Ok, so I've been flashing Roms since I first had the G1 but my step sons Galaxy S II is giving me fits as of late.
I've been working on it for over 2 days now and can not figure the problem even after reading through all the how to's and individual rom threads. I initialy rooted his phone back in April/May and had a early ICS phandroid rom on it. However I wanted to move him to JB. I've done the customary wipe data/cache but no matter what JB rom I flash it goes into what I believe is a bootloop. I've read several places it been said to let sit after flashing for 10 minutes so I let sit for 20 and it was still on boot (but no obvious point where you can tell it's looping).
When I went to restore his backup that would no longer boot at all, just a blank screen. So long story short I restored everything to stock then updated to ICS through keis. and tried the process again thinking it might need updated firmware/radio. Same thing happened and I had to restore stock and update through keis again. I am now at a complete loss as I update my phone (One S) and wifes (GSIII) atleast once a week on nightlies.
The one thing that I thought was odd is both on the original 2.3.6 and now 4.0.4 when I go into settings at search for update i get a message saying "no firmware". Not sure if that means anything but it didn't sound right to me.
Any help or suggestions would be overwhelmingly appreciated.
You will get different methods on here but for starters what recovery are you running. Thats problem 1 I guarantee for your bootloop. I use TWRP 2.3 which can be found by downloading goo.im and flashing it from the menu screen. You can also go to the forum here in development for the zip file.
When using TWRP or any touch recovery do not use the wipe scripts. Lets start there.... Since the method to flashing is basically the same all over its just the wiping procedure with the wrong recovery can be tricky
I'm using CWM 6.0.3 I believe he's at school so I don't have the phone to know the exact CWM version. It's also not the touch version. How should I go about wiping data/cache for his phone then? I've never used TWRP but going to assume if you've used one recovery it's pretty similar or self explanatory.
jhenson496 said:
I'm using CWM 6.0.3 I believe he's at school so I don't have the phone to know the exact CWM version. It's also not the touch version. How should I go about wiping data/cache for his phone then? I've never used TWRP but going to assume if you've used one recovery it's pretty similar or self explanatory.
Click to expand...
Click to collapse
I personally prefer that recovery and I'm running a cm 10 on my phone with no issues at never had anything. Yes it's rather simple to put on an even if you want to try the CWM touch recovery by all means go ahead
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Ok, I'll give TWRP a try when he gets home. I guess my next question would be is there a different way of wiping then with other phones?
Do I need the recovery to be touch (never heard of a recovery needing touch version)
Anything different then wiping dalvik, cashe and data? Also I've look around and do not see an actual JB radio. So I'm assuming the ULVH1 radio would work for ICS & JB.
I appreciate your help with this btw.
jhenson496 said:
Ok, I'll give TWRP a try when he gets home. I guess my next question would be is there a different way of wiping then with other phones?
Do I need the recovery to be touch (never heard of a recovery needing touch version)
Anything different then wiping dalvik, cashe and data? Also I've look around and do not see an actual JB radio. So I'm assuming the ULVH1 radio would work for ICS & JB.
I appreciate your help with this btw.
Click to expand...
Click to collapse
CHANGELOG for 2.3.0.0:
-Rebased onto AOSP Jelly Bean source code
-Rewrote backup, restore, wipe, and mount code in C++ classes for easier maintenance going forward
NOTE: backups from prior versions of TWRP are still compatible with 2.3
-ADB sideload functionality from AOSP is included in 2.3, see this link for more info
-Re-wrote fix permissions entirely in C++ and runs in a few seconds instead of a few minutes (thanks to bigbiff)
-Improvements to zip finding in OpenRecoveryScript (should be a lot fewer GooManager automation issues)
-Faster boot times
-Added charging indicator while in recovery (only updates once every 60 seconds)
While this update may not bring a host of new must-have features, this update is a significant re-write of much of the core TWRP code. AOSP Jelly Bean recovery source moved to mostly C++ code and now all of the "TWRP" code is fully rewritten into C++ as well. Now that we've laid this groundwork, we're in a much better position to pull in future AOSP recovery updates as well as implementing more great new features.
Since TWRP 2.3 is based on AOSP jelly bean sources, TWRP now uses recovery API 3 instead of 2. Some zips may no longer work if the developer is using an out-of-date update-binary. This API change should not be a problem on newer devices, but older devices will probably encounter several zips that need to be updated. If needed, you can try using this update-binary that was compiled with current sources. It goes in your zip file in the META-INF/com/google/android folder.
Click to expand...
Click to collapse
There is a lil something from the TWRP thread about the new recovery... basically its built off a JB which improves the features being used like wipes, fix permissions, backups etc. Its not that its solely touch but it was the direction most if not all recoveries have gone to basically preserve that power button and vol keys of our phones. It kinda makes sense...
So with updated technology just came a better way to use a recovery and since the SGII originally had wiping issues TWRP on this phone is made solely for this phone which cut out alot of issues. Now if you prefer a non touch may I suggest 5.0.2.7 w/darkside cache wipes and you would be ok as well. Honestly though I dont think anyone would be upset with TWRP its quite nice
TWRP Link - http://forum.xda-developers.com/showthread.php?t=1768742
Darkside Wipes - http://forum.xda-developers.com/showthread.php?t=1477955 (Only use with CWM 5.0.2.7)
CWM Touch(Latest) - http://forum.xda-developers.com/showthread.php?t=1844637
I would switch to Clockwork Recovery 5.0.2.7 which you can find in ROMmanager app. Thus, you can use TDJ's Darkside super wipe and cache wipe scripts which install very clean.
Finding his scripts might be a bit of a challenge but they are out there. I have them but not sure how i can get them to you... my dropbox isnt working.
if you do find those scripts, then the flash is simple...
reboot into recovery
Flash TDJ's Darkside SUPERWIPE
Flash your ROM or Gapps depending on what that OP says goes first
Flash Darkside CACHE wipe
Reboot, let is settle 10 mins reboot
That works with 5.0.2.7 where you have to mash the side buttons.. Ive installed a few JB and ICS roms this way, worked well for me.
Hit thanks if i helped
abesgs2 said:
I would switch to Clockwork Recovery 5.0.2.7 which you can find in ROMmanager app. Thus, you can use TDJ's Darkside super wipe and cache wipe scripts which install very clean.
Finding his scripts might be a bit of a challenge but they are out there. I have them but not sure how i can get them to you... my dropbox isnt working.
if you do find those scripts, then the flash is simple...
reboot into recovery
Flash TDJ's Darkside SUPERWIPE
Flash your ROM or Gapps depending on what that OP says goes first
Flash Darkside CACHE wipe
Reboot, let is settle 10 mins reboot
That works with 5.0.2.7 where you have to mash the side buttons.. Ive installed a few JB and ICS roms this way, worked well for me.
Hit thanks if i helped
Click to expand...
Click to collapse
My friend I linked the zips in the post right above yours
playya said:
CHANGELOG for 2.3.0.0:
There is a lil something from the TWRP thread about the new recovery... basically its built off a JB which improves the features being used like wipes, fix permissions, backups etc. Its not that its solely touch but it was the direction most if not all recoveries have gone to basically preserve that power button and vol keys of our phones. It kinda makes sense...
So with updated technology just came a better way to use a recovery and since the SGII originally had wiping issues TWRP on this phone is made solely for this phone which cut out alot of issues. Now if you prefer a non touch may I suggest 5.0.2.7 w/darkside cache wipes and you would be ok as well. Honestly though I dont think anyone would be upset with TWRP its quite nice
TWRP Link - http://forum.xda-developers.com/showthread.php?t=1768742
Darkside Wipes - http://forum.xda-developers.com/showthread.php?t=1477955 (Only use with CWM 5.0.2.7)
CWM Touch(Latest) - http://forum.xda-developers.com/showthread.php?t=1844637
Click to expand...
Click to collapse
Just saw that last part by Playa, sorry didnt mean to kang you haha... but hes got it down ^^^
Related
Post Removed.
Add on
Post Removed.
maybe your phone not bricked
that say on cwm, your cwm cant mount everything right?
what cwm you use?
maybe your cwm doesnt support to mount ext4
because on my cm7 build, all partition will be ext4. except sdcard
have you try to format system, data, cache & sd-ext on your cwm?
now, all your partition must be at RFS again
and how you flash stock rom?
from odin? or?
Post Removed.
InMyBedNow said:
People with this phone, DO NOT FLASH CUSTOM ROMS THAT ARE MADE FOR JUST THE GTS5660 NOT THE M Model. I flashed CM7 ported by phiexz (amazing build btw) and when i wanted to flash back to stock, It bricked.
Click to expand...
Click to collapse
Sorry to hear about your issue but your assumption that you can't use other versions on an "M" is a little bit of a blanket statement. I've tried almost every release made and posted on xda and other than boot loops on occasion haven't had any lasting issues.
I do flash back to the lightly tweaked stock release by Darkshadow once in a while when starting fresh, which IS a "M" only release, but that's just so I have a clean starting point to upgrade from so I have the right WiFi and CSC already installed.
Heck, in my Odin ROM folder I have 7 different main release branches I liked and continue to follow from version to version. 3 of which I still switch between from week to week as new versions come up.
Like most things you just need to read, be careful, and try to know what your doing first. There will ALWAYS be risk, even with a stock ROM, that something will go wrong and brick your system but if you back things up and do your due diligence and wait until a trusted source posts a release with instructions you can mitigate the risk and get support.
As long as you can use Odin, CWM Recovery, or boot into phone you have a very good chance to fix or roll back. Just don't panic and/or fail to wait long enough for things to finish. Sometimes I've had to wait 5 minutes for a loop screen to reboot itself and complete...at other times pulling the battery was the only way to stop things. At other times a reboot into recovery to wipe all info was needed, including mounting all partitions first.
The only "M" versions I'm even aware of all come from Darkshadow....up to version 8 last time I checked.
So...yes...be careful...but to say you can't use GT-S5660 ROMs on a GT-S5660M isn't correct.
InMyBedNow said:
Yeah, from Odin. I'm pretty sure I was using the CWM from your Cm7 build, I installed it by flashing over my old cwm which was this one http://forum.xda-developers.com/showpost.php?p=16980117&postcount=559. I think i semi-bricked by pulling out the battery during bootloop, I shouldn't have. I'll probably sent it in to Samsung since I reflashed everything stock, even the recovery.
Click to expand...
Click to collapse
try to use your old cwm, and go to mount & storage
and you should format system. data & partition
and try to flash stock rom again
are u using adb?
can you paste here your log?
use: adb logcat
maybe i can help you
I thought the "rule" was don't flash the modem/radio - i.e. do a multi file Odin update and select nothing for modem/radio.
I took a stock s5660 2.3.5 rom from this forum and flashed my S5660m in this way, and it's fine.
Post Removed.
Post Removed.
Post Removed.
congratulation man
i'm happy to hear that ^^
I was running CM9 and then went to MIUI and then back to CM9. Ever since I have not been able to do a proper update to the CM9. Got fed up with it and tried to roll it back to one of the Nandroid backups. It got stuck for hours. Pulled the battery. Tried to go through the process of installing CM9 again fresh. Used Darkside SuperWipe and it kept freezing on "Wiping Cache" and the same thing when I use CWM (v6.0.1.4)! I have attached two screen shots. It reads:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
Then when I ask it to format the cache it get frozen.
How can I fix the cache? I cannot boot into CM9 or anything for that matter. I just get the awesome little Cyan Dude and the warp background flying at me continually until I pull the battery. Can anyone help? Is there any way to get ADB to work with out turning on USB Debugging on the phone?
Same issue with Clockworkmod Recovery
Sorry to say I can't answer your question, but actually just downloaded cm9 and was trying to factory reset in order to prepare to flash it and ran into the same cache issue. I tried everything and still couldn't get around it, almost bricked my phone, got stuck in a loop. Hadn't even done anything yet, except download the cm9 Rom. Also freezes when trying to wipe cache and when trying to restore a backup when it gets to the cache. I'll be keeping an eye on your post, and Ill let you know if I figure anything out as well.
I hate to say it but... use TWRP. It looks and works better. Trust me.
Sent from my SGH-T989 using xda app-developers app
whatiznt said:
I hate to say it but... use TWRP. It looks and works better. Trust me.
Click to expand...
Click to collapse
I trust you but on the Team Win Recovery Project's changelog you can see that it has not been updated in almost a year! CWM is updated much more frequently and also I enjoy having the touch version! Very convenient.
I've been reading that CWM v6.0.1.4 is causing problems with our phone. Would advise downgrading back to 5.0.2.7 and use the darkside scripts to wipe. I haven't had an issue with this version since it was released (other than needing to use darkside scripts lol).
jalight27 said:
Just downloaded cm9 and was trying to factory reset in order to prepare to flash it and ran into the same cache issue. I tried everything and still couldn't get around it, almost bricked my phone, got stuck in a loop. Hadn't even done anything yet, except download the cm9 Rom. Also freezes when trying to wipe cache and when trying to restore a backup when it gets to the cache. I'll be keeping an eye on your post, and Ill let you know if I figure anything out as well.
Click to expand...
Click to collapse
Thank you my friend. What you describe is exactly what happened to me. Tell me, what version of CWM Recovery do you have? Were you coming from stock? Which CM9 was it? Nightly, stable?
mintharis said:
I've been reading that CWM v6.0.1.4 is causing problems with our phone. Would advise downgrading back to 5.0.2.7 and use the darkside scripts to wipe. I haven't had an issue with this version since it was released (other than needing to use darkside scripts lol).
Click to expand...
Click to collapse
Please pardon my ignorance as I am relatively new at all this. How do you downgrade CWM? I am unable to boot the phone into the ROM. Can it be done through Recovery? ODIN?
I've looked around but I can't find a download for 5.0.2.7-- at least not one that's labeled specifically for our phone. It can be done in many different ways, flashing via recovery or Odin would definitely work, just need to find the right file.
Same version as you've got. Was actually coming from Jedi Mind Trick v8 and was going with the nighty. I loaded a backup of my stock ICS, which of course froze during the restore once it got to the cache, but I let it sit for like 15 min or so and then reset it and surprisingly it loaded up fine despite the fact that I had to reset it during the restore. I'm trying to follow up with the advice these two guys gave me on my post (really the same thing they've told you). With my extremely limited knowledge in this field I'm still working it all out and trying to make sure I ask the stupid questions so as not to mess anything up, well at least not too bad, lol.
mintharis said:
I've looked around but I can't find a download for 5.0.2.7-- at least not one that's labeled specifically for our phone. It can be done in many different ways, flashing via recovery or Odin would definitely work, just need to find the right file.
Click to expand...
Click to collapse
Go into rom manager and scroll down to previous versions
VoiD_Dweller said:
Go into rom manager and scroll down to previous versions
Click to expand...
Click to collapse
I don't have ROM manager installed. Does it provide a tar that can be flashed via Odin?
Newer Recovery
Clockworkmod 6 doesn't need the Darkside tools anymore. I had a similar problem but it was causing my phone to lock up. Just try using the regular cache wipe and dalvik cache wipe and see if that works for you.
mintharis said:
I've been reading that CWM v6.0.1.4 is causing problems with our phone. Would advise downgrading back to 5.0.2.7 and use the darkside scripts to wipe. I haven't had an issue with this version since it was released (other than needing to use darkside scripts lol).
Click to expand...
Click to collapse
I can confirm this, I have a samsung galaxy S II and I was having HUGE problems with the newer version of CWM. Cache would not clear at all even with darksides super wipe. My CM9 was stuck in a boot loop because I had forgotten to clear my cache and factory reset, and I was not able to do this at all, so i thought i was screwed.
However what i did was flash an older version of CWM (5.0.2.7) through odin, and BAM I was able to clear all my data with no problem and reflash CM9. Works perfectly now.
Pugnap00 said:
I can confirm this, I have a samsung galaxy S II and I was having HUGE problems with the newer version of CWM. Cache would not clear at all even with darksides super wipe. My CM9 was stuck in a boot loop because I had forgotten to clear my cache and factory reset, and I was not able to do this at all, so i thought i was screwed.
However what i did was flash an older version of CWM (5.0.2.7) through odin, and BAM I was able to clear all my data with no problem and reflash CM9. Works perfectly now.
Click to expand...
Click to collapse
Can you please provide a link for the 5.0.2.7 tar you flashed?
mintharis said:
I've been reading that CWM v6.0.1.4 is causing problems with our phone. Would advise downgrading back to 5.0.2.7 and use the darkside scripts to wipe. I haven't had an issue with this version since it was released (other than needing to use darkside scripts lol).
Click to expand...
Click to collapse
CWM v6.0.1.4 has pretty much made my phone useless. When in Recovery I can't even scroll down or up. I even tried restarting my phone to downgrade but I have no response from my MENU, HOME, BACK or SEARCH button.
WORD OF ADVICE. PLEASE STAY AWAY FROM CWM v6.0.1.4.
EdwardLThompson said:
I was running CM9 and then went to MIUI and then back to CM9. Ever since I have not been able to do a proper update to the CM9. Got fed up with it and tried to roll it back to one of the Nandroid backups. It got stuck for hours. Pulled the battery. Tried to go through the process of installing CM9 again fresh. Used Darkside SuperWipe and it kept freezing on "Wiping Cache" and the same thing when I use CWM (v6.0.1.4)! I have attached two screen shots. It reads:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
Then when I ask it to format the cache it get frozen.
How can I fix the cache? I cannot boot into CM9 or anything for that matter. I just get the awesome little Cyan Dude and the warp background flying at me continually until I pull the battery. Can anyone help? Is there any way to get ADB to work with out turning on USB Debugging on the phone?
Click to expand...
Click to collapse
Simple Solution is that the Cache in your device is large, it has to be cleaned, For this use Darkside cache wipe. It Solves the problem.
suffuciently hungeom
mintharis said:
Can you please provide a link for the 5.0.2.7 tar you flashed?
Click to expand...
Click to collapse
Here you go,
Look at step 6, it will have links to the tar based on your carrier. Its actually 5.0.2.6, works just the same though.
http://theunlockr.com/2011/12/01/how-to-root-the-samsung-galaxy-s-ii-all-versions/
I hope this helps you!
That happened to me as well when I was going to update to CM10. The faq for CM10 says you need to update to a Touch version of CWM which ROM Manager really wanted to install the Touch version. CWM shows it's version 6 and the menus were different but when I was finally able to get a ROM to boot in Safe Mode it reported CWM as being version 5.x. I could not mount or dismount the Cache in CWM. ODIN brought it back to stock but I messed around with the partition checkbox and hard bricked it. Otherwise it looked as tho things would have been ok after using ODIN to start over.
Darkside's wipe wouldn't work (either version) in this case.
screw cwm im going to twrp
ok same thing happened to me..but there are files i need in the phone and i dont think i want to use cwm after this...so can i use odin to flash it to twrp and recover my files through the twrp usb mount?
(lol nvm, i flashed a older version of cwm through odin and then recovered my files then got twrp)
mintharis said:
I've been reading that CWM v6.0.1.4 is causing problems with our phone. Would advise downgrading back to 5.0.2.7 and use the darkside scripts to wipe. I haven't had an issue with this version since it was released (other than needing to use darkside scripts lol).
Click to expand...
Click to collapse
Like I said in my earlier post had your exact problem and did exactly what was recommend here, and it worked beautifully. Solved all my problems, no residual effects to speak of. Now I can flash my roms in peace.
I have been looking around for about an hour or two trying to find a solid tutorial on how to install a custom recovery to install new Roms. I flashed my phone onto Virgin Mobile on FH13. It seems to me that there is more than meets the eye to installing a recovery on this phone. I really don't want to mess anything up at all. Could anyone guide me the right way as to how I can get CWM on my phone? I appreciate any help you can give me. Thanks!
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
bongzilla said:
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1953783
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
My phone already has root. Everything else is stock. 4.0.4, build FH13, with no custom recoveries.
I don't understand what you mean in your second paragraph with "repacked stock" or "custom tw kernel".
I am completely lost as to where I should be going. My plan is to install this rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies
How would I go around to getting this on my phone?
Also, what about this rom: http://forum.xda-developers.com/showthread.php?t=1810315
I am not sure which rom runs the fastest and most efficient. There are so many kernels for so many things, I have absolutely no idea which kernel to flash and how to flash it.
EDIT: So I have done some more reading up and I THINK I can starting to understand some of it. I assume the steps are to:
1. Install Mobile Odin Lite on my phone.
2. Flash the EL26 kernel on Odin Lite. Link to kernel: http://forum.xda-developers.com/showthread.php?t=1662295 (first kernel on the page)
3. This part I am kinda lost. Not sure if that kernel installed a new recovery or not. I assume I just reboot and go into recovery.
4. Nandroid a backup of my ICS stock that is on now? Can I even go back to this stock backup after putting on a new Rom? Which kernel would I need to install backup of stock?
5. Wipe data, dalvic, and install new Rom using instruction it came with. My problem is I want to run this Rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies and it has no instructions. I assume you just wipe data and dalvic?
6. flash Rom, then flash Gapp? It doesn't have a link for any of the Gapps, so either I have to find a link to download Gapp or that rom already comes with it? Not sure.
7. Reboot into new Rom? Not sure if I missed a step or not.
Another question I have is with the kernels. Can I just leave it on the EL26 kernel for daily use of the phone? Say I want to install maybe cm10 next, do I just keep it on EL26?
Sorry for the spam of questions. I like to be 100% certain.
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
RainMotorsports said:
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
Click to expand...
Click to collapse
Ah, I read it twice and now it makes more sense. I have a pretty good idea of what to do now.
Put rom and gapp on phone, install EL26, backup, full wipe, flash rom and gapp, rom will install new kernel for me, then just reboot.
Last question, I just want to make sure. What exactly is a full wipe on this phone. I have done plenty of full wipes on the evo 4g. I am just asking because I hear some people have problems when they do a full wipe.
I really appreciate your help. Thank you!
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
RainMotorsports said:
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
Click to expand...
Click to collapse
That clarified a lot, thanks.
So I did it all. I did a factory reset from the new kernel. did dalvic also. I installed the new rom and gapp. Problem is that once I reboot, it shows the Galaxy SII screen, then goes into a black screen. I can't turn it back on again, so I remove the battery and it can restart. Does the same thing though. I followed your instruction and http://e4gtcm.blogspot.com/p/cm9-install-guide.html
What did I do wrong? I am worried I messed up my phone completely.
EDIT: So I went back into recovery and it was now a new version of CWM. I did everything over again; factory reset, cache, dalvic, and it is doing the same thing. Boots up "Galaxy SII" screen, then a black screen. It seems to still be on in the black screen seeing that it doesn't "turn" on again. I can hold if for 15 second or so for it to reset and does the same thing. Why is there a black screen?
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me. goo.im seems pretty slow today.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far. I can upload one of the builds I have if you think ti would help any.
RainMotorsports said:
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far.
Click to expand...
Click to collapse
Phew! I was pretty positive that I could still get back to something working, just my paranoid self was getting tense. I got 10/28. I guess I will do 10/20. Do you know what the other updates have? I would hate to install something that isn't working its most efficient.
Again, thank you so much. You were of great help! Good luck with the weather issue. Hope you're safe!
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
RainMotorsports said:
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
Click to expand...
Click to collapse
I just got it downloaded. It is now up and running perfectly. I appreciate all your help man, thanks a bunch. I live in Washington state. So the weather wont affect me.
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
n1stunna84 said:
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I assume you do the same thing as I did. Get the EL26 kernel and flash it with Mobile Odin. I would wait on someone else to confirm that though.
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
joshlete said:
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
Click to expand...
Click to collapse
You either need a kernel with built in over clock support(you'd see the CPU slider go up to 1400-1600 automatically if it was). Or a kernel that supports over locking in tegrak, which you "load over clock module" with in tegrak.
Both Kuban kernel and some of Agats kernels have built in support, mine you need to use tegrak as I have not added built in yet
You can get them all in rwilco's (awesome) kernel repository stickied in development
Sent from my SPH-D710 using xda premium
Hey everybody.
I used to flash all sorts of roms on my old galaxy vibrant but I bought a new t989 a few months ago and I want to go to a custom from the stock tmob bloatware infested ICS. I already rooted via odin and installed clockwork recovery, which comes up just fine with the usual volume and power combo so i'm good there.
My question is should I flash my first rom (probably jedi mind trick 5 or x1,or if anyone knows a daily driver ready jelly bean??)
via clockwork mod like on my vibrant? or do I use twrp which I also have via goo manager? I prefer cwm because I am familiar with how to wipe cache, reset and flash with it but I can't figure out why some mods recommend one or the other.
Also,
I keep seeing some roms that come with a radio zip and was wondering if all roms require this or is it just certain roms?
Thanks in advance for any help. I just don't want to wreck my phone the first time. Remember, I've flashed a million times on my vibrant but never on my t989 so any pointers or heads up would be appreciated.
Get darkside wipe scripts (both wipe cache and super wipe)
Go ahead with the Jedi X1 ROM its very stable and fast as hell
But if you want Jelly Bean I recommend Galaxy SBean v8 or Liquidsmooth rc8 they're the most stable JB ROMs from what I experienced
Remember to always wipe dalvic cache and fix permissions (darkside cache wipe) after flashing a new ROM
After you flash your ROM and Gapps then boot that's when you can flash kernels, mods, and apk's so it would have a lesser chance of a soft brick
Happy Flashing!
Sent from my SGH-T989 using xda app-developers app
arthurgreeeen said:
Get darkside wipe scripts (both wipe cache and super wipe)
Go ahead with the Jedi X1 ROM its very stable and fast as hell
But if you want Jelly Bean I recommend Galaxy SBean v8 or Liquidsmooth rc8 they're the most stable JB ROMs from what I experienced
Remember to always wipe dalvic cache and fix permissions (darkside cache wipe) after flashing a new ROM
After you flash your ROM and Gapps then boot that's when you can flash kernels, mods, and apk's so it would have a lesser chance of a soft brick
Happy Flashing!
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Cool. Thanks for the reply. I went and grabbed super wipe and cache wipe. So essentially, I just put those two on my sd and flash like I do a rom zip from recovery and then flash the rom itself and do a darkside cache wipe after new rom is installed before restarting and booting for the first time? Do I still need to do factory reset/wipe or is that part of the scripts? I have the goo app so I can use twrp instead since it's recommended for almost all roms I will be installing. Any major reason why, besides that it has touch function and backup renaming? Is it safe to install from the goo app on stock rom?
I think I will probably try one of the jellybean roms you suggested. I just didn't want random reboots, and I heard that's an issue with jelly bean roms but I think that might have been specific to aokp ones or something. Occasional FCs aren't too big of a deal though.
One other thing though... how do I fix permissions? I kept reading about that but never did it. Do you mean in recovery or under superuser?
how to properly flash a rom
http://forum.xda-developers.com/showthread.php?t=1926754
just follow that and you should be fine.
you can fix permission in recovery. its under advanced in cwm and twrp.
merrygocow said:
how to properly flash a rom
http://forum.xda-developers.com/showthread.php?t=1926754
just follow that and you should be fine.
you can fix permission in recovery. its under advanced in cwm and twrp.
Click to expand...
Click to collapse
Ok thanks. He seems to recommend not using the darkside scripts. I have a slightly older CWM 5.0.2.6 that I did via odin BTW so do I fall into the 'don't' use darkside category or does he mean anything after 5.0.2.7? I don't mind wiping cache and dalvik manually and doing all the formats if that's the case.
Do I fix permissions after I have booted the rom and waited 10 mins and restarted back into cwm or before I boot it for the first time?
benjmiester said:
Ok thanks. He seems to recommend not using the darkside scripts. I have a slightly older CWM 5.0.2.6 that I did via odin BTW so do I fall into the 'don't' use darkside category or does he mean anything after 5.0.2.7? I don't mind wiping cache and dalvik manually and doing all the formats if that's the case.
Do I fix permissions after I have booted the rom and waited 10 mins and restarted back into cwm or before I boot it for the first time?
Click to expand...
Click to collapse
I usually do it after flashing. And you don't need to do it every single time. Also, there's no need to follow everything down to the letter when you flash, wipe cache/dalvik/factory reset/wipe system/fix permissions/sit for 10 mins/reboot/reboot again/etc. Flashing is like cooking. As long as you don't deviate too much from the recipe, you'll get edible food (or a working ROM). If it doesn't work out, just toss the food out and try again (softbricked phone, reflash). If you try something stupid, you'll set your kitchen on fire when you don't have insurance (comparable to hard bricking your phone).
I usually wait till I've restored all my apps before fixing permissions, and then sometimes I don't if everything is working fine. As for recovery, I know you're familiar with CWM, but I'd recommend spending some time using TWRP. It's really great. You don't need the scripts with TWRP, but since TWRP lets you cue up zips, you can set it to do super wipe, ROM, gapps, and cache wipe all in one go. Kinda cool. And if you're itching to try jelly bean, AOKP JB milestone 1 is stable and smooth. There are even a couple custom kernels for it and CM10 (which has also reached a stable version, though I haven't tried it).
Sent from my beastly Galaxy S 2.
Dark side super wipe and cache wipe work perfectly on 5.0.2.6! That's how I got PACman ROM on my phone. I didn't bother with fix permissions. Well, I would say don't worry unless the instructions specify to do so.
Either way, I like CWM because I used it on my Samsung Galaxy Ace. Its just the wipes are broken for this phone so the scripts have to be used and work perfect. Happy flashing!
Sent from my SAMSUNG-SGH-T989 using xda premium
benjmiester said:
Ok thanks. He seems to recommend not using the darkside scripts. I have a slightly older CWM 5.0.2.6 that I did via odin BTW so do I fall into the 'don't' use darkside category or does he mean anything after 5.0.2.7? I don't mind wiping cache and dalvik manually and doing all the formats if that's the case.
Do I fix permissions after I have booted the rom and waited 10 mins and restarted back into cwm or before I boot it for the first time?
Click to expand...
Click to collapse
no it's fine to use the scripts w/ cwm 5. just don't use the scripts on cwm 6. that's what he meant.
i usually fix permission after the first reboot & waiting 10-15 mins.
i second the twrp recommendation...however if you're flashing something old, then cwm is the way to go. i haven't had any problems flashing anything in cwm. the latest twrp however failed me after i tried to flash a gb theme for jugg lol.
merrygocow said:
no it's fine to use the scripts w/ cwm 5. just don't use the scripts on cwm 6. that's what he meant.
i usually fix permission after the first reboot & waiting 10-15 mins.
i second the twrp recommendation...however if you're flashing something old, then cwm is the way to go. i haven't had any problems flashing anything in cwm. the latest twrp however failed me after i tried to flash a gb theme for jugg lol.
Click to expand...
Click to collapse
Ok, just wanted to make sure on that one.
Thanks for all the input everybody. Hopefully I will get a chance to do my flash over the holiday. I plan on going with the Sbean V8. Really all of the roms out look excellent but this one looks good for a JB daily driver. I went ahead and downloaded Jedi X1 too though in case the sbean doesn't work out for whatever reason. I have to tether my phone at home for internet so I thought it might be good to have a backup just in case PDAnet doesn't want to work.
Is twrp ok to install from Goo manager on my stock rom or should I flash a new rom and then use it from then on? I just want to make sure it won't conflict with the stocker or the CWM that I have on it already.
benjmiester said:
Ok, just wanted to make sure on that one.
Thanks for all the input everybody. Hopefully I will get a chance to do my flash over the holiday. I plan on going with the Sbean V8. Really all of the roms out look excellent but this one looks good for a JB daily driver. I went ahead and downloaded Jedi X1 too though in case the sbean doesn't work out for whatever reason. I have to tether my phone at home for internet so I thought it might be good to have a backup just in case PDAnet doesn't want to work.
Is twrp ok to install from Goo manager on my stock rom or should I flash a new rom and then use it from then on? I just want to make sure it won't conflict with the stocker or the CWM that I have on it already.
Click to expand...
Click to collapse
--Update--
I got Sbean v8 installed and working just wonderfully! I used CWM for my install with the darkside superwipe and cache wipe scripts. Everything went fine and i'm very happy with the new rom. Thanks everyone. I hope this thread will help any other first flashers in the future.
And have you had any problems with it making backups, flashing, etc. ? I am still on TWRP 2.3.1 because I've heard that all of the later versions have had problems. Just want some clarification. Thanks!
I'm currently using 2.5.0.0 and not having any problems (other than the time is still wrong). I've backed up and restored from 2.5.0.0. as well.
Joe0113 said:
And have you had any problems with it making backups, flashing, etc. ? I am still on TWRP 2.3.1 because I've heard that all of the later versions have had problems. Just want some clarification. Thanks!
Click to expand...
Click to collapse
The later versions do not have 'problems' but rather minor issues that can be dealt with, such as returning you to main menu upon scrolling and making selections on your sd cards. These are manageable. However 2.5 has been the most stable version I as well as others have experienced.
Sent from my Nexus 4 using xda premium
2.5 has been fine for me, I think more people have had correct time than those who haven't. My time is correct on 2.5 and I've had no issues with it, also the UI change is nice.
Do 2.5.0 have mount as usb storage? They removed in after 2.4.2.0, but don't know if it was added again.
I still on 2.3.3.0.
twrp is like getting a new car. Your 90s dont give you issues but you want a new one. What a dilemma....
Sent from my SPH-L710
csmasn said:
Do 2.5.0 have mount as usb storage? They removed in after 2.4.2.0, but don't know if it was added again.
I still on 2.3.3.0.
twrp is like getting a new car. Your 90s dont give you issues but you want a new one. What a dilemma....
Sent from my SPH-L710
Click to expand...
Click to collapse
They added it back. I haven't tested it, but the button is there.
topherk said:
They added it back. I haven't tested it, but the button is there.
Click to expand...
Click to collapse
All works, always keep a backup flashable of another version on your phone if you need the security.
Here is a link to them - http://forum.xda-developers.com/showthread.php?t=2151476
Naddict said:
All works, always keep a backup flashable of another version on your phone if you need the security.
Here is a link to them - http://forum.xda-developers.com/showthread.php?t=2151476
Click to expand...
Click to collapse
I don't keep one backup: I keep them all! (mainly so I can test when people have issues with x.y.z version of TWRP or CWM, but still). Oh, and btw, thanks for making the flashable ones... it's saved me many Odin flashes.
I made a nandroid in 2.5.0 and right away did a restore and it went fine.
Is there a twrp thats known for being the most stable??
Nooblube said:
Is there a twrp thats known for being the most stable??
Click to expand...
Click to collapse
I THINK 2.3.1.0 (which is why I am running it), I've heard from some people that it's been the most stable, as later versions have some bugs.
But I'm gonna try the newest 2.5.0 now and see how it goes! :good:
Depends What You Want
I use TWRP 2.5.0.0 mainly cause I love to be on the latest version of a software unless it has some bug that causes it die or not function well. TWRP 2.5.0.0 works perfectly well in my case, I have had no glitches with it flashing ROMs but I haven't done backing up or restoring.
There is one thing I find annoying about 2.5.0.0 is that when I want to wipe my device's dalvik cache & cache, I have to click those two precisely by pressing Wipe>Advanced Wipe>Ticking Cache and Dalvik Cache. I find this annoying because if you just wipe it erases your caches along with your data and once I wiped my external SD card when I was trying to click Cache & Dalvik Cache. So yah if you can live with that, you should be fine.
Press Thanks If I Helped :highfive:
I always have issues with TWRP not being able to flash ROMs. All version of TWRP that I've tried have this same problem. There's very few ROMs it can flash on my phone. Doesn't matter whether they're signed, have the md5, or whether I disable all verification. Just never works. evo4noob's MIUI was one of the few ROMs it could flash. I had to switch over to CWM, which has been fine, but I like TWRP more; I especially like that TWRP has a file browser.
USB and ADB don't work for me in TWRP or CWM. I once wiped everything on my phone, everything, in a desperate attempt to start over from scratch. I had to put my external SD into another phone and transfer the ROM to it that way since there's no way to transfer files between my computer and SGS3 when it's in recovery mode.
It's been like this since day one. My phone is a finicky *****.
kingy9000 said:
I use TWRP 2.5.0.0 mainly cause I love to be on the latest version of a software unless it has some bug that causes it die or not function well. TWRP 2.5.0.0 works perfectly well in my case, I have had no glitches with it flashing ROMs but I haven't done backing up or restoring.
There is one thing I find annoying about 2.5.0.0 is that when I want to wipe my device's dalvik cache & cache, I have to click those two precisely by pressing Wipe>Advanced Wipe>Ticking Cache and Dalvik Cache. I find this annoying because if you just wipe it erases your caches along with your data and once I wiped my external SD card when I was trying to click Cache & Dalvik Cache. So yah if you can live with that, you should be fine.
Press Thanks If I Helped :highfive:
Click to expand...
Click to collapse
That's not a real problem. After you flash any zip, it has a button specifically to wipe Dalvik and cache. It doesn't matter if you wipe them before or after flashing, so you could just flash whatever, then press the button afterwards. It's super easy and convenient with no chance of wiping anything important.
Putting the ILLA in KILLA since 1985
I've used twrp since it debuted on any device I've owned they've supported. Only issue I've had is with the new screen timeout settings not sticking.
I generally flash while plugged in so don't care for timeout.
That being said, it doesn't seem to affect anything so I can deal with it.
I've found it faster than cwm and backups smaller. I'm also not a fan of using ROM manager just to get the updates/touch. I'll happily pay for any app I use consistently, but not just for one feature. I've supported Goo because I download a lot from their site.
Also remember vaguely an issue on the Epic 4g Touch involving cwm/ROM Manager that left me with little confidence in the developer. Please don't ask, can't remember specifics but it had more to do with attitude than the real issue.
I've been running 2.5.0.0 almost from the day it was released without problems. Backups, restores (from 2.5.0.0 as well as the previous several versions) and wipes all working as expected.