Anyone else have a problem with USB host mode and copying big files?
If so, can we fix this?
I have tried formatting my drive in FAT32,NTFS, and ext2. But the result is always the same, the drive dies if I copy a file bigger than 30 or 40 MB. I have tried stock, Faux123, and francoKernel as well.
The drive doesn't die at a specific MB each time, but it is generally around 30 MB but sometimes makes it to 80 or even 140 MB one time. I am trying to off-load some 700MB movies.
Here is the kernel message error:
<6>[ 1920.842529] max17040 4-0036: online = 1 vcell = 3547500 soc = 22 status = 3 health = 1 temp = 370 charger status = 0
<3>[ 1926.574005] EXT4-fs (sda1): Unrecognized mount option "fmask=0702" or missing value
<3>[ 1926.594299] EXT4-fs (sda1): Unrecognized mount option "fmask=0702" or missing value
<3>[ 1926.649810] EXT4-fs (sda1): Unrecognized mount option "fmask=0702" or missing value
<3>[ 1927.740753] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
<6>[ 1927.773895] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
<6>[ 1927.938781] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
<3>[ 1968.389251] L3 CUSTOM SRESP error with SOURCEMM2 info=0x84
<4>[ 1968.389434] ------------[ cut here ]------------
<4>[ 1968.389739] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:130 l3_interrupt_handler+0x31c/0x360()
<4>[ 1968.390045] L3 custom sresp error
<4>[ 1968.390197] Modules linked in:
<4>[ 1968.390686] [<c0055de4>] (unwind_backtrace+0x0/0xf8) from [<c00983a8>] (warn_slowpath_common+0x4c/0x64)
<4>[ 1968.390991] [<c00983a8>] (warn_slowpath_common+0x4c/0x64) from [<c0098454>] (warn_slowpath_fmt+0x30/0x40)
<4>[ 1968.391326] [<c0098454>] (warn_slowpath_fmt+0x30/0x40) from [<c0074898>] (l3_interrupt_handler+0x31c/0x360)
<4>[ 1968.391632] [<c0074898>] (l3_interrupt_handler+0x31c/0x360) from [<c00d45fc>] (handle_irq_event_percpu+0x50/0x178)
<4>[ 1968.391967] [<c00d45fc>] (handle_irq_event_percpu+0x50/0x178) from [<c00d4760>] (handle_irq_event+0x3c/0x5c)
<4>[ 1968.392150] [<c00d4760>] (handle_irq_event+0x3c/0x5c) from [<c00d6aec>] (handle_fasteoi_irq+0xbc/0x164)
<4>[ 1968.392456] [<c00d6aec>] (handle_fasteoi_irq+0xbc/0x164) from [<c00d3f50>] (generic_handle_irq+0x2c/0x40)
<4>[ 1968.392791] [<c00d3f50>] (generic_handle_irq+0x2c/0x40) from [<c004904c>] (asm_do_IRQ+0x4c/0xac)
<4>[ 1968.393096] [<c004904c>] (asm_do_IRQ+0x4c/0xac) from [<c004eb08>] (__irq_svc+0x48/0xe4)
<4>[ 1968.393402] Exception stack(0xc0799f28 to 0xc0799f70)
<4>[ 1968.393554] 9f20: c0799f70 3b9aca00 4c534d85 000001ca 4c4bda2c 000001ca
<4>[ 1968.393859] 9f40: 000003ff c1192210 8000406a 412fc09a 00000000 00000000 00000000 c0799f70
<4>[ 1968.394042] 9f60: c007c690 c0068380 00000013 ffffffff
<4>[ 1968.394348] [<c004eb08>] (__irq_svc+0x48/0xe4) from [<c0068380>] (omap4_enter_idle_wfi+0x48/0xd4)
<4>[ 1968.394683] [<c0068380>] (omap4_enter_idle_wfi+0x48/0xd4) from [<c03af838>] (cpuidle_idle_call+0x94/0x118)
<4>[ 1968.394989] [<c03af838>] (cpuidle_idle_call+0x94/0x118) from [<c0050538>] (cpu_idle+0xbc/0xfc)
<4>[ 1968.395172] [<c0050538>] (cpu_idle+0xbc/0xfc) from [<c00088ac>] (start_kernel+0x298/0x2e8)
<4>[ 1968.395477] [<c00088ac>] (start_kernel+0x298/0x2e8) from [<80008040>] (0x80008040)
<4>[ 1968.395782] Board Information: Tuna HW revision: 09 (Maguro 8th Sample), cpu OMAP4460 ES1.1
<4>[ 1968.396087] ---[ end trace 33de6ebe35ad56b6 ]---
<6>[ 1970.874023] max17040 4-0036: online = 1 vcell = 3532500 soc = 22 status = 3 health = 1 temp = 380 charger status = 0
<6>[ 1993.138793] usb 1-1: reset high speed USB device number 2 using musb-hdrc
<6>[ 2000.347503] fsa9480 4-0025: cable detect change, from 'usb-host' to 'unknown/none'
<6>[ 2000.347717] usb 1-1: USB disconnect, device number 2
<4>[ 2000.350708] fsa9480 4-0025: irq fired, but nothing happened
<6>[ 2000.351989] fsa9480 4-0025: nothing attached, keeping ownership of port
<6>[ 2001.361236] max17040 4-0036: online = 1 vcell = 3585000 soc = 21 status = 2 health = 1 temp = 380 charger status = 0
<6>[ 2003.287322] sd 0:0:0:0: Device offlined - not ready after error recovery
<6>[ 2003.287597] sd 0:0:0:0: [sda] Unhandled error code
<6>[ 2003.287628] sd 0:0:0:0: [sda] Unhandled error code
<6>[ 2003.287658] sd 0:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
<6>[ 2003.287689] sd 0:0:0:0: [sda] CDB: cdb[0]=0x2a: 2a 00 00 00 00 3f 00 00 08 00
<3>[ 2003.287719] end_request: I/O error, dev sda, sector 63
<3>[ 2003.287750] Buffer I/O error on device sda1, logical block 0
<4>[ 2003.287780] lost page write due to I/O error on sda1
<6>[ 2003.289154] sd 0:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
<6>[ 2003.289459] sd 0:0:0:0: [sda] CDB: cdb[0]=0x2a: 2a 00 00 00 21 e7 00 00 08 00
<3>[ 2003.291625] end_request: I/O error, dev sda, sector 8679
<3>[ 2003.291778] Buffer I/O error on device sda1, logical block 1077
<4>[ 2003.292114] EXT4-fs warning (device sda1): ext4_end_bio:258: I/O error writing to inode 13 (offset 217088 size 4096 starting block 1085)
<3>[ 2003.297576] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2003.297851] EXT4-fs error (device sda1): __ext4_get_inode_loc:4823: inode #13: block 5: comm libestool.so: unable to read itable block
<2>[ 2003.299560] EXT4-fs error (device sda1) in ext4_reserve_inode_write:5663: IO failure
<3>[ 2003.299743] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2003.300415] EXT4-fs error (device sda1): ext4_read_block_bitmap:353: comm libestool.so: Cannot read block bitmap - block_group = 0, block_bitmap = 3
<3>[ 2003.300720] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2003.301116] EXT4-fs error (device sda1): ext4_discard_preallocations:3828: comm libestool.so: Error reading block bitmap for 0
<3>[ 2003.301391] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2003.301727] EXT4-fs error (device sda1): ext4_read_block_bitmap:353: comm libestool.so: Cannot read block bitmap - block_group = 0, block_bitmap = 3
<3>[ 2003.302032] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2003.302398] EXT4-fs error (device sda1): ext4_discard_preallocations:3828: comm libestool.so: Error reading block bitmap for 0
<3>[ 2003.302703] EXT4-fs (sda1): previous I/O error to superblock detected
<3>[ 2003.303802] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2003.304168] EXT4-fs error (device sda1): ext4_free_branches:4377: inode #13: block 536: comm libestool.so: Read failure
<3>[ 2003.305358] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2003.305755] EXT4-fs error (device sda1): __ext4_get_inode_loc:4823: inode #13: block 5: comm libestool.so: unable to read itable block
<2>[ 2003.306365] EXT4-fs error (device sda1) in ext4_reserve_inode_write:5663: IO failure
<3>[ 2003.306518] EXT4-fs (sda1): previous I/O error to superblock detected
<3>[ 2003.336242] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2003.336364] EXT4-fs error (device sda1): ext4_find_entry:934: inode #2: comm libestool.so: reading directory lblock 0
<3>[ 2003.411834] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2003.412017] EXT4-fs error (device sda1): __ext4_get_inode_loc:4823: inode #2: block 5: comm ngs.android.pop: unable to read itable block
<2>[ 2003.412414] EXT4-fs error (device sda1) in ext4_reserve_inode_write:5663: IO failure
<3>[ 2003.412567] EXT4-fs (sda1): previous I/O error to superblock detected
<3>[ 2008.311859] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2008.312194] EXT4-fs error (device sda1): __ext4_get_inode_loc:4823: inode #13: block 5: comm bdi-default: unable to read itable block
<3>[ 2008.313110] EXT4-fs (sda1): previous I/O error to superblock detected
<2>[ 2008.313415] EXT4-fs error (device sda1): __ext4_get_inode_loc:4823: inode #2: block 5: comm bdi-default: unable to read itable block
<6>[ 2025.582702] fsa9480 4-0025: cable detect change, from 'unknown/none' to 'usb-host'
<6>[ 2026.233337] usb 1-1: new high speed USB device number 3 using musb-hdrc
<3>[ 2026.388244] usb 1-1: device v090c p6200 is not supported
<6>[ 2026.388427] usb 1-1: New USB device found, idVendor=090c, idProduct=6200
<6>[ 2026.388763] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 2026.389068] usb 1-1: Product: Generic USB2.0 card
<6>[ 2026.389221] usb 1-1: Manufacturer: Silicon Motion, Inc.
<6>[ 2026.389373] usb 1-1: SerialNumber: 12345678901234567890
<6>[ 2026.392089] scsi1 : usb-storage 1-1:1.0
<6>[ 2030.177124] fsa9480 4-0025: cable detect change, from 'usb-host' to 'unknown/none'
<4>[ 2030.180053] fsa9480 4-0025: irq fired, but nothing happened
<6>[ 2030.181335] fsa9480 4-0025: nothing attached, keeping ownership of port
<6>[ 2031.197509] max17040 4-0036: online = 1 vcell = 3600000 soc = 21 status = 2 health = 1 temp = 370 charger status = 0
<6>[ 2034.948303] fsa9480 4-0025: cable detect change, from 'unknown/none' to 'usb-host'
<6>[ 2035.182495] usb 1-1: USB disconnect, device number 3
<6>[ 2045.606109] fsa9480 4-0025: cable detect change, from 'usb-host' to 'unknown/none'
<4>[ 2045.609100] fsa9480 4-0025: irq fired, but nothing happened
<6>[ 2045.610321] fsa9480 4-0025: nothing attached, keeping ownership of port
<6>[ 2046.627288] max17040 4-0036: online = 1 vcell = 3602500 soc = 21 status = 2 health = 1 temp = 370 charger status = 0
<4>[ 2048.832824] ------------[ cut here ]------------
<4>[ 2048.832916] WARNING: at drivers/usb/musb/musb_host.c:125 musb_h_tx_flush_fifo+0x78/0x84()
<4>[ 2048.833068] Could not flush host TX2 fifo: csr: 2003
<4>[ 2048.833160] Modules linked in:
<4>[ 2048.833404] [<c0055de4>] (unwind_backtrace+0x0/0xf8) from [<c00983a8>] (warn_slowpath_common+0x4c/0x64)
<4>[ 2048.833526] [<c00983a8>] (warn_slowpath_common+0x4c/0x64) from [<c0098454>] (warn_slowpath_fmt+0x30/0x40)
<4>[ 2048.833679] [<c0098454>] (warn_slowpath_fmt+0x30/0x40) from [<c0366d70>] (musb_h_tx_flush_fifo+0x78/0x84)
<4>[ 2048.833862] [<c0366d70>] (musb_h_tx_flush_fifo+0x78/0x84) from [<c0367724>] (musb_cleanup_urb+0xb0/0xd4)
<4>[ 2048.834014] [<c0367724>] (musb_cleanup_urb+0xb0/0xd4) from [<c0367990>] (musb_urb_dequeue+0xfc/0x13c)
<4>[ 2048.834167] [<c0367990>] (musb_urb_dequeue+0xfc/0x13c) from [<c03441b0>] (usb_hcd_unlink_urb+0x60/0xac)
<4>[ 2048.834350] [<c03441b0>] (usb_hcd_unlink_urb+0x60/0xac) from [<c035d938>] (usb_stor_stop_transport+0x48/0x60)
<4>[ 2048.834442] [<c035d938>] (usb_stor_stop_transport+0x48/0x60) from [<c035c36c>] (command_abort+0x80/0x84)
<4>[ 2048.834564] [<c035c36c>] (command_abort+0x80/0x84) from [<c02d50ec>] (scsi_error_handler+0x3a4/0x49c)
<4>[ 2048.834716] [<c02d50ec>] (scsi_error_handler+0x3a4/0x49c) from [<c00b227c>] (kthread+0x80/0x88)
<4>[ 2048.834899] [<c00b227c>] (kthread+0x80/0x88) from [<c0050148>] (kernel_thread_exit+0x0/0x8)
<4>[ 2048.835052] Board Information: Tuna HW revision: 09 (Maguro 8th Sample), cpu OMAP4460 ES1.1
<4>[ 2048.835144] ---[ end trace 33de6ebe35ad56b7 ]---
<6>[ 2048.837768] scsi 1:0:0:0: Device offlined - not ready after error recovery
I found a thread on TI site for the OMAP4460 that discusses an error like mine but the signature is not the same, seems there they were having a problem with the the TCP/IP stack becoming corrupted because the processor was allocating memory too fast. Something like that is happening here. All I really know is it has to do with the handling of the L3 cache.
I think this may have to do with the cpu trying to idle when it should not.
What kind of drive are you using? If its a portable usb hard drive then this could be a power issue.
It's not a portable HD, just usb sd card reader.
With further investigation I have found that the problem might stem from the x-loader being mismatched to the kernel, which is part of the bootloader.
I tried different bootloaders, but none made a difference.
Finally, I tried a different USB OTG cable, a slightly more expensive one, and it worked.
Related
Hey everyone,
I am having a strange problem with my sd-ext (ext4) partition for some time now.
The ROM I am using is ICS for Desire by Sandvold (Amarullz and a2sd), but I don't know whether this is strictly ROM related or not.
I have been getting some mass FCs over and over again, across different versions flashed after full wipes.
Today I found out that the problem is that the sd-ext partition is not properly mounted (read-only), but here is the weird part: it is properly mounted (read-write) using the recovery and is also properly mounted before I unlock the sim-card.
When I unlock the sim-card or otherwise change the connectivity (WLAN, mobile data, airplane mode) it remounts sd-ext as read-only.
I have already tried reformatting and repartioning the sd-card.
Any idea why the system is doing that or how I can prevent that from happening?
Thanks
\Update1:
Here is a part of dmesg, showing the error when I unlock the sim-card after a fresh reboot:
Code:
<6>[ 182.512451] active wake lock PowerManagerService
<6>[ 182.512481] active wake lock vbus_present
<6>[ 182.512481] active wake lock SMD_DS, time left 35
<6>[ 182.512481] [R] early_suspend end
<6>[ 190.756866] batt: 74%, 3884 mV, 290 mA (210 avg), 29.8 C, 1008 mAh
<3>[ 191.665740] mmc1: Data CRC error
<3>[ 191.665954] msmsdcc_data_err: opcode 0x00000019
<3>[ 191.666168] msmsdcc_data_err: blksz 512, blocks 16
<3>[ 191.666595] mmc1: DMA channel flushed (0x80000004)
<3>[ 191.666839] Flush data: 0000c003 3b2d8018 00000000 00400040 00370035 00008003
<6>[ 191.667266] mmc1: Controller has been re-initialiazed
<3>[ 191.672515] mmcblk0: error -84 transferring data, sector 6710376, nr 16, card status 0x900
<3>[ 191.672973] mmc1: Data timeout
<6>[ 191.673217] mmc1: Controller has been re-initialiazed
<3>[ 191.673797] end_request: I/O error, dev mmcblk0, sector 6710376
<3>[ 191.674041] end_request: I/O error, dev mmcblk0, sector 6710384
<3>[ 191.679138] Aborting journal on device mmcblk0p2-8.
<0>[ 191.687255] journal commit I/O error
<2>[ 191.726745] EXT4-fs error (device mmcblk0p2): ext4_journal_start_sb:276: Detected aborted journal
<2>[ 191.727478] EXT4-fs (mmcblk0p2): Remounting filesystem read-only
<3>[ 191.984802] binder: 1268: binder_alloc_buf, no vma
<6>[ 191.985046] binder: 206:339 transaction failed 29201, size 4-0
<6>[ 191.985412] binder: send failed reply for transaction 79996 to 1268:1268
The weird thing is that I have been running the phone without any problem in airplane mode + WLAN for a whole day, until I tried to reactivate mobile connection again and do some tests with it.
It seems that the system only has a problem with the journal when it uses the mobile connection.
\Update2:
Here the dmesg message before I unlock the sim-card. No error message for sd-ext:
Code:
<6>[ 13.084991] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,data=ordered,commit=15,barrier=1,nouser_xattr,errors=continue
4EXT is also unable to find any errors with the sd-ext partition (I have used the recovery to format and partition the sd-card).
\Update3:
Ok I just reformatted and repartitioned the sdcard again using gparted and reflashed the ROM with a full wipe.
I am getting the same error again.
I have had my refurbished HTC Vision for about three weeks and it hadn't had any problems. Then yesterday, I rebooted it and now the sdcard doesn't work. Not just that it doesn't mount, rather there is not even a /dev/block/mmcblk1 device.
Here is what I tried:
* Boot into ClockworkMod, and run adb shell. Still no /dev/block/mmcblk1.
* Boot into fastboot and run "fastboot oem enableqxdm 0" and "fastboot oem eraseconfig".
* Per some random instructions on the net, I held vol-up and power, then pulled the battery after the phone vibrated. Then I held vol-up, vol-down, power and did the same. Then the fastboot commands again.
* Bent the sdcard port's pins out a bit with tweezers.
* SDcard works in computer (Linux).
* Tried another card that has nothing but a vfat partition.
Nothing works! There are some errors in dmesg:
Code:
$ dmesg |grep mmc
<5>[ 0.000000] Kernel command line: board_vision.disable_uart2=0 board_vision.usb_h2w_sw=0 board_vision.disable_sdcard=0 diag.enabled=0 board_vision.debug_uart=0 smisize=0 userdata_sel=0 androidboot.emmc=true androidboot.baseband=26.02.01.15_M2 androidboot.cid=T-MOB010 androidboot.batt_poweron=good_battery androidboot.carrier=TMUS androidboot.mid=PC1010000 androidboot.keycaps=qwerty androidboot.mode=normal androidboot.serialno=HT09LR200858 androidboot.bootloader=0.76.2000 no_console_suspend=1 console=null
<6>[ 2.532989] vision: vision_init_mmc
<3>[ 3.267822] mmc0: No card detect facilities available
<6>[ 3.268341] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 98,0 dma 7
<6>[ 3.268615] mmc0: Platform slot type: MMC
<6>[ 3.268737] mmc0: 4 bit data mode disabled
<6>[ 3.269012] mmc0: 8 bit data mode enabled
<6>[ 3.269134] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
<6>[ 3.269378] mmc0: Slot eject status = 0
<6>[ 3.269531] mmc0: Power save feature enable = 1
<6>[ 3.269653] mmc0: DM non-cached buffer at ffa0c000, dma_addr 0x2b774000
<6>[ 3.269927] mmc0: DM cmd busaddr 0x2b774000, cmdptr busaddr 0x2b774300
<6>[ 3.270751] mmc1: Qualcomm MSM SDCC at 0x00000000a3000000 irq 96,0 dma 8
<6>[ 3.270996] mmc1: Platform slot type: N/A
<6>[ 3.271148] mmc1: 4 bit data mode enabled
<6>[ 3.271392] mmc1: 8 bit data mode disabled
<6>[ 3.271514] mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
<6>[ 3.271789] mmc1: Slot eject status = 1
<6>[ 3.271911] mmc1: Power save feature enable = 1
<6>[ 3.272064] mmc1: DM non-cached buffer at ffa0d000, dma_addr 0x2b777000
<6>[ 3.272308] mmc1: DM cmd busaddr 0x2b777000, cmdptr busaddr 0x2b777300
<6>[ 3.273468] mmc2: Qualcomm MSM SDCC at 0x00000000a3100000 irq 100,0 dma 8
<6>[ 3.273712] mmc2: Platform slot type: SD
<6>[ 3.273834] mmc2: 4 bit data mode enabled
<6>[ 3.273986] mmc2: 8 bit data mode disabled
<6>[ 3.274230] mmc2: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
<6>[ 3.274353] mmc2: Slot eject status = 0
<6>[ 3.274658] mmc2: Power save feature enable = 1
<6>[ 3.274810] mmc2: DM non-cached buffer at ffa0e000, dma_addr 0x2b778000
<6>[ 3.275054] mmc2: DM cmd busaddr 0x2b778000, cmdptr busaddr 0x2b778300
<6>[ 3.275207] mmc2: Polling status mode enabled
<6>[ 3.425598] mmc0: new high speed MMC card at address 0001
<6>[ 3.427093] mmcblk0: mmc0:0001 SEM04G 2.09 GiB
<6>[ 3.428100] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
<6>[ 3.569030] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
<4>[ 3.703063] mmc2: high speed mode max_dtr = 50000000
<4>[ 3.703491] mmc2: host does not support reading read-only switch. assuming write-enable.
<6>[ 3.703643] mmc2: new high speed SDHC card at address 0001
<6>[ 3.704498] mmcblk1: mmc2:0001 00000 7.41 GiB
<6>[ 3.705291] mmcblk1: p1
<4>[ 4.648254] EXT4-fs (mmcblk0p26): warning: maximal mount count reached, running e2fsck is recommended
<7>[ 4.651062] EXT4-fs (mmcblk0p26): ext4_orphan_cleanup: deleting unreferenced inode 24790
<7>[ 4.655670] EXT4-fs (mmcblk0p26): ext4_orphan_cleanup: deleting unreferenced inode 24741
<6>[ 4.657012] EXT4-fs (mmcblk0p26): 2 orphan inodes deleted
<6>[ 4.657379] EXT4-fs (mmcblk0p26): recovery complete
<6>[ 4.703216] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>[ 4.758331] EXT4-fs (mmcblk0p27): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 4.760345] EXT4-fs (mmcblk0p27): recovery complete
<6>[ 4.762298] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: barrier=1
<4>[ 4.886474] EXT4-fs (mmcblk0p28): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 4.888580] EXT4-fs (mmcblk0p28): recovery complete
<6>[ 4.890563] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: barrier=1
<7>[ 20.824981] mmc1: card_present 1
<6>[ 20.825134] mmc1: Slot status change detected (0 -> 1)
<7>[ 23.383300] mmc1: queuing CIS tuple 0x91 length 3
<6>[ 23.383331] mmc1: new high speed SDIO card at address 0001
<3>[ 38.746368] mmc2: Data CRC error
<6>[ 38.746978] mmc2: Controller has been reset
<3>[ 38.747467] mmcblk1: error -84 transferring data, sector 2080, nr 1, card status 0x900
<6>[ 38.747619] mmc2: reinit card
<4>[ 38.747863] mmc2: Starting deferred resume
<3>[ 38.814849] mmc2: Data CRC error
<6>[ 38.815521] mmc2: Controller has been reset
<3>[ 38.815856] mmc2: Re-init card rc = -84 (retries = 5)
<3>[ 38.997650] mmc2: Data CRC error
<6>[ 38.998291] mmc2: Controller has been reset
<3>[ 39.001403] mmc2: Re-init card rc = -84 (retries = 4)
<3>[ 39.200927] mmc2: Data CRC error
<6>[ 39.201507] mmc2: Controller has been reset
<3>[ 39.201721] mmc2: Re-init card rc = -84 (retries = 3)
<3>[ 39.384826] mmc2: Data CRC error
<6>[ 39.385406] mmc2: Controller has been reset
<3>[ 39.385650] mmc2: Re-init card rc = -84 (retries = 2)
<3>[ 39.583618] mmc2: Data CRC error
<6>[ 39.584228] mmc2: Controller has been reset
<3>[ 39.584472] mmc2: Re-init card rc = -84 (retries = 1)
<6>[ 39.666137] mmc2: Deferred resume failed
<6>[ 39.666412] mmc: reinit failed, remove card
<6>[ 39.666625] mmc2: remove card
<3>[ 39.666778] end_request: I/O error, dev mmcblk1, sector 2080
<3>[ 39.667053] Buffer I/O error on device mmcblk1p1, logical block 32
<4>[ 39.667205] lost page write due to I/O error on mmcblk1p1
<3>[ 39.667480] mmc_blk_issue_rq failed!!
<6>[ 39.667633] mmc2: mmc_remove_sd_card
<6>[ 39.667907] mmc2: card 0001 removed
<3>[ 39.670318] mmcblk1: error -123 sending status comand
<3>[ 39.670471] mmcblk1: error -123 sending read/write command, response 0x0, card status 0x0
<3>[ 39.670867] end_request: I/O error, dev mmcblk1, sector 2080
<3>[ 39.671783] mmc_blk_issue_rq failed!!
<3>[ 39.671966] mmcblk1: error -123 sending read command, response 0x0
<4>[ 39.672210] mmcblk1: retrying using single block read
<3>[ 39.672332] mmcblk1: error -123 sending status comand
<3>[ 39.672607] mmcblk1: error -123 sending read/write command, response 0x0, card status 0x0
<3>[ 39.672882] end_request: I/O error, dev mmcblk1, sector 32378
<3>[ 39.673126] end_request: I/O error, dev mmcblk1, sector 32379
<3>[ 39.673278] end_request: I/O error, dev mmcblk1, sector 32380
<3>[ 39.673522] end_request: I/O error, dev mmcblk1, sector 32381
<3>[ 39.673675] end_request: I/O error, dev mmcblk1, sector 32382
<3>[ 39.673919] end_request: I/O error, dev mmcblk1, sector 32383
<3>[ 39.674072] end_request: I/O error, dev mmcblk1, sector 32384
<3>[ 39.674316] end_request: I/O error, dev mmcblk1, sector 32385
<3>[ 39.674499] mmc_blk_issue_rq failed!!
<3>[ 39.674774] mmcblk1: error -123 sending status comand
<3>[ 39.674926] mmcblk1: error -123 sending read/write command, response 0x0, card status 0x0
<3>[ 39.675292] end_request: I/O error, dev mmcblk1, sector 32378
... and so on. In this run, I see that at least briefly the kernel could read the mmcblk1 partition table (although there still was not /dev/block/mmcblk1). However, most of the time it can't and just gives the CRC errors.
Is this a hardware or software problem. Any suggestions? Thanks.
Almost 100% hardware from what you have written, I would suggest disconnecting the ribbion cable, clean it, and put it back. If it still won't work a new sd card tray is about 10$ on ebay and a snap to put it
Sent from my HTC Vision using xda premium
worked!
demkantor said:
Almost 100% hardware from what you have written, I would suggest disconnecting the ribbion cable, clean it, and put it back. If it still won't work a new sd card tray is about 10$ on ebay and a snap to put it
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Worked, thanks!!! The CRC errors made me suspect hardware, but I wanted someone else to say it before I tore the thing open. I've always had bad luck tearing these things apart (only junk phones in the past), but I bought a cheapo disassembly kit a while back which has helped greatly with popping the case off. And thankfully I only had to get to about step three of the instructions before the ribbon cable was accessible!
Hi. I have Nexus 7 2013 WiFi 32Gb. FLO 04.02 bootloader. Stock 4.4.2 android with root and teamwin.
Recently, I start download file and after that my nexus 7 rebooted. And it stuck on Google boot screen. I try to run teamwin, but it also stuck on Teamwin logo.
In fastboot mode i get:
Code:
> sudo fastboot -u format cache
formatting 'cache' partition...
Creating filesystem with parameters:
Size: 587202560
Block size: 4096
Blocks per group: 32768
Inodes per group: 7168
Inode size: 256
Journal blocks: 2240
Label:
Blocks: 143360
Block groups: 5
Reserved block group size: 39
Created filesystem with 11/35840 inodes and 4616/143360 blocks
sending 'cache' (10984 KB)...
writing 'cache'...
FAILED (remote: flash write failure)
finished. total time: 89.945s
> sudo fastboot -w
erasing 'userdata'...
FAILED (remote: failed to erase partition)
finished. total time: 0.015s
> sudo fastboot flash bootloader bootloader-flo-flo-04.02.img
sending 'bootloader' (3911 KB)...
OKAY [ 0.130s]
writing 'bootloader'...
FAILED (remote: flash write failure)
finished. total time: 1.068s
e2fsck:
Code:
e2fsck /dev/block/mmcblk0
e2fsck 1.41.14 (22-Dec-2010)
e2fsck: Device or resource busy while trying to open /dev/block/mmcblk0
Filesystem mounted or opened exclusively by another program?
e2fsck 1.41.14 (22-Dec-2010)
e2fsck: Device or resource busy while trying to open /dev/block/mmcblk0p30
Filesystem mounted or opened exclusively by another program?
mount:
Code:
mount
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,seclabel,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,seclabel,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,seclabel,relatime)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,relatime)
dmesg: pastebin. com/j4hnHkwg
PS. Can't insert links, and can't insert dmesg here, message are too long... =(
Some other logs:
Code:
<4>[ 1013.807952] ------------[ cut here ]------------
<4>[ 1013.807952] WARNING: at drivers/mmc/host/msm_sdcc.c:3538 msmsdcc_disable+0x84/0x10c()
<4>[ 1013.807952] mmc0: msmsdcc_disable: failed with error -22
<4>[ 1013.807983] [<c010cbc8>] (unwind_backtrace+0x0/0x11c) from [<c01730e8>] (warn_slowpath_common+0x48/0x60)
<4>[ 1013.807983] [<c01730e8>] (warn_slowpath_common+0x48/0x60) from [<c0173158>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 1013.807983] [<c0173158>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0659b18>] (msmsdcc_disable+0x84/0x10c)
<4>[ 1013.808013] [<c0659b18>] (msmsdcc_disable+0x84/0x10c) from [<c0646130>] (mmc_release_host+0x4c/0xb0)
<4>[ 1013.808013] [<c0646130>] (mmc_release_host+0x4c/0xb0) from [<c06571a0>] (mmc_blk_issue_rq+0x480/0x4c0)
<4>[ 1013.808044] [<c06571a0>] (mmc_blk_issue_rq+0x480/0x4c0) from [<c0657648>] (mmc_queue_thread+0xd4/0x19c)
<4>[ 1013.808044] [<c0657648>] (mmc_queue_thread+0xd4/0x19c) from [<c018f804>] (kthread+0x84/0x90)
<4>[ 1013.808044] [<c018f804>] (kthread+0x84/0x90) from [<c0107228>] (kernel_thread_exit+0x0/0x8)
<4>[ 1013.808074] ---[ end trace c0d52a61d7a24c7c ]---
<6>[ 1013.808074] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
<6>[ 1013.808074] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
<4>[ 1013.901123] ------------[ cut here ]------------
<4>[ 1013.901245] WARNING: at drivers/mmc/host/msm_sdcc.c:3510 msmsdcc_enable+0x108/0x144()
<4>[ 1013.901306] mmc0: msmsdcc_enable: failed with error -22
<4>[ 1013.901397] [<c010cbc8>] (unwind_backtrace+0x0/0x11c) from [<c01730e8>] (warn_slowpath_common+0x48/0x60)
<4>[ 1013.901519] [<c01730e8>] (warn_slowpath_common+0x48/0x60) from [<c0173158>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 1013.901580] [<c0173158>] (warn_slowpath_fmt+0x2c/0x3c) from [<c065db64>] (msmsdcc_enable+0x108/0x144)
<4>[ 1013.901702] [<c065db64>] (msmsdcc_enable+0x108/0x144) from [<c0646018>] (__mmc_claim_host+0x170/0x180)
<4>[ 1013.901824] [<c0646018>] (__mmc_claim_host+0x170/0x180) from [<c0656d54>] (mmc_blk_issue_rq+0x34/0x4c0)
<4>[ 1013.901916] [<c0656d54>] (mmc_blk_issue_rq+0x34/0x4c0) from [<c0657648>] (mmc_queue_thread+0xd4/0x19c)
<4>[ 1013.902038] [<c0657648>] (mmc_queue_thread+0xd4/0x19c) from [<c018f804>] (kthread+0x84/0x90)
<4>[ 1013.902130] [<c018f804>] (kthread+0x84/0x90) from [<c0107228>] (kernel_thread_exit+0x0/0x8)
<4>[ 1013.902221] ---[ end trace c0d52a61d7a24c7d ]---
<6>[ 1013.902343] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
<6>[ 1013.902404] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
<6>[ 1013.903350] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
<3>[ 1013.908935] mmcblk0: error -110 sending status command, retrying
<3>[ 1013.914428] mmcblk0: error -110 sending status command, retrying
<3>[ 1013.919891] mmcblk0: error -110 sending status command, aborting
<3>[ 1013.919982] end_request: I/O error, dev mmcblk0, sector 4718594
<3>[ 1013.920104] EXT4-fs (mmcblk0p30): unable to read superblock
<4>[ 1013.920104] ------------[ cut here ]------------
<4>[ 1013.920135] WARNING: at drivers/mmc/host/msm_sdcc.c:3538 msmsdcc_disable+0x84/0x10c()
<4>[ 1013.920135] mmc0: msmsdcc_disable: failed with error -22
<4>[ 1013.920135] [<c010cbc8>] (unwind_backtrace+0x0/0x11c) from [<c01730e8>] (warn_slowpath_common+0x48/0x60)
<4>[ 1013.920166] [<c01730e8>] (warn_slowpath_common+0x48/0x60) from [<c0173158>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 1013.920166] [<c0173158>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0659b18>] (msmsdcc_disable+0x84/0x10c)
<4>[ 1013.920166] [<c0659b18>] (msmsdcc_disable+0x84/0x10c) from [<c0646130>] (mmc_release_host+0x4c/0xb0)
<4>[ 1013.920196] [<c0646130>] (mmc_release_host+0x4c/0xb0) from [<c06571a0>] (mmc_blk_issue_rq+0x480/0x4c0)
<4>[ 1013.920196] [<c06571a0>] (mmc_blk_issue_rq+0x480/0x4c0) from [<c0657648>] (mmc_queue_thread+0xd4/0x19c)
<4>[ 1013.920227] [<c0657648>] (mmc_queue_thread+0xd4/0x19c) from [<c018f804>] (kthread+0x84/0x90)
<4>[ 1013.920227] [<c018f804>] (kthread+0x84/0x90) from [<c0107228>] (kernel_thread_exit+0x0/0x8)
<4>[ 1013.920227] ---[ end trace c0d52a61d7a24c7e ]---
<6>[ 1013.920227] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
<6>[ 1013.920257] mmc0: RPM: runtime_status=0, usage_count=0, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
<3>[ 703.888671] EXT4-fs (mmcblk0p30): unable to read superblock
<3>[ 7.323852] mmcblk0: error -110 sending stop command, original cmd response 0x940, card status 0x2400e40
umount: can't umount /dev/block/mmcblk0: Invalid argument
mmc0: msmsdcc_enable: failed with error -22
<3>[ 757.383453] end_request: I/O error, dev mmcblk0, sector 4718592
<6>[ 1364.750000] mmc0: PM: sdcc_suspended=0, pending_resume=0, sdcc_suspending=0
<6>[ 1364.750091] mmc0: RPM: runtime_status=0, usage_count=1, is_suspended=0, disable_depth=0, runtime_error=-110, request_pending=0, request=0
<6>[ 1364.751068] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
<3>[ 1364.756591] mmcblk0: error -110 sending status command, retrying
<3>[ 1364.762145] mmcblk0: error -110 sending status command, retrying
<3>[ 1364.767608] mmcblk0: error -110 sending status command, aborting
<3>[ 1364.767700] end_request: I/O error, dev mmcblk0, sector 4718592
<3>[ 1364.767791] end_request: I/O error, dev mmcblk0, sector 4718593
<3>[ 1364.767852] end_request: I/O error, dev mmcblk0, sector 4718594
<3>[ 1364.767974] end_request: I/O error, dev mmcblk0, sector 4718595
<3>[ 1364.768035] end_request: I/O error, dev mmcblk0, sector 4718596
<3>[ 1364.768127] end_request: I/O error, dev mmcblk0, sector 4718597
<3>[ 1364.768218] end_request: I/O error, dev mmcblk0, sector 4718598
<3>[ 1364.768310] end_request: I/O error, dev mmcblk0, sector 4718599
I have exactly the same problem. I wasn't doing anything - I just lifted the cover the other morning to find it sitting at the Google logo. Can it really be hosed? Are we SOL for warranty repair?
eecummings said:
I have exactly the same problem. I wasn't doing anything - I just lifted the cover the other morning to find it sitting at the Google logo. Can it really be hosed? Are we SOL for warranty repair?
Click to expand...
Click to collapse
Have you guys test the nexus root tool kit?
it's a wonderful piece of software..
it does helped alot my nexus 4 when it's half bricked...
Try flashing system images and see what happens?
Sent from my XT1032 using XDA Premium 4 mobile app
Hi, I've the exact same problem too.
Did you manage to solve it or did you have to send it back for repair?
Thanks,
Alessandro
I believe this is the same problem I have: Not being able to format my corrupted cache partition.
Since my tablet was not unlocked or rooted I can't seem to flash a ROM either, even stock.
1c3_5n0w said:
Try flashing system images and see what happens?
Click to expand...
Click to collapse
I can't flash or erase or format any partition. I get the same error after some period of timeout.
Hello.
So - I bought this phone about ~8/9 months ago (in april 2014). I installed Cyanogenmod 11 by Maclaw twice, but there were problems with stability, so in August I decided to install AOSP by salvo (slv96).
Since then, everything was okay, until the middle of January (this year), when the phone... just restarted. It did not surprise me, because it restarted couple of times before. Unfortunately, it happend again - twice - so I started looking for possible causes. I noticed that the phone can boot normally, I can even use it for some time, but when I want to change something on it, it restarts, probably getting a kernel panic.
I tried to delete all data, or "triple wipe", but after that phone still had untouched ROM, just like it was before. Nothing was removed. So I downloaded Samsung Kies, because I tried to install an "original ROM", but Kies only shows the message "Connecting" and nothing more happens.
Next time I tried the ADB, I reset the flash counter by command:
Code:
dd if=/dev/zero of=/dev/block/mmcblk0 bs=1 count=1 seek=3145732
then I checked "what happens when I write the command dmesg | grep mmc*", which results in something like this:
Code:
[email protected]:/ # dmesg | grep mmc*
dmesg | grep mmc*
<7>[ 0.000000] Normal zone: 1248 pages used for memmap
<7>[ 0.000000] HighMem zone: 286 pages used for memmap
<5>[ 0.000000] Kernel command line: cachepolicy=writealloc mpcore_wdt.mpcore_margin=359 root=/dev/ram0 rw rootwait crash_reboot=yes crash_dump=no init=initconsole='null' [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] vmalloc=264M jig_smd=0 lpm_boot=0 checksum_pass=1 checksum_done=1 sec_debug.enable=0 sec_debug.enable_user=0 androidboot.serialno=473700e240071108 board_id=12 startup_graphics=1 logo. lcdtype=8 sbl_copy=1
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.322540] print_constraints: dummy:
<6>[ 0.343658] print_constraints: db8500-sva-mmdsp:
<7>[ 0.343688] regulator regulator.9: regulator-db8500-sva-mmdsp-probed
<6>[ 0.343872] print_constraints: db8500-sva-mmdsp-ret:
<7>[ 0.343902] regulator regulator.10: regulator-db8500-sva-mmdsp-ret-probed
<6>[ 0.344329] print_constraints: db8500-sia-mmdsp:
<7>[ 0.344360] regulator regulator.12: regulator-db8500-sia-mmdsp-probed
<6>[ 0.344543] print_constraints: db8500-sia-mmdsp-ret:
<7>[ 0.344604] regulator regulator.13: regulator-db8500-sia-mmdsp-ret-probed
<6>[ 0.772735] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 1.227233] bt404_ts_device 3-0020: send reset command
<6>[ 1.255004] mmci-pl18x sdi2: mmc0: PL180 manf 80 rev4 at 0x80005000 irq 73,-1 (pio)
<6>[ 1.255096] mmci-pl18x sdi2: DMA channels RX dma0chan16, TX dma0chan17
<4>[ 1.298492] mmci-pl18x sdi0: Provided ocr_mask/setpower will not be used (using regulator instead)
<3>[ 1.298645] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
<6>[ 1.298950] mmci-pl18x sdi0: mmc1: PL180 manf 80 rev4 at 0x80126000 irq 92,-1 (pio)
<3>[ 1.298980] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
<6>[ 1.299072] mmci-pl18x sdi0: DMA channels RX dma0chan18, TX dma0chan19
<3>[ 1.322021] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 8
<3>[ 1.322357] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
<3>[ 1.322662] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
<3>[ 1.322967] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
<3>[ 1.323303] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
<3>[ 1.323608] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
<3>[ 1.323913] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
<3>[ 1.324249] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
<3>[ 1.324554] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
<6>[ 1.368377] mmci-pl18x sdi1: mmc2: PL180 manf 80 rev4 at 0x80118000 irq 82,-1 (pio)
<6>[ 1.368438] mmci-pl18x sdi1: DMA channels RX dma0chan20, TX dma0chan21
<6>[ 1.471282] mmc0: new high speed DDR MMC card at address 0001
<6>[ 1.471771] mmcblk0: mmc0:0001 SEM04G 3.68 GiB
<6>[ 1.471954] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB
<6>[ 1.472137] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB
<6>[ 1.477600] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
<6>[ 1.484130] mmcblk0boot1: unknown partition table
<6>[ 1.487213] mmcblk0boot0: unknown partition table
<3>[ 1.487823] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
<3>[ 1.488159] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
<3>[ 1.511444] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
<3>[ 1.511779] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
<3>[ 1.512084] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
<3>[ 1.512390] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
<4>[ 1.548614] [<c0d7bb08>] (dump_stack+0x20/0x24) from [<c073f974>] (warn_slowpath_common+0x64/0x74)
<4>[ 1.548614] [<c073f974>] (warn_slowpath_common+0x64/0x74) from [<c073f9c4>] (warn_slowpath_fmt+0x40/0x48)
<6>[ 1.588836] mmio_probe
<6>[ 1.589508] mmio_camera mmio_camera: MMIO driver initialized with minor=42
<6>[ 1.589538] mmio_camera mmio_camera: system_rev 7, NCP6914 Camera Sub-PMIC
<7>[ 1.595886] mmio_cam_power_pin_control pin : 2 , state 1
<7>[ 1.596466] mmio_cam_power_pin_control pin : 2 , state 0
<4>[ 1.624908] [<c0d7bb08>] (dump_stack+0x20/0x24) from [<c073f974>] (warn_slowpath_common+0x64/0x74)
<4>[ 1.624908] [<c073f974>] (warn_slowpath_common+0x64/0x74) from [<c073f9c4>] (warn_slowpath_fmt+0x40/0x48)
<6>[ 1.636779] asoc: snd-soc-dummy-dai <-> ux500-msp-i2s.0 mapping ok
<4>[ 1.668792] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 1.700103] mmc1: new high speed SDHC card at address 0007
<6>[ 1.700683] mmcblk1: mmc1:0007 SD8GB 7.21 GiB
<6>[ 1.702301] mmcblk1: p1
<6>[ 2.112426] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=panic
<6>[ 2.246673] EXT4-fs (mmcblk0p2): recovery complete
<6>[ 2.247863] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<6>[ 2.299285] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p2
<6>[ 2.491821] e2fsck: /dev/block/mmcblk0p2: recovering journal
<6>[ 2.491882] e2fsck: /system/bin/e2fsck: unable to set superblock flags on/dev/block/mmcblk0p2
<6>[ 2.581146] EXT4-fs (mmcblk0p2): recovery complete
<6>[ 2.583099] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic
<6>[ 2.625762] EXT4-fs (mmcblk0p4): recovery complete
<6>[ 2.626617] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<6>[ 2.669433] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p4
<6>[ 2.741790] e2fsck: /dev/block/mmcblk0p4: recovering journal
<6>[ 2.741851] e2fsck: /system/bin/e2fsck: unable to set superblock flags on/dev/block/mmcblk0p4
<6>[ 2.781799] EXT4-fs (mmcblk0p4): recovery complete
<6>[ 2.782684] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic
<6>[ 2.803741] EXT4-fs (mmcblk0p7): recovery complete
<6>[ 2.804870] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<6>[ 2.849517] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p7
<6>[ 2.897705] e2fsck: /dev/block/mmcblk0p7: recovering journal
<6>[ 2.897766] e2fsck: /system/bin/e2fsck: unable to set superblock flags on /dev/block/mmcblk0p7
<6>[ 2.912231] EXT4-fs (mmcblk0p7): recovery complete
<6>[ 2.913024] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic
<6>[ 2.920623] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: errors=panic
<7>[ 3.355377] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 41301
<7>[ 3.362243] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 40447
<7>[ 3.367767] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 64030
<7>[ 3.367858] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 64025
<7>[ 3.370513] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 56153
<7>[ 3.374267] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 8012
<6>[ 3.374481] EXT4-fs (mmcblk0p5): 6 orphan inodes deleted
<6>[ 3.374511] EXT4-fs (mmcblk0p5): recovery complete
<6>[ 3.398315] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<6>[ 3.449951] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p5
<6>[ 3.850677] e2fsck: /dev/block/mmcblk0p5: recovering journal
<6>[ 3.850738] e2fsck: /system/bin/e2fsck: unable to set superblock flags on /dev/block/mmcblk0p5
<7>[ 4.324157] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 41301
<7>[ 4.331481] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 40447
<7>[ 4.337310] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 64030
<7>[ 4.337463] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 64025
<7>[ 4.340911] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 56153
<7>[ 4.344512] EXT4-fs (mmcblk0p5): ext4_orphan_cleanup: deleting unreferenced inode 8012
<6>[ 4.344940] EXT4-fs (mmcblk0p5): 6 orphan inodes deleted
<6>[ 4.344970] EXT4-fs (mmcblk0p5): recovery complete
<6>[ 4.365631] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,journal_async_commit,errors=panic
<3>[ 6.199615] u8500_shrm shrm_bus: common receive with l2 header 210 failed
<4>[ 6.279571] [<c0d7bb08>] (dump_stack+0x20/0x24) from [<c073f974>] (warn_slowpath_common+0x64/0x74)
<4>[ 6.279602] [<c073f974>] (warn_slowpath_common+0x64/0x74) from [<c073fa40>] (warn_slowpath_null+0x2c/0x34)
<3>[ 21.941711] end_request: I/O error, dev mmcblk0, sector 3078528
<3>[ 32.071746] end_request: I/O error, dev mmcblk0, sector 3321888
<3>[ 32.073638] end_request: I/O error, dev mmcblk0, sector 3322784
<3>[ 34.127593] end_request: I/O error, dev mmcblk0, sector 2155520
<3>[ 34.253173] end_request: I/O error, dev mmcblk0, sector 3083136
<3>[ 34.792480] end_request: I/O error, dev mmcblk0, sector 1544704
<3>[ 35.217437] end_request: I/O error, dev mmcblk0, sector 3074040
<3>[ 35.709747] mmc2: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
<3>[ 35.710083] mmc2: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
<3>[ 35.734436] mmc2: [MMC] CMD TIMEOUT STATUS: 4, CMD: 8
<6>[ 35.811065] mmc2: new high speed SDIO card at address 0001
<3>[ 36.042938] end_request: I/O error, dev mmcblk0, sector 3071560
<4>[ 36.340393] sdio_reset_comm():
<4>[ 38.452423] Unknown PRIVATE command WLS_BATCHING GET - ignored
<4>[ 38.453887] Unknown PRIVATE command WLS_BATCHING STOP - ignored
<3>[ 44.364715] end_request: I/O error, dev mmcblk0, sector 3689008
<3>[ 44.548583] end_request: I/O error, dev mmcblk0, sector 3724064
<3>[ 62.210357] end_request: I/O error, dev mmcblk0, sector 3716120
<3>[ 62.472076] end_request: I/O error, dev mmcblk0, sector 3690320
<3>[ 62.775665] end_request: I/O error, dev mmcblk0, sector 3716184
<3>[ 75.980651] end_request: I/O error, dev mmcblk0, sector 3724512
<3>[ 82.332397] end_request: I/O error, dev mmcblk0, sector 2794080
<3>[ 84.947631] end_request: I/O error, dev mmcblk0, sector 3876768
<3>[ 84.949829] end_request: I/O error, dev mmcblk0, sector 3875328
<3>[ 84.959594] end_request: I/O error, dev mmcblk0, sector 3869184
<3>[ 84.960906] end_request: I/O error, dev mmcblk0, sector 3866992
<3>[ 84.962799] end_request: I/O error, dev mmcblk0, sector 3871616
<3>[ 84.965332] end_request: I/O error, dev mmcblk0, sector 3866848
<3>[ 84.967163] end_request: I/O error, dev mmcblk0, sector 3866944
<3>[ 84.969177] end_request: I/O error, dev mmcblk0, sector 3870088
<3>[ 84.971954] end_request: I/O error, dev mmcblk0, sector 3878192
<3>[ 84.973846] end_request: I/O error, dev mmcblk0, sector 3877888
<3>[ 84.991668] end_request: I/O error, dev mmcblk0, sector 3867520
<3>[ 84.993743] end_request: I/O error, dev mmcblk0, sector 3871424
<3>[ 84.998046] end_request: I/O error, dev mmcblk0, sector 3886120
<3>[ 85.004394] end_request: I/O error, dev mmcblk0, sector 3866016
<3>[ 100.235717] end_request: I/O error, dev mmcblk0, sector 3716664
<3>[ 100.686798] end_request: I/O error, dev mmcblk0, sector 3716728
<3>[ 107.611114] end_request: I/O error, dev mmcblk0, sector 3723728
<3>[ 116.956024] end_request: I/O error, dev mmcblk0, sector 3725024
<3>[ 117.235870] end_request: I/O error, dev mmcblk0, sector 3716960
<3>[ 117.372741] end_request: I/O error, dev mmcblk0, sector 3725088
<3>[ 123.722656] end_request: I/O error, dev mmcblk0, sector 3717024
<3>[ 123.910125] end_request: I/O error, dev mmcblk0, sector 3079640
<3>[ 128.908752] end_request: I/O error, dev mmcblk0, sector 3079712
<3>[ 129.095489] end_request: I/O error, dev mmcblk0, sector 3079776
<3>[ 129.182556] end_request: I/O error, dev mmcblk0, sector 3079840
<3>[ 129.626342] end_request: I/O error, dev mmcblk0, sector 1546240
<3>[ 132.953887] end_request: I/O error, dev mmcblk0, sector 3725248
<3>[ 132.995880] end_request: I/O error, dev mmcblk0, sector 3079680
<3>[ 133.043151] end_request: I/O error, dev mmcblk0, sector 3079744
<3>[ 133.115478] end_request: I/O error, dev mmcblk0, sector 3079808
<3>[ 146.493164] end_request: I/O error, dev mmcblk0, sector 3079976
<3>[ 156.772979] end_request: I/O error, dev mmcblk0, sector 3085152
<3>[ 189.913391] end_request: I/O error, dev mmcblk0, sector 2504704
<3>[ 223.977478] end_request: I/O error, dev mmcblk0, sector 2798968
<3>[ 455.043640] end_request: I/O error, dev mmcblk0, sector 3410928
<3>[ 455.045532] end_request: I/O error, dev mmcblk0, sector 3417352
<3>[ 455.047393] end_request: I/O error, dev mmcblk0, sector 3451248
<3>[ 455.049499] end_request: I/O error, dev mmcblk0, sector 3362560
<3>[ 455.051147] end_request: I/O error, dev mmcblk0, sector 3343104
<3>[ 455.053039] end_request: I/O error, dev mmcblk0, sector 3481160
<3>[ 455.055145] end_request: I/O error, dev mmcblk0, sector 3341440
<4>[ 1770.800903] Unknown PRIVATE command WLS_BATCHING GET - ignored
<4>[ 1770.802154] Unknown PRIVATE command WLS_BATCHING STOP - ignored
<3>[ 1806.052703] end_request: I/O error, dev mmcblk0, sector 3716824
[email protected]:/ # dmesg | grep mmc* > wat.txt
dmesg | grep mmc* > wat.txt
sh: can't create wat.txt: Read-only file system
write: Broken pipe
I even tried to clear the internal flash memory from Linux Ubuntu by unmounting internal memory card in CWM Recovery and mounting it as Linux drive, but when I excecuted
Code:
dd if=/dev/zero of/dev/sdb1
and waited for ~2 hours, unmounted drive in Linux and mounted it back in Recovery, nothing happend. It still shows than at sdcard is AOSP.
What I can do with this phone? I have no warranty anymore, because the original system worked very poorly and even if I wanted to - I can't install it, because Samsung Kies does not recognise the phone. Is there any step-by-step tutorial about wiping contents of internal memory card and installing Android on sd card?
Did you try odin?
Yes, I tried ~week ago 4 times. Twice with version 3.10 and twice with Odin 3 v1.85. Installing stock ROM has not helped, I still have AOSP.
But how? There was an error in odin ot what?
Sent from my C1905 using XDA Free mobile app
There was no error, Odin just "stated" that everything was installed correctly, but when I reboot the phone, it still got unchanged AOSP ROM.
Hi All,
Anybody could help me coz got a bit of problem here.
Rom: stock GB 2.3.5 I8150XXKI8
It seems that everything is read-only except the external SD. After reboot, revert back to previous state.
Unable to go to recovery mode.
Done many success flashing in download mode ( flash stock,recovery) though and nothing. it just revert back to the previous state
Reformat usb storage also does not work.
Alot of apps force close.
Long pause at the samsung w logo.
mmcblk0p17 and mmcblk0p27 seems to have an error from below dmesg output.
Needs to confirm with anyone.
Thanks.
<3>[ 3.161895] init: MOUNT NAME /dev/block/mmcblk0p15
<3>[ 3.161925] init: SEC_DEVENC ***[/dev/block/mmcblk0p15][0]
<6>[ 3.181334] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1
<3>[ 3.181395] init: MOUNT NAME /dev/block/mmcblk0p12
<3>[ 3.181426] init: SEC_DEVENC ***[/dev/block/mmcblk0p12][0]
<6>[ 3.186003] EXT4-fs (mmcblk0p12): barriers disabled
<6>[ 3.202056] EXT4-fs (mmcblk0p12): recovery complete
<6>[ 3.202697] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=0
<3>[ 3.202758] init: MOUNT NAME /dev/block/mmcblk0p16
<3>[ 3.202758] init: SEC_DEVENC ***[/dev/block/mmcblk0p16][0]
<6>[ 3.205413] EXT4-fs (mmcblk0p16): barriers disabled
<3>[ 3.215056] init: [boot time] finish coldboot
<6>[ 3.216735] EXT4-fs (mmcblk0p16): recovery complete
<6>[ 3.217314] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=0
<4>[ 3.220519] EXT4-fs (mmcblk0p27): warning: mounting unchecked fs, running e2fsck is recommended
<6>[ 3.221129] EXT4-fs (mmcblk0p27): mounted filesystem without journal. Opts: (null)
<4>[ 3.238127] EXT4-fs (mmcblk0p27): warning: mounting unchecked fs, running e2fsck is recommended
<6>[ 3.238738] EXT4-fs (mmcblk0p27): mounted filesystem without journal. Opts: (null)
<4>[ 3.248168] EXT4-fs (mmcblk0p27): warning: mounting unchecked fs, running e2fsck is recommended
<6>[ 3.249205] EXT4-fs (mmcblk0p27): mounted filesystem without journal. Opts: (null)
<4>[ 3.258544] EXT4-fs (mmcblk0p27): warning: mounting unchecked fs, running e2fsck is recommended
<6>[ 3.259154] EXT4-fs (mmcblk0p27): mounted filesystem without journal. Opts: (null)
<4>[ 3.271483] mmc2: host does not support reading read-only switch. assuming write-enable.
<6>[ 3.271514] mmc2: new high speed SDHC card at address 1234
<6>[ 3.271605] sdio_al mmc2:1234: Probing..
<6>[ 3.271605] sdio_al mmc2:1234: Not an SDIO card
<6>[ 3.271941] mmcblk1: mmc2:1234 SA16G 14.6 GiB
<6>[ 3.272124] mmcblk1: p1
<4>[ 3.276579] EXT4-fs (mmcblk0p27): warning: mounting unchecked fs, running e2fsck is recommended
<6>[ 3.277220] EXT4-fs (mmcblk0p27): mounted filesystem without journal. Opts: (null)
<3>[ 3.278319] init: [disk_config] :::: /dev/block/mmcblk0p27 (ext4)(opt (null)):::::
<3>[ 3.278349] init: internal_storage : ext_identify open
<3>[ 3.278380] init: internal_storage : ext_identify lseek
<3>[ 3.279234] init: internal_storage : ext_identify open
<3>[ 3.279265] init: internal_storage : ext_identify lseek
<3>[ 3.279295] init: MOUNT NAME /dev/block/mmcblk0p27
<3>[ 3.279326] init: SEC_DEVENC ***[/dev/block/mmcblk0p27][0]
<3>[ 3.279357] init: failed that mount s:'/dev/block/mmcblk0p27', t:'/efs', f:ext4 ,op null) (Device or resource busy)
<3>[ 3.279418] init: [disk_config] :::: /dev/block/mmcblk0p17 (ext4)(opt (null)):::::
<3>[ 3.279448] init: internal_storage : ext_identify open
<3>[ 3.279479] init: internal_storage : ext_identify lseek
<3>[ 3.280852] init: internal_storage : ext_identify open
<3>[ 3.280882] init: internal_storage : ext_identify lseek
<3>[ 3.282439] init: [disk_config] :::: fsck -> /dev/block/mmcblk0p17 (ext4):::::
<3>[ 3.282836] init: [disk_config] DEVENC : not mormal [0]
<3>[ 3.282836] init: [disk_config] DEVENC : fs_check with original dev_path
<3>[ 3.644621] mmc1 data status (0x8)
<3>[ 3.644652] mmc1: Data timeout opcode = 0x12
<3>[ 3.644682] mmc1: DMA channel flushed (0x80000004)
<3>[ 3.644682] Flush data: 0000c003 4f713000 00000000 00200040 00290028 00002003
<4>[ 3.645018] mmcblk0: retrying using single block read
<3>[ 4.017912] init: SEC_DEVENC check crypt status
<3>[ 4.017973] init: MOUNT NAME /dev/block/mmcblk0p17
<3>[ 4.017973] init: SEC_DEVENC ***[/dev/block/mmcblk0p17][1]
<3>[ 4.017973] init: SEC_DEVENC checkCrypt main
<3>[ 4.316953] mmc1 data status (0x8)
<3>[ 4.316953] mmc1: Data timeout opcode = 0x12
<3>[ 4.316984] mmc1: DMA channel flushed (0x80000004)
<3>[ 4.316984] Flush data: 0000c003 4f713000 00000000 00200040 05b905b8 00002003
<4>[ 4.317320] mmcblk0: retrying using single block read
<3>[ 4.519804] mmc1 data status (0x8)
<3>[ 4.519834] mmc1: Data timeout opcode = 0x12
<3>[ 4.519865] mmc1: DMA channel flushed (0x80000004)
<3>[ 4.519865] Flush data: 0000c003 4f713000 00000000 00200040 05b905b8 00002003
<4>[ 4.520170] mmcblk0: retrying using single block read
<3>[ 4.727903] mmc1 data status (0x8)
<3>[ 4.727903] mmc1: Data timeout opcode = 0x12
<3>[ 4.727934] mmc1: DMA channel flushed (0x80000004)
<3>[ 4.727934] Flush data: 0000c003 4f713000 00000000 00200040 04690468 00002003
<4>[ 4.728300] mmcblk0: retrying using single block read
<3>[ 5.135984] mmc1 data status (0x8)
<3>[ 5.136015] mmc1: Data timeout opcode = 0x12
<3>[ 5.136045] mmc1: DMA channel flushed (0x80000004)
<3>[ 5.136045] Flush data: 0000c003 4f713000 00000000 00200040 00b900b8 00002003
<4>[ 5.136381] mmcblk0: retrying using single block read
<4>[ 5.233640] EXT4-fs (mmcblk0p17): warning: mounting fs with errors, running e2fsck is recommended
<6>[ 5.234983] EXT4-fs (mmcblk0p17): recovery complete
<6>[ 5.235959] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: errors=continue
<3>[ 5.236020] init: SEC_DEVENC uncrypted parition mounted
<4>[ 5.237577] param_init !
<3>[ 5.237729] init: [boot time] processing action 0x3b6d8 (post-fs)
<3>[ 5.237760] init: [disk_config] :::: /dev/block/mmcblk0p28 (vfat)(opt (null)):::::
<3>[ 5.240323] init: oem_name (android )
<3>[ 5.244382] init: oem_name (android )
<3>[ 5.244474] init: [disk_config] :::: fsck -> /dev/block/mmcblk0p28 (vfat):::::
<3>[ 5.244901] init: [disk_config] DEVENC : not mormal [0]
<3>[ 5.244932] init: [disk_config] DEVENC : fs_check with original dev_path
<3>[ 5.599302] mmc1 data status (0x8)
<3>[ 5.599302] mmc1: Data timeout opcode = 0x12
<3>[ 5.599332] mmc1: DMA channel flushed (0x80000004)
<3>[ 5.599332] Flush data: 0000c003 4f713000 00000000 00200040 02690268 00002003
<4>[ 5.599698] mmcblk0: retrying using single block read
<3>[ 6.010587] mmc1 data status (0x8)
<3>[ 6.010587] mmc1: Data timeout opcode = 0x12
<3>[ 6.010617] mmc1: DMA channel flushed (0x80000004)
<3>[ 6.010617] Flush data: 0000c003 4f713000 00000000 00200040 02790278 00002003
<4>[ 6.010984] mmcblk0: retrying using single block read
<3>[ 6.435544] mmc1 data status (0x8)
<3>[ 6.435544] mmc1: Data timeout opcode = 0x12
<3>[ 6.435574] mmc1: DMA channel flushed (0x80000004)
<3>[ 6.435574] Flush data: 0000c003 4f713000 00000000 00200040 01b901b8 00002003
<4>[ 6.435910] mmcblk0: retrying using single block read
<3>[ 6.638852] mmc1 data status (0x8)
<3>[ 6.638883] mmc1: Data timeout opcode = 0x12
<3>[ 6.638883] mmc1: DMA channel flushed (0x80000004)
<3>[ 6.638913] Flush data: 0000c003 4f713000 00000000 00200040 00b900b8 00002003
<4>[ 6.639249] mmcblk0: retrying using single block read
my internal memory was damaged. I flashed stock rom, entered it's recovery and formatted the internal memory. then installed cwm and installed custom rom. now everything is perfect.
ozgurakman said:
my internal memory was damaged. I flashed stock rom, entered it's recovery and formatted the internal memory. then installed cwm and installed custom rom. now everything is perfect.
Click to expand...
Click to collapse
Hi,
Thanks for the reply and good for you ozgurakman coz able to go to recovery mode. But I'm unable to go to recovery mode to repair the system though. Press the 3 recovery buttons. and just a screen flicker. It seem that my recovery corrupt also. Even after I reflash the recovery block only, still nada.
It seem that I'm running out options though. Anybody?
Did you tried to install cwm?
ozgurakman said:
Did you tried to install cwm?
Click to expand...
Click to collapse
yup also trying that one. also using the dd command in case the odin not working.
If dd command works, everything is fine. if dd command not working +Odin is not working, flashing via jtag is the only way.
ozgurakman said:
If dd command works, everything is fine. if dd command not working +Odin is not working, flashing via jtag is the only way.
Click to expand...
Click to collapse
the weird is that both dd and odin works. Also when i try to reboot it shutdown instead.
Will try to find shop that can do jtag. thanks
zaffrullah said:
the weird is that both dd and odin works. Also when i try to reboot it shutdown instead.
Will try to find shop that can do jtag. thanks
Click to expand...
Click to collapse
If I helped you, please press to thanks button
Last advise: try to different Odin version, different ops, different Rom.
Select to wipe everything.