Hi, my phone Note 2 baseband/ firmware is N7100UBALI9, but came with power AC charger USA prong(flat) with output 2 Ampere. All knowledge of electronics, I'm just wondering from a professional user (xda devs) is it safe using/charging regular charger output 0.5A or 1A?? or can degrades something inside the phone's/lifespan? All i know the device such iPad needs more Amperes to charge. Please check/see my charger photo below. I'm apologize my english is not perfect. I'm noob beginner. Thank you very much ,appreciate.
bongbongcong said:
Hi, my phone Note 2 baseband/ firmware is N7100UBALI9, but came with power AC charger USA prong(flat) with output 2 Ampere. All knowledge of electronics, I'm just wondering from a professional user (xda devs) is it safe using/charging regular charger output 0.5A or 1A?? or can degrades something inside the phone's/lifespan? All i know the device such iPad needs more Amperes to charge. Please check/see my charger photo below. I'm apologize my english is not perfect. I'm noob beginner. Thank you very much ,appreciate.
Click to expand...
Click to collapse
My charger is 2 amp too (bought it Sweden). My older S2 has a 0.7 amp charger (both standard original chargers). The chargers them self can handle the amps printed on them without breaking or extending the charge time. The chargers are more or less "stupid" power supplies. The electronics in the phone handles the battery charge current. The phone even monitors the battery temp, and the charge current can probably be either aborted or limited based on the temp.
My opinion, based on knowledge as a kind of "advanced" electrician...
Note II is designed for the 2A charger, that's what it needs. You can charge with lower outputs, but it'll take a lot longer to do so.
The amperage of the charger does not affect a phone battery life span. The phone draws the amount of amps needed.
I'm guessing since Samsung provided a 2amp charger, that the note 2 should be drawing that much amps. Any other charger with less amps won't harm it, but rather take longer to charge.
Sent from my SPH-L710 using xda app-developers app
So i will not worry. Thanks because i was not sure if okay or not. Thank you guys. Appreciate your answer.
there is a component in the phone which will limit the flow of max current into the phone like the S2 (450amp and 650amp, iirc the values). changer provides 2amps but phone will draw whatever it is needed. in cases if it allows, 2amps speeds up the charging process.
The phone actually draws 1300mA.
change values
sianzb0i said:
there is a component in the phone which will limit the flow of max current into the phone like the S2 (450amp and 650amp, iirc the values). changer provides 2amps but phone will draw whatever it is needed. in cases if it allows, 2amps speeds up the charging process.
Click to expand...
Click to collapse
hi! do you know how to change those iirc values? the charger provided with my note2 is rated 2A out. but when i charge, this charger generates a lot of heat. i think the heat is wasted current since the phone doesn't accept that much current. i just want to know how can i adjust these values.
thanks!
psycotrompus said:
hi! do you know how to change those iirc values? the charger provided with my note2 is rated 2A out. but when i charge, this charger generates a lot of heat. i think the heat is wasted current since the phone doesn't accept that much current. i just want to know how can i adjust these values.
thanks!
Click to expand...
Click to collapse
your charger is converting Alternating Current from your wall socket into Direct Current for your phone. The process isnt 100% efficient.
In PC's theres normally an efficiency rating that tells you how many watts of AC current is required to produce a certain amount of watts of DC current (converting from 110-240V down to 12V). ie. a 90% efficient power supply will draw 1000W of AC from your wall to produce 900W of DC for your PC. the remainder of that energy is lost in the conversion process and is often released as heat and other forms of energy.
same thing is happening in your charger. in the process of converting AC to DC (110-240V down to ~5V), some energy is lost, and some of that lost energy is released as heat. our note 2 can handle 2A of current with no issues, the heat is because our chargers are not 100% efficient in their conversion, not because the phone cant handle the current.
Related
I've tried to find the maximum current that the nexus will draw, without any luck.
some people have said that the galaxy s 2 draws a max of 1A because the phone itself says 1A, but thats wrong, as it says 1A on 3.7v, clearly talking about the input the phone draws from the battery... not the charging circuit... other people say the galaxy s2 limits current to 650mA for heat/safety reasons... I have no reason to believe or disbelieve this.
Getting back to my question, what's the max current that the charging circuit will take, I know the AC/DC adapter that came with my gsm gnexus is 1A/5V, but that may be more than enough, or not as much as the nexus could handle.
I ask because there are many 5v ac/dc converters that output more than 1A, some over 2A... would the nexus charge faster with this much current, and would it be good/bad for the battery?
this could be easily tested if someone has access to an EE LAB, giving the phone 5v, and seeing how much current it takes... would need a DC volt supply capable of >10W (5v/2A).
8steve8 said:
I've tried to find the maximum current that the nexus will draw, without any luck.
some people have said that the galaxy s 2 draws a max of 1A because the phone itself says 1A, but thats wrong, as it says 1A on 3.7v, clearly talking about the input the phone draws from the battery... not the charging circuit... other people say the galaxy s2 limits current to 650mA for heat/safety reasons... I have no reason to believe or disbelieve this.
Getting back to my question, what's the max current that the charging circuit will take, I know the AC/DC adapter that came with my gsm gnexus is 1A/5V, but that may be more than enough, or not as much as the nexus could handle.
I ask because there are many 5v ac/dc converters that output more than 1A, some over 2A... would the nexus charge faster with this much current, and would it be good/bad for the battery?
this could be easily tested if someone has access to an EE LAB, giving the phone 5v, and seeing how much current it takes... would need a DC volt supply capable of >10W (5v/2A).
Click to expand...
Click to collapse
I dont know the answer to your question but my nexus eats amperage like it is going out of style. I can charge from almost empty to full in about 90 minutes.
Sent from my Galaxy Nexus using xda premium
@rbiter said:
I dont know the answer to your question but my nexus eats amperage like it is going out of style. I can charge from almost empty to full in about 90 minutes.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Given the battery is 1850 mAh you are drawing a minimum of 1.85Ah/1.5h = 1.233 amps. Since your battery wasn't completely dead, you are drawing slighlty more.
But was the limit the Galaxy Nexus, or the charger? Also, if one were to use navigation or other power hog while in the car, the current draw should be greater without only some of that going to charge the battery.
[email protected] said:
Given the battery is 1850 mAh you are drawing a minimum of 1.85Ah/1.5h = 1.233 amps. Since your battery wasn't completely dead, you are drawing slighlty more.
But was the limit the Galaxy Nexus, or the charger? Also, if one were to use navigation or other power hog while in the car, the current draw should be greater without only some of that going to charge the battery.
Click to expand...
Click to collapse
if he has the GSM galaxy nexus, the battery is 1750 mah, and assuming his device was off or idle during this time, then the current you calculate is not a minimum, it's a maximum... if the battery was half full to start, then 90 minutes were spent charging half of the capacity, so the current was actually half of the amount you calculated.
to answer this question someone needs a nearly empty battery in a galaxy nexus, with the device off (just to be sure we are only measuring charging current, although most likely it is circuit limited, and not battery limited, so it probably wouldn't matter)...
Then they should try charging it with a 5V DC power source with unlimited current, with a way to monitor the current.
most charging circuits for these type of batteries are current limited, then voltage limited, so the battery must be close to empty so we are sure we are monitoring max current... the latter part of the charge is voltage limited and in the end is very small amounts of current.
I am getting a new usb 2.0 hub soon. I didnt know there was a bc 1.1 compliant device standard, aka battery charging 1.1, that allows charging at 1.5amps. But i think this applies to powered hubs, since usb 2.0 technically only allows 500ma, and of course charging from a computer will only allow 500ma. Samsung recent smartphones allow this type of charging, so im sure nexus can utilize it. And yes, sgs2 was limited to 650mah charging for some reason. I never followed up on if devs overcame the limitation. The sgs2 crowd turned me off from the device because of their elitist attitudes.
Crazy world, ay?
@rbiter said:
I am getting a new usb 2.0 hub soon. I didnt know there was a bc 1.1 compliant device standard, aka battery charging 1.1, that allows charging at 1.5amps. But i think this applies to powered hubs, since usb 2.0 technically only allows 500ma, and of course charging from a computer will only allow 500ma. Samsung recent smartphones allow this type of charging, so im sure nexus can utilize it. And yes, sgs2 was limited to 650mah charging for some reason. I never followed up on if devs overcame the limitation. The sgs2 crowd turned me off from the device because of their elitist attitudes.
Crazy world, ay?
Click to expand...
Click to collapse
yeah I'm trying to buy the best ac adaptor for my nexus, but finding info is difficult.. the one that came with my nexus is for europe, and is 5v/1A, but it may not be the optimal current. The market seems to have many adapters capable of 0.5A, 750mA, 850mA, 1A, and 2.1A (marketed for ipad)...
will the nexus benefit from a 2.1A ac/adapter even if it doesn't 'need' it?
The Nexus charger is rated at 1 amp. I'm using my Captivate charger at work, which is rated at .7 amps. I'm thinking just because the Nexus charger is rated at 1 amp, that doesn't meant the Nexus is actually drawing that much power. Anyway, the Captivate charger I have seems to work fine.
Any issues here?
8steve8 said:
yeah I'm trying to buy the best ac adaptor for my nexus, but finding info is difficult.. the one that came with my nexus is for europe, and is 5v/1A, but it may not be the optimal current. The market seems to have many adapters capable of 0.5A, 750mA, 850mA, 1A, and 2.1A (marketed for ipad)...
will the nexus benefit from a 2.1A ac/adapter even if it doesn't 'need' it?
Click to expand...
Click to collapse
Just get a 1amp charger. It is plenty, on the safe side and fast fast fast for the nexus. With a 1a Motorola charger I have it charges 1% a minute when I am not using phone. I got that powered hub yesterday. Charging the nexus off of it was about 1.5% a minute and I didn't see battery go above 33 degrees Celsius.
Sent from my Galaxy Nexus using xda premium
let me clarify that im not worried about what will "work" im looking for what's the ideal charger...
yes 0.7A will charge it, so will 1A, but the actual max current draw is still what I'm asking.
http://www.reddit.com/r/GalaxyNexus/comments/nvgt4/chargers_3000ma_worth_the_risk/c3cb636
http://www.reddit.com/r/Android/comments/nystt/galaxy_nexus_power_analysis_why_chargers_cant/
I measured the charging current at just less than 0.5A with the phone on and off. I too was thinking that a higher capacity charger would speed charging.
1 amp chargers are more than adequate. I did this check with the battery at 80%.
طوني تبولة said:
http://www.reddit.com/r/GalaxyNexus/comments/nvgt4/chargers_3000ma_worth_the_risk/c3cb636
http://www.reddit.com/r/Android/comments/nystt/galaxy_nexus_power_analysis_why_chargers_cant/
Click to expand...
Click to collapse
Thanks for these threads. I was curious, too, if it does any good or harm to my GN if I plug it into the 2.1A plug of my power bank.
not that i care if i break too but if there some way where i can use my 2.1 amp wall charger to fast charge my phone and use 2.1 amps rather than 1 a
I just picked up a Nexus 7 and was wondering if I can just use that 2A charger.
No.
You can go under but not over. You risk damaging the phone's charging circuit.
GldRush98 said:
No.
You can go under but not over. You risk damaging the phone's charging circuit.
Click to expand...
Click to collapse
Ummm. To the first response....your thinking of voltage not charging amperage. I might be wrong but I believe how much current your phone draws when charging is determined by the phone itself, not the charger. What you really want to watch for is a mismatch between the charger output voltage and phone input voltage, that's when the damage occurs
butikofer08 said:
Ummm. To the first response....your thinking of voltage not charging amperage. I might be wrong but I believe how much current your phone draws when charging is determined by the phone itself, not the charger. What you really want to watch for is a mismatch between the charger output voltage and phone input voltage, that's when the damage occurs
Click to expand...
Click to collapse
Your correct. The most it will draw at 5 volts is 1 amp. The best charger is the one that the phone comes with. If you want to learn more research ohms law and resistance balancing. Something like thevenin an mct.
tracerit said:
I just picked up a Nexus 7 and was wondering if I can just use that 2A charger.
Click to expand...
Click to collapse
Yes.
The Nexus7 charger will be just fine charging the Galaxy Nexus. It will not damage it at all. I use a Kindle Fire charger to charge my GNexus. It can provide up to 1.8 amps at a nice steady 5Volts, but it doesn't have to provide that many amps to charge the Nexus - so it doesn't.
Its the voltage, not the maximum amp capacity, that is critical, cannot be too high.
It is usually OK to use a too low amp capacity charger as well, the charging just takes longer. Usually...some chargers are designed poorly. When asked for more amps at 5V than they are designed to provide they could fail by just providing less amps than asked for at 5V, which would be fine but slow. What else could happen is that the voltage provided could start to vary. It could start to take on the characteristics of the AC current it is supposed to be converting to 5V DC. This can hurt your phone.
Moral of the story....the chargers that advertise half the charge time because they offer double the amperage are a scam/false. Just because they can provide up to that amperage doesn't matter, the device determines the actual current being pulled (I.e.--charging time)
So, I have powerbank and I have 2 ways of charging: 1A and 2.1A. which one to use when charging my note 2?
Handwritten from my Note 2
Depends on the cable you'd use. Samsung cable will go near 2amp, generic ones do about 1 amp
kebabs said:
Depends on the cable you'd use. Samsung cable will go near 2amp, generic ones do about 1 amp
Click to expand...
Click to collapse
I have samsung cable.. So is it smart to charge via 2.1 A ? Can it do some damage on the phone ?
I have a Momax external battery and have charged the phone with the 2.1A port. It didn't heat up, it didn't have any problems. I was planning on measuring the exact amperage that comes out of the samsung charger and the momax battery (iPower Pro), but I didn't get around to it, because I suspect the difference is actually smaller. There are many people who used more powerful chargers to charge their phones faster, and the only thing that degraded was the battery lifespan, but the difference in those cases was upwards of 0.5A between the original and the new charger. I find the 0.1A to be a small difference and I have no problem using the 2.1A port on the iPower.
So to answer your question, no, it won't damage your phone. Theoretically it damages your phone's battery, but it degrades anyway due to charging cycles, so you won't notice any damage caused by the extra 0.1A unless you plan on still using the note 2 10 years from now.
sandulea said:
I have a Momax external battery and have charged the phone with the 2.1A port. It didn't heat up, it didn't have any problems. I was planning on measuring the exact amperage that comes out of the samsung charger and the momax battery (iPower Pro), but I didn't get around to it, because I suspect the difference is actually smaller. There are many people who used more powerful chargers to charge their phones faster, and the only thing that degraded was the battery lifespan, but the difference in those cases was upwards of 0.5A between the original and the new charger. I find the 0.1A to be a small difference and I have no problem using the 2.1A port on the iPower.
So to answer your question, no, it won't damage your phone. Theoretically it damages your phone's battery, but it degrades anyway due to charging cycles, so you won't notice any damage caused by the extra 0.1A unless you plan on still using the note 2 10 years from now.
Click to expand...
Click to collapse
Thanks for reply mate ! I was thinking the same, but i needed some sort of confirmation tho
Use the 2.1A one.
The phone should only draw 2A from it anyway, that just means the port is capable of supplying 2.1A.
Using the 1A port will just charge your phone slowly, the 2.1A port should charge it as quick as the official charger, depending on which cable you use.
It is a matter of supply and demand. All USB devices can safely be plugged into any USB charger. Given an unlimited amount of current available from the charger, each device will still only draw only as much current as it is designed to draw. If the charger is rated 2.1 Amps or 5 Amps or 10 Amps, a 1.5 Amp device will still only draw 1.5 Amps. The charge rate will be at maximum Think of it like your house wiring. The circuit may have a 20 Amp circuit breaker in the basement but we plug in 40 Watt bulbs and 100 Watt bulbs and TVs and electric shavers that all draw different amounts of current. The 100 Watt bulb uses less than an amp but is unharmed being plugged into a 20 Amp receptacle (charger). Now we come to the flip side. If the charger Is rated lower than the device it just charges slower than it would if the charger could supply at least as much as the device uses. To go back to our example, the 1.5 Amp device plugged into a 1 Amp charger will take longer to charge that it would with a charger rated 1.5 Amps or higher. My analogy has one hole. If the stuff plugged into the house receptacles exceeds 20 Amps the circuit breaker pops. This will not happen with USB chargers as they limit the current and will not try to supply more than they are rated for. Stick to chargers rated as high as the one that came with your device or higher and you will be fine
I noticed that when I charge my Note 8.0 with the USB wall adapter that comes with it, charging only takes about 2-3 hours but when I use the power cable of my Samsung Galaxy S Advance, charging can take up to 4-6 hours.
Assuming that I don't mind the longer waiting time, will using the latter power cable to charge my device shorten its battery lifespan or damage it in anyway? Thanks!
Addtional details:
I'm guessing that the difference in charging time is due to the difference in current. High current contributes to greater heating, which damages the battery but I'm wondering if higher temperature over a shorter duration or lower temperature over a longer duration is more damanging. Is the difference even significant?
I've read this link How USB charging works, or how to avoid blowing up your smartphone from "is it safe to use any usb cable to charge s3?" and got the idea that my device isn't going to blow up or anything like that. I just want to know if it damages the device because I've spent a good fortune on it and I want it to last for as long as possible (hopefully a minimum of 5 years). Yes, any other advice on how to prolong device lifespan is also welcome. Thanks a lot guys!
The reason its taking longer is its not providing the same amt of juice the note charger is. I looked at the output of the samsung note 8 charger and its 2amps. Looking at an oem charger for your phone its 1000mah which is 1amp so half the charging amt thus the longer charging time. Now you need to take a look at the charger and read the output amperage on it and if its less then 2 amps you are fine. If its over 2 amps then I would discontinue using it as it could cause harm.
As long as the amperage of the other charger is less then the samsung note 8 charger you won't have any issues other then longer charging time. Once you go above the 2amp rating I would be concerned as you are putting more amps into the battery then what it could be rated for in the charging cycle.
sparker366 said:
The reason its taking longer is its not providing the same amt of juice the note charger is. I looked at the output of the samsung note 8 charger and its 2amps. Looking at an oem charger for your phone its 1000mah which is 1amp so half the charging amt thus the longer charging time. Now you need to take a look at the charger and read the output amperage on it and if its less then 2 amps you are fine. If its over 2 amps then I would discontinue using it as it could cause harm.
As long as the amperage of the other charger is less then the samsung note 8 charger you won't have any issues other then longer charging time. Once you go above the 2amp rating I would be concerned as you are putting more amps into the battery then what it could be rated for in the charging cycle.
Click to expand...
Click to collapse
Actually, the amps used to charge with is up to the device not the charger. If your device comes with a charger that has an output rating of [email protected] and you plug it into a charger rated at [email protected] it won't necessarily charge it any faster unless the device pulls more than it should. Just means the charger has a higher output rating and can handle more power hungry devices. It should not hurt the device. However, if you up the voltage than there will be problems so you need to make sure the charger does not exceed the voltage. Plugging the device into a charger with lower ratings will of course charge slower because the device cannot draw as much.
sparker366 said:
The reason its taking longer is its not providing the same amt of juice the note charger is. I looked at the output of the samsung note 8 charger and its 2amps. Looking at an oem charger for your phone its 1000mah which is 1amp so half the charging amt thus the longer charging time. Now you need to take a look at the charger and read the output amperage on it and if its less then 2 amps you are fine. If its over 2 amps then I would discontinue using it as it could cause harm.
As long as the amperage of the other charger is less then the samsung note 8 charger you won't have any issues other then longer charging time. Once you go above the 2amp rating I would be concerned as you are putting more amps into the battery then what it could be rated for in the charging cycle.
Click to expand...
Click to collapse
Thanks I checked the charger and it says 0.7amps.
Hi
watch this video to get all info about the Optimus G battery
https://www.youtube.com/watch?v=O7Q8E5dzyxg&list=PLShKiWbiCfxbiMFDOHnS2Y_2HzAMwsRpI&index=26
Nice tech. I liked the way they managed cpu activities besides all.
My question is that why it takes around 2:30 to charge the phone fully?
According to this: http://www.qualcomm.com/media/blog/...-charge-10-less-time-charging-more-time-doing
OG benefits from Quick charge 1.0 which should boost charging process. Is it boosted by default? Is 2:30 fast enough for a 2100 mAh battery? or it's something kernel related and should be enabled?
2:45-3:00 its the charging time and its just fine.
You can always use a bigger charger and ruin your battery faster. Or explode..
Sent from my G using Tapatalk Pro
nikos523 said:
2:45-3:00 its the charging time and its just fine.
You can always use a bigger charger and ruin your battery faster. Or explode..
Sent from my G using Tapatalk Pro
Click to expand...
Click to collapse
I don't want to ruin my battery bro. I'm just curious to know if other phones with the almost same specifications have similar charging time or not. I mean is this normal or not? Do you know about nexus 4 charging time? or xperia zr? these all have quick charge 1.0 while snapdragon 800 offers quick charge 2.0 and that's why phones like G2 having a battery with more capacity have under 2 hours charging time.
nikos523 said:
You can always use a bigger charger and ruin your battery faster. Or explode..
Click to expand...
Click to collapse
Well... Unless you use a charger that sets a current (extremely unlikely), it won't matter a single bit. Just a simple physics... All standard chargers provide stabilized voltage within certain current limits (that's your charger's Amp rating). The phone's battery charging circuit determines the current it draws from a charger. So, even if your bad-ass charger is capable of providing 10A output, your phone will not draw more than it needs when charging, which is about 1A (sorry, I don't know the exact charging current of the OG).
kt-Froggy said:
Well... Unless you use a charger that sets a current (extremely unlikely), it won't matter a single bit. Just a simple physics... All standard chargers provide stabilized voltage within certain current limits (that's your charger's Amp rating). The phone's battery charging circuit determines the current it draws from a charger. So, even if your bad-ass charger is capable of providing 10A output, your phone will not draw more than it needs when charging, which is about 1A (sorry, I don't know the exact charging current of the OG).
Click to expand...
Click to collapse
the charging current of OG is 1.2. So, you mean the phone won't be charged faster if one uses a higher voltage charger?
akahroba said:
the charging current of OG is 1.2. So, you mean the phone won't be charged faster if one uses a higher voltage charger?
Click to expand...
Click to collapse
If you use a higher voltage charger, you could simply fry your phone -- depends on the actual voltage. The protection circuit may simply shut off the input, or limit the voltage at 5V -- I don't know enough about the OG's schematics. But it should still limit the current at the value it's designed for. Anyway, I wouldn't experiment with that... But if you are talking about higher Amp-rated charger with 5V output, then it won't charge faster, unless the lower-rated charger is actually rated lower than the phone would take. Here, just a couple of examples, assuming 1.2A nominal charging current...
Example #1: 0.7A charger. The phone is trying to suck as much as it needs, but the charger can only supply 700mA. So, it will charge slowly.
Example #2: Stock 1.2A charger. The charger is supplying just what the phone needs, which is 1.2A. So, it will charge faster.
Example #3: 2A charger (or more). The phone will still draw 1.2A, even though the charger is capable of supplying more. So, it will charge at the same speed as with 1.2A charger.
Makes sense?
kt-Froggy said:
If you use a higher voltage charger, you could simply fry your phone -- depends on the actual voltage. The protection circuit may simply shut off the input, or limit the voltage at 5V -- I don't know enough about the OG's schematics. But it should still limit the current at the value it's designed for. Anyway, I wouldn't experiment with that... But if you are talking about higher Amp-rated charger with 5V output, then it won't charge faster, unless the lower-rated charger is actually rated lower than the phone would take. Here, just a couple of examples, assuming 1.2A nominal charging current...
Example #1: 0.7A charger. The phone is trying to suck as much as it needs, but the charger can only supply 700mA. So, it will charge slowly.
Example #2: Stock 1.2A charger. The charger is supplying just what the phone needs, which is 1.2A. So, it will charge faster.
Example #3: 2A charger (or more). The phone will still draw 1.2A, even though the charger is capable of supplying more. So, it will charge at the same speed as with 1.2A charger.
Makes sense?
Click to expand...
Click to collapse
Oh, I see. Thanks. But, I don't know about the schematics either. I don't know if the phone has this smartness to draw as much as it needs or just draws as much as given. So, I won't risk either.
akahroba said:
I don't know if the phone has this smartness to draw as much as it needs or just draws as much as given. So, I won't risk either.
Click to expand...
Click to collapse
Regardless of particular schematics, a properly designed charging circuit is always drawing the set current from a source. In other words, your phone is definitely smart enough to only take what it needs. Basically, "as much as given" in this context is incorrect statement... A charger "gives" a specific voltage (5VDC for USB-charged devices), and the device "takes" a specific current. So, no matter what the Amp rating of a charger is, it will only give as much juice (Amps) as the device decides to take (within a charger's Amp limit). If a charger can't provide enough current for the device, then you have a problem with slow charge, or no charge at all. But higher Amp-rated chargers are fine. If you have, let's say, a charger from a tablet rated at 2.5A, or a stabilized lab power supply rated at 20A, both of them would be OK to use for charging your OG. The only possible problem in this case could be a defective charging circuit in the phone, which might not limit the current the way it's designed to, and could draw enough from a high-powered charger to kill itself. Low-powered charger would simply not be able to provide a dangerous current, if that happens...
Having said that, I've got quite a zoo of various power supplies laying around, and I used all kinds of them rated up to 30Amp to charge different devices. Never had any problems.
Having said that, I've got quite a zoo of various power supplies laying around, and I used all kinds of them rated up to 30Amp to charge different devices. Never had any problems.
Click to expand...
Click to collapse
and you've never seen any acceleration in charging time? So, it's just a common mistake that people say higher Amp-rated charger results in faster charge?
E977 battery difference?!
look at these two screenshots. one of them is E977 (in Spanish) and the battery is written to be SiO Lithium-ion. (SiO+ is used in G2)
the other is for E975 and the battery is written to be Lithium-Polymer.
Are these two the same?! Or this is an improvement made in hardware revision 1.2?
akahroba said:
and you've never seen any acceleration in charging time? So, it's just a common mistake that people say higher Amp-rated charger results in faster charge?
Click to expand...
Click to collapse
As I said before, it really depends what exact Amp ratings you are comparing... If a charger is rated lower that a phone's charging circuit, it will certainly underperform, and will charge slowly. But if your charger's rating matches or exceeds the charging current required by phone, then it makes no difference.
I personally don't have an OG stock charger, so I don't have any experience using a charger rated specifically at 1.2A. I only have USB chargers rated at 700mA, 850mA, 1A and 2A. Plus, an assortment of other power supplies rated anywhere from 2A to 30A. Of course, I do see a faster charging when going from 700mA charger to 1A, and then to 2A, because the first two are under-rated compared to the phone's specs. However, once I go with 2A or the higher rated power sources, there's no difference at all.
Hope that explains it.
kt-Froggy said:
As I said before, it really depends what exact Amp ratings you are comparing... If a charger is rated lower that a phone's charging circuit, it will certainly underperform, and will charge slowly. But if your charger's rating matches or exceeds the charging current required by phone, then it makes no difference.
I personally don't have an OG stock charger, so I don't have any experience using a charger rated specifically at 1.2A. I only have USB chargers rated at 700mA, 850mA, 1A and 2A. Plus, an assortment of other power supplies rated anywhere from 2A to 30A. Of course, I do see a faster charging when going from 700mA charger to 1A, and then to 2A, because the first two are under-rated compared to the phone's specs. However, once I go with 2A or the higher rated power sources, there's no difference at all.
Hope that explains it.
Click to expand...
Click to collapse
Yes, the last sentence clarified it. Thanks alot mate.