Related
Alright, so I have an i-747 (AT&T GS3) running AOKP Jellybean (8.28 build) with the KT747 kernel. I just tried to install Chainfire 3D using the automated installer, and when the phone rebooted, it stuck at the Samsung Galaxy S3 logo until I pulled battery. So I tried rebooting into CWM - same problem. And again with download mode. Even after pulling the battery for a good 5 minutes, nothing works. Am I bricked, or is there some fix for this?
If you can get into CWM your not bricked. If you haven't backed up your phone there is a good chance you will have to start fresh. Its always a wise decision to do a nandroid backup via cwm before doing anything major. Including installing chainfire.
Have you tried wipe/factory reset in CWM?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
g2tegg said:
If you can get into CWM your not bricked. If you haven't backed up your phone there is a good chance you will have to start fresh. Its always a wise decision to do a nandroid backup via cwm before doing anything major. Including installing chainfire.
Have you tried wipe/factory reset in CWM?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I made a nandroid just this afternoon, but I can't actually boot into CWM at all. As in, I turn on the phone (power+home+volume up), it gets to the Galaxy S3 logo and just hangs there. If I could get into CWM (or download mode) this would be about a 10 minute fix, but I'm kind of out of luck here.
Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.
HELP I have the same issue
Hey, Im stuck in the same situation and was wondering if you were able to get it into CWM mode?
MrPhantom31 said:
Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.
Click to expand...
Click to collapse
Hi, sorry to say but sounds like its bricked
Thanks
MrPhantom31 said:
Huh. After another battery pull, it let me boot into download mode. I'm gonna try to reflash to stock and hope for the best.
Click to expand...
Click to collapse
I doubt it's bricked if he got it into download mode. I'm sure he's flashed it and even got his wallpaper back up by now. Please let us know of you've managed to solve this or not MrPhantom.
Sent from my SGS3 i747m (Bell) on CM10 using TapaTalk2
delete post please
Curious?
I know its technically "Solved" but does anyone have any idea why this is happening? I have a Verizon GS3 and it's happening to me. I try to boot and it vibrates once and doesn't turn on. Recovery does the same thing. But going into Download mode works. Odin back to stock as we speak but I'm just curious what went wrong. I just did a clean install of a rom, set it all up (working at the time), set it down for the night and woke up to it like this.
rrrs444230 said:
Hey, Im stuck in the same situation and was wondering if you were able to get it into CWM mode?
Click to expand...
Click to collapse
Same thing happned to me but your not bricked. You can get into bolth download and boot mode easy
Here is how you do it.
RECOVERY MODE
Unplug the USB cable.
Shut down the phone.
Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
[edit]Download Mode
Save that somewhere. Make sure do it right. I got stuck also and thought I couldn't get into recovery but I had to do it right (it hit recovery mode first try) I have learned that most people do it slightly wrong. Make sure follow directions
Download mode
Unplug the USB cable.
Shut down the phone.
Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
To get out of Download Mode, simply press and hold the power button until the phone restarts
if helps hit thanks.
Just save that to a text file somewhere
I have also soft bricked when I deleted my rom once on accident. I dunno how I did it but I would get stuck at the TWRP screen. It wouldn't go to download or anything however when I plugged it into odin it saw it .... I even had a soft brick when screen went black from a bad boot animation and same thing.. and I had one bad soft brick where it took about 100 trys to get it into download mode (black screen) but odin detected it. I spent like 4 hours working on it.
I think
1. People don't follow directions correct (they do it a little wrong) which is enough if your phones messed up for it not to work.
when your phones normal it can get into recovery or download easy but when its sick you got to do it perfect.
2. I think something wrong with the phones (my s2 never had any issues in 2 years of owning it) S3 has tons of issues from usb, to bluetooth, to these soft bricks I have had)
3. Roms play a big part
4. I also think the way storage works in this new phone causes lots issues I dunno why just what I think
anyway Like I said now when I have a isssue I open text and read it and make sure I do it right and 95 percent of the time it was my fault I wasn't doing it right. K just my thoughts
when i try this on my verzion s3 it wont load back into the CWM after installed to finish rooting. it just goes back into the android system recovery. tried it about 10 times and nothing different
phatchef1 said:
when i try this on my verzion s3 it wont load back into the CWM after installed to finish rooting. it just goes back into the android system recovery. tried it about 10 times and nothing different
Click to expand...
Click to collapse
That's most likely cause you're not in the right section..: http://forum.xda-developers.com/forumdisplay.php?f=1708
I have sprint Galaxy s3 with jelly bean rooted. On new years eve I installed a 3rd party app from the market to see if I could get a hot spot. don't even remember the name of the app. I ran it and it locked my phone up. I pulled the battery and when it rebooted it was in safe mode. In safe mode I uninstalled the program but it did not help me at all. Any time I reboot it goes right to safe mode. I have tried several times to get to download mode and recovery mode and have not been able to reach either. The phone works fine in safe mode I could even do a factory reset and with no problem the phone resets and goes right back to safe mode when it boots up to the new factory set up. No 3rd party apps are seen and no download mode or recovery mode can be obtained in the usual ways we use to boot to them. I am stumped any ideas from anyone.
Try use kies!
Hi. You can try this method.
1- get or make a usb jig
0r
2- turn off your s2. Pull the batt out for 10 sec and press on button w/out inserting the batt.
After doing that, try to boot into download mode. Sometimes yhe phone need some rest,juat pull out the batt for 5-10min and retry. I suggest that you try to enter recovery mode before heading to download mode..
Sent from my GT-I9070 using xda app-developers app
BlackCl0udMY said:
Hi. You can try this method.
1- get or make a usb jig
0r
2- turn off your s2. Pull the batt out for 10 sec and press on button w/out inserting the batt.
After doing that, try to boot into download mode. Sometimes yhe phone need some rest,juat pull out the batt for 5-10min and retry. I suggest that you try to enter recovery mode before heading to download mode..
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
That could be the problem.. "turn off your s2" He may fix that one.. But the S3 will still be broke :laugh:
safe mode
BlackCl0udMY said:
Hi. You can try this method.
1- get or make a usb jig
0r
2- turn off your s2. Pull the batt out for 10 sec and press on button w/out inserting the batt.
After doing that, try to boot into download mode. Sometimes yhe phone need some rest,juat pull out the batt for 5-10min and retry. I suggest that you try to enter recovery mode before heading to download mode..
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
it always gets as far as the warning screen when going to download mode. when pressing volume up or down nothing happens. I have to long press start key or pull battery to get it out of the warning screen
patrick6465 said:
it always gets as far as the warning screen when going to download mode. when pressing volume up or down nothing happens. I have to long press start key or pull battery to get it out of the warning screen
Click to expand...
Click to collapse
Strange. I haven't seen any do this before.. So it'll stick at the download totally? Hmm.. can you get to recovery now?
safe mode
milky1112 said:
Strange. I haven't seen any do this before.. So it'll stick at the download totally? Hmm.. can you get to recovery now?
Click to expand...
Click to collapse
no not at all
patrick6465 said:
no not at all
Click to expand...
Click to collapse
Yeah, i'm at a loss, was gonna say if you can get into DL mode, then could odin to sock. I'm not sure of any other way to get around it and force that puppy to boot back into normal land.
Try this.. Power off phone... Restart, once you see Samsung logo, Press the Menu capacitive button repeatedly. (read this is how to get into safemode) maybe it'll work to reboot you OUT of safe mode. (Note i'm just searching the web to see if i can find anything) And i did pull that for a i9300 International, but it may work for this one as well.. (just a shot)
Seen another with similar issue, Pull SD and battery for 10 min.. When rebooted, went back to normal. Again these are all shots in the dark..
safe mode
milky1112 said:
Yeah, i'm at a loss, was gonna say if you can get into DL mode, then could odin to sock. I'm not sure of any other way to get around it and force that puppy to boot back into normal land.
Click to expand...
Click to collapse
Ya this is strange i've been searching all day on different forums and google and haven't seen any other posts with the same issue.
patrick6465 said:
Ya this is strange i've been searching all day on different forums and google and haven't seen any other posts with the same issue.
Click to expand...
Click to collapse
I found a few. Try those methods I posted. lemme know if they work.
safe mode
milky1112 said:
Yeah, i'm at a loss, was gonna say if you can get into DL mode, then could odin to sock. I'm not sure of any other way to get around it and force that puppy to boot back into normal land.
Try this.. Power off phone... Restart, once you see Samsung logo, Press the Menu capacitive button repeatedly. (read this is how to get into safemode) maybe it'll work to reboot you OUT of safe mode. (Note i'm just searching the web to see if i can find anything) And i did pull that for a i9300 International, but it may work for this one as well.. (just a shot)
Seen another with similar issue, Pull SD and battery for 10 min.. When rebooted, went back to normal. Again these are all shots in the dark..
Click to expand...
Click to collapse
no go with this one either
patrick6465 said:
no go with this one either
Click to expand...
Click to collapse
May be time for a visit to your neighborhood Sprint store! Thats the only methods i found that might work.. Just searched for S3 stuck in safe mode.
patrick6465 said:
I have sprint Galaxy s3 with jelly bean rooted. On new years eve I installed a 3rd party app from the market to see if I could get a hot spot. don't even remember the name of the app. I ran it and it locked my phone up. I pulled the battery and when it rebooted it was in safe mode. In safe mode I uninstalled the program but it did not help me at all. Any time I reboot it goes right to safe mode. I have tried several times to get to download mode and recovery mode and have not been able to reach either. The phone works fine in safe mode I could even do a factory reset and with no problem the phone resets and goes right back to safe mode when it boots up to the new factory set up. No 3rd party apps are seen and no download mode or recovery mode can be obtained in the usual ways we use to boot to them. I am stumped any ideas from anyone.
Click to expand...
Click to collapse
You have the root, why not use it instead of sudo-randomly smashing keys *Grin* ? If you don't have a Terminal app install one of those, su to root (answer to allow root when Superuser/SuperSu asks you) then run "reboot recovery". When/If recovery comes up wipe Cache, Dalvik-Cache, fix permissions and so forth, then try to restart into the system and see if "Safe Mode" crap persist.
I had my phone come up in Safe Mode one time, can't remember what I played with to even trigger it though. If this doesn't work, you can use something like Rom Toolbox Pro, or another fun tool to wipe the caches while the phone is up in Safe Mode.
Happy Flashing,
sponix
sponix2ipfw said:
You have the root, why not use it instead of sudo-randomly smashing keys *Grin* ? If you don't have a Terminal app install one of those, su to root (answer to allow root when Superuser/SuperSu asks you) then run "reboot recovery". When/If recovery comes up wipe Cache, Dalvik-Cache, fix permissions and so forth, then try to restart into the system and see if "Safe Mode" crap persist.
I had my phone come up in Safe Mode one time, can't remember what I played with to even trigger it though. If this doesn't work, you can use something like Rom Toolbox Pro, or another fun tool to wipe the caches while the phone is up in Safe Mode.
Happy Flashing,
sponix
Click to expand...
Click to collapse
"No 3rd party apps are seen" Wouldn't Terminal be apart of this one? If so then he couldn't get into it. Just my guess. and those methods i posted were from others with same issue. Def worth a try. Never heard of Safe Mode on these till now Lol..
Are u sure none of your keys are stuck? Mine would do that if my case was holding in one of the keys IE volume key or power button
safe mode
fedge1234 said:
Are u sure none of your keys are stuck? Mine would do that if my case was holding in one of the keys IE volume key or power button
Click to expand...
Click to collapse
That is the one thing that has me questioning. The volume button seems to move freely however; I have tried volume button when booted up in safe mode and the volume down does not move. the volume up moved the volume control up. although when pressing vol. down when trying to go do download mode it boots to download warning screen. unless it is stuck on internally. I don't know, cause the button moves freely.
Mine was in safe mode once. All I did is reboot it and mine went away.
Galaxy S3- Cyanogenmod 10!
Nexus Style!
safe mode
xxXismakillXxx said:
Try use kies!
Click to expand...
Click to collapse
Thanks this d root is no longerdid help me make my decision . I am taking the phone to sprint store. by downloading and using keys it seems that the software does not cause my problem. I hooked up to kies and did a complete firmware upgrade. Although there is no upgrade it still reloaded jellybean. It did a complete restore though and root is no longer present. Super user is gone. But I still have the same safe mode issues. I am guessing that this is a hardware problem probably the volume key. I feel ok with taking it to sprint since root is gone. who knows maybe i'll get a new one. Thanks to all who helped I surely appreciate it.
Patrick
Did u reset flash counter before unroot?
safe mode
fedge1234 said:
Did u reset flash counter before unroot?
Click to expand...
Click to collapse
no not sure how to do that or if I would have been able too because of safe mode limitations.
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Can you Boot into download mode and Odin to stock?
Sent from my SM-N900T using XDA Premium 4 mobile app
I cannot. I have the battery of the phone out right now. As soon as i put the battery in the phone, it tries to reboot into recovery without me even pressing the power button. Then it again shuts off and tries to restart every 2-3 seconds.
Lawful123 said:
Can you Boot into download mode and Odin to stock?
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just some additional info, I flashed CWM recovery through Rom Manager. After flashing it, it asked to reboot the phone. As soon as the phone rebooted, i started having this issue.
I'm in a similar situation. I used to be able to use the phone controls (power-home-Vol Up) to be able to go into recovery mode, but even that has stopped functioning. The only way to get the phone to boot normally after that is to pull battery, put the phone in download mode and then cancel download mode to boot up normally.
re: download mode
hemal.mehta said:
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Click to expand...
Click to collapse
I think the only way to get your phone into download mode now would be
to get a USB Jig from eBay or some online store.
They are under $5 bucks shipped.
Once you have that you would simply remove the battery from your
phone and then plug in the Jig before putting the battery back in.
The usb Jig is basically meant to be used for those
phones which will not go into download mode any
other way.
I have a Jig and as soon as it's plugged into the phone when the phone
is powered down it goes into download mode within 2-3 seconds.
Soon as its in download mode you can remove the jig and start a
clean Odin flash of the official stock firmware for your phone.
Good luck!
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot
Thanks for that USB Jig suggestion. I guess that is my last hope.
Sent from my SM-N900T using XDA Premium 4 mobile app
Per suggestion from Misterjunky, I've now been successful in installing the Stock Tmobile 4.4.2 NB4 formware that I downloaded from sammobile. I used Odin 1.85 to install that on the Note 3. So far, the phone looks functional again.
So pressing power, vol down and menu doesn't get you into download? Have you tried holding them for at least 30 seconds?
I had this happen to me when I messed up flashing twrp. Pull the battery for 30 minutes, then put the battery in while holding power home and vol down.
That's what worked for me.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
I encountered the same issue after flashing CWM Touch to my SM-N900T (Note3-Aus) running Infamous Rom on the BioShock kernel. After being stuck in the loop for a fair while I removed the battery, went to grab a cup of tea before completely raging at the phone, went back and put the battery back in. The phone did not boot automatically this time, a good sign I thought to myself. I then went on to hold down VolumeDown + Home + Power to see if I could get into download mode. I successfully booted into download mode and selected the reboot option. My Note3 then went on to boot successfully. Hopefully this helps :fingers-crossed:
I recently had the same issue......heres step by step:
1. with the battery OUT, grab the usb and plug into phone and computer
2 press volume down, power, and home at the same time.you should be in download mode at this point, and just press volume up to get into download mode.
3. open kies. and at this point you'd want to restore back sto stock as follows:
4. go to tools, firmware upgrade and intialisation
5. follow the on screen direction and then just wait.
6. if you want to re root, then feel free to once the phone is up and running.
i have tried this method so many times and hasnt failed me yet. IF this has helped anyone, please press the thank you button! :laugh::fingers-crossed:
I resolved the problem by flashing the phone back to T-mobile stock using Odin. In my case, the recovery was corrupted and hence the issue. After flashing back to stock, I was then able to root and install a TWRP recovery successfully.
hemal.mehta said:
So i decided to flash CWM recovery on my Note 3 via CWM (I had phillz recovery installed already), now the phone just wont boot up. It keeps saying Recovery Booting above the Note 3 logo for 2 seconds, then the phone restarts again showing the same message. I pulled the battery out and then inserted it back in but it boots the phone automatically with the same recovery booting message and restarts every 2 seconds. I cannot boot into recovery or put the phone in Download mode. Have I finally screwed my phone up? Any help would be very appreciated.
Click to expand...
Click to collapse
I'm having the same problem, what I do is take out the battery put it back in and try to turn on the phone on recovery mode, and it will give me the option to restart the phone. Hope it works
Same problem has happened to me, do you guys know if the jigs are universal? The ones I see on amazon and ebay dont list the note 3 at all so I just want to be safe. Since upgrading to nf9 the recoveries have given me major issues, TWRP was really buggy so I switched back to CWM and this happens.
Scratch that, just rebooted. I would still like to know if its universal though, in case this happens again. Doesnt hurt to be prepared
You're a life saver, Thanks a ton
atlzonly89 said:
i recently had the same issue......heres step by step:
1. With the battery out, grab the usb and plug into phone and computer
2 press volume down, power, and home at the same time.you should be in download mode at this point, and just press volume up to get into download mode.
3. Open kies. And at this point you'd want to restore back sto stock as follows:
4. Go to tools, firmware upgrade and intialisation
5. Follow the on screen direction and then just wait.
6. If you want to re root, then feel free to once the phone is up and running.
I have tried this method so many times and hasnt failed me yet. If this has helped anyone, please press the thank you button! :laugh::fingers-crossed:
Click to expand...
Click to collapse
you're awesome, thank you so much
Note 3 (sm-n900w8) will not go into recovery mode after CWM Flash
Helllo Sorry if this is not in the proper place I have not had much experience posting.
my Phone is a Note 3 (sm-n900w8) Canada (rogers)
running Lollipop 5.0
base version n900w8vlu2doc4
kernel 3.4.0-4348112
[email protected]#1
build number ..... lrx21v.n900w8vlu2doc4
ap: n900w8vlu2doc4
I Flashed CF Auto root first (CF-Auto-Root-hltecan-hlteub-smn900w8.tar) All went well and I got root access
Then I Flashed CWM ( n900-cwm-recovery-6.0.5.0-kk_L5.0(0812)) and all seemed to go well but .. I could not get into
recovery mode. when I pressed vol up + Home + power key at the same time it went directly to download modes second screen..( the one that is ready for you to hit start on odin.) ...
I was able to reboot and try several times with the same result.
I then went and got the CWM app and tried to enter form there to only get stuck on the download mode without being able to reset.
then I flashed the CWM again and was back to being able to reset but not being able to get into recovery mode.
I updated CWM recovery setup from the app to the latest 6.0.4. and then tried to back up my current rom ... this let to a boot loop that said something like ..... Kernel is not seandroid enforcing...
once again I was able to get into download mode and had to re flash CWM and get back to my original problem ... not being able to get into download mode
Can anyone help me figure this out
Thanks
Greetings XDA Developers,
Newbie here. I own a Samsung Galaxy Tab S (SM T705). I was able to root it a few weeks ago and I decided to install a custom recovery (TWRP) using an app from the Playstore named "TWRP Manager". I didn't hesitate to do so using this method because I was able to install TWRP on my GT I9300 successfully from the past using this app. However, after being prompted by the app that the recovery was successfully installed and needs to reboot the device, my tab was stuck on start up screen ( See attached photo ). I tried long pressing the power button but nothing happened. I waited until the device ran out of battery and when it did, I plugged in the charger and I'm back at the same screen. After google-ing some possible solutions, I tried to boot it into recovery but was unsuccessful, however, I was able to boot into download mode.
I'd like to ask for the help of some "experienced" users in this forum on how to solve this problem. And if possible, I'm hoping that flashing a stock recovery using Odin wouldn't be my last resort.
Thank you in advance.
paul952102 said:
Greetings XDA Developers,
Newbie here. I own a Samsung Galaxy Tab S (SM T705). I was able to root it a few weeks ago and I decided to install a custom recovery (TWRP) using an app from the Playstore named "TWRP Manager". I didn't hesitate to do so using this method because I was able to install TWRP on my GT I9300 successfully from the past using this app. However, after being prompted by the app that the recovery was successfully installed and needs to reboot the device, my tab was stuck on start up screen ( See attached photo ). I tried long pressing the power button but nothing happened. I waited until the device ran out of battery and when it did, I plugged in the charger and I'm back at the same screen. After google-ing some possible solutions, I tried to boot it into recovery but was unsuccessful, however, I was able to boot into download mode.
I'd like to ask for the help of some "experienced" users in this forum on how to solve this problem. And if possible, I'm hoping that flashing a stock recovery using Odin wouldn't be my last resort.
Thank you in advance.
Click to expand...
Click to collapse
Your going to need some fast hands for this one! I've ran into this lots of times when testing kernels and such. Any force reboot by holding Power Button+ Home Button + BOTH Volume buttons all at the same time. Press and hold that combo until the screen goes black. Then once the screen goes black quickly press and hold Power Button+ Home Button + Volume down buttons all at the same time. You should no enter into download mode. You said that you drained the battery so I would suggest charging it in download mode for 30 minutes or so then flash TWRP with Odin.
Your going to need to flash stock recovery or TWRP with Odin to override the boot and get it working
The TWRP app doesn't always work in which is why I use Odin.
Sent from my SM-T800 using Tapatalk
As a side note for future reference, hard reset is simply hold POWER + VOL DOWN.
As said all you need do is boot to download mode and flash recovery.
If you're on lollipop you may need to immediately boot into recovery after flashing to make it stick.
ashyx said:
As a side note for future reference, hard reset is simply hold POWER + VOL DOWN.
As said all you need do is boot to download mode and flash recovery.
If you're on lollipop you may need to immediately boot into recovery after flashing to make it stick.
Click to expand...
Click to collapse
Hey, thanks for the heads up. But how exactly do I "immediately boot into recovery after flashing to make it stick." Since after I flash recovery via odin, it would obviously automatically reboot my device? sorry for the dumb question.
DUHAsianSKILLZ said:
Your going to need some fast hands for this one! I've ran into this lots of times when testing kernels and such. Any force reboot by holding Power Button+ Home Button + BOTH Volume buttons all at the same time. Press and hold that combo until the screen goes black. Then once the screen goes black quickly press and hold Power Button+ Home Button + Volume down buttons all at the same time. You should no enter into download mode. You said that you drained the battery so I would suggest charging it in download mode for 30 minutes or so then flash TWRP with Odin.
Your going to need to flash stock recovery or TWRP with Odin to override the boot and get it working
The TWRP app doesn't always work in which is why I use Odin.
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
Thank you for the solution mentioned above! However, just to further clarify things, what is the difference between "klimtwifi and klimtwifixx" ?
paul952102 said:
Thank you for the solution mentioned above! However, just to further clarify things, what is the difference between "klimtwifi and klimtwifixx" ?
Click to expand...
Click to collapse
Both are the same I think. Some people name it by our product name or device name (one has xx and one doesn't. Both are the same)
Sent from my SM-T800 using Tapatalk
paul952102 said:
Hey, thanks for the heads up. But how exactly do I "immediately boot into recovery after flashing to make it stick." Since after I flash recovery via odin, it would obviously automatically reboot my device? sorry for the dumb question.
Click to expand...
Click to collapse
You either be quick and hold POWER + HOME + VOL UP as soon as it reboots or you uncheck auto reboot in Odin then restart manually.
paul952102 said:
Thank you for the solution mentioned above! However, just to further clarify things, what is the difference between "klimtwifi and klimtwifixx" ?
Click to expand...
Click to collapse
So did the solution work? I am looking at a SM-T705 on ebay being sold for parts with similar symptoms. hoping I can fix it for a great bargain.
Lineage /Oreo was installed thru TWRP 3.xxx, running fine but unhappy , no Viper4Android , so I installed it as a module on Magisk,
after installing the driver, was ask to reboot as directed, but went into bootloop , stuck on a boot loop " Set Warranty Bit : kernel " top left corner and Samsung Galaxy Note 3 on screen ; I tried Vol Up +Home+ power combo and all other combi I could think but no luck , Odin wont recognize my phone, tried Samsung 300k tool with no luck, I fell like a newbie after using so many ROMs on all of my devices, I google how to get back to download mode but no luck, I need help to make my Samsung note 3 work again, PLEASE. THANKS.
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
AndroidHacker99 said:
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Isn't download mode volume down + home + power?
Aykee said:
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Click to expand...
Click to collapse
You need to take the battery out to force it out of the bootloop then push volume DOWN, home & power.
Sent from my SM-N900T using Tapatalk
audit13 said:
Isn't download mode volume down + home + power?
Click to expand...
Click to collapse
Sorry, I mean Vol down but no luck.
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Aykee said:
Sorry, I mean Vol down but no luck.
Click to expand...
Click to collapse
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
Sounds like a good idea, ordering on amazon..thanks
ludeawakening said:
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
Click to expand...
Click to collapse
I did all button combination, cant get into download nor recovery mode , am not sure if buttons are wack but it feel responsive and clicky but thanks anyway am going for the USB jig, I never had one.
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
I got the USB jig but nothing happen after plugging in, any other idea please?
Removed the battery, inserted the jig, and then inserted a charged battery?
audit13 said:
Removed the battery, inserted the jig, and then inserted a charged battery?
Click to expand...
Click to collapse
The jig that I bought didnt do anything so I make my own, I can go to download mode now, installed this ROM/firmware N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5 succesfully but wont go pass beyond the tmobile logo, tried a few more firmware and lately this N900TUVUFOL1 and also , am stuck to Tmobile logo, anybody knows which firmware would likely bring my note 3 back to life, thanks in advance.:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
audit13 said:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
Click to expand...
Click to collapse
After "reset" status, I did remove cable, remove batt and boot up to recovery, the blue light lit up as if its going to recovery mode , android logo showed up but phone boot up to normal but not pass beyond tmobile logo, so I did CF-root via odin , but still not booting to recovery.
Try flashing the entire ROM in AP.
audit13 said:
Try flashing the entire ROM in AP.
Click to expand...
Click to collapse
Thanks Audit13,
I manage to restore my Note 3 to TMobile Android 5 using repair firmware , it looks like I wipe out the partition ,My phone runs like new, am just wondering why I cant go to Download mode with button combinations of Volume -/Home/power , tried to install twrp via Odin, it says PASS but Vol +/Home/Power wont lead me to bootloader, did tried CWM , it will boot up but before I could start using it, it will reboot to normal and I could not go back to bootloader with button combo Vol+/Home/Power........HELP...
Download mode is volume down+home+power.
To flash TWRP with Odin, try this:
Open Odin and only check f reset time. Flash TWRP. When you see the word reset in the Odin status window, remove the USB cable from the phone, remove the battery, replace battery, press home + volume up + power.
N900TUVUFOB6_N900TTMBFOB6_TMB and N900 PIT - are the files am using after screwing up my partition( I dont know how I did that ), this Note 3 is running like a hot knife on a butter BUT the only bug I notice is Volume Up + Home + Power ( recovery) NOR Volume Down + Home + Power (download ) does not work, I can only go to download mode using a USB JIG and no other way. I can flash TWRP via Odin with Auto-reboot not ticked , so I could remove cable, battery , hoping to get me to recovery mode but I couldnt. Did I miss a step?I need help.