps said:
Or some simply get their hands on a device prototype
This is how I got my copy of AKU 3.2 (from HTC HERMES) but it did not have any language packs other than English...
I am also connected in the industry (state-side) and have heard nothing about the shipping of any AKU 3.2 language packs (OEM or Operators) yet
-Jwrightmcps
Click to expand...
Click to collapse
Hmmm, that means either we must wait for availability or we make our own language packs.
Translations should not be a problem but the tricky part is the packaging into an installable. I wonder how microsoft wants to make an installed language pack to be permanent even after hard reset...

do a web search for 'Lang_v2.zip" this is a fairly complete guide for translating language files in WM5. It also has a direct german to english example. Also, if you aren't using Bepe's kitchen, you should. I recently tried to translate a chinese AKU 3.2 to english, it was build 15633, and the next closest english ROM I had to compare to was build 15603. It came out fairly well, though i couldn't change the keypad. it had no msim, but did have an sskim file. Also, use the DSMtool by bepe, this saves so much time in packaging files.
Regards,
Jason

Greek language
Does anyone knows how to unlock an existing rom in order to use it i have greek Wizard Vodafone V1640 and Qtek Hellas Does not support it either Vodafone Greece. I have downloaded the latest firmware but it is locked. i just need to get the greek keyboard and language for my contacts is this possible

Excellent, i found the guide and will have a look at it as soon as possible.

Lt.Cmdr.Ivan said:
Excellent, i found the guide and will have a look at it as soon as possible.
Click to expand...
Click to collapse
I looked back into some of my old favorites, and found his forum here. Enjoy.
Regards,
Jason

It should write a file (Windows\test) and a registry entry ([HKEY_LOCAL_MACHINE\Test]"by"="bepe") to the rom.
This changes would also exists after a hard reset.
but, the package is not working yet, cos of signing... (I managed to get it working on my device, but thats all)
I think this is the way MS will distribute the updates....

[Progress of] WM6 translation to German

Started this project some days ago...
done:
replaced localized OS packages
[*]initflashfiles.dat
[*]extracted all OEM mui's from an existing German ROM
[*]removed T-mobile stuff from the original WWE WM6 ROM
[*]check the registry
[*]check some packages
to do:
Add MSN

bepe said:
Started this project some days ago...
done:
replaced localized OS packages
initflashfiles.dat
to do:
extract all OEM mui's like Backlight.exe.0407.mui from an existing German ROM
check the registry
completely remove the T-mobile stuff from the original WM6 ROM
Click to expand...
Click to collapse
great , good job bepe , keep going ))

bepe said:
Started this project some days ago...
done:
replaced localized OS packages
initflashfiles.dat
to do:
extract all OEM mui's like Backlight.exe.0407.mui from an existing German ROM
check the registry
completely remove the T-mobile stuff from the original WM6 ROM
Click to expand...
Click to collapse
bepe, you can use my kitchen to easily extract files/ replace files/ edit registry/ edit initflash ... i hope youll make a good translation

Gimme some work to do
Hi !
Great Idea, give me some work to do, maybe translating / checking translation, or stuff like this.
PM me
soniX

hey bepe
this is great!
same goes for me. just let me know if i can help.

help wanted
same for me...

Thanks for the offering, but I'm mostly fighting with the configuration of that ROM. The translation was the easy part, cos I was able to use things from existing German ROMs...
I think there will be a beta the next days and I would need you all to check that for bugs

You've got a guinea pig right now
If it does not brick my phone, I will help you testing out...
soniX

can you fix swedish rom
can you fix swedish rom Wm6

If it does not brick my phone, I will help you testing out...
Click to expand...
Click to collapse
That’s the problem...
I don’t have a Hermes, so I cannot try it myself.
Bad thing is that I cannot guaranty that the ROMs I need tested would not brick a device.
I do my best, but no one is perfect and it is easy to brick a Hermes
asukal is testing the ROMs for me... he is a really good friend and I'm sure we will find a solution in case of bricking his device.
BTW, he will test the beta too... so it should not brick your devices

can you fix swedish rom Wm6
Click to expand...
Click to collapse
no, sorry... I can only make a German rom at the moment

1) If you substitute some files, reg values etc.. why you have to rebuild the Os and don't make a cab file installer??
2) Can you add to the first post ALL the registry keys changed & all the files substituted (and other things done)?
..also i want to start an italian translation project... but for now i'm searching spellcheck & words dictionary... and fixing keyboard issues..

SkizZO said:
1) If you substitute some files, reg values etc.. why you have to rebuild the Os and don't make a cab file installer??
Click to expand...
Click to collapse
the cab would be to big... about 6MB... also I think that it is better to have a clean rom
SkizZO said:
2) Can you add to the first post ALL the registry keys changed & all the files substituted (and other things done)?
..also i want to start an italian translation project... but for now i'm searching spellcheck & words dictionary... and fixing keyboard issues..
Click to expand...
Click to collapse
you should try my package tool
use it to build packages of your rom and you will see that there are localized packages like: Base_Lang_0409
all files inside this localized packages should be replaced

Bepe's tool is great, give it a try.

are there any news?
greets
voxid

some screens

and one more

first beta of the rom (torrent)

I'm not sure the torrent will work, cos I never used that to share things...
so here is another link:
http://rapidshare.com/files/20858871/HER_OS_WM6_GER.rar.html

bepe said:
I'm not sure the torrent will work, cos I never used that to share things...
so here is another link:
http://rapidshare.com/files/20858871/HER_OS_WM6_GER.rar.html
Click to expand...
Click to collapse
What is the basic for your german rom? Auf welcher ROM-Variante basiert dein ROM?
I would prefer WM6 for Hermes LVSW Edition (WM6 Pro Style).

Question on cooking with an official rom (Language Related)

Hi gurus,
I have tried several official rom and I would like to know on how to I release the ULDR as Bepe had mentioned in his rom thread on the official roms.
i have just learn cooking and have managed to alter offical roms to my likings. but the storage space is just not enough on the official roms, even after cooking.
thus, can any kind chefs share with me on how to release more storage while cooking. I believe this would be relatively useful for all newbie cookers.
Thanks a million!

ruffruff said:
Hi gurus,
I have tried several official rom and I would like to know on how to I release the ULDR as Bepe had mentioned in his rom thread on the official roms.
i have just learn cooking and have managed to alter offical roms to my likings. but the storage space is just not enough on the official roms, even after cooking.
thus, can any kind chefs share with me on how to release more storage while cooking. I believe this would be relatively useful for all newbie cookers.
Thanks a million!
Click to expand...
Click to collapse
clear out ALL the crap, ringtones, wav files, welcome center, autoupdate, and apps you dont want / use.

walshieau said:
clear out ALL the crap, ringtones, wav files, welcome center, autoupdate, and apps you dont want / use.
Click to expand...
Click to collapse
even if i do that, my total storage is just 80mb.
how do i gain more?
can you teach me?

ruffruff said:
even if i do that, my total storage is just 80mb.
how do i gain more?
can you teach me?
Click to expand...
Click to collapse
what tools are you using to extract the nb files?

walshieau said:
what tools are you using to extract the nb files?
Click to expand...
Click to collapse
i am using the diamond kitchen posted in this forum.
kind of straight forward, like pressing 1 or 2 to cook or rebuild roms

You have to break it into steps, and stop after XIP merge with OS (just before buildOS)
This is where you can add, remove anything. Packages, etc.

i have managed to cook up a good storage space rom with the advice from the seniors here as well as the wikis.
but now i have another problem.
i have managed to turn one of the latest official WWE rom into Sim. Chinese. although, i have replaced all the wince.nls in the WWE rom to the asian WWE, but after cooking and flashing, it does not shows the chinese regions.
i have tried several ways but still couldnt find a way to solve this.
for replacing wince.nls in roms, is there areas which i need to look at, or files i need to replace?
btw, the cook WWE rom is entirely in chinese now on my device, the only left unsolve is the wince.nls.
one side track question, how do i disable error reporting? every now and then i received a pop up screen saying that certain task has caused an error ...

can anyone kindly help?

Ruff, if ever there's anything you don't know how to do with tools, just do it on your handset, dump and rebuild the rom. As simple as that.
So just disable the error rep and happy dumping.
^.^

i almost give up here.
i have replace the default.hv and user.hv with the one found in the CHT officlal rom but still, my Cooked WWE rom is still unable to initialise the asian wince.nls ...
what am i missing here?
can any kind soul shed some light?
2nd issue> connectionsetup keep returning an error in the first boot. how do i stop this?

hi all,
thanks for everything.
i just found out why the wince.nls is not used correctly.
after replacing the os.nb in the ROM\ folder with the os.nb from the offical chs rom, it works.
although, i dun understand why but it works now. chinese region is selectable.
i also found that the temp\dump_XIP is practically useless, as the kitchen build os without using it at all ...
guess i still need to figure out more stuff manually and stop using the CMD script. it may be the CMD scripts that is set to extract xip from os.nb when cooking rom. thus, rendering the dump_xip not being used.
thanks. if there is any advice for me, please kindly let me know.
i love XDA and thank you JugglerLKR so much for the kitchen.

Hi ruffruff,
Could you please give me any advice on how to change the OS language ? I had some translation experience on the htc wizard but it was a nightmare. I see it seem easier on diamond roms. It would be great If I could change some of the "plates" cooked on here in Italian. I really hate having the phone in wwe.

smogdragon said:
Hi ruffruff,
Could you please give me any advice on how to change the OS language ? I had some translation experience on the htc wizard but it was a nightmare. I see it seem easier on diamond roms. It would be great If I could change some of the "plates" cooked on here in Italian. I really hate having the phone in wwe.
Click to expand...
Click to collapse
hi smogdragon,
i believe you already have a kitchen at hand.
if so, you will need to find a italian rom first and dump the rom. after which, save the dump. then find the WWE rom which you like and wish to change it to italian. dump the WWE rom and replace all the 0409 packages and files to your italian packages and files which you have dump earlier.
cook the rom and flash.

finally, i have everything working out nicely.
ram available after first boot is still not as much as the senior cookers here.
i have 2 requests and hope that some kind soul or seniors can help me with:
1) Can anyone release to me the correct backward compatible netcf3.5 for rom cooking?
2) Can anyone release to me the 20270 XIP and teach me how to port it to my cook rom?
thanks and hope that some kind soul can assist me.

I see Nothing is changed. DO you replace all the files by hand ? Or have some kind of automated procedure ? The problem for me is I've not seen any .93 build in italian yet so I don't know where to find the files without messing the build.

smogdragon said:
I see Nothing is changed. DO you replace all the files by hand ? Or have some kind of automated procedure ? The problem for me is I've not seen any .93 build in italian yet so I don't know where to find the files without messing the build.
Click to expand...
Click to collapse
u dun really need the exact build for the italians mui files.
just find an available italian rom and extract all the mui files out.
in english rom, replace those 0409 folders and files with your MUI files by HAND. hehe, no pain no gain ...
do more reading on the forum. i am no expert. like you, i am also a newbie/noob in rom cooking. just trial and error. i too need guidance from the expert but in the meantime, when they are not responding, you have to DIY...
cheers

ruffruff said:
u dun really need the exact build for the italians mui files.
just find an available italian rom and extract all the mui files out.
in english rom, replace those 0409 folders and files with your MUI files by HAND. hehe, no pain no gain ...
do more reading on the forum. i am no expert. like you, i am also a newbie/noob in rom cooking. just trial and error. i too need guidance from the expert but in the meantime, when they are not responding, you have to DIY...
cheers
Click to expand...
Click to collapse
Hi,
I'm trying to cook my own rom to convert the official Russian rom into english.
I've a quick question about the replacing the 0409 folder.
I'm going to be going from 0419 folders (russian) to 0409 (english), do I delete the 0419 directories and just add in the 0409 ones, or do I have to delete the 0419 folders and then rename the 0409 to 0419.
I'm guessing just delete the 0419 ones and stick in the 0409 instead, but want to make sure.
Is there anything else I need to do. I guess I'm looking for all the 0419 folders in the \OEM and \SYS directories?
Does anyone know if this will get around the region lock on a Russian Diamond?
Plus is there anything else I will need to do?
Do I have to do anything with XIP, that's something I'm really not sure about?
Cheer
Andrew

Collection of MUI files for all languages

Hi,
i would like collect MUI files here.
This makes it easier, to create a the new Rom.
The attached Zip contains (more coming later):
AudioManager.exe.0407.mui
Camera.exe.0407.mui
CommManager.exe.0407.MUI
ConnectionSetup.0407.mui
flashresource.dll.0407.mui
getMMSCtxMenuInfo.dll.0407.mui
HTCAlbum.exe.0407.mui
HTCSettings.dll.0407.mui
htcStartMenuService.dll.0407.mui
HTCUSBToPCPopUp.exe.0407.mui
Manila2D.exe.0407.mui
MMSTransport.dll.0407.mui
MP3Trimmer.exe.0407.mui
NetworkPluginRes.dll.0407.mui
wfg
Starbase64

I like the idea. Thanks for starting the thread, starbase! Do I have any luck to find a Romanian package?!

Awesome DUDE!!! man cooking is getting easier and easier around here with all these wonderful resourses!!

Good idea 405 mui comming soon
I will put here my CZECH muis later
One thing is that you have to include version used with each mui
like HTC.Album.1.0.1030.720 or every mui with responding dll or exe file
like sys muis from 19212 dont work on new sys 20755 so you have to mix SYS files
BUT GOOD IDEA

Yes! Thanks for sharing those. Although I do not have anything to contribute I just wanted to say that starbase64's post helped narshorn make a better german ROM (a year after starbase64 had the great idea to share).
Thanks again and keep sharing everyone!

keeping alive old threads huh?
watch on dev and hack section there are all lang packages.

anyone can help me to know where i can find MUI files inside the rom??? i have to start add more locals.
cheers

mui files are all over the SYS and OEM folders... you neeed to catch them all.... in fact all the EXT pkgs needs a MUI but not all apps
Check the chef central repository thread with all the langs you want for SYS

Japanese WM6.1 ROM for X01HT

being tired of seeing too many protected roms floating around, i decided to make japanese wm6.1 cooking base files myself. it took me awhile, but i finally figured it out. i would like to share my experience of making a japanese wm6.1 rom for hermes here.
actually, it is not that difficult, and all i did was just assembling pieces from different official roms. so, i would NEVER call it my OWN rom or anything because every part of the original roms was developed by MS and HTC. (sorry, but i really think it's too funny many people, who know slightly better than others, put their names in the ver info, apply procection or whatever to their roms, and say "this is my own rom!" for something made out of other roms originally built by MS and HTC.... is this place for dev info sharing for similar-minded guys? donations?? c'mon!)
i will explain about the details step by step later. here's a rough tutorial.
things you need:
[tools]
Pandora Kitchen (thanks to mattk_r) for cooking and burning
http://forum.xda-developers.com/showpost.php?p=1364931&postcount=1
or
i prefer bepe's Extended Hermes Kitchen for WM6.1
http://rapidshare.com/files/88850555/HERMES_DEV_v2.1_Build_19199.rar
G'Reloc.exe as usual
http://forum.xda-developers.com/showpost.php?p=1524413&postcount=1
[roms]
bepe's kitchen (thanks to him!) for simple and working oem folder and xip (OEMXIPKernel only)
http://forum.xda-developers.com/showpost.php?p=1177762&postcount=1
x04ht (japanese softbank diamond) rom for most of the sys part
http://forum.xda-developers.com/showpost.php?p=2998164&postcount=1
htc hermes official wm6.0 rom simply for os.nb as a template
http://rapidshare.com/files/46467733/HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe
htc kaiser (or opal) official wm6.1 rom for dpi_96 files
http://rapidshare.com/files/157469239/Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.rar
http://forum.xda-developers.com/showthread.php?t=441689
s11ht (japanese emobile kaiser) official rom for 0411_dpi_96
ftp://htc-jp.com/EM/S11HT_firm_V2_6_881_0_JPN.exe
[basic strategy]
[oem]
1) bepe's oem folder is very simple and clean for cooking (some modifications are necessary in *.rgu files, tho)
2) replace OEM.cer by the one from x04ht rom
[rom]
1) basically, you can take OEMXIPKernel from bepe's xip or from htc hermes official wm6.0 rom
2) MSXIPKernel and MSXIPKernelLTK are from x04ht rom or whatever you want
3) use os.nb from htc hermes official wm6.0 rom just as a template
[sys] (tricky)
1) the base is opal sys. but remove all the language specific (0409) folders.
2) take the language specific but non-vga folders from x04ht, x05ht or whatever wm6.1 japanese rom (0411 folders not including dpi_192)
3) take language specific qvga folders (the 0411_DPI_96 folders) from s11ht
4) take .vm folder, packages.* in metadata folder, and service.exe in os folder, shell32.exe and shellres.dll in shell folder from hermes official or bepe's sys. (irda is not included in opal rom. take them from bepe's rom if you wanna use irda.)
[points]
1) don't forget to copy WinCENLS_Lang_0411 into your sys. otherwise, the device does not boot since WinCENLS_Lang_0411 is not included in xip.
2) if you take sys from any newer versions, taskmgr does not work since it is not signed by softbank. remove mxipupdate_taskmgr_shell_1.provxml in base_lang_0411. it's useless, anyway.
3) this method does not create shotcuts in windows\appbuttons. you need create those shortcuts with japanese names yourself to make the buttons work properly. (does anyone know how these shortcuts are automatically created?)
4) os ver info is stored in the original files. (read here for details: http://forum.xda-developers.com/showpost.php?p=1172925&postcount=1) you can change the ver info as you want, but i REALLY hate to see ver info with someone's name or some personally customized splash screeens. so, the ver info does not reflect the actual ver you take all the files from.
5) i don't think this works only with hermes but with any other qvga devices (you have to change xip part.) hope many other qvga device users can make (assemple?) their own japanese wm6.1 roms freely.
question:
i made a shortcut file with 14 japanese (2 byte) letters and put it in the windows directory, but the hermes did not boot. i changed the name to 13 japanese letters, and then it booted... are there any filename restrictions for east asian language files??

reserved for step-by-step guide

here is the japanese wm6.1 cooking base files for hermes
sys: 21014
xip: 21014
oem: basically based on htc oem
http://www.mediafire.com/?3almqggzvgy (OS.NB.payload is not included. place one in rom folder.)
sys: 20931
xip: 20931
oem: basically based on bepe's oem
others: commmanager and calc replaced for the touch looks
note: i did not modified the ver info in shellres.dll.0411.mui, and the ver info shown in control panel does not reflect the real os ver.
note2: this file is just for cookers. i will not provide the rom tuned up for my own use. i will not response to "please send me your rom" requests. (sorry)
link
http://www.mediafire.com/?2gfymtframj
you can use these files FREELY since i simply assembled them from the other roms. they don't belong to be from the beginning. (.VM is not included. take it from another hermes rom to cook it!!)
happy new year, and happy cooking!

Congrats and welcome to hermes cooking sir. if you need a copy of a unprotected rom of mine, just let me know, PM or post
Peace sir,
Joshua

Very big thank for you...
qtotter said:
sys: 20931
xip: 20931
oem: basically based on bepe's oem
others: commmanager and calc replaced for the touch looks
note: i did not modified the ver info in shellres.dll.0411.mui, and the ver info shown in control panel does not reflect the real os ver.
note2: this file is just for cookers. i will not provide the rom tuned up for my own use. i will not response to "please send me your rom" requests. (sorry)
link
http://www.mediafire.com/?2gfymtframj
you can use these files FREELY since i simply assembled them from the other roms. they don't belong to be from the beginning.
happy new year, and happy cooking!
Click to expand...
Click to collapse
I'm Andy. Thank you very much, qtotter-san.
Lately I've been thinkin about changing my handheld (I'm using BA and MPx200 at this moment). But, despite my condition as a Japanese language student, I would love to have a Handheld powered by Japanese Windows OS. To buy Japan's handheld seems to expensive for me, so I decided to search for Japanese ROM first, then decide which one shall I buy.
I've been searching all the time for Japanese ROM (not 日本語化 ROM but 日本語版 ROM FILES), n finally, look what I found here, not only Japanese ROM, but Hermes WM6.1 Japanese cooking base (very big thanks ^o^). I've tried to search in xda-developers, and some other forum, but still unable to find Japanese ROM. I'd also sent private messages to Japanese developers here, but still I have no idea where to find Japanese ROM.
And now, I found this thread. This really helps me.
心から感謝を申し上げます。(kokoro kara kansha wo moushiagemasu)
Once again thank You very much, qtotter-san. I really appreciate your hardwork.

qtotter said:
sys: 20931
xip: 20931
oem: basically based on bepe's oem
others: commmanager and calc replaced for the touch looks
note: i did not modified the ver info in shellres.dll.0411.mui, and the ver info shown in control panel does not reflect the real os ver.
note2: this file is just for cookers. i will not provide the rom tuned up for my own use. i will not response to "please send me your rom" requests. (sorry)
link
http://rapidshare.com/files/178421014/hermes_jpn_wm6.1_cooking_base.zip.html
you can use these files FREELY since i simply assembled them from the other roms. they don't belong to be from the beginning.
happy new year, and happy cooking!
Click to expand...
Click to collapse
can't download not....can you release again? I want to cook JP 6.1 too...thanks a lot!!

could anyone tell me how to build OEM MMSLite?

antony34 said:
can't download not....can you release again? I want to cook JP 6.1 too...thanks a lot!!
Click to expand...
Click to collapse
it seems like it's been downloaded 10 times, already... the link has been updated.
qt

qtotter said:
it seems like it's been downloaded 10 times, already... the link has been updated.
qt
Click to expand...
Click to collapse
Thanks a lot!!!

I hope the explanation of WM6.5,please!

Opal/Diamond Dialpad
if you use opal dialpad with japanese wm6.1 rom, smart dialing stops working. i happened to find a solution while playing with my diamond. just delete the following reg key to make smart dialing work.
[HKEY_LOCAL_MACHINE\Security\Phone\PhoneKeyMatch]
"SmartFilterFlags"=dword:00000002
This entry is in the *.rgu of Base_Lang_0411.

Download won't start
Is anything wrong with the server?

Woops!
Problem solved by deleting temporary internet files

updated japanese wm6.1 base to 21014
i will update msg #3 shortly.

Thanks qtotter sann!
but BT seem have problem, once flash it. it show have not BT device...

antony34 said:
Thanks qtotter sann!
but BT seem have problem, once flash it. it show have not BT device...
Click to expand...
Click to collapse
no bt applications are included. (drivers are included.) please use any bt apps from your favorite roms.

qtotter said:
no bt applications are included. (drivers are included.) please use any bt apps from your favorite roms.
Click to expand...
Click to collapse
But I can't avaliable BT at comm manager...

antony34 said:
But I can't avaliable BT at comm manager...
Click to expand...
Click to collapse
confirmed. i will check what causes this later.

May I ask some one to upload a COOKED Japanese rom?
I am far from to play with Hermes, have switched to Raphael.

qtotter said:
confirmed. i will check what causes this later.
Click to expand...
Click to collapse
qtotter sann,
Wifi & Camera seem also have problem.
Wifi & Camera sometime got error when avaliable.
I will keep report if still have problem or bug.
Thanks!