Develop Bugs

Getting error on new update LG8

I got the little pop up that there was an update so I installed it and it said the phone was going to boot in 6 seconds or whatever, after that the phone booted into CWM and it said it failed install. Now every time I check for an update it says there's no update right now. Am I the only one with this problem? How do I fix it? Is it because I'm rooted? I'm on the stock rom by the way.

jordan23945bulls said:
I got the little pop up that there was an update so I installed it and it said the phone was going to boot in 6 seconds or whatever, after that the phone booted into CWM and it said it failed install. Now every time I check for an update it says there's no update right now. Am I the only one with this problem? How do I fix it? Is it because I'm rooted? I'm on the stock rom by the way.
Click to expand...
Click to collapse
Yes, it is because you are rooted. Download the stock rooted DeOdex one done by freeza. Good stuff.
Sent from my SPH-L710 using xda premium

Naddict said:
Yes, it is because you are rooted. Download the stock rooted DeOdex one done by freeza. Good stuff.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I need to flash the Lg8 firmware and Other parts? Or does it not work if I don't? I have never flashed anything using Odin, could I get steps? Thanks. Also what if I want to flash another rom? Do I need to flash the lg8 firmware and other parts again?

jordan23945bulls said:
I need to flash the Lg8 firmware and Other parts? Or does it not work if I don't? I have never flashed anything using Odin, could I get steps? Thanks. Also what if I want to flash another rom? Do I need to flash the lg8 firmware and other parts again?
Click to expand...
Click to collapse
see here http://forum.xda-developers.com/showthread.php?t=1743923
you don't need to flash the modem if you don't want to. Although I think (opinion only, and they vary between user) LG8 is a very good modem right now.
Once you flash modem, you will keep it until you revert or flash a newer modem or a rom specifically tells you it also provides it.

Naddict said:
see here http://forum.xda-developers.com/showthread.php?t=1743923
you don't need to flash the modem if you don't want to. Although I think (opinion only, and they vary between user) LG8 is a very good modem right now.
Once you flash modem, you will keep it until you revert or flash a newer modem or a rom specifically tells you it also provides it.
Click to expand...
Click to collapse
Alright, so I don't need to flash the moden or the other parts if I'm flashing an lg8 rom.

Naddict said:
Yes, it is because you are rooted. Download the stock rooted DeOdex one done by freeza. Good stuff.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
So flash the DeOdex version via CWR.
Then flash the Modem.zip via CWR.
Then use Odin and flash "Other Parts" .tar file and that's it?
Will there be any differentiation between going this route versus unrooting -> OTA update -> re-rooting?

The way I flash I got the legit update and flash with custom recovery and before the reboot flash the team win root file and ur done then reboot and ur done u have the hole update and firmware and radio and rooted and u keep your custom recovery
Sent from my SPH-L710 using xda premium

How to update new at&t ota?

I know there was a thread for this but I can't find it and this thing trying to get me to update is getting old. Can anyone point me in the right direction to the thread or help me out
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Are you rooted ? What recovery? Etc need more info man
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

yes im rooted sorry. as far as i know its clock work mod. how do u tell what recovery? never done that

bjballar41 said:
I know there was a thread for this but I can't find it and this thing trying to get me to update is getting old. Can anyone point me in the right direction to the thread or help me out
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Having a hard time understanding what you want...you don't know what recovery you're on? Boot into recovery and it'll say at the top what version you're on...
if you want the lastest OTA...flash through ODIN.. here..
http://forum.xda-developers.com/showthread.php?t=1737848
OR are you trying to disable the notification update? if so, use TiBu to freeze AT&T Software update under Application Manager> All...

defnow said:
Having a hard time understanding what you want...you don't know what recovery you're on? Boot into recovery and it'll say at the top what version you're on...
if you want the lastest OTA...flash through ODIN.. here..
http://forum.xda-developers.com/showthread.php?t=1737848
OR are you trying to disable the notification update? if so, use TiBu to freeze AT&T Software update under Application Manager> All...
Click to expand...
Click to collapse
If you want to stay rooted, flash the LG1 package from here: http://forum.xda-developers.com/showthread.php?t=1739426. That post also has the GoogleQuickSearchBox app from LEM if you want to put back universal search.

Yup, I had the "update available" notification, then updated to UCALG1 and still have root and so far I haven't been bothered by another update notification.

let me try and clear things up sorry for the confusin, i am rooted and want to stay rooted. at&t sent that ota update about a month ago i guess now and it ask me to update when i try and update it starts to the restarts phone and sends me to recovery and i reboot system and it says update failed. id like to update it if i can keep root but not sure how to do that. my recovery is cwm-based recovery v5.5.04. i know there is a work around i think it has to do with the odin but i have no idea how to do that one. phone specs are baseband version i747uclem. kernel is 3.0.8-599060-user build number is imm75d.i747ucalem im not sure ill miss the universal search as i dont believe i use it if it just takes away the widget.

Here's my experience:
Got AT&T SGS3 from local retailer. It had I747UCALEM ROM.
Restored stock kernel via method in [Root]/[Restore]Our ATT SGS3 Tested working! thread using ODIN.
Installed ClockworkMod
Flashed rooted I747UCALEM ROM from [HOWTO] [ROOT] No Tripping Flash Counter - Updated [ATT / Bell / Telus / Rogers] thread using ODIN
Verified root via SuperUser and Titanium Backup
Installed ClockworkMod Touch for AT&T from [HOWTO] [ROOT] No Tripping Flash Counter - Updated [ATT / Bell / Telus / Rogers] thread in the Third, (optional) section.
A few days later, I got an AT&T Software Update notification.
I tried to apply the update, and it rebooted and told me the update could not be applied, so I told it to Postpone.
About a week later or so it nagged me again, so I revisted the [HOWTO] [ROOT] No Tripping Flash Counter - Updated [ATT / Bell / Telus / Rogers] thread and noticed the I747UCALG1 rooted ROM was available.
I downloaded the I747UCALG1 rooted ROM and applied via ODIN
After application, checked root again, and still rooted
All good (as far as I can tell), and no more AT&T Software Update nags! Now I know to freeze the app via Titanium Backup if I have the problem again, or probably I should just freeze it regardless so it stops checking period.
So in your case since you're already rooted on I747UCALEM like I was, I think all you need to do is apply the I747UCALG1 rooted ROM via ODIN and you'll be good like me.
Hope that helps clear things up for you.

So not sure if i know to do it but i think u download file to computer and open in Odin put phone in download run Odin go to recovery unzip file. Correct me if I'm wrong
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Pretty much you got it. Just remember to extract the tar and use PDA mode in ODIN.
The instructions in the Second, section of the [HOWTO] [ROOT] No Tripping Flash Counter - Updated [ATT / Bell / Telus / Rogers] thread, that's what I followed. It tells you exactly what you need to do.

What is tar?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Sorry, extract the tar file out of the .7z file, you don't need to do anything with the tar file beyond feeding it to ODIN. Just don't try to feed the .7z file to ODIN as it won't know what to do with it.
But if you're insanely curious, tar is a tape archive file from the *nix days, it's a concatenation of files and their attributes.
More on tar on Wikipedia

i noticed on the other thread it says u can stop at a certain point if u arent gonna flash roms. im not sure im going to on this phone yet or not can i go back and do the third step if i decide i wanna do roms or would i be better off going ahead and going all the way thorugh? or do i even have to since i already have clockworkmod?

As I understand things, because you're rooted already (or maybe because we have clockworkmod), the standard AT&T update doesn't work. Regardless, if out did work we'd lose root in the update.
The AT&T update check still runs in the standard (rooted) ROM so you are getting nagged about the newer version.
So...
OPTION A - UPDATE AND KEEP ROOT
If you want to update and keep root, you need to manually apply the newest rooted stock ROM from the thread with ODIN.
Once you do that the AT&T updater should see your ROM is current and will stop nagging.
OPTION B - DON'T UPDATE AND KEEP ROOT
Freeze the AT&T software update application from Titanium Backup.
Then you won't be nagged about the software update anymore.
You won't have the newest ROM but at least you keep root.
OPTION C - LOSE ROOT AND UPDATE LIKE STOCK PEOPLE DO
I haven't looked into unrooting so I can't tell you how to do this one, but you'd be back to "normal people" world.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

i wanna do option a but i was talking like a c10 rom or something like that miui stuff like that

bhiga said:
OPTION C - LOSE ROOT AND UPDATE LIKE STOCK PEOPLE DO
I haven't looked into unrooting so I can't tell you how to do this one, but you'd be back to "normal people" world.
Click to expand...
Click to collapse
For this you'd flash a non-rooted, stock ROM through ODIN.

UNROOT sgh-t999v

i need to unroot my s3 for warranty purposes but i cannot find proper procedures for the the model sgh-t999v..
i have 2 questions,
1. can i just root a stock rom for sgh-t999 to my sgh-t999v?
2. anyone have the procedures to unroot my sgh-t999v
thanks

Flash a stock rooted Rom. T-Mobile one. That seems to be ok as long as you don't flash a T-Mobile radio.
Not sure if triangle away works on the Canadian version.
Maybe someone else has tried it.
All I had to do to return my last one was flash a stock rooted Rom.
I don't think they check the flash counter
Sent from my SGH-T999 using xda premium
---------- Post added at 08:52 AM ---------- Previous post was at 08:48 AM ----------
If the Rom has some T-Mobile bloat left on it get it off there.
Hide superuser in a folder
Sent from my SGH-T999 using xda premium

Thanks, ill try it tonight
Sent from my SGH-T999V using xda app-developers app

Or you can download the actual fw for your device. You will have to register but its no big deal.
Www.sammobile.com/firmware
11 Years Ago Today...
WE WILL NEVER FORGET!!!
GOD BLESS AMERICA!!!​

I can see you have a Videotron Galaxy S3. They don't check the flash counter. Let's just say I know this "by experience". As long as it's just rooted and you don't have any custom ROM, you should be fine. But indeed if you can at least hide the SU app it would be a good thing.
You could also perform a factory reset in CWM prior to going to the store, as they will make you do it anyways (and you actually don't want them to see the CWM screen)prior to any exchange. It's company policy.

lightpsycho said:
I can see you have a Videotron Galaxy S3. They don't check the flash counter. Let's just say I know this "by experience". As long as it's just rooted and you don't have any custom ROM, you should be fine. But indeed if you can at least hide the SU app it would be a good thing.
You could also perform a factory reset in CWM prior to going to the store, as they will make you do it anyways (and you actually don't want them to see the CWM screen)prior to any exchange. It's company policy.
Click to expand...
Click to collapse
It's still probably safer to just use Triangle Away to get rid of the flash counter

Triangle away? Please explain
Sent from my SGH-T999V using xda app-developers app

yukuansu said:
Triangle away? Please explain
Sent from my SGH-T999V using xda app-developers app
Click to expand...
Click to collapse
Heres everything to know about triangle away, it resets the flash counter...
http://forum.xda-developers.com/showthread.php?t=1494114
Jake

T-Mobile & SGH-T999V
Hi,
Can we use the T-Mobile stock recovery on SGH-T999V?

flyerspat said:
Hi,
Can we use the T-Mobile stock recovery on SGH-T999V?
Click to expand...
Click to collapse
If your trying to go back to stock, just download the stock rom from sammobile, it has everything you need like stock recovery, and then just flash it via odin.

htc fan89 said:
If your trying to go back to stock, just download the stock rom from sammobile, it has everything you need like stock recovery, and then just flash it via odin.
Click to expand...
Click to collapse
Hi,
The only downloads availables are the firmwares, does it include the stock recovery in it?

flyerspat said:
Hi,
The only downloads availables are the firmwares, does it include the stock recovery in it?
Click to expand...
Click to collapse
Yes it should be the full fw which includes radio, recovery and more.
Sent from my SGH-T999 using xda app-developers app

Thanks!
I'll test it tonight, wouldn't look good to download a 700 mb file at work!

I tried a few firmwares, but for some reason they all said "unsupport dev_type" when trying to use odin to return to stock non root (from stock rooted) In the end, the easiest way to remove root was to just let Kies update my gs3 to Jelly Bean (sgh-t999v). Painless, no data loss, took about 30 minutes with the firmware download.
Good luck

You will likely also want to triangle away. I won't link because it's extremely dangerous software that requires you to read up on the risks.
But that will reset your custom flashes assuming you have some on your counter you can check easily by going into download mode.

i recently lost my stock rom backup.. deleted it off clockworkmod touch by accident, so i only have the cm10.1 nightly i was running when i deleted it.. now i'm assuming i will lose root if i flash the stock firmware through odin? is there another way to get my stock rom back without losing root (and cyanogenmod rom backups)?

hey guys im having trouble with triangle away on my sgh-t999v with the baseband version: T999VVLUFNF1
after I used triangle away and I go into download mode it says:
current binary: Samsung Official
System status: official
qualcomm secureboot:enable
Warranty Bit:1
Bootloader AP SWAEV: 2
Although the current binary and the system status have changed the warranty bit is still at 1
Please help!

There is no way (and never will be a way) to change the Warranty Bit. Sorry

DocHoliday77 said:
There is no way (and never will be a way) to change the Warranty Bit. Sorry
Click to expand...
Click to collapse
I guess im screwed for warranty..I thought it might be cuz I have a custom kernal installed that triangle away didnt work..but thanks anyway and sorry about posting in multiple threads, im kinda new to this

No problem, thats why i mention it, so you know for the future.
Tecnically, with the warranty bit tripped, the warranty is void. However, i have seen a lot of posts where people sent it in anyway and their warranty was still honored. Its not a guarantee, but there is hope it can be used if needed. The good thing though, is you most likely will never need to use it anyway!

how to root latest MD5?

I'm pretty good when to comes to rooting, I just odin to stock and upgraded to
latest (MD5), but I didn't take into consideration that there's not a pre-rooted tar file out, I really hate to odin back to UVLC to root and then upgrade... anyone have any idea how to root it?

There's a rooted file already ..
Sent from my SGH-T999 using xda premium

re: root
Mr_Jay_jay said:
I'm pretty good when to comes to rooting, I just odin to stock and upgraded to
latest (MD5), but I didn't take into consideration that there's not a pre-rooted tar file out, I really hate to odin back to UVLC to root and then upgrade... anyone have any idea how to root it?
Click to expand...
Click to collapse
This new upgrade is pre-rooted.
No need to root it at all.
Here is the direct download link for the new Samsung Galaxy S3 T999 Official 4.1.2 stock rooted Jellybean rom:
- http://www.androidfilehost.com/?fid=22946563261203914
Just flash it using cwm or twrp like any other zipfile rom.
Good luck!

Misterjunky said:
This new upgrade is pre-rooted.
No need to root it at all.
Here is the direct download link for the new Samsung Galaxy S3 T999 Official 4.1.2 stock rooted Jellybean rom:
- http://www.androidfilehost.com/?fid=22946563261203914
Just flash it using cwm or twrp like any other zipfile rom.
Good luck!
Click to expand...
Click to collapse
That's the thing.. I'm pure stock.. I don't have a recovery, I tried to odin a recovery, but it wont stick since I'm not rooted...

re: sure way to root the first time.
Mr_Jay_jay said:
That's the thing.. I'm pure stock.. I don't have a recovery, I tried to odin a recovery, but it wont stick since I'm not rooted...
Click to expand...
Click to collapse
Here is a step by step guide:
Easy and sure way to root your phone - Here is s step by step guide:
After you have followed these instructions your phone will be in the same condition
as it was the day you have purchased it except with the benefit of being rooted.
Download the stock-rooted Samsung Galaxy S3 Jellybean v4.1.1 T999 firmware: http://www.androidfilehost.com/?fid=9390169635556426451
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to take a long time on first boot, this is normal so you must be very patient!!!)
Good Luck!

Misterjunky said:
This new upgrade is pre-rooted.
No need to root it at all.
Here is the direct download link for the new Samsung Galaxy S3 T999 Official 4.1.2 stock rooted Jellybean rom:
- http://www.androidfilehost.com/?fid=22946563261203914
Just flash it using cwm or twrp like any other zipfile rom.
Good luck!
Click to expand...
Click to collapse
Hello curious i used that file from that link but the update is good but the baseband version is still t999UVDLJC any idea how i can get onto the new baseband version. My build is new JZ054K.T999UVDMD5 but baseband is old still.

re: baseband
indnracn2 said:
Hello curious i used that file from that link but the update is good but the baseband version is still t999UVDLJC any idea how i can get onto the new baseband version. My build is new JZ054K.T999UVDMD5 but baseband is old still.
Click to expand...
Click to collapse
The reason is that Jody (the developer) removed the new RADIO/MODEM image
from the rom so everyone including those people who have AT&T Unlocked phones
can use the rom.
If you want the original baseband/modem/radio cwm/twrp flashable zipfile here
is the UVDMD5 Radio/Baseband Download Link - http://db.tt/RgrCGufl
Only flash this if you have a Samsung Galaxy S3 T999 device and you have Tmobile service.

You can root same way as all prevouse stock ROMs. Install custom recovery with Odin and then flash superuser in recovery.
Sent from my SGH-T999 using xda app-developers app

Except for one thing. After odin flashing recovery you cannot let the device restart. Everytime you boot up it checks for correct recovery and if its not there it rewrites it.
Sent from my SGH-T999 using xda premium

re: root
DocHoliday77 said:
Except for one thing. After odin flashing recovery you cannot let the device restart. Everytime you boot up it checks for correct recovery and if its not there it rewrites it.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
That's one of the main reasons I always suggest NOT to odin flash the stock T999 4.1.2 tar rom
but instead flash the cwm/twrp T999 pre-rooted deoxidized 4.1.2 rom which Jody setup for us.
People should have been warned about what you said before they allowed the OTA update to
upgrade their phones unless they don't want root access and want their phone to be pure stock.

Misterjunky said:
That's one of the main reasons I always suggest NOT to odin flash the stock T999 4.1.2 tar rom
but instead flash the cwm/twrp T999 pre-rooted deoxidized 4.1.2 rom which Jody setup for us.
People should have been warned about what you said before they allowed the OTA update to
upgrade their phones unless they don't want root access and want their phone to be pure stock.
Click to expand...
Click to collapse
Its all been covered pretty thoroughly, and all folks need to do is read! I know its asking an awful lot for some.
I haven't looked at jovys but there are two files that cause the recovery rewrite, and if he didnt remove them his rom will do the same.
If I remember right they are:
Install-recovery.sh
Recovery-on-boot.p
The second is wrong im pretty sure, but its something similar. Check my firmware thread and it should be there.
Hope that helps.
Sent from my SGH-T999 using xda premium

Misterjunky said:
That's one of the main reasons I always suggest NOT to odin flash the stock T999 4.1.2 tar rom
but instead flash the cwm/twrp T999 pre-rooted deoxidized 4.1.2 rom which Jody setup for us.
People should have been warned about what you said before they allowed the OTA update to
upgrade their phones unless they don't want root access and want their phone to be pure stock.
Click to expand...
Click to collapse
Still need to Odin stock to get the updated bootloader/rpm/tz. Unless you want to flash them yourself. That's why everyone suggests root66.

re: root66
DocHoliday77 said:
Its all been covered pretty thoroughly, and all folks need to do is read! I know its asking an awful lot for some.
I haven't looked at jovys but there are two files that cause the recovery rewrite, and if he didnt remove them his rom will do the same.
If I remember right they are:
Install-recovery.sh
Recovery-on-boot.p
The second is wrong im pretty sure, but its something similar. Check my firmware thread and it should be there.
Hope that helps.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I was just looking in your "Firmware/OTAs T999(V) Official, Leaked & Root66 FW & OTA Updates" thread
and downloaded the "root66_TMO_T999UVDMD5.7z" which is the pre-rooted Odin flash 4.1.2 firmware.
The reason I downloaded it is that I just want to have a odin flash rooted backup of 4.1.2 in case I need it in the future.
I wanted to ask if this firmware includes the modem/radio in the TAR file?
If it does, what is the filename of the modem/radio file? (I need to remove it).
My phone is an Unlocked AT&T I747 Galaxy S3 which I am using with Tmobile service and
I do not want to flash the modem/radio since it will not work with my phone.
Thanks.

Misterjunky said:
I was just looking in your "Firmware/OTAs T999(V) Official, Leaked & Root66 FW & OTA Updates" thread
and downloaded the "root66_TMO_T999UVDMD5.7z" which is the pre-rooted Odin flash 4.1.2 firmware.
The reason I downloaded it is that I just want to have a odin flash rooted backup of 4.1.2 in case I need it in the future.
I wanted to ask if this firmware includes the modem/radio in the TAR file?
If it does, what is the filename of the modem/radio file? (I need to remove it).
My phone is an Unlocked AT&T I747 Galaxy S3 which I am using with Tmobile service and
I do not want to flash the modem/radio since it will not work with my phone.
Thanks.
Click to expand...
Click to collapse
Modem is NON-HLOS.bin. Can't remove it, because the md5 check will fail.

Maybe ask mrrobinson if he can give you any pointers on how to remove it correctly. The steps he uses to create root66 would likely work to remove the modem as well.
Do you have the same partition layout as us? If not, dont use any of the firmware. If so you can always flash it and then flash your correct radio after.
Sent from my SGH-T999 using xda premium

re: md5
Aerowinder said:
Modem is NON-HLOS.bin. Can't remove it, because the md5 check will fail.
Click to expand...
Click to collapse
What if I remove the .MD5 from the filename ?
I don't think that Odin requires the .MD5 extension, I know I have Odin flashed
roms a while back which did not have an MD5.
---------- Post added at 08:14 PM ---------- Previous post was at 08:07 PM ----------
DocHoliday77 said:
Maybe ask mrrobinson if he can give you any pointers on how to remove it correctly. The steps he uses to create root66 would likely work to remove the modem as well.
Do you have the same partition layout as us? If not, dont use any of the firmware. If so you can always flash it and then flash your correct radio after.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I am sure I have the same partition layout, I am using the cwm/twrp flashable zipfile of the pre-rooted UVDMD5 T999 4.1.2 rom.
Before I got the Unlocked AT&T Galaxy S3 I had the galaxy S2 which I used with AT&T network and flashed the
root66 Odin flash roms before and had no problems, but since I am with Tmobile now I need to remove the radio file.
Since I am with Tmobile now, I never odin flashed roms due to the fact that they all contain the radio file.

Mobile Odin will flash without the md5 extension. Cant remember for sure with pc odin. I may try it later tonight to see for sure. You can also deselect the modem when flashing via M.O. in case you didnt know, though
I am also pretty sure you have the same layout as the t999. I appreciate you taking the time to do it in a way that is safe and wont brick!
I do think you would be ok to flash the full fw though, just make sure you have a copy of the correct modem and flash it right after.
Ill let you know for sure about the md5 after I get home and try it out.
Sent from my SGH-T999 using xda premium

re: modem
DocHoliday77 said:
Mobile Odin will flash without the md5 extension. Cant remember for sure with pc odin. I may try it later tonight to see for sure. You can also deselect the modem when flashing via M.O. in case you didnt know, though
I am also pretty sure you have the same layout as the t999. I appreciate you taking the time to do it in a way that is safe and wont brick!
I do think you would be ok to flash the full fw though, just make sure you have a copy of the correct modem and flash it right after.
Ill let you know for sure about the md5 after I get home and try it out.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thanks, I just wanted to save a few steps and not have to flash the AT&T stock modem if I don't have to.

Hey man, didnt want to leave you hanging. Im not going to get to try odining without the md5 tonight. Definitely tomorrow though. Just has got too late too fast and my eyes are crossing from lack of sleep!
Ill get on everything by early afternoon for sure.
Sorry if ive kept you waiting on me for anything. But I haven't forgotten!
Sent from my SGH-T999 using xda premium

Cant get phone back to stock

sorrry if this is the wrong area to post this..
im soon to do an upgrade august 3rd and i have been trying to get my s4 back to stock but when i odin to the official stock rom it fails every time and i cant seem to get anything to flash but never had a problem before.
if anybody could help it would be much appreciated :good:

Have you tried using a custom recovery such as TWRP or CWM?
Sent from my Galaxy S2 using XDA Free

Lincoln99 said:
Have you tried using a custom recovery such as TWRP or CWM?
Sent from my Galaxy S2 using XDA Free
Click to expand...
Click to collapse
haha actually no i didnt have the file on my phone but ill put it on this sd and see what happens.
i downloaded a few official firmwares does it matter which one exactly?

Not sure, but I would suggest using the latest.
Sent from my Galaxy S2 using XDA Free

Yeah use latest.. If you are on 4.3 or up you will get a fail every time you flash an older firmware

serio22 said:
Yeah use latest.. If you are on 4.3 or up you will get a fail every time you flash an older firmware
Click to expand...
Click to collapse
i installed twrp and then tried flashing. still saying fail no md5 or something

Turn off MD5 checking.
Sent from my Galaxy S2 using XDA Free

Lincoln99 said:
Turn off MD5 checking.
Sent from my Galaxy S2 using XDA Free
Click to expand...
Click to collapse
already not checked in settings of twrp

micky14x360 said:
i installed twrp and then tried flashing. still saying fail no md5 or something
Click to expand...
Click to collapse
You can't flash firmware with twrp, you need to use Odin

serio22 said:
You can't flash firmware with twrp, you need to use Odin
Click to expand...
Click to collapse
even if i leave in zip?
well where could i get a stock rom to flash in twrp cuz odin obviously dont wanna work for me

all help is much appreciated too !:good:

Could I have a link to the firmware?
Sent from my Galaxy S2 using XDA Free

micky14x360 said:
even if i leave in zip?
well where could i get a stock rom to flash in twrp cuz odin obviously dont wanna work for me
Click to expand...
Click to collapse
Yeah it won't.. And are you sure you are flashing the latest firmware? Also make sure that you have kies uninstalled.. I'm not sure if there is a flashable pure stock ROM but if there is it would be in the development threads

hey guys, I am also interested in reflashing stock. I believe I have a backup on my phone, but don't know how to install it anymore. I know there used to be a thread on how to return to stock but I can no longer find it. Can anyone link me to the "how to reflash to stock" thread
I am currently running the wicked rom v10 and having a lot of radio issues.
here is what I have
android version 4.3
baseband: m919uvuamdl
kernal version 3.4.76--KT-SGS4-JB4.3-TW-TMO-01.13.2014---gaab917b
build number: wicked v10

Lincoln99 said:
Could I have a link to the firmware?
Sent from my Galaxy S2 using XDA Free
Click to expand...
Click to collapse
i grabbed the latest from sammobile
but link http://www.sammobile.com/firmwares/3/?download=26608

serio22 said:
Yeah it won't.. And are you sure you are flashing the latest firmware? Also make sure that you have kies uninstalled.. I'm not sure if there is a flashable pure stock ROM but if there is it would be in the development threads
Click to expand...
Click to collapse
yea its the latest one . i went to the flash to stock triangle away thread and even the firmware they gave wasnt working

somehow got odin to flash a firmware. about to see if i can get this thing to stock now

ok so i did everything and got it back to stock . in download mode it say knox warranty void 0x1 will that fuk anything up with t mobile?

no1udknow said:
hey guys, I am also interested in reflashing stock. I believe I have a backup on my phone, but don't know how to install it anymore. I know there used to be a thread on how to return to stock but I can no longer find it. Can anyone link me to the "how to reflash to stock" thread
I am currently running the wicked rom v10 and having a lot of radio issues.
here is what I have
android version 4.3
baseband: m919uvuamdl
kernal version 3.4.76--KT-SGS4-JB4.3-TW-TMO-01.13.2014---gaab917b
build number: wicked v10
Click to expand...
Click to collapse
Flash MK2 baseband
micky14x360 said:
ok so i did everything and got it back to stock . in download mode it say knox warranty void 0x1 will that fuk anything up with t mobile?
Click to expand...
Click to collapse
For warranty there haven't been reports of denial, but don't know about trading it in.. I don't think they will check though

Why not just factory reset? Probably the easiest way if you just want stock.