so i recoverd my one x with relocking it and installing the ruu from fastboot but now after i reboot it i want to reunlock my htc i check usb debugging and i have installed the drivers for my one x but when i get to fastboot mode and go to the cmd and i type adb devices my device does not show up what should i do??? p.s when i mount it in fastboot it shows fastboot usb so it is connected but i don't know what is the problem please help i want to reunlock it and install viper x and thxx
You have to use fastboot commands in fastboot. Type in "fastboot devices" and your device should show up. To flash the unlock token type in " fastboot flash unlocktoken Unlock_code.bin"
Sent from my HTC One X using xda app-developers app
Related
Hi, I am trying to Re-Lock my Galaxy Nexus GSM version, I've downloaded the SDK files (adb-mac and fastboot-mac) and all the image files and I am trying to execute the following commands:
adb reboot bootloader
fastboot flash bootloader bootloader-toro-primekk15.img
fastboot reboot-bootloader
fastboot flash radio radio-toro-i515.ek02.img
fastboot reboot-bootloader
fastboot flash radio-cdma radio-cdma-toro-i515.ek05.img
fastboot reboot-bootloader
fastboot -w update image-mysid-icl53f.zip
fastboot reboot-bootloader
fastboot oem lock
With the phone in normal mode I connect the USB cable to the computer, start Terminal windows and run the first command, "./adb-mac reboot bootloader" and the phone will boot into the "Fastboot Mode", then I try to execute "./fastboot-mac devices" to make sure the phone is connected and properly detected and I get nothing.
If I try to execute "./fastboot-mac flash bootloader bootloader-toro-primekk15.img" I get the message <waiting for device> and it will stay there forever.
Do you know what might be the problem ?, is there other method to do this ?, go back to Stock ROM and Re-Lock the device ?, thanks
You must also install the Samsung usb drivers. I have no idea how to do this in mac. A simple search will help you tho.
Reads a lot, first post.
Cannot find answer to my specific situation so I hope anyone can help.
ATM my phone boots to HTC logo and Vodafone logo and restarts after (infinite loop) (only when loader is connected)
phone is relocked and RUU wont run because battery life is below 30%. Cannot load any further (loads no longer then an hour)
Cannot unlock phone (fastboot flash unlocktoken Unlock_code.bin gives ERROR 0000008 00120000 of not known which error)
Anyone an idea?
Charge the phone by switching off for more than 5 hours
Sent from my HTC One X using Tapatalk 2
forumhookersdotcom said:
Charge the phone by switching off for more than 5 hours
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
( I'm in Fastboot menu)
when I power down phone automatic restarts to fastboot
In fastboot flash 5.8.4.0 cwm touch then enter recovery. That should get you charging
Typed with XDA Premium on OneX
walaway said:
In fastboot flash 5.8.4.0 cwm touch then enter recovery. That should get you charging
Typed with XDA Premium on OneX
Click to expand...
Click to collapse
I get this in CMD
sending 'recovery' <5742 KB>
FAILED <unknown status code>
finished. total time: 1.139s
maybe because bootloader is relocked?
Must be. Unlock it again first.
Sorry to have missed that step
Typed with XDA Premium on OneX
walaway said:
Must be. Unlock it again first.
Sorry to have missed that step
Typed with XDA Premium on OneX
Click to expand...
Click to collapse
When I try to unlock I get various errors like 00120000 or 00000008
FIX
problem is fixed. If u have same problem here is how to fix:
In your fastboot/adb folder create .bat file and type this:
"@echo off
:start
fastboot getvar battery-voltage
fastboot reboot-bootloader
ping /n 6 localhost >nul
goto start"
in cmd type fastboot reboot-bootloader (to fastboot USB)
start the .bat and there you can see how far your device is loaded. When it is at 3675 mV stop the program and quick type in a cmd: "fastboot flash unlocktoken Unlock_code.bin" (the file you got from HTCdev when you were unlocking first time). There, your phone is now unlocked. No need for RUU, just flash the newest CWM (5.8.4.0) and mount your SD, put an mod on it and flash out of ur problems
good luck
Hey guys!
while running the RUU instalation I get an error 152, some update error thing.
phone wont boot to recovery, all I have is the blakc screen with silver HTC logo and I have no idea what to do
any ideas?
Okay, run the RUU again but this time don't click next, instead:
Go to C:/Users/(Yournamehere)/AppData/Local/Temp
- search for "rom.zip" file
Copy it to your fastboot folder
Remember to relock your device before running an RUU! To do this from the HTC screen, type: "fastboot reboot-bootloader" and then
type 'fastboot oem lock'. To go back to the HTC logo, type: 'fastboot oem rebootRUU'
Then, on the HTC screen, use fastboot to flash the rom.zip file: "fastboot flash zip rom.zip"
This might take awhile and might fail once, but be patient and try again if it fails
After installation it most likely won't appear to do anything and in that case, type: "fastboot reboot"
But for now, the phon doesnt count as bricked?
And btw, fastboot commands will work whn im on the black slove htc screen? My recovery isnt openning...
ChuckTesta said:
But for now, the phon doesnt count as bricked?
Click to expand...
Click to collapse
Nope, as the screen is on. A brick is when you get no response from any of the buttons, even in combination
Sent from my Galaxy Nexus using XDA Premium HD app
tomascus said:
Okay, run the RUU again but this time don't click next, instead:
Go to C:/Users/(Yournamehere)/AppData/Local/Temp
- search for "rom.zip" file
Copy it to your fastboot folder
Remember to relock your device before running an RUU! To do this from the HTC screen, type: "fastboot reboot-bootloader" and then
type 'fastboot oem lock'. To go back to the HTC logo, type: 'fastboot oem rebootRUU'
Then, on the HTC screen, use fastboot to flash the rom.zip file: "fastboot flash zip rom.zip"
This might take awhile and might fail once, but be patient and try again if it fails
After installation it most likely won't appear to do anything and in that case, type: "fastboot reboot"
Click to expand...
Click to collapse
Quinny899 said:
Nope, as the screen is on. A brick is when you get no response from any of the buttons, even in combination
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
So cmd command will work in this state?
tomascus said:
Okay, run the RUU again but this time don't click next, instead:
Go to C:/Users/(Yournamehere)/AppData/Local/Temp
- search for "rom.zip" file
Copy it to your fastboot folder
Remember to relock your device before running an RUU! To do this from the HTC screen, type: "fastboot reboot-bootloader" and then
type 'fastboot oem lock'. To go back to the HTC logo, type: 'fastboot oem rebootRUU'
Then, on the HTC screen, use fastboot to flash the rom.zip file: "fastboot flash zip rom.zip"
This might take awhile and might fail once, but be patient and try again if it fails
After installation it most likely won't appear to do anything and in that case, type: "fastboot reboot"
Click to expand...
Click to collapse
I dont have a rom.zip in the local older, even after i run RUU...what could it be? Btw thebootloader was already locked.
Im trying to root my HTC One M8 and am in the process of unlocking bootloader via the HTCDEV website (http://www.htcdev.com/bootloader/unlock-instructions). I Have.....
booted the phone into fastboot
downloaded the fastboot binary
save it fastboot.exe to c:\fastboot
opened cmd and navigated to c:\fastboot and typed 'fastboot oem get_identifier_token'
as soon as i press return windows gives me an error message that fastboot.exe has stopped working.
Any ideas how to fix this issue??
BlockABoots said:
Im trying to root my HTC One M8 and am in the process of unlocking bootloader via the HTCDEV website (http://www.htcdev.com/bootloader/unlock-instructions). I Have.....
booted the phone into fastboot
downloaded the fastboot binary
save it fastboot.exe to c:\fastboot
opened cmd and navigated to c:\fastboot and typed 'fastboot oem get_identifier_token'
as soon as i press return windows gives me an error message that fastboot.exe has stopped working.
Any ideas how to fix this issue??
Click to expand...
Click to collapse
Try this.
I just wanted to flash my htc desire 816 with the custom recovery twrp.to do that I tried to unlock the bootloader.i just enterd the fastboot mode and gave the command in cmd "fastboot oem get_identifier_token".But it keeps showing "error remote unknown command".The only things fastboot is responding when using the command "fastboot devices".For every other commands it's showing the above mentioned error.pls help me to resolve this.