Related
There is an awful lot of dust building up in the bottom left corner of my screen making it really hard to see the screen excpecially when im outside.
Anyone ever have this issue or know an easy way how i can get it out of there?
I have a good bit of dust above the back and search keys. It's starting to get annoying. Especially on black backgrounds.
My 3rd generation iPod touch had the same problem. But I have the 4th gen and there's no dust whatsoever. But I'm pretty sure the screen and glass are fused together somehow.
Sent from my ADR6300 using XDA App
I have this same issue on my old phone (D2), there's dust underneath the top layer of the screen that I can't seem to get out. Would definitely be interested in a solution for this.
Sent from my Incredible using XDA App
Dust in my screen, all we are is dust in my screen, yaaaa all we are is dust in my screen!
Sent from my ADR6300 using XDA App
Same problem here but in the top left and now middle of the screen. When I had my Storm I took it in for this and they did replace the phone for me. Right now though I finally got a good dinc after two bad refurbished ones so I think I may hold onto it until my warranty runs out then take it apart and try to clean the dust out myself. From the disassembly videos it looks pretty easy but my only concern is that there is a missing (probably just a foam strip) and this will keep happening. I'd be interested to hear of other people with the same issue and their fixes. The dust is pretty annoying for me too, and especially noticeable in the sun.
Sent from my ADR6300 using XDA App
Do you guys use invisishield? With my shield an silicone case. , my phone is completely encased.
Sent from my ADR6300 using XDA App
I like to run all my stuff nude. No case, no screen protector. Save for my iPad, it has the Apple case so its easier to type on. No screen protection though. I prefer the feel of the glass.
Sent from my ADR6300 using XDA App
BrettApple said:
I like to run all my stuff nude. No case, no screen protector. Save for my iPad, it has the Apple case so its easier to type on. No screen protection though. I prefer the feel of the glass.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
The shield is awesome, well worth it. Feels great and does not scratch. The silicone has saved my bacon more than once. Phone looks brand new, had it since day one.
Sent from my ADR6300 using XDA App
+1 for screen protector (invisishield is too sticky for me, I like the cheap ones). But if you can't get dust out with compressed air I know I've spilled many solvents on my screen and haven't dissolved it yet (nearly have my Chem degree)
luke1987 said:
+1 for screen protector (invisishield is too sticky for me, I like the cheap ones). But if you can't get dust out with compressed air I know I've spilled many solvents on my screen and haven't dissolved it yet (nearly have my Chem degree)
Click to expand...
Click to collapse
My invisishield is not sticky at all, almost a lubed feel. Its amazing. I like it cause it doesnt scratch and its harder to fingerprint.
Sent from my ADR6300 using XDA App
donnyp1 said:
Dust in my screen, all we are is dust in my screen, yaaaa all we are is dust in my screen!
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
dust in the screen, dust in the screen, looking like a fool with dust in your screen!!
Sorry im a loser
I had an invisible shield for a few months. It was ok, but it started getting dents in it. And they were annoying. Ive been without a screen protector for about 5 months now. And it hasn't scratched the screen at all. There is some scratches on the bottom right corner, but that's just the glass. Not on the screen part. I've even put it in my pocket with my keys a few times on accident.
Sent from my ADR6300 using XDA App
incubus26jc said:
dust in the screen, dust in the screen, looking like a fool with dust in your screen!!
Sorry im a loser
Click to expand...
Click to collapse
Lol, i was just thinking of the old song by kansas when i read this post!
Sent from my ADR6300 using XDA App
Duplicate post. Xda app fail.
Ok, here's a picture.
http://dl.dropbox.com/u/3683218/HTC_Incredible_Dust.JPG
Damn. Same thing on the D2 I'm getting rid of, not that much dust though. Anyone have any ideas to get that **** out?
I'm fighting with this issue as well, I never had a problem until the glass shattered and i took it apart and replaced it. A couple of weeks ago I took the phone apart again, dusted the screen & glass and put it back together with a piece of tape where I thought the dust would accumulate, to no avail.
My next idea is to find an extremely thin, black, rubberized material to wedge between the glass and the bezel. I have a feeling that there is some kind of lining missing.. Not sure what I wanna use just yet though for this.
Either way I have to take apart the phone one more time to get the dust out. Ill have to have my gf's phone with me to compare as well, maybe see if I can straight up see a piece in hers that isn't in mine.
DustinBooyah said:
I'm fighting with this issue as well, I never had a problem until the glass shattered and i took it apart and replaced it. A couple of weeks ago I took the phone apart again, dusted the screen & glass and put it back together with a piece of tape where I thought the dust would accumulate, to no avail.
My next idea is to find an extremely thin, black, rubberized material to wedge between the glass and the bezel. I have a feeling that there is some kind of lining missing.. Not sure what I wanna use just yet though for this.
Either way I have to take apart the phone one more time to get the dust out. Ill have to have my gf's phone with me to compare as well, maybe see if I can straight up see a piece in hers that isn't in mine.
Click to expand...
Click to collapse
Please post up when you compare the two or figure out a way to seal the dust out. None of the other replacement incredibles I've had ever got any dust in them, and this one just keeps getting worse.
Sent from my ADR6300 using XDA App
NemesisXV6800 said:
None of the other replacement incredibles I've had ever got any dust in them, and this one just keeps getting worse.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Just for the record. My friend has an SLCD model and his doesn't have any dust. Mine is an original AMOLED (Manufactured 4/2/2010). Got it on launch day (4/29/2010). And I believe he got his in November.
Sent from my ADR6300 using XDA App
I dont have any dust... weird.
I am ordering a new genuine OEM T-989 enclosure. I have seen a lot of people replace the screen digitizer combination. I have not seen any body remove the digitizer and screen from the bezel and mid frame.
Has anybody done this?
Does anybody have any information on this?
Any help would be greatly appreciated.
Sent from my SGH-T989 using Tapatalk 2
shnn2011 said:
I am ordering a new genuine OEM T-989 enclosure. I have seen a lot of people replace the screen digitizer combination. I have not seen any body remove the digitizer and screen from the bezel and mid frame.
Has anybody done this?
Does anybody have any information on this?
Any help would be greatly appreciated.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I was going to do this till I see how difficult it is. It is almost impossible to separate the bezel from the digitizer with out breaking the screen. YouTube it.
Sent from my Galaxy SII T-mobile using xda premium
yeislak said:
I was going to do this till I see how difficult it is. It is almost impossible to separate the bezel from the digitizer with out breaking the screen. YouTube it.
Sent from my Galaxy SII T-mobile using xda premium
Click to expand...
Click to collapse
not true, all you need is a heat gun/blow dryer and a steady hand + a pry tool.
KillaHurtz said:
not true, all you need is a heat gun/blow dryer and a steady hand + a pry tool.
Click to expand...
Click to collapse
Any advice on temperature settings and adhesive replacement / pry tool?
Sent from my SGH-T989 using Tapatalk 2
I got sand paper and took all the chrome off the bezel. Come to find out the plastic is a matte black. Looks sick and my phone doesn't look like crap anymore. Looks brand new. Will post pics later if interested.
Sent from my AOKP-T989 using xda premium
yeislak said:
I got sand paper and took all the chrome off the bezel. Come to find out the plastic is a matte black. Looks sick and my phone doesn't look like crap anymore. Looks brand new. Will post pics later if interested.
Sent from my AOKP-T989 using xda premium
Click to expand...
Click to collapse
What grain sand paper did you use? And any special technique in the sanding process?
Ayodeji13 said:
What grain sand paper did you use? And any special technique in the sanding process?
Click to expand...
Click to collapse
P600 I believe. I know it was 600 tho. And no technique I didn't even take the phone apart. I took the battery door off and make sure you have a screen protector on so you don't f up your ****. Just rub he paper hard on the bezel don't be afraid. It will take about 30 to 45 min maybe an hour with breaks cus your fingers will start to burn. Use a gloves they'll help.
Sent from my AOKP-T989 using xda premium
I'm at the doctors when I get out I'll put up some pics so you can see what it looks like before you do it. Also be careful you don't get to much the dusted paint in any port.
Sent from my AOKP-T989 using xda premium
here you go
I have been thinking that if it is impossible, could you not just sand off the bezel, then Dremel out the inside screen mount of the new frame and finally epoxy the new bezel where the old bezel used to reside with plastic epoxy?
I asked some expert phone repair guys at the CPR Cell Phone Repair franchise; and they said that the screen will never ever ever ever come off unless you are either a machine or really good. They stated that they would not be able to guaranty the screens safety especially considering the heat involved.
If it is done by Samsung at all without replacing the entire digitizer and screen combo I would assume they use some kind of vacuum suction cup to pull off the screen after the proper amount of heat is applied.
Or, we could just paying Samsung the quoted 100 dollars to have it done.
This is non warranty work, so does anyone think they will mind if the phone is rooted?
Here is where you can order parts.
I don't know if they are genuine.
http://www.parts4repair.com/samsung-galaxy-s-ii-t989/
shnn2011 said:
I have been thinking that if it is impossible, could you not just sand off the bezel, then Dremel out the inside screen mount of the new frame and finally epoxy the new bezel where the old bezel used to reside with plastic epoxy?
I asked some expert phone repair guys at the CPR Cell Phone Repair franchise; and they said that the screen will never ever ever ever come off unless you are either a machine or really good. They stated that they would not be able to guaranty the screens safety especially considering the heat involved.
If it is done by Samsung at all without replacing the entire digitizer and screen combo I would assume they use some kind of vacuum suction cup to pull off the screen after the proper amount of heat is applied.
Or, we could just paying Samsung the quoted 100 dollars to have it done.
This is non warranty work, so does anyone think they will mind if the phone is rooted?
Click to expand...
Click to collapse
The pictures above you post is what I did to my phone. I sanded the bezel without even taking it apart.
Sent from my SGH-T989 using xda premium
The Bezel is part of the frame I believe. I would bet allot of money you can't get the screen of without cracking the digitizer. But, heat the top and bottom, that is where the greatest concentration of adhesive is. And watch the ribbon to the capacitive buttons because they will be stuck to the screen. You will have to disconnect them.
Sent from my SGH-T989D using xda premium
yeislak said:
here you go
Click to expand...
Click to collapse
That looks pretty cool dude. I have a question for you tho. How did you set the DPI so high? Your icons are small and thats how I want mine to be except whenever I use the DPI app from the market, it causes problems with parts of the ROM. For example the google search bar will only go halfway across the screen.
yeislak said:
here you go
Click to expand...
Click to collapse
That looks badass. Wanna do it to mine since you in Miami? jk lol
yeislak said:
here you go
Click to expand...
Click to collapse
Is that android bot doing the Hokey Pokey?
The Team Infamous project is up and running. http://www.infamousdevelopers.com
Sent from my SGH-T989 using Tapatalk 2
I just got my replacement about a week ago. I bought this phone used and without the battery door. Scuffs included. Luckily I kept the screen immaculate. None the less now that I have a mint handset and bought a battery door... the T989 sure is a smexy fellow. IMO the best looking Galaxy s2. Too bad we never got the Exynos and had to settle for the much slower s3 SoC. I:-/
Sent from my SAMSUNG-SGH-T989 using xda premium
RushAOZ said:
I just got my replacement about a week ago. I bought this phone used and without the battery door. Scuffs included. Luckily I kept the screen immaculate. None the less now that I have a mint handset and bought a battery door... the T989 sure is a smexy fellow. IMO the best looking Galaxy s2. Too bad we never got the Exynos and had to settle for the much slower s3 SoC. I:-/
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Were running at 1.5 Ghz everyone else is at 1.2Ghz.
Sent from my SGH-T889 using Tapatalk 2
Site back up
The infamous website is back up.
http://www.infamousdevelopers.com
Ok first of all....I didn't think it through and therefore was being stupid on that day but anyways, down to the question. Ok, so I pulled off my screen protector, I noticed I had a few micro scratches (OCD is crazy and I was the few that could acutally notice it). I decided to wax the scratches off. Sadly, it didn't work and the worst part is that I got it into the cracks of my phones. Such as the edges of the bezel, around the earpiece, and home button. Now I see the a white line (wax) from where it and stayed there. I have attempted to remove it with cleaning alchohol and tooth brushes but to no avail. Does anyone know of a way to get this stuff out?
Thanks, yo
Screen scratches can't never leave unless you actually replace the screen lol. Maybe 10 years they will be a magic potion to heal the cracks but nothing yet, maybe that should be my invention!!
Sent from my SGH-T999 using xda app-developers app
I have the same dirt looking things between the glass and plastic but I couldn't get it off.. what really helps to keep it clean is a good case that covers the cracks.
Rule #1 Respect the Devs. Rule #2 Refer back to Rule #1
daxecutioner24 said:
Screen scratches can't never leave unless you actually replace the screen lol. Maybe 10 years they will be a magic potion to heal the cracks but nothing yet, maybe that should be my invention!!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I'm not talking about scratches but about the gunk that gets in between the cracks and crevices of the screen such as the space around the home button and bezel/screen edge.
I got some of it out with Goo Gone
I was in my school's library (office aid) and I saw some of that and decided to give it a go. It worked pretty good. However, I'll see how well it works after it dries and stays for a day. Crossing fingers right now.
Gurashieruro said:
I'm not talking about scratches but about the gunk that gets in between the cracks and crevices of the screen such as the space around the home button and bezel/screen edge.
Click to expand...
Click to collapse
I'm talking about how you should of just let the scratches be which led to This predicament, it's all good hope it works out.
Sent from my SGH-T999 using xda app-developers app
daxecutioner24 said:
I'm talking about how you should of just let the scratches be which led to This predicament, it's all good hope it works out.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Ah my bad. Well I am, I mean there is nothing really that you can do to the screen to the the scratches off (unless you want to replace the screen or sand it out, which is a waste for just a few scratches). Luckily the Goo Gone is working. But there are a few bits of leftover white wax that is left on the edge of the screen and around the earpiece. Still annoys the heck out of me (hard core OCD with it) so I'll continue working on it but glad it works. Well, at least it is better then it was.
Gurashieruro said:
Ah my bad. Well I am, I mean there is nothing really that you can do to the screen to the the scratches off (unless you want to replace the screen or sand it out, which is a waste for just a few scratches). Luckily the Goo Gone is working. But there are a few bits of leftover white wax that is left on the edge of the screen and around the earpiece. Still annoys the heck out of me (hard core OCD with it) so I'll continue working on it but glad it works. Well, at least it is better then it was.
Click to expand...
Click to collapse
Yeah I wouldn't call myself OCD but I understand how it is. I think a scratch would really bothered me but eventually ill get over it, hopefully that remaining wax is gets off keep trying lol
Sent from my SGH-T999 using xda app-developers app
My daughter splashed some milk on my phone and never told me (her brother turned her in a couple of days later). It dried much the same way in little cracks and spaces. A wooden toothpick did wonders.
Have been thinking of trying this
http://www.youtube.com/watch?v=EZuYzQrIHjA
Has anyone tried it and have any info on how it looks and whether it has stayed as good or corroded/got worse over time. From the video it looks really nice but not sure how it is in real life. I don't really like the look of it currently so am willing to give this a go if I get positive feedback.
Do it anyway - you can replace the bezel fairly easily right?
Yeah true. . But still don't wanna ruin it if it ends up turning into a mess
I actually was thinking about removing the chrome entirely by either using this method or by using sand paper, just not sure how that would turn out to be since i havent seen anyone else doing. I think for starters ill try this out tomorrow as i truly dislike the chrome look plus its a good time to cover up those scratched with more scratches.lol. Thanks for this video.
bushako said:
I actually was thinking about removing the chrome entirely by either using this method or by using sand paper, just not sure how that would turn out to be since i havent seen anyone else doing. I think for starters ill try this out tomorrow as i truly dislike the chrome look plus its a good time to cover up those scratched with more scratches.lol. Thanks for this video.
Click to expand...
Click to collapse
I did it and it actually looks really nice. And also seems to improve grip slightly hopefully it'll stay looking this good.
I used the green part of one of those washing sponge things. Don't apply too much pressure, start very lightly and work up the pressure when you feel confortable.
By the way, with the method I used it doesn't have any scratches at all.. just that lovely brushed chrome look.
okay couldnt wait so i went ahead and did it.
bushako said:
okay couldnt wait so i went ahead and did it.
Click to expand...
Click to collapse
What do you think of it?
Sent from my Galaxy Note II LTE using Tapatalk
fade2black101 said:
What do you think of it?
Sent from my Galaxy Note II LTE using Tapatalk
Click to expand...
Click to collapse
Its alright tbh. Thing is I always have the Samsung Protective Cover+ on coz without the cover the phone just feels flimsy and very delicate. But yea otherwise the bezel is still better looking with brushed metal look. I would only recommend to someone who already has a scratched up bezel.
Sent from my GT-N7100 using xda app-developers app
How about painting the bezel before brushing? What do you think? Is it possible? My devices bezel has some white points where the grey paint is gone.
_delice_doluca_ said:
How about painting the bezel before brushing? What do you think? Is it possible? My devices bezel has some white points where the grey paint is gone.
Click to expand...
Click to collapse
No idea
But with the cost and ease of replacing it, its cetainly worth a go.
Sent from my Galaxy Note II LTE using Tapatalk
_delice_doluca_ said:
How about painting the bezel before brushing? What do you think? Is it possible? My devices bezel has some white points where the grey paint is gone.
Click to expand...
Click to collapse
I wouldn't recommend painting over the existing chrome paint as it would be uneven and not really worth all the trouble especially if it already has some chipping. However, you could try plastic/rubber spray paint you can easily find at the hardware store. You can always take those things off easily leaving the chrome paint intact. Another option is to completely remove the chrome paint with perhaps a nail polish remover or something; you'll be left with a nice uni body like polycarbonate housing
Sent from my GT-N7100 using xda app-developers app
bushako said:
I wouldn't recommend painting over the existing chrome paint as it would be uneven and not really worth all the trouble especially if it already has some chipping. However, you could try plastic/rubber spray paint you can easily find at the hardware store. You can always take those things off easily leaving the chrome paint intact. Another option is to completely remove the chrome paint with perhaps a nail polish remover or something; you'll be left with a nice uni body like polycarbonate housing
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
That, I tried. But after I created a 1 cm white opening the fact suddenly hit me! Removing the paint on the buttons was not so easy and some grey paint would remain.
Hey guys, i'm looking for feedback. I had the gray bumper and everything was fine, but i thought the color was too light so i sold it on ebay and bought a black one.
The black one i received from Google is having an issue and i'm trying to see if it's happening to lots of people or if its just me (will determine if i ask for a refund or another one)
The fit is great like it was on the gray one, but on the black one i have, the front lip is losing its coating. There appears to be some kind of matte finish over the plastic and its coming off, giving a very uneven appearance to the front of the case. Obviously, this wouldn't be such a bad thing if it was happening anywhere else on the case. Not only is it annoying to look at, but these little flakes are pulling onto the screen much like dust or dandruff would.
I took a picture to show what i mean. This is the best i could do to show the issue, and it's happening around the entire case.
Hey man, that is definitely not happening to my case. I'm actually a little worried now looking at your pic, I really hope that doesn't begin happening to mine!
I have the same black case too.
If I were you I would exchange for another case.
Good luck!
Having similar issue here with the finish peeling on the power button. Gonna call Google
http://imgur.com/a/xaQEN
sesz said:
Having similar issue here with the finish peeling on the power button. Gonna call Google
http://imgur.com/a/xaQEN
Click to expand...
Click to collapse
I called and they are issuing a refund. They dont do it like devices where they'll send you a new one and then you just return the defective one. They didnt give me a hard time. I just explained the issue and they said sure no problem etc... So i ordered another one and i'll see how that goes.
I'm sending my black case back its coating is coming out
Sent from my Nexus 5 using xda premium
About that dust/dandruff thing - Its coming out of your skin/beard. Similar issue - I used scotch tape to remove the dots and then late cleaned the affected areas with nail polish remover (using cotton). Try it, it works!
Sent from my Nexus 5 using Tapatalk
arzbhatia said:
About that dust/dandruff thing - Its coming out of your skin/beard. Similar issue - I used scotch tape to remove the dots and then late cleaned the affected areas with nail polish remover (using cotton). Try it, it works!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
while i don't doubt what you're saying, i was just using the dust/dandruff thing as an analogy. It's not coming from my skin (and i don't have a beard), its the coating from the bumper peeling off. When it peels off, it looks very much like dust/dandruff and then clings to the screen. Sorry if i wasn't clearer.
mb3030 said:
while i don't doubt what you're saying, i was just using the dust/dandruff thing as an analogy. It's not coming from my skin (and i don't have a beard), its the coating from the bumper peeling off. When it peels off, it looks very much like dust/dandruff and then clings to the screen. Sorry if i wasn't clearer.
Click to expand...
Click to collapse
Whoops. Sorry about that!
Sent from my Nexus 5 using Tapatalk