[Q] regresar a bingerbread - Samsung Galaxy Gio GT-S5660

Hace tiempo empeze a flashear mi dispositivo
con roms en base a gingerbread,
despues pase a las roms de ICS
pero como aun tenian muchas fallas regrese a light orange v5
estaba jugando el GTA III
abri el terminal editor
e ingrese
un dato erroneo debibo a la falla de traduccion
me apareci "SU impulsar"
en lugar de "SU BOOST"
para activar el adreline boost
y no sucedio nada
al intentar al GTA me aparecio que no respondia
y asi probe con varias apps y lo mismo, lo reinicie
oh sorpresa se quedaba hasta la imagen de galaxy gio
intente instalar la rom nuevamente, y otras depues probe la
stock 2.3.6 , 2.3.3
asi q probe la cyanogen mod
y fue la unica q me ha corrido
ya que al instalar cualquier otra rom no stock
se me queda pasmado en la imagen galaxy gio
y en la stock todo corre normalmente en ODIN pero el celular me marca error
en el archivo CSC y se queda en la imagen de presentacion galaxy gio y se reinicia
lo intente rebajar hasta el froyo
pero ahi el movil quedo apagado de todo a todo
y con un truco lo revivi
y solo pude instalar ICS nuevamente
Si alguien sabe como regresar a mi stock
de otra manera
ya intente con varios comandos y nada
e incluso se daño mi linea y no me reconoce ninguna SIM
y por ahora solo puedo correr ICS (Maclaw) y Jelly bean (Maclaw y Jellaxy )
Extraño al confiable Gingerbread
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> English <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Some time ago I started to flash my device
with gingerbread based roms,
then go to the ICS roms
but still had many flaws as a light orange back v5
was playing GTA III
I opened the terminal editor
and enter
debibo wrong data to the failure of translation
I appeared "SU impulsar"
instead of "su boost"
to activate the boost adreline
and nothing happened
me trying to GTA appeared unresponsive
and also probe with several apps and the same, restart
oh surprise stayed until the image of galaxy gio
try installing the rom again, and the other probe depues
stock 2.3.6, 2.3.3
also probe the cyanogen mod q
and was the only one I have run q
because when you install any other rom not stock
I is amazed at the image galaxy gio
and the stock ODIN everything runs normally but mark me wrong cell
CSC and the file remains in the introduction image and restarts galaxy gio
I try to downgrade to froyo
but there the phone stayed off throughout the whole
and a trick I REVIVI
and I could only install ICS again
If anyone knows how to get back to my stock
otherwise
and try various commands and nothing
and even damage my line and I do not recognize any SIM
and for now I can only run ICS (Maclaw) and Jelly bean (Maclaw and Jellaxy)
Strange to reliable Gingerbread: (

Related

[Q] Help updating

Hi,
I have a new Desire which came with eclair, then I updated to Froyo and rooted it with unrevoked tool.
Now I receive the latest OTA update, I have decided to updated, but when rebooting the phone it all seemed it was going to install the update but all of a sudden appeared an android symbol with exclamation mark saying it was not possible to update it.
Do anybody here knows how I can fix this?
Thanks in advance
ARA LOS QUE USARON UNREVOKED 3 PARA ROOTEAR
Yo tengo una Desire rooteado con unrevoked 3, me descargaba la actualizacion, le daba a actualizar ,reiniciaba para actualizar, salia la pantalla negra con la caja pero a los pocos segundos aparecia un simbolo con el android y junto a él un triangulo con bordes blancos y en el centro del triangulo un simbolo de exclamación y me decia que no podia actualizar, me daba error.
Por si acaso pierdo el root yo creo que de momento paso de la actualizacion.

help¡¡¡¡¡¡ speaker always on in calls

hboot -6.01.1002, recovery : clockworld 5.02
Tengo problemas al instalar cualquier rom con base cyanogen (incluso las estables de ese sitio) se instalan bien (incluso si llamo o me llaman, cuando aun no reinicio todo funciona bien), pero si reinicio o se reinicia el telefono ,cuando llamo o me llaman el altavoz me aparece activo y debo desactivarlo en cada llamada, ya intente reinstalar varias veces haciendo todos los wipes, borre particiones en la sd y la cree nuevamente, intente hacer downgrade del hboot y todo el proceso finaliza correctamente pero no cambia la version del hboot solo borra el recovery y lo volvi a instalar, he quitado bateria con el telefono encendido y vuelto a colocar y nada. repito solo sucede con las cyanogen, si instalo la rom de fabrica o otra con sense todo funciona correctamente.
translate: by google:
hboot -6.01.1002, recovery: 5.2 clockworld
I have problems installing any rom based Cyanogen (including stable on that site) are installed well (even if I call or call me, when not even restart, everything works fine), but if I restart or reboot the phone itself, when I call or I called the speaker is active and i hace disable it on each call, and try reinstalling several times to make every wipe, delete partitions on the sD and create again, try to downgrade hboot and the whole process is completed but does not change the version hboot the only erases the recovery and I returned to install, I removed the phone battery and put back on and nothing. I repeat only happens with Cyanogen, if I install the factory rom or another sense everything is working .
i need help thanks

My Xperia is returned totally crazy, the camera does not work if not plugged in

Good morning people, hope the Esten going better than me, the day before yesterday install could unlock the bootloader and install Pacrom , the day yesterday stay with PureHalo , now seeking applications for camera in google Play, while testing one my phone was shut down abruptly.
When I turn back to (now plugged in ) , I get to try a little more, now it gets all weird .
When I unplug , turn off, WTF. Then I leave it charging for a while and seems to turn on , but when the ends start animcacion off. I connect it to the charger and Buala works , disconnect it , it stops working ( the battery also seems to work, tell me how much power you have , it is downloaded , it is loaded ) .
After trying several times more I realized that every time took less off , so I decided to reinstall Purehalo , I wipe data , cache , dalvik and install exactly the same problem. Flashie the boot again, and still the same problem .
What I noticed is that the problem is with the camera , is something like this:
Camara + plugged : Everything works , but it has to be encrufrado .
If I unplug the camera while this is all going to hell, goes out.
If you try to switch unplugged , sometimes on and sometimes not, but if you turn and entered the chamber , all the crap .
It is a hardware problem ? seems too bizarre to be a hardware problem , there may be some file or software that resists wipe data , wipe cache , wipe dalvik , flash boot and reinstall another room ? and what else you have to put up to get that problem?
I'm really worried right now the phone is very useless, and I do not like to lose my ZL
Bad English, Traductor de google
---------------------------
Spanish copy:
Buenos dias gente, espero que la esten pasando mejor que yo, el dia de antes de ayer instale pude desbloquear el Bootloader e instale Pacrom, el dia de ayer me quede con PureHalo, hoy buscando aplicaciones para camara en google Play, mientras probaba una, mi telefono se apago de golpe.
Cuando lo vuelvo a encender (ahora conectado a la corriente), me pongo a probarlo un poco mas, ahora se pone todo raro.
Cuando lo desconecto, se apaga, WTF. Entonces lo dejo cargando un rato y parece encender, pero cuando termina la animcacion de inicio se apaga. Lo conecto al cargador y buala, funciona, lo desconecto, deja de funcionar (la bateria tambien parece funcionar, me dice cuanta carga tiene, se descarga, se carga).
Despues probando varias veces mas me di cuenta de que cada vez tardaba menos en apagarse, asi que decidi volver a instalar Purehalo, hice wipe data, cache, dalvik e instale, exactamente el mismo problema. Flashie el boot de nuevo, y sigue con el mismo problema.
Lo que note es que el problema esta con la camara, es algo asi:
Camara + enchufado: Funciona todo, pero tiene que estar encrufrado.
Si lo desenchufo mientras esta la camara, se va todo a la mierda, se apaga.
Si lo trato de encender desenchufado, aveces enciende y aveces no, pero si enciende y entro a la camara, todo a la mierda.
Es un problema de Hardware? me parece demasiado bizarro para que sea un problema de hardware, puede existir algun archivo o software que resista wipe data, wipe cache, wipe dalvik, flasheo de boot y reinstalar otra room? y que mas le tengo que poner encima para sacar ese problema?
Estoy realmente preocupado, el telefono ahora mismo es MUY inutil, y no me gustaria perder mi ZL
Best solution for you is to revert to stock firmware
Flash stock ftf by flashtool and reinstall pacrom but dont do your camera thing
Sent from my C6502 using XDA Premium 4 mobile app
alkesh95 said:
Best solution for you is to revert to stock firmware
Flash stock ftf by flashtool and reinstall pacrom but dont do your camera thing
Sent from my C6502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry, I'm a bit new, try to flash this file Xperia ZL-C6502 India_1270 7911_R2C_10.4.1.B.0.101.ftf, but my kernel is to PacRom, so would not start (was in an infinite loop), so I returned PureHalo to put, you know Kernel (boot.img) you could use to return to stock firmware?
------------
Perdon, soy un poco nuevo, intente flashear este archivo Xperia ZL C6502 India_1270-7911_R2C_10.4.1.B.0.101.ftf, pero mi kernel es el de PacRom, asi que no encendia, (quedaba en un bucle infinito), asi que volvi a poner la PureHalo, sabes que Kernel (boot.img) podria usar para volver al firmware stock?
Agusx1211 said:
Sorry, I'm a bit new, try to flash this file Xperia ZL-C6502 India_1270 7911_R2C_10.4.1.B.0.101.ftf, but my kernel is to PacRom, so would not start (was in an infinite loop), so I returned PureHalo to put, you know Kernel (boot.img) you could use to return to stock firmware?
------------
Perdon, soy un poco nuevo, intente flashear este archivo Xperia ZL C6502 India_1270-7911_R2C_10.4.1.B.0.101.ftf, pero mi kernel es el de PacRom, asi que no encendia, (quedaba en un bucle infinito), asi que volvi a poner la PureHalo, sabes que Kernel (boot.img) podria usar para volver al firmware stock?
Click to expand...
Click to collapse
How are you flashing this file? ---> Xperia ZL C6502 India_1270-7911_R2C_10.4.1.B.0.101.ftf
With flashtool, or through recovery??
When you flash a .ftf through flashtool it replaces your boot.img with the one thats in the . ftf file.
ATRIXXIRTA said:
How are you flashing this file? ---> Xperia ZL C6502 India_1270-7911_R2C_10.4.1.B.0.101.ftf
With flashtool, or through recovery??
When you flash a .ftf through flashtool it replaces your boot.img with the one thats in the . ftf file.
Click to expand...
Click to collapse
Yes, flashing with Flashtool, but the file dont replace the Kernel (the kernel is the file boot.img?), i know that because keeps the "boot image" of PacRom, not Sony logo, when i flash the boot.img of another rom (PureHalo rom), return the sony logo. (but dont open the stock rom).
---------------
Si, flasheo con Flashtool, pero el archivo no remplaza al Kernel (el kernel es el archivo boot.img?), yo se esto porque la imagen que parece al encender el telefono es de "PacRom", no el logo de sony. Pero si cargo manualmente el boot.img de PureHalo, vuelve el logo de sony. (pero no entra a la stock rom).
Download only kernel from one of nuts thread and flash it
Sent from my C6502 using XDA Premium 4 mobile app
When flashing any rom, prove a lot, the phone is in a loop of renicio only starts and runs with PureHalo, or any rom installed from the Recovery.
Cuando flasheo con cualquier rom, prove un monton, el telefono queda en un bucle de renicio, solo enciende y funciona con PureHalo, o cualquier rom instalada desde el Recovery.
Sadly they're all the sympthoms of the battery defect issue;
Let me tell you I've tried everything and soft is not the problem; it'll just frustrate you. You should claim warranty if it's on time or else buy a new battery and change it, here's my thread:
http://forum.xda-developers.com/showthread.php?t=2660706
Still working at it's best :good:
PD: Defect battery is on a broken screen zl, the phone turns off on sony logo unless connected; on stand by, it can turn off randomly; if I push the camera button is a sure thing to happen.
Thank you very much for the help, unfortunately I can never figure out what has happened because my xperia zl was stolen! LOL a stone, stole a shame, thank you very much for the help.
Muchas gracias por la ayuda, lamentablemente nunca voy a poder averiguar que paso porque mi xperia zl fue robado! LOL se robaron una piedra, una lastima, muchas gracias por la ayuda.
The same problem
Agusx1211 said:
Good morning people, hope the Esten going better than me, the day before yesterday install could unlock the bootloader and install Pacrom , the day yesterday stay with PureHalo , now seeking applications for camera in google Play, while testing one my phone was shut down abruptly.
When I turn back to (now plugged in ) , I get to try a little more, now it gets all weird .
When I unplug , turn off, WTF. Then I leave it charging for a while and seems to turn on , but when the ends start animcacion off. I connect it to the charger and Buala works , disconnect it , it stops working ( the battery also seems to work, tell me how much power you have , it is downloaded , it is loaded ) .
After trying several times more I realized that every time took less off , so I decided to reinstall Purehalo , I wipe data , cache , dalvik and install exactly the same problem. Flashie the boot again, and still the same problem .
What I noticed is that the problem is with the camera , is something like this:
Camara + plugged : Everything works , but it has to be encrufrado .
If I unplug the camera while this is all going to hell, goes out.
If you try to switch unplugged , sometimes on and sometimes not, but if you turn and entered the chamber , all the crap .
It is a hardware problem ? seems too bizarre to be a hardware problem , there may be some file or software that resists wipe data , wipe cache , wipe dalvik , flash boot and reinstall another room ? and what else you have to put up to get that problem?
I'm really worried right now the phone is very useless, and I do not like to lose my ZL
Bad English, Traductor de google
---------------------------
Spanish copy:
Buenos dias gente, espero que la esten pasando mejor que yo, el dia de antes de ayer instale pude desbloquear el Bootloader e instale Pacrom, el dia de ayer me quede con PureHalo, hoy buscando aplicaciones para camara en google Play, mientras probaba una, mi telefono se apago de golpe.
Cuando lo vuelvo a encender (ahora conectado a la corriente), me pongo a probarlo un poco mas, ahora se pone todo raro.
Cuando lo desconecto, se apaga, WTF. Entonces lo dejo cargando un rato y parece encender, pero cuando termina la animcacion de inicio se apaga. Lo conecto al cargador y buala, funciona, lo desconecto, deja de funcionar (la bateria tambien parece funcionar, me dice cuanta carga tiene, se descarga, se carga).
Despues probando varias veces mas me di cuenta de que cada vez tardaba menos en apagarse, asi que decidi volver a instalar Purehalo, hice wipe data, cache, dalvik e instale, exactamente el mismo problema. Flashie el boot de nuevo, y sigue con el mismo problema.
Lo que note es que el problema esta con la camara, es algo asi:
Camara + enchufado: Funciona todo, pero tiene que estar encrufrado.
Si lo desenchufo mientras esta la camara, se va todo a la mierda, se apaga.
Si lo trato de encender desenchufado, aveces enciende y aveces no, pero si enciende y entro a la camara, todo a la mierda.
Es un problema de Hardware? me parece demasiado bizarro para que sea un problema de hardware, puede existir algun archivo o software que resista wipe data, wipe cache, wipe dalvik, flasheo de boot y reinstalar otra room? y que mas le tengo que poner encima para sacar ese problema?
Estoy realmente preocupado, el telefono ahora mismo es MUY inutil, y no me gustaria perder mi ZL
Click to expand...
Click to collapse
Hi, I have the same problem, the phone just starts via charger, once charger is unplugged, the phone switches off if an application is running
I have to buy a new battery, surely it take to get to Colombia approximately in 20 days
I will change the battery because I bought my phone (C6506) in Canadá, Look in youtube: Disassembly xperia zl
it's easy

Tengo 1 problema

Mod edit: Translation to English.
You will see xperia S LT26i have a unlocked and rooted with the original android 4.1.2 and CWM recovery but will not let me set you up for more than the TWRP and tried .... I have serious doubts also install
Vereis tengo un xperia S LT26i desbloqueado y roteado con android original 4.1.2 y recovery CWM pero no me deja instalarle por mas que lo e intentado el TWRP ....Tambien tengo serias dudas de instalar estas roms:Android 6.0.1 oneofakind o esta otra Android 6.0 basada en AOSP, no sé si hay que particionar antes o no ......Espero me ayuden...Gracias y saludos..

RN8P Sudden Restarts

Buen Día Comunidad XDA
Me gustaría consultarles si a alguno le sucede un tipo de Bugueo a la hora de utilizar sus dispositivos, por ejemplo al desbloquearlo con la huella o reconocimiento facial o hacer cambios entre la multitarea que sean muy rápidos, y la pantalla se vea pixelada y se congela por un par de segundos y luego trabaje normal! O cuando queda congelado por completo no se bloquea ni nada y lo que hace es reiniciarse
No sé que problemas sea, o si me recomiendan flashear nuevamente la ROM original, no tengo ninguna Custom ROM, está de fabrica!
Ayuda!!!!!!! ???????
MOD EDIT: Please post only in English according to the FORUM RULES,translation added below:
Good Day XDA Community
I would like to ask you if any of you have a bugueo type when using your devices, for example by unlocking it with your fingerprint or facial recognition or making changes between multitasking that are very fast, and the screen looks pixelated and freezes for a couple of seconds and then works normal! Or when it's completely frozen it doesn't crash or anything and what it does is restart
I don't know what problems it is, or if I recommend flashing the original ROM again, I don't have any Custom ROMs, it's manufactured!
Help!!!!!!! ???????
Rommel2198 said:
Buen Día Comunidad XDA
Me gustaría consultarles si a alguno le sucede un tipo de Bugueo a la hora de utilizar sus dispositivos, por ejemplo al desbloquearlo con la huella o reconocimiento facial o hacer cambios entre la multitarea que sean muy rápidos, y la pantalla se vea pixelada y se congela por un par de segundos y luego trabaje normal! O cuando queda congelado por completo no se bloquea ni nada y lo que hace es reiniciarse
No sé que problemas sea, o si me recomiendan flashear nuevamente la ROM original, no tengo ninguna Custom ROM, está de fabrica!
Ayuda!!!!!!!
Click to expand...
Click to collapse
It's mandatory to use English language.
I never had this kind of issues, I'm actually on the European version 12.0.1 and it works well so far.
Probably performing a factory reset prior to re-flash the stock ROM will solve the issue, also you could update the firmware to the latest available https://xiaomifirmwareupdater.com/firmware/begonia/
OK perfect...
colleague, let me tell you that I did a factory reset as you recommended and I solve part of the problem, but I decided to install the rom through MI Flash, and voila, problem solved
thank you very much, greetings

Categories

Resources