Related
Hey guys this is my new .zip.It includes
Build.prop script Made especially by (credits to [email protected])
loopy smoothness tweak(credits to lpy)
Screenstate_Scaling (Increases touch responsiveness)(Credits to Slaid480)
Cleaning script That clears dalvik-cache and cache useless files(Credits to Slaid480)
Kernel tweaking script (NO need to download sysctl.conf anymore )(Thanks to booster buster tweak)
Ondemand governor tweaks and some more minor tweaks
defragging script, zippaligning <-(credits to darky)(credits to gabwerkz)
UI tweaks,sd card tweaks and performance tweaks(credits to DynamicRam)
Disabling Verify-bytecode For Better resposing and More free RAM(credits to nibraas_reeza)
Live wallpapers hack in order to make them smoother (credits to desporovski01!)
System_server from Fugu tweaks(credits to ForeverSupra)
Sqlite optimizer from Lightning zap tweaks(credits to thomas.raines)
Speedy tweaks(credits to 0vermind)
Kickass kernelizer(Thanks to zeppelinrox)
Try it now! If you want performance Gains
Download link
http://forum.xda-developers.com/attachment.php?attachmentid=896963&d=132895759
WANT MORE? TRY OUT THOSE BUILD.PROP TWEAKS
[SOME BUILD.PROP TWEAKS THAT CAN ALSO HELP](just open build.prop and copy them to the end of the file.Please report if they work on your phone/rom )
[EXPERIMENTAL]
(Thanks Master&Slave )This might give you better video recording and picture taking results
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.enc.jpeg.quality=95
wi-fi speed increase tweaks
net.ipv4.tcp_ecn=0
net.ipv4.route.flush=1
net.ipv4.tcp_rfc1337=1
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.tcp_sack=1
net.ipv4.tcp_fack=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_wmem=4096 39000 187000
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_moderate_rcvbuf=1
[SetCPU] (this tweek only for if you have ondemand)
Are you using "on demand scaling"?You might wanna try these
Sampling -> 200000
Up Threshold -> 50
Down Thresold ->25
Ignore Nice Load -> 0
{Up/down thresold is responsible for scaling up/down CPU frequency(That means that when cpu hits the % you have set the prossecor will scale up and hit from (example) 245 mhz to 400 mhz50% is fairly because if you set it too high the phone will be slow and unresponsive.On the other hand if you set it to low then it will drain your battery faster
all tweek are EXPERIMENTAL i'm not sure this work but ou can try.
my device is hard brickd on cm7 testing. plz try and tell me it work or not. use cwm for tweek
Sir its work on my galaxy y the speed performance was great
Anything was pusssssssh like a rocket internet speed to but the ram still same.
My suggestion:ive change the permissions to check all as the same of all init d file and work. Before i edit permissions it wouldnt work.
But now my sgy run fasterssss
Sent from my GT-S5360 using XDA App
W H A T T H E H E L L!!!
this is my thread and you say that these tweaks are yours???
are you advertising my thread or are you coping it ??
ILL REPORT YOU AND ASK MODERATORS TO BAN YOU IF YOU THINK THAT THIS THREAD IS YOURS
**EDIT** ITS NOT A PATCH AND NOT EXPERIMENTAL
REPLY SOON OR YOU LL END UP BANNED
[email protected] said:
W H A T T H E H E L L!!!
this is my thread and you say that these tweaks are yours???
are you advertising my thread or are you coping it ??
ILL REPORT YOU AND ASK MODERATORS TO BAN YOU IF YOU THINK THAT THIS THREAD IS YOURS
**EDIT** ITS NOT A PATCH AND NOT EXPERIMENTAL
REPLY SOON OR YOU LL END UP BANNED
Click to expand...
Click to collapse
its a compilation of scripts, etc..he is not copying ur thread nor advertizing, he is just sharing the compilation..and he also stated ur name and credit for ur script goes to you..so i think he's safe..he is now owning this thread
anyways does this work for creed v2?
and how do i install it?
ronnieryan said:
its a compilation of scripts, etc..he is not copying ur thread nor advertizing, he is just sharing the compilation..and he also stated ur name and credit for ur script goes to you..so i think he's safe..he is now owning this thread
anyways does this work for creed v2?
and how do i install it?
Click to expand...
Click to collapse
HEY HEY HEY !! LOOK AT MY THREAD HEREhttp://forum.xda-developers.com/showthread.php?p=19501492#post19501492
HE HAS COPIED EVERY SINGLE WORD EXCEPT SOME WORDS HE HAS ADDED
AND NO HE DOESNT OWN THE THREAD!!!!!!!!!!!!
[email protected] said:
HEY HEY HEY !! LOOK AT MY THREAD HEREhttp://forum.xda-developers.com/showthread.php?p=19501492#post19501492
HE HAS COPIED EVERY SINGLE WORD EXCEPT SOME WORDS HE HAS ADDED
AND NO HE DOESNT OWN THE THREAD!!!!!!!!!!!!
Click to expand...
Click to collapse
oh ok, my bad, anyways, it seems to be a duplicate of ur thread..but posted here in the galaxy y section..just ask mods on what is their decition on this, and lets hear the side of the one who copied this thread
ronnieryan said:
oh ok, my bad, anyways, it seems to be a duplicate of ur thread..but posted here in the galaxy y section..just ask mods on what is their decition on this, and lets hear the side of the one who copied this thread
Click to expand...
Click to collapse
i already did dude
anyways if you wanna install it you can flash it through cwm recovery
This thread is closed pending investigation.
______________________
Sent from the Future !!
Disable CPU RenderingI'm not responsible for anything that goes wrong with your device, you know the risks of flashing files to root. Make a backup first.It's been confirmed that this tweak on Froyo based roms, causes an endless bootloop and doesn't seem to work. Although it's been confirmed to work on Harmonica. So from what I know it will work best on GB and ICS (JB need tests).
I've red this article so i want purpose this method for tweak more smoothness from our beloved HD2!
XDA-news
OP words:
"I started this thread over at the LG-VM670 forums at Android Central. I thought maybe it was about time I share it over here on XDA since it's a pretty great tweak and it works without any added issues.
But keep in mind, if your phone doesn't have adreno200 gpu drivers, this won't work and could probably cause an endless bootloop. Now that that's covered, read up and do this carefully, this will not work on every device and is only meant for adreno200. I may have another tweak up my sleeve, but I need a device with something other than adreno200, such as tegra, to test it out on, which I don't have at the moment. Anyway, this worked out quite well for the Optimus V users, I believe it works on Xperia devices as well and it's been confirmed to work on Galaxy SIII. I'll try my very best to keep this thread updated, I don't have a ton of devices to test this on so I'd really appreciate the feedback so I can update the main post and list whatever devices this tweak works with (nobody wants a endless bootloop, so let's inform each other) oh and before I forget.. MAKE A NANDROID BACKUP ALWAYS!! Just in case
I found this tweak while trying to look for a loopy smothness tweak made for ICS, but I ended up finding something better than loopy smoothness, a guide to disable CPU rendering. With this tweak you can take full advantage of your device's GPU. In other words you disable software rendering and enable hardware rendering instead"
Original thread
(related to) http://forum.xda-developers.com/showthread.php?t=1575984
Confirmed working on:
- BobZhome CM9 [VM670]
- quattrimus CM9 [VM670]
- mrg666 MiRaGe IHO [VM670]
- BobZhome IHO [VM670]
- Galaxy SIII
- Xperia devices
- Tegra Device
- any device with working adreno200 drivers (in this case my LG myTouch 4G is a good example, it worked marvelously and more noticeably on this device)
HOW TO
(thanks for the summary to thierry_hd2)
1) MAKE A NAND BACKUP OF YOUR ROM. Just in case something would go wrong
2) To disable CPU rendering the ONLY things to do are:
- with a file manager with root access go to system/lib/eg
- open the file egl.cfg. DELETE everything inside the file but keep this line: 0 1 adreno200
- rename libGLES_android.so from egl folder. Don't delete it so if there is an issue with your ROM you can revert back to this file.
- REBOOT
That's all you have to to to disable CPU rendering. Depending on the ROM you are using you'll see some improvements or not (compile the poll on the top of the page)
TEST (for return back) Flashable .zip with original ROM files (not tested yet - for who have black screen, try it before recovery) TEST
(Thanks to blacksn)
http://forum.xda-developers.com/attachment.php?attachmentid=1331025&d=1347811207
MY IMPRESSIONS:
I'm trying it now on Tytung V2.7 and seems to works very well.!! :good: this trick can show the limit of benchmarking system (they will give you low score respect the new general smoothness).
Some feedback comes from some users that saw how with this hack, they can now play with GTAIII or other games more fluently.
In addiction to this explanation, disabling CPU rendering reduce battery juice!
Set the permission to rw-r--r-- for the egl.cfg file.
What might you benefit from? So far this is what I noticed.
- performance boost
- speed boost
- increased responsiveness
- better audio quality
- apps such as Facebook that would become slow and unresponsive are suddenly blazing fast
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Some universal Build.Prop Tweaks
If you want, you can apply some extra tweaks. These tweaks will help your HD2 feel even smoother and should improve battery life. Again depending on the level of optimisation of your ROM, you'll experience or not improvements.
- Just to be sure I could go back to the original build.prop; for first made a backup of it!!!
- Then I just opened the build.prop file (in the system folder) and made all the modifications manually. Some of the tweaks where already included, other tweaks had different values!
We need help to test & describe the strings. I'm convinced that using some of them, we can reach new level of optimization.
Thinks You need to know is:
1. All options starting with ro.ril is applied only once during boot
2. Most of other options can be applied after phone booted using "adb shell" or terminal direcly on phone with command "setprop option"
3. All prop settings can be read with command "getprop" and can be redirected to file with command "getprop >> /mnt/sdcard/file.txt"
4. Better/easy way is to rename file and not delete while testing. In case You renamed file and go wrong always can put phone in recovery, mount system, connect phone to pc and restore/rename affected file. This will save you a lot of time and nerves.
(http://forum.xda-developers.com/showpost.php?p=31690267&postcount=89)
After some tests i reached new scores on our known benchs:
Antutu: 3180 (1155Mhz Smartass V2)
Quadrant: 1215 (1155Mhz Smartass V2)
Vellamo: 966 (near Galaxy Note and Galaxy Nexus)
Open build.prop (using Build Prop Editor from market) and modify or add the following strings (if they are not just included). All these settings/tweaks are rom and Android version independent.
dalvik.vm.dexopt-flags m=y
CHANGE TO
dalvik.vm.dexopt-flags m=y,o=v,u=y
then Save & Reboot
In this mode we have set up app optimization for unicore...you set u=n only if you are using a device up to 2 cores.
#Render UI with GPU
debug.sf.hw=1
#debug.composition.type=gpu
debug.composition.type=c2d
debug.performance.tuning=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
ro.sf.lcd_density=240
debug.fb.rgb565=0
# Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# This is a high density device with more memory, so larger vm heaps for it.
# and some dalvik speedups
dalvik.vm.heapsize=40m
# Get more RAM and faster responses by disabling verify-bytecode
#dalvik.vm.dexopt-flags=v=n,o=v,m=y
dalvik.vm.dexopt-flags=m=y,o=v,u=y
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.checkjni=0
dalvik.vm.checkjni=false
dalvik.vm.check-dex-sum=false
dalvik.vm.jniopts=warnonly
# gecata test
dalvik.vm.check-dex-sum=false
# gecata test
dalvik.vm.jmiopts=forcecopy
# Turn on Just In Time in dalvik virtual machine
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
# For HSDPA low throughput
ro.ril.disable.power.collapse=1
# For sensor sleep control
ro.ril.sensor.sleep.control=1
ro.wifi.hotspotUI=1
ro.tether.denied=false
# enable/disable data in roaming
#ro.com.android.dataroaming=true
ro.com.android.dataroaming=false
# For quick boot mode
# persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Hide debuging icon from taskbar
persist.adb.notify=0
persist.service.adb.enable=1
# Enable egl profiler - enable harware egl profile
debug.egl.profiler=1
#Makes streaming videos stream faster
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
# Decrease time for screen off/on durrign call
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Decrease dial out delay
ro.telephony.call_ring.delay=0
ring.delay=0
# Disable WiFi calling for EU models
ro.ril.enable.ganlite=0
#Noise Cancellation Off
htc.audio.alt.enable=0
htc.audio.hac.enable=0
### Kernel Tweaks
# Disable error checking (Should speed things up a bit)
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
### Allow purging of assets (System can free more Ram when needed) ###
persist.sys.purgeable_assets=1
# Disable strict mode checking
persist.android.strictmode=0
# Disable the zygote loader
ro.wmt.blcr.enable=0
# Keep launcher in memory
ro.HOME_APP_ADJ=1
# Won't let memory managers to kill Launcher
ro.PERCEPTIBLE_APP_ADJ=2
#ro.HOME_APP_MEM=2048
# Tweaks for battery saving
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#improve battery under no signal -- need test
ro.mot.eri.losalert.delay=1000
# For sensor sleep control
ro.ril.sensor.sleep.control=1
# Qualcomm display settings -- Video acceleration and HW degugging
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
#Bravia Engine Service
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
# Xloud Engine
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
media.xloud.enable=1
media.xloud.supported=true
# More precisely incall volume control
ro.config.vc_call_vol_steps=15
# Increase overall scrool speed and enable rotation to 270 degree
windowsmgr.max_events_per_sec=170
windowsmgr.support_rotation_270=true
# Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
### Disable Logers (safe battery + performance gain)
### Disable checkin services, error reporting and logging
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
### Touch tunning ###
touch.presure.scale=0.001
#ro.min_pointer_dur=
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
# Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=8
persist.data_netmgrd_mtu=1482
#net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
# Google DNS Tweak -- fastest dns
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
RED= Suggested
PURPLE= Just inside or not useful
Using part of tweaked dalvik setting is not recommended, because whole section is result of many calculations and correlations in options. Also it is highly recommended after putting these setting in build.prop to delete cache and dalvik cache and after first boot to make power off and fix permissions in recovery.
Thx to all Devs that will give a hand
Thx to gecata & Pixelfreak for the list.
Thx to all users for feedback
Sounds really interesting, I'm definitely trying it out soon
Could you please correct the links so we don't have to edit them in address bar manually (showthread.php instead of show....php)?
Swamp_cz said:
Sounds really interesting, I'm definitely trying it out soon
Could you please correct the links so we don't have to edit them in address bar manually (showthread.php instead of show....php)?
Click to expand...
Click to collapse
Just correct them! Thx ^_^
Just tried it on my Barebone CM7.
Although the ROM is amazing fast, it seems that this tweak improves the performance.
With original config i had some slight lags in LancherPro. Now no more lags...
Anybody knows a proper way to test if this is working?
I have almost immediate results!
Cheers
Don't want to be a fun spoiler but some things are there for a reason
what's the negative side of this mod?
Swamp_cz said:
Sounds really interesting, I'm definitely trying it out soon
Could you please correct the links so we don't have to edit them in address bar manually (showthread.php instead of show....php)?
Click to expand...
Click to collapse
try to click on link instead of copy-paste...
pirlano said:
what's the negative side of this mod?
Click to expand...
Click to collapse
Its just editing the config file to read only the GPU. You will notice a huge improvement in day to day tasks. However benchmarks will go down. But that just proves how benchmarks don't mean crap after this i'm using my device lagfree! also internet experience is better than before.
Vellamo score: 939 using this trick.
Antutu: 3040 (1075Mhz) 3100 (1155Mhz)
Quadrant Score: 1134
this thing works for now on PARANOIDANDROID HD2 v1.5b ICS 4.0.4
tw1st3d83 said:
try to click on link instead of copy-paste...
Click to expand...
Click to collapse
I did click it, even the adress was broken. Now it's ok, because good guy devilpera64 already fixed that.
Swamp_cz said:
I did click it, even the adress was broken. Now it's ok, because good guy devilpera64 already fixed that.
Click to expand...
Click to collapse
I'm studing for some other build.prop string tweaks..maybe we can reach new performance level :good: i'm looking into all general thread of XDA for find someother things to add. Because surely other people discovered some general tips in other forum's region
Thanks for this, yes, benchmarks drop Down slightly (i have 3103 score at 1190 MHz with this tweak), but, it really improves perfomance. Thank you! \(°_°\)
Can we use the zip file from the original thread to install? And had anybody tried this ok CM7?
Sent from my HD2 using Tapatalk 2
mexicandroid said:
Can we use the zip file from the original thread to install? And had anybody tried this ok CM7?
Sent from my HD2 using Tapatalk 2
Click to expand...
Click to collapse
It's ok! but if you install it manually you are sure to do everything correct
Sorry I feel like tard but for the life of I can't seem to get the flash able zip.....it said to register android forum and I did but still just says attachment... no file. I know its me, could somebody lend me a hand the kids are making me nuts and I wanna try this before we leave lol
Edit sorry never mind just had to view thread in desktop mode, the zip showed then.
Sent from my NexusHD2 using xda app-developers app
its not an flashable zip. you must do it yourself.
I spent some time for build.prop tweaking. Here is it. The sections are self documented, but if You want I can explain more. All these settings/tweaks are rom and Android version independent.
#Render UI with GPU
debug.sf.hw=1
#debug.composition.type=gpu
debug.composition.type=c2d
debug.performance.tuning=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
ro.sf.lcd_density=240
debug.fb.rgb565=0
# Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# This is a high density device with more memory, so larger vm heaps for it.
# and some dalvik speedups
dalvik.vm.heapsize=40m
# Get more RAM and faster responses by disabling verify-bytecode
#dalvik.vm.dexopt-flags=v=n,o=v,m=y
dalvik.vm.dexopt-flags=m=y,o=v,u=y
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.checkjni=0
dalvik.vm.checkjni=false
dalvik.vm.check-dex-sum=false
dalvik.vm.jniopts=warnonly
# gecata test
dalvik.vm.check-dex-sum=false
# gecata test
dalvik.vm.jmiopts=forcecopy
# Turn on Just In Time in dalvik virtual machine
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
# For HSDPA low throughput
ro.ril.disable.power.collapse=1
# For sensor sleep control
ro.ril.sensor.sleep.control=1
ro.wifi.hotspotUI=1
ro.tether.denied=false
# enable/disable data in roaming
#ro.com.android.dataroaming=true
ro.com.android.dataroaming=false
# For quick boot mode
# persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Hide debuging icon from taskbar
persist.adb.notify=0
persist.service.adb.enable=1
# Enable egl profiler - enable harware egl profile
debug.egl.profiler=1
#Makes streaming videos stream faster
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
# Decrease time for screen off/on durrign call
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Decrease dial out delay
ro.telephony.call_ring.delay=0
ring.delay=0
# Disable WiFi calling for EU models
ro.ril.enable.ganlite=0
#Noise Cancellation Off
htc.audio.alt.enable=0
htc.audio.hac.enable=0
### Kernel Tweaks
# Disable error checking (Should speed things up a bit)
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
### Allow purging of assets (System can free more Ram when needed) ###
persist.sys.purgeable_assets=1
# Disable strict mode checking
persist.android.strictmode=0
# Disable the zygote loader
ro.wmt.blcr.enable=0
# Keep launcher in memory
ro.HOME_APP_ADJ=1
# Won't let memory managers to kill Launcher
ro.PERCEPTIBLE_APP_ADJ=2
#ro.HOME_APP_MEM=2048
# Tweaks for battery saving
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#improve battery under no signal -- need test
ro.mot.eri.losalert.delay=1000
# For sensor sleep control
ro.ril.sensor.sleep.control=1
# Qualcomm display settings -- Video acceleration and HW degugging
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
#Bravia Engine Service
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
# Xloud Engine
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
media.xloud.enable=1
media.xloud.supported=true
# More precisely incall volume control
ro.config.vc_call_vol_steps=15
# Increase overall scrool speed and enable rotation to 270 degree
windowsmgr.max_events_per_sec=170
windowsmgr.support_rotation_270=true
# Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
### Disable Logers (safe battery + performance gain)
### Disable checkin services, error reporting and logging
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
### Touch tunning ###
touch.presure.scale=0.001
#ro.min_pointer_dur=
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
# Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=8
persist.data_netmgrd_mtu=1482
#net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,16384,256960
# Google DNS Tweak -- fastest dns
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
devilpera64 said:
I'm studing for some other build.prop string tweaks..maybe we can reach new performance level :good: i'm looking into all general thread of XDA for find someother things to add. Because surely other people discovered some general tips in other forum's region
Click to expand...
Click to collapse
Did someone try this on HTC HD2?
rikusuicide said:
its not an flashable zip. you must do it yourself.
Click to expand...
Click to collapse
It says right in the android forum link....things just got easier,here is a flash able zip if you don't want to do it manually... so I think it is. I just downloaded it and flashed successfully.
Sent from my NexusHD2 using xda app-developers app
I found this from freeyourandroid.com thought i would share it. I would happy If an experienced user has anything to say about it:
The following lines in the build.prop file can be added and edited to change several properties in your device:
debug.sf.hw = 1
Render UI with GPU (relieves pressure on CPU)
dalvik.vm.heapsize = 32m
Set size of Dalvik VM heap (how much RAM each instance of the VM is allowed); depending on how much RAM that is available to a device, this can be increased.
persist.adb.notify = 0
Stop debugging icon from appearing in status bar
windowsmgr.max_events_per_sec = 120
Increase to improve scrolling response
persist.sys.use_dithering = 0
Do not use surface dithering (surface dithering improves image quality)
debug.sf.nobootanimation = 1
Disable boot animation
ro.HOME_APP_ADJ = 1
force home launcher into memory
ro.sf.lcd_density = 240
Set screen density; change according to your device or what suits you, a lower value will display more but may be too small to use on a device with a smaller screen. Also note that changing the pixel density will make some applications in the new market ‘incompatible with your device’.
mot.proximity.delay = 150
Lower to fix black screen after calls issue
ro.telephony.call_ring.delay = 0
Decrease dialling out delay
ro.gsm.2nd_data_retry_config = max/_retries=3, 2000, 2000, 2000
Change MMS APN retry timer from 5s to 2s
wifi.supplicant_scan_interval = 120
ro.ril.disable.power.collapse = 0
pm.sleep_mode = 1
Increase battery saving potential
ro.com.android.dataroaming=true
Enables data-roaming by default in the build
ro.com.android.dateformat=dd-MM-yyyy
Changes default date format to day-month-year
ro.config.alarm_alert=*.ogg
ro.config.ringtone=*.ogg
ro.config.notification_sound=*.ogg
Changes the default sounds for each item. Must correlate to ogg files available in /system/media/audio/
ro.build.display.id=NAMEOFROM
In Settings>About Phone, it lists the name of the build number. This is where you set it.
ro.product.locale.language=en
ro.product.locale.region=GB
Sets the default region and language. You must have the correct letter combo, and the language must be available for this to work.
video.accelerate.hw=1 or 0
Whether to use hardware acceleration to render videos, doesn’t work on all devices
** Mind you, my attempt to change failed, because it said "failed to save". You probably wont have this problem.
Some add-ons
Please always do a backup before you made any changes
And try to do it one by one or at least group by group
So you would know which are working and which are not
And easier to revert changes
Good luck
HERE THEY COME:
Improve overall media quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
Click to expand...
Click to collapse
Qualcomm display settings -- Video acceleration and HW debugging
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
Click to expand...
Click to collapse
Increase overall scrool speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Click to expand...
Click to collapse
Touch tuning
touch.pressure.scale=0.001
Click to expand...
Click to collapse
Improve touch responsiveness through Hardware Rendering
debug.sf.hw=1
persist.sys.ui.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
debug.composition.type=cpu
Click to expand...
Click to collapse
According to some CM7 users, it is better for us to add debug.composition.type=cpu, please kindly refer to: http://madteam.co/forum/tutorials/(tut)big-performance-increase-on-cm79/
16 bit transparency
persist.sys.use_16bpp_alpha=1
Click to expand...
Click to collapse
Makes streaming videos stream faster
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=true
Click to expand...
Click to collapse
Improve Voice Call Clarity
ro.ril.enable.amr.wideband=1
Click to expand...
Click to collapse
All the credit goes to the OPs of the build.prop shared, I am just sharing what did I learnt from their helpful posts, hope it helps
https://play.google.com/store/apps/...vbS5qcnVtbXkuYXBwcy5idWlsZC5wcm9wLmVkaXRvciJd
Click to expand...
Click to collapse
Try Build Prop Editor to do the things
i thought these links will be a good source to see
http://forum.xda-developers.com/showthread.php?t=1735128
http://forum.xda-developers.com/showthread.php?t=1697040
ro.HOME_APP_ADJ = 1
Click to expand...
Click to collapse
AFAIK this code doesn't work anymore on ICS
** Mind you, my attempt to change failed, because it said "failed to save". You probably wont have this problem.
Click to expand...
Click to collapse
have you set your permission R/W ?
windowsmgr.max_events_per_sec = 120
Increase to improve scrolling response
I heard that the value still can be increased into 250 for single-core processor device. And on my phone the value is 250
FEATURES :
* Better Battery
- Deep Sleep Mode
- Scans WiFi Less Frequently (Saves Battery)
* Image Quality Increased
* Streams Video Faster
* Better Touch Response
* Faster Reboot
* Instant Call
- No Delay In Receiving/Making Calls
* Faster Launcher
- No/Very Little Lag
- Forces Launcher Into Memory
* Fixes FC Issues With Some Apps
* Fixes “Black Screen” Issue After Call
- Screen Appears Almost Instantly After Pulling Phone Away From Face
* Audio & Video Quality Increased
* Signal Tweaks
* Download & Upload Speed Increased
* Dalvic VM Tweaks
* Loads App Faster
* Frees More RAM
* Overall Performance Increased
And Many More ...
Click to expand...
Click to collapse
# Disable Error Checking
ro.kernel.android.checkjni=0
# Increase Quality Of MediaStreaming
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
# Disable BootAnimation
debug.sf.nobootanimation=1
#Force To Remain Launcher In Memory
ro.HOME_APP_ADJ=1
# Disable Waking Up Of Phone By Volume Buttons
ro.config.hwfeature_wakeupkey=0
# Off The Proximity Quiclky After Call
mot.proximity.delay=25
ro.lge.proximity.delay=25
# Signal Tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
# NetSpeed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
# Google DNS Tweak
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# Photo And Video Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
# Touch Responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=500
# Power Save Tweaks
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
# Disables Debug Icon On Status Bar
persist.adb.notify=0
# Fast Reboot Allow purging of assets (System can free more Ram when needed)
persist.sys.purgeable_assets=1
Use Jit (Dalvik just-in-time compiler)
dalvik.vm.execution-mode=int:jit
# Increasing The Video Recording Quality
ro.media.enc.hprof.vid.bps=8000000
# Screen Rotate To 270 degree
windowsmgr.support_rotation_270=true;
# Increase VM Heap Size(resolve some fc's)
dalvik.vm.heapsize=64m
# Render UI With GPU
debug.sf.hw=1
# Increasing It Will Make Mobile Smoother
windowsmgr.max_events_per_sec=150
# Video Acceleration Enabled
video.accelerate.hw=1
# Increase Performance
debug.performance.tuning=1
# Disable Sending Usage Data
ro.config.nocheckin=1
# Deeper Sleep/Better battery life
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
# Ringing Will Start Immediately
ro.telephony.call_ring.delay=0
#Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#wifi to scan less frequently
wifi.supplicant_scan_interval=180
#improve battery under no signal
ro.mot.eri.losalert.delay=1000
#makes apps load faster and frees more ram. (Edit exsisting line)
dalvik.vm.dexopt-flags=m=v,o=y
# Off The Proximity Quickly After Call
ro.lge.proximity.delay=25
mot.proximity.delay=25
Download BulidProp editor from attach
Requirements: This app is compatible with 4.0 or newer and of course needs root access to write to your Android's /system directory.
I'm not responsible for any problem caused by editing the build.prop file. I've tested the app and haven't bricked my phones.
does it work on one x plus ?? Tslam ya hany
aliko007 said:
does it work on one x plus ?? Tslam ya hany
Click to expand...
Click to collapse
yes it's for android 4.x , good arabic
codexc said:
yes it's for android 4.x , good arabic
Click to expand...
Click to collapse
@codexc would these settings work on a stock rom or do I need to be on a custom rom?
I would advise anyone who posts this sort of tweaks to read http://www.jeffmixon.com/examining-build-prop-tweaks-for-android-ics-a-comprehensive-guide-part-1/ and http://www.jeffmixon.com/examining-build-prop-tweaks-android-ics-comprehensive-guide-part-2/ to learn what does things and what does nothing
amirage said:
@codexc would these settings work on a stock rom or do I need to be on a custom rom?
Click to expand...
Click to collapse
yes, but some of works only on CM/AOSP
pandaball said:
I would advise anyone who posts this sort of tweaks to read http://www.jeffmixon.com/examining-build-prop-tweaks-for-android-ics-a-comprehensive-guide-part-1/ and http://www.jeffmixon.com/examining-build-prop-tweaks-android-ics-comprehensive-guide-part-2/ to learn what does things and what does nothing
Click to expand...
Click to collapse
all tweaks in OP is works with android 4.x and up , i see your links and all tweaks has "BUSTED/CONFIRMED" there
regards
# Disable Error Checking
ro.kernel.android.checkjni=0
Click to expand...
Click to collapse
Busted. The checkJni default value is already false. Setting either property to false or 0 in your build.prop is simply redundant and will have no added effect on your device.
#Force To Remain Launcher In Memory
ro.HOME_APP_ADJ=1
Click to expand...
Click to collapse
Busted. Remnant from Gingerbread days that is now hardcoded.
# Off The Proximity Quiclky After Call
mot.proximity.delay=25
ro.lge.proximity.delay=25
Click to expand...
Click to collapse
Busted. As you can probably tell, it only works for LG and Motorola, if it still works at all.
# Signal Tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
Click to expand...
Click to collapse
Only works for HTC. No other RIL allows you to modify this sort of thing.
# NetSpeed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
Click to expand...
Click to collapse
Use these instead
net.tcp.buffersize.default 4096,87380,704512,4096,16384,110208
net.tcp.buffersize.wifi 524288,1048576,2097152,262144,524288,1048576
net.tcp.buffersize.lte 4096,87380,1220608,4096,16384,563200
net.tcp.buffersize.umts 4096,87380,563200,4096,16384,110208
net.tcp.buffersize.hspa 4096,87380,704512,4096,16384,110208
net.tcp.buffersize.hsupa 4096,87380,704512,4096,16384,262144
net.tcp.buffersize.hsdpa 4096,87380,704512,4096,16384,262144
net.tcp.buffersize.hspap 4096,87380,1220608,4096,16384,393216
net.tcp.buffersize.edge 4096,26280,35040,4096,16384,35040
net.tcp.buffersize.gprs 4096,8760,11680,4096,8760,11680
net.tcp.buffersize.evdo 4096,87380,563200,4096,16384,262144
net.tcp.buffersize.evdo_b 4096,87380,704512,4096,16384,262144
Click to expand...
Click to collapse
Taken from https://github.com/CyanogenMod/android_device_htc_endeavoru/blob/cm-10.1/ramdisk/init.rc. Some may not apply to the HTC One X, like the LTE setting for example.
# Photo And Video Quality
ro.media.dec.jpeg.memcap=8000000
Click to expand...
Click to collapse
Busted. Completely unused in ICS and above.
# Touch Responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
Click to expand...
Click to collapse
Busted. Both do nothing in ICS.
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=500
Click to expand...
Click to collapse
Busted.
Many build.prop tweaks set this value to 300, but it seems this is a bad idea. As Google points out, Android maxes out at 60fps. The default value is already allow for a possible max_events_per_sec of 90. Even if you allow for 300 max_events_per_sec, you’ll only ever see 60 of these events in any given second. Therefore, any value much higher than 90 is unlikely to have any noticeable impact on your experience in general. Additionally, setting this value too high can starve other UI events that need to get processed, viz. touch inputs. You’re not likely to feel like your device is running very smoothly when it is busy processing thousands of scroll events instead of responding immediately to you clicking to try and open a link or an app. There may be some specific scenarios where increasing this value does appear to improve system feedback, but changing this value for all UI events across the board will likely cause more problems than it will solve.
Click to expand...
Click to collapse
# Power Save Tweaks
pm.sleep_mode=1
Click to expand...
Click to collapse
Busted. Actually selects a less efficient power mode. Furthermore, does nothing on non-MSM chipsets (ie. doesn't do anything on the One X)
# Fast Reboot Allow purging of assets (System can free more Ram when needed)
persist.sys.purgeable_assets=1
Click to expand...
Click to collapse
Busted. Only exists in CM codebase.
Use Jit (Dalvik just-in-time compiler)
dalvik.vm.execution-mode=int:jit
Click to expand...
Click to collapse
Useless. The default execution mode is usually JIT anyway.
# Increasing The Video Recording Quality
ro.media.enc.hprof.vid.bps=8000000
Click to expand...
Click to collapse
Set it to ro.media.enc.hprof.vid.bps=20000000 instead. The camera supports 20Mbps video fine.
# Increase VM Heap Size(resolve some fc's)
dalvik.vm.heapsize=64m
Click to expand...
Click to collapse
Busted. There's no point doing this, most app developers optimise their apps to go below this anyway.
# Increasing It Will Make Mobile Smoother
windowsmgr.max_events_per_sec=150
Click to expand...
Click to collapse
This was above anyway, busted.
# Video Acceleration Enabled
video.accelerate.hw=1
Click to expand...
Click to collapse
This was above too. Also busted.
# Increase Performance
debug.performance.tuning=1
Click to expand...
Click to collapse
Deja vu! Busted! Deja vu again!
# Disable Sending Usage Data
ro.config.nocheckin=1
Click to expand...
Click to collapse
Busted. Does nothing for Google services. ro.config.htc.nocheckin=1 will disable HTC checkin though.
# Deeper Sleep/Better battery life
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
Click to expand...
Click to collapse
What's deeper than deep sleep also, I seem to have seen this somewhere before lol
#wifi to scan less frequently
wifi.supplicant_scan_interval=180
Click to expand...
Click to collapse
Actually, this causes wifi to scan every 180ms, which is more than what people usually need it to, so it actually scans more frequently than default. A better value would be 250 or so.
#improve battery under no signal
ro.mot.eri.losalert.delay=1000
Click to expand...
Click to collapse
Motorola only.
#makes apps load faster and frees more ram. (Edit exsisting line)
dalvik.vm.dexopt-flags=m=v,o=y
Click to expand...
Click to collapse
I don't think this does anything because the syntax is wrong. It should be dalvik.vm.dexopt-flags=m=y, if this even does anything at all.
# Off The Proximity Quickly After Call
ro.lge.proximity.delay=25
mot.proximity.delay=25
Click to expand...
Click to collapse
I saw this somewhere up there.
Anyway, I've shown you here what works and what does not. I omitted those that I'm not sure about. Unsurprisingly, most don't work. So... this is more or less useless for the HTC One X.
pandaball said:
Busted. The checkJni default value is already false. Setting either property to false or 0 in your build.prop is simply redundant and will have no added effect on your device.
Busted. Remnant from Gingerbread days that is now hardcoded.
Busted. As you can probably tell, it only works for LG and Motorola, if it still works at all.
Only works for HTC. No other RIL allows you to modify this sort of thing.
Use these instead
Taken from https://github.com/CyanogenMod/android_device_htc_endeavoru/blob/cm-10.1/ramdisk/init.rc. Some may not apply to the HTC One X, like the LTE setting for example.
Busted. Completely unused in ICS and above.
Busted. Both do nothing in ICS.
Busted.
Busted. Actually selects a less efficient power mode. Furthermore, does nothing on non-MSM chipsets (ie. doesn't do anything on the One X)
Busted. Only exists in CM codebase.
Useless. The default execution mode is usually JIT anyway.
Set it to ro.media.enc.hprof.vid.bps=20000000 instead. The camera supports 20Mbps video fine.
Busted. There's no point doing this, most app developers optimise their apps to go below this anyway.
This was above anyway, busted.
This was above too. Also busted.
Deja vu! Busted! Deja vu again!
Busted. Does nothing for Google services. ro.config.htc.nocheckin=1 will disable HTC checkin though.
What's deeper than deep sleep also, I seem to have seen this somewhere before lol
Actually, this causes wifi to scan every 180ms, which is more than what people usually need it to, so it actually scans more frequently than default. A better value would be 250 or so.
Motorola only.
I don't think this does anything because the syntax is wrong. It should be dalvik.vm.dexopt-flags=m=y, if this even does anything at all.
I saw this somewhere up there.
Anyway, I've shown you here what works and what does not. I omitted those that I'm not sure about. Unsurprisingly, most don't work. So... this is more or less useless for the HTC One X.
Click to expand...
Click to collapse
you have some think new to add to you sign now cheers
One of the sources of scrolling lag / stuttering in Stock Launcher is the scrolling cache (http://forum.xda-developers.com/showthread.php?p=43903601).
If you want it smoother, just add this one line to build.prop: persist.sys.scrollingcache=4
(1=cache always on // 2=cache on many times // 3=cache off many times // 4=cache always off). Maybe you wish to add also the following lines, after backup the original build.prop:
debug.performance.tuning=1
video.accelerate.hw=1
ro.min_pointer_dur=1
Finally, where is written: debug.composition.type=dyn, You could change it to:
debug.composition.type=gpu (but this last change perhaps isn't ideal for some apps, and maybe it uses more battery than the default "dyn" option). Reboot and wait 4 minutes.
Keep in mind that a butter experience is a goal very difficult to achieve. I think that one reason why many users prefer some other launchers is that stock launcher is one of the few ones that support Sony advanced (and heavy) widgets. More heavy widgets (I'm sad to admit it) means more lags.
Edit:
Sorry to say that, but I'm restoring the original stock. I've tried many, many mods in build.prop, and although I saw some improvements, they're little ones, so I'll wait for the smoother Android 4.3 and its 1080p full support (with faster redraw and OpenGl ES 3.0).
Tested and i see a little improvement.. Less lag now.. Thanks!
Sent from my C6502 using xda app-developers app
What do we put in the property key line ?
Never mind I found out I have to input it and now it works flawlessly.
Let's trying to find the perfect build.prop...
Andre Verissimo said:
Maybe you wish to add also the following lines, after backup the original build.prop:
debug.performance.tuning=1
video.accelerate.hw=1
ro.min_pointer_dur=1
Finally, where is written:
debug.composition.type=dyn
You could change it to:
debug.composition.type=gpu
Click to expand...
Click to collapse
this is for ? to optimize GPU ?
kickthefreak said:
this is for ? to optimize GPU ?
Click to expand...
Click to collapse
Hi.
video.accelerate.hw=1 supposedly enables hardware acceleration (debug.sf.hw=1 is already in our default build.prop).
ro.min_pointer_dur=1 supposedly defines the min duration between two pointer events.
debug.performance.tuning=1 and video.accelerate.hw=1 suposedly "increase overall touch responsiveness".
Quoting another thread, "dyn" allows the system to dynamically chose whether to use GPU chipset or software for graphics rendering. "gpu" forces the use of the GPU. This is OK for the launcher, but might not be the optimal setting for some apps, and may cause more graphics artifacts like we used to see in the top left-hand corner of the apps drawer." Also, "gpu" seems to increase the battery use. So, each one must decide for himself if he prefers "gpu" or "dyn".
how can I access build.prop? do i copy paste those codes?
TinySarabia said:
how can I access build.prop? do i copy paste those codes?
Click to expand...
Click to collapse
By using build prop editor and you can't copy it
TinySarabia said:
how can I access build.prop? do i copy paste those codes?
Click to expand...
Click to collapse
Sorry to say that, but I'm restoring the original stock. I've tried many, many mods in build.prop, and although I saw some improvements, they're little ones, so I'll wait for the smoother Android 4.3 and its 1080p full support (with faster redraw and OpenGl ES 3.0).